-
Hollow Rectangular Waveguide-fed Holographic Beamforming Antenna Additively Manufactured (3D Printed) with Conductive Polymer
Authors:
Insang Yoo,
Jonah Gollub,
Shengrong Ye,
Allen Gray,
Okan Yurduseven,
Manohar D. Deshpande,
David R. Smith
Abstract:
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verificatio…
▽ More
We present the design and fabrication of 3D printed holographic beamforming antennas. The antennas utilize additively manufactured hollow rectangular waveguides that feed radiating rectilinear slots inserted into the upper conducting wall. The lengths of the individual slots are altered to implement a holographic beamforming solution designed using a coupled dipole formalism. For rapid verification, the designed antennas are fabricated using a desktop dual-extrusion fused filament 3D printer. The body of each antenna and its inner conducting surface are respectively printed using polylactic acid and biodegradable conductive polyester composite material (i.e., Electrifi), which is later deposited with a layer of copper on its surface to improve surface conductivity and reduce surface roughness. The beamforming performance of the fabricated antennas is confirmed via experiments. The 3D printed metasurface antennas using the proposed fabrication technique illustrate emerging capabilities in the rapid prototy** of complex electromagnetic structures.
△ Less
Submitted 30 August, 2022;
originally announced August 2022.
-
The Medical Segmentation Decathlon
Authors:
Michela Antonelli,
Annika Reinke,
Spyridon Bakas,
Keyvan Farahani,
AnnetteKopp-Schneider,
Bennett A. Landman,
Geert Litjens,
Bjoern Menze,
Olaf Ronneberger,
Ronald M. Summers,
Bram van Ginneken,
Michel Bilello,
Patrick Bilic,
Patrick F. Christ,
Richard K. G. Do,
Marc J. Gollub,
Stephan H. Heckers,
Henkjan Huisman,
William R. Jarnagin,
Maureen K. McHugo,
Sandy Napel,
Jennifer S. Goli Pernicka,
Kawal Rhode,
Catalina Tobon-Gomez,
Eugene Vorontsov
, et al. (34 additional authors not shown)
Abstract:
International challenges have become the de facto standard for comparative assessment of image analysis algorithms given a specific task. Segmentation is so far the most widely investigated medical image processing task, but the various segmentation challenges have typically been organized in isolation, such that algorithm development was driven by the need to tackle a single specific clinical pro…
▽ More
International challenges have become the de facto standard for comparative assessment of image analysis algorithms given a specific task. Segmentation is so far the most widely investigated medical image processing task, but the various segmentation challenges have typically been organized in isolation, such that algorithm development was driven by the need to tackle a single specific clinical problem. We hypothesized that a method capable of performing well on multiple tasks will generalize well to a previously unseen task and potentially outperform a custom-designed solution. To investigate the hypothesis, we organized the Medical Segmentation Decathlon (MSD) - a biomedical image analysis challenge, in which algorithms compete in a multitude of both tasks and modalities. The underlying data set was designed to explore the axis of difficulties typically encountered when dealing with medical images, such as small data sets, unbalanced labels, multi-site data and small objects. The MSD challenge confirmed that algorithms with a consistent good performance on a set of tasks preserved their good average performance on a different set of previously unseen tasks. Moreover, by monitoring the MSD winner for two years, we found that this algorithm continued generalizing well to a wide range of other clinical problems, further confirming our hypothesis. Three main conclusions can be drawn from this study: (1) state-of-the-art image segmentation algorithms are mature, accurate, and generalize well when retrained on unseen tasks; (2) consistent algorithmic performance across multiple tasks is a strong surrogate of algorithmic generalizability; (3) the training of accurate AI segmentation models is now commoditized to non AI experts.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Electronically Steered Nyquist Metasurface Antenna
Authors:
Michael Boyarsky,
Timothy Sleasman,
Mohammadreza F. Imani,
Jonah N. Gollub,
David R. Smith
Abstract:
Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight cir…
▽ More
Mobile devices, climate science, and autonomous vehicles all require advanced microwave antennas for imaging, radar, and wireless communications. The cost, size, and power consumption of existing technology, however, has hindered the ubiquity of electronically steered systems. Here, we propose a metasurface antenna design paradigm that enables electronic beamsteering from a passive lightweight circuit board with varactor-tuned elements. Distinct from previous metasurfaces (which require dense element spacing), the proposed design uses Nyquist spatial sampling of half a wavelength. We detail the design of this Nyquist metasurface antenna and experimentally validate its ability to electronically steer in two directions. Nyquist metasurface antennas can realize high performance without costly and power hungry phase shifters, making them a compelling technology for future antenna hardware.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
Computational polarimetric microwave imaging
Authors:
Thomas Fromenteze,
Okan Yurduseven,
Michael Boyarsky,
Jonah Gollub,
Daniel L. Marks,
David R. Smith
Abstract:
We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architec…
▽ More
We propose a polarimetric microwave imaging technique that exploits recent advances in computational imaging. We utilize a frequency-diverse cavity-backed metasurface, allowing us to demonstrate high-resolution polarimetric imaging using a single transceiver and frequency sweep over the operational microwave bandwidth. The frequency-diverse metasurface imager greatly simplifies the system architecture compared with active arrays and other conventional microwave imaging approaches. We further develop the theoretical framework for computational polarimetric imaging and validate the approach experimentally using a multi-modal leaky cavity. The scalar approximation for the interaction between the radiated waves and the target---often applied in microwave computational imaging schemes---is thus extended to retrieve the susceptibility tensors, and hence providing additional information about the targets. Computational polarimetry has relevance for existing systems in the field that extract polarimetric imagery, and particular for ground observation. A growing number of short-range microwave imaging applications can also notably benefit from computational polarimetry, particularly for imaging objects that are difficult to reconstruct when assuming scalar estimations.
△ Less
Submitted 4 October, 2017; v1 submitted 16 August, 2017;
originally announced August 2017.
-
Single-Frequency Microwave Imaging with Dynamic Metasurface Apertures
Authors:
Timothy Sleasman,
Michael Boyarsky,
Mohammadreza F. Imani,
Thomas Fromenteze,
Jonah N. Gollub,
David R. Smith
Abstract:
Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying…
▽ More
Conventional microwave imaging schemes, enabled by the ubiquity of coherent sources and detectors, have traditionally relied on frequency bandwidth to retrieve range information, while using mechanical or electronic beamsteering to obtain cross-range information. This approach has resulted in complex and expensive hardware when extended to large-scale systems requiring ultrawide bandwidth. Relying on bandwidth can create difficulties in calibration, alignment, and imaging of dispersive objects. We present an alternative approach using an electrically-large, dynamically reconfigurable, metasurface antenna that generates spatially-distinct radiation patterns as a function of tuning state. The metasurface antenna comprises a waveguide feeding an array of metamaterial radiators, each of whose properties can be modified by applying a voltage to a diode integrated into the element. By deploying two of these apertures, one as the transmitter and one as the receiver, we realize sufficient spatial diversity to alleviate the dependence on frequency bandwidth and obtain both range and cross-range information using measurements at a single frequency. We demonstrate the method experimentally, using one-dimensional dynamic metasurface apertures and reconstructing various two-dimensional scenes (range and cross-range). Furthermore, we modify a conventional microwave imaging technique---the range migration algorithm---to be compatible with such configurations, resulting in an imaging system that is fast and simple in both software and hardware. The imaging scheme presented in this paper has broad application to radio frequency imaging, including security screening, through-wall imaging, biomedical diagnostics, and synthetic aperture radar.
△ Less
Submitted 7 August, 2017; v1 submitted 27 March, 2017;
originally announced April 2017.
-
Computational Microwave Imaging Using 3D Printed Conductive Polymer Frequency-Diverse Metasurface Antennas
Authors:
Okan Yurduseven,
Patrick Flowers,
Shengrong Ye,
Daniel Marks,
Jonah Gollub,
Thomas Fromenteze,
Benjamin Wiley,
David Smith
Abstract:
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid (PLA) polymer material and conductive polymer material (Electrifi), circumventing the requirement for expensive and time-consuming conventional fabrication tech…
▽ More
A frequency-diverse computational imaging system synthesized using three-dimensional (3D) printed frequency-diverse metasurface antennas is demonstrated. The 3D fabrication of the antennas is achieved using a combination of PolyLactic Acid (PLA) polymer material and conductive polymer material (Electrifi), circumventing the requirement for expensive and time-consuming conventional fabrication techniques, such as machine milling, photolithography and laser-etching. Using the 3D printed frequency- diverse metasurface antennas, a composite aperture is designed and simulated for imaging in the K-band frequency regime (17.5-26.5 GHz). The frequency-diverse system is capable of imaging by means of a simple frequency-sweep in an-all electronic manner, avoiding mechanical scanning and active circuit components. Using the synthesized system, microwave imaging of objects is achieved at the diffraction limit. It is also demonstrated that the conductivity of the Electrifi polymer material significantly affects the performance of the 3D printed antennas and therefore is a critical factor governing the fidelity of the reconstructed images.
△ Less
Submitted 6 April, 2017;
originally announced April 2017.
-
Phaseless computational imaging with a radiating metasurface
Authors:
Thomas Fromenteze,
Xiaojun Liu,
Michael Boyarsky,
Jonah Gollub,
David R. Smith
Abstract:
Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized pseudo-orthogonal radiation patterns to illuminate an object of interest---notably, frequency-diverse metasurfaces have been exploited as fast and low-cost alternative t…
▽ More
Computational imaging modalities support a simplification of the active architectures required in an imaging system and these approaches have been validated across the electromagnetic spectrum. Recent implementations have utilized pseudo-orthogonal radiation patterns to illuminate an object of interest---notably, frequency-diverse metasurfaces have been exploited as fast and low-cost alternative to conventional coherent imaging systems. However, accurately measuring the complex-valued signals in the frequency domain can be burdensome, particularly for sub-centimeter wavelengths. Here, computational imaging is studied under the relaxed constraint of intensity-only measurements. A novel 3D imaging system is conceived based on 'phaseless' and compressed measurements, with benefits from recent advances in the field of phase retrieval. In this paper, the methodology associated with this novel principle is described, studied, and experimentally demonstrated in the microwave range. A comparison of the estimated images from both complex valued and phaseless measurements are presented, verifying the fidelity of phaseless computational imaging.
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
Flagellar Kinematics and Swimming of Algal Cells in Viscoelastic Fluids
Authors:
Boyang Qin,
Arvind Gopinath,
**g Yang,
Jerry P Gollub,
Paulo E Arratia
Abstract:
The motility of microorganisms is influenced greatly by their hydrodynamic interactions with the fluidic environment they inhabit. We show by direct experimental observation of the bi-flagellated alga Chlamydomonas reinhardtii that fluid elasticity and viscosity strongly influence the beating pattern - the gait - and thereby control the propulsion speed. The beating frequency and the wave speed ch…
▽ More
The motility of microorganisms is influenced greatly by their hydrodynamic interactions with the fluidic environment they inhabit. We show by direct experimental observation of the bi-flagellated alga Chlamydomonas reinhardtii that fluid elasticity and viscosity strongly influence the beating pattern - the gait - and thereby control the propulsion speed. The beating frequency and the wave speed characterizing the cyclical bending are both enhanced by fluid elasticity. Despite these enhancements, the net swimming speed of the alga is hindered for fluids that are sufficiently elastic. The origin of this complex response lies in the interplay between the elasticity-induced changes in the spatial and temporal aspects of the flagellar cycle and the buildup and subsequent relaxation of elastic stresses during the power and recovery strokes.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
Tunable capillary-induced attraction between vertical cylinders
Authors:
Jennifer M. Rieser,
P. E. Arratia,
A. G. Yodh,
J. P. Gollub,
D. J. Durian
Abstract:
Deformation of a fluid interface caused by the presence of objects at the interface can lead to large lateral forces between the objects. We explore these fluid-mediated attractive force between partially submerged vertical cylinders. Forces are experimentally measured by slowly separating cylinder pairs and cylinder triplets after capillary rise is initially established for cylinders in contact.…
▽ More
Deformation of a fluid interface caused by the presence of objects at the interface can lead to large lateral forces between the objects. We explore these fluid-mediated attractive force between partially submerged vertical cylinders. Forces are experimentally measured by slowly separating cylinder pairs and cylinder triplets after capillary rise is initially established for cylinders in contact. For cylinder pairs, numerical computations and a theoretical model are found to be in good agreement with measurements. The model provides insight into the relative importance of the contributions to the total force. For small separations, the pressure term dominates, while at large separations, surface tension becomes more important. A cross-over between the two regimes occurs at a separation of around half of a capillary length. The experimentally measured forces between cylinder triplets are also in good agreement with numerical computations, and we show that pair-wise contributions account for nearly all of the attractive force between triplets. For cylinders with equilibrium capillary rise height greater than the height of the cylinder, we find that the attractive force depends on the height of the cylinders above the submersion level, which provides a means to create precisely-controlled tunable cohesive forces between objects deforming a fluid interface.
△ Less
Submitted 2 December, 2014; v1 submitted 26 November, 2014;
originally announced November 2014.
-
An effective cavity resonance model for enhanced optical transmission through arrays of subwavelength apertures in metal films
Authors:
Eli Lansey,
Isroel M. Mandel,
Jonah N. Gollub,
David T. Crouse
Abstract:
We present a novel theoretical approach for modeling the resonant properties of transmission through subwavelength apertures penetrating metal films. We show that cavity mode theory applies to an effective resonant cavity whose dimensions are determined by the aperture's geometry and the evanescent decay lengths of the associated diffracted waves. This method suggests a concrete physical mechanism…
▽ More
We present a novel theoretical approach for modeling the resonant properties of transmission through subwavelength apertures penetrating metal films. We show that cavity mode theory applies to an effective resonant cavity whose dimensions are determined by the aperture's geometry and the evanescent decay lengths of the associated diffracted waves. This method suggests a concrete physical mechanism for the enhanced transmission observed in periodic aperture arrays, namely it is the evanescently scattered light, localized in the near field of metal surface, which couples into the apertures. Furthermore, it analytically predicts the frequencies of peaks in enhanced transmission, the quality factor of the peaks, and explains their dependence on variation in the hole radius, periodicity, and the film thickness over a wide range of geometries. This model demonstrates strong correlation to simulation and existing results with a high degree of accuracy.
△ Less
Submitted 22 October, 2013;
originally announced October 2013.
-
Dynamical heterogeneity in soft particle suspensions under shear
Authors:
K. N. Nordstrom,
J. P. Gollub,
D. J. Durian
Abstract:
We present experimental measurements of dynamical heterogeneities in a dense system of microgel spheres, sheared at different rates and at different packing fractions in a microfluidic channel, and visualized with high speed digital video microscopy. A four-point dynamic susceptibility is deduced from video correlations, and is found to exhibit a peak that grows in height and shifts to longer time…
▽ More
We present experimental measurements of dynamical heterogeneities in a dense system of microgel spheres, sheared at different rates and at different packing fractions in a microfluidic channel, and visualized with high speed digital video microscopy. A four-point dynamic susceptibility is deduced from video correlations, and is found to exhibit a peak that grows in height and shifts to longer times as the jamming transition is approached from two different directions. In particular, the time for particle-size root-mean square relative displacements is found to scale as $τ^* \sim (\dot γΔφ^4)^{-1}$ where $\dotγ$ is the strain rate and $Δφ=|φ-φ_c|$ is the distance from the random close packing volume fraction. The typical number of particles in a dynamical heterogeneity is deduced from the susceptibility peak height and found to scale as $n^* \sim (\dot γΔφ^4)^{-0.3}$. Exponent uncertainties are less than ten percent. We emphasize that the same power-law behavior is found at packing fractions above and below $φ_c$. Thus, our results considerably extend a previous observation of $n^* \sim \dotγ^{-0.3}$ for granular heap flow at fixed packing below $φ_c$. Furthermore, the implied result $n^*\sim (τ^*)^{0.3}$ compares well with expectation from mode-coupling theory and with prior observations for driven granular systems.
△ Less
Submitted 11 March, 2011;
originally announced March 2011.
-
Measuring Oscillatory Velocity Fields Due to Swimming Algae
Authors:
Jeffrey S. Guasto,
Karl A. Johnson,
J. P. Gollub
Abstract:
In this fluid dynamics video, we present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with d…
▽ More
In this fluid dynamics video, we present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with distance. The instantaneous mechanical power generated by the cells is measured from the velocity fields and peaks at 15 fW. The dissipation per cycle is more than four times what steady swimming would require.
△ Less
Submitted 8 October, 2010;
originally announced October 2010.
-
Oscillatory Flows Induced by Microorganisms Swimming in Two-dimensions
Authors:
Jeffrey S. Guasto,
Karl A. Johnson,
J. P. Gollub
Abstract:
We present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with distance. The instantaneous mec…
▽ More
We present the first time-resolved measurements of the oscillatory velocity field induced by swimming unicellular microorganisms. Confinement of the green alga C. reinhardtii in stabilized thin liquid films allows simultaneous tracking of cells and tracer particles. The measured velocity field reveals complex time-dependent flow structures, and scales inversely with distance. The instantaneous mechanical power generated by the cells is measured from the velocity fields and peaks at 15 fW. The dissipation per cycle is more than four times what steady swimming would require.
△ Less
Submitted 15 August, 2010;
originally announced August 2010.
-
Centrifugal compression of soft particle packings - theory and experiment
Authors:
K. N. Nordstrom,
E. Verneuil,
W. G. Ellenbroek,
T. C. Lubensky,
J. P. Gollub,
D. J. Durian
Abstract:
An exact method is developed for computing the height of an elastic medium subjected to centrifugal compression, for arbitrary constitutive relation between stress and strain. Example solutions are obtained for power-law media and for cases where the stress diverges at a critical strain -- for example as required by packings composed of deformable but incompressible particles. Experimental data ar…
▽ More
An exact method is developed for computing the height of an elastic medium subjected to centrifugal compression, for arbitrary constitutive relation between stress and strain. Example solutions are obtained for power-law media and for cases where the stress diverges at a critical strain -- for example as required by packings composed of deformable but incompressible particles. Experimental data are presented for the centrifugal compression of thermo-responsive N-isopropylacrylamide (NIPA) microgel beads in water. For small radial acceleration, the results are consistent with Hertzian elasticity, and are analyzed in terms of the Young elastic modulus of the bead material. For large radial acceleration, the sample compression asymptotes to a value corresponding to a space-filling particle volume fraction of unity. Therefore we conclude that the gel beads are incompressible, and deform without deswelling. In addition, we find that the Young elastic modulus of the particulate gel material scales with cross-link density raised to the power 3.3+-0.8, somewhat larger than the Flory expectation.
△ Less
Submitted 15 September, 2010; v1 submitted 30 July, 2010;
originally announced July 2010.
-
Microfluidic rheology of soft colloids above and below jamming
Authors:
K. N. Nordstrom,
E. Verneuil,
P. E. Arratia,
A. Basu,
Z. Zhang,
A. G. Yodh,
J. P. Gollub,
D. J. Durian
Abstract:
The rheology near jamming of a suspension of soft colloidal spheres is studied using a custom microfluidic rheometer that provides stress versus strain rate over many decades. We find non-Newtonian behavior below the jamming concentration and yield stress behavior above it. The data may be collapsed onto two branches with critical scaling exponents that agree with expectations based on Hertzian co…
▽ More
The rheology near jamming of a suspension of soft colloidal spheres is studied using a custom microfluidic rheometer that provides stress versus strain rate over many decades. We find non-Newtonian behavior below the jamming concentration and yield stress behavior above it. The data may be collapsed onto two branches with critical scaling exponents that agree with expectations based on Hertzian contacts and viscous drag. These results support the conclusion that jamming is similar to a critical phase transition, but with interaction-dependent exponents.
△ Less
Submitted 22 September, 2010; v1 submitted 26 July, 2010;
originally announced July 2010.
-
Hydrodynamic Irreversibility in Particle Suspensions with Non-Uniform Strain
Authors:
Jeffrey S. Guasto,
Andrew S. Ross,
J. P. Gollub
Abstract:
A dynamical phase transition from reversible to irreversible behavior occurs when particle suspensions are subjected to uniform oscillatory shear, even in the Stokes flow limit. We consider a more general situation with non-uniform strain (e.g. oscillatory channel flow), which is observed to exhibit markedly different dynamics. Self-organization and shear-induced migration only partially explain…
▽ More
A dynamical phase transition from reversible to irreversible behavior occurs when particle suspensions are subjected to uniform oscillatory shear, even in the Stokes flow limit. We consider a more general situation with non-uniform strain (e.g. oscillatory channel flow), which is observed to exhibit markedly different dynamics. Self-organization and shear-induced migration only partially explain the delayed, simultaneous onset of irreversibility across the channel. The onset of irreversibility is accompanied by long-range correlated particle motion. This motion leads to particle activity even at the channel center, where the strain is negligible, and prevents the system from evolving into a reversible state.
△ Less
Submitted 4 March, 2010;
originally announced March 2010.
-
Mixing by Swimming Algae
Authors:
Jeffrey S. Guasto,
Kyriacos C. Leptos,
J. P. Gollub,
Adriana I. Pesci,
Raymond E. Goldstein
Abstract:
In this fluid dynamics video, we demonstrate the microscale mixing enhancement of passive tracer particles in suspensions of swimming microalgae, Chlamydomonas reinhardtii. These biflagellated, single-celled eukaryotes (10 micron diameter) swim with a "breaststroke" pulling motion of their flagella at speeds of about 100 microns/s and exhibit heterogeneous trajectory shapes. Fluorescent tracer p…
▽ More
In this fluid dynamics video, we demonstrate the microscale mixing enhancement of passive tracer particles in suspensions of swimming microalgae, Chlamydomonas reinhardtii. These biflagellated, single-celled eukaryotes (10 micron diameter) swim with a "breaststroke" pulling motion of their flagella at speeds of about 100 microns/s and exhibit heterogeneous trajectory shapes. Fluorescent tracer particles (2 micron diameter) allowed us to quantify the enhanced mixing caused by the swimmers, which is relevant to suspension feeding and biogenic mixing. Without swimmers present, tracer particles diffuse slowly due solely to Brownian motion. As the swimmer concentration is increased, the probability density functions (PDFs) of tracer displacements develop strong exponential tails, and the Gaussian core broadens. High-speed imaging (500 Hz) of tracer-swimmer interactions demonstrates the importance of flagellar beating in creating oscillatory flows that exceed Brownian motion out to about 5 cell radii from the swimmers. Finally, we also show evidence of possible cooperative motion and synchronization between swimming algal cells.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Hybrid resonant phenomenon in a metamaterial structure with integrated resonant magnetic material
Authors:
Jonah N. Gollub,
David R. Smith,
Juan D. Baena
Abstract:
We explore the hybridization of fundamental material resonances with the artificial resonances of metamaterials. A hybrid structure is presented in the waveguide environment that consists of a resonant magnetic material with a characteristic tuneable gyromagnetic response that is integrated into a complementary split ring resonator (CSRR) metamaterial structure. The combined structure exhibits a…
▽ More
We explore the hybridization of fundamental material resonances with the artificial resonances of metamaterials. A hybrid structure is presented in the waveguide environment that consists of a resonant magnetic material with a characteristic tuneable gyromagnetic response that is integrated into a complementary split ring resonator (CSRR) metamaterial structure. The combined structure exhibits a distinct hybrid resonance in which each natural resonance of the CSRR is split into a lower and upper resonance that straddle the frequency for which the magnetic material's permeability is zero. We provide an analytical understanding of this hybrid resonance and define an effective medium theory for the combined structure that demonstrates good agreement with numerical electromagnetic simulations. The designed structure demonstrates the potential for using a ferrimagnetic or ferromagnetic material as a means of creating a tunable metamaterial structure.
△ Less
Submitted 27 October, 2008;
originally announced October 2008.
-
Small dimensional microstrips embedded with ferromagnetic layers: Numerical simulations and experimental results
Authors:
Jonah N. Gollub,
Bijoy Kuanr,
Zibigniew Celinski,
Robert Camley,
David R. Smith
Abstract:
We use a numerical electromagnetic simulation software to investigate a filtering device consisting of a small dimensional microstrips embedded with a thin layer of ferromagnetic material and we compare our results to experimental results. We are able to show good correlation of simulation versus experiment for the magnitude of insertion loss and phase shift. The microstrips considered have dime…
▽ More
We use a numerical electromagnetic simulation software to investigate a filtering device consisting of a small dimensional microstrips embedded with a thin layer of ferromagnetic material and we compare our results to experimental results. We are able to show good correlation of simulation versus experiment for the magnitude of insertion loss and phase shift. The microstrips considered have dimensions on the order of the skin depth of the conductor and hence the field distribution is not easily calculated by analytic methods. We show that numerical simulation methods provide an accurate means of characterizing these structures.
△ Less
Submitted 19 February, 2008;
originally announced February 2008.
-
Curvature Fields, Topology, and the Dynamics of Spatiotemporal Chaos
Authors:
Nicholas T. Ouellette,
J. P. Gollub
Abstract:
The curvature field is measured from tracer particle trajectories in a two-dimensional fluid flow that exhibits spatiotemporal chaos, and is used to extract the hyperbolic and elliptic points of the flow. These special points are pinned to the forcing when the driving is weak, but wander over the domain and interact in pairs at stronger driving, changing the local topology of the flow. Their beh…
▽ More
The curvature field is measured from tracer particle trajectories in a two-dimensional fluid flow that exhibits spatiotemporal chaos, and is used to extract the hyperbolic and elliptic points of the flow. These special points are pinned to the forcing when the driving is weak, but wander over the domain and interact in pairs at stronger driving, changing the local topology of the flow. Their behavior reveals a two-stage transition to spatiotemporal chaos: a gradual loss of spatial and temporal order followed by an abrupt onset of topological changes.
△ Less
Submitted 30 August, 2007; v1 submitted 25 June, 2007;
originally announced June 2007.
-
Predicting the progress of diffusively limited chemical reactions in the presence of chaotic advection
Authors:
P. E. Arratia,
J. P. Gollub
Abstract:
The effects of chaotic advection and diffusion on fast chemical reactions in two-dimensional fluid flows are investigated using experimentally measured stretching fields and fluorescent monitoring of the local concentration. Flow symmetry, Reynolds number, and mean path length affect the spatial distribution and time dependence of the reaction product. A single parameter λ*N, where λis the mean…
▽ More
The effects of chaotic advection and diffusion on fast chemical reactions in two-dimensional fluid flows are investigated using experimentally measured stretching fields and fluorescent monitoring of the local concentration. Flow symmetry, Reynolds number, and mean path length affect the spatial distribution and time dependence of the reaction product. A single parameter λ*N, where λis the mean Lyapunov exponent and N is the number of mixing cycles, can be used to predict the time-dependent total product for flows having different dynamical features.
△ Less
Submitted 15 June, 2007;
originally announced June 2007.
-
Polymeric filament thinning and breakup in microchannels
Authors:
P. E. Arratia,
J. P. Gollub,
D. J. Durian
Abstract:
The effects of elasticity on filament thinning and breakup are investigated in microchannel cross flow. When a viscous solution is stretched by an external immiscible fluid, a low 100 ppm polymer concentration strongly affects the breakup process, compared to the Newtonian case. Qualitatively, polymeric filaments show much slower evolution, and their morphology features multiple connected drops.…
▽ More
The effects of elasticity on filament thinning and breakup are investigated in microchannel cross flow. When a viscous solution is stretched by an external immiscible fluid, a low 100 ppm polymer concentration strongly affects the breakup process, compared to the Newtonian case. Qualitatively, polymeric filaments show much slower evolution, and their morphology features multiple connected drops. Measurements of filament thickness show two main temporal regimes: flow- and capillary-driven. At early times both polymeric and Newtonian fluids are flow-driven, and filament thinning is exponential. At later times, Newtonian filament thinning crosses over to a capillary-driven regime, in which the decay is algebraic. By contrast, the polymeric fluid first crosses over to a second type of flow-driven behavior, in which viscoelastic stresses inside the filament become important and the decay is again exponential. Finally, the polymeric filament becomes capillary-driven at late times with algebraic decay. We show that the exponential flow thinning behavior allows a novel measurement of the extensional viscosities of both Newtonian and polymeric fluids.
△ Less
Submitted 16 December, 2007; v1 submitted 15 March, 2007;
originally announced March 2007.
-
Ordered clusters and dynamical states of particles in a vibrated fluid
Authors:
Greg A. Voth,
B. Bigger,
M. R. Buckley,
W. Losert,
M. P. Brenner,
H. A. Stone,
J. P. Gollub
Abstract:
Fluid-mediated interactions between particles in a vibrating fluid lead to both long range attraction and short range repulsion. The resulting patterns include hexagonally ordered micro-crystallites, time-periodic structures, and chaotic fluctuating patterns with complex dynamics. A model based on streaming flow gives a good quantitative account of the attractive part of the interaction.
Fluid-mediated interactions between particles in a vibrating fluid lead to both long range attraction and short range repulsion. The resulting patterns include hexagonally ordered micro-crystallites, time-periodic structures, and chaotic fluctuating patterns with complex dynamics. A model based on streaming flow gives a good quantitative account of the attractive part of the interaction.
△ Less
Submitted 7 February, 2002;
originally announced February 2002.
-
Precision Measurements of Stretching and Compression in Fluid Mixing
Authors:
G. Voth,
G. Haller,
J. P. Gollub
Abstract:
The mixing of an impurity into a flowing fluid is an important process in many areas of science, including geophysical processes, chemical reactors, and microfluidic devices. In some cases, for example periodic flows, the concepts of nonlinear dynamics provide a deep theoretical basis for understanding mixing. Unfortunately, the building blocks of this theory, i.e. the fixed points and invariant…
▽ More
The mixing of an impurity into a flowing fluid is an important process in many areas of science, including geophysical processes, chemical reactors, and microfluidic devices. In some cases, for example periodic flows, the concepts of nonlinear dynamics provide a deep theoretical basis for understanding mixing. Unfortunately, the building blocks of this theory, i.e. the fixed points and invariant manifolds of the associated Poincare map, have remained inaccessible to direct experimental study, thus limiting the insight that could be obtained. Using precision measurements of tracer particle trajectories in a two-dimensional fluid flow producing chaotic mixing, we directly measure the time-dependent stretching and compression fields. These quantities, previously available only numerically, attain local maxima along lines coinciding with the stable and unstable manifolds, thus revealing the dynamical structures that control mixing. Contours or level sets of a passive impurity field are found to be aligned parallel to the lines of large compression (unstable manifolds) at each instant. This connection appears to persist as the onset of turbulence is approached.
△ Less
Submitted 5 September, 2001;
originally announced September 2001.
-
Granular Shear Flow Dynamics and Forces : Experiment and Continuum Theory
Authors:
L. Bocquet,
W. Losert,
D. Schalk,
T. C. Lubensky,
J. P. Gollub
Abstract:
We analyze the main features of granular shear flow through experimental measurements in a Couette geometry and a comparison to a locally Newtonian, continuum model of granular flow. The model is based on earlier hydrodynamic models, adjusted to take into account the experimentally observed coupling between fluctuations in particle motion and mean-flow properties. Experimentally, the local veloc…
▽ More
We analyze the main features of granular shear flow through experimental measurements in a Couette geometry and a comparison to a locally Newtonian, continuum model of granular flow. The model is based on earlier hydrodynamic models, adjusted to take into account the experimentally observed coupling between fluctuations in particle motion and mean-flow properties. Experimentally, the local velocity fluctuations are found to vary as a power of the local velocity gradient. This can be explained by an effective viscosity that diverges more rapidly as the random-close-packing density is approached than is predicted by Enskog theory for dense hard sphere systems. Experiment and theory are in good agreement, especially for the following key features of granular flow: The flow is confined to a small shear band, fluctuations decay approximately exponentially away from the sheared wall, and the shear stress is approximately independent of shear rate. The functional forms of the velocity and fluctuation profiles predicted by the model agree with the experimental results.
△ Less
Submitted 19 December, 2000;
originally announced December 2000.
-
Particle dynamics in sheared granular matter
Authors:
W. Losert,
L. Bocquet,
T. C. Lubensky,
J. P. Gollub
Abstract:
The particle dynamics and shear forces of granular matter in a Couette geometry are determined experimentally. The normalized tangential velocity $V(y)$ declines strongly with distance $y$ from the moving wall, independent of the shear rate and of the shear dynamics. Local RMS velocity fluctuations $δV(y)$ scale with the local velocity gradient to the power $0.4 \pm 0.05$. These results agree wi…
▽ More
The particle dynamics and shear forces of granular matter in a Couette geometry are determined experimentally. The normalized tangential velocity $V(y)$ declines strongly with distance $y$ from the moving wall, independent of the shear rate and of the shear dynamics. Local RMS velocity fluctuations $δV(y)$ scale with the local velocity gradient to the power $0.4 \pm 0.05$. These results agree with a locally Newtonian, continuum model, where the granular medium is assumed to behave as a liquid with a local temperature $δV(y)^2$ and density dependent viscosity.
△ Less
Submitted 24 April, 2000;
originally announced April 2000.
-
Scarred Patterns in Surface Waves
Authors:
A. Kudrolli,
Mathew C. Abraham,
J. P. Gollub
Abstract:
Surface wave patterns are investigated experimentally in a system geometry that has become a paradigm of quantum chaos: the stadium billiard. Linear waves in bounded geometries for which classical ray trajectories are chaotic are known to give rise to scarred patterns. Here, we utilize parametrically forced surface waves (Faraday waves), which become progressively nonlinear beyond the wave insta…
▽ More
Surface wave patterns are investigated experimentally in a system geometry that has become a paradigm of quantum chaos: the stadium billiard. Linear waves in bounded geometries for which classical ray trajectories are chaotic are known to give rise to scarred patterns. Here, we utilize parametrically forced surface waves (Faraday waves), which become progressively nonlinear beyond the wave instability threshold, to investigate the subtle interplay between boundaries and nonlinearity. Only a subset (three main types) of the computed linear modes of the stadium are observed in a systematic scan. These correspond to modes in which the wave amplitudes are strongly enhanced along paths corresponding to certain periodic ray orbits. Many other modes are found to be suppressed, in general agreement with a prediction by Agam and Altshuler based on boundary dissipation and the Lyapunov exponent of the associated orbit. Spatially asymmetric or disordered (but time-independent) patterns are also found even near onset. As the driving acceleration is increased, the time-independent scarred patterns persist, but in some cases transitions between modes are noted. The onset of spatiotemporal chaos at higher forcing amplitude often involves a nonperiodic oscillation between spatially ordered and disordered states. We characterize this phenomenon using the concept of pattern entropy. The rate of change of the patterns is found to be reduced as the state passes temporarily near the ordered configurations of lower entropy. We also report complex but highly symmetric (time-independent) patterns far above onset in the regime that is normally chaotic.
△ Less
Submitted 14 September, 2000; v1 submitted 24 February, 2000;
originally announced February 2000.
-
Mechanisms for slow strengthening in granular materials
Authors:
W. Losert,
J. -C. Geminard,
S. Nasuno,
J. P. Gollub
Abstract:
Several mechanisms cause a granular material to strengthen over time at low applied stress. The strength is determined from the maximum frictional force F_max experienced by a shearing plate in contact with wet or dry granular material after the layer has been at rest for a waiting time τ. The layer strength increases roughly logarithmically with τ-only- if a shear stress is applied during the w…
▽ More
Several mechanisms cause a granular material to strengthen over time at low applied stress. The strength is determined from the maximum frictional force F_max experienced by a shearing plate in contact with wet or dry granular material after the layer has been at rest for a waiting time τ. The layer strength increases roughly logarithmically with τ-only- if a shear stress is applied during the waiting time. The mechanisms of strengthening are investigated by sensitive displacement measurements and by imaging of particle motion in the shear zone. Granular matter can strengthen due to a slow shift in the particle arrangement under shear stress. Humidity also leads to strengthening, but is found not to be its sole cause. In addition to these time dependent effects, the static friction coefficient can also be increased by compaction of the granular material under some circumstances, and by cycling of the applied shear stress.
△ Less
Submitted 22 September, 1999;
originally announced September 1999.
-
Velocity statistics in excited granular media
Authors:
W. Losert,
D. G. W. Cooper,
J. Delour,
A. Kudrolli,
J. P. Gollub
Abstract:
We present an experimental study of velocity statistics for a partial layer of inelastic colliding beads driven by a vertically oscillating boundary. Over a wide range of parameters (accelerations 3-8 times the gravitational acceleration), the probability distribution P(v) deviates measurably from a Gaussian for the two horizontal velocity components. It can be described by P(v) ~ exp(-|v/v_c|^1…
▽ More
We present an experimental study of velocity statistics for a partial layer of inelastic colliding beads driven by a vertically oscillating boundary. Over a wide range of parameters (accelerations 3-8 times the gravitational acceleration), the probability distribution P(v) deviates measurably from a Gaussian for the two horizontal velocity components. It can be described by P(v) ~ exp(-|v/v_c|^1.5), in agreement with a recent theory. The characteristic velocity v_c is proportional to the peak velocity of the boundary. The granular temperature, defined as the mean square particle velocity, varies with particle density and exhibits a maximum at intermediate densities. On the other hand, for free cooling in the absence of excitation, we find an exponential velocity distribution. Finally, we examine the sharing of energy between particles of different mass. The more massive particles are found to have greater kinetic energy.
△ Less
Submitted 29 June, 1999; v1 submitted 20 January, 1999;
originally announced January 1999.
-
Propagating front in an excited granular layer
Authors:
W. Losert,
D. G. W. Cooper,
J. P. Gollub
Abstract:
A partial monolayer of ~ 20000 uniform spherical steel beads, vibrated vertically on a flat plate, shows remarkable ordering transitions and cooperative behavior just below 1g maximum acceleration. We study the stability of a quiescent disordered or ``amorphous'' state formed when the acceleration is switched off in the excited ``gaseous'' state. The transition from the amorphous state back to t…
▽ More
A partial monolayer of ~ 20000 uniform spherical steel beads, vibrated vertically on a flat plate, shows remarkable ordering transitions and cooperative behavior just below 1g maximum acceleration. We study the stability of a quiescent disordered or ``amorphous'' state formed when the acceleration is switched off in the excited ``gaseous'' state. The transition from the amorphous state back to the gaseous state upon increasing the plate's acceleration is generally subcritical: An external perturbation applied to one bead initiates a propagating front that produces a rapid transition. We measure the front velocity as a function of the applied acceleration. This phenomenon is explained by a model based on a single vibrated particle with multiple attractors that is perturbed by collisions. A simulation shows that a sufficiently high rate of interparticle collisions can prevent trap** in the attractor corresponding to the nonmoving ground state.
△ Less
Submitted 5 April, 1999; v1 submitted 5 December, 1998;
originally announced December 1998.
-
Frictional Mechanics of Wet Granular Material
Authors:
J. -C. Geminard,
W. Losert,
J. P. Gollub
Abstract:
The mechanical response of a wet granular layer to imposed shear is studied experimentally at low applied normal stress. The granular material is immersed in water and the shear is applied by sliding a plate resting on the upper surface of the layer. We monitor simultaneously the horizontal and the vertical displacements of the plate to submicron accuracy with millisecond time resolution. The re…
▽ More
The mechanical response of a wet granular layer to imposed shear is studied experimentally at low applied normal stress. The granular material is immersed in water and the shear is applied by sliding a plate resting on the upper surface of the layer. We monitor simultaneously the horizontal and the vertical displacements of the plate to submicron accuracy with millisecond time resolution. The relations between the plate displacement, the dilation of the layer and the measured frictional force are analyzed in detail. When slip begins, the dilation increases exponentially over a slip distance comparable to the particle radius. We find that the total dilation and the steady state frictional force do not depend on the driving velocity, but do depend linearly on the applied normal stress. The frictional force also depends linearly on the dilation rate (rather than the dilation itself), and reaches a maximum value during the transient acceleration. We find that the layer can temporarily sustain a shear stress that is in excess of the critical value that will eventually lead to slip. We describe an empirical model that describes much of what we observe. This model differs in some respects from those used previously at stresses 10^6 times larger.
△ Less
Submitted 6 April, 1999; v1 submitted 17 November, 1998;
originally announced November 1998.
-
Time-Resolved Studies of Stick-Slip Friction in Sheared Granular Layers
Authors:
S. Nasuno,
A. Kudrolli,
A. Bak,
J. P. Gollub
Abstract:
Sensitive and fast force measurements are performed on sheared granular layers undergoing stick-slip motion, along with simultaneous imaging. A full study has been done for spherical particles with a +-20% size distribution. Stick-slip motion due to repetitive fluidization of the layer occurs for low driving velocities. Between major slip events, slight creep occurs that is variable from one eve…
▽ More
Sensitive and fast force measurements are performed on sheared granular layers undergoing stick-slip motion, along with simultaneous imaging. A full study has been done for spherical particles with a +-20% size distribution. Stick-slip motion due to repetitive fluidization of the layer occurs for low driving velocities. Between major slip events, slight creep occurs that is variable from one event to the next. The effects of changing the stiffness k and velocity V of the driving system are studied in detail. The stick-slip motion is almost periodic for spherical particles over a wide range of parameters, but becomes irregular when k is large and V is relatively small. At larger V, the motion becomes smoother and is affected by the inertia of the upper plate bounding the layer. Measurements of the period T and amplitude A of the relative motion are presented as a function of V. At a critical value Vc, a transition to continuous sliding motion occurs that is discontinuous for k not too large. The time dependence of the instantaneous velocity of the upper plate and the frictional force produced by the granular layer are determined within individual slip** events. The force is a multi-valued function of the instantaneous velocity, with pronounced hysteresis and a sudden drop prior to resticking. Measurements of vertical displacement reveal a small dilation of the material (about one tenth of the mean particle size in a layer 20 particles deep) associated with each slip event. Finally, optical imaging reveals that localized microscopic rearrangements precede (and follow) each slip event. The behavior of smooth particles is contrasted with that of rough particles.
△ Less
Submitted 1 July, 1998;
originally announced July 1998.
-
Velocity distributions in vertically vibrated granular media
Authors:
J. Delour,
A. Kudrolli,
J. P. Gollub
Abstract:
This paper has been withdrawn by the authors. It has been superceded by an improved investigation: "Velocity statistics in vibrated granular media" W. Losert, D.G.W. Cooper, J. Delour, A. Kudrolli, and J.P. Gollub (submitted to Chaos for a special issue on Granular Materials) cond-mat/9901203
This paper has been withdrawn by the authors. It has been superceded by an improved investigation: "Velocity statistics in vibrated granular media" W. Losert, D.G.W. Cooper, J. Delour, A. Kudrolli, and J.P. Gollub (submitted to Chaos for a special issue on Granular Materials) cond-mat/9901203
△ Less
Submitted 21 January, 1999; v1 submitted 30 June, 1998;
originally announced June 1998.
-
Superlattice Patterns in Surface Waves
Authors:
A. Kudrolli,
B. Pier,
J. P. Gollub
Abstract:
We report novel superlattice wave patterns at the interface of a fluid layer driven vertically. These patterns are described most naturally in terms of two interacting hexagonal sublattices. Two frequency forcing at very large aspect ratio is utilized in this work. A superlattice pattern ("superlattice-I") consisting of two hexagonal lattices oriented at a relative angle of 22^o is obtained with…
▽ More
We report novel superlattice wave patterns at the interface of a fluid layer driven vertically. These patterns are described most naturally in terms of two interacting hexagonal sublattices. Two frequency forcing at very large aspect ratio is utilized in this work. A superlattice pattern ("superlattice-I") consisting of two hexagonal lattices oriented at a relative angle of 22^o is obtained with a 6:7 ratio of forcing frequencies. Several theoretical approaches that may be useful in understanding this pattern have been proposed. In another example, the waves are fully described by two superimposed hexagonal lattices with a wavelength ratio of sqrt(3), oriented at a relative angle of 30^o. The time dependence of this "superlattice-II" wave pattern is unusual. The instantaneous patterns reveal a time-periodic stripe modulation that breaks the 6-fold symmetry at any instant, but the stripes are absent in the time average. The instantaneous patterns are not simply amplitude modulations of the primary standing wave. A transition from the superlattice-II state to a 12-fold quasi-crystalline pattern is observed by changing the relative phase of the two forcing frequencies. Phase diagrams of the observed patterns (including superlattices, quasicrystalline patterns, ordinary hexagons, and squares) are obtained as a function of the amplitudes and relative phases of the driving accelerations.
△ Less
Submitted 11 March, 1998;
originally announced March 1998.