-
Quantifying the effects of spatial resolution and noise on galaxy metallicity gradients
Authors:
Ayan Acharyya,
Mark R. Krumholz,
Christoph Federrath,
Lisa J. Kewley,
Nathan J. Goldbaum,
Rob Sharp
Abstract:
Metallicity gradients are important diagnostics of galaxy evolution, because they record the history of events such as mergers, gas inflow and star-formation. However, the accuracy with which gradients can be measured is limited by spatial resolution and noise, and hence measurements need to be corrected for such effects. We use high resolution (~20 pc) simulation of a face-on Milky Way mass galax…
▽ More
Metallicity gradients are important diagnostics of galaxy evolution, because they record the history of events such as mergers, gas inflow and star-formation. However, the accuracy with which gradients can be measured is limited by spatial resolution and noise, and hence measurements need to be corrected for such effects. We use high resolution (~20 pc) simulation of a face-on Milky Way mass galaxy, coupled with photoionisation models, to produce a suite of synthetic high resolution integral field spectroscopy (IFS) datacubes. We then degrade the datacubes, with a range of realistic models for spatial resolution (2 to 16 beams per galaxy scale length) and noise, to investigate and quantify how well the input metallicity gradient can be recovered as a function of resolution and signal-to-noise ratio (SNR) with the intention to compare with modern IFS surveys like MaNGA and SAMI. Given appropriate propagation of uncertainties and pruning of low SNR pixels, we show that a resolution of 3-4 telescope beams per galaxy scale length is sufficient to recover the gradient to ~10-20% uncertainty. The uncertainty escalates to ~60% for lower resolution. Inclusion of the low SNR pixels causes the uncertainty in the inferred gradient to deteriorate. Our results can potentially inform future IFS surveys regarding the resolution and SNR required to achieve a desired accuracy in metallicity gradient measurements.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
unyt: Handle, manipulate, and convert data with units in Python
Authors:
Nathan J. Goldbaum,
John A. ZuHone,
Matthew J. Turk,
Kacper Kowalik,
Anna L. Rosen
Abstract:
Software that processes real-world data or that models a physical system must have some way of managing units. While simple approaches like the understood convention that all data are in a unit system (such as the MKS SI unit system) do work in practice, they are fraught with possible sources of error both by developers and users of the software. In this paper we present unyt, a Python library bas…
▽ More
Software that processes real-world data or that models a physical system must have some way of managing units. While simple approaches like the understood convention that all data are in a unit system (such as the MKS SI unit system) do work in practice, they are fraught with possible sources of error both by developers and users of the software. In this paper we present unyt, a Python library based on NumPy and SymPy for handling data that has units. It is designed both to aid quick interactive calculations and to be tightly integrated into a larger Python application or library. We compare unyt with two other Python libraries for handling units, Pint and astropy.units, and find that unyt is faster, has higher test coverage, and has fewer lines of code.
△ Less
Submitted 1 October, 2018; v1 submitted 6 June, 2018;
originally announced June 2018.
-
GAMER-2: a GPU-accelerated adaptive mesh refinement code -- accuracy, performance, and scalability
Authors:
Hsi-Yu Schive,
John A. ZuHone,
Nathan J. Goldbaum,
Matthew J. Turk,
Massimo Gaspari,
Chin-Yu Cheng
Abstract:
We present GAMER-2, a GPU-accelerated adaptive mesh refinement (AMR) code for astrophysics. It provides a rich set of features, including adaptive time-step**, several hydrodynamic schemes, magnetohydrodynamics, self-gravity, particles, star formation, chemistry and radiative processes with GRACKLE, data analysis with yt, and memory pool for efficient object allocation. GAMER-2 is fully bitwise…
▽ More
We present GAMER-2, a GPU-accelerated adaptive mesh refinement (AMR) code for astrophysics. It provides a rich set of features, including adaptive time-step**, several hydrodynamic schemes, magnetohydrodynamics, self-gravity, particles, star formation, chemistry and radiative processes with GRACKLE, data analysis with yt, and memory pool for efficient object allocation. GAMER-2 is fully bitwise reproducible. For the performance optimization, it adopts hybrid OpenMP/MPI/GPU parallelization and utilizes overlap** CPU computation, GPU computation, and CPU-GPU communication. Load balancing is achieved using a Hilbert space-filling curve on a level-by-level basis without the need to duplicate the entire AMR hierarchy on each MPI process. To provide convincing demonstrations of the accuracy and performance of GAMER-2, we directly compare with Enzo on isolated disk galaxy simulations and with FLASH on galaxy cluster merger simulations. We show that the physical results obtained by different codes are in very good agreement, and GAMER-2 outperforms Enzo and FLASH by nearly one and two orders of magnitude, respectively, on the Blue Waters supercomputers using $1-256$ nodes. More importantly, GAMER-2 exhibits similar or even better parallel scalability compared to the other two codes. We also demonstrate good weak and strong scaling using up to 4096 GPUs and 65,536 CPU cores, and achieve a uniform resolution as high as $10{,}240^3$ cells. Furthermore, GAMER-2 can be adopted as an AMR+GPUs framework and has been extensively used for the wave dark matter ($ψ$DM) simulations. GAMER-2 is open source (available at https://github.com/gamer-project/gamer) and new contributions are welcome.
△ Less
Submitted 4 October, 2018; v1 submitted 19 December, 2017;
originally announced December 2017.
-
Extracting Insights from Astrophysics Simulations
Authors:
Nathan J Goldbaum
Abstract:
Simulations inform all aspects of modern astrophysical research, ranging in scale from 1D and 2D test problems that can run in seconds on an astronomer's laptop all the way to large-scale 3D calculations that run on the largest supercomputers, with a spectrum of data sizes and shapes filling the landscape between these two extremes. I review the diversity of astrophysics simulation data formats co…
▽ More
Simulations inform all aspects of modern astrophysical research, ranging in scale from 1D and 2D test problems that can run in seconds on an astronomer's laptop all the way to large-scale 3D calculations that run on the largest supercomputers, with a spectrum of data sizes and shapes filling the landscape between these two extremes. I review the diversity of astrophysics simulation data formats commonly in use by researchers, providing an overview of the most common simulation techniques, including pure N-body dynamics, smoothed particle hydrodynamics (SPH), adaptive mesh refinement (AMR), and unstructured meshes. Additionally, I highlight methods for incorporating physical phenomena that are important for astrophysics, including chemistry, magnetic fields, radiative transport, and "subgrid" recipes for important physics that cannot be directly resolved in a simulation. In addition to the numerical techniques, I also discuss the communities that have developed around these simulation codes and argue that increasing use and availability of open community codes has dramatically lowered the barrier to entry for novice simulators.
△ Less
Submitted 28 November, 2017;
originally announced November 2017.
-
Grackle: a Chemistry and Cooling Library for Astrophysics
Authors:
Britton D. Smith,
Greg L. Bryan,
Simon C. O. Glover,
Nathan J. Goldbaum,
Matthew J. Turk,
John Regan,
John H. Wise,
Hsi-Yu Schive,
Tom Abel,
Andrew Emerick,
Brian W. O'Shea,
Peter Anninos,
Cameron B. Hummels,
Sadegh Khochfar
Abstract:
We present the Grackle chemistry and cooling library for astrophysical simulations and models. Grackle provides a treatment of non-equilibrium primordial chemistry and cooling for H, D, and He species, including H2 formation on dust grains; tabulated primordial and metal cooling; multiple UV background models; and support for radiation transfer and arbitrary heat sources. The library has an easily…
▽ More
We present the Grackle chemistry and cooling library for astrophysical simulations and models. Grackle provides a treatment of non-equilibrium primordial chemistry and cooling for H, D, and He species, including H2 formation on dust grains; tabulated primordial and metal cooling; multiple UV background models; and support for radiation transfer and arbitrary heat sources. The library has an easily implementable interface for simulation codes written in C, C++, and Fortran as well as a Python interface with added convenience functions for semi-analytical models. As an open-source project, Grackle provides a community resource for accessing and disseminating astrochemical data and numerical methods. We present the full details of the core functionality, the simulation and Python interfaces, testing infrastructure, performance, and range of applicability. Grackle is a fully open-source project and new contributions are welcome.
△ Less
Submitted 14 December, 2016; v1 submitted 29 October, 2016;
originally announced October 2016.
-
The AGORA High-Resolution Galaxy Simulations Comparison Project. II: Isolated Disk Test
Authors:
Ji-hoon Kim,
Oscar Agertz,
Romain Teyssier,
Michael J. Butler,
Daniel Ceverino,
Jun-Hwan Choi,
Robert Feldmann,
Ben W. Keller,
Alessandro Lupi,
Thomas Quinn,
Yves Revaz,
Spencer Wallace,
Nickolay Y. Gnedin,
Samuel N. Leitner,
Si**g Shen,
Britton D. Smith,
Robert Thompson,
Matthew J. Turk,
Tom Abel,
Kenza S. Arraki,
Samantha M. Benincasa,
Sukanya Chakrabarti,
Colin DeGraf,
Avishai Dekel,
Nathan J. Goldbaum
, et al. (18 additional authors not shown)
Abstract:
Using an isolated Milky Way-mass galaxy simulation, we compare results from 9 state-of-the-art gravito-hydrodynamics codes widely used in the numerical community. We utilize the infrastructure we have built for the AGORA High-resolution Galaxy Simulations Comparison Project. This includes the common disk initial conditions, common physics models (e.g., radiative cooling and UV background by the st…
▽ More
Using an isolated Milky Way-mass galaxy simulation, we compare results from 9 state-of-the-art gravito-hydrodynamics codes widely used in the numerical community. We utilize the infrastructure we have built for the AGORA High-resolution Galaxy Simulations Comparison Project. This includes the common disk initial conditions, common physics models (e.g., radiative cooling and UV background by the standardized package Grackle) and common analysis toolkit yt, all of which are publicly available. Subgrid physics models such as Jeans pressure floor, star formation, supernova feedback energy, and metal production are carefully constrained across code platforms. With numerical accuracy that resolves the disk scale height, we find that the codes overall agree well with one another in many dimensions including: gas and stellar surface densities, rotation curves, velocity dispersions, density and temperature distribution functions, disk vertical heights, stellar clumps, star formation rates, and Kennicutt-Schmidt relations. Quantities such as velocity dispersions are very robust (agreement within a few tens of percent at all radii) while measures like newly-formed stellar clump mass functions show more significant variation (difference by up to a factor of ~3). Systematic differences exist, for example, between mesh-based and particle-based codes in the low density region, and between more diffusive and less diffusive schemes in the high density tail of the density distribution. Yet intrinsic code differences are generally small compared to the variations in numerical implementations of the common subgrid physics such as supernova feedback. Our experiment reassures that, if adequately designed in accordance with our proposed common parameters, results of a modern high-resolution galaxy formation simulation are more sensitive to input physics than to intrinsic differences in numerical schemes.
△ Less
Submitted 8 March, 2018; v1 submitted 10 October, 2016;
originally announced October 2016.
-
Forward Modeling of Large-Scale Structure: An open-source approach with Halotools
Authors:
Andrew Hearin,
Duncan Campbell,
Erik Tollerud,
Peter Behroozi,
Benedikt Diemer,
Nathan J. Goldbaum,
Elise Jennings,
Alexie Leauthaud,
Yao-Yuan Mao,
Surhud More,
John Parejko,
Manodeep Sinha,
Brigitta Sipocz,
Andrew Zentner
Abstract:
We present the first stable release of Halotools (v0.2), a community-driven Python package designed to build and test models of the galaxy-halo connection. Halotools provides a modular platform for creating mock universes of galaxies starting from a catalog of dark matter halos obtained from a cosmological simulation. The package supports many of the common forms used to describe galaxy-halo model…
▽ More
We present the first stable release of Halotools (v0.2), a community-driven Python package designed to build and test models of the galaxy-halo connection. Halotools provides a modular platform for creating mock universes of galaxies starting from a catalog of dark matter halos obtained from a cosmological simulation. The package supports many of the common forms used to describe galaxy-halo models: the halo occupation distribution (HOD), the conditional luminosity function (CLF), abundance matching, and alternatives to these models that include effects such as environmental quenching or variable galaxy assembly bias. Satellite galaxies can be modeled to live in subhalos, or to follow custom number density profiles within their halos, including spatial and/or velocity bias with respect to the dark matter profile. The package has an optimized toolkit to make mock observations on a synthetic galaxy population, including galaxy clustering, galaxy-galaxy lensing, galaxy group identification, RSD multipoles, void statistics, pairwise velocities and others, allowing direct comparison to observations. Halotools is object-oriented, enabling complex models to be built from a set of simple, interchangeable components, including those of your own creation. Halotools has an automated testing suite and is exhaustively documented on http://halotools.readthedocs.io, which includes quickstart guides, source code notes and a large collection of tutorials. The documentation is effectively an online textbook on how to build and study empirical models of galaxy formation with Python.
△ Less
Submitted 22 September, 2017; v1 submitted 13 June, 2016;
originally announced June 2016.
-
Suppression of star formation in dwarf galaxies by grain photoelectric feedback
Authors:
John C. Forbes,
Mark R. Krumholz,
Nathan J. Goldbaum,
Avishai Dekel
Abstract:
Photoelectric heating has long been recognized as the primary source of heating for the neutral interstellar medium. Simulations of spiral galaxies found some indication that photoelectric heating could suppress star formation. However, simulations that include photoelectric heating have typically found that it has little effect on the rate of star formation in either spiral galaxies or dwarfs sug…
▽ More
Photoelectric heating has long been recognized as the primary source of heating for the neutral interstellar medium. Simulations of spiral galaxies found some indication that photoelectric heating could suppress star formation. However, simulations that include photoelectric heating have typically found that it has little effect on the rate of star formation in either spiral galaxies or dwarfs suggesting that supernovae and not photoelectric heating are responsible for setting the star formation law in galaxies. This result is in tension with recent work indicating that a star formation law that depends on galaxy metallicity, as expected for photoelectric heating but not for supernovae, reproduces the present-day galaxy population better than a metallicity-independent one. Here we report a series of simulations of dwarf galaxies, where the effects of both photoelectric heating and supernovae are expected to be strongest. We simultaneously include space- and time-dependent photoelectric heating, and we resolve the Sedov phase of every supernova blast wave, allowing us to make a direct measurement of the relative importance of momentum injection by supernovae and dust heating by far ultraviolet (FUV) photons in suppressing star formation. We find that supernovae are unable to account for the long observed gas depletion times in dwarf galaxies. Instead, ordinary photoelectric heating is the dominant means by which dwarf galaxies regulate their star formation rate at any given time, suppressing the star formation rate by more than an order of magnitude relative to simulations with only supernovae.
△ Less
Submitted 2 May, 2016;
originally announced May 2016.
-
Mass Transport and Turbulence in Gravitationally Unstable Disk Galaxies II: The Effects of Star Formation Feedback
Authors:
Nathan J. Goldbaum,
Mark R. Krumholz,
John C. Forbes
Abstract:
Self-gravity and stellar feedback are capable of driving turbulence and transporting mass and angular momentum in disk galaxies, but the balance between them is not well understood. In the previous paper in this series, we showed that gravity alone can drive turbulence in galactic disks, regulate their Toomre $Q$ parameters to $\sim$ 1, and transport mass inwards at a rate sufficient to fuel star…
▽ More
Self-gravity and stellar feedback are capable of driving turbulence and transporting mass and angular momentum in disk galaxies, but the balance between them is not well understood. In the previous paper in this series, we showed that gravity alone can drive turbulence in galactic disks, regulate their Toomre $Q$ parameters to $\sim$ 1, and transport mass inwards at a rate sufficient to fuel star formation in the centers of present-day galaxies. In this paper we extend our models to include the effects of star formation feedback. We show that feedback suppresses galaxies' star formation rates by a factor of $\sim$ 5 and leads to the formation of a multi-phase atomic and molecular ISM. Both the star formation rate and the phase balance produced in our simulations agree well with observations of nearby spirals. After our galaxies reach steady state, we find that the inclusion of feedback actually lowers the gas velocity dispersion slightly compared to the case of pure self-gravity, and also slightly reduces the rate of inward mass transport. Nevertheless, we find that, even with feedback included, our galactic disks self-regulate to $Q$ $\sim$ 1, and transport mass inwards at a rate sufficient to supply a substantial fraction of the inner disk star formation. We argue that gravitational instability is therefore likely to be the dominant source of turbulence and transport in galactic disks, and that it is responsible for fueling star formation in the inner parts of galactic disks over cosmological times.
△ Less
Submitted 5 May, 2016; v1 submitted 2 May, 2016;
originally announced May 2016.
-
Mass Transport and Turbulence in Gravitationally Unstable Disk Galaxies. I: The Case of Pure Self-Gravity
Authors:
Nathan J. Goldbaum,
Mark R. Krumholz,
John C. Forbes
Abstract:
The role of gravitational instability-driven turbulence in determining the structure and evolution of disk galaxies, and the extent to which gravity rather than feedback can explain galaxy properties, remains an open question. To address it, we present high resolution adaptive mesh refinement simulations of Milky Way-like isolated disk galaxies, including realistic heating and cooling rates and a…
▽ More
The role of gravitational instability-driven turbulence in determining the structure and evolution of disk galaxies, and the extent to which gravity rather than feedback can explain galaxy properties, remains an open question. To address it, we present high resolution adaptive mesh refinement simulations of Milky Way-like isolated disk galaxies, including realistic heating and cooling rates and a physically motivated prescription for star formation, but no form of star formation feedback. After an initial transient, our galaxies reach a state of fully-nonlinear gravitational instability. In this state, gravity drives turbulence and radial inflow. Despite the lack of feedback, the gas in our galaxy models shows substantial turbulent velocity dispersions, indicating that gravitational instability alone may be able to power the velocity dispersions observed in nearby disk galaxies on 100 pc scales. Moreover, the rate of mass transport produced by this turbulence approaches $\sim 1$ $M_\odot$ yr$^{-1}$ for Milky Way-like conditions, sufficient to fully fuel star formation in the inner disks of galaxies. In a companion paper we add feedback to our models, and use the comparison between the two cases to understand what galaxy properties depend sensitively on feedback, and which can be understood as the product of gravity alone. All of the code, initial conditions, and simulation data for our model are publicly available.
△ Less
Submitted 28 October, 2015;
originally announced October 2015.
-
Mixing and transport of metals by gravitational instability-driven turbulence in galactic discs
Authors:
Antoine C. Petit,
Mark R. Krumholz,
Nathan J. Goldbaum,
John C. Forbes
Abstract:
Metal production in galaxies traces star formation, and is highly concentrated toward the centers of galactic discs. This suggests that galaxies should have inhomogeneous metal distributions with strong radial gradients, but observations of present-day galaxies show only shallow gradients with little azimuthal variation, implying the existence of a redistribution mechanism. We study the role of gr…
▽ More
Metal production in galaxies traces star formation, and is highly concentrated toward the centers of galactic discs. This suggests that galaxies should have inhomogeneous metal distributions with strong radial gradients, but observations of present-day galaxies show only shallow gradients with little azimuthal variation, implying the existence of a redistribution mechanism. We study the role of gravitational instability-driven turbulence as a mixing mechanism by simulating an isolated galactic disc at high resolution, including metal fields treated as passive scalars. Since any cylindrical field can be decomposed into a sum of Fourier-Bessel basis functions, we set up initial metal fields characterized by these functions and study how different modes mix. We find both shear and turbulence contribute to mixing, but the mixing strongly depends on the symmetries of the mode. Non-axisymmetric modes have decay times smaller than the galactic orbital period because shear winds them up to small spatial scales, where they are erased by turbulence. The decay timescales for axisymmetric modes are much greater, though for all but the largest-scale inhomogeneities the mixing timescale is still short enough to erase chemical inhomogeneities over cosmological times. These different timescales provide an explanation for why galaxies retain metallicity gradients while there is almost no variation at a fixed radius. Moreover, the comparatively long timescales required for mixing axisymmetric modes may explain the greater diversity of metallicity gradients observed in high redshift galaxies as compared to local ones: these systems have not yet reached equilibrium between metal production and diffusion.
△ Less
Submitted 4 March, 2015; v1 submitted 27 November, 2014;
originally announced November 2014.
-
The AGORA High-Resolution Galaxy Simulations Comparison Project
Authors:
Ji-hoon Kim,
Tom Abel,
Oscar Agertz,
Greg L. Bryan,
Daniel Ceverino,
Charlotte Christensen,
Charlie Conroy,
Avishai Dekel,
Nickolay Y. Gnedin,
Nathan J. Goldbaum,
Javiera Guedes,
Oliver Hahn,
Alexander Hobbs,
Philip F. Hopkins,
Cameron B. Hummels,
Francesca Iannuzzi,
Dusan Keres,
Anatoly Klypin,
Andrey V. Kravtsov,
Mark R. Krumholz,
Michael Kuhlen,
Samuel N. Leitner,
Piero Madau,
Lucio Mayer,
Christopher E. Moody
, et al. (21 additional authors not shown)
Abstract:
We introduce the AGORA project, a comprehensive numerical study of well-resolved galaxies within the LCDM cosmology. Cosmological hydrodynamic simulations with force resolutions of ~100 proper pc or better will be run with a variety of code platforms to follow the hierarchical growth, star formation history, morphological transformation, and the cycle of baryons in and out of 8 galaxies with halo…
▽ More
We introduce the AGORA project, a comprehensive numerical study of well-resolved galaxies within the LCDM cosmology. Cosmological hydrodynamic simulations with force resolutions of ~100 proper pc or better will be run with a variety of code platforms to follow the hierarchical growth, star formation history, morphological transformation, and the cycle of baryons in and out of 8 galaxies with halo masses M_vir ~= 1e10, 1e11, 1e12, and 1e13 Msun at z=0 and two different ("violent" and "quiescent") assembly histories. The numerical techniques and implementations used in this project include the smoothed particle hydrodynamics codes GADGET and GASOLINE, and the adaptive mesh refinement codes ART, ENZO, and RAMSES. The codes will share common initial conditions and common astrophysics packages including UV background, metal-dependent radiative cooling, metal and energy yields of supernovae, and stellar initial mass function. These are described in detail in the present paper. Subgrid star formation and feedback prescriptions will be tuned to provide a realistic interstellar and circumgalactic medium using a non-cosmological disk galaxy simulation. Cosmological runs will be systematically compared with each other using a common analysis toolkit, and validated against observations to verify that the solutions are robust - i.e., that the astrophysical assumptions are responsible for any success, rather than artifacts of particular implementations. The goals of the AGORA project are, broadly speaking, to raise the realism and predictive power of galaxy simulations and the understanding of the feedback processes that regulate galaxy "metabolism." The proof-of-concept dark matter-only test of the formation of a galactic halo with a z=0 mass of M_vir ~= 1.7e11 Msun by 9 different versions of the participating codes is also presented to validate the infrastructure of the project.
△ Less
Submitted 24 December, 2013; v1 submitted 12 August, 2013;
originally announced August 2013.
-
Dwarf Galaxies with Ionizing Radiation Feedback. II: Spatially-resolved Star Formation Relation
Authors:
Ji-hoon Kim,
Mark R. Krumholz,
John H. Wise,
Matthew J. Turk,
Nathan J. Goldbaum,
Tom Abel
Abstract:
We investigate the spatially-resolved star formation relation using a galactic disk formed in a comprehensive high-resolution (3.8 pc) simulation. Our new implementation of stellar feedback includes ionizing radiation as well as supernova explosions, and we handle ionizing radiation by solving the radiative transfer equation rather than by a subgrid model. Photoheating by stellar radiation stabili…
▽ More
We investigate the spatially-resolved star formation relation using a galactic disk formed in a comprehensive high-resolution (3.8 pc) simulation. Our new implementation of stellar feedback includes ionizing radiation as well as supernova explosions, and we handle ionizing radiation by solving the radiative transfer equation rather than by a subgrid model. Photoheating by stellar radiation stabilizes gas against Jeans fragmentation, reducing the star formation rate. Because we have self-consistently calculated the location of ionized gas, we are able to make spatially-resolved mock observations of star formation tracers, such as H-alpha emission. We can also observe how stellar feedback manifests itself in the correlation between ionized and molecular gas. Applying our techniques to the disk in a galactic halo of 2.3e11 Msun, we find that the correlation between star formation rate density (estimated from mock H-alpha emission) and molecular hydrogen density shows large scatter, especially at high resolutions of <~ 75 pc that are comparable to the size of giant molecular clouds (GMCs). This is because an aperture of GMC size captures only particular stages of GMC evolution, and because H-alpha traces hot gas around star-forming regions and is displaced from the molecular hydrogen peaks themselves. By examining the evolving environment around star clusters, we speculate that the breakdown of the traditional star formation laws of the Kennicutt-Schmidt type at small scales is further aided by a combination of stars drifting from their birthplaces, and molecular clouds being dispersed via stellar feedback.
△ Less
Submitted 8 March, 2018; v1 submitted 25 October, 2012;
originally announced October 2012.
-
Dwarf Galaxies with Ionizing Radiation Feedback. I: Escape of Ionizing Photons
Authors:
Ji-hoon Kim,
Mark R. Krumholz,
John H. Wise,
Matthew J. Turk,
Nathan J. Goldbaum,
Tom Abel
Abstract:
We describe a new method for simulating ionizing radiation and supernova feedback in the analogues of low-redshift galactic disks. In this method, which we call star-forming molecular cloud (SFMC) particles, we use a ray-tracing technique to solve the radiative transfer equation for ultraviolet photons emitted by thousands of distinct particles on the fly. Joined with high numerical resolution of…
▽ More
We describe a new method for simulating ionizing radiation and supernova feedback in the analogues of low-redshift galactic disks. In this method, which we call star-forming molecular cloud (SFMC) particles, we use a ray-tracing technique to solve the radiative transfer equation for ultraviolet photons emitted by thousands of distinct particles on the fly. Joined with high numerical resolution of 3.8 pc, the realistic description of stellar feedback helps to self-regulate star formation. This new feedback scheme also enables us to study the escape of ionizing photons from star-forming clumps and from a galaxy, and to examine the evolving environment of star-forming gas clumps. By simulating a galactic disk in a halo of 2.3e11 Msun, we find that the average escape fraction from all radiating sources on the spiral arms (excluding the central 2.5 kpc) fluctuates between 0.08% and 5.9% during a ~20 Myr period with a mean value of 1.1%. The flux of escaped photons from these sources is not strongly beamed, but manifests a large opening angle of more than 60 degree from the galactic pole. Further, we investigate the escape fraction per SFMC particle, f_esc(i), and how it evolves as the particle ages. We discover that the average escape fraction f_esc is dominated by a small number of SFMC particles with high f_esc(i). On average, the escape fraction from a SFMC particle rises from 0.27% at its birth to 2.1% at the end of a particle lifetime, 6 Myrs. This is because SFMC particles drift away from the dense gas clumps in which they were born, and because the gas around the star-forming clumps is dispersed by ionizing radiation and supernova feedback. The framework established in this study brings deeper insight into the physics of photon escape fraction from an individual star-forming clump, and from a galactic disk.
△ Less
Submitted 8 March, 2018; v1 submitted 11 October, 2012;
originally announced October 2012.
-
The Global Evolution of Giant Molecular Clouds II: The Role of Accretion
Authors:
Nathan J. Goldbaum,
Mark R. Krumholz,
Christopher D. Matzner,
Christopher F. McKee
Abstract:
We present virial models for the global evolution of giant molecular clouds. Focusing on the presence of an accretion flow, and accounting for the amount of mass, momentum, and energy supplied by accretion and star formation feedback, we are able to follow the growth, evolution, and dispersal of individual giant molecular clouds. Our model clouds reproduce the scaling relations observed in both ga…
▽ More
We present virial models for the global evolution of giant molecular clouds. Focusing on the presence of an accretion flow, and accounting for the amount of mass, momentum, and energy supplied by accretion and star formation feedback, we are able to follow the growth, evolution, and dispersal of individual giant molecular clouds. Our model clouds reproduce the scaling relations observed in both galactic and extragalactic clouds. We find that accretion and star formation contribute contribute roughly equal amounts of turbulent kinetic energy over the lifetime of the cloud. Clouds attain virial equilibrium and grow in such a way as to maintain roughly constant surface densities, with typical surface densities of order 50 - 200 Msun pc^-2, in good agreement with observations of giant molecular clouds in the Milky Way and nearby external galaxies. We find that as clouds grow, their velocity dispersion and radius must also increase, implying that the linewidth-size relation constitutes an age sequence. Lastly, we compare our models to observations of giant molecular clouds and associated young star clusters in the LMC and find good agreement between our model clouds and the observed relationship between H ii regions, young star clusters, and giant molecular clouds.
△ Less
Submitted 15 June, 2011; v1 submitted 30 May, 2011;
originally announced May 2011.
-
The Intensity Profile of the Solar Supergranulation
Authors:
N. J. Goldbaum,
M. P. Rast,
I. Ermolli,
J. S. Sands,
F. Berrilli
Abstract:
We have measured the average radial (cell center to network boundary) profile of the continuum intensity contrast associated with supergranular flows using data from the Precision Solar Photometric Telescope (PSPT) at the Mauna Loa Solar Observatory (MLSO). After removing the contribution of the network flux elements by the application of masks based on Ca II K intensity and averaging over more…
▽ More
We have measured the average radial (cell center to network boundary) profile of the continuum intensity contrast associated with supergranular flows using data from the Precision Solar Photometric Telescope (PSPT) at the Mauna Loa Solar Observatory (MLSO). After removing the contribution of the network flux elements by the application of masks based on Ca II K intensity and averaging over more than 10^5 supergranular cells, we find a ~ 0.1% decrease in red and blue continuum intensity from the supergranular cell centers outward, corresponding to a ~ 1.0 K decrease in brightness temperature across the cells. The radial intensity profile may be caused either by the thermal signal associated with the supergranular flows or a variation in the packing density of unresolved magnetic flux elements. These are not unambiguously distinguished by the observations, and we raise the possibility that the network magnetic fields play an active role in supergranular scale selection by enhancing the radiative cooling of the deep photosphere at the cell boundaries.
△ Less
Submitted 18 September, 2009;
originally announced September 2009.
