-
Detecting and Focusing on a Nonlinear Target in a Complex Medium
Authors:
Antton Goïcoechea,
Jakob Hüpfl,
Stefan Rotter,
François Sarrazin,
Matthieu Davy
Abstract:
Wavefront sha** techniques allow waves to be focused on a diffraction-limited target deep inside disordered media. To identify the target position, a guidestar is required that typically emits a frequency-shifted signal. Here we present a noninvasive matrix approach operating at a single frequency only, based on the variation of the field scattered by a nonlinear target illuminated at two incide…
▽ More
Wavefront sha** techniques allow waves to be focused on a diffraction-limited target deep inside disordered media. To identify the target position, a guidestar is required that typically emits a frequency-shifted signal. Here we present a noninvasive matrix approach operating at a single frequency only, based on the variation of the field scattered by a nonlinear target illuminated at two incident powers. The local perturbation induced by the nonlinearity serves as a guide for identifying optimal incident wavefronts. We demonstrate maximal focusing on electronic devices embedded in chaotic microwave cavities and extend our approach to temporal signals. Finally, we exploit the programmability offered by reconfigurable smart surfaces to enhance the intensity delivered to a nonlinear target. Our results pave the way for deep imaging protocols that use any type of nonlinearity as feedback, requiring only the measurement of a monochromatic scattering matrix.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Reflection Measurement of the Scattering Mean Free Path at the Onset of Multiple Scattering
Authors:
Antton Goïcoechea,
Cécile Brütt,
Arthur Le Ber,
Flavien Bureau,
William Lambert,
Claire Prada,
Arnaud Derode,
Alexandre Aubry
Abstract:
Multiple scattering of waves presents challenges for imaging complex media but offers potential for their characterization. Its onset is actually governed by the scattering mean free path $\ell_s$ that provides crucial information on the medium micro-architecture. Here, we introduce a reflection matrix method designed to estimate this parameter from the time decay of the single scattering rate. Ou…
▽ More
Multiple scattering of waves presents challenges for imaging complex media but offers potential for their characterization. Its onset is actually governed by the scattering mean free path $\ell_s$ that provides crucial information on the medium micro-architecture. Here, we introduce a reflection matrix method designed to estimate this parameter from the time decay of the single scattering rate. Our method is first validated by means of an ultrasound experiment on a tissue-mimicking phantom. An in-vivo measurement of $\ell_s$ is then performed in the human liver. This study thus opens important perspectives for quantitative imaging whether it be for non-destructive testing or biomedical applications.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Self-Diffusion and Structure of a Quasi Two-Dimensional, Classical Coulomb Gas Under Increasing Magnetic Field and Temperature
Authors:
J. D. Hernández Velázquez,
Z. Nussinov,
A. Gama Goicochea
Abstract:
The influence of a magnetic field applied perpendicularly to the plane of a quasi two dimensional, low density classical Coulomb gas, with interparticle potential U of r as 1 over r, is studied using momentum conserving dissipative particle dynamics simulations. The self diffusion and structure of the gas are studied as functions of temperature and strength of the magnetic field. It is found that…
▽ More
The influence of a magnetic field applied perpendicularly to the plane of a quasi two dimensional, low density classical Coulomb gas, with interparticle potential U of r as 1 over r, is studied using momentum conserving dissipative particle dynamics simulations. The self diffusion and structure of the gas are studied as functions of temperature and strength of the magnetic field. It is found that the gas undergoes a topological phase transition when the temperature is varied, in accord with the Bohr van Leeuwen BvL theorem, the structural properties being unaffected, resembling those of the strictly two dimensional Kosterlitz Thouless transition, with U of r as varying as ln r. Consistent with the BvL theorem, the transition temperature and the melting process of the condensed phase are unchanged by the field. Conversely, the self diffusion coefficient of the gas is strongly reduced by the magnetic field. At the largest values of the cyclotron frequency, the self diffusion coefficient is inversely proportional to the applied magnetic field. The implications of these results are discussed.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
The Effective Interfacial Tensions between Pure Liquids and Rough Solids: A Coarse-Grained Simulation Study
Authors:
Juan de Dios Hernández Velázquez,
Gregorio Sánchez-Balderas,
Armando Gama Goicochea,
Elías Pérez
Abstract:
The effective solid liquid interfacial tension (SL IFT) between pure liquids and rough solid surfaces is studied through coarse grained simulations. Using the dissipative particle dynamics method, we design solid liquid interfaces, confining a pure liquid between two explicit solid surfaces with different roughness degrees. The roughness of the solid phase was characterized by Wenzel roughness fac…
▽ More
The effective solid liquid interfacial tension (SL IFT) between pure liquids and rough solid surfaces is studied through coarse grained simulations. Using the dissipative particle dynamics method, we design solid liquid interfaces, confining a pure liquid between two explicit solid surfaces with different roughness degrees. The roughness of the solid phase was characterized by Wenzel roughness factor and the effective SL IFT (γ_sl^') is reported as a function of it also. Two solid liquid systems differentiated from each other by their solid liquid repulsion strength are studied to measure the effects caused by the surface roughness on the calculation of γ_sl^'. We found that the roughness produces changes in the structure of the liquid, which is observed in the first layer of liquid near the solid. These changes are responsible for the effective SL IFT increase as surface roughness increases. Although there is a predominance of surface roughness in the calculation of γ_sl^', it is found that the effective SL IFT is directly proportional to the magnitude of the solid liquid repulsion strength. The insights provided by these simulations suggest that the increase of Wenzel roughness factor is a direct consequence of the increase in surface area due to the vertical deviations measured in the topography. This, in turn, produces an increase in the number of effective solid liquid interactions between particles, eventually yielding significant changes in the local values of the normal and tangential components of the pressure tensor.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
The Viscosity of Polyelectrolyte Solutions and its Dependence on their Persistence Length, Concentration and Solvent Quality
Authors:
Estela Mayoral,
Juan de Dios Hernández Velázquez,
Armando Gama Goicochea
Abstract:
In this work, a comprehensive study about the influence on shear viscosity of polyelectrolyte concentration, persistence length, salt concentration and solvent quality is reported, using numerical simulations of confined solutions under stationary Poiseuille flow. Various scaling regimes for the viscosity are reproduced, both under good solvent and theta solvent conditions. The key role played by…
▽ More
In this work, a comprehensive study about the influence on shear viscosity of polyelectrolyte concentration, persistence length, salt concentration and solvent quality is reported, using numerical simulations of confined solutions under stationary Poiseuille flow. Various scaling regimes for the viscosity are reproduced, both under good solvent and theta solvent conditions. The key role played by the electrostatic interactions in the viscosity is borne out when the ionic strength is varied. It is argued that these results are helpful for the understanding of viscosity scaling in entangled polyelectrolyte solutions for both rigid and flexible polyelectrolytes in different solvents, which is needed to perform intelligent design of new polyelectrolytes capable of fine tuning the viscosity in complex fluids.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
Topological Phase Transition in a Quasi Two Dimensional Coulomb Gas
Authors:
A. Gama Goicochea,
Z. Nussinov
Abstract:
A system with equal number of positive and negative charges confined in a box with a small but finite thickness is modeled as a function of temperature using mesoscale numerical simulations, for various values of the charges. The Coulomb interaction is used in its three-dimensional form, U(r) ~ 1/r. A topological phase transition is found in this quasi 2d system. The translational order parameter,…
▽ More
A system with equal number of positive and negative charges confined in a box with a small but finite thickness is modeled as a function of temperature using mesoscale numerical simulations, for various values of the charges. The Coulomb interaction is used in its three-dimensional form, U(r) ~ 1/r. A topological phase transition is found in this quasi 2d system. The translational order parameter, spatial correlation function, specific heat, and electric current show qualitatively different trends below and above a critical temperature. We find that a 2d logarithmic Coulomb interaction is not essential for the appearance of this transition. This work suggests new experimental tests of our predictions, as well as novel theoretical approaches to probe quasi 2d topological phase transitions.
△ Less
Submitted 6 January, 2023; v1 submitted 2 August, 2022;
originally announced August 2022.
-
Modeling of Branched Thickening Polymers under Poiseuille Flow Gives Clues as to how to Increase a Solvent Viscosity
Authors:
E. Mayoral,
A. Gama Goicochea
Abstract:
The viscosity enhancement of a solvent produced by the addition of thickening branched polymers is predicted as a function of polymer concentration, branch length and persistence length, and strength of the covalent bonding interactions. Non equilibrium, stationary state Poiseuille numerical simulations are performed using the dissipative particle dynamics model to obtain the viscosity of the flui…
▽ More
The viscosity enhancement of a solvent produced by the addition of thickening branched polymers is predicted as a function of polymer concentration, branch length and persistence length, and strength of the covalent bonding interactions. Non equilibrium, stationary state Poiseuille numerical simulations are performed using the dissipative particle dynamics model to obtain the viscosity of the fluid. It is found that the clustering of the polymers into aggregates raises the viscosity and that it is more strongly affected by the strength of the bonding interactions. General scaling relationships are found for the viscosity as a function of the variables studied, which are expected to be useful for the design and synthesis of new viscosifying polymers. It is argued that our results can be applied to aqueous thickeners, of importance for colloidal fluids such as paints and coatings, and also for nonpolar fluids such as supercritical CO2, which is a promising non hydraulic fracking fluid also useful in enhanced oil recovery.
△ Less
Submitted 29 July, 2021;
originally announced July 2021.
-
Self assembly of model surfactants as reverse micelles in nonpolar solvents and their role as interfacial tension modifiers
Authors:
E. Mayoral,
J. A. Arcos-Casarrubias,
A. Gama Goicochea
Abstract:
The self assembly of linear surfactants into reverse micelles (RMs) in nonpolar solvents and their efficiency in reducing the interfacial tension is studied using dissipative particle dynamics simulations. Given the importance of RMs as thickeners, among many other applications, their properties are studied here when formed in oil and in supercritical carbon dioxide (scCO2). Our simulations are fo…
▽ More
The self assembly of linear surfactants into reverse micelles (RMs) in nonpolar solvents and their efficiency in reducing the interfacial tension is studied using dissipative particle dynamics simulations. Given the importance of RMs as thickeners, among many other applications, their properties are studied here when formed in oil and in supercritical carbon dioxide (scCO2). Our simulations are found to be in agreement with experimental results of surfactant self assembly in scCO2 that found viscosity increments of up to 90 percent with 10 wt percent of surfactants. The role played by a small number of water molecules in RM formation is studied as well in both solvents, corroborating experiments reporting the enhancement of RM formation with the addition of a small quantity of water. The dynamics of water surfactant aggregation in nonpolar solvents is also discussed. Lastly, the performance of the model surfactant as an interfacial tension modifier is studied in detail. The results show that RMs are more easily formed in oil than in scCO2 and that the effectiveness of the surfactant in reducing the interfacial tension lies in its preference to adsorb at interfaces rather than self association.
△ Less
Submitted 29 July, 2021;
originally announced July 2021.
-
Anisotropy of localized states in an anisotropic disordered medium
Authors:
Antton Goïcoechea,
John H. Page,
Sergey E. Skipetrov
Abstract:
We study Anderson localization of a scalar wave in an ensemble of resonant point scatterers embedded in an anisotropic background medium. For uniaxial anisotropy of moderate strength, the mobility edges and the critical exponent of the localization transition are found to be unaffected by the anisotropy provided that the determinant of the anisotropy tensor is kept equal to one upon introducing th…
▽ More
We study Anderson localization of a scalar wave in an ensemble of resonant point scatterers embedded in an anisotropic background medium. For uniaxial anisotropy of moderate strength, the mobility edges and the critical exponent of the localization transition are found to be unaffected by the anisotropy provided that the determinant of the anisotropy tensor is kept equal to one upon introducing the anisotropy. Localized modes have anisotropic spatial shapes although their anisotropy is weaker than the one expected from purely geometric considerations. The modes with the longest lifetimes are found to be the most anisotropic and their anisotropy increases with the size of the disordered medium.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Suppression of transport anisotropy at the Anderson localization transition in three-dimensional anisotropic media
Authors:
Antton Goïcoechea,
Sergey E. Skipetrov,
John H. Page
Abstract:
We study the transport of classical waves through three-dimensional (3D) anisotropic media close to the Anderson localization transition. Time-, frequency-, and position-resolved ultrasonic measurements are performed on anisotropic slab-shaped mesoglass samples to probe the dynamics and the anisotropy of the multiple scattering halo, and hence to investigate the influence of disorder on the nature…
▽ More
We study the transport of classical waves through three-dimensional (3D) anisotropic media close to the Anderson localization transition. Time-, frequency-, and position-resolved ultrasonic measurements are performed on anisotropic slab-shaped mesoglass samples to probe the dynamics and the anisotropy of the multiple scattering halo, and hence to investigate the influence of disorder on the nature of wave transport and its anisotropy. These experiments allow us to address conflicting theoretical predictions that have been made about whether or not the transport anisotropy is affected by the interference effects that lead to Anderson localization. We find that the transport anisotropy is significantly reduced as the mobility edge is approached---a behavior similar to the one predicted recently for matter waves in infinite anisotropic 3D media.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Study of polymer solvent interactions of complex polysiloxanes using dissipative particle dynamics
Authors:
Javier Vallejo-Montesinos,
Antonio Villegas,
Jorge Cervantes,
Elías Pérez,
Armando Gama Goicochea
Abstract:
The mesoscopic modeling of three polysiloxanes in solution is reported in this work, with the purpose of predicting their physicochemical properties as functions of the quality of the solvent, so that a judicious choice of polymer/solvent can be made for various applications. The polymers studied were the following polysiloxanes: polydimethylsiloxane (PDMS), polysiloxane with a bulky alkyl side gr…
▽ More
The mesoscopic modeling of three polysiloxanes in solution is reported in this work, with the purpose of predicting their physicochemical properties as functions of the quality of the solvent, so that a judicious choice of polymer/solvent can be made for various applications. The polymers studied were the following polysiloxanes: polydimethylsiloxane (PDMS), polysiloxane with a bulky alkyl side group (PMHS) and a siloxane copolymer with a hydrophilic polar side group (P2DMPAS). The model used and solved through numerical simulations is the one known as dissipative particle dynamics. Density profiles and radial distribution functions were calculated for each system. We analyzed how the polymers behave in the presence of solvents of varying quality and compared their behavior with experimental data. We observed that we could replicate the behavior in good solvents for PDMS and PMHS. We also observed in the simulation box the formation of pseudo-micelles for P2DMPAS.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Fractal Properties of Biophysical Models of Pericellular Brushes Can Be Used to Differentiate Between Cancerous and Normal Cervical Epithelial Cells
Authors:
J. D. Hernández Velázquez,
S. Mejía-Rosales,
A. Gama Goicochea
Abstract:
Fractal behavior is found on the topographies of pericellular brushes on the surfaces of model healthy and cancerous cells, using dissipative particle dynamics models and simulations. The influence of brush composition, chain stiffness and solvent quality on the fractal dimension is studied in detail. Since fractal dimension alone cannot guarantee that the brushes possess fractal properties, their…
▽ More
Fractal behavior is found on the topographies of pericellular brushes on the surfaces of model healthy and cancerous cells, using dissipative particle dynamics models and simulations. The influence of brush composition, chain stiffness and solvent quality on the fractal dimension is studied in detail. Since fractal dimension alone cannot guarantee that the brushes possess fractal properties, their lacunarity was obtained also, which is a measure of the space filling capability of fractal objects. Soft polydisperse brushes are found to have larger fractal dimension than soft monodisperse ones, under poor solvent conditions, in agreement with recent experiments on dried cancerous and healthy human cervical epithelial cells. Additionally, we find that image resolution is critical for the accurate assessment of differences between images from different cells. The images of the brushes on healthy model cells are found to be more textured than those of brushes on model cancerous cells, as indicated by the larger lacunarity of the former. These findings are helpful to distinguish monofractal behavior from multifractality, which has been found to be useful to discriminate between immortal, cancerous and normal cells in recent experiments.
△ Less
Submitted 15 June, 2018;
originally announced June 2018.
-
Surfactant chain length and concentration influence on the interfacial tension of two immiscible model liquids a coarse grained approach
Authors:
R. Catarino Centeno,
R. A. Bustamante - Rendón,
J. S. Hernández - Fragoso,
I. Arroyo - Ordoñez,
E. Pérez,
S. J. Alas,
A. Gama Goicochea
Abstract:
The interfacial tension between immiscible liquids is studied as a function of a model linear surfactant length and concentration using coarse grained, dissipative particle dynamics numerical simulations. The adsorption isotherms obtained from the simulations are found to be in agreement with Langmuir model. The reduction of the interfacial tension with increasing surfactant concentration is found…
▽ More
The interfacial tension between immiscible liquids is studied as a function of a model linear surfactant length and concentration using coarse grained, dissipative particle dynamics numerical simulations. The adsorption isotherms obtained from the simulations are found to be in agreement with Langmuir model. The reduction of the interfacial tension with increasing surfactant concentration is found to display some common characteristics for all the values of chain length modeled, with our predictions being in agreement with Szyszkowski equation. Lastly, the critical micelle concentration is predicted for all surfactant lengths, finding exponentially decaying behavior, in agreement with Kleven model. It is argued that these findings can be helpful guiding tools in the interpretation of available experiments and in the design of new ones with new surfactants and polymers.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Desorption of hydrocarbon chains by association with ionic and nonionic surfactants under flow as a mechanism for enhanced oil recovery
Authors:
Ketzasmin A. Terrón-Mejía,
Roberto López-Rendon,
Armando Gama Goicochea
Abstract:
The need to extract oil from wells where it is embedded on the surfaces of rocks has led to the development of new and improved enhanced oil recovery techniques. One of those is the injection of surfactants with water vapor, which promotes desorption of oil that can then be extracted using pumps, as the surfactants encapsulate the oil in foams. However, the mechanisms that lead to the optimal deso…
▽ More
The need to extract oil from wells where it is embedded on the surfaces of rocks has led to the development of new and improved enhanced oil recovery techniques. One of those is the injection of surfactants with water vapor, which promotes desorption of oil that can then be extracted using pumps, as the surfactants encapsulate the oil in foams. However, the mechanisms that lead to the optimal desorption of oil and the best type of surfactants to carry out desorption are not well known yet, which warrants the need to carry out basic research on this topic. In this work, we report non equilibrium dissipative particle dynamics simulations of model surfactants and oil molecules adsorbed on surfaces, with the purpose of studying the efficiency of the surfactants to desorb hydrocarbon chains, that are found adsorbed over flat surfaces. The model surfactants studied correspond to nonionic and cationic surfactants, and the hydrocarbon desorption is studied as a function of surfactant concentration under increasing Poiseuille flow. We obtain various hydrocarbon desorption isotherms for every model of surfactant proposed, under flow. Nonionic surfactants are found to be the most effective to desorb oil and the mechanisms that lead to this phenomenon are presented and discussed.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
Scaling features of the tribology of polymer brushes of increasing grafting density around the mushroom to brush transition
Authors:
E. Mayoral,
J. Klapp,
A. Gama Goicochea
Abstract:
Non equilibrium coarse grained, dissipative particle dynamics simulations of complex fluids, made up of polymer brushes tethered to planar surfaces immersed in a solvent yield non monotonic behavior of the friction coefficient as a function of the polymer grating density on the substrates, Γ, while the viscosity shows a monotonically increasing dependence on Γ. This effect is shown to be independe…
▽ More
Non equilibrium coarse grained, dissipative particle dynamics simulations of complex fluids, made up of polymer brushes tethered to planar surfaces immersed in a solvent yield non monotonic behavior of the friction coefficient as a function of the polymer grating density on the substrates, Γ, while the viscosity shows a monotonically increasing dependence on Γ. This effect is shown to be independent of the degree of polymerization, N, and the size of the system. It arises from the composition and the structure of the first particle layer adjacent to each surface that results from the confinement of the fluid. Whenever such layers are made up of as close a proportion of polymer beads to solvent particles as there are in the fluid, the friction coefficient shows a minimum, while for disparate proportions the friction coefficient grows. At the mushroom to brush transition (MBT) the viscosity scales with an exponent that depends on the characteristic exponent of the MBT (6/5) and the solvent quality exponent (ν= 0.5, for theta solvent), but it is independent of the polymerization degree (N). On the other hand, the friction coefficient at the MBT scales as μ~N^(6/5), while the grafting density at the MBT scales as Γ~ N^(-6/5) when friction is minimal, in agreement with previous scaling theories. We argue these aspects are the result of cooperative phenomena that have important implications for the understanding of biological brushes and the design of microfluidics devices, among other applications of current academic and industrial interest.
△ Less
Submitted 29 December, 2016;
originally announced December 2016.
-
On finite size effects, ensemble choice and force influence in dissipative particle dynamics simulations
Authors:
Miguel Ángel Balderas Altamirano,
Elías Pérez,
Armando Gama Goicochea
Abstract:
The influence of finite size effects, choice of statistical ensemble and contribution of the forces in numerical simulations using the dissipative particle dynamics (DPD) model are revisited here. Finite size effects in stress anisotropy, interfacial tension and dynamic viscosity are computed and found to be minimal with respect to other models. Additionally, the choice of ensemble is found to be…
▽ More
The influence of finite size effects, choice of statistical ensemble and contribution of the forces in numerical simulations using the dissipative particle dynamics (DPD) model are revisited here. Finite size effects in stress anisotropy, interfacial tension and dynamic viscosity are computed and found to be minimal with respect to other models. Additionally, the choice of ensemble is found to be of fundamental importance for the accurate calculation of properties such as the solvation pressure, especially for relatively small systems. Lastly, the contribution of the random, dissipative and conservative forces that make up the DPD model in the prediction of properties of simple liquids such as the pressure is studied as well. Some tricks of the trade are provided, which may be useful for those carrying out high-performance numerical simulations using the DPD model.
△ Less
Submitted 6 December, 2016;
originally announced December 2016.
-
Scaling properties of soft matter in equilibrium and under stationary flow
Authors:
Armando Gama Goicochea
Abstract:
A brief review is presented of the scaling of complex fluids, polymers and polyelectrolytes in solution and in confined geometry, in thermodynamical, structural and rheology properties using equilibrium and nonequilibrium dissipative particle dynamics simulations. All simulations were carried out on high performance computational facilities using parallelized algorithms, solved on computers using…
▽ More
A brief review is presented of the scaling of complex fluids, polymers and polyelectrolytes in solution and in confined geometry, in thermodynamical, structural and rheology properties using equilibrium and nonequilibrium dissipative particle dynamics simulations. All simulations were carried out on high performance computational facilities using parallelized algorithms, solved on computers using both central and graphical processing units. The scaling approach is shown to be a unifying axis around which general trends and basic knowledge can be gained, illustrated through a series of case studies.
△ Less
Submitted 5 December, 2016;
originally announced December 2016.
-
Ab Initio Modeling Of Friction Reducing Agents Shows Quantum Mechanical Interactions Can Have Macroscopic Manifestation
Authors:
J. D. Hernández Velázquez,
J. Barroso Flores,
A. Gama Goicochea
Abstract:
Two of the most commonly encountered friction reducing agents used in plastic sheet production are the amides known as erucamide and behenamide, which despite being almost identical chemically, lead to markedly different values of the friction coefficient. To understand the origin of this contrasting behavior, in this work we model brushes made of these two types of linear chain molecules using qu…
▽ More
Two of the most commonly encountered friction reducing agents used in plastic sheet production are the amides known as erucamide and behenamide, which despite being almost identical chemically, lead to markedly different values of the friction coefficient. To understand the origin of this contrasting behavior, in this work we model brushes made of these two types of linear chain molecules using quantum mechanical numerical simulations under the Density Functional Theory at the B97D/6-31G(d,p)level of theory. Four chains of erucamide and behenamide were linked to a 2X10 zigzag graphene sheet and optimized both in vacuum and in continuous solvent using the SMD implicit solvation model. We find that erucamide chains tend to remain closer together through ππ stacking interactions arising from the double bonds located at C13 C14, a feature behenamide lacks and thus a more spread configuration is obtained with the latter. It is argued that this arrangement of the erucamide chains is responsible for the lower friction coefficient of erucamide brushes, compared with behenamide brushes, which is a macroscopic consequence of cooperative quantum mechanical interactions. While only quantum level interactions are modeled here, we show that behenamide chains are more spread out in the brush than erucamide chains as a consequence of those interactions. The spread out configuration allows more solvent particles to penetrate the brush, leading in turn to more friction, in agreement with macroscopic measurements and mesoscale simulations of the friction coefficient reported in the literature.
△ Less
Submitted 1 November, 2016;
originally announced November 2016.
-
Electrostatics in dissipative particle dynamics using Ewald sums with point charges
Authors:
K. A. Terrón-Mejía,
R. López-Rendón,
A. Gama Goicochea
Abstract:
A proper treatment of electrostatic interactions is crucial for the accurate calculation of forces in computer simulations. Electrostatic interactions are typically modeled using Ewald based methods, which have become one of the cornerstones upon which many other methods for the numerical computation of electrostatic interactions are based. However, their use with charge distributions rather than…
▽ More
A proper treatment of electrostatic interactions is crucial for the accurate calculation of forces in computer simulations. Electrostatic interactions are typically modeled using Ewald based methods, which have become one of the cornerstones upon which many other methods for the numerical computation of electrostatic interactions are based. However, their use with charge distributions rather than point charges requires the inclusion of ansatz for the solutions of the Poisson equation, since there is no exact solution known for smeared out charges. The interest for incorporating electrostatic interactions at the scales of length and time that are relevant for the study the physics of soft condensed matter has increased considerably. Using mesoscale simulation techniques, such as dissipative particle dynamics (DPD), allows us to reach longer time scales in numerical simulations, without abandoning the particulate description of the problem. The main problem with incorporating electrostatics into DPD simulations is that DPD particles are soft and those particles with opposite charge can form artificial clusters of ions. Here we show that one can incorporate the electrostatic interactions through Ewald sums with point charges in DPD if larger values of coarse graining degree are used, where DPD is truly mesoscopic. Using point charges with larger excluded volume interactions the artificial formation of ionic pairs with point charges can be avoided, and one obtains correct predictions. We establish ranges of parameters useful for detecting boundaries where artificial formation of ionic pairs occurs. Lastly, using point charges we predict the scaling properties of polyelectrolytes in solvents of varying quality and obtain predictions that are in agreement with calculations that use other methods, and with recent experimental results.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Adsorption of polyelectrolytes on silica and gold surfaces
Authors:
M. A. Balderas Altamirano,
R. Camacho,
E. Pérez,
A. Gama Goicochea
Abstract:
The results of a study that helps understand the mechanisms of adsorption of polyelectrolytes on particles, using numerical simulation methods, specifically the one known as dissipative particle dynamics are reported here. The adsorption of cationic polyelectrolytes of two different polymerization degrees interacting with two types of surfaces, one made of gold and the other of silica is predicted…
▽ More
The results of a study that helps understand the mechanisms of adsorption of polyelectrolytes on particles, using numerical simulation methods, specifically the one known as dissipative particle dynamics are reported here. The adsorption of cationic polyelectrolytes of two different polymerization degrees interacting with two types of surfaces, one made of gold and the other of silica is predicted and compared. We find that a more negatively charged wall does not necessarily adsorb more cationic polyelectrolytes because the electrostatic repulsion between the wall and the polyelectrolytes is stronger. Additionally, intra chain repulsion plays an important role, because the largest polyelectrolyte chains have larger excluded volume than the shorter ones. In regard to the adsorption dependence on the polyelectrolyte polymerization degree we find that the excluded volume drives the adsorption throughout the intrachain electrostatic repulsion, because the SiO2 surface is strongly negative. These results are expected to be useful for several nanotechnological applications of current interest, such as in gene therapy and in the improvement of drug delivering mechanisms.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
Friction coefficient and viscosity of polymer brushes with and without free polymers as slip agents
Authors:
A. Gama Goicochea,
R. López-Esparza,
M. A. Balderas Altamirano,
E. Rivera-Paz,
M. A. Waldo-Mendoza,
E. Pérez
Abstract:
There is ample evidence that polymer brushes reduce friction between surfaces. Several industrial applications take advantage of this fact, such as those in plastic bag production, where the brushes act as slip agents; however, the complex mechanisms that give rise to such reduction of friction are not yet fully understood. In this work we report coarse grained, dissipative particle dynamics simul…
▽ More
There is ample evidence that polymer brushes reduce friction between surfaces. Several industrial applications take advantage of this fact, such as those in plastic bag production, where the brushes act as slip agents; however, the complex mechanisms that give rise to such reduction of friction are not yet fully understood. In this work we report coarse grained, dissipative particle dynamics simulations carried out for surfaces functionalized with erukamide brushes, a polymer commonly used in the plastics industry as a slip agent between surfaces. We calculate their rheological properties, such as the coefficient of friction (COF) and the viscosity, η, as functions of the number of chains grafted on the surfaces under the influence of stationary, Couette flow. Moreover, we consider also the case when a fraction of the erukamide chains is not adsorbed and moves freely between the surfaces. We show that the COF reaches an equilibrium value of about 0.29 in these two cases, in agreement with experimental results. On other hand, the viscosity grows monotonically, as a result of the increasing collisions when the erukamide content is increased. The force between brushes is found to be in agreement with predictions from scaling theories. We find that the addition to free chains helps stabilize the film formed by the brushes and the solvent, as others have found experimentally. The mechanisms that give rise to these phenomena are studied in detail.
△ Less
Submitted 14 March, 2016;
originally announced March 2016.
-
A new effective potential for colloidal dispersions with polymer chains emerging from mesoscopic scale interactions
Authors:
K. A. Terrón-Mejía,
R. López-Rendón,
A. Gama Goicochea
Abstract:
A new potential of mean force is proposed for colloidal dispersions, which is obtained from coarse grained, pair interactions between colloidal particles formed by the explicit grou** of particles that are themselves groups of atoms and molecules. Using numerical simulations, we start by constructing colloidal particles made up of 250 mesoscopic particles joined by springs and interacting with e…
▽ More
A new potential of mean force is proposed for colloidal dispersions, which is obtained from coarse grained, pair interactions between colloidal particles formed by the explicit grou** of particles that are themselves groups of atoms and molecules. Using numerical simulations, we start by constructing colloidal particles made up of 250 mesoscopic particles joined by springs and interacting with each other through short range forces. Afterward we proceed to model several colloidal concentrations and obtain the colloidal particles pair correlation function, from which we derive the potential of mean force. In our second case study, we add linear polymer chains of the same length that attach by one of their ends to the colloids, at a fixed colloidal concentration, and carry out numerical simulations at increasing concentrations of polymer chains, from which we obtain the potential of mean force once again following the same procedure as in the previous case. For the last case study we fixed both the colloids and the polymer chains concentration, while increasing the length of the polymer chains and obtain again the potential of mean force. In all of these simulations, the solvent particles are included explicitly. Using these data we propose a new effective potential of interaction for colloidal dispersion whose parameters can be obtained from mesoscopic scale parameters and carry out standard molecular dynamics simulations with this new potential, thereby providing a route for more fundamentally obtained, coarse grained approaches to model colloidal dispersions.
△ Less
Submitted 3 October, 2015;
originally announced October 2015.
-
Rheological properties of brushes on cancerous epithelial cells under the influence of an external oscillatory force
Authors:
J. D. Hernández Velázquez,
S. Mejía-Rosales,
A. Gama Goicochea
Abstract:
The rheological properties of brushes of different length on the surface of human epithelial cancerous cells are studied here by means of coarse grained numerical simulations, where the surface of the cell is subjected to an external oscillatory force acting on the plane of the cell surface. We model explicitly the tip of an atomic force microscope and the cancerous cell as a surface covered by br…
▽ More
The rheological properties of brushes of different length on the surface of human epithelial cancerous cells are studied here by means of coarse grained numerical simulations, where the surface of the cell is subjected to an external oscillatory force acting on the plane of the cell surface. We model explicitly the tip of an atomic force microscope and the cancerous cell as a surface covered by brushes of different length, and take into account the interactions of the brush chains with the tip and with each other, leading to complex rheological behavior as displayed by the profiles of viscosity and the friction coefficient of this complex system. We comment briefly on how these findings can help in the experimental effort to understand the nature of the cancer growth in human epithelial cells.
△ Less
Submitted 24 September, 2015;
originally announced September 2015.
-
Importance of molecular interactions in colloidal dispersions
Authors:
R. Lopez-Esparza,
M. A. Balderas Altamirano,
E. Pérez,
A. Gama Goicochea
Abstract:
We review briefly the concept of colloidal dispersions, their general properties and some of their most important applications, as well as the basic molecular interactions that give rise to their properties in equilibrium. Similarly, we revisit Brownian motion and hydrodynamic interactions associated with the concept of viscosity of colloidal dispersion. It is argued that the use of modern researc…
▽ More
We review briefly the concept of colloidal dispersions, their general properties and some of their most important applications, as well as the basic molecular interactions that give rise to their properties in equilibrium. Similarly, we revisit Brownian motion and hydrodynamic interactions associated with the concept of viscosity of colloidal dispersion. It is argued that the use of modern research tools, such as computer simulations, allows one to predict accurately some macroscopically measurable properties by solving relatively simple models of molecular interactions for a large number of particles. Lastly, as a case study, we report the prediction of rheological properties of polymer brushes using state of the art, coarse grained computer simulations, which are in excellent agreement with experiments.
△ Less
Submitted 24 September, 2015; v1 submitted 6 August, 2015;
originally announced August 2015.
-
Importance of pore length and geometry in the adsorption/desorption process: a molecular simulation study
Authors:
M. A. Balderas Altamirano,
S. Cordero,
R. López-Esparza,
E. Pérez,
A. Gama Goicochea
Abstract:
Discrete potentials can describe properly the liquid vapor boundary that is necessary to model the adsorption of gas molecules in mesoporous systems with computer simulations. Although there are some works in this subject, the simulations are still highly time - consuming. Here we show that an efficient alternative is to use the three - dimensional Ising model, which allows one to model large syst…
▽ More
Discrete potentials can describe properly the liquid vapor boundary that is necessary to model the adsorption of gas molecules in mesoporous systems with computer simulations. Although there are some works in this subject, the simulations are still highly time - consuming. Here we show that an efficient alternative is to use the three - dimensional Ising model, which allows one to model large systems, with geometries as complex as required that accurately represent the liquid vapor boundary. In particular, we report molecular simulations of cylindrical pores of two different geometry, using a discrete potential. The effect of the length of the pore in the hysteresis loop for a finite pore and infinite one is studied in detail. Lastly, we compare our predictions with experimental results and find excellent agreement between the area of the hysteresis loop predicted for the finite pore and that found in adsorption/desorption experiments.
△ Less
Submitted 5 July, 2015;
originally announced July 2015.
-
On the computational modeling of the viscosity of colloidal dispersions and its relation with basic molecular interactions
Authors:
A. Gama Goicochea,
M. A. Balderas Altamirano,
R. Lopez-Esparza,
M. A. Waldo,
E. Perez
Abstract:
The connection between fundamental interactions acting in molecules in a fluid and macroscopically measured properties, such as the viscosity between colloidal particles coated with polymers, is studied here. The role that hydrodynamic and Brownian forces play in colloidal dispersions is also discussed. It is argued that many body systems in which all these interactions take place can be accuratel…
▽ More
The connection between fundamental interactions acting in molecules in a fluid and macroscopically measured properties, such as the viscosity between colloidal particles coated with polymers, is studied here. The role that hydrodynamic and Brownian forces play in colloidal dispersions is also discussed. It is argued that many body systems in which all these interactions take place can be accurately solved using computational simulation tools. One of those modern tools is the technique known as dissipative particle dynamics, which incorporates Brownian and hydrodynamic forces, as well as basic conservative interactions. A case study is reported, as an example of the applications of this technique, which consists of the prediction of the viscosity and friction between two opposing parallel surfaces covered with polymer chains, under the influence of a steady flow. This work is intended to serve as an introduction to the subject of colloidal dispersions and computer simulations, for last year undergraduate students and beginning graduate students who are interested in beginning research in soft matter systems. To that end, a computational code is included that students can use right away to study complex fluids in equilibrium.
△ Less
Submitted 20 June, 2015;
originally announced June 2015.
-
Adsorption desorption processes on mesoscopic pores conected to microscopic pores of complex geometry using the Ising model
Authors:
M. A. Balderas Altamirano,
S. Cordero,
G. Roman,
A. Gama Goicochea
Abstract:
In this work we report studies of nitrogen adsorption and desorption onto solid surfaces using computer simulations of the three dimensional Ising model, for systems with complex porous structures at the mesoscopic and microscopic levels. A hysteresis cycle between the adsorption and desorption processes appears and we find that its characteristics are dependent on the geometry of the pore and on…
▽ More
In this work we report studies of nitrogen adsorption and desorption onto solid surfaces using computer simulations of the three dimensional Ising model, for systems with complex porous structures at the mesoscopic and microscopic levels. A hysteresis cycle between the adsorption and desorption processes appears and we find that its characteristics are dependent on the geometry of the pore and on the strength of the surface fluid interaction. We obtained also an average adsorption isotherm, which represents a combination of differently shaped pores, and shows robust jumps at certain values of the chemical potential as a consequence of the structures of the pores. Lastly, we compare our results with experimental data and also report the filling process of microscopic pores connected with mesopores. It is argued that these predictions are useful for researchers working on the enhanced recovery of oil and for the design of new nanomaterials, among others.
△ Less
Submitted 15 March, 2015;
originally announced March 2015.
-
Scaling law of the disjoining pressure reveals two dimensional structure of polymeric fluids
Authors:
Armando Gama Goicochea,
Elías Pérez
Abstract:
A scaling relation for the disjoining pressure of strongly confined polymer fluids is proposed for the first time, which yields directly the scaling exponent, nu, of the radius of gyration for polymers. To test the proposed scaling relation we performed extensive particle based, coarse grained computer simulations of polymers confined under theta solvent conditions and found that the value of nu a…
▽ More
A scaling relation for the disjoining pressure of strongly confined polymer fluids is proposed for the first time, which yields directly the scaling exponent, nu, of the radius of gyration for polymers. To test the proposed scaling relation we performed extensive particle based, coarse grained computer simulations of polymers confined under theta solvent conditions and found that the value of nu agrees with the expected value for strictly two dimensional chains, nu = 4/7, which points towards the essential correctness of our scaling relation. New approaches are suggested for experimental tests of this scaling law. This work opens up the way to look for other scaling exponents that may reveal new physical regimes and it constitutes an efficient route to determine nu because the scaling exponent can be obtained with chains of a single polymerization degree by simply reducing the distance between the confining plates.
△ Less
Submitted 9 March, 2015;
originally announced March 2015.
-
The role of the dissipative and random forces in the calculation of the pressure of simple fluids with dissipative particle dynamics
Authors:
A. Gama Goicochea,
M. A. Balderas Altamirano,
J. D. Hernández,
E. Pérez
Abstract:
The role of viscous forces coupled with Brownian forces in momentum conserving computer simulations is studied here in the context of their contribution to the total average pressure of a simple fluid as derived from the virial theorem, in comparison with the contribution of the conservative force to the total pressure. The specific mesoscopic model used is the one known as dissipative particle dy…
▽ More
The role of viscous forces coupled with Brownian forces in momentum conserving computer simulations is studied here in the context of their contribution to the total average pressure of a simple fluid as derived from the virial theorem, in comparison with the contribution of the conservative force to the total pressure. The specific mesoscopic model used is the one known as dissipative particle dynamics, although our conclusions apply to similar models that obey the fluctuation dissipation theorem for short range interactions and have velocity dependent viscous forces. We find that the average contribution of the random and dissipative forces to the pressure is negligible for long simulations, provided these forces are appropriately coupled and when the finite time step used in the integration of the equation of motion is not too small. Finally, we study the properties of the fluid when the random force is made equal to zero and find that the system freezes as a result of the competition of the dissipative and conservative forces.
△ Less
Submitted 6 November, 2014;
originally announced November 2014.
-
Hyperscaling relation between the interfacial tension of liquids and their correlation length near the critical point
Authors:
E. Mayoral,
A. Gama Goicochea
Abstract:
Interfaces involving coexisting phases in condensed matter are essential in various examples of soft matter phenomena such as wetting, nucleation, morphology, phase separation kinetics, membranes, phase coexistence in nanomaterials, etc. Most analytical theories available use concepts derived from mean field theory which does not describe adequately these systems. Satisfactory numerical simulation…
▽ More
Interfaces involving coexisting phases in condensed matter are essential in various examples of soft matter phenomena such as wetting, nucleation, morphology, phase separation kinetics, membranes, phase coexistence in nanomaterials, etc. Most analytical theories available use concepts derived from mean field theory which does not describe adequately these systems. Satisfactory numerical simulations for interfaces at atomistic to mesoscopic scales remains a challenge. In the present work, the interfacial tension between mixtures of organic solvents and water is obtained from mesoscopic computer simulations. The temperature dependence of the interfacial tension is found to obey a scaling law with an average critical exponent mu = 1.23. Additionally, we calculate the evolution of the correlation length, defined as the thickness of the interface between the immiscible fluids, as a function of temperature and find that it obeys also a scaling law with the average critical exponent being nu = 0.67. Lastly, we show that the comparison of mu and nu for these binary mixtures constitutes the first test of Widom hyperscaling relation between these exponents in 3d, expressed as mu = nu (d - 1). Based on these values and those for the 3d Ising model it is argued that both systems belong to the same universality class, which opens up the way for the calculation of new scaling exponents.
△ Less
Submitted 7 October, 2014;
originally announced October 2014.
-
Designing biodegradable surfactants and effective biomolecules with dissipative particle dynamics
Authors:
A. Gama Goicochea
Abstract:
The design of a biodegradable, environmentally friendly surfactant is carried out, taking the structure of a known surfactant that lacks these qualities as the starting point, using mesoscopic computer simulations. The newly designed surfactant is found to perform at least as well as its predecessor, without the latter inimical characteristics. In the second part of this work, a comparative study…
▽ More
The design of a biodegradable, environmentally friendly surfactant is carried out, taking the structure of a known surfactant that lacks these qualities as the starting point, using mesoscopic computer simulations. The newly designed surfactant is found to perform at least as well as its predecessor, without the latter inimical characteristics. In the second part of this work, a comparative study of model proteins with different amino acid sequence interacting with surfaces is undertaken. The results show that, all other aspects being equal, this sequence is the key factor determining the optimal activity of the proteins near surfaces. These conclusions are found to be in agreement with recent experiments from the literature.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Competitive adsorption of surfactants and polymers on colloids by means of mesoscopic simulations
Authors:
A. Gama Goicochea
Abstract:
The study of competitive and cooperative adsorption of functionalized molecules such as polymers, rheology modifiers and surfactant molecules on colloidal particles immersed in a solvent is undertaken using coarse grained, dissipative particle dynamics simulations. The results show that a complex picture emerges from the simulations, one where dispersants and surfactants adsorb cooperatively up to…
▽ More
The study of competitive and cooperative adsorption of functionalized molecules such as polymers, rheology modifiers and surfactant molecules on colloidal particles immersed in a solvent is undertaken using coarse grained, dissipative particle dynamics simulations. The results show that a complex picture emerges from the simulations, one where dispersants and surfactants adsorb cooperatively up to certain concentrations, on colloidal particles, but as the surfactant concentration increases it leads to dispersant desorption. The presence of rheology modifying agents in the colloidal dispersion adds complexity through the association of surfactant micelles to hydrophobic sites of these agents. Analysis of the simulation results reported here point clearly to the self association of the hydrophobic sites along the different polymer molecules as the mechanism responsible for their competitive and cooperative adsorption.
△ Less
Submitted 12 June, 2014;
originally announced June 2014.
-
Folding of the apolipoprotein A1 driven by the salt concentration as a possible mechanism to improve cholesterol trap**
Authors:
M. A. Balderas Altamirano,
A. Gama Goicochea,
E. Pérez
Abstract:
The folding of the cholesterol trap** apolipoprotein A1 in aqueous solution at increasing ionic strength is studied using atomically detailed molecular dynamics simulations. We calculate various structural properties to characterize the conformation of the protein, such as the radius of gyration, the radial distribution function and the end to end distance. Additionally we report information usi…
▽ More
The folding of the cholesterol trap** apolipoprotein A1 in aqueous solution at increasing ionic strength is studied using atomically detailed molecular dynamics simulations. We calculate various structural properties to characterize the conformation of the protein, such as the radius of gyration, the radial distribution function and the end to end distance. Additionally we report information using tools specifically tailored for the characterization of proteins, such as the mean smallest distance matrix and the Ramachandran plot. We find that two qualitatively different configurations of this protein are preferred, one where the protein is extended, and one where it forms loops or closed structures. It is argued that the latter promote the association of the protein with cholesterol and other fatty acids.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
On the potential of mean force of a sterically stabilized dispersion
Authors:
R. Catarino Centeno,
E. Perez,
A. Gama Goicochea
Abstract:
The potential of mean force (PMF) of a colloidal dispersion under various circumstances of current interest, such as varying solvent quality, polymer coating thickness, and addition of electrostatic interaction is obtained from radial distribution functions available from the literature. They are based on an implicit solvent, molecular dynamics simulation study of a model titania dispersion that t…
▽ More
The potential of mean force (PMF) of a colloidal dispersion under various circumstances of current interest, such as varying solvent quality, polymer coating thickness, and addition of electrostatic interaction is obtained from radial distribution functions available from the literature. They are based on an implicit solvent, molecular dynamics simulation study of a model titania dispersion that takes into account three major components to the interaction between colloidal particles, namely van der Waals attraction, repulsion between polymer coating layers, and a hard core particle repulsion. Additionally, a screened form of the electrostatic interaction was included also. It is argued that optimal conditions for dispersion stability can be derived from a comparative analysis of the PMF under the different situations under study. This thermodynamics based analysis is believed to be more accessible to specialists working on the development of improved titania formulations than that based on the more abstract, radial distribution functions.
△ Less
Submitted 27 January, 2014;
originally announced January 2014.
-
Nanotribology of biopolymer brushes in aqueous solution using dissipative particle dynamics simulations: an application to PEG covered liposomes in theta solvent
Authors:
A. Gama Goicochea,
E. Mayoral,
J. Klapp,
C. Pastorino
Abstract:
We undertake the investigation of sheared polymer chains grafted on flat surfaces to model liposomes covered with polyethylene glycol brushes as a case study for the mechanisms of efficient drug delivery in biologically relevant situations, for example, as carriers for topical treatments of illnesses in the human vasculature. For these applications, specific rheological properties are required, su…
▽ More
We undertake the investigation of sheared polymer chains grafted on flat surfaces to model liposomes covered with polyethylene glycol brushes as a case study for the mechanisms of efficient drug delivery in biologically relevant situations, for example, as carriers for topical treatments of illnesses in the human vasculature. For these applications, specific rheological properties are required, such as low viscosity at high shear rate to improve the transport of the liposomes. Therefore non - equilibrium, DPD simulations of polymer brushes of various length and shear rates are performed to obtain the average viscosity and friction coefficient of the system as functions of the shear rate and polymerization degree under theta solvent conditions, and find that the brushes experience shear thinning at large shear rates.The viscosity and the friction coefficient are shown to obey scaling laws at high shear rate in theta solvent, irrespective of the brushes degree of polymerization. These results confirm recent scaling predictions and reproduce very well trends in measurements of the viscosity at high shear of red blood cells in a liposome containing medium.
△ Less
Submitted 17 October, 2013; v1 submitted 14 September, 2013;
originally announced September 2013.
-
Dissipative particle dynamics simulations of weak polyelectrolyte adsorption on charged and neutral surfaces as a function of the degree of ionization
Authors:
F. Alarcón,
E. Pérez,
A. Gama Goicochea
Abstract:
The influence of the chain degree of ionization on the adsorption of weak polyelectrolytes on neutral and on oppositely and likely charged surfaces is investigated for the first time, by means of Monte Carlo simulations with the mesoscopic interaction model known as dissipative particle dynamics. The electrostatic interactions are calculated using the three-dimensional Ewald sum method, with an ap…
▽ More
The influence of the chain degree of ionization on the adsorption of weak polyelectrolytes on neutral and on oppositely and likely charged surfaces is investigated for the first time, by means of Monte Carlo simulations with the mesoscopic interaction model known as dissipative particle dynamics. The electrostatic interactions are calculated using the three-dimensional Ewald sum method, with an appropriate modification for confined systems. Effective wall forces confine the linear polyelectrolytes, and electric charges on the surfaces are included. The solvent is included explicitly also and it is modeled as an athermal solvent for the polyelectrolytes. The number of solvent particles is allowed to fluctuate. The results show that the polyelectrolytes adsorb both onto neutral and charged surfaces, with the adsorption regulated by the chain degree of ionization, being larger at lower ionization degrees, where polyelectrolytes are less charged. Furthermore, polyelectrolyte adsorption is strongly modulated by the counterions screening of surface charge. These findings are supported with predictions of adsorption isotherms with varying ionization degree. We obtain also the surface force mediated by adsorbed polyelectrolytes, which is calculated for the first time as a function of ionization degree. The adsorption and surface force isotherms obtained for weak polyelectrolytes are found to reproduce main trends in experiments, whenever those results are available, and provide additional insight into the role played by the competitive adsorption of the counterions and polyelectrolytes on the surfaces.
△ Less
Submitted 28 September, 2012;
originally announced October 2012.
-
Simulation of Polyelectrolytes in Solution Using Dissipative Particle Dynamics in the Grand Canonical Ensemble: Interaction Strength and Salt Effects
Authors:
F. Alarcon Oseguera,
E. Perez,
A. Gama Goicochea
Abstract:
We have studied a bulk electrolyte, and polyelectrolyte solutions with surfactants or multivalent salt with the explicit presence of counterions and solvent molecules by means of the mesoscopic dissipative particle dynamics (DPD) method in the Grand Canonical ensemble. The electrostatic interactions are calculated using the Ewald sum method and the structure of the fluid is analyzed through the…
▽ More
We have studied a bulk electrolyte, and polyelectrolyte solutions with surfactants or multivalent salt with the explicit presence of counterions and solvent molecules by means of the mesoscopic dissipative particle dynamics (DPD) method in the Grand Canonical ensemble. The electrostatic interactions are calculated using the Ewald sum method and the structure of the fluid is analyzed through the radial distribution function between charged particles. The results are in very good agreement with those reported in the literature using a different method for the calculation of the electrostatic forces, and with those obtained using DPD in the canonical ensemble. We also studied the salt dependent conformation of polyelectrolyte solutions as a function of the solvent quality, and analyzed the electrostatic interaction strength dependence of dilute flexible polyelectrolytes in solution. For the complex systems mentioned above, the electrostatic interactions and the solvent quality play a key role in understanding phenomena that do not occur in noncharged systems.
△ Less
Submitted 19 January, 2010;
originally announced January 2010.
