-
Guided mode evolution and ionization injection in meter-scale multi-GeV laser wakefield accelerators
Authors:
J. E. Shrock,
E. Rockafellow,
B. Miao,
M. Le,
R. C. Hollinger,
S. Wang,
A. J. Gonsalves,
A. Picksley,
J. J. Rocca,
H. M. Milchberg
Abstract:
We show that laser wakefield electron accelerators in meter-scale, low density hydrodynamic plasma waveguides operate in a new nonlinear propagation regime where sustained beating of lowest order modes of the ponderomotively modified channel plays a significant role, whether or not the injected pulse is linearly matched to the guide. For a continuously doped gas jet, this mode beating effect leads…
▽ More
We show that laser wakefield electron accelerators in meter-scale, low density hydrodynamic plasma waveguides operate in a new nonlinear propagation regime where sustained beating of lowest order modes of the ponderomotively modified channel plays a significant role, whether or not the injected pulse is linearly matched to the guide. For a continuously doped gas jet, this mode beating effect leads to ionization injection and a striated multi-GeV energy spectrum of multiple quasi-monoenergetic peaks; the same process in a locally doped jet produces single multi-GeV peaks with <10% energy spread. A 3-stage model of drive laser pulse evolution and ionization injection characterizes the beating effect and explains our experimental results.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Programmable quantum emitter formation in silicon
Authors:
K. Jhuria,
V. Ivanov,
D. Polley,
W. Liu,
A. Persaud,
Y. Zhiyenbayev,
W. Redjem,
W. Qarony,
P. Parajuli,
Qing Ji,
A. J. Gonsalves,
J. Bokor,
L. Z. Tan,
B. Kante,
T. Schenkel
Abstract:
Silicon-based quantum emitters are candidates for large-scale qubit integration due to their single-photon emission properties and potential for spin-photon interfaces with long spin coherence times. Here, we demonstrate local writing and erasing of selected light-emitting defects using fs laser pulses in combination with hydrogen-based defect activation and passivation. By selecting forming gas (…
▽ More
Silicon-based quantum emitters are candidates for large-scale qubit integration due to their single-photon emission properties and potential for spin-photon interfaces with long spin coherence times. Here, we demonstrate local writing and erasing of selected light-emitting defects using fs laser pulses in combination with hydrogen-based defect activation and passivation. By selecting forming gas (N2/H2) during thermal annealing of carbon-implanted silicon, we form Ci centers while passivating the more common G-centers. The Ci center is a telecom S-band emitter with very promising spin properties that consists of a single interstitial carbon atom in the silicon lattice. Density functional theory calculations show that the Ci center brightness is enhanced by several orders of magnitude in the presence of hydrogen. Fs-laser pulses locally affect the passivation or activation of quantum emitters with hydrogen and enable programmable quantum emitter formation in a qubit-by-design paradigm.
△ Less
Submitted 11 July, 2023;
originally announced July 2023.
-
Control Systems and Data Management for High-Power Laser Facilities
Authors:
Scott Feister,
Kevin Cassou,
Stephen Dann,
Andreas Döpp,
Philippe Gauron,
Anthony J. Gonsalves,
Archis Joglekar,
Victoria Marshall,
Olivier Neveu,
Hans-Peter Schlenvoigt,
Matthew J. V. Streeter,
Charlotte A. J. Palmer
Abstract:
The next generation of high-power lasers enables repetition of experiments at orders of magnitude higher frequency than was possible using the prior generation. Facilities requiring human intervention between laser repetitions need to adapt in order to keep pace with the new laser technology. A distributed networked control system can enable laboratory-wide automation and feedback control loops. T…
▽ More
The next generation of high-power lasers enables repetition of experiments at orders of magnitude higher frequency than was possible using the prior generation. Facilities requiring human intervention between laser repetitions need to adapt in order to keep pace with the new laser technology. A distributed networked control system can enable laboratory-wide automation and feedback control loops. These higher-repetition-rate experiments will create enormous quantities of data. A consistent approach to managing data can increase data accessibility, reduce repetitive data-software development, and mitigate poorly organized metadata. An opportunity arises to share knowledge of improvements to control and data infrastructure currently being undertaken. We compare platforms and approaches to state-of-the-art control systems and data management at high-power laser facilities, and we illustrate these topics with case studies from our community.
△ Less
Submitted 2 June, 2023;
originally announced June 2023.
-
Strong-Field QED Experiments using the BELLA PW Laser Dual Beamlines
Authors:
M. Turner,
S. S. Bulanov,
C. Benedetti,
A. J. Gonsalves,
W. P. Leemans,
K. Nakamura,
J. van Tilborg,
C. B. Schroeder,
C. G. R. Geddes,
E. Esarey
Abstract:
The Petawatt (PW) laser facility of the Berkeley Lab Laser Accelerator (BELLA) Center has recently commissioned its second laser pulse transport line. This new beamline can be operated in parallel with the first beamline and enables strong-field quantum electrodynamics (SF-QED) experiments at BELLA. In this paper, we present an overview of the upgraded BELLA PW facility with a SF-QED experimental…
▽ More
The Petawatt (PW) laser facility of the Berkeley Lab Laser Accelerator (BELLA) Center has recently commissioned its second laser pulse transport line. This new beamline can be operated in parallel with the first beamline and enables strong-field quantum electrodynamics (SF-QED) experiments at BELLA. In this paper, we present an overview of the upgraded BELLA PW facility with a SF-QED experimental layout in which intense laser pulses collide with GeV-class laser-wakefield-accelerated electron beams. We present simulation results showing that experiments will allow the study of laser-particle interactions from the classical to the SF-QED regime with a nonlinear quantum parameter of up to $χ\sim$2. In addition, we show that experiments will enable the study and production of GeV-class, mrad-divergence positron beams via the Breit-Wheeler process.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Online Charge Measurement for Petawatt Laser-Driven Ion Acceleration
Authors:
Laura D. Geulig,
Lieselotte Obst-Huebl,
Kei Nakamura,
Jianhui Bin,
Qing Ji,
Sven Steinke,
Antoine Snijders,
Jian-Hua Mao,
Eleanor Blakely,
Anthony J. Gonsalves,
Stepan S. Bulanov,
Jeroen van Tilborg,
Carl B. Schroeder,
Cameron G. R. Geddes,
Eric Esarey,
Markus Roth,
Thomas Schenkel
Abstract:
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge…
▽ More
Laser-driven ion beams have gained considerable attention for their potential use in multidisciplinary research and technology. Pre-clinical studies into their radiobiological effectiveness have established the prospect of using laser-driven ion beams for radiotherapy. In particular, research into the beneficial effects of ultra-high instantaneous dose rates is enabled by the high ion bunch charge and uniquely short bunch lengths present for laser-driven ion beams. Such studies require reliable, online dosimetry methods to monitor the bunch charge for every laser shot to ensure that the prescribed dose is accurately applied to the biological sample. In this paper we present the first successful use of an Integrating Current Transformer (ICT) for laser-driven ion accelerators. This is a non-invasive diagnostic to measure the charge of the accelerated ion bunch. It enables online dose measurements in radiobiological experiments and facilitates ion beam tuning, in particular, optimization of the laser ion source and alignment of the proton transport beamline. We present the ICT implementation and the correlation with other diagnostics such as radiochromic films, a Thomson parabola spectrometer and a scintillator.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Defect engineering of silicon with ion pulses from laser acceleration
Authors:
Walid Redjem,
Ariel J. Amsellem,
Frances I. Allen,
Gabriele Benndorf,
Jianhui Bin,
Stepan Bulanov,
Eric Esarey,
Leonard C. Feldman,
Javier Ferrer Fernandez,
Javier Garcia Lopez,
Laura Geulig,
Cameron R. Geddes,
Hussein Hijazi,
Qing Ji,
Vsevolod Ivanov,
Boubacar Kante,
Anthony Gonsalves,
Jan Meijer,
Kei Nakamura,
Arun Persaud,
Ian Pong,
Lieselotte Obst-Huebl,
Peter A. Seidl,
Jacopo Simoni,
Carl Schroeder
, et al. (5 additional authors not shown)
Abstract:
Defect engineering is foundational to classical electronic device development and for emerging quantum devices. Here, we report on defect engineering of silicon single crystals with ion pulses from a laser accelerator with ion flux levels up to 10^22 ions/cm^2/s. Low energy ions from plasma expansion of the laser-foil target are implanted near the surface and then diffuse into silicon samples that…
▽ More
Defect engineering is foundational to classical electronic device development and for emerging quantum devices. Here, we report on defect engineering of silicon single crystals with ion pulses from a laser accelerator with ion flux levels up to 10^22 ions/cm^2/s. Low energy ions from plasma expansion of the laser-foil target are implanted near the surface and then diffuse into silicon samples that were locally pre-heated by high energy ions. We observe low energy ion fluences of ~10^16 cm^-2, about four orders of magnitude higher than the fluence of high energy (MeV) ions. In the areas of highest energy deposition, silicon crystals exfoliate from single ion pulses. Color centers, predominantly W and G-centers, form directly in response to ion pulses without a subsequent annealing step. We find that the linewidth of G-centers increase in areas with high ion flux much more than the linewidth of W-centers, consistent with density functional theory calculations of their electronic structure. Laser ion acceleration generates aligned pulses of high and low energy ions that expand the parameter range for defect engineering and do** of semiconductors with tunable balances of ion flux, damage rates and local heating.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Whitepaper submitted to Snowmass21: Advanced accelerator linear collider demonstration facility at intermediate energy
Authors:
C. Benedetti,
S. S. Bulanov,
E. Esarey,
C. G. R. Geddes A. J. Gonsalves,
P. M. Jacobs,
S. Knapen,
B. Nachman,
K. Nakamura,
S. Pagan Griso,
C. B. Schroeder,
D. Terzani,
J. van Tilborg,
M. Turner,
W. -M. Yao,
R. Bernstein,
V. Shiltsev,
S. J. Gessner,
M. J. Hogan,
T. Nelson,
C. **g,
I. Low,
X. Lu,
R. Yoshida,
C. Lee,
P. Meade
, et al. (8 additional authors not shown)
Abstract:
It is widely accepted that the next lepton collider beyond a Higgs factory would require center-of-mass energy of the order of up to 15 TeV. Since, given reasonable space and cost restrictions, conventional accelerator technology reaches its limits near this energy, high-gradient advanced acceleration concepts are attractive. Advanced and novel accelerators (ANAs) are leading candidates due to the…
▽ More
It is widely accepted that the next lepton collider beyond a Higgs factory would require center-of-mass energy of the order of up to 15 TeV. Since, given reasonable space and cost restrictions, conventional accelerator technology reaches its limits near this energy, high-gradient advanced acceleration concepts are attractive. Advanced and novel accelerators (ANAs) are leading candidates due to their ability to produce acceleration gradients on the order of 1--100~GV/m, leading to compact acceleration structures. Over the last 10-15 years significant progress has been achieved in accelerating electron beams by ANAs. For example, the demonstration of several-GeV electron beams from laser-powered capillary discharge waveguides, as well as the proof-of-principle coupling of two accelerating structures powered by different laser pulses, has increased interest in ANAs as a viable technology to be considered for a compact, TeV-class, lepton linear collider.
However, intermediate facilities are required to test the technology and demonstrate key subsystems. A 20-100 GeV center-of-mass energy ANA-based lepton collider can be a possible candidate for an intermediate facility. Apart from being a test beam facility for accelerator and detector studies, this collider will provide opportunities to study muon and proton beam acceleration, investigate charged particle interactions with extreme electromagnetic fields (relevant for beam delivery system designs and to study the physics at the interaction point), as well as precision Quantum Chromodynamics and Beyond the Standard Model physics measurements. Possible applications of this collider include the studies of $γγ$ and $e$-ion collider designs.
△ Less
Submitted 15 April, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Linear colliders based on laser-plasma accelerators
Authors:
C. Benedetti,
S. S. Bulanov,
E. Esarey,
C. G. R. Geddes,
A. J. Gonsalves,
A. Huebl,
R. Lehe,
K. Nakamura,
C. B. Schroeder,
D. Terzani,
J. van Tilborg,
M. Turner,
J. -L. Vay,
T. Zhou,
F. Albert,
J. Bromage,
E. M. Campbell,
D. H. Froula,
J. P. Palastro,
J. Zuegel,
D. Bruhwiler,
N. M. Cook,
B. Cros,
M. C. Downer,
M. Fuchs
, et al. (18 additional authors not shown)
Abstract:
White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators
White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators
△ Less
Submitted 4 July, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
A Survey of Spatio-Temporal Couplings throughout High-Power Ultrashort Lasers
Authors:
Antoine Jeandet,
Spencer W. Jolly,
Antonin Borot,
Benoît Bussière,
Paul Dumont,
Julien Gautier,
Olivier Gobert,
Jean-Philippe Goddet,
Anthony Gonsalves,
Wim P. Leemans,
Rodrigo Lopez-Martens,
Gabriel Mennerat,
Kei Nakamura,
Marie Ouillé,
Gustave Pariente,
Moana Pittman,
Thomas Püschel,
Fabrice Sanson,
François Sylla,
Cédric Thaury,
Karl Zeil,
Fabien Quéré
Abstract:
The investigation of spatio-temporal couplings (STCs) of broadband light beams is becoming a key topic for the optimization as well as applications of ultrashort laser systems. This calls for accurate measurements of STCs. Yet, it is only recently that such complete spatio-temporal or spatio-spectral characterization has become possible, and it has so far mostly been implemented at the output of t…
▽ More
The investigation of spatio-temporal couplings (STCs) of broadband light beams is becoming a key topic for the optimization as well as applications of ultrashort laser systems. This calls for accurate measurements of STCs. Yet, it is only recently that such complete spatio-temporal or spatio-spectral characterization has become possible, and it has so far mostly been implemented at the output of the laser systems, where experiments take place. In this survey, we present for the first time STC measurements at different stages of a collection of high-power ultrashort laser systems, all based on the chirped-pulse amplification (CPA) technique, but with very different output characteristics. This measurement campaign reveals spatio-temporal effects with various sources, and motivates the expanded use of STC characterization throughout CPA laser chains, as well as in a wider range of types of ultrafast laser systems. In this way knowledge will be gained not only about potential defects, but also about the fundamental dynamics and operating regimes of advanced ultrashort laser systems.
△ Less
Submitted 26 September, 2021;
originally announced September 2021.
-
Radial Density Profile and Stability of Capillary Discharge Plasma Waveguides of Lengths up to 40 Centimeters
Authors:
M. Turner,
A. J. Gonsalves,
S. S. Bulvanov,
C. Benedetti,
N. A. Bobrova,
V. A. Gasilov,
P. V. Sasorov,
G. Korn,
K. Nakamura,
J. van Tilborg,
C. G. Geddes,
C. B. Schroeder,
E. Esarey
Abstract:
We measured the parameter reproducibility and radial electron density profile of capillary discharge waveguides with diameters of 650 um to 2 mm and lengths of 9 to 40 cm. To our knowledge, 40 cm is the longest discharge capillary plasma waveguide to date. This length is important for >= 10 GeV electron energy gain in a single laser driven plasma wakefield acceleration (LPA) stage. Evaluation of w…
▽ More
We measured the parameter reproducibility and radial electron density profile of capillary discharge waveguides with diameters of 650 um to 2 mm and lengths of 9 to 40 cm. To our knowledge, 40 cm is the longest discharge capillary plasma waveguide to date. This length is important for >= 10 GeV electron energy gain in a single laser driven plasma wakefield acceleration (LPA) stage. Evaluation of waveguide parameter variations showed that their focusing strength was stable and reproducible to <0.2% and their average on-axis plasma electron density to <1%. These variations explain only a small fraction of LPA electron bunch variations observed in experiments to date. Measurements of laser pulse centroid oscillations revealed that the radial channel profile rises faster than parabolic and are in excellent agreement with magneto-hydro-dynamic simulation results. We show that the effects of non-parabolic contributions on Gaussian pulse propagation were negligible when the pulse was approximately matched to the channel. However, they affected pulse propagation for a non-matched configuration in which the waveguide was used as a plasma telescope to change the focused laser pulse spot size.
△ Less
Submitted 14 January, 2021; v1 submitted 10 December, 2020;
originally announced December 2020.
-
Understanding the fate of corona virus transmission using a simple model
Authors:
Proma Mondal,
Timothy A. Gonsalves,
Aniruddha Chakraborty
Abstract:
We propose a simple model for understanding the kinetics of corona virus transmission. Our model assume spreading of corona virus can happen from one to another only, if someone without enough protection comes close contact to a person carrying the corona virus. Therefore this virus spreads on a large scale within a short time through chains of such events. Using our model we provide an estimation…
▽ More
We propose a simple model for understanding the kinetics of corona virus transmission. Our model assume spreading of corona virus can happen from one to another only, if someone without enough protection comes close contact to a person carrying the corona virus. Therefore this virus spreads on a large scale within a short time through chains of such events. Using our model we provide an estimation of the number of people affected by this virus within reasonable duration of time. We choose values of different parameters of our model by non-linear least square fit of the real time data and we predict fate of this corona virus transmission using our model.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Spatio-temporal structure of a Petawatt femtosecond laser beam
Authors:
Antoine Jeandet,
Antonin Borot,
Kei Nakamura,
Spencer W. Jolly,
Anthony J. Gonsalves,
Csaba Tóth,
Hann-Shin Mao,
Wim P. Leemans,
Fabien Quéré
Abstract:
The development of optical metrology suited to ultrafast lasers has played a key role in the progress of these light sources in the last few decades. Measurement techniques providing the complete $E$-field of ultrashort laser beams in both time and space are now being developed. Yet, they had so far not been applied to the most powerful ultrashort lasers, which reach the PetaWatt range by pushing…
▽ More
The development of optical metrology suited to ultrafast lasers has played a key role in the progress of these light sources in the last few decades. Measurement techniques providing the complete $E$-field of ultrashort laser beams in both time and space are now being developed. Yet, they had so far not been applied to the most powerful ultrashort lasers, which reach the PetaWatt range by pushing the Chirped Pulse Amplification scheme to its present technical limits. This situation left doubts on their actual performance, and in particular on the peak intensity they can reach at focus. In this article we present the first complete spatio-temporal characterization of a PetaWatt femtosecond laser operating at full intensity, the BELLA laser, using two recently-developed independent measurement techniques. Our results demonstrate that, with adequate optimization, the CPA technique is still suitable at these extreme scales, i.e., it is not inherently limited by spatio-temporal couplings. We also show how these measurements provide unprecedented insight into the physics and operation regime of such laser systems.
△ Less
Submitted 8 March, 2019;
originally announced March 2019.
-
On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas
Authors:
G. A. Bagdasarov,
N. A. Bobrova,
A. S. Boldarev,
O. G. Olkhovskaya,
P. V. Sasorov,
V. A. Gasilov,
S. K. Barber,
S. S. Bulanov,
A. J. Gonsalves,
C. B. Schroeder,
J. van Tilborg,
E. Esarey,
W. P. Leemans,
T. Levato,
D. Margarone,
G. Korn,
M. Kando,
S. V. Bulanov
Abstract:
A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissip…
▽ More
A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. Large aspect ratio rectangular capillaries might be used to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.
△ Less
Submitted 7 December, 2017; v1 submitted 20 October, 2017;
originally announced October 2017.
-
Plasma Equilibrium inside Various Cross-Section Capillary Discharges
Authors:
Gennadiy Bagdasarov,
Pavel Sasorov,
Alexey Boldarev,
Olga Olkhovskaya,
Vladimir Gasilov,
Anthony J. Gonsalves,
Samuel Barber,
Stepan Bulanov,
Carl B. Schroeder,
Jeroen van Tilborg,
Eric Esarey,
Wim P. Leemans,
Tadzio Levato,
Daniele Margarone,
Georg Korn,
Sergei V. Bulanov
Abstract:
Plasma properties inside a hydrogen-filled capillary discharge waveguide were modeled with dissipative magnetohydrodynamic simulations to enable analysis of capillaries of circular and square cross-sections implying that square capillaries can be used to guide circularly-symmetric laser beams. When the quasistationary stage of the discharge is reached, the plasma and temperature in the vicinity of…
▽ More
Plasma properties inside a hydrogen-filled capillary discharge waveguide were modeled with dissipative magnetohydrodynamic simulations to enable analysis of capillaries of circular and square cross-sections implying that square capillaries can be used to guide circularly-symmetric laser beams. When the quasistationary stage of the discharge is reached, the plasma and temperature in the vicinity of the capillary axis has almost the same profile for both the circular and square capillaries. The effect of cross-section on the electron beam focusing properties were studied using the simulation-derived magnetic field map. Particle tracking simulations showed only slight effects on the electron beam symmetry in the horizontal and diagonal directions for square capillary.
△ Less
Submitted 29 March, 2017; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Laser beam coupling with capillary discharge plasma for laser wakefield acceleration applications
Authors:
Gennadiy Bagdasarov,
Pavel Sasorov,
Vladimir Gasilov,
Alexey Boldarev,
Olga Olkhovskaya,
Carlo Benedetti,
Stepan Bulanov,
Anthony Joseph Gonsalves,
Hann-Shin Mao,
Carl B. Schroeder,
Jeroen van Tilborg,
Eric Esarey,
Wim P. Leemans,
Tadzio Levato,
Daniele Margarone,
Georg Korn
Abstract:
One of the most robust methods, demonstrated up to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. These channels, i.e., plasma columns with a minimum density along the laser pulse propagation axis, may optically guide short laser pulses, thereby increasing the acceleration length, leading to a more efficient…
▽ More
One of the most robust methods, demonstrated up to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. These channels, i.e., plasma columns with a minimum density along the laser pulse propagation axis, may optically guide short laser pulses, thereby increasing the acceleration length, leading to a more efficient electron acceleration. Although the spatial structure of the installation is simple in principle, there may be some important effects caused by the open ends of the capillary, by the supplying channels etc., which require a detailed 3D modeling of the processes taking place in order to get a detailed understanding and improve the operation. However, the discharge plasma, being one of the most crucial components of the laser-plasma accelerator, is not simulated with the accuracy and resolution required to advance this promising technology. In the present work, such simulations are performed using the code MARPLE. First, the process of the capillary filling with a cold hydrogen before the discharge is fired, through the side supply channels is simulated. The main goal of this simulation is to get a spatial distribution of the filling gas in the region near the open ends of the capillary. A realistic geometry is used for this and the next stage simulations, including the insulators, the supplying channels as well as the electrodes. Second, the simulation of the capillary discharge is performed with the goal to obtain a time-dependent spatial distribution of the electron density near the open ends of the capillary as well as inside the capillary. Finally, to evaluate effectiveness of the beam coupling with the channeling plasma wave guide and electron acceleration, modeling of laser-plasma interaction was performed with the code INF&RNO
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
