-
In-plane thermal diffusivity determination using beam-offset frequency-domain thermoreflectance with a one-dimensional optical heat source
Authors:
Kai Xu,
Jiali Guo,
Grazia Raciti,
Alejandro R. Goni,
M. Isabel Alonso,
Xavier Borrise,
Ilaria Zardo,
Mariano Campoy-Quiles,
Juan Sebastian Reparaz
Abstract:
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments,…
▽ More
We present an innovative contactless method suitable to study in-plane thermal transport based on beam-offset frequency-domain thermoreflectance using a one-dimensional heat source with uniform power distribution. Using a one-dimensional heat source provides a number of advantages as compared to point-like heat sources, as typically used in time- and frequency-domain thermoreflectance experiments, just to name a few: (i) it leads to a slower spatial decay of the temperature field in the direction perpendicular to the line-shaped heat source, allowing to probe the temperature field at larger distances from the heater, hence, enhancing the sensitivity to in-plane thermal transport; (ii) the frequency range of interest is typically < 100 kHz. This rather low frequency range is convenient regarding the cost of the required excitation laser system but, most importantly, it allows the study of materials without the presence of a metallic transducer with almost no influence of the finite optical penetration depth of the pump and probe beams on the thermal phase lag, which arises from the large thermal penetration depth imposed by the used frequency range. We also show that for the case of a harmonic thermal excitation source, the phase lag between the thermal excitation and thermal response of the sample exhibits a linear dependence with their spatial offset, where the slope is proportional to the inverse of the thermal diffusivity of the material. We demonstrate the applicability of this method to the cases of: (i) suspended thin films of Si and PDPP4T, (ii) Bi bulk samples, and (iii) Si, glass, and highly-oriented pyrollitic graphite (HOPG) bulk samples with a thin metallic transducer. Finally, we also show that it is possible to study in-plane heat transport on substrates with rather low thermal diffusivity, e.g., glass, even using a metallic transducer.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Using Pressure to Unravel the Structure-Dynamic-Disorder Relationship in Metal Halide Perovskites
Authors:
Kai Xu,
Luis Pérez-Fidalgo,
Bethan L. Charles,
Mark T. Weller,
M. Isabel Alonso,
Alejandro R. Goñi
Abstract:
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of…
▽ More
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr$_3$ but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Efficient infrared sunlight absorbers based on gold-covered, inverted silicon pyramid arrays
Authors:
**hui Hu,
Luis A. Pérez,
Juan Luis Garcia-Pomar,
Agustín Mihi,
Miquel Garriga,
M. Isabel Alonso,
Alejandro R. Goñi
Abstract:
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption st…
▽ More
The transparency of silicon in the infrared region enables the design of nano/microstructures for implementation in devices to harvest the infrared (IR) part of the solar spectrum. Herein we report a strategy that uses arrays of inverted silicon pyramids covered with a thin gold film, which exhibit substantial light absorption in the infrared spectral range (below the gap of Si). The absorption stems from the resonant excitation at infrared wavelengths of surface-plasmon polaritons at the metal/dielectric interface mainly by tuning size and separation of the inverted pyramids. The array-parameters optimization proceeded by iteration of the calculation and measurement of the infrared response using finite difference time-domain simulations and Fourier-transform IR spectroscopy, respectively. We show two fabrication routes for this kind of metal/silicon metamaterials either by photolithography or scalable nanoimprint techniques for a seamless integration in optoelectronic fabrication processes.
△ Less
Submitted 29 September, 2021;
originally announced September 2021.
-
Anisotropic Thermoreflectance Thermometry: A contactless frequency-domain approach to study anisotropic thermal transport
Authors:
L. A. Perez,
K. Xu,
M. R. Wagner,
B. Dorling,
A. Perevedentsev,
A. R. Goni,
M. Campoy-Quiles,
M. I. Alonso,
J. S. Reparaz
Abstract:
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determ…
▽ More
We developed a novel contactless frequency-domain approach to study thermal transport, which is particularly convenient when thermally anisotropic materials are considered. The method is based on a similar line-shaped heater geometry as used in the 3-omega method, however, kee** all the technical advantages offered by non-contact methodologies. The present method is especially suitable to determine all the elements of the thermal conductivity tensor, which is experimentally achieved by simply rotating the sample with respect to the line-shaped optical heater. We provide the mathematical solution of the heat equation for the cases of anisotropic substrates, multilayers, as well as thin films. This methodology allows an accurate determination of the thermal conductivity, and does not require complex modeling or intensive computational efforts to process the experimental data, i.e., the thermal conductivity is obtained through a simple linear fit ("slope method"), in a similar fashion as in the 3-omega method. We demonstrate the potential of this approach by studying isotropic and anisotropic materials in a wide range of thermal conductivities. In particular, we have studied the following inorganic and organic systems: (i) glass, Si, and Ge substrates (isotropic), (ii) $β$-Ga$_2$O$_3$, and a Kapton substrate (anisotropic) and , (iii) a 285 nm SiO$_2$/Si thin film. The accuracy in the determination of the thermal conductivity is estimated at $\approx$ 5\%, whereas the best temperature resolution is $Δ$T $\approx$ 3 mK.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
Towards chemically neutral carbon cleaning processes: Plasma cleaning of Ni, Rh, and Al reflective optical coatings and thin Al filters for Free Electron Lasers and synchrotron beamline applications
Authors:
H. Moreno Fernández,
M. Zangrando,
G. Sauthier,
A. R. Goñi,
V. Carlino,
E. Pellegrin
Abstract:
The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are standard materials used as reflective coatings for synchrotron mirrors. Conversely, Aluminum is one of the most commonly used materials…
▽ More
The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are standard materials used as reflective coatings for synchrotron mirrors. Conversely, Aluminum is one of the most commonly used materials for extreme ultraviolet (EUV) and soft X-ray filters. However, both of these types of optics are subject to carbon contamination, being increasingly problematic for the operation of the high-performance free electron laser (FEL) and synchrotron beamlines. For this reason, an inductively coupled plasma (ICP) source has been used in conjunction with N2/O2/H2 and N2/H2 feedstock gas plasmas. Results from the chemical surface analysis of the above materials before and after plasma treatment using X-ray photoelectron spectroscopy (XPS) are reported. We conclude that a favorable combination of an N2/H2 plasma feedstock gas mixture leads to the best chemical surface preservation of Ni, Rh, and Al while removing the carbon contaminations. However, this feedstock gas mixture does not remove C contaminations as rapidly as, e.g., a N2/O2/H2 plasma which induces the surface formation of NiO and NiOOH in Ni and RhOOH in Rh foils. As an applied case, we demonstrate the successful carbon removal from ultrathin Al filters previously used at the FERMI FEL1 using a N2/H2 plasma.
△ Less
Submitted 5 March, 2018;
originally announced March 2018.
-
Dynamic disorder, phonon lifetimes, and the assignment of modes to the vibrational spectra of methylammonium lead halide perovskites
Authors:
Aurélien M. A. Leguy,
Alejandro R. Goñi,
Jarvist M. Frost,
Jonathan Skelton,
Federico Brivio,
Xabier Rodríguez-Martínez,
Oliver J. Weber,
Anuradha Pallipurath,
M. Isabel Alonso,
Mariano Campoy-Quiles,
Mark T. Weller,
Jenny Nelson,
Aron Walsh,
Piers R. F. Barnes
Abstract:
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm…
▽ More
We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in sha** the vibrational spectra of the different compounds. Calculations show that these dynamics effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity. We show that optical rather than acoustic phonon scattering is likely to prevail at room temperature in these materials.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
RF plasma cleaning of optical surfaces: A study of cleaning rates on different carbon allotropes as a function of RF powers and distances
Authors:
M. González Cuxart,
J. Reyes-Herrera,
I. Šics,
A. R. Goñi,
H. Moreno Fernandez,
V. Carlino,
E. Pellegrin
Abstract:
An extended study on an advanced method for the cleaning of carbon contaminations on large optical surfaces using a remote inductively coupled low pressure RF plasma source (GV10x downstream asher) is reported in this work. Technical as well as scientific features of this scaled up cleaning process are analyzed, such as the cleaning efficiency for different carbon allotropes (amorphous and diamond…
▽ More
An extended study on an advanced method for the cleaning of carbon contaminations on large optical surfaces using a remote inductively coupled low pressure RF plasma source (GV10x downstream asher) is reported in this work. Technical as well as scientific features of this scaled up cleaning process are analyzed, such as the cleaning efficiency for different carbon allotropes (amorphous and diamond-like carbon) as a function of feedstock gas composition, RF power (ranging from 30 to 300W), and source-object distances (415 to 840 mm). The underlying physical phenomena for these functional dependences are discussed.
△ Less
Submitted 16 June, 2015; v1 submitted 13 June, 2015;
originally announced June 2015.
-
Lattice dynamics and vibrational spectra of the orthorhombic, tetragonal and cubic phases of methylammonium lead iodide
Authors:
Federico Brivio,
Jarvist M. Frost,
Jonathan M. Skelton,
Adam J. Jackson,
Oliver J. Weber,
Mark T. Weller,
Alejandro R. Goni,
Aurelien M. A. Leguy,
Piers R. F. Barnes,
Aron Walsh
Abstract:
The hybrid halide perovskite CH3NH3PbI3 exhibits a complex structural behaviour, with successive transitions between orthorhombic, tetragonal and cubic polymorphs at ca. 165 K and 327 K. Herein we report first-principles lattice dynamics (phonon spectrum) for each phase of CH3NH3PbI3. The equilibrium structures compare well to solutions of temperature-dependent powder neutron diffraction. By follo…
▽ More
The hybrid halide perovskite CH3NH3PbI3 exhibits a complex structural behaviour, with successive transitions between orthorhombic, tetragonal and cubic polymorphs at ca. 165 K and 327 K. Herein we report first-principles lattice dynamics (phonon spectrum) for each phase of CH3NH3PbI3. The equilibrium structures compare well to solutions of temperature-dependent powder neutron diffraction. By following the normal modes we calculate infrared and Raman intensities of the vibrations, and compare them to the measurement of a single crystal where the Raman laser is controlled to avoid degradation of the sample. Despite a clear separation in energy between low frequency modes associated with the inorganic PbI3 network and high-frequency modes of the organic CH3NH3+ cation, significant coupling between them is found, which emphasises the interplay between molecular orientation and the corner-sharing octahedral networks in the structural transformations. Soft modes are found at the boundary of the Brillouin zone of the cubic phase, consistent with displacive instabilities and anharmonicity involving tilting of the PbI6 octahedra around room temperature.
△ Less
Submitted 23 September, 2015; v1 submitted 28 April, 2015;
originally announced April 2015.
-
Optical and mechanical properties of nanofibrillated cellulose: towards a robust platform for next-generation green technologies
Authors:
Claudia D. Simao,
Juan S. Reparaz,
Markus. R. Wagner,
Bartlomiej Graczykowski,
Martin Kreuzer,
Yasser B. Ruiz-Blanco,
Yamila Garcia,
Jani-Markus Malho,
Alejandro R. Goni,
Jouni Ahopelto,
Clivia M. Sotomayor Torres
Abstract:
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in Nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. The results obtained show the precise determination of significant properties as elastic properties and…
▽ More
Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in Nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
Evidence of breakdown of the spin symmetry in diluted 2D electron gases
Authors:
P. Giudici,
A. R. Goñi,
P. G. Bolcatto,
C. R. Proetto,
K. Eberl,
M. Hauser,
C. Thomsen
Abstract:
Recent claims of an experimental demonstration of spontaneous spin polarisation in dilute electron gases \cite{young99} revived long standing theoretical discussions \cite{ceper99,bloch}. In two dimensions, the stabilisation of a ferromagnetic fluid might be hindered by the occurrence of the metal-insulator transition at low densities \cite{abra79}. To circumvent localisation in the two-dimensio…
▽ More
Recent claims of an experimental demonstration of spontaneous spin polarisation in dilute electron gases \cite{young99} revived long standing theoretical discussions \cite{ceper99,bloch}. In two dimensions, the stabilisation of a ferromagnetic fluid might be hindered by the occurrence of the metal-insulator transition at low densities \cite{abra79}. To circumvent localisation in the two-dimensional electron gas (2DEG) we investigated the low populated second electron subband, where the disorder potential is mainly screened by the high density of the first subband. This letter reports on the breakdown of the spin symmetry in a 2DEG, revealed by the abrupt enhancement of the exchange and correlation terms of the Coulomb interaction, as determined from the energies of the collective charge and spin excitations. Inelastic light scattering experiments and calculations within the time-dependent local spin-density approximation give strong evidence for the existence of a ferromagnetic ground state in the diluted regime.
△ Less
Submitted 28 March, 2006;
originally announced March 2006.
-
Evidence of spontaneous spin polarization in the two-dimensional electron gas
Authors:
A. R. Goñi,
P. Giudici,
F. A. Reboredo,
C. R. Proetto,
C. Thomsen,
K. Eberl,
M. Hauser
Abstract:
Density-functional calculations using an exact exchange potential for a two-dimensional electron gas (2DEG) formed in a GaAs single quantum well predict the existence of a spin-polarized phase, when an excited subband becomes slightly populated. Direct experimental evidence is obtained from low temperature and low excitation-power photoluminescence (PL) spectra which display the sudden appearanc…
▽ More
Density-functional calculations using an exact exchange potential for a two-dimensional electron gas (2DEG) formed in a GaAs single quantum well predict the existence of a spin-polarized phase, when an excited subband becomes slightly populated. Direct experimental evidence is obtained from low temperature and low excitation-power photoluminescence (PL) spectra which display the sudden appearance of a sharp emission peak below the energy of the optical transition from the first excited electron subband upon its occupation. The behavior of this PL feature in magnetic fields applied in-plane as well as perpendicular to the 2DEG indicate the formation of spin-polarized domains in the excited subband with in-plane magnetization. For it speaks also the strong enhancement of exchange-vertex corrections observed in inelastic light scattering spectra by spin-density excitations of a slightly occupied first-excited subband.
△ Less
Submitted 6 April, 2004;
originally announced April 2004.
-
Exchange instability of the two-dimensional electron gas in semiconductor quantum wells
Authors:
A. R. Goñi,
U. Haboeck,
C. Thomsen,
K. Eberl,
F. A. Reboredo,
C. R. Proetto,
F. Guinea
Abstract:
A two-dimensional (2D) electron gas formed in a modulation-doped GaAs/AlGaAs single quantum well undergoes a first-order transition when the first excited subband is occupied with electrons, as the Fermi level is tuned into resonance with the excited subband by applying a dc voltage. Direct evidence for this effect is obtained from low-temperature photoluminescence spectra which display the sudd…
▽ More
A two-dimensional (2D) electron gas formed in a modulation-doped GaAs/AlGaAs single quantum well undergoes a first-order transition when the first excited subband is occupied with electrons, as the Fermi level is tuned into resonance with the excited subband by applying a dc voltage. Direct evidence for this effect is obtained from low-temperature photoluminescence spectra which display the sudden renormalization of the intersubband energy $E_{01}$ upon the abrupt occupation of the first excited subband. Calculations within density-functional theory, which treat the 2D exchange potential {\it exactly}, show that this thermodynamical instability of the electron system is mainly driven by {\it intersubband} terms of the exchange Coulomb interaction. From temperature-dependent measurements the existence of a critical point at $T_c = 35\pm 5$ K is inferred.
△ Less
Submitted 22 June, 2001;
originally announced June 2001.
-
Enhanced vortex dam** by eddy currents in superconductor-semiconduc tor hybrids
Authors:
M. Danckwerts A. R. Goni,
C. Thomsen,
K. Eberl,
A. G. Rojo
Abstract:
An enhancement of vortex-motion dam** in thin Pb/In superconducting films is obtained through coupling to an adjacent two-dimensional electron gas formed in a modulation-doped GaAs/AlGaAs heterostructure. This effect is observed by monitoring the power dissipation at the superconductor in the vortex state while increasing the density of the electron gas using a gate voltage. Quantitative agree…
▽ More
An enhancement of vortex-motion dam** in thin Pb/In superconducting films is obtained through coupling to an adjacent two-dimensional electron gas formed in a modulation-doped GaAs/AlGaAs heterostructure. This effect is observed by monitoring the power dissipation at the superconductor in the vortex state while increasing the density of the electron gas using a gate voltage. Quantitative agreement is found with calculations based on a viscous model of vortex dam** which considers generation of eddy currents in the electron gas by moving flux lines. In the regime of filamentary and channel vortex flow, eddy-current dam** leads to striking dissipation breakdown due to stop** of entire vortex channels.
△ Less
Submitted 10 January, 2000;
originally announced January 2000.