Showing 1–46 of 46 results for author: Goldie, J

Superconducting Microwave Detector Technology for Ultra-Light Dark Matter Haloscopes and other Fundamental Physics Experiments: Device Physics (Part II)

Authors: David J. Goldie, Stafford Withington, Christopher N. Thomas

Abstract: We consider and compare candidate superconducting detector technologies that might be applied to the readout of cavity-axion haloscopes and similar fundamental physics experiments. We conclude that a transition edge sensor (TES) configured with ballistic-phonon thermal isolation operated with a superconducting transition temperature of order 30 mK would provide quantum-limited detection performanc… ▽ More We consider and compare candidate superconducting detector technologies that might be applied to the readout of cavity-axion haloscopes and similar fundamental physics experiments. We conclude that a transition edge sensor (TES) configured with ballistic-phonon thermal isolation operated with a superconducting transition temperature of order 30 mK would provide quantum-limited detection performance at frequencies above 5 GHz. This would permit the realisation of integrated homodyne detectors based on TESs that we believe would make a unique contribution to a variety of fundamental physics experiments, particularly those based on reading out microwave cavities in the quantum ground state. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 44 pages 18 figures

Superconducting Microwave Detector Technology for Ultra-Light Dark Matter Haloscopes and other Fundamental Physics Experiments: Background Theory (Part I)

Authors: Christopher N. Thomas, Stafford Withington, David J. Goldie

Abstract: We consider how superconducting microwave detector technology might be applied to the readout of cavity-axion haloscopes and similar fundamental physics experiments. Expressions for the sensitivity of two detection schemes are derived: 1) a dispersive spectrometer, and 2) a direct-conversion/homodyne receiver using detectors as mixing elements. In both cases the semi-classical/Poisson-mixture appr… ▽ More We consider how superconducting microwave detector technology might be applied to the readout of cavity-axion haloscopes and similar fundamental physics experiments. Expressions for the sensitivity of two detection schemes are derived: 1) a dispersive spectrometer, and 2) a direct-conversion/homodyne receiver using detectors as mixing elements. In both cases the semi-classical/Poisson-mixture approach is used to account for quantum effects. Preliminary sensitivity calculations are performed to guide future development work. These suggest the homodyne scheme offers a near-term solution for realising near-quantum-noise limited receivers with improved usability compared with parametric amplifiers. Similarly, they show that the dispersive spectrometer offers a potential way to beat the quantum noise limit, but that significant technological development work is needed to do so. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 70 pages with 7 figures

Electron Spectroscopy using Transition-Edge Sensors

Authors: K. M. Patel, S. Withington, A. G . Shard, D. J. Goldie, C. N. Thomas

Abstract: Transition-edge sensors (TESs) have the potential to perform electron spectroscopic measurements with far greater measurement rates and efficiencies than can be achieved using existing electron spectrometers. Existing spectrometers filter electrons by energy before detecting a narrow energy band at a time, discarding the vast majority of electrons available for measurement. In contrast, transition… ▽ More Transition-edge sensors (TESs) have the potential to perform electron spectroscopic measurements with far greater measurement rates and efficiencies than can be achieved using existing electron spectrometers. Existing spectrometers filter electrons by energy before detecting a narrow energy band at a time, discarding the vast majority of electrons available for measurement. In contrast, transition-edge sensors (TES) have intrinsic energy sensitivity and so do not require prior filtering to perform energy-resolved measurements. Despite this fundamental advantage, TES electron spectroscopy has not, to our knowledge, previously been reported in the literature. We present the results of a set of proof-of-principle experiments demonstrating TES electron spectroscopy experiments using Mo/Au TESs repurposed for electron calorimetry. Using these detectors, we successfully measured the electron spectrum generated by an electron beam striking a graphite target with energies between 750 and 2000 eV, at a noise-limited energy resolution of 4 eV. Based on the findings of these experiments, we suggest improvements that could be made to TES design to enhance their electron detection capabilities through the use of of a dedicated electron absorber in the device with integrated electron optics. △ Less

Submitted 2 March, 2024; originally announced March 2024.

Comments: 8 pages, 6 figures

Magnetic Field Sensitivity of Transition Edge Sensors

Authors: R. C. Harwin, D. J. Goldie, C. N. Thomas, S. Withington

Abstract: Understanding the magnetic field sensitivity of Transition Edge Sensors (TESs) is vital in optimising the configuration of any magnetic shielding as well as the design of the TESs themselves. An experimental system has been developed to enable the investigation of the applied magnetic field direction on TES behaviour, and the first results from this system are presented. In addition, measurements… ▽ More Understanding the magnetic field sensitivity of Transition Edge Sensors (TESs) is vital in optimising the configuration of any magnetic shielding as well as the design of the TESs themselves. An experimental system has been developed to enable the investigation of the applied magnetic field direction on TES behaviour, and the first results from this system are presented. In addition, measurements of the effect of applied magnetic field magnitude on both supercurrent and bias current are presented. The extent to which the current theoretical framework can explain the results is assessed and finally, the impact of this work on the design of TESs and the design of magnetic shielding is discussed. △ Less

Submitted 1 October, 2023; originally announced October 2023.

Sensitivity of Transition-Edge Sensors to Strong DC Electric Fields

Authors: K. M. Patel, D. J. Goldie, S. Withington, C. N. Thomas

Abstract: Transition-edge sensors (TESs) have found a wide range of applications in both space- and land-based astronomical photon measurement and are being used in the search for dark matter and neutrino mass measurements. A fundamental aspect of TES physics that has not been investigated is the sensitivity of TESs to strong DC electric fields (10 kV/m and above). Understanding the resilience of TESs to DC… ▽ More Transition-edge sensors (TESs) have found a wide range of applications in both space- and land-based astronomical photon measurement and are being used in the search for dark matter and neutrino mass measurements. A fundamental aspect of TES physics that has not been investigated is the sensitivity of TESs to strong DC electric fields (10 kV/m and above). Understanding the resilience of TESs to DC electric fields is essential when considering their use as charged particle spectrometers, a field in which TESs could have an enormous impact. Techniques such as x-ray photoelectron spectroscopy produce a high number of low-energy electrons that are not of interest and can be screened from the detector using electrostatic deflection. The use of strong electric fields could also provide a mass-efficient route to prevent secondary electron measurements arising from cosmic radiation in space-based TES applications. Integrating electron optics into the TES membrane provides an elegant and compact means to control the interaction between charged particles and the sensor, whether by screening unwanted particles or enhancing the particle absorption efficiency but implementing such techniques requires understanding the sensitivity of the TES to the resulting electric fields. In this work, we applied a uniform DC electric field across a Mo/Au TES using a parallel pair of flat electrodes positioned above and below the TES. The electric field in the vicinity of the TES was enhanced by the presence of silicon backing plate directly beneath the TES. Using this arrangement, we were able to apply of electric fields up to 90 kV/m across the TES. We observed no electric field sensitivity at any field strength demonstrating the capability to use TESs in environments of strong electric fields. △ Less

Submitted 10 May, 2023; originally announced May 2023.

A Route to Large-Scale Ultra-Low Noise Detector Arrays for Far-Infrared Space Applications

Authors: D J Goldie, S. Withington, C. N. Thomas, P. A. R. Ade, R. V. Sudiwala

Abstract: Far-infrared detectors for future cooled space telescopes require ultra-sensitive detectors with optical noise equivalent powers of order 0.2 aW/\sqrt Hz. This performance has already been demonstrated in arrays of transition edge sensors. A critical step is demonstrating a method of fabrication and assembly that maintains the performance but that is extendable to create large-scale arrays suitabl… ▽ More Far-infrared detectors for future cooled space telescopes require ultra-sensitive detectors with optical noise equivalent powers of order 0.2 aW/\sqrt Hz. This performance has already been demonstrated in arrays of transition edge sensors. A critical step is demonstrating a method of fabrication and assembly that maintains the performance but that is extendable to create large-scale arrays suitable, for example, for application in dispersive spectrometers where it may be advantageous to fabricate the array from smaller sub-arrays. Critical here are the methods of assembly and metrology that maintain the required tolerances on the spatial alignment of the components in order to maintain overall performance. These are discussed and demonstrated. △ Less

Submitted 30 June, 2022; originally announced June 2022.

Comments: 10 pages 8 figures

Implementation of FAIR principles in the IPCC: The WGI AR6 Atlas repository

Authors: Maialen Iturbide, Jesús Fernández, José M. Gutiérrez, Anna Pirani, David Huard, Alaa Al Khourdajie, Jorge Baño-Medina, Joaquin Bedia, Ana Casanueva, Ezequiel Cimadevilla, Antonio S. Cofiño, Matteo De Felice, Javier Diez-Sierra, Markel García-Díez, James Goldie, Dimitris A. Herrera, Sixto Herrera, Rodrigo Manzanas, Josipa Milovac, Aparna Radhakrishnan, Daniel San-Martín, Alessandro Spinuso, Kristen Thyng, Claire Trenham, Özge Yelekçi

Abstract: The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. The Atlas chapter of Working Group I (WGI) is presented as a test case. Here, we describe the application of these principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We present the open source repository resul… ▽ More The Sixth Assessment Report (AR6) of the Intergovernmental Panel on Climate Change (IPCC) has adopted the FAIR Guiding Principles. The Atlas chapter of Working Group I (WGI) is presented as a test case. Here, we describe the application of these principles in the Atlas, the challenges faced during its implementation, and those that remain for the future. We present the open source repository resulting from this process, which collects the code (including annotated Jupyter notebooks), data provenance, and some aggregated datasets underpinning the key figures in the Atlas chapter and its interactive companion (the Interactive Atlas), open to scrutiny by the scientific community and the general public. We describe the informal pilot review conducted on this repository to gather recommendations that led to significant improvements. Finally, a working example illustrates the use of the repository to produce customized regional information, extending the Interactive Atlas products and running the code interactively in a web browser using Jupyter notebooks. Atlas repository: doi:10.5281/zenodo.5171760. △ Less

Submitted 29 April, 2022; originally announced April 2022.

Comments: 18 pages, 3 figures and 1 table. Submitted to Scientific Data; currently under peer review

Simulation Method for Investigating the Use of Transition-Edge Sensors as Spectroscopic Electron Detectors

Authors: K. M. Patel, S. Withington, C. N. Thomas, A. G. Shard, D. J. Goldie

Abstract: Transition-edge sensors (TESs) are capable of highly accurate single particle energy measurement. TESs have been used for a wide range of photon detection applications, particularly in astronomy, but very little consideration has been given to their capabilities as electron calorimeters. Existing electron spectrometers require electron filtering optics to achieve energy discrimination, but this st… ▽ More Transition-edge sensors (TESs) are capable of highly accurate single particle energy measurement. TESs have been used for a wide range of photon detection applications, particularly in astronomy, but very little consideration has been given to their capabilities as electron calorimeters. Existing electron spectrometers require electron filtering optics to achieve energy discrimination, but this step discards the vast majority of electrons entering the instrument. TESs require no such energy filtering, meaning they could provide orders of magnitude improvement in measurement rate. To investigate the capabilities of TESs in electron spectroscopy, a simulation pipeline has been devised. The pipeline allows the results of a simulated experiment to be compared with the actual spectrum of the incident beam, thereby allowing measurement accuracy and efficiency to be studied. Using Fisher information, the energy resolution of the simulated detectors was also calculated, allowing the intrinsic limitations of the detector to be separated from the specific data analysis method used. The simulation platform has been used to compare the performance of TESs with existing X-ray photoelectron spectroscopy (XPS) analysers. TESs cannot match the energy resolution of XPS analysers for high-precision measurements but have comparable or better resolutions for high count rate applications. The measurement rate of a typical XPS analyser can be matched by an array of 10 TESs with 120 microsecond response times and there is significant scope for improvement, without compromising energy resolution, by increasing array size. △ Less

Submitted 24 June, 2021; originally announced June 2021.

Comments: 9 pages, 3 figures

Journal ref: Supercond. Sci. Technol. (2021) 34 125007

Characterising the optical response of ultra-low-noise far-infrared 60-110 $μ$m transition edge sensors

Authors: Emily A. Williams, Stafford Withington, David J. Goldie, Christopher N. Thomas, Peter A. R. Ade, Rashmi Sudiwala

Abstract: Far-infrared Transition Edge Sensors (TESs) are being developed for the SAFARI grating spectrometer on the cooled-aperture space telescope SPICA. In support of this work, we have devised a cryogenic (90 mK) test facility for carrying out precision optical measurements on ultra-low-noise TESs. Although our facility is suitable for the whole of the SAFARI wavelength range, 34-230 $μ$m, we focus on a… ▽ More Far-infrared Transition Edge Sensors (TESs) are being developed for the SAFARI grating spectrometer on the cooled-aperture space telescope SPICA. In support of this work, we have devised a cryogenic (90 mK) test facility for carrying out precision optical measurements on ultra-low-noise TESs. Although our facility is suitable for the whole of the SAFARI wavelength range, 34-230 $μ$m, we focus on a representative set of measurements at 60-110 $μ$m using a device having a Noise Equivalent Power (NEP) of 0.32 $\mathrm{aW/\sqrt{Hz}}$. The system is able to perform a range of measurements: (i) Dark electrical characterisation. (ii) Optical efficiency with respect to a partially coherent beam having a modal composition identical to that of an ideal imaging telescope. (iii) Optical saturation and dynamic range. (iv) Fast optical transient response to a modulated thermal source. (v) Optical transient response in the presence of high-level background loading. We describe dark measurements to determine the operating characteristics of a TES, and then compare predicted optical behaviour with measured optical behaviour. By comparing electrical and optical transient response, we were able to observe thermalisation in the device. We comment on the challenge of eliminating stray light. △ Less

Submitted 19 August, 2020; originally announced August 2020.

Suppressed-gap millimetre wave kinetic inductance detectors using DC-bias current

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: In this study, we evaluate the suitability of using DC-biased aluminium resonators as low-frequency kinetic inductance detectors operating in the frequency range of 50 - 120 GHz. Our analysis routine for supercurrent-biased resonators is based on the Usadel equations and gives outputs including density of states, complex conductivities, transmission line properties, and quasiparticle lifetimes. Re… ▽ More In this study, we evaluate the suitability of using DC-biased aluminium resonators as low-frequency kinetic inductance detectors operating in the frequency range of 50 - 120 GHz. Our analysis routine for supercurrent-biased resonators is based on the Usadel equations and gives outputs including density of states, complex conductivities, transmission line properties, and quasiparticle lifetimes. Results from our analysis confirm previous experimental observations on resonant frequency tuneability and retention of high quality factor. Crucially, our analysis suggests that DC-biased resonators demonstrate significantly suppressed superconducting density of states gap. Consequently these resonators have lower frequency detection threshold and are suitable materials for low-frequency kinetic inductance detectors. △ Less

Submitted 28 March, 2020; v1 submitted 24 January, 2020; originally announced January 2020.

First Characterization of a Superconducting Filter-bank Spectrometer for Hyper-spectral Microwave Atmospheric Sounding with Transition Edge Sensors

Authors: D. J. Goldie, C. N. Thomas, S. Withington, A. Orlando, R. Sudiwala, P. Hargrave, P. K. Dongre

Abstract: We describe the design, fabrication, integration and characterization of a prototype superconducting filter bank with transition edge sensor readout designed to explore millimetre-wave detection at frequencies in the range 40 to 65 GHz. Results indicate highly uniform filter channel placement in frequency and high overall detection efficiency. The route to a full atmospheric sounding instrument in… ▽ More We describe the design, fabrication, integration and characterization of a prototype superconducting filter bank with transition edge sensor readout designed to explore millimetre-wave detection at frequencies in the range 40 to 65 GHz. Results indicate highly uniform filter channel placement in frequency and high overall detection efficiency. The route to a full atmospheric sounding instrument in this frequency range is discussed. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Comments: 13 pages, 12 figures

Nonlinear Effects in Superconducting Thin Film Microwave Resonators

Authors: Christopher N Thomas, Stafford Withington, Zhenyuan Sun, Tess Skyrme, David J. Goldie

Abstract: We discuss how reactive and dissipative non-linearities affect the intrinsic response of superconducting thin-film resonators. We explain how most, if not all, of the complex phenomena commonly seen can be described by a model in which the underlying resonance is a single-pole Lorentzian, but whose centre frequency and quality factor change as external parameters, such as readout power and frequen… ▽ More We discuss how reactive and dissipative non-linearities affect the intrinsic response of superconducting thin-film resonators. We explain how most, if not all, of the complex phenomena commonly seen can be described by a model in which the underlying resonance is a single-pole Lorentzian, but whose centre frequency and quality factor change as external parameters, such as readout power and frequency, are varied. What is seen during a vector-network-analyser measurement is series of samples taken from an ideal Lorentzian that is shifting and spreading as the readout frequency is changed. According to this model, it is perfectly proper to refer to, and measure, the resonant frequency and quality factor of the underlying resonance, even though the swept-frequency curves appear highly distorted and hysteretic. In those cases where the resonance curve is highly distorted, the specific shape of the trajectory in the Argand plane gives valuable insights into the second-order physical processes present. We discuss the formulation and consequences of this approach in the case of non-linear kinetic inductance, two-level-system loss, quasiparticle generation, and a generic model based on a power-law form. The generic model captures the key features of specific dissipative non-linearities, but additionally leads to insights into how general dissipative processes create characteristic forms in the Argand plane. We provide detailed formulations in each case, and indicate how they lead to the wide variety of phenomena commonly seen in experimental data. We also explain how the properties of the underlying resonance can be extracted from this data. Overall, our paper provides a self-contained compendium of behaviour that will help practitioners interpret and determine important parameters from distorted swept-frequency measurements. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: 55 pages, 15 figures

Nonlinear Properties of Supercurrent-Carrying Single and Multi-Layer Thin-Film Superconductors

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: Superconducting thin-films are central to the operation of many kinds of quantum sensors and quantum computing devices: Kinetic Inductance Detectors (KIDs), Travelling-Wave Parametric Amplifiers (TWPAs), Qubits, and Spin-based Quantum Memory elements. In all cases, the nonlinearity resulting from the supercurrent is a critical aspect of behaviour, either because it is central to the operation of t… ▽ More Superconducting thin-films are central to the operation of many kinds of quantum sensors and quantum computing devices: Kinetic Inductance Detectors (KIDs), Travelling-Wave Parametric Amplifiers (TWPAs), Qubits, and Spin-based Quantum Memory elements. In all cases, the nonlinearity resulting from the supercurrent is a critical aspect of behaviour, either because it is central to the operation of the device (TWPA), or because it results in non-ideal second-order effects (KID). Here we present an analysis of supercurrent carrying superconducting thin-films that is based on the generalized Usadel equations. Our analysis framework is suitable for both homogeneous and multilayer thin-films, and can be used to calculate the resulting density of states, superconducting transition temperature, superconducting critical current, complex conductivities, complex surface impedances, transmission line propagation constants, and nonlinear kinetic inductances in the presence of supercurrent. Our analysis gives the scale of kinetic inductance nonlinearity (I*) for a given material combination and geometry, and is important in optimizing the design of detectors and amplifiers in terms of materials, geometries, and dimensions. To investigate the validity of our analysis across a wide range of supercurrent, we have measured the transition temperatures of superconducting thin-films as a function of DC supercurrent. These measurements show good agreement with our theoretical predictions in the experimentally relevant range of current values. △ Less

Submitted 17 December, 2019; v1 submitted 18 July, 2019; originally announced July 2019.

Journal ref: J Low Temp Phys (2020)

Loss and Saturation in Superconducting Travelling-Wave Parametric Amplifiers

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: We have developed a coupled-mode analysis framework for superconducting travelling-wave parametric amplifiers using the full Telegrapher's equations to incorporate loss-related behaviour. Our model provides an explanation of previous experimental observations regarding loss in amplifiers, advantages of concatenating amplifiers to achieve high gains, and signal gain saturation. This work can be use… ▽ More We have developed a coupled-mode analysis framework for superconducting travelling-wave parametric amplifiers using the full Telegrapher's equations to incorporate loss-related behaviour. Our model provides an explanation of previous experimental observations regarding loss in amplifiers, advantages of concatenating amplifiers to achieve high gains, and signal gain saturation. This work can be used to guide the design of amplifiers in terms of the choice of material systems, transmission line geometry, operating conditions, and pump strength. △ Less

Submitted 16 April, 2019; originally announced April 2019.

Journal ref: Journal of Physics D: Applied Physics, 52 (2019) 415301

Calculation and measurement of critical temperature in thin superconducting multilayers

Authors: Songyuan Zhao, David J. Goldie, Chris N. Thomas, Stafford Withington

Abstract: We have applied the Usadel equations to thin-film multilayer superconductors, and have calculated the critical temperature for general thin-film S-S' bilayer. We extended the bilayer calculation to general thin-film multilayers. The model demonstrates excellent fit with experimental data obtained from Ti-Al bilayers of varying thicknesses. We have applied the Usadel equations to thin-film multilayer superconductors, and have calculated the critical temperature for general thin-film S-S' bilayer. We extended the bilayer calculation to general thin-film multilayers. The model demonstrates excellent fit with experimental data obtained from Ti-Al bilayers of varying thicknesses. △ Less

Submitted 4 August, 2018; v1 submitted 28 May, 2018; originally announced May 2018.

Journal ref: Superconductor Science and Technology, 31 (2018) 105004

Superconducting transition edge sensors with phononic thermal isolation

Authors: Emily A. Williams, Stafford Withington, Christopher N. Thomas, David J. Goldie, Djelal Osman

Abstract: The sensitivity of a low-noise superconducting transition edge sensor (TES) is determined by the thermal conductance of the support structure that connects the active elements of the device to the heat bath. Low-noise devices require conductances in the range 0.1 to 10 pWK$^{-1}$, and so have to rely on diffusive phonon scattering in long, narrow, amorphous SiN$_\text{x}$ legs. We show that it is… ▽ More The sensitivity of a low-noise superconducting transition edge sensor (TES) is determined by the thermal conductance of the support structure that connects the active elements of the device to the heat bath. Low-noise devices require conductances in the range 0.1 to 10 pWK$^{-1}$, and so have to rely on diffusive phonon scattering in long, narrow, amorphous SiN$_\text{x}$ legs. We show that it is possible to manufacture and operate TESs having short, ballistic low-dimensional legs (cross section 500$\times$200 nm) that contain multi-element phononic interferometers and ring resonators. These legs transport heat in effectively just 5 elastic modes at the TES's operating temperature (< 150 mK), which is close to the quantised limit of 4. The phononic filters then reduce the thermal flux further by frequency-domain filtering. For example, a micromachined 3-element ring resonator reduced the flux to 19 % of a straight-legged ballistic device operating at the quantised limit, and 38 % of a straight-legged diffusive reference device. This work opens the way to manufacturing TESs where performance is determined entirely by filtered, few-mode, ballistic thermal transport in short, low-heat capacity legs, free from the artifacts of two level systems. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: 11 pages, 8 figures

Proximity effect model for x-ray Transition Edge Sensors

Authors: R. C. Harwin, D. J. Goldie, S. Withington, P. Khosropanah, L. Gottardi, J. -R. Gao

Abstract: Transition Edge Sensors are ultra-sensitive superconducting detectors with applications in many areas of research, including astrophysics. The device consists of a superconducting thin film, often with additional normal metal features, held close to its transition temperature and connected to two superconducting leads of a higher transition temperature. There is currently no way to reliably assess… ▽ More Transition Edge Sensors are ultra-sensitive superconducting detectors with applications in many areas of research, including astrophysics. The device consists of a superconducting thin film, often with additional normal metal features, held close to its transition temperature and connected to two superconducting leads of a higher transition temperature. There is currently no way to reliably assess the performance of a particular device geometry or material composition without making and testing the device. We have developed a proximity effect model based on the Usadel equations to predict the effects of device geometry and material composition on sensor performance. The model is successful in reproducing I-V curves for two devices currently under study. We use the model to suggest the optimal size and geometry for TESs, considering how small the devices can be made before their performance is compromised. In the future, device modelling prior to manufacture will reduce the need for time-consuming and expensive testing. △ Less

Submitted 17 May, 2018; v1 submitted 16 May, 2018; originally announced May 2018.

Electromagnetic models for multilayer superconducting transmission lines

Authors: Songyuan Zhao, Stafford Withington, David J. Goldie, Chris N. Thomas

Abstract: Thin-film superconducting transmission lines play important roles in many signal transmission and detection systems, including qubit coupling and read-out schemes, electron spin resonance systems, parametric amplifiers, and various ultra high sensitivity detectors. Here we present a rigorous method for computing the electromagnetic behaviour of superconducting microstrip transmission lines and cop… ▽ More Thin-film superconducting transmission lines play important roles in many signal transmission and detection systems, including qubit coupling and read-out schemes, electron spin resonance systems, parametric amplifiers, and various ultra high sensitivity detectors. Here we present a rigorous method for computing the electromagnetic behaviour of superconducting microstrip transmission lines and coplanar waveguides. Our method is based on conformal map**, and is suitable for both homogeneous superconductors and proximity-coupled multilayers. We also present an effective conductivity approximation of multilayers, thereby allowing the multilayers to be analysed using existing electromagnetic design software. We compute the numerical results for Al-Ti bilayers and discuss the validity of our full computation and homogeneous approximation. △ Less

Submitted 29 June, 2018; v1 submitted 12 March, 2018; originally announced March 2018.

Journal ref: Superconductor Science and Technology, 31 (2018) 085012

Exploring the performance of thin-film superconducting multilayers as Kinetic Inductance Detectors for low-frequency detection

Authors: Songyuan Zhao, David J. Goldie, Stafford Withington, Chris N. Thomas

Abstract: We have solved numerically the diffusive Usadel equations that describe the spatially-varying superconducting proximity effect in Ti-Al thin-film bi- and trilayers with thickness values that are suitable for Kinetic Inductance Detectors (KIDs) to operate as photon detectors with detection thresholds in the frequency range of 50-90 GHz. Using Nam's extension of the Mattis-Bardeen calculation of the… ▽ More We have solved numerically the diffusive Usadel equations that describe the spatially-varying superconducting proximity effect in Ti-Al thin-film bi- and trilayers with thickness values that are suitable for Kinetic Inductance Detectors (KIDs) to operate as photon detectors with detection thresholds in the frequency range of 50-90 GHz. Using Nam's extension of the Mattis-Bardeen calculation of the superconductor complex conductivity, we show how to calculate the surface impedance for the spatially varying case, and hence the surface impedance quality factor. In addition, we calculate energy-and spatially-averaged quasiparticle lifetimes at temperatures well-below the transition temperature and compare to calculation in Al. Our results for the pair-breaking threshold demonstrate differences between bilayers and trilayers with the same total film thicknesses. We also predict high quality factors and long multilayer-averaged quasiparticle recombination times compared to thin-film Al. Our calculations give a route for designing KIDs to operate in this scientifically-important frequency regime. △ Less

Submitted 19 October, 2017; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: 9 pages, 10 figures

Journal ref: Superconductor Science and Technology, 31 (2017) 015007

Thermal elastic-wave attenuation in low-dimensional SiN$_{x}$ bars at low temperatures

Authors: Stafford Withington, Emily Williams, David J. Goldie, Christopher N. Thomas, Max Schneiderman

Abstract: At low temperatures, < 200 mK, the thermal flux through low-dimensional amorphous dielectric bars, < 2 $μ$m wide and 200 nm thick, is transported by a small number of low-order elastic modes. For long bars, L > 400 $μ$m, it is known that the conductance scales as 1/L, where L is the length, but for short bars, 1 $μ$m < L < 400 $μ$m, the length dependence is poorly known. Although it is assumed tha… ▽ More At low temperatures, < 200 mK, the thermal flux through low-dimensional amorphous dielectric bars, < 2 $μ$m wide and 200 nm thick, is transported by a small number of low-order elastic modes. For long bars, L > 400 $μ$m, it is known that the conductance scales as 1/L, where L is the length, but for short bars, 1 $μ$m < L < 400 $μ$m, the length dependence is poorly known. Although it is assumed that the transport must exhibit a diffusive to ballistic transition, the functional form of the transition and the scale size over which the transition occurs have not, to our knowledge, been measured. In this paper, we use ultra-low-noise superconducting Transition Edge Sensors (TESs) to measure the heat flux through a set of SiN$_{x}$ bars to establish the characteristic scale size of the ballistic to diffusive transition. For bars supporting 6 to 7 modes, we measure a thermal elastic-wave attenuation length of 20 $μ$m. The measurement is important because it sheds light on the scattering processes, which in turn are closely related to the generation of thermal fluctuation noise. Our own interest lies in creating patterned phononic filters for controlling heat flow and thermal noise in ultra-low-noise devices, but the work will be of interest to others trying to isolate devices from their environments, and studying loss mechanisms in micro-mechanical resonators. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 3 figures

Modelling proximity effects in Transition Edge Sensors to investigate the influence of lateral metal structures

Authors: Rebecca C. Harwin, David J. Goldie, Stafford Withington

Abstract: The bilayers of Transition Edge Sensors (TESs) are often modified with additional normal-metal features such as bars or dots. Previous device measurements suggest that these features improve performance, reducing electrical noise and altering response times. However, there is currently no numerical model to predict and quantify these effects. Here we extend existing techniques based on Usadel's eq… ▽ More The bilayers of Transition Edge Sensors (TESs) are often modified with additional normal-metal features such as bars or dots. Previous device measurements suggest that these features improve performance, reducing electrical noise and altering response times. However, there is currently no numerical model to predict and quantify these effects. Here we extend existing techniques based on Usadel's equations to describe TESs with normal-metal features. We show their influence on the principal TES characteristics, such as the small-signal electrothermal parameters $α$ and $β$ and the superconducting transition temperature $T_{c}$. Additionally, we examine the effects of an applied magnetic field on the device performance. Our model predicts a decrease in $T_{c}$, $α$ and $β$ as the number of lateral metal structures is increased. We also obtain a relationship between the length $L$ of a TES and its critical temperature, $T_{c} \propto L^{-0.7}$ for a bilayer with normal-metal bars. We predict a periodic magnetic flux dependence of $α, β$ and $I_{c}$. Our results demonstrate good agreement with published experimental data, which also show the reduction of $α$, $β$ and $T_{c}$ with increasing number of bars. The observed Fraunhofer dependence of critical current on magnetic flux is also anticipated by our model. The success of this model in predicting the effects of additional structures suggests that in the future numerical methods can be used to better inform the design of TESs, prior to device processing. △ Less

Submitted 30 March, 2017; originally announced March 2017.

Electrothermal Feedback in Kinetic Inductance Detectors

Authors: T. Guruswamy, C. N. Thomas, S. Withington, D. J. Goldie

Abstract: In Kinetic Inductance Detectors (KIDs) and other similar applications of superconducting microresonators, both the large and small-signal behaviour of the device may be affected by electrothermal feedback. Microwave power applied to read out the device is absorbed by and heats the superconductor quasiparticles, changing the superconductor conductivity and hence the readout power absorbed in a posi… ▽ More In Kinetic Inductance Detectors (KIDs) and other similar applications of superconducting microresonators, both the large and small-signal behaviour of the device may be affected by electrothermal feedback. Microwave power applied to read out the device is absorbed by and heats the superconductor quasiparticles, changing the superconductor conductivity and hence the readout power absorbed in a positive or negative feedback loop. In this work, we explore numerically the implications of an extensible theoretical model of a generic superconducting microresonator device for a typical KID, incorporating recent work on the power flow between superconductor quasiparticles and phonons. This model calculates the large-signal (changes in operating point) and small-signal behaviour of a device, allowing us to determine the effect of electrothermal feedback on device responsivity and noise characteristics under various operating conditions. We also investigate how thermally isolating the device from the bath, for example by designing the device on a membrane only connected to the bulk substrate by thin legs, affects device performance. We find that at a typical device operating point, positive electrothermal feedback reduces the effective thermal conductance from the superconductor quasiparticles to the bath, and so increases responsivity to signal (pair-breaking) power, increases noise from temperature fluctuations, and decreases the Noise Equivalent Power (NEP). Similarly, increasing the thermal isolation of the device while kee** the quasiparticle temperature constant decreases the NEP, but also decreases the device response bandwidth. △ Less

Submitted 31 January, 2017; originally announced January 2017.

Comments: 11 pages, 10 figures

Journal ref: Superconductor Science and Technology, 30 (2017) 064006

Probing Quantum Correlation Functions Through Energy Absorption Interferometry

Authors: S. Withington, C. N. Thomas, D. J. Goldie

Abstract: An interferometric technique is proposed for determining the spatial forms of the individual degrees of freedom through which a many body system can absorb energy from its environment. The method separates out the coherent excitations present at any given frequency; it is not necessary to infer modal content from spectra. The system under test is excited with two external sources, which create gen… ▽ More An interferometric technique is proposed for determining the spatial forms of the individual degrees of freedom through which a many body system can absorb energy from its environment. The method separates out the coherent excitations present at any given frequency; it is not necessary to infer modal content from spectra. The system under test is excited with two external sources, which create generalized forces, and the fringe in the total power dissipated is measured as the relative phase between the sources is varied. If the complex fringe visibility is measured for different pairs of source locations, the anti-Hermitian part of the complex-valued non-local correlation tensor can be determined, which can then be decomposed to give the natural dynamical modes of the system and their relative responsivities. If each source in the interferometer creates a different kind of force, the spatial forms of the individual excitations that are responsible for cross-correlated response can be found. The technique is a generalization of holography because it measures the state of coherence to which the system is maximally sensitive. It can be applied across a wide range of wavelengths, in a variety of ways, to homogeneous media, thin films, patterned structures, and to components such as sensors, detectors and energy harvesting absorbers. △ Less

Submitted 11 September, 2016; originally announced September 2016.

Comments: 14 pages, 4 figures

Journal ref: Phys. Rev. A 96, 022131 (2017)

Broadband illumination of superconducting pair breaking photon detectors

Authors: Tejas Guruswamy, David J. Goldie, Stafford Withington

Abstract: Understanding the detailed behaviour of superconducting pair breaking photon detectors such as Kinetic Inductance Detectors requires knowledge of the nonequilibrium quasiparticle energy distributions. We have previously calculated the steady state distributions resulting from uniform absorption of monochromatic sub gap and above gap frequency radiation by thin films. In this work, we use the same… ▽ More Understanding the detailed behaviour of superconducting pair breaking photon detectors such as Kinetic Inductance Detectors requires knowledge of the nonequilibrium quasiparticle energy distributions. We have previously calculated the steady state distributions resulting from uniform absorption of monochromatic sub gap and above gap frequency radiation by thin films. In this work, we use the same methods to calculate the effect of illumination by broadband sources, such as thermal radiation from astrophysical phenomena or from the readout system. Absorption of photons at multiple above gap frequencies is shown to not change the structure of the quasiparticle energy distribution close to the superconducting gap. Hence for typical absorbed powers, we find the effects of absorption of broadband pair breaking radiation can simply be considered as the sum of the effects of absorption of many monochromatic sources. Distribution averaged quantities, like quasiparticle generation effciency $η$, match exactly a weighted average over the bandwidth of the source of calculations assuming a monochromatic source. For sub gap frequencies, however, distributing the absorbed power across multiple frequencies does change the low energy quasiparticle distribution. For moderate and high absorbed powers, this results in a significantly larger $η$ - a higher number of excess quasiparticles for a broadband source compared to a monochromatic source of equal total absorbed power. Typically in KIDs the microwave power absorbed has a very narrow bandwidth, but in devices with broad resonance characteristics (low quality factors), this increase in $η$ may be measurable. △ Less

Submitted 22 February, 2016; originally announced February 2016.

Comments: 7 pages, 9 figures

The non-equilibrium response of a superconductor to pair-breaking radiation measured over a broad frequency band

Authors: P. J. de Visser, S. J. C. Yates, T. Guruswamy, D. J. Goldie, S. Withington, A. Neto, N. Llombart, A. M. Baryshev, T. M. Klapwijk, J. J. A. Baselmans

Abstract: We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice… ▽ More We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice the pair-breaking energy. At higher frequencies, the response rises again due to trap** of pair-breaking phonons in the superconductor. In practice this is the first measurement of the frequency dependence of the quasiparticle creation efficiency due to pair-breaking in a superconductor. The efficiency, calculated from the different non-equilibrium quasiparticle distribution functions at each frequency, is in agreement with the measurements. △ Less

Submitted 22 May, 2015; originally announced May 2015.

Journal ref: Applied Physics Letters 106, 252602 (2015)

Quasiparticle effective temperature in superconducting thin films illuminated at THz frequencies

Authors: Tejas Guruswamy, David J. Goldie, Stafford Withington

Abstract: The response of superconducting pair-breaking detectors is dependent on the details of the quasiparticle distribution. In Kinetic Inductance Detectors (KIDs), where both pair breaking and non-pair breaking photons are absorbed simultaneously, calculating the detector response therefore requires knowledge of the often nonequilibrium distributions. The quasiparticle effective temperature provides a… ▽ More The response of superconducting pair-breaking detectors is dependent on the details of the quasiparticle distribution. In Kinetic Inductance Detectors (KIDs), where both pair breaking and non-pair breaking photons are absorbed simultaneously, calculating the detector response therefore requires knowledge of the often nonequilibrium distributions. The quasiparticle effective temperature provides a good approximation to these nonequilibrium distributions. We compare an analytical expression relating absorbed power and the quasiparticle effective temperature in superconducting thin films to full solutions for the nonequilibrium distributions, and find good agreement for a range of materials, absorbed powers, photon frequencies and temperatures typical of KIDs. This analytical expression allows inclusion of nonequilibrium effects in device models without solving for the detailed distributions. We also show our calculations of the frequency dependence of the detector response are in agreement with recent experimental measurements of the response of Ta KIDs at THz frequencies. △ Less

Submitted 28 April, 2015; originally announced April 2015.

Comments: 4 pages, 5 figures. Presented at the 26th International Symposium on Space Terahertz Technology, Cambridge, MA, 16-18 March 2015

Elastic Interferometers as Phononic Filters for Thermal Isolation in Low-Noise Transition Edge Sensors

Authors: Djelal Osman, Stafford Withington, David J. Goldie, Dorota M. Glowacka

Abstract: In order to achieve low Noise-Equivalent-Powers (NEP < 1 aW Hz$^{-1/2}$) Transition Edge Sensors (TES) require high levels of thermal isolation between the superconducting bilayer and the heat bath. We propose that short micro-machined acoustic interferometers can be used for low-noise thermal isolation, avoiding many of the difficulties inherent in conventional, long- legged TES designs. In this… ▽ More In order to achieve low Noise-Equivalent-Powers (NEP < 1 aW Hz$^{-1/2}$) Transition Edge Sensors (TES) require high levels of thermal isolation between the superconducting bilayer and the heat bath. We propose that short micro-machined acoustic interferometers can be used for low-noise thermal isolation, avoiding many of the difficulties inherent in conventional, long- legged TES designs. In this paper, we present a detailed elastic wave model of interferometric phononic legs, and demonstrate the successful fabrication of TESs that are thermally isolated by interferometric structures. △ Less

Submitted 21 April, 2015; originally announced April 2015.

Nonequilibrium superconducting thin films with sub-gap and pair-breaking photon illumination

Authors: Tejas Guruswamy, David J. Goldie, Stafford Withington

Abstract: We calculate nonequilibrium quasiparticle and phonon distributions for a number of widely-used low transition temperature thin-film superconductors under constant, uniform illumination by sub-gap probe and pair-breaking signal photons simultaneously. From these distributions we calculate material-characteristic parameters that allow rapid evaluation of an effective quasiparticle temperature using… ▽ More We calculate nonequilibrium quasiparticle and phonon distributions for a number of widely-used low transition temperature thin-film superconductors under constant, uniform illumination by sub-gap probe and pair-breaking signal photons simultaneously. From these distributions we calculate material-characteristic parameters that allow rapid evaluation of an effective quasiparticle temperature using a simple analytical expression, for all materials studied (Mo, Al, Ta, Nb, and NbN) for all photon energies. We also explore the temperature and energy-dependence of the low-energy quasiparticle generation efficiency $η$ by pair-breaking signal photons finding $η\approx 0.6$ in the limit of thick films at low bath temperatures that is material-independent. Taking the energy distribution of excess quasiparticles into account, we find $η\to 1$ as the bath temperature approaches the transition temperature in agreement with the assumption of the two-temperature model of the nonequilibrium response that is appropriate in that regime. The behaviour of $η$ with signal frequency scaled by the superconducting energy gap is also shown to be material-independent, and is in qualitative agreement with recent experimental results. An enhancement of $η$ in the presence of sub-gap (probe) photons is shown to be most significant at signal frequencies near the superconducting gap frequency and arises due to multiple photon absorption events that increase the average energy of excess quasiparticles above that in the absence of the probe. △ Less

Submitted 8 January, 2015; originally announced January 2015.

Comments: 9 pages, 7 figures

Journal ref: Supercond. Sci. Technol. 28 (2015) 054002

Electrothermal Model of Kinetic Inductance Detectors

Authors: Christopher N Thomas, Stafford Withington, David J Goldie

Abstract: An electrothermal model of Kinetic Inductance Detectors (KIDs) is described. The non-equilibrium state of the resonator's quasiparticle system is characterized by an effective temperature, which because of readout-power heating is higher than that of the bath. By balancing the flow of energy into the quasiparticle system, it is possible to calculate the steady-state large-signal, small-signal and… ▽ More An electrothermal model of Kinetic Inductance Detectors (KIDs) is described. The non-equilibrium state of the resonator's quasiparticle system is characterized by an effective temperature, which because of readout-power heating is higher than that of the bath. By balancing the flow of energy into the quasiparticle system, it is possible to calculate the steady-state large-signal, small-signal and noise behaviour. Resonance-curve distortion and hysteretic switching appear naturally within the framework. It is shown that an electrothermal feedback process exists, which affects all aspects of behaviour. It is also shown that generation-recombination noise can be interpreted in terms of the thermal fluctuation noise in the effective thermal conductance that links the quasiparticle and phonon systems of the resonator. Because the scheme is based on electrothermal considerations, multiple elements can be added to simulate the behaviour of complex devices, such as resonators on membranes, again taking into account readout power heating. △ Less

Submitted 20 April, 2015; v1 submitted 6 November, 2014; originally announced November 2014.

Comments: This is an author-created, un-copyedited version of an article published in Superconductor Science and Technology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at 10.1088/0953-2048/28/4/045012. Consult Version of Record for changes in response to reviewers

Journal ref: Supercond. Sci. Technol. 28 045012 (2015)

Transition Edge Sensors with Few-Mode Ballistic Thermal Isolation

Authors: Djelal Osman, Stafford Withington, David J Goldie, Dorota M Glowacka

Abstract: We have fabricated Transition Edge Sensors (TESs) whose thermal characteristics are completely characterised by few-mode ballistic phonon exchange with the heat bath. These TESs have extremely small amorphous SiNx support legs: 0.2 um thick, 0.7 to 1.0 um wide and 1.0 to 4.0 um long. We show, using classical elastic wave theory, that it is only necessary to know the geometry and bulk elastic const… ▽ More We have fabricated Transition Edge Sensors (TESs) whose thermal characteristics are completely characterised by few-mode ballistic phonon exchange with the heat bath. These TESs have extremely small amorphous SiNx support legs: 0.2 um thick, 0.7 to 1.0 um wide and 1.0 to 4.0 um long. We show, using classical elastic wave theory, that it is only necessary to know the geometry and bulk elastic constants of the material to calculate the thermal conductance and fluctuation noise. Our devices operate in the few-mode regime, between 5 and 7 modes per leg, and have noise equivalent powers (NEPs) of 1.2 aW Hz-1/2. The NEP is dominated by the thermal fluctuation noise in the legs, which itself is dominated by phonon shot-noise. Thus TESs have been demonstrated whose thermal characteristics are fully accounted for by an elastic noise-wave model. Our current devices, and second-generation devices based on patterned phononic filters, can be used to produce optically compact, mechanically robust, highly sensitive TES imaging arrays, circumventing many of the problems inherent in conventional long-legged designs. △ Less

Submitted 12 February, 2014; originally announced February 2014.

Comments: 10 pages, 9 figures, 1 table

The CAMbridge Emission Line Surveyor (CAMELS)

Authors: C. N. Thomas, S. Withington, R. Maiolino, D. J. Goldie, E. de Lera Acedo, J. Wagg, R. Blundell, S. Paine, L. Zeng

Abstract: The CAMbridge Emission Line Surveyor (CAMELS) is a pathfinder program to demonstrate on-chip spectrometry at millimetre wavelengths. CAMELS will observe at frequencies from 103-114.7 GHz, providing 512 channels with a spectral resolution of R = 3000. In this paper we describe the science goals of CAMELS, the current system level design for the instrument and the work we are doing on the detailed d… ▽ More The CAMbridge Emission Line Surveyor (CAMELS) is a pathfinder program to demonstrate on-chip spectrometry at millimetre wavelengths. CAMELS will observe at frequencies from 103-114.7 GHz, providing 512 channels with a spectral resolution of R = 3000. In this paper we describe the science goals of CAMELS, the current system level design for the instrument and the work we are doing on the detailed designs of the individual components. In addition, we will discuss our efforts to understand the impact that the design and calibration of the filter bank on astronomical performance. The shape of the filter channels, the degree of overlap and the nature of the noise all effect how well the parameters of a spectral line can be recovered. We have developed a new and rigorous method for analysing performance, based on the concept of Fisher information. This can in be turn coupled to a detailed model of the science case, allowing design trade-offs to be properly investigated. △ Less

Submitted 17 January, 2014; originally announced January 2014.

Comments: Submitted to the proceedings of the 24th International Symposium on Space Terahertz Technology (ISSTT), held in Groningen, The Netherlands, April 8-10 2013

Development of a NbN Deposition Process for Superconducting Quantum Sensors

Authors: D. M. Glowacka, D. J. Goldie, S. Withington, H. Muhammad, G. Yassin, B. K. Tan

Abstract: We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to achieve the nitridation of a Nb target. Subsequent sputtering leads to the deposition of NbN onto the host substrate. The characteristics of a sputtered film d… ▽ More We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to achieve the nitridation of a Nb target. Subsequent sputtering leads to the deposition of NbN onto the host substrate. The characteristics of a sputtered film depend on a number of parameters: argon pressure, nitrogen flow rate and time-evolution profile, substrate material, etc. Crucially, the hysteresis in the target voltage as a function of the nitrogen flow can be used to provide a highly effective monitor of nitrogen consumption during the reactive process. By studying these dependencies we have been able to achieve highly reproducible film characteristics on sapphire, silicon dioxide on silicon, and silicon nitride on silicon. Intrinsic film stress was minimised by optimising the argon pressure, giving NbN films having Tc = 14.65 K. In the paper, we report characteristics such as deposition rate, Residual Resistance Ratio (RRR), film resistivity, transition temperature, and stress, as a function of deposition conditions. In order to enhance our understanding of the microwave properties of the films, we fabricated a wide range of microstrip NbN resonators (half wavelength, quarter wavelength, ring resonators). In the paper, we provide an illustrative result from this work showing a 2.1097 GHz resonator having a Q of 15,962 at 3.3 K. △ Less

Submitted 10 January, 2014; originally announced January 2014.

Comments: 4 pages 13 figures, Submitted to Proc. 24TH International Symposium On Space Terahertz Technology, Groningen, 8-10 APRIL, 2013

Report number: C10a

Non-Equilibrium Superconductivity in Kinetic Inductance Detectors for THz Photon Sensing

Authors: D. J. Goldie, S. Withington

Abstract: Low temperature Kinetic Inductance Detectors (KIDs) are attractive candidates for producing quantumsensitive, arrayable sensors for astrophysical and other precision measurement applications. The readout uses a low frequency probe signal with quanta of energy well-below the threshold for pair-breaking in the superconductor. We have calculated the detailed non-equilibrium quasiparticle and phonon e… ▽ More Low temperature Kinetic Inductance Detectors (KIDs) are attractive candidates for producing quantumsensitive, arrayable sensors for astrophysical and other precision measurement applications. The readout uses a low frequency probe signal with quanta of energy well-below the threshold for pair-breaking in the superconductor. We have calculated the detailed non-equilibrium quasiparticle and phonon energy spectra generated by the probe signal of the KID when operating well-below its superconducting transition temperature Tc within the framework of the coupled kinetic equations described by Chang and Scalapino.[1] At the lowest bath temperature studied Tb/Tc = 0.1 the quasiparticle distributions can be driven far from equilibrium. In addition to the low frequency probe signal we have incorporated a high frequency (~ 1 THz) source signal well-above the pair-breaking threshold of the superconductor. Calculations of source signal detection efficiency are discussed △ Less

Submitted 10 January, 2014; originally announced January 2014.

Comments: 5 pages 4 figures. Submitted to Proc. 24TH International Symposium On Space Terahertz Technology, Groningen, 8-10 APRIL, 2013

A Fabrication Route for Arrays of Ultra-low-Noise MoAu Transition Edge Sensors on Thin Silicon Nitride for Space Applications

Authors: D. M. Glowacka, M. Crane, D. J. Goldie, S. Withington

Abstract: We describe a process route to fabricate arrays of Ultra-low-Noise MoAu Transition Edge Sensors (TESs). The low thermal conductance required for space applications is achieved using 200 nm-thick Silicon Nitride (SiNx ) patterned to form long-thin legs with widths of 2.1 μm. Using bilayers formed on SiNx islands from films with 40 nm-thick Mo and Au thicknesses in the range 30 to 280 nm deposited b… ▽ More We describe a process route to fabricate arrays of Ultra-low-Noise MoAu Transition Edge Sensors (TESs). The low thermal conductance required for space applications is achieved using 200 nm-thick Silicon Nitride (SiNx ) patterned to form long-thin legs with widths of 2.1 μm. Using bilayers formed on SiNx islands from films with 40 nm-thick Mo and Au thicknesses in the range 30 to 280 nm deposited by dc-sputtering in ultra-high vacuum we can obtain tunable transition temperatures in the range 700 to 70 mK. The sensors use large-area absorbers fabricated from high resistivity, thin-film beta-phase Ta to provide impedance-matching to incident radiation. The absorbers are patterned to reduce the heat capacity associated with the nitride support structure and include Au thermalizing features to assist the heat flow into the TES. Arrays of 400 detectors at the pixel spacing required for the long-wavelength band of the far-infrared instrument SAFARI are now being fabricated. Device yields approaching 99% are achieved. △ Less

Submitted 10 January, 2014; originally announced January 2014.

Comments: 6 pages 4 figures

Journal ref: J. Low Temp Phys 167 516 (2012)

Development of a NbN Deposition Process for Superconducting Quantum Sensors

Authors: D. M. Glowacka, D. J. Goldie, S. Withington, H. Muhammad, G. Yassin

Abstract: We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to achieve the nitridation of a Nb target. Subsequent sputtering leads to the deposition of NbN onto the host substrate. The characteristics of a sputtered film d… ▽ More We have carried out a detailed programme to explore the superconducting characteristics of reactive DC-magnetron sputtered NbN. The basic principle is to ignite a plasma using argon, and then to introduce a small additional nitrogen flow to achieve the nitridation of a Nb target. Subsequent sputtering leads to the deposition of NbN onto the host substrate. The characteristics of a sputtered film depend on a number of parameters: argon pressure, nitrogen flow rate and time-evolution profile, substrate material, etc. Crucially, the hysteresis in the target voltage as a function of the nitrogen flow can be used to provide a highly effective monitor of nitrogen consumption during the reactive process. By studying these dependencies we have been able to achieve highly reproducible film characteristics on sapphire, silicon dioxide on silicon, and silicon nitride on silicon. Intrinsic film stress was minimised by optimising the argon pressure, giving NbN films having Tc = 14.65 K. In the paper, we report characteristics such as deposition rate, Residual Resistance Ratio (RRR), film resistivity, transition temperature, and stress, as a function of deposition conditions. In order to enhance our understanding of the microwave properties of the films, we fabricated a wide range of microstrip NbN resonators (half wavelength, quarter wavelength, ring resonators). In the paper, we provide an illustrative result from this work showing a 2.1097 GHz resonator having a Q of 15,962 at 3.3 K. △ Less

Submitted 10 January, 2014; originally announced January 2014.

Comments: 6 pages 13 figures. Submitteed to IEEE Trans. THz Sci Technol. 2013

Towards Ultra-Low-NoiseMoAu Transition Edge Sensors

Authors: D. J. Goldie, A. V. Velichko, D. M. Glowacka, S. Withington

Abstract: We report initial measurements on our firstMoAu Transition Edge Sensors (TESs). The TESs formed from a bilayer of 40 nm of Mo and 106 nm of Au showed transition temperatures of about 320 mK, higher than identical TESs with a MoCu bilayer which is consistent with a reduced electron transmission coefficient between the bilayer films. We report measurements of thermal conductance in the 200 nm thick… ▽ More We report initial measurements on our firstMoAu Transition Edge Sensors (TESs). The TESs formed from a bilayer of 40 nm of Mo and 106 nm of Au showed transition temperatures of about 320 mK, higher than identical TESs with a MoCu bilayer which is consistent with a reduced electron transmission coefficient between the bilayer films. We report measurements of thermal conductance in the 200 nm thick silicon nitride SiNx support structures at this temperature, TES dynamic behaviour and current noise measurements. △ Less

Submitted 10 January, 2014; originally announced January 2014.

Comments: 6 pages 3 figures

Journal ref: J. Low Temp. Phys. 167 561 2012

Quasiparticle generation efficiency in superconducting thin-films

Authors: T. Guruswamy, D. J. Goldie, S. Withington

Abstract: Thin-film superconductors with thickness 30 to 500 nm are used as non-equilibrium quantum detectors for photons, phonons or more exotic particles. One of the most basic questions in determining their limiting sensitivity is the efficiency with which the quanta of interest couple to the detected quasiparticles. As low temperature superconducting resonators, thin-films are attractive candidates for… ▽ More Thin-film superconductors with thickness 30 to 500 nm are used as non-equilibrium quantum detectors for photons, phonons or more exotic particles. One of the most basic questions in determining their limiting sensitivity is the efficiency with which the quanta of interest couple to the detected quasiparticles. As low temperature superconducting resonators, thin-films are attractive candidates for producing quantum-sensitive arrayable sensors and the readout uses an additional microwave probe. We have calculated the quasiparticle generation efficiency eta_s for low energy photons in a representative, clean thin-film superconductor (Al) operating well-below its superconductingtransition temperature as a function of film thickness, within the framework of the coupled kineticequations described by Chang and Scalapino.[J. J. Chang and D. J. Scalapino, J. Low Temp. Phys. 31, 1 (1978)]. We have also included the effect of a lower frequency probe. We show that phonon loss from the thin-film reduces eta_s by as much as 40% compared to earlier models that considered relatively thick films or infinite volumes. We also show that the presence of the probe and signal enhances the generation efficiency slightly. We conclude that the ultimate limiting noise equivalent power of this class of detector is determined by the thin-film geometry. △ Less

Submitted 9 January, 2014; originally announced January 2014.

Comments: 7 pages 7 figures

Journal ref: Supercond. Sci. Technology 27 (2014) 055012

Partially Coherent Optical Modelling of the Ultra-Low-Noise Far-Infrared Imaging Arrays on the SPICA Mission

Authors: Stafford Withington, Christopher N. Thomas, David J. Goldie

Abstract: We have developed a range of theoretical and numerical techniques for modeling the multi-mode, 210-34 micron, ultra-low-noise Transition Edge Sensors that will be used on the SAFARI instrument on the ESA/JAXA cooled-aperture FIR space telescope SPICA. The models include a detailed analysis of the resistive and reactive properties of thin superconducting absorbing films, and a partially coherent mo… ▽ More We have developed a range of theoretical and numerical techniques for modeling the multi-mode, 210-34 micron, ultra-low-noise Transition Edge Sensors that will be used on the SAFARI instrument on the ESA/JAXA cooled-aperture FIR space telescope SPICA. The models include a detailed analysis of the resistive and reactive properties of thin superconducting absorbing films, and a partially coherent mode-matching analysis of patterned films in multi-mode waveguide. The technique allows the natural optical modes, modal responsivities, and Stokes maps of complicated structures comprising patterned films in profiled waveguides and cavities to be determined. △ Less

Submitted 27 July, 2013; originally announced July 2013.

Evidence of a nonequilibrium distribution of quasiparticles in the microwave response of a superconducting aluminium resonator

Authors: P. J. de Visser, D. J. Goldie, P. Diener, S. Withington, J. J. A. Baselmans, T. M. Klapwijk

Abstract: In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperatu… ▽ More In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperature. Below 200 mK, both the quality factor and resonant frequency decrease with increasing microwave power, consistent with the creation of excess quasiparticles due to microwave absorption. Counterintuitively, above 200 mK, the quality factor and resonant frequency increase with increasing power. We demonstrate that the effect can only be understood by a non-thermal quasiparticle distribution. △ Less

Submitted 9 January, 2014; v1 submitted 20 June, 2013; originally announced June 2013.

Journal ref: Phys. Rev. Lett. 112, 047004 (2014)

Non-equilibrium superconductivity in superconducting resonators

Authors: D. J. Goldie, S. Withington

Abstract: We have calculated the non-equilibrium quasiparticle and phonon distributions $f(E)$, $n(Ω)$, where $E$ and $Ω$ are the quasiparticle and phonon energies respectively, generated by the photons of the probe signal of a low temperature superconducting resonator SR operating well-below its transition temperature $T_c$ as the absorbed probe power per unit volume $P_{abs}$ was changed. The calculations… ▽ More We have calculated the non-equilibrium quasiparticle and phonon distributions $f(E)$, $n(Ω)$, where $E$ and $Ω$ are the quasiparticle and phonon energies respectively, generated by the photons of the probe signal of a low temperature superconducting resonator SR operating well-below its transition temperature $T_c$ as the absorbed probe power per unit volume $P_{abs}$ was changed. The calculations give insight into a rate equation estimate which suggests that the quasiparticle distributions can be driven far from the thermal equilibrium value for typical readout powers. From $f(E)$ the driven quasiparticle number density $N_{qp}$ and lifetime $τ_r$ were calculated. Using $N_{qp}$ we defined an effective temperature $T_N^*$ to describe the driven $f(E)$. The lifetime was compared to the distribution averaged thermal lifetime at $T_N^*$ and good agreement was found typically within a few percent. We used $f(E)$ to model a representative SR. The complex conductivity and hence the frequency dependence of the experimentally measured forward scattering parameter $S_{21}$ of the SR as a function of $P_{abs}$ were found. The non-equilibrium $S_{21}$ cannot be accurately modeled by a thermal distribution at an elevated temperature $T_{21}^*$ having a higher quality-factor in all cases studied and for low $P_{abs}$ $T_{21}^*\sim T_N^*$. Using $τ_r$ and $N_{qp}$ we determined the achievable Noise Equivalent Power of the resonator used as a detector as a function of $P_{abs}$. Simpler expressions for $T_N^*$ as a function of $P_{abs}$ were derived which give a very good account of $T_N^*$ and also $N_{qp}$ and $τ_r$. We conclude that multiple photon absorption from the probe increases the quasiparticle number above the thermal background and ultimately limits the achievable NEP of the resonator. △ Less

Submitted 3 August, 2012; originally announced August 2012.

Comments: 10 pages 8 figures

Transition Edge Sensor Thermometry for On-chip Materials Characterization

Authors: D. J. Goldie, D. M. Glowacka, K. Rostem†, S. Withington

Abstract: The next generation of ultra-low-noise cryogenic detectors for space science applications require continued exploration of materials characteristics at low temperatures. The low noise and good energy sensitivity of current Transition Edge Sensors (TESs) permits measurements of thermal parameters of mesoscopic systems with unprecedented precision. We describe a radiometric technique for differentia… ▽ More The next generation of ultra-low-noise cryogenic detectors for space science applications require continued exploration of materials characteristics at low temperatures. The low noise and good energy sensitivity of current Transition Edge Sensors (TESs) permits measurements of thermal parameters of mesoscopic systems with unprecedented precision. We describe a radiometric technique for differential measurements of materials characteristics at low temperatures (below about 3K). The technique relies on the very broadband thermal radiation that couples between impedance-matched resistors that terminate a Nb superconducting microstrip and the power exchanged is measured using a TES. The capability of the TES to deliver fast, time-resolved thermometry further expands the parameter space: for example to investigate time-dependent heat capacity. Thermal properties of isolated structures can be measured in geometries that eliminate the need for complicating additional components such as the electrical wires of the thermometer itself. Differential measurements allow easy monitoring of temperature drifts in the cryogenic environment. The technique is rapid to use and easily calibrated. Preliminary results will be discussed. △ Less

Submitted 31 January, 2011; originally announced January 2011.

Comments: Published in proceedings 21ST INTERNATIONAL SYMPOSIUM ON SPACE TERAHERTZ TECHNOLOGY, OXFORD, 23-25 MARCH, 2010

Detecting the B-mode Polarisation of the CMB with Clover

Authors: C. E. North, B. R. Johnson, P. A. R. Ade, M. D. Audley, C. Baines, R. A. Battye, M. L. Brown, P. Cabella, P. G. Calisse, A. D. Challinor, W. D. Duncan, P. G. Ferreira, W. K. Gear, D. Glowacka, D. J. Goldie, P. K. Grimes, M. Halpern, V. Haynes, G. C. Hilton, K. D. Irwin, M. E. Jones, A. N. Lasenby, P. J. Leahy, J. Leech, B. Maffei , et al. (19 additional authors not shown)

Abstract: We describe the objectives, design and predicted performance of Clover, which is a ground-based experiment to measure the faint ``B-mode'' polarisation pattern in the cosmic microwave background (CMB). To achieve this goal, clover will make polarimetric observations of approximately 1000 deg^2 of the sky in spectral bands centred on 97, 150 and 225 GHz. The observations will be made with a two-m… ▽ More We describe the objectives, design and predicted performance of Clover, which is a ground-based experiment to measure the faint ``B-mode'' polarisation pattern in the cosmic microwave background (CMB). To achieve this goal, clover will make polarimetric observations of approximately 1000 deg^2 of the sky in spectral bands centred on 97, 150 and 225 GHz. The observations will be made with a two-mirror compact range antenna fed by profiled corrugated horns. The telescope beam sizes for each band are 7.5, 5.5 and 5.5 arcmin, respectively. The polarisation of the sky will be measured with a rotating half-wave plate and stationary analyser, which will be an orthomode transducer. The sky coverage combined with the angular resolution will allow us to measure the angular power spectra between 20 < l < 1000. Each frequency band will employ 192 single polarisation, photon noise limited TES bolometers cooled to 100 mK. The background-limited sensitivity of these detector arrays will allow us to constrain the tensor-to-scalar ratio to 0.026 at 3sigma, assuming any polarised foreground signals can be subtracted with minimal degradation to the 150 GHz sensitivity. Systematic errors will be mitigated by modulating the polarisation of the sky signals with the rotating half-wave plate, fast azimuth scans and periodic telescope rotations about its boresight. The three spectral bands will be divided into two separate but nearly identical instruments - one for 97 GHz and another for 150 and 225 GHz. The two instruments will be sited on identical three-axis mounts in the Atacama Desert in Chile near Pampa la Bola. Observations are expected to begin in late 2009. △ Less

Submitted 3 June, 2008; v1 submitted 23 May, 2008; originally announced May 2008.

Comments: 5 pages, 3 figures. To appear in the proceedings of the XXXXIIIrd Rencontres de Moriond "Cosmology". Figure 1 updated

Prototype finline-coupled TES bolometers for CLOVER

Authors: Michael D. Audley, Robert W. Barker, Michael Crane, Roger Dace, Dorota Glowacka, David J. Goldie, Anthony N. Lasenby, Howard M. Stevenson, Vassilka Tsaneva, Stafford Withington, Paul Grimes, Bradley Johnson, Ghassan Yassin, Lucio Piccirillo, Giampaolo Pisano, William D. Duncan, Gene C. Hilton, Kent D. Irwin, Carl D. Reintsema, Mark Halpern

Abstract: CLOVER is an experiment which aims to detect the signature of gravitational waves from inflation by measuring the B-mode polarization of the cosmic microwave background. CLOVER consists of three telescopes operating at 97, 150, and 220 GHz. The 97-GHz telescope has 160 feedhorns in its focal plane while the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a hexagonal arr… ▽ More CLOVER is an experiment which aims to detect the signature of gravitational waves from inflation by measuring the B-mode polarization of the cosmic microwave background. CLOVER consists of three telescopes operating at 97, 150, and 220 GHz. The 97-GHz telescope has 160 feedhorns in its focal plane while the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a hexagonal array and feed a polarimeter which uses finline-coupled TES bolometers as detectors. To detect the two polarizations the 97-GHz telescope has 320 detectors while the 150 and 220-GHz telescopes have 512 detectors each. To achieve the target NEPs (1.5, 2.5, and 4.5x10^-17 W/rtHz) the detectors are cooled to 100 mK for the 97 and 150-GHz polarimeters and 230 mK for the 220-GHz polarimeter. Each detector is fabricated as a single chip to ensure a 100% operational focal plane. The detectors are contained in linear modules made of copper which form split-block waveguides. The detector modules contain 16 or 20 detectors each for compatibility with the hexagonal arrays of horns in the telescopes' focal planes. Each detector module contains a time-division SQUID multiplexer to read out the detectors. Further amplification of the multiplexed signals is provided by SQUID series arrays. The first prototype detectors for CLOVER operate with a bath temperature of 230 mK and are used to validate the detector design as well as the polarimeter technology. We describe the design of the CLOVER detectors, detector blocks, and readout, and present preliminary measurements of the prototype detectors performance. △ Less

Submitted 14 August, 2006; originally announced August 2006.

Comments: 4 pages, 6 figures; to appear in the Proceedings of the 17th International Symposium on Space Terahertz Technology, held 10-12 May 2006 in Paris

TES imaging array technology for CLOVER

Authors: Michael D. Audley, Robert W. Barker, Michael Crane, Roger Dace, Dorota Glowacka, David J. Goldie, Anthony N. Lasenby, Howard M. Stevenson, Vassilka Tsaneva, Stafford Withington, Paul Grimes, Bradley Johnson, Ghassan Yassin, Lucio Piccirillo, Giampaolo Pisano, William D. Duncan, Gene C. Hilton, Kent D. Irwin, Carl D. Reintsema, Mark Halpern

Abstract: CLOVER is an experiment which aims to detect the signature of gravitational waves from inflation by measuring the B-mode polarization of the cosmic microwave background. CLOVER consists of three telescopes operating at 97, 150, and 220 GHz. The 97-GHz telescope has 160 horns in its focal plane while the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a hexagonal array a… ▽ More CLOVER is an experiment which aims to detect the signature of gravitational waves from inflation by measuring the B-mode polarization of the cosmic microwave background. CLOVER consists of three telescopes operating at 97, 150, and 220 GHz. The 97-GHz telescope has 160 horns in its focal plane while the 150 and 220-GHz telescopes have 256 horns each. The horns are arranged in a hexagonal array and feed a polarimeter which uses finline-coupled TES bolometers as detectors. To detect the two polarizations the 97-GHz telescope has 320 detectors while the 150 and 220-GHz telescopes have 512 detectors each. To achieve the required NEPs the detectors are cooled to 100 mK for the 97 and 150-GHz polarimeters and 230 mK for the 220-GHz polarimeter. Each detector is fabricated as a single chip to guarantee fully functioning focal planes. The detectors are contained in linear modules made of copper which form split-block waveguides. The detector modules contain 16 or 20 detectors each for compatibility with the hexagonal arrays of horns in the telescopes' focal planes. Each detector module contains a time-division SQUID multiplexer to read out the detectors. Further amplification of the multiplexed signals is provided by SQUID series arrays. The first prototype detectors for CLOVER operate with a bath temperature of 230 mK and are used to validate the detector design as well as the polarimeter technology. We describe the design of the CLOVER detectors, detector blocks, and readout, and give an update on the detector development. △ Less

Submitted 5 July, 2006; originally announced July 2006.

Comments: 9 pages, 7 figures, SPIE Orlando 24-31 May 2006, Conference 6275

Modelling the energy gap in transition metal/aluminium bilayers"

Authors: G. Brammertz, A. Golubov, A. Peacock, P. Verhoeve, D. J. Goldie, R. Venn

Abstract: We present an application of the generalised proximity effect theory. We present an application of the generalised proximity effect theory. △ Less

Submitted 25 June, 2002; originally announced June 2002.

Comments: 15 pages, 11 figures, presented at workshop on low temperature superconducting electronics at the University of Twente, The Netherlands

Journal ref: Physica C 350, 227-236, 2001

Development of practical soft X-ray imaging spectrometers

Authors: G. Brammertz, P. Verhoeve, A. Peacock, D. Martin, N. Rando, R. den Hartog, D. J. Goldie

Abstract: Cryogenic soft X-ray imaging spectrometers are currently being developed for applications in the fields of Astronomy and material sciences. In this paper we present experiments on optimized single devices, which show measured energy resolutions of 4.6 eV at 525 eV, 8.1 eV at 1.5 keV and 20.5 eV at 6 keV respectively. These energy resolutions combined with a quantum efficiency of more than 40 % i… ▽ More Cryogenic soft X-ray imaging spectrometers are currently being developed for applications in the fields of Astronomy and material sciences. In this paper we present experiments on optimized single devices, which show measured energy resolutions of 4.6 eV at 525 eV, 8.1 eV at 1.5 keV and 20.5 eV at 6 keV respectively. These energy resolutions combined with a quantum efficiency of more than 40 % in the energy range from 0.5 to 2 keV together with a count rate capability of 15 kHz demonstrate the overall good performance of single Superconducting Tunnel Junctions (STJs). Assembling these optimized single devices in a matrix read-out would provide the practical basis for a soft X-ray imaging spectrometer. △ Less

Submitted 18 October, 2001; originally announced October 2001.

Comments: 4 pages, presented at Applied Superconductivity Conference 2000

Journal ref: IEEE Transactions on Applied Superconductivity 11, 1, 828-831, March 2001