-
Comparison of optical spectra between asteroids Ryugu and Bennu: II. High-precision analysis for space weathering trends
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de León,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the…
▽ More
The influence of space weathering on the observed spectra of C-complex asteroids remains uncertain. This has long hindered our understanding of their composition through telescope observations. Multi-band imaging of Ryugu by ONC-T on Hayabusa2 and that of Bennu by MapCam on OSIRIS-REx found opposite spectral trends of space weathering; Ryugu darkened/reddened while Bennu brightened/blued. How the spectra of Ryugu and Bennu evolved relative to each other would place a constraint for understanding their origins and evolutions. In this study, we compared the space weathering trends on Ryugu and Bennu by applying the results of cross calibration between ONC-T and MapCam. We show that the average Bennu surface is brighter by 18.0 $\pm$ 1.5% at 550 nm and bluer by 0.18 $\pm$ 0.03 $μ$m$^{-1}$ (480-850 nm slope) than Ryugu. The spectral slopes of surface materials are more uniform on Bennu than on Ryugu at spatial scales $\gtrsim$1 m, but Bennu is more heterogeneous at $\lesssim$1 m. This suggests that lateral mixing due to resurfacing may have been more efficient on Bennu. The reflectance-spectral slope distributions of craters on Ryugu and Bennu appeared to follow two trend lines with an offset before cross calibration, but they converged to a single straight trend without a bend after cross calibration. We show that the spectra of the freshest craters on Ryugu and Bennu are indistinguishable within the uncertainty of cross calibration. These results suggest that Ryugu and Bennu initially had similar spectra before space weathering and that they evolved in completely opposite directions along the same trend line, subsequently evolving into asteroids with different disk-averaged spectra. These findings further suggest that space weathering likely expanded the spectral slope variation of C-complex asteroids, implying that they may have formed from materials with more uniform spectral slopes.
△ Less
Submitted 7 July, 2024;
originally announced July 2024.
-
QRIS: A Quantitative Reflectance Imaging System for the Pristine Sample of Asteroid Bennu
Authors:
Ruby E. Fulford,
Dathon R. Golish,
Dante S. Lauretta,
Daniella N. DellaGiustina,
Steve Meyer,
Nicole Lunning,
Christopher Snead,
Kevin Righter,
Jason P. Dworkin,
Carina A. Bennett,
Harold C. Connolly Jr.,
Taylor Johnson,
Anjani T. Polit,
Pierre Haennecour,
Andrew J. Ryan
Abstract:
The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preli…
▽ More
The Quantitative Reflectance Imaging System (QRIS) is a laboratory-based spectral imaging system constructed to image the sample of asteroid Bennu delivered to Earth by the Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. The system was installed in the OSIRIS-REx cleanroom at NASA's Johnson Space Center to collect data during preliminary examination of the Bennu sample. QRIS uses a 12-bit machine vision camera to measure reflectance over wavelength bands spanning the near ultraviolet to the near infrared. Raw data are processed by a calibration pipeline that generates a series of monochromatic, high-dynamic-range reflectance images, as well as band ratio maps, band depth maps, and 3-channel color images. The purpose of these spectral reflectance data is to help characterize lithologies in the sample and compare them to lithologies observed on Bennu by the OSIRIS-REx spacecraft. This initial assessment of lithological diversity was intended to help select the subsamples that will be used to address mission science questions about the early solar system and the origins of life and to provide important context for the selection of representative subsamples for preservation and distribution to international partners. When QRIS imaged the Bennu sample, unexpected calibration issues arose that had not been evident at imaging rehearsals and negatively impacted the quality of QRIS data. These issues were caused by stray light within the lens and reflections off the glovebox window and interior, and were exacerbated by the sample's extremely low reflectance. QRIS data were useful for confirming conclusions drawn from other data, but reflectance and spectral data from QRIS alone unfortunately have limited utility.
△ Less
Submitted 2 May, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
Comparison of optical spectra between asteroids Ryugu and Bennu:I. Cross calibration between Hayabusa2/ONC-T and OSIRIS-REx/MapCam
Authors:
K. Yumoto,
E. Tatsumi,
T. Kouyama,
D. R. Golish,
Y. Cho,
T. Morota,
S. Kameda,
H. Sato,
B. Rizk,
D. N. DellaGiustina,
Y. Yokota,
H. Suzuki,
J. de Leon,
H. Campins,
J. Licandro,
M. Popescu,
J. L. Rizos,
R. Honda,
M. Yamada,
N. Sakatani,
C. Honda,
M. Matsuoka,
M. Hayakawa,
H. Sawada,
K. Ogawa
, et al. (3 additional authors not shown)
Abstract:
Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. H…
▽ More
Asteroids (162173) Ryugu and (101955) Bennu observed by Hayabusa2 and OSIRIS-REx share many properties, but spectral observations by the telescopic Optical Navigation Camera (ONC-T) and MapCam detected subtle but significant differences, which may reflect differences in their origin and evolution. Comparing these differences on the same absolute scale is necessary for understanding their causes. However, ONC-T and MapCam have a large imager-to-imager systematic error of up to 15% caused by the difference in radiometric calibration targets. To resolve this problem, we cross calibrated albedo and color data between the two instruments using the Moon as the common calibration standard. The images of the Moon taken by ONC-T and MapCam were compared with those simulated using photometry models developed from lunar orbiter data. Our results show that the cross-calibrated reflectance of Ryugu and Bennu can be obtained by upscaling the pre-cross-calibrated reflectance of Bennu by 13.3 +/- 1.6% at b band, 13.2 +/- 1.5% at v band, 13.6 +/- 1.7% at w band, and 14.8 +/- 1.8% at x band, while those for Ryugu are kept the same. These factors compensate for the imager-to-imager bias caused by differences in targets used for radiometric calibration and solar irradiance models used for data reduction. Need for such large upscaling underscore the importance of using the cross-calibrated data for accurately comparing the Ryugu and Bennu data. The uncertainty in these factors show that the reflectance of Ryugu and Bennu can be compared with <2% accuracy after applying our results. By applying our cross calibration, the geometric albedo of Bennu became consistent with those observed by ground-based telescopes and OVIRS. Our result can be simply applied by multiplying a constant to the publicly available data and enables accurate comparison of the optical spectra of Ryugu and Bennu in future studies.
△ Less
Submitted 18 June, 2024; v1 submitted 23 June, 2023;
originally announced June 2023.
-
Widely distributed exogenic materials of varying compositions and morphologies on asteroid (101955) Bennu
Authors:
Eri Tatsumi,
Marcel Popescu,
Humberto Campins,
Julia de León,
Juan Luis Rizos Carcía,
Javier Licandro,
Amy A. Simon,
Hannah H. Kaplan,
Daniella N. DellaGiustina,
Dathon R. Golish,
Dante S. Lauretta
Abstract:
Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydro…
▽ More
Using the multi-band imager MapCam onboard the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) spacecraft, we identified 77 instances of proposed exogenic materials distributed globally on the surface of the B-type asteroid (101955) Bennu. We identified materials as exogenic on the basis of an absorption near 1 um that is indicative of anhydrous silicates. The exogenic materials are spatially resolved by the telescopic camera PolyCam. All such materials are brighter than their surroundings, and they are expressed in a variety of morphologies: homogeneous, breccia-like, inclusion-like, and others. Inclusion-like features are the most common. Visible spectrophotometry was obtained for 46 of the 77 locations from MapCam images. Principal component analysis indicates at least two trends: (i) mixing of Bennu's average spectrum with a strong 1-um band absorption, possibly from pyroxene-rich material, and (ii) mixing with a weak 1-um band absorption. The endmember with a strong 1-um feature is consistent with Howardite-Eucrite-Diogenite (HED) meteorites, whereas the one showing a weak 1-um feature may be consistent with HEDs, ordinary chondrites, or carbonaceous chondrites. The variation in the few available near-infrared reflectance spectra strongly suggests varying compositions among the exogenic materials. Thus, Bennu might record the remnants of multiple impacts with different compositions to its parent body, which could have happened in the very early history of the Solar System. Moreover, at least one of the exogenic objects is compositionally different from the exogenic materials found on the similar asteroid (162173) Ryugu, and they suggest different impact tracks.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Using artificial neural networks to improve photometric modeling in airless bodies
Authors:
J. L. Rizos,
A. Asensio-Ramos,
D. R. Golish,
D. N. DellaGiustina,
J. Licandro,
J. de León,
H. Campins,
E. Tatsumi,
M. Popescu
Abstract:
Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, au…
▽ More
Relevant information about physical properties of the surface of airless bodies such as porosity, particle size, or roughness can be inferred knowing the dependence of the brightness with illumination and observing geometry. Additionally, this knowledge is necessary to standardize or photometrically correct data acquired under different illumination conditions. In this work we develop a robust, automatic, and efficient photometric modeling methodology which is tested and validated using Bennu images acquired by the camera MapCam from the OSIRIS-REx spacecraft. It consists of a supervised machine learning algorithm through an artificial neural network. Our system provides a more precise modeling for all color filters than the previous procedures which are already published, offering an improvement over this classic approach of up to 14.30%, as well as a considerable reduction in computing time.
△ Less
Submitted 27 August, 2021; v1 submitted 1 June, 2021;
originally announced June 2021.
-
Characterization of Exogenic Boulders on Near-Earth Asteroid (101955) Bennu from OSIRIS-REx Color Images
Authors:
Lucille Le Corre,
Vishnu Reddy,
William F. Bottke,
Daniella N. DellaGiustina,
Keara Burke,
Jennifer Nolau,
Robin B. Van Auken,
Dathon R. Golish,
Juan Sanchez,
Jian-Yang Li,
Christian d'Aubigny,
Bashar Rizk,
Dante Lauretta
Abstract:
A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-c…
▽ More
A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-color MapCam data from the OSIRIS-REx mission. We confirm the presence of exogenic boulders similar to eucrites and find that mixtures of eucrites with carbonaceous material is also a possible composition for some boulders. Some of the exogenic boulders have spectral properties similar to those of ordinary chondrite (OC) meteorites, although the laboratory spectra of these meteorites have a higher albedo than those measured on Bennu, which could be explained by either a grain size effect, the presence of impact melt, or optical mixing with carbonaceous material owing to dust coating. Our Monte Carlo simulations predict that the median amount of OC mass added to the parent body of Bennu is 0.055% and 0.037% of the volume of a 100- and 200-km-diameter parent body, respectively. If Bennu was a uniformly mixed byproduct of parent body and S-type projectiles, the equivalent mass of OC material would be a sphere with a diameter of 36 to 40 m (or a volume of 24,200 to 33,600 m3). The total amount of OC material in the interior of Bennu estimated from the MapCam data is slightly higher (91,000-150,000 m3).
△ Less
Submitted 23 April, 2021;
originally announced April 2021.
-
Bennu's global surface and two candidate sample sites characterized by spectral clustering of OSIRIS-REx multispectral images
Authors:
J. L. Rizos,
J. de Leon,
J. Licandro,
D. R. Golish,
H. Campins,
E. Tatsumi,
M. Popescu,
D. N. DellaGiustina,
M. Pajola,
J. -Y. Li,
K. J. Becker,
D. S. Lauretta
Abstract:
The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work,…
▽ More
The OSIRIS-REx spacecraft encountered the asteroid (101955) Bennu on December 3, 2018, and has since acquired extensive data from the payload of scientific instruments on board. In 2019, the OSIRIS-REx team selected primary and backup sample collection sites, called Nightingale and Osprey, respectively. On October 20, 2020, OSIRIS-REx successfully collected material from Nightingale. In this work, we apply an unsupervised machine learning classification through the K-Means algorithm to spectrophotometrically characterize the surface of Bennu, and in particular Nightingale and Osprey. We first analyze a global mosaic of Bennu, from which we find four clusters scattered across the surface, reduced to three when we normalize the images at 550 nm. The three spectral clusters are associated with boulders and show significant differences in spectral slope and UV value. We do not see evidence of latitudinal non-uniformity, which suggests that Bennu's surface is well-mixed. In our higher-resolution analysis of the primary and backup sample sites, we find three representative normalized clusters, confirming an inverse correlation between reflectance and spectral slope (the darkest areas being the reddest ones) and between b' normalized reflectance and slope. Nightingale and Osprey are redder than the global surface of Bennu by more than $1σ$ from average, consistent with previous findings, with Nightingale being the reddest ($S' = (- 0.3 \pm 1.0) \times 10^{- 3}$ percent per thousand angstroms). We see hints of a weak absorption band at 550 nm at the candidate sample sites and globally, which lends support to the proposed presence of magnetite on Bennu.
△ Less
Submitted 6 April, 2021;
originally announced April 2021.
-
Modeling optical roughness and first-order scattering processes from OSIRIS-REx color images of the rough surface of asteroid (101955) Bennu
Authors:
Pedro H. Hasselmann,
Sonia Fornasier,
Maria A. Barucci,
Alice Praet,
Beth E. Clark,
Jian-Yang Li,
Dathon R. Golish,
Daniella N. DellaGiustina,
Jasinghege Don P. Deshapriya,
Xian-Duan Zou,
Mike G. Daly,
Olivier S. Barnouin,
Amy A. Simon,
Dante S. Lauretta
Abstract:
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpr…
▽ More
The dark asteroid (101955) Bennu studied by NASA\textquoteright s OSIRIS-REx mission has a boulder-rich and apparently dust-poor surface, providing a natural laboratory to investigate the role of single-scattering processes in rough particulate media. Our goal is to define optical roughness and other scattering parameters that may be useful for the laboratory preparation of sample analogs, interpretation of imaging data, and analysis of the sample that will be returned to Earth. We rely on a semi-numerical statistical model aided by digital terrain model (DTM) shadow ray-tracing to obtain scattering parameters at the smallest surface element allowed by the DTM (facets of \textasciitilde{}10 cm). Using a Markov Chain Monte Carlo technique, we solved the inversion problem on all four-band images of the OSIRIS-REx mission\textquoteright s top four candidate sample sites, for which high-precision laser altimetry DTMs are available. We reconstructed the \emph{a posteriori} probability distribution for each parameter and distinguished primary and secondary solutions. Through the photometric image correction, we found that a mixing of low and average roughness slope best describes Bennu's surface for up to $90^{\circ}$ phase angle. We detected a low non-zero specular ratio, perhaps indicating exposed sub-centimeter mono-crystalline inclusions on the surface. We report an average roughness RMS slope of $27_{-5}^{\circ+1}$, a specular ratio of $2.6_{-0.8}^{+0.1}\%$, an approx. single-scattering albedo of $4.64_{-0.09}^{+0.08}\%$ at 550 nm, and two solutions for the back-scatter asymmetric factor, $ξ^{(1)}=-0.360\pm0.030$ and $ξ^{(2)}=-0.444\pm0.020$, for all four sites altogether.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Spectral clustering tools applied to Ceres in preparation for OSIRIS-REx color imaging of asteroid (101955) Bennu
Authors:
Juan Luis Rizos,
Julia de León,
Javier Licandro,
Humberto Campins,
Marcel Popescu,
Noemí Pinilla-Alonso,
Dathon Golish,
Mario de Prá,
Dante Lauretta
Abstract:
The OSIRIS-REx asteroid sample-return mission is investigating primitive near-Earth asteroid (101955) Bennu. Thousands of images will be acquired by the MapCam instrument onboard the spacecraft, an imager with four color filters based on the Eight-Color Asteroid Survey (ECAS): $b$' (473 nm), $v$ (550 nm), $w$ (698 nm), and $x$ (847 nm). This set of filters will allow identification and characteriz…
▽ More
The OSIRIS-REx asteroid sample-return mission is investigating primitive near-Earth asteroid (101955) Bennu. Thousands of images will be acquired by the MapCam instrument onboard the spacecraft, an imager with four color filters based on the Eight-Color Asteroid Survey (ECAS): $b$' (473 nm), $v$ (550 nm), $w$ (698 nm), and $x$ (847 nm). This set of filters will allow identification and characterization of the absorption band centered at 700 nm and associated with hydrated silicates. In this work, we present and validate a spectral clustering methodology for application to the upcoming MapCam images of the surface of Bennu. Our procedure starts with the projection, calibration, and photometric correction of the images. In a second step, we apply a K-means algorithm and we use the Elbow criterion to identify natural clusters. This methodology allows us to find distinct areas with spectral similarities, which are characterized by parameters such as the spectral slope $S$' and the center and depth of the 700-nm absorption band, if present. We validate this methodology using images of (1) Ceres from NASA's Dawn mission. In particular, we analyze the Occator crater and Ahuna Mons. We identify one spectral cluster--located in the outer parts of the Occator crater interior--showing the 700-nm hydration band centered at 698 $\pm$ 7 nm and with a depth of 3.4 $\pm$ 1.0 \%. We interpret this finding in the context of the crater's near-surface geology.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Overcoming the Challenges Associated with Image-based Map** of Small Bodies in Preparation for the OSIRIS-REx Mission to (101955) Bennu
Authors:
D. N. DellaGiustina,
C. A. Bennett,
K. Becker,
D. R Golish,
L. Le Corre,
D. A. Cook,
K. L. Edmundson,
M. Chojnacki,
S. S. Sutton,
M. P. Milazzo,
B. Carcich,
M. C. Nolan,
N. Habib,
K. N. Burke,
T. Becker,
P. H. Smith,
K. J. Walsh,
K. Getzandanner,
D. R. Wibben,
J. M. Leonard,
M. M. Westermann,
A. T. Polit,
J. N. Kidd Jr.,
C. W. Hergenrother,
W. V. Boynton
, et al. (16 additional authors not shown)
Abstract:
The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can re…
▽ More
The OSIRIS-REx Asteroid Sample Return Mission is the third mission in NASA's New Frontiers Program and is the first U.S. mission to return samples from an asteroid to Earth. The most important decision ahead of the OSIRIS-REx team is the selection of a prime sample-site on the surface of asteroid (101955) Bennu. Mission success hinges on identifying a site that is safe and has regolith that can readily be ingested by the spacecraft's sampling mechanism. To inform this mission-critical decision, the surface of Bennu is mapped using the OSIRIS-REx Camera Suite and the images are used to develop several foundational data products. Acquiring the necessary inputs to these data products requires observational strategies that are defined specifically to overcome the challenges associated with map** a small irregular body. We present these strategies in the context of assessing candidate sample-sites at Bennu according to a framework of decisions regarding the relative safety, sampleability, and scientific value across the asteroid's surface. To create data products that aid these assessments, we describe the best practices developed by the OSIRIS-REx team for image-based map** of irregular small bodies. We emphasize the importance of using 3D shape models and the ability to work in body-fixed rectangular coordinates when dealing with planetary surfaces that cannot be uniquely addressed by body-fixed latitude and longitude.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
OCAMS: The OSIRIS-REx Camera Suite
Authors:
B. Rizk,
C. Drouet d'Aubigny,
D. Golish,
C. Fellows,
C. Merrill,
P. Smith,
M. S. Walker,
J. E. Hendershot,
J. Hancock,
S. H. Bailey,
D. DellaGiustina,
D. Lauretta,
R. Tanner,
M. Williams,
K. Harshman,
M. Fitzgibbon,
W. Verts,
J. Chen,
T. Connors,
D. Hamara,
A. Dowd,
A. Lowman,
M. Dubin,
R. Burt,
M. Whiteley
, et al. (30 additional authors not shown)
Abstract:
The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the…
▽ More
The requirements-driven OSIRIS-REx Camera Suite (OCAMS) acquires images essential to collecting a sample from the surface of Bennu. During proximity operations, these images document the presence of satellites and plumes, record spin state, enable an accurate digital terrain model of the shape of the asteroid and identify any surface hazards. They confirm the presence of sampleable regolith on the surface, observe the sampling event itself, and image the sample head in order to verify its readiness to be stowed. They document the history of Bennu as an example of early solar system material, as a microgravity body with a planetesimal size-scale, and as a carbonaceous object. OCAMS is fitted with three cameras. The MapCam records point-source color images on approach to the asteroid in order to connect ground-based point-source observations of Bennu to later higher-resolution surface spectral imaging. The SamCam documents the sample site before, during, and after it is disturbed by the sample mechanism. The PolyCam, using its focus mechanism, observes the sample site at sub-centimeter resolutions, revealing surface texture and morphology. While their imaging requirements divide naturally between the three cameras, they preserve a strong degree of functional overlap. OCAMS and the other spacecraft instruments allow the OSIRIS-REx mission to collect a sample from a microgravity body on the same visit during which it was first optically acquired from long range, a useful capability as humanity explores near-Earth, Main-Belt and Jupiter Trojan asteroids.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
The Hertz/VPM polarimeter: Design and first light observations
Authors:
Megan Krejny,
David Chuss,
Christian Drouet d'Aubigny,
Dathon Golish,
Martin Houde,
Howard Hui,
Craig Kulesa,
Robert F. Loewenstein,
S. Harvey Moseley,
Giles Novak,
George Voellmer,
Chris Walker,
Ed Wollack
Abstract:
We present first results of Hertz/VPM, the first submillimeter polarimeter employing the dual Variable-delay Polarization Modulator (dual-VPM). This device differs from previously used polarization modulators in that it operates in translation rather than mechanical rotation. We discuss the basic theory behind this device, and its potential advantages over the commonly used half wave plate (HWP)…
▽ More
We present first results of Hertz/VPM, the first submillimeter polarimeter employing the dual Variable-delay Polarization Modulator (dual-VPM). This device differs from previously used polarization modulators in that it operates in translation rather than mechanical rotation. We discuss the basic theory behind this device, and its potential advantages over the commonly used half wave plate (HWP). The dual-VPM was tested both at the Submillimeter Telescope Observatory (SMTO) and in the lab. In each case we present a detailed description of the setup. We discovered nonideal behavior in the system. This is at least in part due to properties of the VPM wire grids (diameter, spacing) employed in our experiment. Despite this, we found that the dual-VPM system is robust, operating with high efficiency and low instrumental polarization. This device is well suited for air and space-borne applications.
△ Less
Submitted 26 March, 2008;
originally announced March 2008.
-
SuperCam, a 64-pixel heterodyne imaging array for the 870 micron atmospheric window
Authors:
Christopher Groppi,
Christopher Walker,
Craig Kulesa,
Patrick Puetz,
Dathon Golish,
Paul Gensheimer,
Abigail Hedden,
Shane Bussmann,
Sander Weinreb,
Thomas Kuiper,
Jacob Kooi,
Glenn Jones,
Joseph Bardin,
Hamdi Mani,
Arthur Lichtenberger,
Gopal Narayanan
Abstract:
We report on the development of SuperCam, a 64 pixel, superheterodyne camera designed for operation in the astrophysically important 870 micron atmospheric window. SuperCam will be used to answer fundamental questions about the physics and chemistry of molecular clouds in the Galaxy and their direct relation to star and planet formation. The advent of such a system will provide an order of magni…
▽ More
We report on the development of SuperCam, a 64 pixel, superheterodyne camera designed for operation in the astrophysically important 870 micron atmospheric window. SuperCam will be used to answer fundamental questions about the physics and chemistry of molecular clouds in the Galaxy and their direct relation to star and planet formation. The advent of such a system will provide an order of magnitude increase in map** speed over what is now available and revolutionize how observational astronomy is performed in this important wavelength regime. Unlike the situation with bolometric detectors, heterodyne receiver systems are coherent, retaining information about both the amplitude and phase of the incident photon stream. From this information a high resolution spectrum of the incident light can be obtained without multiplexing. SuperCam will be constructed by stacking eight, 1x8 rows of fixed tuned, SIS mixers. The IF output of each mixer will be connected to a low-noise, broadband MMIC amplifier integrated into the mixer block. The instantaneous IF bandwidth of each pixel will be ~2 GHz, with a center frequency of 5 GHz. A spectrum of the central 500 MHz of each IF band will be provided by the array spectrometer. Local oscillator power is provided by a frequency multiplier whose output is divided between the pixels by using a matrix of waveguide power dividers. The mixer array will be cooled to 4K by a closed-cycle refrigeration system. SuperCam will reside at the Cassegrain focus of the 10m Heinrich Hertz telescope (HHT). A prototype single row of the array will be tested on the HHT in 2006, with the first engineering run of the full array in late 2007. The array is designed and constructed so that it may be readily scaled to higher frequencies.
△ Less
Submitted 2 June, 2006;
originally announced June 2006.