Showing 1–8 of 8 results for author: Golish, D R

QRIS: A Quantitative Reflectance Imaging System for the Pristine Sample of Asteroid Bennu

Authors: Ruby E. Fulford, Dathon R. Golish, Dante S. Lauretta, Daniella N. DellaGiustina, Steve Meyer, Nicole Lunning, Christopher Snead, Kevin Righter, Jason P. Dworkin, Carina A. Bennett, Harold C. Connolly Jr., Taylor Johnson, Anjani T. Polit, Pierre Haennecour, Andrew J. Ryan

Abstract: The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preli… ▽ More The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preliminary examination of the Bennu sample. QRIS uses a 12-bit machine vision camera to measure reflectance over wavelength bands spanning the near ultraviolet to the near infrared. Raw data are processed by a calibration pipeline that generates a series of monochromatic, high-dynamic-range reflectance images, as well as band ratio maps, band depth maps, and 3-channel color images. The purpose of these spectral reflectance data is to help characterize lithologies in the sample and compare them to lithologies observed on Bennu by the OSIRIS-REx spacecraft. This initial assessment of lithological diversity was intended to help select the subsamples that will be used to address mission science questions about the early solar system and the origins of life and to provide important context for the selection of representative subsamples for preservation and distribution to international partners. When QRIS imaged the Bennu sample, unexpected calibration issues arose that had not been evident at imaging rehearsals and negatively impacted the quality of QRIS data. These issues were caused by stray light within the lens and reflections off the glovebox window and interior, and were exacerbated by the sample's extremely low reflectance. QRIS data were useful for confirming conclusions drawn from other data, but reflectance and spectral data from QRIS alone unfortunately have limited utility. △ Less

Submitted 2 May, 2024; v1 submitted 28 February, 2024; originally announced February 2024.

Comments: 41 pages, 27 figures

Comparison of optical spectra between asteroids Ryugu and Bennu:I. Cross calibration between Hayabusa2/ONC-T and OSIRIS-REx/MapCam

Authors: K. Yumoto, E. Tatsumi, T. Kouyama, D. R. Golish, Y. Cho, T. Morota, S. Kameda, H. Sato, B. Rizk, D. N. DellaGiustina, Y. Yokota, H. Suzuki, J. de Leon, H. Campins, J. Licandro, M. Popescu, J. L. Rizos, R. Honda, M. Yamada, N. Sakatani, C. Honda, M. Matsuoka, M. Hayakawa, H. Sawada, K. Ogawa , et al. (3 additional authors not shown)

Abstract: Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. H… ▽ More Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. However, ONC-T and MapCam have a large imager-to-imager systematic error of up to 15% caused by the difference in radiometric calibration targets. To resolve this problem, we cross calibrated albedo and color data between the two instruments using the Moon as the common calibration standard. The images of the Moon taken by ONC-T and MapCam were compared with those simulated using photometry models developed from lunar orbiter data. Our results show that the cross-calibrated reflectance of Ryugu and Bennu can be obtained by upscaling the pre-cross-calibrated reflectance of Bennu by 13.3 +/- 1.6% at b band, 13.2 +/- 1.5% at v band, 13.6 +/- 1.7% at w band, and 14.8 +/- 1.8% at x band, while those for Ryugu are kept the same. These factors compensate for the imager-to-imager bias caused by differences in targets used for radiometric calibration and solar irradiance models used for data reduction. Need for such large upscaling underscore the importance of using the cross-calibrated data for accurately comparing the Ryugu and Bennu data. The uncertainty in these factors show that the reflectance of Ryugu and Bennu can be compared with <2% accuracy after applying our results. By applying our cross calibration, the geometric albedo of Bennu became consistent with those observed by ground-based telescopes and OVIRS. Our result can be simply applied by multiplying a constant to the publicly available data and enables accurate comparison of the optical spectra of Ryugu and Bennu in future studies. △ Less

Submitted 18 June, 2024; v1 submitted 23 June, 2023; originally announced June 2023.

Journal ref: Icarus, 417, 116122 (2024)

Widely distributed exogenic materials of varying compositions and morphologies on asteroid (101955) Bennu

Authors: Eri Tatsumi, Marcel Popescu, Humberto Campins, Julia de León, Juan Luis Rizos Carcía, Javier Licandro, Amy A. Simon, Hannah H. Kaplan, Daniella N. DellaGiustina, Dathon R. Golish, Dante S. Lauretta

Abstract: Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydro… ▽ More Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydrous silicates. The exogenic materials are spatially resolved by the telescopic camera PolyCam. All such materials are brighter than their surroundings, and they are expressed in a variety of morphologies: homogeneous, breccia-like, inclusion-like, and others. Inclusion-like features are the most common. Visible spectrophotometry was obtained for 46 of the 77 locations from MapCam images. Principal component analysis indicates at least two trends: (i) mixing of Bennu's average spectrum with a strong 1-um band absorption, possibly from pyroxene-rich material, and (ii) mixing with a weak 1-um band absorption. The endmember with a strong 1-um feature is consistent with Howardite-Eucrite-Diogenite (HED) meteorites, whereas the one showing a weak 1-um feature may be consistent with HEDs, ordinary chondrites, or carbonaceous chondrites. The variation in the few available near-infrared reflectance spectra strongly suggests varying compositions among the exogenic materials. Thus, Bennu might record the remnants of multiple impacts with different compositions to its parent body, which could have happened in the very early history of the Solar System. Moreover, at least one of the exogenic objects is compositionally different from the exogenic materials found on the similar asteroid (162173) Ryugu, and they suggest different impact tracks. △ Less

Submitted 3 September, 2021; originally announced September 2021.

Comments: 39 pages, 19 figures, accepted manuscript for MNRAS

Using artificial neural networks to improve photometric modeling in airless bodies

Authors: J. L. Rizos, A. Asensio-Ramos, D. R. Golish, D. N. DellaGiustina, J. Licandro, J. de León, H. Campins, E. Tatsumi, M. Popescu

Abstract: Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, au… ▽ More Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, automatic, and efficient photometric modeling methodology which is tested and validated using Bennu images acquired by the camera MapCam from the OSIRIS-REx spacecraft. It consists of a supervised machine learning algorithm through an artificial neural network. Our system provides a more precise modeling for all color filters than the previous procedures which are already published, offering an improvement over this classic approach of up to 14.30%, as well as a considerable reduction in computing time. △ Less

Submitted 27 August, 2021; v1 submitted 1 June, 2021; originally announced June 2021.

Characterization of Exogenic Boulders on Near-Earth Asteroid (101955) Bennu from OSIRIS-REx Color Images

Authors: Lucille Le Corre, Vishnu Reddy, William F. Bottke, Daniella N. DellaGiustina, Keara Burke, Jennifer Nolau, Robin B. Van Auken, Dathon R. Golish, Juan Sanchez, Jian-Yang Li, Christian d'Aubigny, Bashar Rizk, Dante Lauretta

Abstract: A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-c… ▽ More A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-color MapCam data from the OSIRIS-REx mission. We confirm the presence of exogenic boulders similar to eucrites and find that mixtures of eucrites with carbonaceous material is also a possible composition for some boulders. Some of the exogenic boulders have spectral properties similar to those of ordinary chondrite (OC) meteorites, although the laboratory spectra of these meteorites have a higher albedo than those measured on Bennu, which could be explained by either a grain size effect, the presence of impact melt, or optical mixing with carbonaceous material owing to dust coating. Our Monte Carlo simulations predict that the median amount of OC mass added to the parent body of Bennu is 0.055% and 0.037% of the volume of a 100- and 200-km-diameter parent body, respectively. If Bennu was a uniformly mixed byproduct of parent body and S-type projectiles, the equivalent mass of OC material would be a sphere with a diameter of 36 to 40 m (or a volume of 24,200 to 33,600 m3). The total amount of OC material in the interior of Bennu estimated from the MapCam data is slightly higher (91,000-150,000 m3). △ Less

Submitted 23 April, 2021; originally announced April 2021.

Comments: 36 pages, 11 figures, 2 tables

Journal ref: Planet. Sci. J. 2 114 (2021)

Bennu's global surface and two candidate sample sites characterized by spectral clustering of OSIRIS-REx multispectral images

Authors: J. L. Rizos, J. de Leon, J. Licandro, D. R. Golish, H. Campins, E. Tatsumi, M. Popescu, D. N. DellaGiustina, M. Pajola, J. -Y. Li, K. J. Becker, D. S. Lauretta

Abstract: The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work,… ▽ More The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work, we apply an unsupervised machine learning classification through the K-Means algorithm to spectrophotometrically characterize the surface of Bennu, and in particular Nightingale and Osprey. We first analyze a global mosaic of Bennu, from which we find four clusters scattered across the surface, reduced to three when we normalize the images at 550 nm. The three spectral clusters are associated with boulders and show significant differences in spectral slope and UV value. We do not see evidence of latitudinal non-uniformity, which suggests that Bennu's surface is well-mixed. In our higher-resolution analysis of the primary and backup sample sites, we find three representative normalized clusters, confirming an inverse correlation between reflectance and spectral slope (the darkest areas being the reddest ones) and between b' normalized reflectance and slope. Nightingale and Osprey are redder than the global surface of Bennu by more than $1σ$ from average, consistent with previous findings, with Nightingale being the reddest ($S' = (- 0.3 \pm 1.0) \times 10^{- 3}$ percent per thousand angstroms). We see hints of a weak absorption band at 550 nm at the candidate sample sites and globally, which lends support to the proposed presence of magnetite on Bennu. △ Less

Submitted 6 April, 2021; originally announced April 2021.

Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu

Authors: Pedro H. Hasselmann, Sonia Fornasier, Maria A. Barucci, Alice Praet, Beth E. Clark, Jian-Yang Li, Dathon R. Golish, Daniella N. DellaGiustina, Jasinghege Don P. Deshapriya, Xian-Duan Zou, Mike G. Daly, Olivier S. Barnouin, Amy A. Simon, Dante S. Lauretta

Abstract: The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpr… ▽ More The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether. △ Less

Submitted 8 October, 2020; originally announced October 2020.

Comments: 15 pages, 11 figures

Journal ref: Icarus 2020

Overcoming the Challenges Associated with Image-based Map** of Small Bodies in Preparation for the OSIRIS-REx Mission to (101955) Bennu

Authors: D. N. DellaGiustina, C. A. Bennett, K. Becker, D. R Golish, L. Le Corre, D. A. Cook, K. L. Edmundson, M. Chojnacki, S. S. Sutton, M. P. Milazzo, B. Carcich, M. C. Nolan, N. Habib, K. N. Burke, T. Becker, P. H. Smith, K. J. Walsh, K. Getzandanner, D. R. Wibben, J. M. Leonard, M. M. Westermann, A. T. Polit, J. N. Kidd Jr., C. W. Hergenrother, W. V. Boynton , et al. (16 additional authors not shown)

Abstract: The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can re… ▽ More The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecraft's sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with map** a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroid's surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based map** of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude. △ Less

Submitted 23 October, 2018; originally announced October 2018.

Comments: 31 pages, 10 figures, 2 tables