Showing 1–4 of 4 results for author: Goc, K

Studies of Transonic Aircraft Flows and Prediction of Initial Buffet Onset Using Large-Eddy Simulations

Authors: Konrad A. Goc, Rahul Agrawal, Sanjeeb T. Bose, Parviz Moin

Abstract: This article utilizes the Large-Eddy Simulation (LES) paradigm with a physics-based turbulence modeling approach, including a dynamic subgrid-scale model and an equilibrium wall model, to examine the flow over the NASA transonic Common Research Model (CRM), a flow configuration that has been the focus of several AIAA Drag PredictionWorkshops (DPWs). The current work explores sensitivities to lamin… ▽ More This article utilizes the Large-Eddy Simulation (LES) paradigm with a physics-based turbulence modeling approach, including a dynamic subgrid-scale model and an equilibrium wall model, to examine the flow over the NASA transonic Common Research Model (CRM), a flow configuration that has been the focus of several AIAA Drag PredictionWorkshops (DPWs). The current work explores sensitivities to laminar-to-turbulent transition, wind tunnel mounting system, grid resolution, and grid topology and suggests current best practices in the context of large-eddy simulations of transonic aircraft flows. It is found that promoting the flow transition to turbulence via an array of cylindrical trip dots, including the sting mounting system in the simulations, and leveraging stranded boundary layer grids all tend to improve the quality of the LES solutions. Non-monotonic grid convergence in the LES calculations is observed to be strongly sensitive to grid topology, and stranded meshes rectify this issue relative to their hexagonal close-packed (HCP) counterparts. The details of the boundary layer profiles both at the leading edge of the wing and within the shock-induced separation bubble are studied, with thicknesses and integral measures reported, providing details about the boundary layer characteristics to turbulence modelers not typically available from complex aircraft flows. Finally, an assessment of the initial buffet prediction capabilities of LES is made in the context of a simpler NACA 0012 flow, with computational predictions showing reasonable agreement with available experimental data for the angle of attack at initial buffet onset and shock oscillation frequency associated with sustained buffet. △ Less

Submitted 9 July, 2024; originally announced July 2024.

Comments: Under review for publication consideration in the Journal of Aircraft

Building-block flow model for computational fluids

Authors: Gonzalo Arranz, Yuenong Ling, Sam Costa, Konrad Goc, Adrian Lozano-Duran

Abstract: We introduce a closure model for wall-modeled large-eddy simulation (WMLES), referred to as the Building-block Flow Model (BFM). The foundation of the model rests on the premise that a finite collection of simple flows encapsulates the essential physics necessary to predict more complex scenarios. The BFM is implemented using artificial neural networks and introduces five advancements within the f… ▽ More We introduce a closure model for wall-modeled large-eddy simulation (WMLES), referred to as the Building-block Flow Model (BFM). The foundation of the model rests on the premise that a finite collection of simple flows encapsulates the essential physics necessary to predict more complex scenarios. The BFM is implemented using artificial neural networks and introduces five advancements within the framework of WMLES: (1) It is designed to predict multiple flow regimes (wall turbulence under zero, favorable, adverse mean-pressure-gradient, and separation); (2) It unifies the closure model at solid boundaries (i.e., the wall model) and the rest of the flow (i.e., the subgrid-scale model) into a single entity; (3) It ensures consistency with numerical schemes and gridding strategy by accounting for numerical errors; (4) It is directly applicable to arbitrary complex geometries; (5) It can be scaled up to model additional flow physics in the future if needed (e.g., shockwaves and laminar-to-turbulent transition). The BFM is utilized to predict key quantities of interest in turbulent channel and pipe flows, a Gaussian bump, a simplified aircraft, and a realistic aircraft in landing configuration. In all cases, the BFM demonstrates similar or superior capabilities in terms of accuracy and computational efficiency compared to previous state-of-the-art closure models. △ Less

Submitted 14 June, 2024; v1 submitted 13 March, 2024; originally announced March 2024.

Large-eddy simulations of the NACA23012 airfoil with laser-scanned ice shapes

Authors: Brett Bornhoft, Suhas S. Jain, Konrad Goc, Sanjeeb T. Bose, Parviz Moin

Abstract: In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geom… ▽ More In this study, five ice shapes generated at NASA Glenn's Icing Research Tunnel (IRT) are simulated at multiple angles of attack (Broeren et al., J. of Aircraft, 2018). These geometries target different icing environments, both early-time and longer-duration glaze and rime ice exposure events, including a geometry that results from using a thermal ice-protection system. Using the laser-scanned geometries, detailed representations of the three-dimensional ice geometries are resolved on the grid and simulated using wall-modeled LES. Integrated loads (lift, drag, and moment coefficients) and pressure distributions are compared against experimental measurements in both clean and iced conditions for several angles of attack in both pre-and post-stall regions. The relevant comparisons to the experimental results show that qualitative and acceptable quantitative agreement with the data is observed across all geometries. Glaze ice formations exhibit larger and highly nonuniform ice features, such as `horns', in contrast to rime ice formations characterized by smaller, uniformly distributed roughness elements. In wall-modeled LES, it was observed that larger roughness scales in the glaze ice that trigger transition can be accurately resolved. Therefore, it is possible for WMLES to accurately capture the aerodynamics of glaze ice shapes without the need for additional modeling. In contrast, rime ice geometries required additional resolution to accurately represent the aerodynamic loads. This study demonstrates the effectiveness of the wall-modeled LES technique in simulating the complex aerodynamic effects of iced airfoils, providing valuable insights for aircraft design in icing environments and highlighting the importance of accurately representing ice geometries and roughness scales in simulations. △ Less

Submitted 22 September, 2023; originally announced September 2023.

Wall-modeled large-eddy simulation based on building-block flows

Authors: Yuenong Ling, Gonzalo Arranz, Emily Williams, Konrad Goc, Kevin Griffin, Adrián Lozano-Durán

Abstract: A unified subgrid-scale (SGS) and wall model for large-eddy simulation (LES) is proposed by devising the flow as a collection of building blocks that enables the prediction of the eddy viscosity. The core assumption of the model is that simple canonical flows contain the essential physics to provide accurate predictions of the SGS tensor in more complex flows. The model is constructed to predict z… ▽ More A unified subgrid-scale (SGS) and wall model for large-eddy simulation (LES) is proposed by devising the flow as a collection of building blocks that enables the prediction of the eddy viscosity. The core assumption of the model is that simple canonical flows contain the essential physics to provide accurate predictions of the SGS tensor in more complex flows. The model is constructed to predict zero-pressure-gradient wall-bounded turbulence, adverse pressure gradient effects, separation and laminar flow. The approach is implemented using a Bayesian classifier, which identifies the contribution of each building block in the flow, and a neural-network-based predictor, which estimates the eddy viscosity based on the building-block units. The training data are directly obtained from wall-modeled LES with an exact SGS/wall model for the mean quantities to guarantee consistency with the numerical discretization. The model is validated in canonical flows and the NASA High-Lift Common Research Model and shown to improve the predictions with respect to current modeling approaches. △ Less

Submitted 17 December, 2022; v1 submitted 9 December, 2022; originally announced December 2022.