-
Simultaneous reweighting of Transverse Momentum Dependent distributions
Authors:
Mariaelena Boglione,
Umberto D'Alesio,
Carlo Flore,
Josè Osvaldo Gonzalez-Hernandez,
Francesco Murgia,
Alexei Prokudin
Abstract:
The Bayesian reweighting procedure is extended to the case of multiple independent extractions of transverse momentum dependent parton distributions (TMDs). By exploiting the data on transverse single spin asymmetries, $A_N$, for inclusive pion production in polarized proton-proton collisions measured at RHIC, we perform a simultaneous reweighting of the quark Sivers, transversity and Collins TMD…
▽ More
The Bayesian reweighting procedure is extended to the case of multiple independent extractions of transverse momentum dependent parton distributions (TMDs). By exploiting the data on transverse single spin asymmetries, $A_N$, for inclusive pion production in polarized proton-proton collisions measured at RHIC, we perform a simultaneous reweighting of the quark Sivers, transversity and Collins TMD functions extracted from semi-inclusive deep inelastic scattering (SIDIS) and $e^+ e^-$ annihilation into hadron pairs. The impact of the implementation of the Soffer bound, as well as the differences between older and newer $A_N$ data, are investigated. The agreement with $A_N$ data at large-$x_F$ values, a kinematical region complementary to those explored in SIDIS measurements, is enhanced, improving the knowledge of the polarized quark TMDs in the large-$x$ region.
△ Less
Submitted 15 May, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Phenomenology of TMD parton distributions in Drell-Yan and $Z^0$ boson production in a hadron structure oriented approach
Authors:
F. Aslan,
M. Boglione,
J. O. Gonzalez-Hernandez,
T. Rainaldi,
T. C. Rogers,
A. Simonelli
Abstract:
We present a first practical implementation of a recently proposed hadron structure oriented (HSO) approach to TMD phenomenology applied to Drell-Yan like processes, including lepton pair production at moderate $Q^2$ and $Z^0$ boson production. We compare and contrast general features of our methodology with other common practices and emphasize the improvements derived from our approach that we vi…
▽ More
We present a first practical implementation of a recently proposed hadron structure oriented (HSO) approach to TMD phenomenology applied to Drell-Yan like processes, including lepton pair production at moderate $Q^2$ and $Z^0$ boson production. We compare and contrast general features of our methodology with other common practices and emphasize the improvements derived from our approach that we view as essential for applications where extracting details of nonperturbative transverse hadron structure is a major goal. These include the HSO's preservation of a basic TMD parton-model-like framework even while accounting for full TMD factorization and evolution, explicit preservation of the integral relationship between TMD and collinear pdfs, and the ability to meaningfully compare different theoretical models of nonperturbative TMD parton distributions. In our examples, we show that there is significant sensitivity at moderate $Q^2$ to both the form of the nonperturbative transverse momentum dependence and the parametrization of collinear parton densities. However, we also find that evolving to $Q^2 = M_Z^2$, without fitting, results in a satisfactory postdiction of existing data for $Z^0$ production, nearly independently of the modeling of nonperturbative transverse momentum behavior. We argue that this demonstrates that moderate $Q$ measurements should be given greater weight than high $Q$ measurements in extractions of nonperturbative transverse momentum dependence. We also obtain new extractions of the nonperturbative Collins-Soper kernel within the HSO approach. We discuss its features and compare with some earlier extractions.
△ Less
Submitted 30 May, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Proof of principle for a self-governing prediction and forecasting reward algorithm
Authors:
J. O. Gonzalez-Hernandez,
Jonathan Marino,
Ted Rogers,
Brandon Velasco
Abstract:
We use Monte Carlo techniques to simulate an organized prediction competition between a group of a scientific experts acting under the influence of a ``self-governing'' prediction reward algorithm. Our aim is to illustrate the advantages of a specific type of reward distribution rule that is designed to address some of the limitations of traditional forecast scoring rules. The primary extension of…
▽ More
We use Monte Carlo techniques to simulate an organized prediction competition between a group of a scientific experts acting under the influence of a ``self-governing'' prediction reward algorithm. Our aim is to illustrate the advantages of a specific type of reward distribution rule that is designed to address some of the limitations of traditional forecast scoring rules. The primary extension of this algorithm as compared with standard forecast scoring is that it incorporates measures of both group consensus and question relevance directly into the reward distribution algorithm. Our model of the prediction competition includes parameters that control both the level of bias from prior beliefs and the influence of the reward incentive. The Monte Carlo simulations demonstrate that, within the simplifying assumptions of the the model, experts collectively approach belief in objectively true facts, so long as reward influence is high and the bias stays below a critical threshold. The purpose of this work is to motivate further research into prediction reward algorithms that combine standard forecasting measures with factors like bias and consensus.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
The resolution to the problem of consistent large transverse momentum in TMDs
Authors:
J. O. Gonzalez-Hernandez,
T. Rainaldi,
T. C. Rogers
Abstract:
Parametrizing TMD parton densities and fragmentation functions in ways that consistently match their large transverse momentum behavior in standard collinear factorization has remained notoriously difficult. We show how the problem is solved in a recently introduced set of steps for combining perturbative and nonperturbative transverse momentum in TMD factorization. Called a ``bottom-up'' approach…
▽ More
Parametrizing TMD parton densities and fragmentation functions in ways that consistently match their large transverse momentum behavior in standard collinear factorization has remained notoriously difficult. We show how the problem is solved in a recently introduced set of steps for combining perturbative and nonperturbative transverse momentum in TMD factorization. Called a ``bottom-up'' approach in a previous article, here we call it a ``hadron structure oriented'' (HSO) approach to emphasize its focus on preserving a connection to the TMD parton model interpretation. We show that the associated consistency constraints improve considerably the agreement between parametrizations of TMD functions and their large-$k_T$ behavior, as calculated in collinear factorization. The procedure discussed herein will be important for guiding future extractions of TMD parton densities and fragmentation functions and for testing TMD factorization and universality. We illustrate the procedure with an application to semi-inclusive deep inelastic scattering (SIDIS) structure functions at an input scale $Q_0$, and we show that there is improved consistency between different methods of calculating at moderate transverse momentum. We end with a discussion of plans for future phenomenological applications.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Basics of factorization in a scalar Yukawa field theory
Authors:
F. Aslan,
L. Gamberg,
J. O. Gonzalez-Hernandez,
T. Rainaldi,
T. C. Rogers
Abstract:
The factorization theorems of quantum chromodynamics (QCD) apply equally well to most simple quantum field theories that require renormalization but where direct calculations are much more straightforward. Working with these simpler theories is convenient for stress-testing the limits of the factorization program and for examining general properties of the parton density functions (pdfs) or other…
▽ More
The factorization theorems of quantum chromodynamics (QCD) apply equally well to most simple quantum field theories that require renormalization but where direct calculations are much more straightforward. Working with these simpler theories is convenient for stress-testing the limits of the factorization program and for examining general properties of the parton density functions (pdfs) or other correlation functions that might be necessary for a factorized description of a process. With this view in mind, we review the steps of factorization in a real scalar Yukawa field theory for both deep inelastic scattering (DIS) and semi-inclusive deep inelastic scattering (SIDIS) cross sections. In the case of SIDIS, we illustrate how to separate the small transverse momentum region, where transverse momentum dependent (TMD) pdfs are needed, from a purely collinear large transverse momentum region, and we examine the influence of subleading power corrections. We also review the steps for formulating TMD factorization in transverse coordinate space, and we study the effect of transforming to the well-known $b_*$-scheme. Within the Yukawa theory, we investigate the consequences of switching to a generalized parton model (GPM) approach, and compare with a fully factorized approach. Our results highlight the need to address similar or analogous issues in QCD.
△ Less
Submitted 1 December, 2022; v1 submitted 1 December, 2022;
originally announced December 2022.
-
Transverse Momentum Dependent Fragmentation Functions from recent BELLE data
Authors:
M. Boglione,
J. O. Gonzalez-Hernandez,
A. Simonelli
Abstract:
A new formalism for the factorization of the cross section for single hadron production in $e^+e^-$ annihilations, differential in $z_h$, $P_T$ and thrust, is applied to the phenomenological analysis of data recently measured by the BELLE Collaboration. Within this scheme the $e^+e^- \to hX$ cross section can be recast in the convolution of a perturbatively calculable coefficient and a universal t…
▽ More
A new formalism for the factorization of the cross section for single hadron production in $e^+e^-$ annihilations, differential in $z_h$, $P_T$ and thrust, is applied to the phenomenological analysis of data recently measured by the BELLE Collaboration. Within this scheme the $e^+e^- \to hX$ cross section can be recast in the convolution of a perturbatively calculable coefficient and a universal transverse momentum dependent fragmentation function. While performing a next-to-leading order calculation of the perturbative part of the process to next-to-leading logarithmic accuracy, we examine and thoroughly discuss the suitability of a number of possible ansatz to model the non-perturbative part of this universal transverse momentum dependent fragmentation function, showing the extent to which present experimental data can actually constrain its shape and functional form in terms of $z_h$, $P_T$ and thrust.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Combining nonperturbative transverse momentum dependence with TMD evolution
Authors:
J. O. Gonzalez-Hernandez,
T. C. Rogers,
N. Sato
Abstract:
Central to understanding the nonpertubative, intrinsic partonic nature of hadron structure are the concepts of transverse momentum dependent (TMD) parton distribution and fragmentation functions. A TMD factorization approach to the phenomenology of semi-inclusive processes that includes evolution, higher orders, and matching to larger transverse momentum, is ultimately necessary for reliably conne…
▽ More
Central to understanding the nonpertubative, intrinsic partonic nature of hadron structure are the concepts of transverse momentum dependent (TMD) parton distribution and fragmentation functions. A TMD factorization approach to the phenomenology of semi-inclusive processes that includes evolution, higher orders, and matching to larger transverse momentum, is ultimately necessary for reliably connecting with phenomenologically extracted nonperturbative structures, especially when widely different scales are involved. In this paper, we will address some of the difficulties that arise when phenomenological techniques that were originally designed for very high energy applications are extended to studies of hadron structures, and we will solidify the connection between standard high energy TMD implementations and the more intuitive, parton model based approaches to phenomenology that emphasize nonperturbative hadron structure. In the process, we will elaborate on differences between forward and backward TMD evolution, which in the context of this paper we call "bottom-up" and "top-down" approaches, and we will explain the advantages of a bottom-up strategy. We will also emphasize and clarify the role of the integral relations that connect TMD and collinear correlation functions. We will show explicitly how they constrain the nonperturbative "$g$-functions" of standard Collins-Soper-Sterman (CSS) implementations of TMD factorization. This paper is especially targeted toward phenomenologists and model builders who are interested in merging specific nonperturbative models and calculations (including lattice QCD) with TMD factorization at large $Q$. Our main result is a recipe for incorporating nonperturbative models into TMD factorization, and for constraining their parameters in a way that matches to perturbative QCD and evolution.
△ Less
Submitted 11 May, 2022;
originally announced May 2022.
-
Accurate Metallicities for Very Metal-Poor Stars from the Ca~II Infrared Triplet
Authors:
Y. Osorio,
D. S. Aguado,
C. Allende-Prieto,
I. Hubeny,
J. I. Gonzalez-Hernandez
Abstract:
The Ca~II H \& K lines are among the few features available to infer the metallicity of extremely metal-poor stars from medium-resolution spectroscopy. Unfortunately, these lines can overlap with absorption produced in the intervening interstellar medium, introducing systematic errors in the derived metallicities. The strength of the Ca~II infrared triplet lines can also be measured at extremely l…
▽ More
The Ca~II H \& K lines are among the few features available to infer the metallicity of extremely metal-poor stars from medium-resolution spectroscopy. Unfortunately, these lines can overlap with absorption produced in the intervening interstellar medium, introducing systematic errors in the derived metallicities. The strength of the Ca~II infrared triplet lines can also be measured at extremely low metallicities, and it is not affected by interstellar absorption, but suffers significant departures from Local Thermodynamical Equilibrium (LTE). We investigate the feasibility of adopting the Ca~II infrared triplet as a metallicity indicator in extremely metal-poor stars using state-of-the art Non-LTE models including the most recent atomic data. We find that the triplet lines exhibit Non-LTE abundance corrections that can exceed 0.5\,dex. When interstellar absorption affecting the Ca~II resonance lines is accounted for using high-resolution observations, the agreement between Non-LTE abundances for the triplet and those for the resonance lines, with only minor departures from LTE, is excellent. Non-LTE effects strengthen the Ca~II IR triplet lines, facilitating measurements at very low metallicities, compared with LTE estimates, down to $\rm [Fe/H]=-6.0$. This result has important implications for the discovery of primitive stars in our Galaxy and others, since instruments are most sensitive at red/near-infrared wavelengths, and tens of millions of spectra covering the Ca~II IR triplet will soon become available from the Gaia, DESI, WEAVE, and PFS missions.
△ Less
Submitted 2 March, 2022;
originally announced March 2022.
-
The peculiar chemical abundance of the transitional millisecond pulsar PSR J1023+0038 -- Li enhancement
Authors:
T. Shahbaz,
J. I. Gonzalez-Hernandez,
R. P. Breton,
M. R. Kennedy,
D. Mata Sanchez,
M. Linares
Abstract:
Using high-resolution optical spectroscopy we determine the chemical abundance of the secondary star in the binary millisecond pulsar PSR J1023+0038. We measure a metallicity of [Fe/H] = 0.48 +/- 0.04 which is higher than the Solar value and in general find that the element abundances are different compared to the secondary stars in X-ray binaries and stars in the solar neighbourhood of similar Fe…
▽ More
Using high-resolution optical spectroscopy we determine the chemical abundance of the secondary star in the binary millisecond pulsar PSR J1023+0038. We measure a metallicity of [Fe/H] = 0.48 +/- 0.04 which is higher than the Solar value and in general find that the element abundances are different compared to the secondary stars in X-ray binaries and stars in the solar neighbourhood of similar Fe content. Our results suggest that the pulsar was formed in a supernova explosion. We find that supernova models, where matter that has been processed in the supernova is captured by the secondary star leading to abundance anomalies, qualitatively agree with the observations. We measure Li abundance of A(Li) = 3.66 +/- 0.20, which is anomalously high compared to the Li abundance of stars with the same effective temperature, irrespective of the age of the system. Furthermore, the Li abundance in PSR J1023+0038 is higher than the Cosmic value and what is observed in young Population I stars and so provides unambiguous evidence for fresh Li production. The most likely explanation is the interaction of high energy gamma-rays or relativistic protons from the pulsar wind or intrabinary shock with the CNO nuclei in the secondary star's atmosphere via spallation which leads to substantial Li enrichment in the secondary star's atmosphere.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Spontaneous anomalous Hall effect arising from an unconventional compensated magnetic phase in a semiconductor
Authors:
R. D. Gonzalez Betancourt,
J. Zubáč,
R. J. Gonzalez-Hernandez,
K. Geishendorf,
Z. Šobáň,
G. Springholz,
K. Olejník,
L. Šmejkal,
J. Sinova,
T. Jungwirth,
S. T. B. Goennenwein,
A. Thomas,
H. Reichlová,
J. Železný,
D. Kriegner
Abstract:
The anomalous Hall effect, commonly observed in metallic magnets, has been established to originate from the time-reversal symmetry breaking by an internal macroscopic magnetization in ferromagnets or by a non-collinear magnetic order. Here we observe a spontaneous anomalous Hall signal in the absence of an external magnetic field in an epitaxial film of MnTe, which is a semiconductor with a colli…
▽ More
The anomalous Hall effect, commonly observed in metallic magnets, has been established to originate from the time-reversal symmetry breaking by an internal macroscopic magnetization in ferromagnets or by a non-collinear magnetic order. Here we observe a spontaneous anomalous Hall signal in the absence of an external magnetic field in an epitaxial film of MnTe, which is a semiconductor with a collinear antiparallel magnetic ordering of Mn moments and a vanishing net magnetization. The anomalous Hall effect arises from an unconventional phase with strong time-reversal symmetry breaking and alternating spin polarization in real-space crystal structure and momentum-space electronic structure. The anisotropic crystal environment of magnetic Mn atoms due to the non-magnetic Te atoms is essential for establishing the unconventional phase and generating the anomalous Hall effect.
△ Less
Submitted 23 January, 2023; v1 submitted 13 December, 2021;
originally announced December 2021.
-
Phenomenological extraction of a universal TMD fragmentation function from single hadron production in $e^+ e^-$ annihilations
Authors:
M. Boglione,
J. O. Gonzalez-Hernandez,
A. Simonelli
Abstract:
Factorizing the cross section for single hadron production in $e^+e^-$ annihilations, differential in $z_h$, $P_T$ and thrust, is a highly non trivial task. We have devised a factorization scheme that allows us to recast the $e^+e^- \to hX$ cross section in the convolution of a perturbatively calculable coefficient and a universal Transverse Momentum Dependent (TMD) Fragmentation Function (FF). Th…
▽ More
Factorizing the cross section for single hadron production in $e^+e^-$ annihilations, differential in $z_h$, $P_T$ and thrust, is a highly non trivial task. We have devised a factorization scheme that allows us to recast the $e^+e^- \to hX$ cross section in the convolution of a perturbatively calculable coefficient and a universal Transverse Momentum Dependent (TMD) Fragmentation Function (FF). The predictions obtained from our NLO-NLL perturbative computation, together with a simple ansatz to model the non-perturbative part of the TMD, are applied to the experimental measurements of the BELLE Collaboration for the phenomenological extraction of this process independent TMD FF.
△ Less
Submitted 10 August, 2021; v1 submitted 9 August, 2021;
originally announced August 2021.
-
Reweighting the quark Sivers function with STAR jet data
Authors:
Carlo Flore,
Maria Elena Boglione,
Umberto D'Alesio,
Josè Osvaldo Gonzalez-Hernandez,
Francesco Murgia,
Alexei Prokudin
Abstract:
The Bayesian reweighting procedure is applied for the first time to a TMD distribution, the quark Sivers function extracted from SIDIS data. By exploiting the recent published single spin asymmetry data for the inclusive jet production in $p^\uparrow p$ collisions from the STAR collaboration at RHIC, we show how such a procedure allows to incorporate the information contained in the new data set,…
▽ More
The Bayesian reweighting procedure is applied for the first time to a TMD distribution, the quark Sivers function extracted from SIDIS data. By exploiting the recent published single spin asymmetry data for the inclusive jet production in $p^\uparrow p$ collisions from the STAR collaboration at RHIC, we show how such a procedure allows to incorporate the information contained in the new data set, without the need of re-fitting, and to explore a much wider $x$ region compared to SIDIS measurements. The reweighting method is also extended to the case of asymmetric errors, and the results show a significant improvement on the knowledge of the quark Sivers function.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Reweighting the Sivers function with jet data from STAR
Authors:
Mariaelena Boglione,
Umberto D'Alesio,
Carlo Flore,
Josè Osvaldo Gonzalez-Hernandez,
Francesco Murgia,
Alexei Prokudin
Abstract:
The reweighting procedure that using Bayesian statistics incorporates the information contained in a new data set, without the need of re-fitting, is applied to the quark Sivers function extracted from Semi-Inclusive Deep Inelastic Scattering (SIDIS) data. We exploit the recently published single spin asymmetry data for the inclusive jet production in polarized $pp$ collisions from the STAR Collab…
▽ More
The reweighting procedure that using Bayesian statistics incorporates the information contained in a new data set, without the need of re-fitting, is applied to the quark Sivers function extracted from Semi-Inclusive Deep Inelastic Scattering (SIDIS) data. We exploit the recently published single spin asymmetry data for the inclusive jet production in polarized $pp$ collisions from the STAR Collaboration at RHIC, which cover a much wider $x$ region compared to SIDIS measurements. The reweighting method is extended to the case of asymmetric errors and the results show a remarkable improvement of the knowledge of the quark Sivers function.
△ Less
Submitted 11 January, 2021;
originally announced January 2021.
-
Pristine IX: CFHT ESPaDOnS Spectroscopic Analysis of 115 Bright Metal-Poor Candidate Stars
Authors:
Kim Venn,
Collin Kielty,
Federico Sestito,
Else Starkenburg,
Nicolas Martin,
David S. Aguado,
Anke Arentsen,
Piercarlo Bonifacio,
Elisabetta Caffau,
Vanessa Hill,
Pascale Jablonka,
Carmela Lardo,
Lyudmilla Mashonkina,
Julio F. Navarro,
Chris Sneden,
Guillaume Thomas,
Kris Youakim,
Jonay I. Gonzalez-Hernandez,
Ruben Sanchez Janssen,
Ray Carlberg,
Khyati Malhan
Abstract:
A chemo-dynamical analysis of 115 metal-poor candidate stars selected from the narrow-band Pristine photometric survey is presented based on CFHT high-resolution ESPaDoNS spectroscopy. We have discover 28 new bright (V < 15) stars with [Fe/H]<-2.5 and 5 with [Fe/H]<-3.0 for success rates of 40% (28/70) and 19% (5/27), respectively. A detailed model atmospheres analysis is carried out for the 28 ne…
▽ More
A chemo-dynamical analysis of 115 metal-poor candidate stars selected from the narrow-band Pristine photometric survey is presented based on CFHT high-resolution ESPaDoNS spectroscopy. We have discover 28 new bright (V < 15) stars with [Fe/H]<-2.5 and 5 with [Fe/H]<-3.0 for success rates of 40% (28/70) and 19% (5/27), respectively. A detailed model atmospheres analysis is carried out for the 28 new metal-poor stars. Stellar parameters were determined from SDSS photometric colours, Gaia DR2 parallaxes, MESA/MIST stellar isochrones, and the initial Pristine survey metallicities, following a Bayesian inference method. Chemical abundances are determined for 10 elements (Na, Mg, Ca, Sc, Ti, Cr, Fe, Ni, Y, Ba). Most stars show chemical abundance patterns that are similar to the normal metal-poor stars in the Galactic halo; however, we also report the discoveries of a new r-process rich star, a new CEMP-s candidate with [Y/Ba]>0, and a metal-poor star with very low [Mg/Fe]. The kinematics and orbits for all of the highly probable metal-poor candidates are determined by combining our precision radial velocities with Gaia DR2 proper motions. Some stars show unusual kinematics for their chemistries, including planar orbits, unbound orbits, and highly elliptical orbits that plunge deeply into the Galactic bulge (Rperi < 0.5 kpc); also, eight stars have orbital energies and actions consistent with the Gaia-Enceladus accretion event. This paper contributes to our understanding of the complex chemo-dynamics of the metal-poor Galaxy, and increases the number of known bright metal-poor stars available for detailed nucleosynthetic studies.
△ Less
Submitted 14 October, 2019;
originally announced October 2019.
-
Map** the Kinematical Regimes of Semi-Inclusive Deep Inelastic Scattering
Authors:
M. Boglione,
A. Dotson,
L. Gamberg,
S. Gordon,
J. O. Gonzalez-Hernandez,
A. Prokudin,
T. C. Rogers,
N. Sato
Abstract:
We construct a language for identifying kinematical regions of transversely differential semi-inclusive deep inelastic scattering cross sections with particular underlying partonic pictures, especially in regions of moderate to low $Q$ where sensitivity to kinematical effects outside the usual very high energy limit becomes non-trivial. The partonic pictures map to power law expansions whose leadi…
▽ More
We construct a language for identifying kinematical regions of transversely differential semi-inclusive deep inelastic scattering cross sections with particular underlying partonic pictures, especially in regions of moderate to low $Q$ where sensitivity to kinematical effects outside the usual very high energy limit becomes non-trivial. The partonic pictures map to power law expansions whose leading contributions ultimately lead to well-known QCD factorization theorems. We propose methods for estimating the consistency of any particular region of overall hadronic kinematics with the kinematics of a given underlying partonic picture. The basic setup of kinematics of semi-inclusive deep inelastic scattering is also reviewed in some detail.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Extraction of Generalized Parton Distribution Observables from Deeply Virtual Electron Proton Scattering Experiments
Authors:
Brandon Kriesten,
Simonetta Liuti,
Liliet Calero-Diaz,
Dustin Keller,
Andrew Meyer,
Gary R. Goldstein,
J. Osvaldo Gonzalez-Hernandez
Abstract:
We provide the general expression of the cross section for exclusive deeply virtual photon electroproduction from a spin 1/2 target using current parameterizations of the off-forward correlation function in a nucleon for different beam and target polarization configurations up to twist three accuracy. All contributions to the cross section including deeply virtual Compton scattering, the Bethe-Hei…
▽ More
We provide the general expression of the cross section for exclusive deeply virtual photon electroproduction from a spin 1/2 target using current parameterizations of the off-forward correlation function in a nucleon for different beam and target polarization configurations up to twist three accuracy. All contributions to the cross section including deeply virtual Compton scattering, the Bethe-Heitler process, and their interference, are described within a helicity amplitude based framework which is also relativistically covariant and readily applicable to both the laboratory frame and in a collider kinematic setting. Our formalism renders a clear physical interpretation of the various components of the cross section by making a connection with the known characteristic structure of the electron scattering coincidence reactions. In particular, we focus on the total angular momentum, $J_z$, and on the orbital angular momentum, $L_z$. On one side, we uncover an avenue to a precise extraction of $J_z$, given by the combination of generalized parton distributions, $H+E$, through a generalization of the Rosenbluth separation method used in elastic electron proton scattering. On the other, we single out for the first time, the twist three angular modulations of the cross section that are sensitive to $L_z$. The proposed generalized Rosenbluth technique adds an important constraint for map** the 3D structure of the nucleon.
△ Less
Submitted 4 March, 2020; v1 submitted 13 March, 2019;
originally announced March 2019.
-
Large Transverse Momentum in Semi-Inclusive Deeply Inelastic Scattering Beyond Lowest Order
Authors:
B. Wang,
J. O. Gonzalez-Hernandez,
T. C. Rogers,
N. Sato
Abstract:
Motivated by recently observed tension between $O\left(α_s^2\right)$ calculations of very large transverse momentum dependence in both semi-inclusive deep inelastic scattering and Drell-Yan scattering, we repeat the details of the calculation through $O\left(α_s^2\right)$ transversely differential cross section. The results confirm earlier calculations, and provide further support to the observati…
▽ More
Motivated by recently observed tension between $O\left(α_s^2\right)$ calculations of very large transverse momentum dependence in both semi-inclusive deep inelastic scattering and Drell-Yan scattering, we repeat the details of the calculation through $O\left(α_s^2\right)$ transversely differential cross section. The results confirm earlier calculations, and provide further support to the observation that tension exists with current parton distribution and fragmentation functions.
△ Less
Submitted 4 March, 2019;
originally announced March 2019.
-
Effect of pre-oxidation treatments on the structural, microstructural, and chemical properties of (Ni,Pt)Al systems
Authors:
J. E. Garcia-Herrera,
D. G. Espinosa-Arbelaez,
L. A. Caceres-Diaz,
G. C. Mondragon-Rodriguez,
H. Ruiz-Luna,
J. Gonzalez-Hernandez,
J. Munoz-Saldana,
J. M. Alvarado-Orozco
Abstract:
The effect of isothermal pre-oxidation treatments on the \b{eta}-(Ni,Pt)Al + René N5 system degradation is here reported. The oxidation treatments were carried out from 900 (mostly θ-Al2O3 growing conditions) to 1200°C (mainly α-Al2O3 growing conditions) for 5 h, under a purified Ar-stream with a fixed pO2= 1 x 10-5 atm. Results are discussed based on the correlation between the structural, micros…
▽ More
The effect of isothermal pre-oxidation treatments on the \b{eta}-(Ni,Pt)Al + René N5 system degradation is here reported. The oxidation treatments were carried out from 900 (mostly θ-Al2O3 growing conditions) to 1200°C (mainly α-Al2O3 growing conditions) for 5 h, under a purified Ar-stream with a fixed pO2= 1 x 10-5 atm. Results are discussed based on the correlation between the structural, microstructural and chemical properties of the \b{eta}-(Ni,Pt)Al BC showing that pre-oxidation parameters have an important effect on the multi-elemental counter diffusion phenomena along BC. For instance, a significant BC+IDZ thickness increase of 55% at 1200 °C was observed with respect to as-received sample just after 5 h of oxidation resulting in a severe BC degradation.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Effect of Graded Bias Voltage on the Microstructure of arc-PVD CrN Films and its Response in Electrochemical & Mechanical Behavior
Authors:
M. L. Cedeño-Venté,
D. G. Espinosa-Arbeláez,
J. Manríquez-Rocha,
G. C. Mondragón-Rodríguez,
A. E. Gómez-Ovalle,
J. González-Hernández,
J. M. Alvarado-Orozco
Abstract:
The effect of graded or constant bias voltages (-40 V, -80 V and -40/60/80 V) on size grain and surface defects of arc PVD deposited CrN films was investigated. Corrosion resistance evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic curves (Tafel) and the mechanical behavior evaluated by means of instrumented nanoindentation and scratch testing was correlated with the…
▽ More
The effect of graded or constant bias voltages (-40 V, -80 V and -40/60/80 V) on size grain and surface defects of arc PVD deposited CrN films was investigated. Corrosion resistance evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic curves (Tafel) and the mechanical behavior evaluated by means of instrumented nanoindentation and scratch testing was correlated with the microstructural changes. It was found that the bias voltage variation affects corrosion behavior due to the presence of defects (i.e. open voids, droplets) which also affects the failure mechanisms and increasing spallation. High bias voltage (-80 V) increases nano-hardness and the elastic modulus due to the dense microstructure of the CrN coating.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Plasma-assisted nitriding of M2 tool steel: An experimental and theoretical approach
Authors:
J. M. Gonzalez-Carmona,
G. C. Mondragon-Rodriguez,
J. E. Galvan-Chaire,
A. E. Gomez-Ovalle,
L. A. Caceres-Diaz,
J. Gonzalez-Hernandez,
J. M. Alvarado-Orozco
Abstract:
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically effective compound (4 to 17.6 um) and diffusion layers (50.8 to 82.4 um) were obtained. Plasma nitriding considerably improved Surface engineering has been recognized a…
▽ More
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically effective compound (4 to 17.6 um) and diffusion layers (50.8 to 82.4 um) were obtained. Plasma nitriding considerably improved Surface engineering has been recognized as a family of technologies used to modify or improve the surface properties of a substrate. Nano-hardness, E-moduli and resistance to scratch of AISI M2 steel. Surface properties enhancement was associated to two harmonious effects at the nano-scale resulted by (a) stable nitride phases formation such as: gamma-Fe4N, epsilon-Fe2,3N, and (b) no brittle nitride networks and no critical decarburization of the steel upon nitriding. Thermodynamic calculations are in agreement with the experimental findings.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Theoretical-Experimental failure analysis of the c-Al0.66Ti0.33N-M2 steel system using nanoindentation instrumented and finite element analysis
Authors:
A. E. Gómez-Ovalle,
M. Torres,
J. M. Alvarado-Orozco,
S. M. A. Jimenez,
D. G. Espinosa-Arbelaez,
J. M. Gonzalez-Carmona,
J. Zárate-Medina,
J. González-Hernández,
G. C. Mondragón-Rodríguez
Abstract:
A theoretical-experimental methodology for failure analysis of the c-Al0.66Ti0.33N / Interface / M2 steel coating system is proposed here. This c-Al0.66Ti0.33N coating was deposited by the arc-PVD technique. For coating modeling the traction-separation law and the extended finite element method-XFEM were applied, the cohesive zones model was used for interface modeling and the Ramberg-Osgood law f…
▽ More
A theoretical-experimental methodology for failure analysis of the c-Al0.66Ti0.33N / Interface / M2 steel coating system is proposed here. This c-Al0.66Ti0.33N coating was deposited by the arc-PVD technique. For coating modeling the traction-separation law and the extended finite element method-XFEM were applied, the cohesive zones model was used for interface modeling and the Ramberg-Osgood law for substrate modeling. Experimental values using the instrumented nanoindentation technique, the scratch test and tensile stress test were obtained and introduced into the model. By means of nanoindentation the elastic modulus of coating, the fracture energy release rate and the nano-hardness. Normal and shear stress values of the interface were obtained with the scratch test, at the adhesive and cohesive critical loads. Vickers indentation was used to generate cracking patterns in the c-Al0.66Ti0.33N / Interface / M2 steel coating system. Radial and lateral cracks were generated and analyzed after transversal FIB cuts of the fracture zones. A finite element analysis was carried out to understand the relationship between the load-displacement curve and mechanical failure of in the system, associating the pop-in with nucleation, crack growth and cracking pattern. This works present a theoretical-experimental methodology for failure analysis of hard coatings (monolithic body) allowing to calculate fracture toughness of the coating material and model cracking patterns caused by contact mechanics.
△ Less
Submitted 13 October, 2018;
originally announced October 2018.
-
Phase stability and elastic properties in the $Al_{1-x-y}Cr_{x}Ti_{y}N$ system from first principles
Authors:
Erik Gutiérrez-Valladares,
Rurick Santos-Fragoso,
Guillermo Vázquez-Tovar,
Andrés Manuel Garay-Tapia,
Diego Germán Espinosa-Arbeláez,
Raymundo Arróyave,
Jesús González-Hernández,
Juan Manuel Alvarado-Orozco
Abstract:
Multicomponent nitrides are a hot research topic in the search of hard coatings. The effect of substitutions on the phase stabilities, magnetic, and elastic properties of $Al_{1-x-y}Cr_{x}Ti_{y}N$ $(0\leq x,y\leq1)$ was studied using first principles calculations based on the density functional theory. These calculations provide the lattice parameter, formation energy, mixing enthalpy and elastic…
▽ More
Multicomponent nitrides are a hot research topic in the search of hard coatings. The effect of substitutions on the phase stabilities, magnetic, and elastic properties of $Al_{1-x-y}Cr_{x}Ti_{y}N$ $(0\leq x,y\leq1)$ was studied using first principles calculations based on the density functional theory. These calculations provide the lattice parameter, formation energy, mixing enthalpy and elastic constants. The calculated values are in good agreement with experiments and compare well with other theoretical results. A magnetic transition from antiferromagnetic to ferromagnetic state occurs at concentrations of B1-TiN higher than 60$\%$. The quaternary zone has a lower aluminum solubility than the constituent ternary systems. The Poisson's ratio, Shear and Young modulus were used as predictors of the hardness, indicating that the higher hardness values are found on the transition line from B1 to B4. The obtained results enable the design of new $Al_{1-x-y}Cr_{x}Ti_{y}N$-based materials for coating applications.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Diamond-Like Carbon Coatings on Plasma Nitrided M2 Steel: effect of deposition parameters on adhesion properties
Authors:
A. Moreno-Barcenas,
J. M Alvarado-Orozco,
J. M. Gonzalez Carmona,
G. C. Mondragon-Rodriguez,
J. Gonzalez-Hernandez,
A. Garcia-Garcia
Abstract:
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and substrate pre-treatment plays an important role in supporting and enforcing the adhesion and service performance of the DLC coatings. In t…
▽ More
Diamond-like carbon (DLC) coatings have excellent mechanical and tribological properties, as well as good wear and corrosion resistance. They are well established in medical, metalworking and automotive applications. However, further improvements are needed and substrate pre-treatment plays an important role in supporting and enforcing the adhesion and service performance of the DLC coatings. In this work, the synergetic effect of low-pressure arc plasma-assisted-nitriding (PAN) treatment of M2 steel and plasma-enhanced chemical vapor deposition (PECVD) on the DLC coatings adhesion was analyzed. Adhesion strength of a duplex DLC + nitriding coating system was compared to the performance of DLC-coatings applied on non-nitrided M2 steel substrates. The nitrided layer was analyzed by optical microscopy, X-ray diffraction, Vickers microhardness and atomic force microscopy. DLC coatings were analyzed using Raman spectroscopy revealing that DLC a-C:H type was obtained. The adhesion properties were analyzed by scratch testing supported by optical microscopy and Scanning Electron Microscope. Results showed an improvement of the DLC adhesion on the plasma nitrided surfaces.
△ Less
Submitted 12 October, 2018;
originally announced October 2018.
-
Effect of thermal treatments in high purity Ar on the oxidation behavior of arc-PVD c-Al0.66Ti0.33N coatings
Authors:
G. C. Mondragon Rodriguez,
Y. Chipatecua-Godoy,
N. Camacho,
D. G. Espinosa-Arbelaez,
J. Gonzalez-Hernandez,
J. M. Alvarado-Orozco
Abstract:
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High temperature tribology in Ar jet and adhesion behavior of the oxidized coating were addressed. The use of Ar protects the coating from the oxidation reactions and allowed to shed light into the details and paths of the nitr…
▽ More
The effect of temperature in high purity Ar (low oxygen partial pressure) on the oxidation and crystal phase evolution of c-Al0.66Ti0.33N arc-PVD coatings was investigated. High temperature tribology in Ar jet and adhesion behavior of the oxidized coating were addressed. The use of Ar protects the coating from the oxidation reactions and allowed to shed light into the details and paths of the nitride oxidation process. The c-Al0.66Ti0.33N nitrides were slightly oxidized in Ar even at high temperature. The surface chemistry evaluation shows very thin Al- and Ti-based oxide layers formation after 700C in Ar. However, the onset formation of the rutile TiO2 oxide was detected only after 900C and was clearly found by low-angle XRD diffraction after 1000C. XPS analysis of the oxidized samples at 800C indicated the formation of extremely thin layers mainly composed of mixed oxides a-Al2O3 g-Al2O3 and r-TiO2. Gradual changes in the chemical composition of the oxidized coatings observed at 900C clearly demonstrate the formation of gradient boundaries between Al-rich and Ti-rich oxy-nitride layers. After 1000C at least four oxides and oxi-nitrides layers and interlayers were found. Additionally, it is suspected that the transition oxide phases such as c-TiO, c-Al0.54Ti2.46O0.28N4.58, alpha-Al2TiO5 and TiOxNy might be precursors leading to the formation of thermodynamically stable rutile and alumina phases. Surface inspection after high temperature tribology in Ar jet showed formation of tensile cracks in the wear tracks and wear processes due to high size particle adhesion-abrasion and low size particle micro-ploughing of hard nitrides, oxi-nitrides and brittle oxide particles. Adhesion tests performed after high temperature tribology in Ar showed critical load decrease related to cohesive and adhesive damages at the contact point of the scratch track.
△ Less
Submitted 25 January, 2019; v1 submitted 11 October, 2018;
originally announced October 2018.
-
Challenges with Large Transverse Momentum in Semi-Inclusive Deeply Inelastic Scattering
Authors:
J. O. Gonzalez-Hernandez,
T. C. Rogers,
N. Sato,
B. Wang
Abstract:
We survey the current phenomenological status of semi-inclusive deep inelastic scattering at moderate hard scales and in the limit of very large transverse momentum. As the transverse momentum becomes comparable to or larger than the overall hard scale, the differential cross sections should be calculable with fixed order pQCD methods, while small transverse momentum (TMD factorization) approximat…
▽ More
We survey the current phenomenological status of semi-inclusive deep inelastic scattering at moderate hard scales and in the limit of very large transverse momentum. As the transverse momentum becomes comparable to or larger than the overall hard scale, the differential cross sections should be calculable with fixed order pQCD methods, while small transverse momentum (TMD factorization) approximations should eventually break down. We find large disagreement between HERMES and COMPASS data and fixed order calculations done with modern parton densities, even in regions of kinematics where such calculations should be expected to be very accurate. Possible interpretations are suggested.
△ Less
Submitted 12 December, 2018; v1 submitted 13 August, 2018;
originally announced August 2018.
-
Field tests for the ESPRESSO data analysis software
Authors:
Guido Cupani,
Valentina D'Odorico,
Stefano Cristiani,
Jonay I. González-Hernández,
Christophe Lovis,
Sérgio Sousa,
Paolo Di Marcantonio,
Denis Mégevand
Abstract:
The data analysis software (DAS) for VLT ESPRESSO is aimed to set a new benchmark in the treatment of spectroscopic data towards the extremely-large-telescope era, providing carefully designed, fully interactive recipes to take care of complex analysis operations (e.g. radial velocity estimation in stellar spectra, interpretation of the absorption features in quasar spectra). A few months away fro…
▽ More
The data analysis software (DAS) for VLT ESPRESSO is aimed to set a new benchmark in the treatment of spectroscopic data towards the extremely-large-telescope era, providing carefully designed, fully interactive recipes to take care of complex analysis operations (e.g. radial velocity estimation in stellar spectra, interpretation of the absorption features in quasar spectra). A few months away from the instrument's first light, the DAS is now mature for science validation, with most algorithms already implemented and operational. In this paper, I will showcase the DAS features which are currently employed on high-resolution HARPS and UVES spectra to assess the scientific reliability of the recipes and their range of application. I will give a glimpse on the science that will be possible when ESPRESSO data become available, with a particular focus on the novel approach that has been adopted to simultaneously fit the emission continuum and the absorption lines in the Lyman-alpha forest of quasar spectra.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Data Analysis for Precision Spectroscopy: the ESPRESSO Case
Authors:
Guido Cupani,
Valentina D'Odorico,
Stefano Cristiani,
Jonay González-Hernández,
Christophe Lovis,
Sérgio Sousa,
Eros Vanzella,
Paolo Di Marcantonio,
Denis Mégevand
Abstract:
ESPRESSO is an extremely stable high-resolution spectrograph which is currently being developed for the ESO VLT. With its groundbreaking characteristics it is aimed to be a "science machine", i.e. a fully-integrated instrument to directly extract science information from the observations. In particular, ESPRESSO will be the first ESO instrument to be equipped with a dedicated tool for the analysis…
▽ More
ESPRESSO is an extremely stable high-resolution spectrograph which is currently being developed for the ESO VLT. With its groundbreaking characteristics it is aimed to be a "science machine", i.e. a fully-integrated instrument to directly extract science information from the observations. In particular, ESPRESSO will be the first ESO instrument to be equipped with a dedicated tool for the analysis of data, the Data Analysis Software (DAS), consisting in a number of recipes to analyze both stellar and quasar spectra. Through the new ESO Reflex GUI, the DAS (which will implement new algorithms to analyze quasar spectra) is aimed to get over the shortcomings of the existing software providing multiple iteration modes and full interactivity with the data.
△ Less
Submitted 13 August, 2018;
originally announced August 2018.
-
Assessing signals of TMD physics in SIDIS azimuthal asymmetries and in the extraction of the Sivers function
Authors:
M. Boglione,
U. D'Alesio,
C. Flore,
J. O. Gonzalez-Hernandez
Abstract:
New data on the Sivers azimuthal asymmetry measured in semi-inclusive deep-inelastic scattering processes have recently been released by the COMPASS Collaboration at CERN. Their increased precision and their particular binning, in terms of $Q^2$ as well as $x$, motivates a new extraction of the Sivers function, within the framework of a simple and transparent parametrization. Signals of TMD effect…
▽ More
New data on the Sivers azimuthal asymmetry measured in semi-inclusive deep-inelastic scattering processes have recently been released by the COMPASS Collaboration at CERN. Their increased precision and their particular binning, in terms of $Q^2$ as well as $x$, motivates a new extraction of the Sivers function, within the framework of a simple and transparent parametrization. Signals of TMD effects visible in the Sivers asymmetries are critically assessed. A thorough study of the uncertainties affecting the extracted Sivers function is presented, including the low-$x$ and large-$x$ regions.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Transverse parton momenta in single inclusive hadron production in ${e^ + }{e^ - }$ annihilation processes
Authors:
M. Boglione,
J. O. Gonzalez-Hernandez,
R. Taghavi
Abstract:
We study the transverse momentum distributions of single inclusive hadron production in ${e^ + }{e^ - }$ annihilation processes. Although the only available experimental data are scarce and quite old, we find that the fundamental features of transverse momentum dependent (TMD) evolution, historically addressed in Drell-Yan processes and, more recently, in Semi-inclusive deep inelastic scattering p…
▽ More
We study the transverse momentum distributions of single inclusive hadron production in ${e^ + }{e^ - }$ annihilation processes. Although the only available experimental data are scarce and quite old, we find that the fundamental features of transverse momentum dependent (TMD) evolution, historically addressed in Drell-Yan processes and, more recently, in Semi-inclusive deep inelastic scattering processes, are visible in ${e^ + }{e^ - }$ annihilations as well. Interesting effects related to its non-perturbative regime can be observed. We test two different parameterizations for the $p_\perp$ dependence of the cross section: the usual Gaussian distribution and a power-law model. We find the latter to be more appropriate in describing this particular set of experimental data, over a relatively large range of $p_\perp$ values. We use this model to map some of the features of the data within the framework of TMD evolution, and discuss the caveats of this and other possible interpretations, related to the one-dimensional nature of the available experimental data.
△ Less
Submitted 28 April, 2017;
originally announced April 2017.
-
Kinematics of Current Region Fragmentation in Semi-Inclusive Deeply Inelastic Scattering
Authors:
M. Boglione,
J. Collins,
L. Gamberg,
J. O. Gonzalez-Hernandez,
T. C. Rogers,
N. Sato
Abstract:
Different kinematical regimes of semi-inclusive deeply inelastic scattering (SIDIS) processes correspond to different underlying partonic pictures, and it is important to understand the transition between them. This is particularly the case when there is sensitivity to intrinsic transverse momentum, in which case kinematical details can become especially important. We address the question of how t…
▽ More
Different kinematical regimes of semi-inclusive deeply inelastic scattering (SIDIS) processes correspond to different underlying partonic pictures, and it is important to understand the transition between them. This is particularly the case when there is sensitivity to intrinsic transverse momentum, in which case kinematical details can become especially important. We address the question of how to identify the current fragmentation region --- the kinematical regime where a factorization picture with fragmentation functions is appropriate. We distinguish this from soft and target fragmentation regimes. Our criteria are based on the kinematic regions used in derivations of factorization theorems. We argue that, when hard scales are of order a few GeVs, there is likely significant overlap between different rapidity regions that are normally understood to be distinct. We thus comment on the need to take this into account with more unified descriptions of SIDIS, which should span all rapidities for the produced hadron. Finally, we propose general criteria for estimating the proximity to the current region at large Q.
△ Less
Submitted 30 January, 2017; v1 submitted 30 November, 2016;
originally announced November 2016.
-
The HADES RV Programme with HARPS-N@TNG II. Data treatment and simulations
Authors:
M. Perger,
A. García-Piquer,
I. Ribas,
J. C. Morales,
L. Affer,
G. Micela,
M. Damasso,
A. Suárez-Mascareño,
J. I. González-Hernández,
R. Rebolo,
E. Herrero,
A. Rosich,
M. Lafarga,
A. Bignamini,
A. Sozzetti,
R. Claudi,
R. Cosentino,
E. Molinari,
J. Maldonado,
A. Maggio,
A. F. Lanza,
E. Poretti,
I. Pagano,
S. Desidera,
R. Gratton
, et al. (8 additional authors not shown)
Abstract:
The distribution of exoplanets around low-mass stars is still not well understood. Such stars, however, present an excellent opportunity of reaching down to the rocky and habitable planet domains. The number of current detections used for statistical purposes is still quite modest and different surveys, using both photometry and precise radial velocities, are searching for planets around M dwarfs.…
▽ More
The distribution of exoplanets around low-mass stars is still not well understood. Such stars, however, present an excellent opportunity of reaching down to the rocky and habitable planet domains. The number of current detections used for statistical purposes is still quite modest and different surveys, using both photometry and precise radial velocities, are searching for planets around M dwarfs. Our HARPS-N red dwarf exoplanet survey is aimed at the detection of new planets around a sample of 78 selected stars, together with the subsequent characterization of their activity properties. Here we investigate the survey performance and strategy. From 2700 observed spectra, we compare the radial velocity determinations of the HARPS-N DRS pipeline and the HARPS-TERRA code, we calculate the mean activity jitter level, we evaluate the planet detection expectations, and we address the general question of how to define the strategy of spectroscopic surveys in order to be most efficient in the detection of planets. We find that the HARPS-TERRA radial velocities show less scatter and we calculate a mean activity jitter of 2.3 m/s for our sample. For a general radial velocity survey with limited observing time, the number of observations per star is key for the detection efficiency. In the case of an early M-type target sample, we conclude that approximately 50 observations per star with exposure times of 900 s and precisions of about 1 m/s maximizes the number of planet detections.
△ Less
Submitted 27 October, 2016;
originally announced October 2016.
-
Data Analysis Software for the ESPRESSO Science Machine
Authors:
Guido Cupani,
Valentina D'Odorico,
Stefano Cristiani,
Jonay González-Hernández,
Christophe Lovis,
Sérgio Sousa,
Eros Vanzella,
Paolo Di Marcantonio,
Denis Mégevand
Abstract:
ESPRESSO is an extremely stable high-resolution spectrograph which is currently being developed for the ESO VLT. With its groundbreaking characteristics it is aimed to be a "science machine", i.e., a fully-integrated instrument to directly extract science information from the observations. In particular, ESPRESSO will be the first ESO instrument to be equipped with a dedicated tool for the analysi…
▽ More
ESPRESSO is an extremely stable high-resolution spectrograph which is currently being developed for the ESO VLT. With its groundbreaking characteristics it is aimed to be a "science machine", i.e., a fully-integrated instrument to directly extract science information from the observations. In particular, ESPRESSO will be the first ESO instrument to be equipped with a dedicated tool for the analysis of data, the Data Analysis Software (DAS), consisting in a number of recipes to analyze both stellar and quasar spectra. Through the new ESO Reflex GUI, the DAS (which will implement new algorithms to analyze quasar spectra) is aimed to get over the shortcomings of the existing software providing multiple iteration modes and full interactivity with the data.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Testing the chemical tagging technique with open clusters
Authors:
S. Blanco-Cuaresma,
C. Soubiran,
U. Heiter,
M. Asplund,
G. Carraro,
M. T. Costado,
S. Feltzing,
J. I. González-Hernández,
F. Jiménez-Esteban,
A. J. Korn,
A. F. Marino,
D. Montes,
I. San Roman,
H. M. Tabernero,
G. Tautvaišienė
Abstract:
Context. Stars are born together from giant molecular clouds and, if we assume that the priors were chemically homogeneous and well-mixed, we expect them to share the same chemical composition. Most of the stellar aggregates are disrupted while orbiting the Galaxy and most of the dynamic information is lost, thus the only possibility of reconstructing the stellar formation history is to analyze th…
▽ More
Context. Stars are born together from giant molecular clouds and, if we assume that the priors were chemically homogeneous and well-mixed, we expect them to share the same chemical composition. Most of the stellar aggregates are disrupted while orbiting the Galaxy and most of the dynamic information is lost, thus the only possibility of reconstructing the stellar formation history is to analyze the chemical abundances that we observe today.
Aims. The chemical tagging technique aims to recover disrupted stellar clusters based merely on their chemical composition. We evaluate the viability of this technique to recover co-natal stars that are no longer gravitationally bound.
Methods. Open clusters are co-natal aggregates that have managed to survive together. We compiled stellar spectra from 31 old and intermediate-age open clusters, homogeneously derived atmospheric parameters, and 17 abundance species, and applied machine learning algorithms to group the stars based on their chemical composition. This approach allows us to evaluate the viability and efficiency of the chemical tagging technique.
Results. We found that stars at different evolutionary stages have distinct chemical patterns that may be due to NLTE effects, atomic diffusion, mixing, and biases. When separating stars into dwarfs and giants, we observed that a few open clusters show distinct chemical signatures while the majority show a high degree of overlap. This limits the recovery of co-natal aggregates by applying the chemical tagging technique. Nevertheless, there is room for improvement if more elements are included and models are improved.
△ Less
Submitted 26 March, 2015; v1 submitted 6 March, 2015;
originally announced March 2015.
-
Gaia FGK Benchmark Stars - Metallicity
Authors:
Paula Jofre,
U. Heiter,
C. Soubiran,
S. Blanco-Cuaresma,
C. C. Worley,
E. Pancino,
M. Bergemann,
T. Cantat-Gaudin,
J. I. Gonzalez-Hernandez,
V. Hill,
C. Lardo,
P. de Laverny,
K. Lind,
L. Magrini,
T. Masseron,
D. Montes,
A. Mucciarelli,
T. Nordlander,
A. Recio-Blanco,
J. Sobeck,
R. Sordo,
S. G. Sousa,
H. Tabernero,
A. Vallenari,
S. Van Eck
Abstract:
To calibrate automatic pipelines that determine atmospheric parameters of stars, one needs a sample of stars -- ``benchmark stars'' -- with well defined parameters to be used as a reference We provide a detailed documentation of the determination of the iron abundance of the 34 FGK-type benchmark stars selected to be the pillars for calibration of the one billion Gaia stars. They cover a wide rang…
▽ More
To calibrate automatic pipelines that determine atmospheric parameters of stars, one needs a sample of stars -- ``benchmark stars'' -- with well defined parameters to be used as a reference We provide a detailed documentation of the determination of the iron abundance of the 34 FGK-type benchmark stars selected to be the pillars for calibration of the one billion Gaia stars. They cover a wide range of temperatures, surface gravities and metallicities. Up to seven different methods were used to analyze an observed spectral library of high resolution and high signal-to-noise ratio. The metallicity was determined assuming a value of effective temperature and surface gravity obtained from fundamental relations, i.e. these parameters were known a priori independently from the spectra. We present a set of metallicity values obtained in a homogeneous way for our sample of Benchmark Stars. In addition to this value, we provide a detailed documentation of the associated uncertainties. Finally, we report for the first time a value of the metallicity of the cool giant psi Phe.
△ Less
Submitted 27 January, 2014; v1 submitted 4 September, 2013;
originally announced September 2013.
-
MARVELS-1: A face-on double-lined binary star masquerading as a resonant planetary system; and consideration of rare false positives in radial velocity planet searches
Authors:
Jason T. Wright,
Arpita Roy,
Suvrath Mahadevan,
Sharon X. Wang,
Eric B. Ford,
Matt Payne,
Brian L. Lee,
Ji Wang,
Justin R. Crepp,
B. Scott Gaudi,
Jason Eastman,
Joshua Pepper,
Jian Ge,
Scott W. Fleming,
Luan Ghezzi,
Jonay I. Gonzalez-Hernandez,
Phillip Cargile,
Keivan G. Stassun,
John Wisniewski,
Leticia Dutra-Ferreira,
Gustavo F. Porto de Mello,
Marcio A. G. Maia,
Luiz Nicolaci da Costa,
Ricardo L. C. Ogando,
Basilio X. Santiago
, et al. (2 additional authors not shown)
Abstract:
We have analyzed new and previously published radial velocity observations of MARVELS-1, known to have an ostensibly substellar companion in a ~6- day orbit. We find significant (~100 m/s) residuals to the best-fit model for the companion, and these residuals are naively consistent with an interior giant planet with a P = 1.965d in a nearly perfect 3:1 period commensuribility (|Pb/Pc - 3| < 10^{-4…
▽ More
We have analyzed new and previously published radial velocity observations of MARVELS-1, known to have an ostensibly substellar companion in a ~6- day orbit. We find significant (~100 m/s) residuals to the best-fit model for the companion, and these residuals are naively consistent with an interior giant planet with a P = 1.965d in a nearly perfect 3:1 period commensuribility (|Pb/Pc - 3| < 10^{-4}). We have performed several tests for the reality of such a companion, including a dynamical analysis, a search for photometric variability, and a hunt for contaminating stellar spectra. We find many reasons to be critical of a planetary interpretation, including the fact that most of the three-body dynamical solutions are unstable. We find no evidence for transits, and no evidence of stellar photometric variability. We have discovered two apparent companions to MARVELS-1 with adaptive optics imaging at Keck; both are M dwarfs, one is likely bound, and the other is likely a foreground object. We explore false-alarm scenarios inspired by various curiosities in the data. Ultimately, a line profile and bisector analysis lead us to conclude that the ~100 m/s residuals are an artifact of spectral contamination from a stellar companion contributing ~15-30% of the optical light in the system. We conclude that origin of this contamination is the previously detected radial velocity companion to MARVELS-1, which is not, as previously reported, a brown dwarf, but in fact a G dwarf in a face-on orbit.
△ Less
Submitted 21 October, 2013; v1 submitted 1 May, 2013;
originally announced May 2013.
-
Interpretation of the Flavor Dependence of Nucleon Form Factors in a Generalized Parton Distribution Model
Authors:
J. Osvaldo Gonzalez-Hernandez,
Simonetta Liuti,
Gary R. Goldstein,
Kunal Kathuria
Abstract:
We give an interpretation of the $u$ and $d$ quarks contributions to the nucleon electromagnetic form factors for values of the four-momentum transfer in the multi-GeV region where flavor separated data have been recently made available. The data show, in particular, a suppression of $d$ quarks with respect to $u$ quarks at large momentum transfer. %and constant ratios of the flavor dependent Paul…
▽ More
We give an interpretation of the $u$ and $d$ quarks contributions to the nucleon electromagnetic form factors for values of the four-momentum transfer in the multi-GeV region where flavor separated data have been recently made available. The data show, in particular, a suppression of $d$ quarks with respect to $u$ quarks at large momentum transfer. %and constant ratios of the flavor dependent Pauli to Dirac form factors ratios. This trend can be explained using a reggeized diquark model calculation of generalized parton distributions, thus providing a correlation between momentum and coordinate spaces, both of which are necessary in order to interpret the partonic substructure of the form factors. We extend our discussion to the second moments of generalized parton distributions which are believed to contribute to partonic angular momentum.
△ Less
Submitted 26 September, 2013; v1 submitted 8 June, 2012;
originally announced June 2012.
-
Chemical Clues on the Formation of Planetary Systems: C/O vs Mg/Si for HARPS GTO Sample
Authors:
Elisa Delgado Mena,
Garik Israelian,
Jonay I. González-Hernández,
Jade C. Bond,
Nuno C. Santos,
Stephane Udry,
Michel Mayor
Abstract:
Theoretical studies suggest that C/O and Mg/Si are the most important elemental ratios in determining the mineralogy of terrestrial planets. The C/O ratio controls the distribution of Si among carbide and oxide species, while Mg/Si gives information about the silicate mineralogy. We present a detailed and uniform study of C, O, Mg and Si abundances for 61 stars with detected planets and 270 stars…
▽ More
Theoretical studies suggest that C/O and Mg/Si are the most important elemental ratios in determining the mineralogy of terrestrial planets. The C/O ratio controls the distribution of Si among carbide and oxide species, while Mg/Si gives information about the silicate mineralogy. We present a detailed and uniform study of C, O, Mg and Si abundances for 61 stars with detected planets and 270 stars without detected planets from the homogeneous high-quality unbiased HARPS GTO sample, together with 39 more planet-host stars from other surveys. We determine these important mineralogical ratios and investigate the nature of the possible terrestrial planets that could have formed in those planetary systems. We find mineralogical ratios quite different from those of the Sun, showing that there is a wide variety of planetary systems which are not similar to Solar System. Many of planetary host stars present a Mg/Si value lower than 1, so their planets will have a high Si content to form species such as MgSiO$_{3}$. This type of composition can have important implications for planetary processes like plate tectonics, atmospheric composition or volcanism.
△ Less
Submitted 1 October, 2010; v1 submitted 27 September, 2010;
originally announced September 2010.
-
Light elements in stars with exoplanets
Authors:
N. C. Santos,
E. Delgado Mena,
G. Israelian,
J. I. González-Hernández,
M. C. Gálvez-Ortiz,
M. Mayor,
S. Udry,
R. Rebolo,
S. Sousa,
S. Randich
Abstract:
It is well known that stars orbited by giant planets have higher abundances of heavy elements when compared with average field dwarfs. A number of studies have also addressed the possibility that light element abundances are different in these stars. In this paper we will review the present status of these studies. The most significant trends will be discussed.
It is well known that stars orbited by giant planets have higher abundances of heavy elements when compared with average field dwarfs. A number of studies have also addressed the possibility that light element abundances are different in these stars. In this paper we will review the present status of these studies. The most significant trends will be discussed.
△ Less
Submitted 18 March, 2010;
originally announced March 2010.
-
Chemical Abundances in the Secondary Star in the Black Hole Binary A0620-00
Authors:
Jonay I. Gonzalez-Hernandez,
R. Rebolo,
G. Israelian,
J. Casares,
A. Maeder,
G. Meynet
Abstract:
Using a high resolution spectrum of the secondary star in the black hole binary A0620-00, we have derived the stellar parameters and veiling caused by the accretion disk in a consistent way. We have used a chi^2 minimization procedure to explore a grid of 800 000 LTE synthetic spectra computed for a plausible range of both stellar and veiling parameters. Adopting the best model parameters found,…
▽ More
Using a high resolution spectrum of the secondary star in the black hole binary A0620-00, we have derived the stellar parameters and veiling caused by the accretion disk in a consistent way. We have used a chi^2 minimization procedure to explore a grid of 800 000 LTE synthetic spectra computed for a plausible range of both stellar and veiling parameters. Adopting the best model parameters found, we have determined atmospheric abundances of Fe, Ca, Ti, Ni and Al. The Fe abundance of the star is [Fe/H]=0.14 +- 0.20. Except for Ca, we found the other elements moderately over-abundant as compared with stars in the solar neighborhood of similar iron content. Taking into account the small orbital separation, the mass transfer rate and the mass of the convection zone of the secondary star, a comparison with element yields in supernova explosion models suggests a possible explosive event with a mass cut comparable to the current mass of the compact object. We have also analyzed the Li abundance, which is unusually high for a star of this spectral type and relatively low mass.
△ Less
Submitted 17 March, 2004;
originally announced March 2004.
-
Oxygen and Magnesium Abundance in the Ultra-Metal-Poor Giants CS22949-037 and CS29498-043: Challenges in Models of Atmospheres
Authors:
G. Israelian,
N. Shchukina,
R. Rebolo,
G. Basri,
J. I. Gonzalez-Hernandez,
T. Ka**o
Abstract:
We report the results of a non-LTE Fe, O and Mg abundance analysis of the carbon-nitrogen-rich ultra-metal-poor giants CS29498--043 and CS22949--037. The abundance of oxygen has been derived from measurements of the oxygen triplet at 7771-5 A in high resolution spectra obtained with KeckI/HIRES and the forbidden line [OI] 6300 A detected in the TNG/SARG spectra of CS29498-043. Detailed non-LTE a…
▽ More
We report the results of a non-LTE Fe, O and Mg abundance analysis of the carbon-nitrogen-rich ultra-metal-poor giants CS29498--043 and CS22949--037. The abundance of oxygen has been derived from measurements of the oxygen triplet at 7771-5 A in high resolution spectra obtained with KeckI/HIRES and the forbidden line [OI] 6300 A detected in the TNG/SARG spectra of CS29498-043. Detailed non-LTE analysis of Fe lines has provided reliable stellar parameters which, however, do not resolve the oxygen abundance conflict as derived from the OI 7771-5 A triplet and the [OI] 6300 A forbidden lines. We obtained the following oxygen abundance: for CS22949-037 [O/Fe] =3.13, 1.95; and for CS29498-043; [O/Fe]=3.02, 2.49, based on the OI 7771-5 A triplet and the [OI] 6300 A forbidden line, respectively. A similar conflict appears to exist between the forbidden resonance line MgI 4571 A and several subordinate lines, such as MgI 5172 and 5183 A. Our analysis demonstrates the failure of standard plane--parallel atmosphere models to describe the physical conditions in the line-forming regions of these ultra-metal-poor giants.
△ Less
Submitted 1 March, 2004;
originally announced March 2004.
