-
The SPARC Toroidal Field Model Coil Program
Authors:
Zachary Hartwig,
Rui Vieira,
Darby Dunn,
Theodore Golfinopoulos,
Brian LaBombard,
Christopher Lammi,
Phil Michael,
Susan Agabian,
David Arsenault,
Raheem Barnett,
Mike Barry,
Larry Bartoszek,
William Beck,
David Bellofatto,
Daniel Brunner,
William Burke,
Jason Burrows,
William Byford,
Charles Cauley,
Sarah Chamberlain,
David Chavarria,
JL Cheng,
James Chicarello,
Karen Cote,
Corinne Cotta
, et al. (75 additional authors not shown)
Abstract:
The SPARC Toroidal Field Model Coil (TFMC) Program was a three-year effort between 2018 and 2021 that developed novel Rare Earth Yttrium Barium Copper Oxide (REBCO) superconductor technologies and then successfully utilized these technologies to design, build, and test a first-in-class, high-field (~20 T), representative-scale (~3 m) superconducting toroidal field coil. With the principal objectiv…
▽ More
The SPARC Toroidal Field Model Coil (TFMC) Program was a three-year effort between 2018 and 2021 that developed novel Rare Earth Yttrium Barium Copper Oxide (REBCO) superconductor technologies and then successfully utilized these technologies to design, build, and test a first-in-class, high-field (~20 T), representative-scale (~3 m) superconducting toroidal field coil. With the principal objective of demonstrating mature, large-scale, REBCO magnets, the project was executed jointly by the MIT Plasma Science and Fusion Center (PSFC) and Commonwealth Fusion Systems (CFS). The TFMC achieved its programmatic goal of experimentally demonstrating a large-scale high-field REBCO magnet, achieving 20.1 T peak field-on-conductor with 40.5 kA of terminal current, 815 kN/m of Lorentz loading on the REBCO stacks, and almost 1 GPa of mechanical stress accommodated by the structural case. Fifteen internal demountable pancake-to-pancake joints operated in the 0.5 to 2.0 nOhm range at 20 K and in magnetic fields up to 12 T. The DC and AC electromagnetic performance of the magnet, predicted by new advances in high-fidelity computational models, was confirmed in two test campaigns while the massively parallel, single-pass, pressure-vessel style coolant scheme capable of large heat removal was validated. The REBCO current lead and feeder system was experimentally qualified up to 50 kA, and the crycooler based cryogenic system provided 600 W of cooling power at 20 K with mass flow rates up to 70 g/s at a maximum design pressure of 20 bar-a for the test campaigns. Finally, the feasibility of using passive, self-protection against a quench in a fusion-scale NI TF coil was experimentally assessed with an intentional open-circuit quench at 31.5 kA terminal current.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
On the synergy between easier plasma operation and affordable coil-set requirements enabled by Negative Triangularity in the prospective ARC fusion reactor
Authors:
Nicolai de Boucaud,
Theodore Golfinopoulos,
Alessandro Marinoni
Abstract:
A numerical workflow is developed to explore the viability of running multiple plasma configurations in the ARC fusion pilot plant. Suitable cost functions for various poloidal field coil sets are evaluated based on currents required in the coils, induced stresses, and flexibility in plasma configurations. It is shown, for the first time, that a given set of poloidal field coils can sustain equili…
▽ More
A numerical workflow is developed to explore the viability of running multiple plasma configurations in the ARC fusion pilot plant. Suitable cost functions for various poloidal field coil sets are evaluated based on currents required in the coils, induced stresses, and flexibility in plasma configurations. It is shown, for the first time, that a given set of poloidal field coils can sustain equilibria with both signs of triangularity and that equilibria at Negative Triangularity have comparable coil requirements to those at Positive Triangularity, despite ARC's Positive Triangularity design equilibrium. These results contribute to demonstrate that the Negative Triangularity Tokamak is a promising candidate for the commercialization of fusion power.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
X-point and divertor filament dynamics from Gas Puff Imaging on TCV
Authors:
Curdin Wüthrich,
Christian Theiler,
Nicola Offeddu,
Davide Galassi,
Diego Sales de Oliveira,
Basil Duval,
Olivier Février,
Theodore Golfinopoulos,
Woonghee Han,
Earl Marmar,
Jim Terry,
Cedric Tsui
Abstract:
A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of inte…
▽ More
A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode, attached, lower single-null discharges shows that statistical properties have little poloidal variations, while vast differences are present in the 2D behaviour of intermittent filaments. Strongly elongated filaments, just above the X-point and in the divertor far-SOL, show a good consistency in shape and dynamics with field-line tracing from filaments at the outboard midplane, highlighting their connection. In the near-SOL of the outer divertor leg, shortlived, high frequency and more circular (diameter $\sim$15 sound Larmour radii) filaments are observed. These divertor-localised filaments appear born radially at the position of maximum density and display a radially outward motion with velocity $\approx$400\,m/s that is comparable to radial velocities of upstream-connected filaments. Conversely, in these discharges ($B\times\nabla B$ pointing away from the divertor), these divertor filaments' poloidal velocities differ strongly from those of upstream-connected filaments. The importance of divertor-localised filaments upon radial transport and profile broadening is explored using filament statistics and in-situ kinetic profile measurements along the divertor leg. This provides evidence that these filaments contribute significantly to electron density profile broadening in the divertor.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Tracking Blobs in the Turbulent Edge Plasma of a Tokamak Fusion Device
Authors:
Woonghee Han,
Randall A. Pietersen,
Rafael Villamor-Lora,
Matthew Beveridge,
Nicola Offeddu,
Theodore Golfinopoulos,
Christian Theiler,
James L. Terry,
Earl S. Marmar,
Iddo Drori
Abstract:
The analysis of turbulence in plasmas is fundamental in fusion research. Despite extensive progress in theoretical modeling in the past 15 years, we still lack a complete and consistent understanding of turbulence in magnetic confinement devices, such as tokamaks. Experimental studies are challenging due to the diverse processes that drive the high-speed dynamics of turbulent phenomena. This work…
▽ More
The analysis of turbulence in plasmas is fundamental in fusion research. Despite extensive progress in theoretical modeling in the past 15 years, we still lack a complete and consistent understanding of turbulence in magnetic confinement devices, such as tokamaks. Experimental studies are challenging due to the diverse processes that drive the high-speed dynamics of turbulent phenomena. This work presents a novel application of motion tracking to identify and track turbulent filaments in fusion plasmas, called blobs, in a high-frequency video obtained from Gas Puff Imaging diagnostics. We compare four baseline methods (RAFT, Mask R-CNN, GMA, and Flow Walk) trained on synthetic data and then test on synthetic and real-world data obtained from plasmas in the Tokamak `a Configuration Variable (TCV). The blob regime identified from an analysis of blob trajectories agrees with state-of-the-art conditional averaging methods for each of the baseline methods employed, giving confidence in the accuracy of these techniques. High entry barriers traditionally limit tokamak plasma research to a small community of researchers in the field. By making a dataset and benchmark publicly available, we hope to open the field to a broad community in science and engineering.
△ Less
Submitted 10 August, 2022; v1 submitted 16 November, 2021;
originally announced November 2021.
-
I-mode pedestal relaxation events in the Alcator C-Mod and ASDEX Upgrade tokamaks
Authors:
D. Silvagni,
J. L. Terry,
W. McCarthy,
A. E. Hubbard,
T. Eich,
M. Faitsch,
L. Gil,
T. Golfinopoulos,
G. Grenfell,
M. Griener,
T. Happel,
J. W. Hughes,
U. Stroth,
E. Viezzer,
the ASDEX Upgrade team,
the EUROfusion MST1 team
Abstract:
In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mod…
▽ More
In some conditions, I-mode plasmas can feature pedestal relaxation events (PREs) that transiently enhance the energy reaching the divertor target plates. To shed light into their appearance, characteristics and energy reaching the divertor targets, a comparative study between two tokamaks $-$ Alcator C-Mod and ASDEX Upgrade $-$ is carried out. It is found that PREs appear only in a subset of I-mode discharges, mainly when the plasma is close to the H-mode transition. Also, the nature of the triggering instability is discussed by comparing measurements close to the separatrix in both devices. The PRE relative energy loss from the confined region increases with decreasing pedestal top collisionality $ν_{\mathrm{ped}}^*$. In addition, the relative electron temperature drop at the pedestal top, which is related to the conductive energy loss, rises with decreasing $ν_{\mathrm{ped}}^*$. Finally, the peak parallel energy fluence due to the PRE measured on the divertor in both devices is compared to the model introduced in [1] for type-I ELMs. The model is shown to provide an upper boundary for PRE energy fluence data, while a lower boundary is found by dividing the model by three. These two boundaries are used to make projections to future devices such as DEMO and ARC.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.