-
Eliminating the spin-down critical angle in polarizing neutron optics for expanding the polarization bandwidth
Authors:
A. Zubayer,
N. Ghafoor,
A. Glavic,
J. Stahn,
M. Lorentzon,
A. Le Febvrier,
P. Eklund,
J. Birch,
F. Eriksson
Abstract:
Polarized neutron scattering is a very important analysis technique for studies of magnetism, spintronics, and high-sensitivity measurements, among others, offering invaluable information. Yet, the efficiency of such experiments rely on the performance of the polarizing neutron optics to provide high reflectivity and polarization. Presently, state-of-the-art polarizers like Fe/Si supermirrors are…
▽ More
Polarized neutron scattering is a very important analysis technique for studies of magnetism, spintronics, and high-sensitivity measurements, among others, offering invaluable information. Yet, the efficiency of such experiments rely on the performance of the polarizing neutron optics to provide high reflectivity and polarization. Presently, state-of-the-art polarizers like Fe/Si supermirrors are not able to polarize neutrons at low scattering angles in a monochromatic beam or able to polarize neutrons with a variety of wavelengths as for a non-monochromatic beam. To overcome this limitation, it is suggested to use Co/Ti multilayers on Ti substrates owing to their favorable scattering length density characteristics. It is shown that this approach enables a wavelength bandwidth several times larger than achievable with state-of-the-art materials on Si or glass substrates. Consequently, enabling the possibility of polarizing neutrons across an extended wavelength range, including those with very high wavelengths.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Neutron optical tuning of Fe/11B4CTi multilayers for optimal polarization and increased reflectivity for polarizing neutron optics
Authors:
A. Zubayer,
N. Ghafoor,
K. A. Thorarinsdottir,
A. Glavic,
J. Stahn,
G. Nagy,
A. Vorobiev,
F. Magnus,
J. Birch,
F. Eriksson
Abstract:
The concept of scattering length density tuning for improved polarization is investigated for Fe/11B4CTi multilayers and compared to the commonly used Fe/Si system in polarizing multilayer neutron optics. X-ray and neutron reflectivity, magnetization, and neutron polarization have been measured on such multilayers, highlighting differences from conventional Fe/Si multilayers. The multilayer system…
▽ More
The concept of scattering length density tuning for improved polarization is investigated for Fe/11B4CTi multilayers and compared to the commonly used Fe/Si system in polarizing multilayer neutron optics. X-ray and neutron reflectivity, magnetization, and neutron polarization have been measured on such multilayers, highlighting differences from conventional Fe/Si multilayers. The multilayer systems were deposited with 25 Å period thickness, a layer thickness ratio of 0.35 and 20 periods, using ion-assisted DC magnetron sputtering. Replacing Si with 11B4CTi for these multilayers showed an increase in reflectivity due to a reduction in interface width. By tuning the ratio between 11B4C and Ti in the non-magnetic layers, a broad range of scattering length density values was achieved, facilitating scattering length density contrast matching between layers for spin-down neutrons, thereby enhancing polarization. These findings demonstrate the potential of Fe/11B4CTi multilayers as a promising option for polarizing neutron optics and highlight the concept of scattering length density tuning in a large range using 11B4CTi.
△ Less
Submitted 5 April, 2024;
originally announced April 2024.
-
Reflective, polarizing, and magnetically soft amorphous Fe/Si multilayer neutron optics with isotope-enriched 11B4C inducing atomically flat interfaces
Authors:
A. Zubayer,
N. Ghafoor,
K. A. Thórarinsdóttir,
S. Stendahl,
A. Glavic,
J. Stahn,
G. Nagy,
G. Greczynski,
M. Schwartzkopf,
A. Le Febvrier,
P. Eklund,
J. Birch,
F. Magnus,
F. Eriksson
Abstract:
The utilization of polarized neutrons is of great importance in scientific disciplines spanning materials science, physics, biology, and chemistry. Polarization analysis offers insights into otherwise unattainable sample information such as magnetic domains and structures, protein crystallography, composition, orientation, ion-diffusion mechanisms, and relative location of molecules in multicompon…
▽ More
The utilization of polarized neutrons is of great importance in scientific disciplines spanning materials science, physics, biology, and chemistry. Polarization analysis offers insights into otherwise unattainable sample information such as magnetic domains and structures, protein crystallography, composition, orientation, ion-diffusion mechanisms, and relative location of molecules in multicomponent biological systems. State-of-the-art multilayer polarizing neutron optics have limitations, particularly low specular reflectivity and polarization at higher scattering vectors/angles, and the requirement of high external magnetic fields to saturate the polarizer magnetization. Here, we show that by incorporating 11B4C into Fe/Si multilayers, amorphization and smooth interfaces can be achieved, yielding higher neutron reflectivity, less diffuse scattering and higher polarization. Magnetic coercivity is eliminated, and magnetic saturation can be reached at low external fields (>2 mT). This approach offers prospects for significant improvement in polarizing neutron optics, enabling; nonintrusive positioning of the polarizer, enhanced flux, increased data accuracy, and further polarizing/analyzing methods at neutron scattering facilities.
△ Less
Submitted 15 August, 2023;
originally announced August 2023.
-
The Multi-Blade Boron-10-based neutron detector performance using a focusing reflectometer
Authors:
G. Mauri,
I. Apostolidis,
M. J. Christensen,
A. Glavic,
C. C. Lai,
A. Laloni,
F. Messi,
A. Lindh Olsson,
L. Robinson,
J. Stahn,
P. O. Svensson,
R. Hall-Wilton,
F. Piscitelli
Abstract:
The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scale…
▽ More
The Multi-Blade is a Boron-10-based neutron detector designed for neutron reflectometers and developed for the two instruments (Estia and FREIA) planned for the European Spallation Source in Sweden. A reflectometry demonstrator has been installed at the AMOR reflectometer at the Paul Scherrer Institut (PSI - Switzerland). The setup exploits the Selene guide concept and it can be considered a scaled-down demonstrator of Estia. The results of these tests are discussed. It will be shown how the characteristics of the Multi-Blade detector are features that allow the focusing reflectometry operation mode. Additionally the performance of the Multi-Blade, in terms of rate capability, exceeds current state-of-the-art technology. The improvements with respect to the previous prototypes are also highlighted; from background considerations to the linear and angular uniformity response of the detector.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Neutron reflectometry with the Multi-Blade 10B-based detector
Authors:
G. Mauri,
F. Messi,
M. Anastasopoulos,
T. Arnold,
A. Glavic,
C. Höglund,
T. Ilves,
I. Lopez Higuera,
P. Pazmandi,
D. Raspino,
L. Robinson,
S. Schmidt,
P. Svensson,
D. Varga,
R. Hall-Wilton,
F. Piscitelli
Abstract:
The Multi-Blade is a Boron-10-based gaseous detector developed for neutron reflectometry instruments at the European Spallation Source (ESS) in Sweden. The main challenges for neutron reflectometry detectors are the instantaneous counting rate and spatial resolution. The Multi-Blade has been tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. A campaign of scientific measu…
▽ More
The Multi-Blade is a Boron-10-based gaseous detector developed for neutron reflectometry instruments at the European Spallation Source (ESS) in Sweden. The main challenges for neutron reflectometry detectors are the instantaneous counting rate and spatial resolution. The Multi-Blade has been tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. A campaign of scientific measurements has been performed to study the Multi-Blade response in real instrumental conditions. The results of these tests are discussed in this manuscript.
△ Less
Submitted 18 April, 2018; v1 submitted 11 April, 2018;
originally announced April 2018.
-
Characterization of the Multi-Blade 10B-based detector at the CRISP reflectometer at ISIS for neutron reflectometry at ESS
Authors:
F. Piscitelli,
G. Mauri,
F. Messi,
M. Anastasopoulos,
T. Arnold,
A. Glavic,
C. Höglund,
T. Ilves,
I. Lopez Higuera,
P. Pazmandi,
D. Raspino,
L. Robinson,
S. Schmidt,
P. Svensson,
D. Varga,
R. Hall-Wilton
Abstract:
The Multi-Blade is a Boron-10-based gaseous thermal neutron detector developed to face the challenge arising in neutron reflectometry at neutron sources. Neutron reflectometers are challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed according to the requirements given by the reflectometers at the European Spallation Source (ESS) i…
▽ More
The Multi-Blade is a Boron-10-based gaseous thermal neutron detector developed to face the challenge arising in neutron reflectometry at neutron sources. Neutron reflectometers are challenging instruments in terms of instantaneous counting rate and spatial resolution. This detector has been designed according to the requirements given by the reflectometers at the European Spallation Source (ESS) in Sweden. The Multi-Blade has been installed and tested on the CRISP reflectometer at the ISIS neutron and muon source in UK. The results on the detailed detector characterization are discussed in this manuscript.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
Temperature Dependent Magnetism in Artificial Honeycomb Lattice of Connected Elements
Authors:
B. Summers,
L. Debeer-Schmitt,
A. Dahal,
A. Glavic,
P. Kampschroeder,
J. Gunasekera,
D. K. Singh
Abstract:
Artificial magnetic honeycomb lattices are expected to exhibit a broad and tunable range of novel magnetic phenomena that would be difficult to achieve in natural materials, such as long-range spin ice, entropy-driven magnetic charge-ordered state and spin-order due to the spin chirality. Eventually, the spin correlation is expected to develop into a unique spin solid state density ground state, m…
▽ More
Artificial magnetic honeycomb lattices are expected to exhibit a broad and tunable range of novel magnetic phenomena that would be difficult to achieve in natural materials, such as long-range spin ice, entropy-driven magnetic charge-ordered state and spin-order due to the spin chirality. Eventually, the spin correlation is expected to develop into a unique spin solid state density ground state, manifested by the distribution of the pairs of vortex states of opposite chirality. Here we report the creation of a new artificial permalloy honeycomb lattice of ultra-small connecting bonds, with a typical size of $\simeq$ 12 nm. Detail magnetic and neutron scattering measurements on the newly fabricated honeycomb lattice demonstrate the evolution of magnetic correlation as a function of temperature. At low enough temperature, neutron scattering measurements and micromagnetic simulation suggest the development of loop state of vortex configuration in this system.
△ Less
Submitted 19 February, 2018;
originally announced February 2018.
-
Spin Solid versus Magnetic Charge Ordered State in Artificial Honeycomb Lattice of Connected Elements
Authors:
A. Glavic,
B. Summers,
A. Dahal,
R. J. Kline,
W. Van Herck,
A. Sukhov,
A. Ernst,
D. K. Singh
Abstract:
The nature of magnetic correlation at low temperature in two-dimensional artificial magnetic honeycomb lattice is a strongly debated issue. While theoretical researches suggest that the system will develop a novel zero entropy spin solid state as T --> 0 K, a confirmation to this effect in artificial honeycomb lattice of connected elements is lacking. We report on the investigation of magnetic cor…
▽ More
The nature of magnetic correlation at low temperature in two-dimensional artificial magnetic honeycomb lattice is a strongly debated issue. While theoretical researches suggest that the system will develop a novel zero entropy spin solid state as T --> 0 K, a confirmation to this effect in artificial honeycomb lattice of connected elements is lacking. We report on the investigation of magnetic correlation in newly designed artificial permalloy honeycomb lattice of ultra-small elements, with a typical length of ~ 12 nm, using neutron scattering measurements and temperature dependent micromagnetic simulations. Numerical modeling of the polarized neutron reflectometry data elucidates the temperature dependent evolution of spin correlation in this system. As temperature reduces to ~ 7 K, the system tends to develop novel spin solid state, manifested by the alternating distribution of magnetic vortex loops of opposite chiralities. Experimental results are complemented by temperature dependent micromagnetic simulations that confirm the dominance of spin solid state over local magnetic charge ordered state in the artificial honeycomb lattice with connected elements. Our results enable a direct investigation of novel spin solid correlation in the connected honeycomb geometry of two-dimensional artificial structure.
△ Less
Submitted 17 February, 2018;
originally announced February 2018.
-
Unexpected structural and magnetic depth dependence of YIG thin films
Authors:
J. F. K. Cooper,
C. J. Kinane,
S. Langridge,
M. Ali,
B. J. Hickey,
T. Niizeki,
K. Uchida,
E. Saitoh,
H. Ambaye,
A. Glavic
Abstract:
We report measurements on yttrium iron garnet (YIG) thin films grown on both gadolinium gallium garnet (GGG) and yttrium aluminium garnet (YAG) substrates, with and without thin Pt top layers. We provide three principal results: the observation of an interfacial region at the Pt/YIG interface, we place a limit on the induced magnetism of the Pt layer and confirm the existence of an interfacial lay…
▽ More
We report measurements on yttrium iron garnet (YIG) thin films grown on both gadolinium gallium garnet (GGG) and yttrium aluminium garnet (YAG) substrates, with and without thin Pt top layers. We provide three principal results: the observation of an interfacial region at the Pt/YIG interface, we place a limit on the induced magnetism of the Pt layer and confirm the existence of an interfacial layer at the GGG/YIG interface. Polarised neutron reflectometry (PNR) was used to give depth dependence of both the structure and magnetism of these structures. We find that a thin film of YIG on GGG is best described by three distinct layers: an interfacial layer near the GGG, around 5 nm thick and non-magnetic, a magnetic bulk phase, and a non-magnetic and compositionally distinct thin layer near the surface. We theorise that the bottom layer, which is independent of the film thickness, is caused by Gd diffusion. The top layer is likely to be extremely important in inverse spin Hall effect measurements, and is most likely Y2O3 or very similar. Magnetic sensitivity in the PNR to any induced moment in the Pt is increased by the existence of the Y2O3 layer; any moment is found to be less than 0.02 uB/atom.
△ Less
Submitted 25 March, 2017;
originally announced March 2017.
-
Efficient polarization analysis for focusing neutron instruments
Authors:
Jochen Stahn,
Artur Glavic
Abstract:
Polarized neutrons are a powerful probe to investigate magnetism in condensed matter on length scales from single atomic distances to micrometers. With the ongoing advancement of neutron optics, that allow to transport beams with increased divergence, the demands on neutron polarizes and analyzers have grown as well. The situation becomes especially challenging for new instruments at pulsed source…
▽ More
Polarized neutrons are a powerful probe to investigate magnetism in condensed matter on length scales from single atomic distances to micrometers. With the ongoing advancement of neutron optics, that allow to transport beams with increased divergence, the demands on neutron polarizes and analyzers have grown as well. The situation becomes especially challenging for new instruments at pulsed sources, where a large wavelength band needs to be polarized to make efficient use of the time structure of the beam.
Here we present a polarization analysis concept for highly focused neutron beams that is based on transmission supermirrors that are bend in the shape of equiangular spirals. The method allows polarizations above 95\% and good transmission, without negative impact on other beam characteristics. An example of a compact polarizing device already tested on the AMOR reflectometer is presented as well as the concept for the next generation implementation of the technique that will be installed on the Estia instrument being build for the European Spallation Source.
△ Less
Submitted 27 February, 2017;
originally announced February 2017.
-
Synthetic magnetoelectric coupling in a nanocomposite multiferroic
Authors:
P. Jain,
Q. Wang,
M. Roldan,
A. Glavic,
V. Lauter,
C. Urban,
Z. Bi,
T. Ahmed,
J. Zhu,
M. Varela,
Q. Jia,
M. R. Fitzsimmons
Abstract:
Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at roo…
▽ More
Given the paucity of single phase multiferroic materials (with large ferromagnetic moment), composite systems seem an attractive solution in the quest to realize magnetoelectric cou-pling between ferromagnetic and ferroelectric order parameters. Despite having antiferro-magnetic order, BiFeO3 (BFO) has nevertheless been a key material in this quest due to excel-lent ferroelectric properties at room temperature. We studied a superlattice composed of 8 repetitions of 6 unit cells of La0.7Sr0.3MnO3 (LSMO) grown on 5 unit cells of BFO. Significant net uncompensated magnetization in BFO is demonstrated using polarized neutron reflectometry in an insulating superlattice. Remarkably, the magnetization enables magnetic field to change the dielectric properties of the superlattice, which we cite as an example of synthetic magnetoelectric coupling. Importantly, this controlled creation of magnetic moment in BFO suggests a much needed path forward for the design and implementation of integrated oxide devices for next generation magnetoelectric data storage platforms.
△ Less
Submitted 11 September, 2014; v1 submitted 30 July, 2014;
originally announced July 2014.
-
Effects of Strain and Buffer Layer on Interfacial Magnetization in Sr$_2$CrReO$_6$ Films Determined by Polarized Neutron Reflectometry
Authors:
Yaohua Liu,
J. M. Lucy,
A. Glavic,
H. Ambaye,
V. Lauter,
F. Y. Yang,
S. G. E. te Velthuis
Abstract:
We have determined the depth-resolved magnetization structures of a series of highly ordered Sr$_{2}$CrReO$_{6}$ (SCRO) ferrimagnetic epitaxial films via combined studies of x-ray reflectometry, polarized neutron reflectometry and SQUID magnetometry. The SCRO films deposited directly on (LaAlO$_3$)$_{0.3}$(Sr$_2$AlTaO$_6$)$_{0.7}$ or SrTiO$_{3}$ substrates show reduced magnetization of similar wid…
▽ More
We have determined the depth-resolved magnetization structures of a series of highly ordered Sr$_{2}$CrReO$_{6}$ (SCRO) ferrimagnetic epitaxial films via combined studies of x-ray reflectometry, polarized neutron reflectometry and SQUID magnetometry. The SCRO films deposited directly on (LaAlO$_3$)$_{0.3}$(Sr$_2$AlTaO$_6$)$_{0.7}$ or SrTiO$_{3}$ substrates show reduced magnetization of similar width near the interfaces with the substrates, despite having different degrees of strain. When the SCRO film is deposited on a Sr$_{2}$CrNbO$_{6}$ (SCNO) double perovskite buffer layer, the width the interfacial region with reduced magnetization is reduced, agreeing with an improved Cr/Re ordering. However, the relative reduction of the magnetization averaged over the interfacial regions are comparable among the three samples. Interestingly, we found that the magnetization suppression region is wider than the Cr/Re antisite disorder region at the interface between SCRO and SCNO.
△ Less
Submitted 10 September, 2014; v1 submitted 27 June, 2014;
originally announced June 2014.
