-
Embodied Supervision: Haptic Display of Automation Command to Improve Supervisory Performance
Authors:
Alia Gilbert,
Sachit Krishnan,
R. Brent Gillespie
Abstract:
A human operator using a manual control interface has ready access to their own command signal, both by efference copy and proprioception. In contrast, a human supervisor typically relies on visual information alone. We propose supplying a supervisor with a copy of the operators command signal, hypothesizing improved performance, especially when that copy is provided through haptic display. We exp…
▽ More
A human operator using a manual control interface has ready access to their own command signal, both by efference copy and proprioception. In contrast, a human supervisor typically relies on visual information alone. We propose supplying a supervisor with a copy of the operators command signal, hypothesizing improved performance, especially when that copy is provided through haptic display. We experimentally compared haptic with visual access to the command signal, quantifying the performance of N equals 10 participants attempting to determine which of three reference signals was being tracked by an operator. Results indicate an improved accuracy in identifying the tracked target when haptic display was available relative to visual display alone. We conjecture the benefit follows from the relationship of haptics to the supervisor's own experience, perhaps muscle memory, as an operator.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Estimation and Decomposition of Rack Force for Driving on Uneven Roads
Authors:
Akshay Bhardwaj,
Daniel Slavin,
John Walsh,
James Freudenberg,
R. Brent Gillespie
Abstract:
The force transmitted from the front tires to the steering rack of a vehicle, called the rack force, plays an important role in the function of electric power steering (EPS) systems. Estimates of rack force can be used by EPS to attenuate road feedback and reduce driver effort. Further, estimates of the components of rack force (arising, for example, due to steering angle and road profile) can be…
▽ More
The force transmitted from the front tires to the steering rack of a vehicle, called the rack force, plays an important role in the function of electric power steering (EPS) systems. Estimates of rack force can be used by EPS to attenuate road feedback and reduce driver effort. Further, estimates of the components of rack force (arising, for example, due to steering angle and road profile) can be used to separately compensate for each component and thereby enhance steering feel. In this paper, we present three vehicle and tire model-based rack force estimators that utilize sensed steering angle and road profile to estimate total rack force and individual components of rack force. We test and compare the real-time performance of the estimators by performing driving experiments with non-aggressive and aggressive steering maneuvers on roads with low and high frequency profile variations. The results indicate that for aggressive maneuvers the estimators using non-linear tire models produce more accurate rack force estimates. Moreover, only the estimator that incorporates a semi-empirical Rigid Ring tire model is able to capture rack force variation for driving on a road with high frequency profile variation. Finally, we present results from a simulation study to validate the component-wise estimates of rack force.
△ Less
Submitted 12 July, 2020; v1 submitted 29 June, 2020;
originally announced June 2020.
-
Rack Force Estimation for Driving on Uneven Road Surfaces
Authors:
Akshay Bhardwaj,
Daniel Slavin,
John Walsh,
James Freudenberg,
R. Brent Gillespie
Abstract:
The force transmitted from the front tires and tie rods to the steering rack of a vehicle, called the rack force, significantly influences the torque experienced by a driver at the steering wheel. As a result, estimates of rack force are used in a wide variety of advanced driver assist systems. Existing methods for producing rack force estimates are either susceptible to steering system disturbanc…
▽ More
The force transmitted from the front tires and tie rods to the steering rack of a vehicle, called the rack force, significantly influences the torque experienced by a driver at the steering wheel. As a result, estimates of rack force are used in a wide variety of advanced driver assist systems. Existing methods for producing rack force estimates are either susceptible to steering system disturbances or are only applicable for driving on roads with low frequency profile variations such as road slopes. In this paper we present a model that can produce disturbance-free rack force estimates for driving on roads with high frequency profile variations, such as road cleats and potholes, in addition to roads with low frequency profile variations. We validate the estimation accuracy of our model by presenting results from two driving experiments that were performed on test tracks with known low and high frequency road profile variations. We further demonstrate the merits of our model relative to the existing models by comparing the various estimates to rack force measurements obtained using a sensor mounted in the test vehicle.
△ Less
Submitted 12 May, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
Koopman-based Control of a Soft Continuum Manipulator Under Variable Loading Conditions
Authors:
Daniel Bruder,
Xun Fu,
R. Brent Gillespie,
C. David Remy,
Ram Vasudevan
Abstract:
Controlling soft continuum manipulator arms is difficult due to their infinite degrees of freedom, nonlinear material properties, and large deflections under loading. This paper presents a data-driven approach to identifying soft manipulator models that enables consistent control under variable loading conditions. This is achieved by incorporating loads into a linear Koopman operator model as stat…
▽ More
Controlling soft continuum manipulator arms is difficult due to their infinite degrees of freedom, nonlinear material properties, and large deflections under loading. This paper presents a data-driven approach to identifying soft manipulator models that enables consistent control under variable loading conditions. This is achieved by incorporating loads into a linear Koopman operator model as states and estimating their values online via an observer within the control loop. Using this approach, real-time, fully autonomous control of a pneumatically actuated soft continuum manipulator is achieved. In several trajectory following experiments, this controller is shown to be more accurate and precise than controllers based on models that are unable to explicitly account for loading. The manipulator also successfully performs pick and place of objects with unknown mass, demonstrating the efficacy of this approach in executing real-world manipulation tasks.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Comparison and Experimental Validation of Predictive Models for Soft, Fiber-Reinforced Actuators
Authors:
Audrey Sedal,
Alan Wineman,
R Brent Gillespie,
C David Remy
Abstract:
Successful soft robot modeling approaches appearing in recent literature have been based on a variety of distinct theories, including traditional robotic theory, continuum mechanics, and machine learning. Though specific modeling techniques have been developed for and validated against already realized systems, their strengths and weaknesses have not been explicitly compared against each other. In…
▽ More
Successful soft robot modeling approaches appearing in recent literature have been based on a variety of distinct theories, including traditional robotic theory, continuum mechanics, and machine learning. Though specific modeling techniques have been developed for and validated against already realized systems, their strengths and weaknesses have not been explicitly compared against each other. In this paper, we show how three distinct model structures ---a lumped-parameter model, a continuum mechanical model, and a neural network--- compare in capturing the gross trends and specific features of the force generation of soft robotic actuators. In particular, we study models for Fiber Reinforced Elastomeric Enclosures (FREEs), which are a popular choice of soft actuator and that are used in several soft articulated systems, including soft manipulators, exoskeletons, grippers, and locomoting soft robots. We generated benchmark data by testing eight FREE samples that spanned broad design and kinematic spaces and compared the models on their ability to predict the loading-deformation relationships of these samples. This comparison shows the predictive capabilities of each model on individual actuators and each model's generalizability across the design space. While the neural net achieved the highest peak performance, the first principles-based models generalized best across all actuator design parameters tested. The results highlight the essential roles of mathematical structure and experimental parameter determination in building high-performing, generalizable soft actuator models with varying effort invested in system identification.
△ Less
Submitted 31 January, 2019;
originally announced February 2019.