-
Materials research for hiper laser fusion facilities: chamber wall, structural material and final optics
Authors:
J. Alvarez,
A. Rivera,
R. Gonzalez-Arrabal,
D. Garoz,
E. Del Rio,
J. M. Perlado
Abstract:
The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research & Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the d…
▽ More
The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research & Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the different areas of interest. The chamber first wall will have to withstand explosions of at least 100 MJ at a repetition rate of 5-10 Hz. If direct drive targets are used, a dry wall chamber operated in vacuum is preferable. In this situation the major threat for the wall stems from ions. For reasonably low chamber radius (5-10 m) new materials based on W and C are being investigated, e.g., engineered surfaces and nanostructured materials. Structural materials will be subject to high fluxes of neutrons leading to deleterious effects, such as, swelling. Low activation advanced steels as well as new nanostructured materials are being investigated. The final optics lenses will not survive the extreme ion irradiation pulses originated in the explosions. Therefore, mitigation strategies are being investigated. In addition, efforts are being carried out in understanding optimized conditions to minimize the loss of optical properties by neutron and gamma irradiation.
△ Less
Submitted 11 February, 2024;
originally announced May 2024.
-
Thermo-mechanical behaviour of a tungsten first wall in HiPER laser fusion scenarios
Authors:
D Garoz,
A. R. Páramo,
A Rivera,
J. M. Perlado,
R González-Arrabal
Abstract:
The behaviour of a tungsten first wall is studied under the irradiation conditions predicted for the different operation scenarios of the European Laser fusion project HiPER, which is based on direct drive targets and an evacuated dry wall chamber. The scenarios correspond to different stages in the development of a nuclear fusion reactor, from proof of principle (bunch mode facility) to economic…
▽ More
The behaviour of a tungsten first wall is studied under the irradiation conditions predicted for the different operation scenarios of the European Laser fusion project HiPER, which is based on direct drive targets and an evacuated dry wall chamber. The scenarios correspond to different stages in the development of a nuclear fusion reactor, from proof of principle (bunch mode facility) to economic feasibility (pre-commercial power plant). This work constitutes a quantitative study to evaluate the first wall performance under realistic irradiation conditions in the different scenarios. We calculated the radiation fluxes assuming the geometrical configurations reported so far for HiPER. Then, we calculated the irradiation-induced first wall temperature evolution and the thermo-mechanical response of the material. The results indicate that the first wall will plastically deform up to a few microns underneath the surface. Continuous operation in power plant leads to fatigue failure with crack generation and growth. Finally, the crack propagation and the minimum W thickness required to fulfil the first wall protection role is studied. The response of tungsten as first wall material as well as its main limitations will be discussed for the HiPER scenarios.
△ Less
Submitted 11 February, 2024;
originally announced May 2024.
-
Plasma-wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials
Authors:
J. Alvarez Ruiz,
A. Rivera,
K. Mima,
D. Garoz,
R. Gonzalez-Arrabal,
N. Gordillo,
J. Fuchs,
K. Tanaka,
I. Fernandez,
F. Briones,
J. Perlado
Abstract:
Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m$^{-2}$ and implant more than 10$^{18}$ particles m$^{-2}$ in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the…
▽ More
Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m$^{-2}$ and implant more than 10$^{18}$ particles m$^{-2}$ in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the expected threats: heating, fatigue, cracking, formation of defects, retention of light species, swelling and erosion. Current and novel radiation resistant materials for the first wall need to be validated under realistic conditions. However, at present there is a lack of facilities which can reproduce such ion environments.
This contribution proposes the use of ultra-intense lasers and high-intense pulsed ion beams (HIPIB) to recreate the plasma conditions in LIF reactors. By target normal sheath acceleration, ultra-intense lasers can generate very short and energetic ion pulses with a spectral distribution similar to that of the inertial fusion ion bursts, suitable to validate fusion materials and to investigate the barely known propagation of those bursts through background plasmas/gases present in the reactor chamber. HIPIB technologies, initially developed for inertial fusion driver systems, provide huge intensity pulses which meet the irradiation conditions expected in the first wall of LIF chambers and thus can be used for the validation of materials too.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Silica final lens performance in laser fusion facilities: HiPER and LIFE
Authors:
David Garoz,
R. González-Arrabal,
R. Juárez,
J. Álvarez,
J. Sanz,
J. M. Perlado,
A. Rivera
Abstract:
Nowadays, the projects LIFE (Laser Inertial Fusion Energy) in USA and HiPER (High Power Laser Energy Research) in Europe are the most advanced ones to demonstrate laser fusion energy viability. One of the main points of concern to properly achieve ignition is the performance of the final optics (lenses) under the severe irradiation conditions that take place in fusion facilities. In this paper, we…
▽ More
Nowadays, the projects LIFE (Laser Inertial Fusion Energy) in USA and HiPER (High Power Laser Energy Research) in Europe are the most advanced ones to demonstrate laser fusion energy viability. One of the main points of concern to properly achieve ignition is the performance of the final optics (lenses) under the severe irradiation conditions that take place in fusion facilities. In this paper, we calculate the radiation fluxes and doses as well as the radiation-induced temperature enhancement and colour centre formation in final lenses assuming realistic geometrical configurations for HiPER and LIFE. On these bases, the mechanical stresses generated by the established temperature gradients are evaluated showing that from a mechanical point of view lenses only fulfill specifications if ions resulting from the imploding target are mitigated. The absorption coefficient of the lenses is calculated during reactor startup and steady-state operation. The obtained results evidence the necessity of new solutions to tackle ignition problems during the startup process for HiPER. Finally, we evaluated the effect of temperature gradients on focal length changes and lens surface deformations. In summary, we discuss the capabilities and weak points of silica lenses and propose alternatives to overcome predictable problems.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
High throughput optimization of hard and tough TiN/Ni nanocomposite coatings by reactive magnetron sputter deposition
Authors:
Ignacio Lopez-Cabanas,
Javier LLorca,
Raquel Gonzalez-Arrabal,
Efstathios I. Meletis,
Jon M. Molina-Aldareguia
Abstract:
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition of TiN/Ni coatings with the Ni content ranging from around 0 to 20 at.%. by reactive magnetron sputtering with a well-defined composition gradient, so that almos…
▽ More
A combinatorial thin-film synthesis approach combined with a high throughput analysis methodology was successfully applied to synthesize TiN/Ni coatings with optimum mechanical properties. The synthesis approach consists of the deposition of TiN/Ni coatings with the Ni content ranging from around 0 to 20 at.%. by reactive magnetron sputtering with a well-defined composition gradient, so that almost all possible compositions are produced in one single coating under identical conditions, removing uncertainties from processing conditions. The analysis methodology continuously screened the microstructure, residual stresses, hardness and fracture toughness of TiN/Ni coatings. The results show that a nanocomposite microstructure of equiaxed nanograins of crystalline δ-TiN embedded in a Ni rich amorphous phase is formed in the composition window between 8 and 12 Ni at.%. This microstructure offers a superior combination of hardness and toughness and a simultaneous reduction of residual stresses with respect to TiN coatings grown in the same conditions. Higher Ni contents are however detrimental because they compromise the integrity of the coatings.
△ Less
Submitted 20 April, 2021;
originally announced April 2021.
-
High temperature mechanical properties and microstructure of hard TaSiN coatings
Authors:
M. A. Monclús,
L. Yang,
I. López-Cabañas,
M. Castillo-Rodríguez,
A. Zaman,
J. Wang,
E. I. Meletis,
R. González-Arrabal,
J. LLorca,
J. M. Molina-Aldareguía
Abstract:
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the micropillar splitting method. The influence of the nitrogen concentration on the evolving phases and microstructure of the TaSiN coatings, before and after the high t…
▽ More
Room and high temperature mechanical properties of reactive magnetron sputtered TaSiN coatings were measured using nanoindentation (between 25C and 500C). Fracture toughness was also evaluated at a similar temperature range using the micropillar splitting method. The influence of the nitrogen concentration on the evolving phases and microstructure of the TaSiN coatings, before and after the high temperature testing, were examined by X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. XRD spectra showed broad peaks with hexagonal $γ$-Ta2N as the main phase, with the cubic $δ$-TaN phase emerging for higher N contents. Phase composition remained unchanged before and after the 500C tests. However, after the high temperature tests, TEM analysis showed the presence of an oxide surface layer, with a thickness that decreased (from 42 to 15 nm) with N content, due to residual oxygen diffusion, which replaces nitrogen to form amorphous SiOx. Beneath the oxide-rich surface layer, coatings exhibited a stable nanocrystalline columnar microstructure. Hardness and fracture toughness increased with N content, initially due to the formation of an amorphous Si-N tissue at grain boundaries, and for even higher N contents, due to the appearance of the hard cubic $δ$-TaN phase. Hardness at 500C decreased only by 15%, while fracture toughness followed the opposite trend, due to increased plasticity with temperature. The optimum composition turned out to be Ta55Si10N35, which retained a hardness of 30 GPa at 500C, being also the toughest. These observations make this system very interesting for high temperature applications.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Room temperature ferromagnetic-like behavior in Mn-implanted and post-annealed InAs layers deposited by Molecular Beam Epitaxy
Authors:
R. Gonzalez-Arrabal,
Y. Gonzalez,
L. Gonzalez,
M. Garcia-Hernandez,
F. Munnik,
M. S. Martin-Gonzalez
Abstract:
We report on the magnetic and structural properties of Ar and Mn implanted InAs epitaxial films grown on GaAs (100) by Molecular Beam Epitaxy (MBE) and the effect of Rapid Thermal Annealing (RTA) for 30 seconds at 750C. Channeling Particle Induced X- ray Emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are subsbtitutional in the In-site of the InAs lattice, like…
▽ More
We report on the magnetic and structural properties of Ar and Mn implanted InAs epitaxial films grown on GaAs (100) by Molecular Beam Epitaxy (MBE) and the effect of Rapid Thermal Annealing (RTA) for 30 seconds at 750C. Channeling Particle Induced X- ray Emission (PIXE) experiments reveal that after Mn implantation almost all Mn atoms are subsbtitutional in the In-site of the InAs lattice, like in a diluted magnetic semiconductor (DMS). All of these samples show diamagnetic behavior. But, after RTA treatment the Mn-InAs films exhibit room-temperature magnetism. According to PIXE measurements the Mn atoms are no longer substitutional. When the same set of experiments were performed with As as implantation ion all of the layers present diamagnetism without exception. This indicates that the appearance of room-temperature ferromagnetic-like behavior in the Mn-InAs-RTA layer is not related to lattice disorder produce during implantation, but to a Mn reaction produced after a short thermal treatment. X-ray diffraction patterns (XRD) and Rutherford Back Scattering (RBS) measurements evidence the segregation of an oxygen deficient-MnO2 phase (nominally MnO1.94) in the Mn-InAs-RTA epitaxial layers which might be on the origin of room temperature ferromagnetic-like response observed.
△ Less
Submitted 14 April, 2009;
originally announced April 2009.