Showing 1–50 of 277 results for author: Gomez, E

Three robust temperature-drift compensation strategies for a MEMS gravimeter

Authors: Victor M. Valenzuela, Daniel Teran, Alejandro Sandoval, Eduardo Gomez, John A. Franco-Villafañe, Jesus J. Alcantar-Peña, Juan Ponce-Hernandez

Abstract: Gravimeters fabricated with MEMS suffer from temperature-dependent drifts in their long-term stability. We analyze the thermal contributions to the signal, and we propose three mechanisms to mitigate their effects. The first one uses materials that fulfill the condition $α_E=-2 α$, where the thermal expansion is canceled by the temperature variation of the Young's modulus. The second one uses the… ▽ More Gravimeters fabricated with MEMS suffer from temperature-dependent drifts in their long-term stability. We analyze the thermal contributions to the signal, and we propose three mechanisms to mitigate their effects. The first one uses materials that fulfill the condition $α_E=-2 α$, where the thermal expansion is canceled by the temperature variation of the Young's modulus. The second one uses the thermal expansion to introduce a compression that compensates the variation in the force of the spring. In the third one, the expansion compensates the displacement of the proof mass in the sensor, rather than the force. The three mechanisms are robust since they only depend on the temperature of the sensor itself. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Journal ref: J. Appl. Phys. 133, 234501 (2023)

Self-induced spin pum** and inverse spin Hall effect in single FePt thin films

Authors: J. L. Ampuero, A. Anadón, H. Damas, J. Ghanbaja, S. Petit-Watelot, J. -C. Rojas-Sánchez, D. Velázquez Rodriguez, J. E. Gómez, A. Butera, L. Avilés-Félix

Abstract: In this study, we investigate the spin-charge current conversion characteristics of chemically disordered ferromagnetic single FePt thin films by spin-pum** ferromagnetic resonance experiments performed on both a resonance cavity and on patterned devices. We clearly observe a self-induced signal in a single FePt layer. The sign of a single FePt spin pum** voltage signal is consistent with a ty… ▽ More In this study, we investigate the spin-charge current conversion characteristics of chemically disordered ferromagnetic single FePt thin films by spin-pum** ferromagnetic resonance experiments performed on both a resonance cavity and on patterned devices. We clearly observe a self-induced signal in a single FePt layer. The sign of a single FePt spin pum** voltage signal is consistent with a typical bilayer with a positive spin Hall angle layer such as that of Pt on top of a ferromagnet (FM), substrate//FM/Pt. Structural analysis shows a strong composition gradient due to natural oxidation at both FePt interfaces, with the Si substrate and with the air. The FePt-thickness dependence of the self-induced charge current produced allowed us to obtain $λ_ \text{FePt}=(1.5\pm 0.1)$ nm and self-induced $θ_ \text{self-FePt}=0.047 \pm 0.003$, with efficiency for reciprocal effects applications $θ_ \text{self-FePt} \times λ_ \text{FePt} = 0.071$ nm which is comparable to that of Pt, $θ_ \text{SH-Pt} \times λ_ \text{Pt} = 0.2$ nm. Moreover, by studying bilayer systems such as Si//FePt/Pt and Si//Pt//FePt we independently could extract the individual contributions of the external inverse spin Hall effect of Pt and the self-induced inverse spin Hall effect of FePt. Notably, this method gives consistent values of charge currents produced due to only self-induced inverse spin Hall effect in FePt layers. These results advance our understanding of spin-to-charge interconversion mechanisms in composite thin films and pave the way for the development of next-generation spintronics devices based on self-torque. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

The Muon Anomalous Magnetic Moment in the Excited Fermion Paradigm

Authors: Muhammad Rehman, Haji Muhammad, Orlando Panella, Mario E. Gomez

Abstract: Extensions of the Standard Model featuring excited fermions present an interesting framework that motivates the search for exotic particles at the LHC. Additionally, these extensions offer potential explanations for the muon's anomalous magnetic moment and other precision observables, shedding light on the energy scale and key parameters of the new theory. Our analysis focuses on the one-loop radi… ▽ More Extensions of the Standard Model featuring excited fermions present an interesting framework that motivates the search for exotic particles at the LHC. Additionally, these extensions offer potential explanations for the muon's anomalous magnetic moment and other precision observables, shedding light on the energy scale and key parameters of the new theory. Our analysis focuses on the one-loop radiative correction originating from excited lepton doublet and triplet states using the effective Lagrangian approach. The bounds derived from the $(g-2)_μ$ anomaly can be complemented with the ones arising from other observables like the electroweak precision observable $Δρ$ and the signals from direct LHC searches to constraint the effective theory. Our results suggest that the $(g-2)_μ$ anomaly can be addressed within a very narrow region of the effective theory scale. Consequently, this imposes indirect constraints on the parameter space of excited fermions. △ Less

Submitted 18 May, 2024; originally announced May 2024.

An upgraded 0.4-meter telescope fleet for Las Cumbres Observatory's Educational and Science Programs

Authors: Daniel-Rolf Harbeck, Brook Taylor, Annie Kirby, Mark Bowman, Steve Foale, Kal Kadlec, Curtis McCully, Matthew Daily, Jon DeVera, Dave Douglass, Mark Willis, Ian Baker, Nikolaus Volgenau, Patrick Conway, Brian Haworth, Jesus Estrada, Edward Gomez, Sandy Seale, Alice Hopkinson, Fernando Rios, Prerana Kotapali, Lisa Storrie-Lombardi, Wayne Rosing

Abstract: Las Cumbres Observatory (LCOGT) operates a global network of robotic 0.4, 1.0, and 2.0-meter telescopes to facilitate scientific research and education in time-domain astronomy. LCOGT's flagship educational program, Global Sky Partners (GSP), awards up to 1500 hours per year of telescope time to individuals and organizations that run their own, fully supported, educational programs. The GSP has a… ▽ More Las Cumbres Observatory (LCOGT) operates a global network of robotic 0.4, 1.0, and 2.0-meter telescopes to facilitate scientific research and education in time-domain astronomy. LCOGT's flagship educational program, Global Sky Partners (GSP), awards up to 1500 hours per year of telescope time to individuals and organizations that run their own, fully supported, educational programs. The GSP has a presence in 40 countries and 45% of the Partners target under-served, under-represented, and develo** world audiences. The degradation and obsolescence of the original 0.4-meter telescope network prompted LCOGT to update the fleet of 10 telescopes to a new system consisting of predominantly off-the-shelf products. New PlaneWave DeltaRho 350 telescopes with Gemini Focuser/Rotators, LCOGT filter wheels, and QHY600 CMOS cameras, complement the original, custom-built mount. The deployment of all ten telescopes was completed in March 2024. We describe the design and performance of this new system and its components. We comment on modifications made to the QHY600 cameras, as well as on the treatment of random telegraph noise of its CMOS detectors within our data processing system BANZAI. The new telescope network supports the GSP program as well as multiple key science projects, including follow-up observations for the TESS satellite mission. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Comments: submitted to SPIE Astronomical Telescopes + Instrumentation proceedings 13096-146

Statistical inference for a stochastic generalized logistic differential equation

Authors: Fernando Baltazar-Larios, Francisco Delgado-Vences, Saul Diaz-Infante, Eduardo Lince Gomez

Abstract: This research aims to estimate three parameters in a stochastic generalized logistic differential equation. We assume the intrinsic growth rate and shape parameters are constant but unknown. To estimate these two parameters, we use the maximum likelihood method and establish that the estimators for these two parameters are strongly consistent. We estimate the diffusion parameter by using the quadr… ▽ More This research aims to estimate three parameters in a stochastic generalized logistic differential equation. We assume the intrinsic growth rate and shape parameters are constant but unknown. To estimate these two parameters, we use the maximum likelihood method and establish that the estimators for these two parameters are strongly consistent. We estimate the diffusion parameter by using the quadratic variation processes. To test our results, we evaluate two data scenarios, complete and incomplete, with fixed values assigned to the three parameters. In the incomplete data scenario, we apply an Expectation Maximization algorithm. △ Less

Submitted 6 May, 2024; originally announced May 2024.

Comments: 22 pages, 3 figures

MSC Class: 60H10; 60H35; 62F10

Search for Neutrino Emission from GRB 221009A using the KM3NeT ARCA and ORCA detectors

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardačová, B. Baret, A. Bariego-Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (251 additional authors not shown)

Abstract: Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino even… ▽ More Gamma-ray bursts are promising candidate sources of high-energy astrophysical neutrinos. The recent GRB 221009A event, identified as the brightest gamma-ray burst ever detected, provides a unique opportunity to investigate hadronic emissions involving neutrinos. The KM3NeT undersea neutrino detectors participated in the worldwide follow-up effort triggered by the event, searching for neutrino events. In this letter, we summarize subsequent searches, in a wide energy range from MeV up to a few PeVs. No neutrino events are found in any of the searches performed. Upper limits on the neutrino emission associated with GRB 221009A are computed. △ Less

Submitted 30 April, 2024; v1 submitted 8 April, 2024; originally announced April 2024.

Comments: 11 pages, 2 PDF figures. Submitted to JCAP

AMC-backed Twin Arrow Antenna for Wearable Electronic Travel Aid System at 24 GHz

Authors: Alicia Flórez Berdasco, María Elena de Cos Gómez, Jaime Laviada, Fernando Las-Heras

Abstract: An ultra-compact wearable antenna, for electronic travel aid (ETA) applications, is presented. An AMC-backed twin arrow antenna, operative in the 24.05-24.25 GHz frequency band, has been designed for imaging systems supporting ETA. Artificial Magnetic Conductor (AMC) is combined with the antenna with the aim of reducing the backward radiation to the wearing person while improving its radiation pro… ▽ More An ultra-compact wearable antenna, for electronic travel aid (ETA) applications, is presented. An AMC-backed twin arrow antenna, operative in the 24.05-24.25 GHz frequency band, has been designed for imaging systems supporting ETA. Artificial Magnetic Conductor (AMC) is combined with the antenna with the aim of reducing the backward radiation to the wearing person while improving its radiation properties and bandwidth, all this without increasing the initial area of the antenna. Prototypes of the AMC-antenna have been fabricated and measured. In order to test its performance for the application, imaging have been conducted by means of synthetic aperture radar (SAR) techniques by placing the antenna in the arm of a user to take advantage of natural body movement. Electromagnetic images have been obtained and the target has been identified, demonstrating the suitability of the AMC-antenna for the ETA system. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Muon g-2 and lepton flavor violation in supersymmetric GUTs

Authors: Mario E. Gomez, Smaragda Lola, Qaisar Shafi, Cem Salih Un

Abstract: We present a class of supersymmetric (SUSY) GUT models that can explain the apparent discrepancy between the SM predictions and experimental values of muon g-2 while providing testable signals for lepton flavor violation in charged lepton decays. Moreover, these models predict LSP neutralino abundance that is compatible with the Planck dark matter bounds. We find that scenarios in the framework of… ▽ More We present a class of supersymmetric (SUSY) GUT models that can explain the apparent discrepancy between the SM predictions and experimental values of muon g-2 while providing testable signals for lepton flavor violation in charged lepton decays. Moreover, these models predict LSP neutralino abundance that is compatible with the Planck dark matter bounds. We find that scenarios in the framework of $SU(4)_c\times SU(2)_L\times SU(2)_R$ unification, with additional symmetries to explain fermion masses and neutrino oscillations, provide interesting benchmarks for the search of SUSY by correlating a possible manifestation of it in dark matter, rare lepton decays and LHC signals. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: 28 pages, 13 figures

Extending the self-discharge time of Dicke quantum batteries using molecular triplets

Authors: Daniel J. Tibben, Enrico Della Gaspera, Joel van Embden, Philipp Reineck, James Q. Quach, Francesco Campaioli, Daniel E. Gómez

Abstract: Quantum batteries, quantum systems for energy storage, have gained interest due to their potential scalable charging power density. A quantum battery proposal based on the Dicke model has been explored using organic microcavities, which enable a cavity-enhanced energy transfer process called superabsorption. However, energy storage lifetime in these devices is limited by fast radiative emission lo… ▽ More Quantum batteries, quantum systems for energy storage, have gained interest due to their potential scalable charging power density. A quantum battery proposal based on the Dicke model has been explored using organic microcavities, which enable a cavity-enhanced energy transfer process called superabsorption. However, energy storage lifetime in these devices is limited by fast radiative emission losses, worsened by superradiance. Here, we demonstrate a promising approach to extend the energy storage lifetime of Dicke quantum batteries using molecular triplet states. We examine a type of multi-layer microcavities where an active absorption layer transfers energy to the molecular triplets of a storage layer, identifying two regimes based on exciton-polariton resonances. We tested one of these mechanisms by fabricating and characterising five devices across a triplet-polariton resonance. We conclude by discussing potential optimisation outlooks for this class of devices. △ Less

Submitted 29 March, 2024; originally announced April 2024.

Comments: 9 pages, 5 figures. 6 supplementary pages, 4 supplementary figures

Testing autonomous vehicles and AI: perspectives and challenges from cybersecurity, transparency, robustness and fairness

Authors: David Fernández Llorca, Ronan Hamon, Henrik Junklewitz, Kathrin Grosse, Lars Kunze, Patrick Seiniger, Robert Swaim, Nick Reed, Alexandre Alahi, Emilia Gómez, Ignacio Sánchez, Akos Kriston

Abstract: This study explores the complexities of integrating Artificial Intelligence (AI) into Autonomous Vehicles (AVs), examining the challenges introduced by AI components and the impact on testing procedures, focusing on some of the essential requirements for trustworthy AI. Topics addressed include the role of AI at various operational layers of AVs, the implications of the EU's AI Act on AVs, and the… ▽ More This study explores the complexities of integrating Artificial Intelligence (AI) into Autonomous Vehicles (AVs), examining the challenges introduced by AI components and the impact on testing procedures, focusing on some of the essential requirements for trustworthy AI. Topics addressed include the role of AI at various operational layers of AVs, the implications of the EU's AI Act on AVs, and the need for new testing methodologies for Advanced Driver Assistance Systems (ADAS) and Automated Driving Systems (ADS). The study also provides a detailed analysis on the importance of cybersecurity audits, the need for explainability in AI decision-making processes and protocols for assessing the robustness and ethical behaviour of predictive systems in AVs. The paper identifies significant challenges and suggests future directions for research and development of AI in AV technology, highlighting the need for multidisciplinary expertise. △ Less

Submitted 21 February, 2024; originally announced March 2024.

Comments: 44 pages, 8 figures, submitted to a peer-review journal

Polariton-Based Room Temperature Quantum Phototransistors

Authors: Jhuma Dutta, Pooja Bhatt, Kuljeet Kaur, Daniel E. Gómez, **o George

Abstract: Strong light-matter coupling is a quantum process in which light and matter are coupled together, generating hybridized states. This is similar to the notion of molecular hybridization, but one of the components is light. Here, we utilized the idea and prepared quantum phototransistors using donor-acceptor combinations that can transfer energy via Rabi oscillations. As a prototype experiment, we u… ▽ More Strong light-matter coupling is a quantum process in which light and matter are coupled together, generating hybridized states. This is similar to the notion of molecular hybridization, but one of the components is light. Here, we utilized the idea and prepared quantum phototransistors using donor-acceptor combinations that can transfer energy via Rabi oscillations. As a prototype experiment, we used a cyanine J-aggregate (TDBC; donor) and MoS2 monolayer (acceptor) in a field effect transistor cavity and studied the photoresponsivity. The energy migrates through the newly formed polaritonic ladder, and the relative efficiency of the device is nearly seven-fold at the ON resonance. Further, the photon mixing fraction is calculated for each independent device and correlated with energy transfer efficiency. In the strongly coupled system, newly formed polaritonic states reshuffle the probability function. A theoretical model based on the time dependent Schrödinger equation is also used to interpret the results. Here, the entangled light-matter states act as a strong channel for funnelling the energy to the MoS2 monolayer, thereby boosting its ability to show the highest photoresponsivity at ON-resonance. These experimental findings and the proposed model suggest novel applications of strong light-matter coupling in quantum materials. △ Less

Submitted 17 February, 2024; originally announced February 2024.

Astronomy potential of KM3NeT/ARCA

Authors: S. Aiello, A. Albert, M. Alshamsi, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacová, B. Baret, A. Bariego-Quintana, A. Baruzzi, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati , et al. (253 additional authors not shown)

Abstract: The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potenti… ▽ More The KM3NeT/ARCA neutrino detector is currently under construction at 3500 m depth offshore Capo Passero, Sicily, in the Mediterranean Sea. The main science objectives are the detection of high-energy cosmic neutrinos and the discovery of their sources. Simulations were conducted for the full KM3NeT/ARCA detector, instrumenting a volume of 1 km$^3$, to estimate the sensitivity and discovery potential to point-like neutrino sources and an all-sky diffuse neutrino flux. This paper covers the reconstruction of track- and shower-like signatures, as well as the criteria employed for neutrino event selection. By leveraging both the track and shower observation channels, the KM3NeT/ARCA detector demonstrates the capability to detect the diffuse astrophysical neutrino flux within half a year of operation, achieving a 5$σ$ statistical significance. With an angular resolution below 0.1$^\circ$ for tracks and under 2$^\circ$ for showers, the sensitivity to point-like neutrino sources surpasses existing observed limits across the entire sky. △ Less

Submitted 29 March, 2024; v1 submitted 13 February, 2024; originally announced February 2024.

Comments: 20 pages, 30 figures Submitted to EPJ-C

The Jalisco Seismic Accelerometric Telemetric Network (RESAJ)

Authors: Francisco Javier Nunez Cornu, Juan Manuel Sandoval, Edgar Alarcon, Adan Gomez, Carlos Suarez Plascencia, Diana Nunez, Elizabeth Trejo Gomez, Oscar Sanchez Mariscal, J. Guadalupe Candelas Ortiz, Luz Maria Zuniga Medina

Abstract: The Jalisco region of western Mexico is the locus of interaction among the North America, Cocos, and Rivera plates, giving rise to the Jalisco block. This region is one of the most tectonically active in Mexico, and here took place the largest instrumentally recorded earthquake in Mexico the twentieth century, on 3 June 1932 (M 8.2), three important tsunamis in the last 100 yrs, and two of the mos… ▽ More The Jalisco region of western Mexico is the locus of interaction among the North America, Cocos, and Rivera plates, giving rise to the Jalisco block. This region is one of the most tectonically active in Mexico, and here took place the largest instrumentally recorded earthquake in Mexico the twentieth century, on 3 June 1932 (M 8.2), three important tsunamis in the last 100 yrs, and two of the most active volcanoes in Mexico. Nevertheless, the first seismicity studies here, undertaken with temporary networks, did not commence until 1994. In 2008, the Government of Jalisco and the University of Guadalajara funded a research project to install a seismic network in this region. The principal objective was to study the seismic hazard in the region and characterize seismic parameters in the different areas to design building codes. The Red Sismica y Acelerometrica Telemetrica de Jalisco (RESAJ) project was thus initiated in 2009. Its Central Lab is at Centro de Sismologia y Volcanologia de Occidente (SisVOc), located at the Universidad de Guadalajara in Puerto Vallarta. Currently, the RESAJ has 26 telemetered and 2 autonomous stations. The RESAJ serves as the seismological lab for the postgraduate program at SisVOc. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: Seismological Research Letters 2018

A Framework for Assessing Proportionate Intervention with Face Recognition Systems in Real-Life Scenarios

Authors: Pablo Negri, Isabelle Hupont, Emilia Gomez

Abstract: Face recognition (FR) has reached a high technical maturity. However, its use needs to be carefully assessed from an ethical perspective, especially in sensitive scenarios. This is precisely the focus of this paper: the use of FR for the identification of specific subjects in moderately to densely crowded spaces (e.g. public spaces, sports stadiums, train stations) and law enforcement scenarios. I… ▽ More Face recognition (FR) has reached a high technical maturity. However, its use needs to be carefully assessed from an ethical perspective, especially in sensitive scenarios. This is precisely the focus of this paper: the use of FR for the identification of specific subjects in moderately to densely crowded spaces (e.g. public spaces, sports stadiums, train stations) and law enforcement scenarios. In particular, there is a need to consider the trade-off between the need to protect privacy and fundamental rights of citizens as well as their safety. Recent Artificial Intelligence (AI) policies, notably the European AI Act, propose that such FR interventions should be proportionate and deployed only when strictly necessary. Nevertheless, concrete guidelines on how to address the concept of proportional FR intervention are lacking to date. This paper proposes a framework to contribute to assessing whether an FR intervention is proportionate or not for a given context of use in the above mentioned scenarios. It also identifies the main quantitative and qualitative variables relevant to the FR intervention decision (e.g. number of people in the scene, level of harm that the person(s) in search could perpetrate, consequences to individual rights and freedoms) and propose a 2D graphical model making it possible to balance these variables in terms of ethical cost vs security gain. Finally, different FR scenarios inspired by real-world deployments validate the proposed model. The framework is conceived as a simple support tool for decision makers when confronted with the deployment of an FR system. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: Submitted to the second revision round of IEEE Face and Gesture Recognition 2024

Aperiodic two-layer energy management system for community microgrids based on blockchain strategy

Authors: Miguel Gayo Abeleira, Carlos Santos Pérez, Francisco Javier Rodríguez Sánchez, Pedro Martín Sánchez, Enrique Santiso Gómez, José Antonio Jiménez Calvo

Abstract: This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is res… ▽ More This work proposes a geographically-based split of the community microgrids into clusters of members that tend to have similar consumption and generation profiles. Assuming a community microgrid divided into clusters, a two-layer architecture is developed to facilitate the greater penetration of distributed energy resources in an efficient way. The first layer, referred as the market layer, is responsible for creating local energy markets with the aim of maximising the economic benefits for community microgrid members. The second layer is responsible for the network reconfiguration, which is based on the energy balance within each cluster. This layer complies with the IEC 61850 communication standard, in order to control commercial sectionalizing and tie switches. This allows the community microgrid network to be reconfigured to minimise energy exchanges with the main grid. To implement this two-layer energy management strategy, an aperiodic market approach based on Blockchain technology, and the additional functionality offered by Smart Contracts is adopted. This embraces the concept of energy communities since it decentralizes the control and eliminates intermediaries. The use of aperiodic control techniques helps to overcome the challenges of using Blockchain technology in terms of storage, computational requirements and member privacy. The scalability and modularity of the Smart Contract-based system allow each cluster of members to be designed by tailoring the system to their specific needs. The implementation of this strategy is based on low-cost off-the-shelf devices, such as Raspberry Pi 4 Model B boards, which operate as Blockchain nodes of community microgrid members. Finally, the strategy has been validated by emulating two use cases based on the IEEE 123-node system network model highlighting the benefits of the proposal. △ Less

Submitted 6 February, 2024; originally announced February 2024.

Journal ref: Applied Energy, Volume 324, 2022, 119847, ISSN 0306-2619

A reformulation to Embedding a Neural Network in a linear program without integer variables

Authors: Héctor G. -de-Alba, Andres Tellez, Cipriano Santos, Emmanuel Gómez

Abstract: In this technical report, a new formulation for embedding a neural network into an optimization model is described. This formulation does not require binary variables to properly compute the output of the neural network for specific types of problems. Preliminary experiments show that this reformulation resulted in faster computation times when solving a proposed showcase model, in which non-linea… ▽ More In this technical report, a new formulation for embedding a neural network into an optimization model is described. This formulation does not require binary variables to properly compute the output of the neural network for specific types of problems. Preliminary experiments show that this reformulation resulted in faster computation times when solving a proposed showcase model, in which non-linearity is necessary to be computed. This is in comparison with the classic formulation and off-the-shelf tools of commercial solvers. △ Less

Submitted 3 February, 2024; originally announced February 2024.

MOReGIn: Multi-Objective Recommendation at the Global and Individual Levels

Authors: Elizabeth Gómez, David Contreras, Ludovico Boratto, Maria Salamó

Abstract: Multi-Objective Recommender Systems (MORSs) emerged as a paradigm to guarantee multiple (often conflicting) goals. Besides accuracy, a MORS can operate at the global level, where additional beyond-accuracy goals are met for the system as a whole, or at the individual level, meaning that the recommendations are tailored to the needs of each user. The state-of-the-art MORSs either operate at the glo… ▽ More Multi-Objective Recommender Systems (MORSs) emerged as a paradigm to guarantee multiple (often conflicting) goals. Besides accuracy, a MORS can operate at the global level, where additional beyond-accuracy goals are met for the system as a whole, or at the individual level, meaning that the recommendations are tailored to the needs of each user. The state-of-the-art MORSs either operate at the global or individual level, without assuming the co-existence of the two perspectives. In this study, we show that when global and individual objectives co-exist, MORSs are not able to meet both types of goals. To overcome this issue, we present an approach that regulates the recommendation lists so as to guarantee both global and individual perspectives, while preserving its effectiveness. Specifically, as individual perspective, we tackle genre calibration and, as global perspective, provider fairness. We validate our approach on two real-world datasets, publicly released with this paper. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Attribute Annotation and Bias Evaluation in Visual Datasets for Autonomous Driving

Authors: David Fernández Llorca, Pedro Frau, Ignacio Parra, Rubén Izquierdo, Emilia Gómez

Abstract: This paper addresses the often overlooked issue of fairness in the autonomous driving domain, particularly in vision-based perception and prediction systems, which play a pivotal role in the overall functioning of Autonomous Vehicles (AVs). We focus our analysis on biases present in some of the most commonly used visual datasets for training person and vehicle detection systems. We introduce an an… ▽ More This paper addresses the often overlooked issue of fairness in the autonomous driving domain, particularly in vision-based perception and prediction systems, which play a pivotal role in the overall functioning of Autonomous Vehicles (AVs). We focus our analysis on biases present in some of the most commonly used visual datasets for training person and vehicle detection systems. We introduce an annotation methodology and a specialised annotation tool, both designed to annotate protected attributes of agents in visual datasets. We validate our methodology through an inter-rater agreement analysis and provide the distribution of attributes across all datasets. These include annotations for the attributes age, sex, skin tone, group, and means of transport for more than 90K people, as well as vehicle type, colour, and car type for over 50K vehicles. Generally, diversity is very low for most attributes, with some groups, such as children, wheelchair users, or personal mobility vehicle users, being extremely underrepresented in the analysed datasets. The study contributes significantly to efforts to consider fairness in the evaluation of perception and prediction systems for AVs. This paper follows reproducibility principles. The annotation tool, scripts and the annotated attributes can be accessed publicly at https://github.com/ec-jrc/humaint_annotator. △ Less

Submitted 11 December, 2023; originally announced December 2023.

Comments: Paper submitted to the IEEE TIV journal; 17 pages, 16 figures, 10 tables

The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, F. Badaracco, L. Bailly-Salins, Z. Bardacova, B. Baret, A. Bariego Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (259 additional authors not shown)

Abstract: The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl… ▽ More The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan △ Less

Submitted 24 November, 2023; originally announced November 2023.

Searches for neutrino counterparts of gravitational waves from the LIGO/Virgo third observing run with KM3NeT

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, L. Bailly-Salins, Z. Bardačová, B. Baret, A. Bariego-Quintana, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (251 additional authors not shown)

Abstract: The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIG… ▽ More The KM3NeT neutrino telescope is currently being deployed at two different sites in the Mediterranean Sea. First searches for astrophysical neutrinos have been performed using data taken with the partial detector configuration already in operation. The paper presents the results of two independent searches for neutrinos from compact binary mergers detected during the third observing run of the LIGO and Virgo gravitational wave interferometers. The first search looks for a global increase in the detector counting rates that could be associated with inverse beta decay events generated by MeV-scale electron anti-neutrinos. The second one focuses on upgoing track-like events mainly induced by muon (anti-)neutrinos in the GeV--TeV energy range. Both searches yield no significant excess for the sources in the gravitational wave catalogs. For each source, upper limits on the neutrino flux and on the total energy emitted in neutrinos in the respective energy ranges have been set. Stacking analyses of binary black hole mergers and neutron star-black hole mergers have also been performed to constrain the characteristic neutrino emission from these categories. △ Less

Submitted 7 May, 2024; v1 submitted 7 November, 2023; originally announced November 2023.

Comments: 19 pages, 11 figures

Journal ref: JCAP 04 (2024) 026

Photometry of the Didymos system across the DART impact apparition

Authors: Nicholas Moskovitz, Cristina Thomas, Petr Pravec, Tim Lister, Tom Polakis, David Osip, Theodore Kareta, Agata Rożek, Steven R. Chesley, Shantanu P. Naidu, Peter Scheirich, William Ryan, Eileen Ryan, Brian Skiff, Colin Snodgrass, Matthew M. Knight, Andrew S. Rivkin, Nancy L. Chabot, Vova Ayvazian, Irina Belskaya, Zouhair Benkhaldoun, Daniel N. Berteşteanu, Mariangela Bonavita, Terrence H. Bressi, Melissa J. Brucker , et al. (56 additional authors not shown)

Abstract: On 26 September 2022, the Double Asteroid Redirection Test (DART) spacecraft impacted Dimorphos, the satellite of binary near-Earth asteroid (65803) Didymos. This demonstrated the efficacy of a kinetic impactor for planetary defense by changing the orbital period of Dimorphos by 33 minutes (Thomas et al. 2023). Measuring the period change relied heavily on a coordinated campaign of lightcurve phot… ▽ More On 26 September 2022, the Double Asteroid Redirection Test (DART) spacecraft impacted Dimorphos, the satellite of binary near-Earth asteroid (65803) Didymos. This demonstrated the efficacy of a kinetic impactor for planetary defense by changing the orbital period of Dimorphos by 33 minutes (Thomas et al. 2023). Measuring the period change relied heavily on a coordinated campaign of lightcurve photometry designed to detect mutual events (occultations and eclipses) as a direct probe of the satellite's orbital period. A total of 28 telescopes contributed 224 individual lightcurves during the impact apparition from July 2022 to February 2023. We focus here on decomposable lightcurves, i.e. those from which mutual events could be extracted. We describe our process of lightcurve decomposition and use that to release the full data set for future analysis. We leverage these data to place constraints on the post-impact evolution of ejecta. The measured depths of mutual events relative to models showed that the ejecta became optically thin within the first ~1 day after impact, and then faded with a decay time of about 25 days. The bulk magnitude of the system showed that ejecta no longer contributed measurable brightness enhancement after about 20 days post-impact. This bulk photometric behavior was not well represented by an HG photometric model. An HG1G2 model did fit the data well across a wide range of phase angles. Lastly, we note the presence of an ejecta tail through at least March 2023. Its persistence implied ongoing escape of ejecta from the system many months after DART impact. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Comments: 52 pages, 5 tables, 9 figures, accepted to PSJ

SYNPA: SMT Performance Analysis and Allocation of Threads to Cores in ARM Processors

Authors: Marta Navarro, Josué Feliu, Salvador Petit, María E. Gómez, Julio Sahuquillo

Abstract: Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. T… ▽ More Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the interference effects depends on the competing co-runners sharing the core. Thus, it can be mitigated by applying a thread-to-core allocation policy that smartly selects applications to be run in the same core to minimize their interference. This paper presents SYNPA, a simple approach that dynamically allocates threads to cores in an SMT processor based on their run-time dynamic behavior. The approach uses a regression model to select synergistic pairs to mitigate intra-core interference. The main novelty of SYNPA is that it uses just three variables collected from the performance counters available in current ARM processors at the dispatch stage. Experimental results show that SYNPA outperforms the default Linux scheduler by around 36%, on average, in terms of turnaround time in 8-application workloads combining frontend bound and backend bound benchmarks. △ Less

Submitted 19 October, 2023; originally announced October 2023.

Comments: 11 pages, 9 figures

Ejecta Evolution Following a Planned Impact into an Asteroid: The First Five Weeks

Authors: Theodore Kareta, Cristina Thomas, Jian-Yang Li, Matthew M. Knight, Nicholas Moskovitz, Agata Rozek, Michele T. Bannister, Simone Ieva, Colin Snodgrass, Petr Pravec, Eileen V. Ryan, William H. Ryan, Eugene G. Fahnestock, Andrew S. Rivkin, Nancy Chabot, Alan Fitzsimmons, David Osip, Tim Lister, Gal Sarid, Masatoshi Hirabayashi, Tony Farnham, Gonzalo Tancredi, Patrick Michel, Richard Wainscoat, Rob Weryk , et al. (63 additional authors not shown)

Abstract: The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consis… ▽ More The impact of the DART spacecraft into Dimorphos, moon of the asteroid Didymos, changed Dimorphos' orbit substantially, largely from the ejection of material. We present results from twelve Earth-based facilities involved in a world-wide campaign to monitor the brightness and morphology of the ejecta in the first 35 days after impact. After an initial brightening of ~1.4 magnitudes, we find consistent dimming rates of 0.11-0.12 magnitudes/day in the first week, and 0.08-0.09 magnitudes/day over the entire study period. The system returned to its pre-impact brightness 24.3-25.3 days after impact through the primary ejecta tail remained. The dimming paused briefly eight days after impact, near in time to the appearance of the second tail. This was likely due to a secondary release of material after re-impact of a boulder released in the initial impact, through movement of the primary ejecta through the aperture likely played a role. △ Less

Submitted 18 October, 2023; originally announced October 2023.

Comments: 16 pages, 5 Figures, accepted in the Astrophysical Journal Letters (ApJL) on October 16, 2023

A planetary collision afterglow and transit of the resultant debris cloud

Authors: Matthew Kenworthy, Simon Lock, Grant Kennedy, Richelle van Capelleveen, Eric Mamajek, Ludmila Carone, Franz-Josef Hambsch, Joseph Masiero, Amy Mainzer, J. Davy Kirkpatrick, Edward Gomez, Zoë Leinhardt, **gyao Dou, Pavan Tanna, Arttu Sainio, Hamish Barker, Stéphane Charbonnel, Olivier Garde, Pascal Le Dû, Lionel Mulato, Thomas Petit, Michael Rizzo Smith

Abstract: Planets grow in rotating disks of dust and gas around forming stars, some of which can subsequently collide in giant impacts after the gas component is removed from the disk. Monitoring programs with the warm Spitzer mission have recorded significant and rapid changes in mid-infrared output for several stars, interpreted as variations in the surface area of warm dusty material ejected by planetary… ▽ More Planets grow in rotating disks of dust and gas around forming stars, some of which can subsequently collide in giant impacts after the gas component is removed from the disk. Monitoring programs with the warm Spitzer mission have recorded significant and rapid changes in mid-infrared output for several stars, interpreted as variations in the surface area of warm dusty material ejected by planetary-scale collisions and heated by the central star: e.g., NGC 2354-ID8, HD 166191 and V844 Persei. Here we report combined observations of the young (about 300 Myr), solar-like star ASASSN-21qj: an infrared brightening consistent with a blackbody temperature of 1000 K and a luminosity of 4 percent of that of the star lasting for about 1000 days, partially overlap** in time with a complex and deep wavelength-dependent optical eclipse that lasted for about 500 days. The optical eclipse started 2.5 years after the infrared brightening, implying an orbital period of at least that duration. These observations are consistent with a collision between two exoplanets of several to tens of Earth masses at 2 to 16 au from the central star. Such an impact produces a hot, highly-extended post-impact remnant with sufficient luminosity to explain the infrared observations. Transit of the impact debris, sheared by orbital motion into a long cloud, causes the subsequent complex eclipse of the host star. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 28 pages, 9 figures, 2 tables, author's Accepted Manuscript version, reproducible workflow built with showyourwork; open-source code can be found at https://github.com/mkenworthy/ASASSN-21qj-collision/

Journal ref: 2023, Nature, 622, 251-254. Published 2023 October 11 at https://www.nature.com/articles/s41586-023-06573-9

Towards Automated Accessibility Report Generation for Mobile Apps

Authors: Amanda Swearngin, Jason Wu, Xiaoyi Zhang, Esteban Gomez, Jen Coughenour, Rachel Stukenborg, Bhavya Garg, Greg Hughes, Adriana Hilliard, Jeffrey P. Bigham, Jeffrey Nichols

Abstract: Many apps have basic accessibility issues, like missing labels or low contrast. Automated tools can help app developers catch basic issues, but can be laborious or require writing dedicated tests. We propose a system, motivated by a collaborative process with accessibility stakeholders at a large technology company, to generate whole app accessibility reports by combining varied data collection me… ▽ More Many apps have basic accessibility issues, like missing labels or low contrast. Automated tools can help app developers catch basic issues, but can be laborious or require writing dedicated tests. We propose a system, motivated by a collaborative process with accessibility stakeholders at a large technology company, to generate whole app accessibility reports by combining varied data collection methods (e.g., app crawling, manual recording) with an existing accessibility scanner. Many such scanners are based on single-screen scanning, and a key problem in whole app accessibility reporting is to effectively de-duplicate and summarize issues collected across an app. To this end, we developed a screen grou** model with 96.9% accuracy (88.8% F1-score) and UI element matching heuristics with 97% accuracy (98.2% F1-score). We combine these technologies in a system to report and summarize unique issues across an app, and enable a unique pixel-based ignore feature to help engineers and testers better manage reported issues across their app's lifetime. We conducted a qualitative evaluation with 18 accessibility-focused engineers and testers which showed this system can enhance their existing accessibility testing toolkit and address key limitations in current accessibility scanning tools. △ Less

Submitted 16 October, 2023; v1 submitted 29 September, 2023; originally announced October 2023.

Comments: 24 pages, 8 figures

HUVECs-encapsulation via Millimeter-sized Alginate Droplets

Authors: Khanh Tran, Brenda A. A. B. Ametepe, Erika L. Gomez, Daniel Ramos, Clare Kim, Ga-Young Kelly Suh, Siavash Ahrar, Perla Ayala

Abstract: Droplet microfluidics are a powerful approach for hydrogel cell encapsulations. Much of the field has focused on single-cell encapsulations with pico-nanoliter droplet volumes necessary for single-cell sequencing or high-throughput screening. These small volumes, however, limit the use of hydrogel droplets for tissue engineering or cell therapies. We describe simple droplet microfluidics to genera… ▽ More Droplet microfluidics are a powerful approach for hydrogel cell encapsulations. Much of the field has focused on single-cell encapsulations with pico-nanoliter droplet volumes necessary for single-cell sequencing or high-throughput screening. These small volumes, however, limit the use of hydrogel droplets for tissue engineering or cell therapies. We describe simple droplet microfluidics to generate millimeter-sized alginate droplets and demonstrate their use for cell encapsulations. This effort builds on our recent efforts, specifically by replacing the glass slide forming the bottom layer of the chamber with a more hydrophobic acrylic (PMMA) layer to improve the alginate-in-oil droplet formation. Using glass layer and PMMA layer devices, we characterized the tunable production of water-in-oil droplets (average droplet lengths ranged from 0.8 to 3.7 mm). Next, PMMA layer devices were used to demonstrate the tunable generation of alginate-in-oil droplets (average droplet lengths ranged from 3-6 mm). Increasing the flow ratio (Q.ratio = Q.oil/Q.alginate) led to more uniform droplets as measured by the coefficient of variance, which was approximately 5%. Finally, a proof-of-use experiment used HUVEC-encapsulated alginate droplets as part of a scratch-healing assay. Specifically, HUVEC-encapsulated droplets (AH droplets) led to the recovery of 3T3 fibroblast monolayers compared to no droplets or cell-free droplets (A droplets). Our results extended the use of simple microfluidics to generate and retrieve millimeter-sized alginate droplets for effective cell encapsulations. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: 13 pages, 6 figures

Behind Recommender Systems: the Geography of the ACM RecSys Community

Authors: Lorenzo Porcaro, João Vinagre, Pedro Frau, Isabelle Hupont, Emilia Gómez

Abstract: The amount and dissemination rate of media content accessible online is nowadays overwhelming. Recommender Systems filter this information into manageable streams or feeds, adapted to our personal needs or preferences. It is of utter importance that algorithms employed to filter information do not distort or cut out important elements from our perspectives of the world. Under this principle, it is… ▽ More The amount and dissemination rate of media content accessible online is nowadays overwhelming. Recommender Systems filter this information into manageable streams or feeds, adapted to our personal needs or preferences. It is of utter importance that algorithms employed to filter information do not distort or cut out important elements from our perspectives of the world. Under this principle, it is essential to involve diverse views and teams from the earliest stages of their design and development. This has been highlighted, for instance, in recent European Union regulations such as the Digital Services Act, via the requirement of risk monitoring, including the risk of discrimination, and the AI Act, through the requirement to involve people with diverse backgrounds in the development of AI systems. We look into the geographic diversity of the recommender systems research community, specifically by analyzing the affiliation countries of the authors who contributed to the ACM Conference on Recommender Systems (RecSys) during the last 15 years. This study has been carried out in the framework of the Diversity in AI - DivinAI project, whose main objective is the long-term monitoring of diversity in AI forums through a set of indexes. △ Less

Submitted 7 September, 2023; originally announced September 2023.

Comments: Presented at the 6th FAccTRec Workshop: Responsible Recommendation (FAccTRec '23), September 18, 2023, Singapore

Prospects for combined analyses of hadronic emission from $γ$-ray sources in the Milky Way with CTA and KM3NeT

Authors: T. Unbehaun, L. Mohrmann, S. Funk, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anghinolfi, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, C. Bagatelas, L. Bailly-Salins, Z. Bardačová, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman , et al. (249 additional authors not shown)

Abstract: The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contri… ▽ More The Cherenkov Telescope Array and the KM3NeT neutrino telescopes are major upcoming facilities in the fields of $γ$-ray and neutrino astronomy, respectively. Possible simultaneous production of $γ$ rays and neutrinos in astrophysical accelerators of cosmic-ray nuclei motivates a combination of their data. We assess the potential of a combined analysis of CTA and KM3NeT data to determine the contribution of hadronic emission processes in known Galactic $γ$-ray emitters, comparing this result to the cases of two separate analyses. In doing so, we demonstrate the capability of Gammapy, an open-source software package for the analysis of $γ$-ray data, to also process data from neutrino telescopes. For a selection of prototypical $γ$-ray sources within our Galaxy, we obtain models for primary proton and electron spectra in the hadronic and leptonic emission scenario, respectively, by fitting published $γ$-ray spectra. Using these models and instrument response functions for both detectors, we employ the Gammapy package to generate pseudo data sets, where we assume 200 hours of CTA observations and 10 years of KM3NeT detector operation. We then apply a three-dimensional binned likelihood analysis to these data sets, separately for each instrument and jointly for both. We find that the largest benefit of the combined analysis lies in the possibility of a consistent modelling of the $γ$-ray and neutrino emission. Assuming a purely leptonic scenario as input, we obtain, for the most favourable source, an average expected 68% credible interval that constrains the contribution of hadronic processes to the observed $γ$-ray emission to below 15%. △ Less

Submitted 2 February, 2024; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 20 pages, 16 figures. v2: Matches version published in EPJC

Journal ref: European Physical Journal C 84, 112 (2024)

Embedded Software of the KM3NeT Central Logic Board

Authors: S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, E. Androutsou, M. Anghinolfi, M. Anguita, L. Aphecetche, M. Ardid, S. Ardid, H. Atmani, J. Aublin, C. Bagatelas, L. Bailly-Salins, Z. Bardačová, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, M. Benhassi, D. M. Benoit , et al. (249 additional authors not shown)

Abstract: The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery… ▽ More The KM3NeT Collaboration is building and operating two deep sea neutrino telescopes at the bottom of the Mediterranean Sea. The telescopes consist of latices of photomultiplier tubes housed in pressure-resistant glass spheres, called digital optical modules and arranged in vertical detection units. The two main scientific goals are the determination of the neutrino mass ordering and the discovery and observation of high-energy neutrino sources in the Universe. Neutrinos are detected via the Cherenkov light, which is induced by charged particles originated in neutrino interactions. The photomultiplier tubes convert the Cherenkov light into electrical signals that are acquired and timestamped by the acquisition electronics. Each optical module houses the acquisition electronics for collecting and timestam** the photomultiplier signals with one nanosecond accuracy. Once finished, the two telescopes will have installed more than six thousand optical acquisition nodes, completing one of the more complex networks in the world in terms of operation and synchronization. The embedded software running in the acquisition nodes has been designed to provide a framework that will operate with different hardware versions and functionalities. The hardware will not be accessible once in operation, which complicates the embedded software architecture. The embedded software provides a set of tools to facilitate remote manageability of the deployed hardware, including safe reconfiguration of the firmware. This paper presents the architecture and the techniques, methods and implementation of the embedded software running in the acquisition nodes of the KM3NeT neutrino telescopes. △ Less

Submitted 12 October, 2023; v1 submitted 2 August, 2023; originally announced August 2023.

Non-Markovianity in High-Dimensional Open Quantum Systems using Next-generation Multicore Optical Fibers

Authors: Santiago Rojas-Rojas, Daniel Martínez, Kei Sawada, Luciano Pereira, Stephen P. Walborn, Esteban S. Gómez, Nadja K. Bernardes, Gustavo Lima

Abstract: With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high dimensional non-Markovian open quantum system in a multi-co… ▽ More With the advent of quantum technology, the interest in communication tasks assisted by quantum systems has increased both in academia and industry. Nonetheless, the transmission of a quantum state in real-world scenarios is bounded by environmental noise, so that the quantum channel is an open quantum system. In this work, we study a high dimensional non-Markovian open quantum system in a multi-core optical fiber by characterizing the environmental interaction as quantum operations, which here correspond to phase flips between pairs of computational basis states. The experimental platform is currently state-of-the-art for space division multiplexing optical fiber communication, which can serve as a robust channel for high-dimensional quantum communication. To test the channel, we perform a quantum communication task in the prepare-and-measure scenario. The non-Markovian nature of the system is demonstrated by implementing a Quantum Vault protocol. A better understanding of the phase noise in multi-core fibers could improve the stability and quality of several real-world communication protocols since they are a prime candidate to increase the telecom data transmission rate worldwide. △ Less

Submitted 31 July, 2023; originally announced August 2023.

Comments: 11 pages, 6 figures

Use case cards: a use case reporting framework inspired by the European AI Act

Authors: Isabelle Hupont, David Fernández-Llorca, Sandra Baldassarri, Emilia Gómez

Abstract: Despite recent efforts by the Artificial Intelligence (AI) community to move towards standardised procedures for documenting models, methods, systems or datasets, there is currently no methodology focused on use cases aligned with the risk-based approach of the European AI Act (AI Act). In this paper, we propose a new framework for the documentation of use cases, that we call "use case cards", bas… ▽ More Despite recent efforts by the Artificial Intelligence (AI) community to move towards standardised procedures for documenting models, methods, systems or datasets, there is currently no methodology focused on use cases aligned with the risk-based approach of the European AI Act (AI Act). In this paper, we propose a new framework for the documentation of use cases, that we call "use case cards", based on the use case modelling included in the Unified Markup Language (UML) standard. Unlike other documentation methodologies, we focus on the intended purpose and operational use of an AI system. It consists of two main parts. Firstly, a UML-based template, tailored to allow implicitly assessing the risk level of the AI system and defining relevant requirements. Secondly, a supporting UML diagram designed to provide information about the system-user interactions and relationships. The proposed framework is the result of a co-design process involving a relevant team of EU policy experts and scientists. We have validated our proposal with 11 experts with different backgrounds and a reasonable knowledge of the AI Act as a prerequisite. We provide the 5 "use case cards" used in the co-design and validation process. "Use case cards" allows framing and contextualising use cases in an effective way, and we hope this methodology can be a useful tool for policy makers and providers for documenting use cases, assessing the risk level, adapting the different requirements and building a catalogue of existing usages of AI. △ Less

Submitted 23 June, 2023; originally announced June 2023.

Comments: 33 pages, 9 figures

Splitting of Long-Period Comet C/2018 F4 (PANSTARRS)

Authors: Man-To Hui, Michael S. P. Kelley, Denise Hung, Tim Lister, Joseph Chatelain, Edward Gomez, Sarah Greenstreet

Abstract: Long-period comet C/2018 F4 (PANSTARRS) was observed to show duplicity of its inner region in 2020 September, suggestive of a splitting event. We here present analyses of our observations of the comet taken from the LOOK project and the University of Hawaii 2.2 m telescope after the discovery of the splitting. The two fragments Components A and B, estimated to be $\sim\!60$ m to 4 km in radius, re… ▽ More Long-period comet C/2018 F4 (PANSTARRS) was observed to show duplicity of its inner region in 2020 September, suggestive of a splitting event. We here present analyses of our observations of the comet taken from the LOOK project and the University of Hawaii 2.2 m telescope after the discovery of the splitting. The two fragments Components A and B, estimated to be $\sim\!60$ m to 4 km in radius, remained highly similar to each other in terms of brightness, colour, and dust morphology throughout our observing campaign from 2020 September to 2021 December. Our fragmentation model yielded that the two components split at a relative speed of $3.00 \pm 0.18$ m s$^{-1}$ in 2020 late April, implying a specific energy change of $\left(5.3 \pm 2.8 \right) \times 10^3$ J kg$^{-1}$, and that Component B was subjected to a stronger nongravitational acceleration than Component A in both the radial and normal directions of the orbit. The obtained splitting time is broadly consistent with the result from the dust morphology analysis, which further suggested that the dominant dust grains were millimeter-sized and ejected at speed $\sim\!2$ m s$^{-1}$. We postulate that the pre-split nucleus of the comet consisted of two lobes resembling the one of 67P, or that the comet used to be a binary system like main-belt comet 288P. Regardless, we highlight the possibility of using observations of split comets as a feasible manner to study the bilobate shape or binarity fraction of cometary nuclei. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: Accepted to AJ for publication

GenQ: Automated Question Generation to Support Caregivers While Reading Stories with Children

Authors: Arun Balajiee Lekshmi Narayanan, Ligia E. Gomez, Martha Michelle Soto Fernandez, Tri Nguyen, Chris Blais, M. Adelaida Restrepo, Art Glenberg

Abstract: When caregivers ask open--ended questions to motivate dialogue with children, it facilitates the child's reading comprehension skills.Although there is scope for use of technological tools, referred here as "intelligent tutoring systems", to scaffold this process, it is currently unclear whether existing intelligent systems that generate human--language like questions is beneficial. Additionally,… ▽ More When caregivers ask open--ended questions to motivate dialogue with children, it facilitates the child's reading comprehension skills.Although there is scope for use of technological tools, referred here as "intelligent tutoring systems", to scaffold this process, it is currently unclear whether existing intelligent systems that generate human--language like questions is beneficial. Additionally, training data used in the development of these automated question generation systems is typically sourced without attention to demographics, but people with different cultural backgrounds may ask different questions. As a part of a broader project to design an intelligent reading support app for Latinx children, we crowdsourced questions from Latinx caregivers and noncaregivers as well as caregivers and noncaregivers from other demographics. We examine variations in question--asking within this dataset mediated by individual, cultural, and contextual factors. We then design a system that automatically extracts templates from this data to generate open--ended questions that are representative of those asked by Latinx caregivers. △ Less

Submitted 25 September, 2023; v1 submitted 26 May, 2023; originally announced May 2023.

CACTUS: A Computational Framework for Generating Realistic White Matter Microstructure Substrates

Authors: Juan Luis Villarreal-Haro, Remy Gardier, Erick J Canales-Rodriguez, Elda Fischi Gomez, Gabriel Girard, Jean-Philippe Thiran, Jonathan Rafael-Patino

Abstract: Monte-Carlo diffusion simulations are a powerful tool for validating tissue microstructure models by generating synthetic diffusion-weighted magnetic resonance images (DW-MRI) in controlled environments. This is fundamental for understanding the link between micrometre-scale tissue properties and DW-MRI signals measured at the millimetre-scale, optimising acquisition protocols to target microstruc… ▽ More Monte-Carlo diffusion simulations are a powerful tool for validating tissue microstructure models by generating synthetic diffusion-weighted magnetic resonance images (DW-MRI) in controlled environments. This is fundamental for understanding the link between micrometre-scale tissue properties and DW-MRI signals measured at the millimetre-scale, optimising acquisition protocols to target microstructure properties of interest, and exploring the robustness and accuracy of estimation methods. However, accurate simulations require substrates that reflect the main microstructural features of the studied tissue. To address this challenge, we introduce a novel computational workflow, CACTUS (Computational Axonal Configurator for Tailored and Ultradense Substrates), for generating synthetic white matter substrates. Our approach allows constructing substrates with higher packing density than existing methods, up to 95 % intra-axonal volume fraction, and larger voxel sizes of up to (500um) 3 with rich fibre complexity. CACTUS generates bundles with angular dispersion, bundle crossings, and variations along the fibres of their inner and outer radii and g-ratio. We achieve this by introducing a novel global cost function and a fibre radial growth approach that allows substrates to match predefined targeted characteristics and mirror those reported in histological studies. CACTUS improves the development of complex synthetic substrates, paving the way for future applications in microstructure imaging. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Comments: 21 pages, 7 figures

Fairness and Diversity in Information Access Systems

Authors: Lorenzo Porcaro, Carlos Castillo, Emilia Gómez, João Vinagre

Abstract: Among the seven key requirements to achieve trustworthy AI proposed by the High-Level Expert Group on Artificial Intelligence (AI-HLEG) established by the European Commission (EC), the fifth requirement ("Diversity, non-discrimination and fairness") declares: "In order to achieve Trustworthy AI, we must enable inclusion and diversity throughout the entire AI system's life cycle. [...] This require… ▽ More Among the seven key requirements to achieve trustworthy AI proposed by the High-Level Expert Group on Artificial Intelligence (AI-HLEG) established by the European Commission (EC), the fifth requirement ("Diversity, non-discrimination and fairness") declares: "In order to achieve Trustworthy AI, we must enable inclusion and diversity throughout the entire AI system's life cycle. [...] This requirement is closely linked with the principle of fairness". In this paper, we try to shed light on how closely these two distinct concepts, diversity and fairness, may be treated by focusing on information access systems and ranking literature. These concepts should not be used interchangeably because they do represent two different values, but what we argue is that they also cannot be considered totally unrelated or divergent. Having diversity does not imply fairness, but fostering diversity can effectively lead to fair outcomes, an intuition behind several methods proposed to mitigate the disparate impact of information access systems, i.e. recommender systems and search engines. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Comments: Presented at the European Workshop on Algorithmic Fairness (EWAF'23) Winterthur, Switzerland, June 7-9, 2023

Optimal high-dimensional entanglement concentration in the bipartite scenario

Authors: L. Palma Torres, M. A. Solís-Prosser, O. Jiménez, E. S. Gómez, A. Delgado

Abstract: Considering pure quantum states, entanglement concentration is the procedure where from $N$ copies of a partially entangled state, a single state with higher entanglement can be obtained. Getting a maximally entangled state is possible for $N=1$. However, the associated success probability can be extremely low while increasing the system's dimensionality. In this work, we study two methods to achi… ▽ More Considering pure quantum states, entanglement concentration is the procedure where from $N$ copies of a partially entangled state, a single state with higher entanglement can be obtained. Getting a maximally entangled state is possible for $N=1$. However, the associated success probability can be extremely low while increasing the system's dimensionality. In this work, we study two methods to achieve a probabilistic entanglement concentration for bipartite quantum systems with a large dimensionality for $N=1$, regarding a reasonably good probability of success at the expense of having a non-maximal entanglement. Firstly, we define an efficiency function $\mathcal{Q}$ considering a tradeoff between the amount of entanglement (quantified by the I-Concurrence) of the final state after the concentration procedure and its success probability, which leads to solving a quadratic optimization problem. We found an analytical solution, ensuring that an optimal scheme for entanglement concentration can always be found in terms of $\mathcal{Q}$. Finally, a second method was explored, which is based on fixing the success probability and searching for the maximum amount of entanglement attainable. Both ways resemble the Procrustean method applied to a subset of the most significant Schmidt coefficients but obtaining non-maximally entangled states. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: 11 pages, 4 figures

Orbital Period Change of Dimorphos Due to the DART Kinetic Impact

Authors: Cristina A. Thomas, Shantanu P. Naidu, Peter Scheirich, Nicholas A. Moskovitz, Petr Pravec, Steven R. Chesley, Andrew S. Rivkin, David J. Osip, Tim A. Lister, Lance A. M. Benner, Marina Brozović, Carlos Contreras, Nidia Morrell, Agata Rożek, Peter Kušnirák, Kamil Hornoch, Declan Mages, Patrick A. Taylor, Andrew D. Seymour, Colin Snodgrass, Uffe G. Jørgensen, Martin Dominik, Brian Skiff, Tom Polakis, Matthew M. Knight , et al. (24 additional authors not shown)

Abstract: The Double Asteroid Redirection Test (DART) spacecraft successfully performed the first test of a kinetic impactor for asteroid deflection by impacting Dimorphos, the secondary of near-Earth binary asteroid (65803) Didymos, and changing the orbital period of Dimorphos. A change in orbital period of approximately 7 minutes was expected if the incident momentum from the DART spacecraft was directly… ▽ More The Double Asteroid Redirection Test (DART) spacecraft successfully performed the first test of a kinetic impactor for asteroid deflection by impacting Dimorphos, the secondary of near-Earth binary asteroid (65803) Didymos, and changing the orbital period of Dimorphos. A change in orbital period of approximately 7 minutes was expected if the incident momentum from the DART spacecraft was directly transferred to the asteroid target in a perfectly inelastic collision, but studies of the probable impact conditions and asteroid properties indicated that a considerable momentum enhancement ($β$) was possible. In the years prior to impact, we used lightcurve observations to accurately determine the pre-impact orbit parameters of Dimorphos with respect to Didymos. Here we report the change in the orbital period of Dimorphos as a result of the DART kinetic impact to be -33.0 +/- 1.0 (3$σ$) minutes. Using new Earth-based lightcurve and radar observations, two independent approaches determined identical values for the change in the orbital period. This large orbit period change suggests that ejecta contributed a significant amount of momentum to the asteroid beyond what the DART spacecraft carried. △ Less

Submitted 3 March, 2023; originally announced March 2023.

Comments: Accepted by Nature

Magnetization reversal in FePt thin films: Experiments and simulations

Authors: Augusto Román, Agustín Lopez Pedroso, Karim Bouzehouane, Javier Enrique Gómez, Alejandro Butera, Myriam Haydee Aguirre, Marcio Soares Medeiros, Carlos Garcia, Laura Beatriz Steren

Abstract: The competition between shape and perpendicular magnetic anisotropies (PMA) in magnetic thin films gives rise to unusual magnetic behaviors. In ferromagnetic films with moderate PMA the magnetic domain configuration transitions from planar to stripe-like domains above a critical thickness, $t_c$. In this article, we present a detailed study of the magnetization switching mechanism in FePt thin fil… ▽ More The competition between shape and perpendicular magnetic anisotropies (PMA) in magnetic thin films gives rise to unusual magnetic behaviors. In ferromagnetic films with moderate PMA the magnetic domain configuration transitions from planar to stripe-like domains above a critical thickness, $t_c$. In this article, we present a detailed study of the magnetization switching mechanism in FePt thin films, where this phenomenon is observed. Using micromagnetic simulations and experiments, we found that below $t_c$ the reversal mechanism is well described by the two-phase model while above this thickness the magnetization within each stripe reverses by coherent rotation. We also analyzed the PMA and its temperature dependence, probing that substrate-induced strains are responsible for the abnormal coercive field behavior observed for FePt films with $t>t_c$. △ Less

Submitted 16 February, 2023; originally announced February 2023.

Comments: 7 pages, 13 figures

Report number: A01

Probing invisible neutrino decay with KM3NeT-ORCA

Authors: KM3NeT Collaboration, S. Aiello, A. Albert, S. Alves Garre, Z. Aly, A. Ambrosone, F. Ameli, M. Andre, M. Anghinolfi, M. Anguita, M. Ardid, S. Ardid, J. Aublin, C. Bagatelas, L. Bailly-Salins, B. Baret, S. Basegmez du Pree, Y. Becherini, M. Bendahman, F. Benfenati, E. Berbee, V. Bertin, S. Biagi, M. Boettcher, M. Bou Cabo , et al. (230 additional authors not shown)

Abstract: In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutr… ▽ More In the era of precision measurements of the neutrino oscillation parameters, upcoming neutrino experiments will also be sensitive to physics beyond the Standard Model. KM3NeT/ORCA is a neutrino detector optimised for measuring atmospheric neutrinos from a few GeV to around 100 GeV. In this paper, the sensitivity of the KM3NeT/ORCA detector to neutrino decay has been explored. A three-flavour neutrino oscillation scenario, where the third neutrino mass state $ν_3$ decays into an invisible state, e.g. a sterile neutrino, is considered. We find that KM3NeT/ORCA would be sensitive to invisible neutrino decays with $1/α_3=τ_3/m_3 < 180$~$\mathrm{ps/eV}$ at $90\%$ confidence level, assuming true normal ordering. Finally, the impact of neutrino decay on the precision of KM3NeT/ORCA measurements for $θ_{23}$, $Δm^2_{31}$ and mass ordering have been studied. No significant effect of neutrino decay on the sensitivity to these measurements has been found. △ Less

Submitted 27 March, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Comments: 27 pages, 14 figures, bibliography updated, typos corrected

Rapid Reconstruction of 3-D Membrane Pore Structure Using a Single 2-D Micrograph

Authors: Hooman Chamani, Arash Rabbani, Kaitlyn P. Russell, Andrew L. Zydney, Enrique D. Gomez, Jason Hattrick-Simpers, Jay R. Werber

Abstract: Conventional 2-D scanning electron microscopy (SEM) is commonly used to rapidly and qualitatively evaluate membrane pore structure. Quantitative 2-D analyses of pore sizes can be extracted from SEM, but without information about 3-D spatial arrangement and connectivity, which are crucial to the understanding of membrane pore structure. Meanwhile, experimental 3-D reconstruction via tomography is c… ▽ More Conventional 2-D scanning electron microscopy (SEM) is commonly used to rapidly and qualitatively evaluate membrane pore structure. Quantitative 2-D analyses of pore sizes can be extracted from SEM, but without information about 3-D spatial arrangement and connectivity, which are crucial to the understanding of membrane pore structure. Meanwhile, experimental 3-D reconstruction via tomography is complex, expensive, and not easily accessible. Here, we employ data-science tools to demonstrate a proof-of-principle reconstruction of the 3-D structure of a membrane using a single 2-D image pulled from a 3-D tomographic data set. The reconstructed and experimental 3-D structures were then directly compared, with important properties such as mean pore radius, mean throat radius, coordination number and tortuosity differing by less than 15%. The developed algorithm will dramatically improve the ability of the membrane community to characterize membranes, accelerating the design and synthesis of membranes with desired structural and transport properties. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Comments: 36 pages including Supplementary Materials, 15 Figures and 2 Tables

Assessing the Impact of Music Recommendation Diversity on Listeners: A Longitudinal Study

Authors: Lorenzo Porcaro, Emilia Gómez, Carlos Castillo

Abstract: We present the results of a 12-week longitudinal user study wherein the participants, 110 subjects from Southern Europe, received on a daily basis Electronic Music (EM) diversified recommendations. By analyzing their explicit and implicit feedback, we show that exposure to specific levels of music recommendation diversity may be responsible for long-term impacts on listeners' attitudes. In particu… ▽ More We present the results of a 12-week longitudinal user study wherein the participants, 110 subjects from Southern Europe, received on a daily basis Electronic Music (EM) diversified recommendations. By analyzing their explicit and implicit feedback, we show that exposure to specific levels of music recommendation diversity may be responsible for long-term impacts on listeners' attitudes. In particular, we highlight the function of diversity in increasing the openness in listening to EM, a music genre not particularly known or liked by the participants previous to their participation in the study. Moreover, we demonstrate that recommendations may help listeners in removing positive and negative attachments towards EM, deconstructing pre-existing implicit associations but also stereotypes associated with this music. In addition, our results show the significant clout that recommendation diversity has in generating curiosity in listeners. △ Less

Submitted 1 December, 2022; originally announced December 2022.

Liability regimes in the age of AI: a use-case driven analysis of the burden of proof

Authors: David Fernández Llorca, Vicky Charisi, Ronan Hamon, Ignacio Sánchez, Emilia Gómez

Abstract: New emerging technologies powered by Artificial Intelligence (AI) have the potential to disruptively transform our societies for the better. In particular, data-driven learning approaches (i.e., Machine Learning (ML)) have been a true revolution in the advancement of multiple technologies in various application domains. But at the same time there is growing concern about certain intrinsic characte… ▽ More New emerging technologies powered by Artificial Intelligence (AI) have the potential to disruptively transform our societies for the better. In particular, data-driven learning approaches (i.e., Machine Learning (ML)) have been a true revolution in the advancement of multiple technologies in various application domains. But at the same time there is growing concern about certain intrinsic characteristics of these methodologies that carry potential risks to both safety and fundamental rights. Although there are mechanisms in the adoption process to minimize these risks (e.g., safety regulations), these do not exclude the possibility of harm occurring, and if this happens, victims should be able to seek compensation. Liability regimes will therefore play a key role in ensuring basic protection for victims using or interacting with these systems. However, the same characteristics that make AI systems inherently risky, such as lack of causality, opacity, unpredictability or their self and continuous learning capabilities, may lead to considerable difficulties when it comes to proving causation. This paper presents three case studies, as well as the methodology to reach them, that illustrate these difficulties. Specifically, we address the cases of cleaning robots, delivery drones and robots in education. The outcome of the proposed analysis suggests the need to revise liability regimes to alleviate the burden of proof on victims in cases involving AI technologies. △ Less

Submitted 17 March, 2023; v1 submitted 3 November, 2022; originally announced November 2022.

Comments: Paper published at the Journal of Artificial Intelligence Research

Journal ref: Journal of Artificial Intelligence Research, Vol. 76 (2023), pp. 613-644

Algebra of N-event synchronization

Authors: Ernesto Gomez, Keith E. Schubert, Khalil Dajani

Abstract: We have previously defined synchronization (Gomez, E. and K. Schubert 2011) as a relation between the times at which a pair of events can happen, and introduced an algebra that covers all possible relations for such pairs. In this work we introduce the synchronization matrix, to make it easier to calculate the properties and results of $N$ event synchronizations, such as are commonly encountered i… ▽ More We have previously defined synchronization (Gomez, E. and K. Schubert 2011) as a relation between the times at which a pair of events can happen, and introduced an algebra that covers all possible relations for such pairs. In this work we introduce the synchronization matrix, to make it easier to calculate the properties and results of $N$ event synchronizations, such as are commonly encountered in parallel execution of multiple processes. The synchronization matrix leads to the definition of N-event synchronization algebras as specific extensions to the original algebra. We derive general properties of such synchronization, and we are able to analyze effects of synchronization on the phase space of parallel execution introduced in (Gomez E Kai R, Schubert KE 2017) △ Less

Submitted 1 November, 2022; originally announced November 2022.

Comments: 9 pages, 2 figures

ACM Class: B.4.3; D.3.1; D.3.2; D.3.3

Documenting use cases in the affective computing domain using Unified Modeling Language

Authors: Isabelle Hupont, Emilia Gomez

Abstract: The study of the ethical impact of AI and the design of trustworthy systems needs the analysis of the scenarios where AI systems are used, which is related to the software engineering concept of "use case" and the "intended purpose" legal term. However, there is no standard methodology for use case documentation covering the context of use, scope, functional requirements and risks of an AI system.… ▽ More The study of the ethical impact of AI and the design of trustworthy systems needs the analysis of the scenarios where AI systems are used, which is related to the software engineering concept of "use case" and the "intended purpose" legal term. However, there is no standard methodology for use case documentation covering the context of use, scope, functional requirements and risks of an AI system. In this work, we propose a novel documentation methodology for AI use cases, with a special focus on the affective computing domain. Our approach builds upon an assessment of use case information needs documented in the research literature and the recently proposed European regulatory framework for AI. From this assessment, we adopt and adapt the Unified Modeling Language (UML), which has been used in the last two decades mostly by software engineers. Each use case is then represented by an UML diagram and a structured table, and we provide a set of examples illustrating its application to several affective computing scenarios. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Comments: 8 pages, 5 figures, 2 tables

Guidelines to Develop Trustworthy Conversational Agents for Children

Authors: Marina Escobar-Planas, Emilia Gómez, Carlos-D Martínez-Hinarejos

Abstract: Conversational agents (CAs) embodied in speakers or chatbots are becoming very popular in some countries, and despite their adult-centred design, they have become part of children's lives, generating a need for children-centric trustworthy systems. This paper presents a literature review to identify the main opportunities, challenges and risks brought by CAs when used by children. We then consider… ▽ More Conversational agents (CAs) embodied in speakers or chatbots are becoming very popular in some countries, and despite their adult-centred design, they have become part of children's lives, generating a need for children-centric trustworthy systems. This paper presents a literature review to identify the main opportunities, challenges and risks brought by CAs when used by children. We then consider relevant ethical guidelines for AI and adapt them to this particular system and population, using a Delphi methodology with a set of experts from different disciplines. From this analysis, we propose specific guidelines to help CAs developers improve their design towards trustworthiness and children. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: 19 pages

Utilizing a global network of telescopes to update the ephemeris for the highly eccentric planet HD 80606 b and to ensure the efficient scheduling of JWST

Authors: Kyle A. Pearson, Chas Beichman, Benjamin J. Fulton, Thomas M. Esposito, Robert T. Zellem, David R. Ciardi, Jonah Rolfness, John Engelke, Tamim Fatahi, Rachel Zimmerman-Brachman, Arin Avsar, Dr. Varun Bhalerao, Pat Boyce, Marc Bretton, Alexandra D. Burnett, Jennifer Burt, Martin Fowler, Daniel Gallego, Edward Gomez, Bruno Guillet, Jerry Hilburn, Yves Jongen, Tiffany Kataria, Anastasia Kokori, Harsh Kumar , et al. (15 additional authors not shown)

Abstract: The transiting planet HD80606b undergoes a 1000-fold increase in insolation during its 111-day orbit due to it being highly eccentric (e=0.93). The planet's effective temperature increases from 400K to over 1400K in a few hours as it makes a rapid passage to within 0.03AU of its host star during periapsis. Spectroscopic observations during the eclipse (which is conveniently oriented a few hours be… ▽ More The transiting planet HD80606b undergoes a 1000-fold increase in insolation during its 111-day orbit due to it being highly eccentric (e=0.93). The planet's effective temperature increases from 400K to over 1400K in a few hours as it makes a rapid passage to within 0.03AU of its host star during periapsis. Spectroscopic observations during the eclipse (which is conveniently oriented a few hours before periapsis) of HD80606b with the James Webb Space Telescope (JWST) are poised to exploit this highly variable environment to study a wide variety of atmospheric properties, including composition, chemical and dynamical timescales, and large scale atmospheric motions. Critical to planning and interpreting these observations is an accurate knowledge of the planet's orbit. We report on observations of two full-transit events: 7 February 2020 as observed by the TESS spacecraft and 7--8 December 2021 as observed with a worldwide network of small telescopes. We also report new radial velocity observations which when analyzed with a coupled model to the transits greatly improve the planet's orbital ephemeris. Our new orbit solution reduces the uncertainty in the transit and eclipse timing of the JWST era from tens of minutes to a few minutes. When combined with the planned JWST observations, this new precision may be adequate to look for non-Keplerian effects in the orbit of HD80606b. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: Accepted for publication in AJ; in press

SPIM-Flow, an integrated light-sheet and microfluidics platform for hydrodynamic studies of Hydra

Authors: Per Niklas Hedde, Erika L. Gomez, Leora Duong, Robert E. Steele, Siavash Ahrar

Abstract: Selective plane illumination microscopy (SPIM), or light sheet, is a powerful three-dimensional imaging approach. However, access to and interfacing microscopes with microfluidics have remained challenging. Complex interfacing with microfluidics has limited the SPIM's utility in studying the hydrodynamics of freely moving multicellular organisms. We developed SPIM-Flow, an inexpensive light sheet… ▽ More Selective plane illumination microscopy (SPIM), or light sheet, is a powerful three-dimensional imaging approach. However, access to and interfacing microscopes with microfluidics have remained challenging. Complex interfacing with microfluidics has limited the SPIM's utility in studying the hydrodynamics of freely moving multicellular organisms. We developed SPIM-Flow, an inexpensive light sheet platform that enables easy integration with microfluidics. We used SPIM-Flow to study the hydrodynamics of freely moving Hydra polyps in millimeter-sized chambers (4 mm wide, 1.5 mm height). Our initial experiments across multiple animals, feeding on a chip (Artemia franciscana nauplius used as food), and baseline behaviors (eg., tentacle swaying, elongation, and bending) indicated animals' health inside the system. SPIM enabled easy imaging of the freely moving animal and tracer beads (for fluid visualizations) inside the larger chambers. Next, using the chambers, we investigated Hydra's response to flow. Results suggest that animals responded to established flow by bending and swaying their tentacles in the flow direction. Finally, we used a previously described video analysis software (FlowTrace) to visualize path lines generated by (e.g., vortex generated) and around (e.g., due to flow) Hydra. These results demonstrated the SPIM-Flow's utility to study the hydrodynamics of freely moving animals. △ Less

Submitted 30 August, 2022; originally announced August 2022.

Comments: 16 pages, 5 figures, 5 supplementary figures, 5 supplementary videos

A LOOK at Outbursts of Comet C/2014 UN$_{271}$ (Bernardinelli-Bernstein) Near 20 au

Authors: Michael S. P. Kelley, Rosita Kokotanekova, Carrie E. Holt, Silvia Protopapa, Dennis Bodewits, Matthew M. Knight, Tim Lister, Helen Usher, Joseph Chatelain, Edward Gomez, Sarah Greenstreet, Tony Angel, Ben Wooding

Abstract: Cometary activity may be driven by ices with very low sublimation temperatures, such as carbon monoxide ice, which can sublimate at distances well beyond 20 au. This point is emphasized by the discovery of Oort cloud comet C/2014 UN$_{271}$ (Bernardinelli-Bernstein), and its observed activity out to $\sim$26 au. Through observations of this comet's optical brightness and behavior, we can potential… ▽ More Cometary activity may be driven by ices with very low sublimation temperatures, such as carbon monoxide ice, which can sublimate at distances well beyond 20 au. This point is emphasized by the discovery of Oort cloud comet C/2014 UN$_{271}$ (Bernardinelli-Bernstein), and its observed activity out to $\sim$26 au. Through observations of this comet's optical brightness and behavior, we can potentially discern the drivers of activity in the outer solar system. We present a study of the activity of comet Bernardinelli-Bernstein with broad-band optical photometry taken at 19-20 au from the Sun (2021 June to 2022 February) as part of the LCO Outbursting Objects Key (LOOK) Project. Our analysis shows that the comet's optical brightness during this period was initially dominated by cometary outbursts, stochastic events that ejected $\sim10^7$ to $\sim10^8$ kg of material on short (< 1 day) timescales. We present evidence for three such outbursts occurring in 2021 June and September. The nominal nuclear volumes excavated by these events are similar to the 10-100 m pit-shaped voids on the surfaces of short-period comet nuclei, as imaged by spacecraft. Two out of three Oort cloud comets observed at large pre-perihelion distances exhibit outburst behavior near 20 au, suggesting such events may be common in this population. In addition, quiescent CO-driven activity may account for the brightness of the comet in 2022 January to February, but that variations in the cometary active area (i.e., the amount of sublimating ice) with heliocentric distance are also possible. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Comments: Accepted for publication in The Astrophysical Journal Letters 13 pages, 6 figures, 1 table

The LCO Outbursting Objects Key Project: Overview and Year 1 Status

Authors: Tim Lister, Michael S. P. Kelley, Carrie E. Holt, Henry H. Hsieh, Michele T. Bannister, Aayushi A. Verma, Matthew M. Dobson, Matthew M. Knight, Youssef Moulane, Megan E. Schwamb, Dennis Bodewits, James Bauer, Joseph Chatelain, Estela Fernández-Valenzuela, Daniel Gardener, Geza Gyuk, Mark Hammergren, Ky Huynh, Emmanuel Jehin, Rosita Kokotanekova, Eva Lilly, Man-To Hui, Adam McKay, Cyrielle Opitom, Silvia Protopapa , et al. (10 additional authors not shown)

Abstract: The LCO Outbursting Objects Key (LOOK) Project uses the telescopes of the Las Cumbres Observatory (LCO) Network to: (1) to systematically monitor a sample of Dynamically New Comets over the whole sky, and (2) use alerts from existing sky surveys to rapidly respond to and characterize detected outburst activity in all small bodies. The data gathered on outbursts helps to characterize each outburst'… ▽ More The LCO Outbursting Objects Key (LOOK) Project uses the telescopes of the Las Cumbres Observatory (LCO) Network to: (1) to systematically monitor a sample of Dynamically New Comets over the whole sky, and (2) use alerts from existing sky surveys to rapidly respond to and characterize detected outburst activity in all small bodies. The data gathered on outbursts helps to characterize each outburst's evolution with time, assess the frequency and magnitude distribution of outbursts in general, and contributes to the understanding of outburst processes and volatile distribution in the Solar System. The LOOK Project exploits the synergy between current and future wide-field surveys such as ZTF, PanSTARRS, and LSST as well as rapid-response telescope networks such as LCO, and serves as an excellent testbed for what will be needed the much larger number of objects coming from Rubin Observatory. We will describe the LOOK Project goals, the planning and target selection (including the use of NEOexchange as a Target and Observation Manager or "TOM"), and results from the first phase of observations, including the detection of activity and outbursts on the giant comet C/2014 UN271 (Bernardinelli-Bernstein) and the discovery and follow-up of outbursts on comets. Within these outburst discoveries, we present a high cadence of 7P/Pons-Winnecke with days, a large outburst on 57P/duToit-Neujmin-Delporte, and evidence that comet P/2020 X1 (ATLAS) was in outburst when discovered. △ Less

Submitted 17 June, 2022; originally announced June 2022.

Comments: 35 pages, 11 figures, accepted for publication in PSJ

Federated Data Analytics: A Study on Linear Models

Authors: Xubo Yue, Raed Al Kontar, Ana María Estrada Gómez

Abstract: As edge devices become increasingly powerful, data analytics are gradually moving from a centralized to a decentralized regime where edge compute resources are exploited to process more of the data locally. This regime of analytics is coined as federated data analytics (FDA). In spite of the recent success stories of FDA, most literature focuses exclusively on deep neural networks. In this work, w… ▽ More As edge devices become increasingly powerful, data analytics are gradually moving from a centralized to a decentralized regime where edge compute resources are exploited to process more of the data locally. This regime of analytics is coined as federated data analytics (FDA). In spite of the recent success stories of FDA, most literature focuses exclusively on deep neural networks. In this work, we take a step back to develop an FDA treatment for one of the most fundamental statistical models: linear regression. Our treatment is built upon hierarchical modeling that allows borrowing strength across multiple groups. To this end, we propose two federated hierarchical model structures that provide a shared representation across devices to facilitate information sharing. Notably, our proposed frameworks are capable of providing uncertainty quantification, variable selection, hypothesis testing and fast adaptation to new unseen data. We validate our methods on a range of real-life applications including condition monitoring for aircraft engines. The results show that our FDA treatment for linear models can serve as a competing benchmark model for future development of federated algorithms. △ Less

Submitted 15 June, 2022; originally announced June 2022.

Journal ref: IISE Transactions, 2023