-
A feasibility study of using X-ray Thomson Scattering to diagnose the in-flight plasma conditions of DT cryogenic implosions
Authors:
H. Poole,
D. Cao,
R. Epstein,
I. Golovkin,
T. Walton,
S. X. Hu,
M. Kasim,
S. M. Vinko,
J. R. Rygg,
V. N. Goncharov,
G. Gregori,
S. P. Regan
Abstract:
The design of inertial confinement fusion (ICF) ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models are required via experimentation. A feasibility study of using spatially-integrated, spectrally-resolved, X-ray Thomson scattering (XRTS) measurement…
▽ More
The design of inertial confinement fusion (ICF) ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models are required via experimentation. A feasibility study of using spatially-integrated, spectrally-resolved, X-ray Thomson scattering (XRTS) measurements to diagnose the temperature, density, and ionization of the compressed DT shell and hot spot of a laser direct-drive implosion at two-thirds convergence was conducted. Synthetic scattering spectra were generated using 1-D implosion simulations from the LILAC code that were post processed with the X-ray Scattering (XRS) model which is incorporated within SPECT3D. Analysis of two extreme adiabat capsule conditions showed that the plasma conditions for both compressed DT shells could be resolved.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Comment on "Large enhancement in high-energy photoionization of Fe XVII and missing continuum plasma opacity"
Authors:
C. Blancard,
J. Colgan,
Ph. Cossé,
G. Faussurier,
C. J. Fontes,
F. Gilleron,
I. Golovkin,
S. B. Hansen,
C. A. Iglesias,
D. P. Kilcrease,
J. J. MacFarlane,
R. M. More,
J. -C. Pain,
M. Sherrill,
B. G. Wilson
Abstract:
Recent R-matrix calculations claim to produce a significant enhancement in the opacity of Fe XVII due to atomic core excitations [S. N. Nahar & A.K. Pradhan, Phys. Rev. Letters 116, 235003 (2016), arXiv:1606.02731] and assert that this enhancement is consistent with recent measurements of higher-than-predicted iron opacities [J. E. Bailey et al., Nature 517, 56 (2015)]. This comment shows that the…
▽ More
Recent R-matrix calculations claim to produce a significant enhancement in the opacity of Fe XVII due to atomic core excitations [S. N. Nahar & A.K. Pradhan, Phys. Rev. Letters 116, 235003 (2016), arXiv:1606.02731] and assert that this enhancement is consistent with recent measurements of higher-than-predicted iron opacities [J. E. Bailey et al., Nature 517, 56 (2015)]. This comment shows that the standard opacity models which have already been directly compared with experimental data produce photon absorption cross-sections for Fe XVII that are effectively equivalent to (and in fact larger than) the new R-matrix opacities. Thus, the new R-matrix results cannot be expected to significantly impact the existing discrepancies between theory and experiment because they produce neither a "large enhancement" nor account for "missing continuum plasma opacity" relative to standard models.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Control and diagnosis of temperature, density, and uniformity in x-ray heated iron/magnesium samples for opacity measurements
Authors:
T. Nagayama,
J. E. Bailey,
G. Loisel,
S. B. Hansen,
G. A. Rochau,
R. C. Mancini,
J. J. MacFarlane,
I. Golovkin
Abstract:
Experimental tests are in progress to evaluate the accuracy of the modeled iron opacity at solar interior conditions, in particular to better constrain the solar abundance problem [S. Basu and H.M. Antia, Physics Reports 457, 217 (2008)]. Here we describe measurements addressing three of the key requirements for reliable opacity experiments: control of sample conditions, independent sample conditi…
▽ More
Experimental tests are in progress to evaluate the accuracy of the modeled iron opacity at solar interior conditions, in particular to better constrain the solar abundance problem [S. Basu and H.M. Antia, Physics Reports 457, 217 (2008)]. Here we describe measurements addressing three of the key requirements for reliable opacity experiments: control of sample conditions, independent sample condition diagnostics, and verification of sample condition uniformity. The opacity samples consist of iron/magnesium layers tamped by plastic. By changing the plastic thicknesses, we have controlled the iron plasma conditions to reach i) Te=167+/-3 eV and ne=(7.1+/-1.5)e21 e/cc, ii) Te=170+/-2 eV and ne=(2.0+/-0.2)e22 e/cc, and iii) Te=196+/-6 eV and ne=(3.8+/-0.8)e22 e/cc, which were measured by magnesium tracer K-shell spectroscopy. The opacity sample non-uniformity was directly measured by a separate experiment where Al is mixed into the side of the sample facing the radiation source and Mg into the other side. The iron condition was confirmed to be uniform within their measurement uncertainties by Al and Mg K-shell spectroscopy. The conditions are suitable for testing opacity calculations needed for modeling the solar interior, other stars, and high energy density plasmas.
△ Less
Submitted 15 May, 2014;
originally announced May 2014.
-
One-dimensional radiation-hydrodynamic simulations of imploding spherical plasma liners with detailed equation-of-state modeling
Authors:
J. S. Davis,
S. C. Hsu,
I. E. Golovkin,
J. J. MacFarlane,
J. T. Cassibry
Abstract:
This work extends the one-dimensional radiation-hydrodynamic imploding spherical argon plasma liner simulations of T. J. Awe et al. [Phys. Plasmas 18, 072705 (2011)] by using a detailed tabular equation-of-state (EOS) model, whereas Awe et al. used a polytropic EOS model. Results using the tabular EOS model give lower stagnation pressures by a factor of 3.9-8.6 and lower peak ion temperatures comp…
▽ More
This work extends the one-dimensional radiation-hydrodynamic imploding spherical argon plasma liner simulations of T. J. Awe et al. [Phys. Plasmas 18, 072705 (2011)] by using a detailed tabular equation-of-state (EOS) model, whereas Awe et al. used a polytropic EOS model. Results using the tabular EOS model give lower stagnation pressures by a factor of 3.9-8.6 and lower peak ion temperatures compared to the polytropic EOS results. Both local thermodynamic equilibrium (LTE) and non-LTE EOS models were used in this work, giving similar results on stagnation pressure. The lower stagnation pressures using a tabular EOS model are attributed to a reduction in the liner's ability to compress arising from the energy sink introduced by ionization and electron excitation, which are not accounted for in a polytropic EOS model. Variation of the plasma liner species for the same initial liner geometry, mass density, and velocity was also explored using the LTE tabular EOS model, showing that the highest stagnation pressure is achieved with the highest atomic mass species for the constraints imposed.
△ Less
Submitted 25 September, 2012; v1 submitted 25 July, 2012;
originally announced July 2012.
-
Short-N characteristic radiative transfer method in 2D cylindrical RZ coordinates
Authors:
Nicolas A. Pereyra,
Joseph J. MacFarlane,
Pamela R. Woodruff,
Igor E. Golovkin,
** Wang
Abstract:
We present a new radiative transfer method Short-N Characteristics that is a hybrid between the standard long characteristic methods and the standard short characteristic methods. We have implemented the numerical method within the SPECT3D imaging and spectral analysis application. Numerical experiments have shown that the short-N method is capable of reproducing the accuracy of the long charact…
▽ More
We present a new radiative transfer method Short-N Characteristics that is a hybrid between the standard long characteristic methods and the standard short characteristic methods. We have implemented the numerical method within the SPECT3D imaging and spectral analysis application. Numerical experiments have shown that the short-N method is capable of reproducing the accuracy of the long characteristic methods, while delivering the CPU time efficiency of the short characteristic methods. We apply the short-N method to 2.5D cylindrical coordinates, i.e., we assume a 3D problem under azimuthal symmetry leading to a 2D mathematical problem with r-z as the independent spatial coordinates (2DRZ). We are currently working to extend this new method to other geometries.
△ Less
Submitted 12 March, 2007;
originally announced March 2007.
-
Hot dense capsule implosion cores produced by z-pinch dynamic hohlraum radiation
Authors:
J. E. Bailey,
G. A. Chandler,
S. A. Slutz,
I. Golovkin,
P. W. Lake,
J. J. MacFarlane,
R. C. Mancini,
T. J. Buris-Mog,
G. Cooper,
R. J. Leeper,
T. A. Mehlhorn,
T. C. Moore,
T. J. Nash,
D. S. Nielsen,
C. L. Ruiz,
D. G. Schroen,
W. A. Varnum
Abstract:
Hot dense capsule implosions driven by z-pinch x-rays have been measured for the first time. A ~220 eV dynamic hohlraum imploded 1.7-2.1 mm diameter gas-filled CH capsules which absorbed up to ~20 kJ of x-rays. Argon tracer atom spectra were used to measure the Te~ 1keV electron temperature and the ne ~ 1-4 x10^23 cm-3 electron density. Spectra from multiple directions provide core symmetry esti…
▽ More
Hot dense capsule implosions driven by z-pinch x-rays have been measured for the first time. A ~220 eV dynamic hohlraum imploded 1.7-2.1 mm diameter gas-filled CH capsules which absorbed up to ~20 kJ of x-rays. Argon tracer atom spectra were used to measure the Te~ 1keV electron temperature and the ne ~ 1-4 x10^23 cm-3 electron density. Spectra from multiple directions provide core symmetry estimates. Computer simulations agree well with the peak compression values of Te, ne, and symmetry, indicating reasonable understanding of the hohlraum and implosion physics.
△ Less
Submitted 4 June, 2003;
originally announced June 2003.
