-
CHIME/FRB Detection of Eight New Repeating Fast Radio Burst Sources
Authors:
The CHIME/FRB Collaboration,
:,
B. C. Andersen,
K. Bandura,
M. Bhardwaj,
P. Boubel,
M. M. Boyce,
P. J. Boyle,
C. Brar,
T. Cassanelli,
P. Chawla,
D. Cubranic,
M. Deng,
M. Dobbs,
M. Fandino,
E. Fonseca,
B. M. Gaensler,
A. J. Gilbert,
U. Giri,
D. C. Good,
M. Halpern,
A. S. Hill,
G. Hinshaw,
C. Höfer,
A. Josephy
, et al. (33 additional authors not shown)
Abstract:
We report on the discovery of eight repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Map** Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 103.5 to 1281 pc cm$^{-3}$. They display varying degrees of activity: six sources were detected twice, another three times, and one ten times. These eight repeating FRBs likely represent…
▽ More
We report on the discovery of eight repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Map** Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 103.5 to 1281 pc cm$^{-3}$. They display varying degrees of activity: six sources were detected twice, another three times, and one ten times. These eight repeating FRBs likely represent the bright and/or high-rate end of a distribution of infrequently repeating sources. For all sources, we determine sky coordinates with uncertainties of $\sim$10$^\prime$. FRB 180916.J0158+65 has a burst-averaged DM = $349.2 \pm 0.3$ pc cm$^{-3}$ and a low DM excess over the modelled Galactic maximum (as low as $\sim$20 pc cm$^{-3}$); this source also has a Faraday rotation measure (RM) of $-114.6 \pm 0.6$ rad m$^{-2}$, much lower than the RM measured for FRB 121102. FRB 181030.J1054+73 has the lowest DM for a repeater, $103.5 \pm 0.3$ pc cm$^{-3}$, with a DM excess of $\sim$ 70 pc cm$^{-3}$. Both sources are interesting targets for multi-wavelength follow-up due to their apparent proximity. The DM distribution of our repeater sample is statistically indistinguishable from that of the first 12 CHIME/FRB sources that have not repeated. We find, with 4$σ$ significance, that repeater bursts are generally wider than those of CHIME/FRB bursts that have not repeated, suggesting different emission mechanisms. Our repeater events show complex morphologies that are reminiscent of the first two discovered repeating FRBs. The repetitive behavior of these sources will enable interferometric localizations and subsequent host galaxy identifications.
△ Less
Submitted 21 October, 2019; v1 submitted 9 August, 2019;
originally announced August 2019.
-
Performance of a low-parasitic frequency-domain multiplexing readout
Authors:
A. E. Lowitz,
A. N. Bender,
P. Barry,
T. W. Cecil,
C. L. Chang,
R. Divan,
M. A. Dobbs,
A. J. Gilbert,
S. E. Kuhlmann,
M. Lisovenko,
J. Montgomery,
V. Novosad,
S. Padin,
J. E. Pearson,
G. Wang,
V. Yefremenko,
J. Zhang
Abstract:
Frequency-domain multiplexing is a readout technique for transition edge sensor bolometer arrays used on modern CMB experiments, including the SPT-3G receiver. Here, we present design details and performance measurements for a low-parasitic frequency-domain multiplexing readout. Reducing the parasitic impedance of the connections between cryogenic components provides a path to improving both the c…
▽ More
Frequency-domain multiplexing is a readout technique for transition edge sensor bolometer arrays used on modern CMB experiments, including the SPT-3G receiver. Here, we present design details and performance measurements for a low-parasitic frequency-domain multiplexing readout. Reducing the parasitic impedance of the connections between cryogenic components provides a path to improving both the crosstalk and noise performance of the readout. Reduced crosstalk will in turn allow higher multiplexing factors. We have demonstrated a factor of two improvement in parasitic resistance compared to SPT-3G hardware. Reduced parasitics also permits operation of lower-resistance bolometers, which enables better optimization of R$_{\rm{bolo}}$ for improved readout noise performance. The prototype system exhibits noise performance comparable to SPT-3G readout hardware when operating SPT-3G detectors.
△ Less
Submitted 21 July, 2019;
originally announced July 2019.
-
A Second Source of Repeating Fast Radio Bursts
Authors:
The CHIME/FRB Collaboration,
:,
M. Amiri,
K. Bandura,
M. Bhardwaj,
P. Boubel,
M. M. Boyce,
P. J. Boyle,
C. Brar,
M. Burhanpurkar,
T. Cassanelli,
P. Chawla,
J. F. Cliche,
D. Cubranic,
M. Deng,
N. Denman,
M. Dobbs,
M. Fandino,
E. Fonseca,
B. M. Gaensler,
A. J. Gilbert,
A. Gill,
U. Giri,
D. C. Good,
M. Halpern
, et al. (36 additional authors not shown)
Abstract:
The discovery of a repeating Fast Radio Burst (FRB) source, FRB 121102, eliminated models involving cataclysmic events for this source. No other repeating FRB has yet been detected in spite of many recent FRB discoveries and follow-ups, suggesting repeaters may be rare in the FRB population. Here we report the detection of six repeat bursts from FRB 180814.J0422+73, one of the 13 FRBs detected by…
▽ More
The discovery of a repeating Fast Radio Burst (FRB) source, FRB 121102, eliminated models involving cataclysmic events for this source. No other repeating FRB has yet been detected in spite of many recent FRB discoveries and follow-ups, suggesting repeaters may be rare in the FRB population. Here we report the detection of six repeat bursts from FRB 180814.J0422+73, one of the 13 FRBs detected by the Canadian Hydrogen Intensity Map** Experiment (CHIME) FRB project during its pre-commissioning phase in July and August 2018. These repeat bursts are consistent with originating from a single position on the sky, with the same dispersion measure (DM), ~189 pc cm-3. This DM is approximately twice the expected Milky Way column density, and implies an upper limit on the source redshift of 0.1, at least a factor of ~2 closer than FRB 121102. In some of the repeat bursts, we observe sub-pulse frequency structure, drifting, and spectral variation reminiscent of that seen in FRB 121102, suggesting similar emission mechanisms and/or propagation effects. This second repeater, found among the first few CHIME/FRB discoveries, suggests that there exists -- and that CHIME/FRB and other wide-field, sensitive radio telescopes will find -- a substantial population of repeating FRBs.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
Observations of Fast Radio Bursts at Frequencies down to 400 Megahertz
Authors:
CHIME/FRB Collaboration,
:,
Mandana Amiri,
Kevin Bandura,
Mohit Bhardwaj,
Paula Boubel,
Michelle M. Boyce,
Patrick J. Boyle,
Charanjot Brar,
Maya Burhanpurkar,
Pragya Chawla,
Jean F. Cliche,
Davor Cubranic,
Meiling Deng,
Nolan Denman,
Matthew Dobbs,
M. Fandino,
Emmanuel Fonseca,
Bryan M. Gaensler,
Adam J. Gilbert,
Utkarsh Giri,
Deborah C. Good,
Mark Halpern,
David Hanna,
Alexander S. Hill
, et al. (31 additional authors not shown)
Abstract:
Fast radio bursts (FRBs) are highly dispersed millisecond-duration radio flashes likely arriving from far outside the Milky Way galaxy. This phenomenon was discovered at radio frequencies near 1.4 GHz and to date has been observed in one case at as high as 8 GHz, but not below 700 MHz in spite of significant searches at low frequencies. Here we report detections of FRBs at radio frequencies as low…
▽ More
Fast radio bursts (FRBs) are highly dispersed millisecond-duration radio flashes likely arriving from far outside the Milky Way galaxy. This phenomenon was discovered at radio frequencies near 1.4 GHz and to date has been observed in one case at as high as 8 GHz, but not below 700 MHz in spite of significant searches at low frequencies. Here we report detections of FRBs at radio frequencies as low as 400 MHz, on the Canadian Hydrogen Intensity Map** Experiment (CHIME) using the CHIME/FRB instrument. We present 13 FRBs detected during a telescope pre-commissioning phase, when our sensitivity and field-of-view were not yet at design specifications. Emission in multiple events is seen down to 400 MHz, the lowest radio frequency to which we are sensitive. The FRBs show a variety of temporal scattering behaviours, with the majority significantly scattered, and some apparently unscattered to within measurement uncertainty even at our lowest frequencies. Of the 13 reported here, one event has the lowest dispersion measure yet reported, implying it is among the closest yet known, and another has shown multiple repeat bursts, as described in a companion paper. Our low-scattering events suggest that efforts to detect FRBs at radio frequencies below 400 MHz will eventually be successful. The overall scattering properties of our sample suggest that FRBs as a class are preferentially located in environments that scatter radio waves more strongly than the diffuse interstellar medium (ISM) in the Milky Way.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
Digital frequency multiplexing with sub-Kelvin SQUIDs
Authors:
Amy E. Lowitz,
Amy N. Bender,
Matthew A. Dobbs,
Adam J. Gilbert
Abstract:
Digital frequency multiplexing (dfMux) is a readout architecture for transition edge sensor-based detector arrays and is used on telescopes including SPT-3G, POLARBEAR-2, and LiteBIRD. Here, we present recent progress and plans for development of a sub-Kelvin SQUID architecture for digital frequency multiplexed bolometers. This scheme moves the SQUID from the 4 K stage to the 250 mK stage, adjacen…
▽ More
Digital frequency multiplexing (dfMux) is a readout architecture for transition edge sensor-based detector arrays and is used on telescopes including SPT-3G, POLARBEAR-2, and LiteBIRD. Here, we present recent progress and plans for development of a sub-Kelvin SQUID architecture for digital frequency multiplexed bolometers. This scheme moves the SQUID from the 4 K stage to the 250 mK stage, adjacent to the bolometers. Operating the SQUID on the detector stage may offer lower noise and greater scalability. Electrical performance will be improved as a result of decreased wiring length and reduced parasitics, allowing for higher multiplexing factors and lower bolometer R_normal . These performance improvements will enable ultra-large focal planes for future instruments such as CMB-S4.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
The CHIME Fast Radio Burst Project: System Overview
Authors:
The CHIME/FRB Collaboration,
:,
M. Amiri,
K. Bandura,
P. Berger,
M. Bhardwaj,
M. M. Boyce,
P. J. Boyle,
C. Brar,
M. Burhanpurkar,
P. Chawla,
J. Chowdhury,
J. F. Cliche,
M. D. Cranmer,
D. Cubranic,
M. Deng,
N. Denman,
M. Dobbs,
M. Fandino,
E. Fonseca,
B. M. Gaensler,
U. Giri,
A. J. Gilbert,
D. C. Good,
S. Guliani
, et al. (28 additional authors not shown)
Abstract:
The Canadian Hydrogen Intensity Map** Experiment (CHIME) is a novel transit radio telescope operating across the 400-800-MHz band. CHIME is comprised of four 20-m x 100-m semi-cylindrical paraboloid reflectors, each of which has 256 dual-polarization feeds suspended along its axis, giving it a >200 square degree field-of-view. This, combined with wide bandwidth, high sensitivity, and a powerful…
▽ More
The Canadian Hydrogen Intensity Map** Experiment (CHIME) is a novel transit radio telescope operating across the 400-800-MHz band. CHIME is comprised of four 20-m x 100-m semi-cylindrical paraboloid reflectors, each of which has 256 dual-polarization feeds suspended along its axis, giving it a >200 square degree field-of-view. This, combined with wide bandwidth, high sensitivity, and a powerful correlator makes CHIME an excellent instrument for the detection of Fast Radio Bursts (FRBs). The CHIME Fast Radio Burst Project (CHIME/FRB) will search beam-formed, high time-and frequency-resolution data in real time for FRBs in the CHIME field-of-view. Here we describe the CHIME/FRB backend, including the real-time FRB search and detection software pipeline as well as the planned offline analyses. We estimate a CHIME/FRB detection rate of 2-42 FRBs/sky/day normalizing to the rate estimated at 1.4-GHz by Vander Wiel et al. (2016). Likely science outcomes of CHIME/FRB are also discussed. CHIME/FRB is currently operational in a commissioning phase, with science operations expected to commence in the latter half of 2018.
△ Less
Submitted 29 March, 2018;
originally announced March 2018.
-
Limits on the ultra-bright Fast Radio Burst population from the CHIME Pathfinder
Authors:
CHIME Scientific Collaboration,
Mandana Amiri,
Kevin Bandura,
Philippe Berger,
J. Richard Bond,
Jean-François Cliche,
Liam Connor,
Meiling Deng,
Nolan Denman,
Matt Dobbs,
Rachel Simone Domagalski,
Mateus Fandino,
Adam J Gilbert,
Deborah C. Good,
Mark Halpern,
David Hanna,
Adam D. Hincks,
Gary Hinshaw,
Carolin Höfer,
Gilbert Hsyu,
Peter Klages,
T. L. Landecker,
Kiyoshi Masui,
Juan Mena-Parra,
Laura Newburgh
, et al. (13 additional authors not shown)
Abstract:
We present results from a new incoherent-beam Fast Radio Burst (FRB) search on the Canadian Hydrogen Intensity Map** Experiment (CHIME) Pathfinder. Its large instantaneous field of view (FoV) and relative thermal insensitivity allow us to probe the ultra-bright tail of the FRB distribution, and to test a recent claim that this distribution's slope,…
▽ More
We present results from a new incoherent-beam Fast Radio Burst (FRB) search on the Canadian Hydrogen Intensity Map** Experiment (CHIME) Pathfinder. Its large instantaneous field of view (FoV) and relative thermal insensitivity allow us to probe the ultra-bright tail of the FRB distribution, and to test a recent claim that this distribution's slope, $α\equiv-\frac{\partial \log N}{\partial \log S}$, is quite small. A 256-input incoherent beamformer was deployed on the CHIME Pathfinder for this purpose. If the FRB distribution were described by a single power-law with $α=0.7$, we would expect an FRB detection every few days, making this the fastest survey on sky at present. We collected 1268 hours of data, amounting to one of the largest exposures of any FRB survey, with over 2.4\,$\times$\,10$^5$\,deg$^2$\,hrs. Having seen no bursts, we have constrained the rate of extremely bright events to $<\!13$\,sky$^{-1}$\,day$^{-1}$ above $\sim$\,220$\sqrt{(τ/\rm ms)}$ Jy\,ms for $τ$ between 1.3 and 100\,ms, at 400--800\,MHz. The non-detection also allows us to rule out $α\lesssim0.9$ with 95$\%$ confidence, after marginalizing over uncertainties in the GBT rate at 700--900\,MHz, though we show that for a cosmological population and a large dynamic range in flux density, $α$ is brightness-dependent. Since FRBs now extend to large enough distances that non-Euclidean effects are significant, there is still expected to be a dearth of faint events and relative excess of bright events. Nevertheless we have constrained the allowed number of ultra-intense FRBs. While this does not have significant implications for deeper, large-FoV surveys like full CHIME and APERTIF, it does have important consequences for other wide-field, small dish experiments.
△ Less
Submitted 20 April, 2017; v1 submitted 26 February, 2017;
originally announced February 2017.
-
ICE: a scalable, low-cost FPGA-based telescope signal processing and networking system
Authors:
K. Bandura,
A. N. Bender,
J. F. Cliche,
T. de Haan,
M. A. Dobbs,
A. J. Gilbert,
S. Griffin,
G. Hsyu,
D. Ittah,
J. Mena Parra,
J. Montgomery,
T. Pinsonneault-Marotte,
S. Siegel,
G. Smecher,
Q. Y. Tang,
K. Vanderlinde,
N. Whitehorn
Abstract:
We present an overview of the 'ICE' hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control…
▽ More
We present an overview of the 'ICE' hardware and software framework that implements large arrays of interconnected FPGA-based data acquisition, signal processing and networking nodes economically. The system was conceived for application to radio, millimeter and sub-millimeter telescope readout systems that have requirements beyond typical off-the-shelf processing systems, such as careful control of interference signals produced by the digital electronics, and clocking of all elements in the system from a single precise observatory-derived oscillator. A new generation of telescopes operating at these frequency bands and designed with a vastly increased emphasis on digital signal processing to support their detector multiplexing technology or high-bandwidth correlators---data rates exceeding a terabyte per second---are becoming common. The ICE system is built around a custom FPGA motherboard that makes use of an Xilinx Kintex-7 FPGA and ARM-based co-processor. The system is specialized for specific applications through software, firmware, and custom mezzanine daughter boards that interface to the FPGA through the industry-standard FMC specifications. For high density applications, the motherboards are packaged in 16-slot crates with ICE backplanes that implement a low-cost passive full-mesh network between the motherboards in a crate, allow high bandwidth interconnection between crates, and enable data offload to a computer cluster. A Python-based control software library automatically detects and operates the hardware in the array. Examples of specific telescope applications of the ICE framework are presented, namely the frequency-multiplexed bolometer readout systems used for the SPT and Simons Array and the digitizer, F-engine, and networking engine for the CHIME and HIRAX radio interferometers.
△ Less
Submitted 22 August, 2016;
originally announced August 2016.
-
POLARBEAR-2: an instrument for CMB polarization measurements
Authors:
Y. Inoue,
P. Ade,
Y. Akiba,
C. Aleman,
K. Arnold,
C. Baccigalupi,
B. Barch,
D. Barron,
A. Bender,
D. Boettger,
J. Borrill,
S. Chapman,
Y. Chinone,
A. Cukierman,
T. de Haan,
M. A. Dobbs,
A. Ducout,
R. Dunner,
T. Elleflot,
J. Errard,
G. Fabbian,
S. Feeney,
C. Feng,
G. Fuller,
A. J. Gilbert
, et al. (61 additional authors not shown)
Abstract:
POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision σ(r) < 0.01, and the sum of neu…
▽ More
POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision σ(r) < 0.01, and the sum of neutrino masses, Σmν, with σ(Σmν) < 90 meV. To achieve these goals, PB-2 will employ 7588 transition-edge sensor bolometers at 95 GHz and 150 GHz, which will be operated at the base temperature of 250 mK. Science observations will begin in 2017.
△ Less
Submitted 9 August, 2016;
originally announced August 2016.
-
Holographic Beam Map** of the CHIME Pathfinder Array
Authors:
Philippe Berger,
Laura B. Newburgh,
Mandana Amiri,
Kevin Bandura,
Jean-Francois Cliche,
Liam Connor,
Meiling Deng,
Nolan Denman,
Matt Dobbs,
Mateus Fandino,
Adam J. Gilbert,
Deborah Good,
Mark Halpern,
David Hanna,
Adam D. Hincks,
Gary Hinshaw,
Carolin Hofer,
Andre M. Johnson,
Tom L. Landecker,
Kiyoshi W. Masui,
Juan Mena Parra,
Niels Oppermann,
Ue-Li Pen,
Jeffrey B. Peterson,
Andre Recnik
, et al. (10 additional authors not shown)
Abstract:
The Canadian Hydrogen Intensity Map** Experiment (CHIME) Pathfinder radio telescope is currently surveying the northern hemisphere between 400 and 800 MHz. By map** the large scale structure of neutral hydrogen through its redshifted 21 cm line emission between $z \sim 0.8-2.5$ CHIME will contribute to our understanding of Dark Energy. Bright astrophysical foregrounds must be separated from th…
▽ More
The Canadian Hydrogen Intensity Map** Experiment (CHIME) Pathfinder radio telescope is currently surveying the northern hemisphere between 400 and 800 MHz. By map** the large scale structure of neutral hydrogen through its redshifted 21 cm line emission between $z \sim 0.8-2.5$ CHIME will contribute to our understanding of Dark Energy. Bright astrophysical foregrounds must be separated from the neutral hydrogen signal, a task which requires precise characterization of the polarized telescope beams. Using the DRAO John A. Galt 26 m telescope, we have developed a holography instrument and technique for map** the CHIME Pathfinder beams. We report the status of the instrument and initial results of this effort.
△ Less
Submitted 5 July, 2016;
originally announced July 2016.
-
Digital frequency domain multiplexing readout electronics for the next generation of millimeter telescopes
Authors:
Amy N. Bender,
Jean-François Cliche,
Tijmen de Haan,
Matt A. Dobbs,
Adam J. Gilbert,
Joshua Montgomery,
Neil Rowlands,
Graeme M. Smecher,
Ken Smith,
Andrew Wilson
Abstract:
Frequency domain multiplexing (fMux) is an established technique for the readout of transition-edge sensor (TES) bolometers in millimeter-wavelength astrophysical instrumentation. In fMux, the signals from multiple detectors are read out on a single pair of wires reducing the total cryogenic thermal loading as well as the cold component complexity and cost of a system. The current digital fMux sys…
▽ More
Frequency domain multiplexing (fMux) is an established technique for the readout of transition-edge sensor (TES) bolometers in millimeter-wavelength astrophysical instrumentation. In fMux, the signals from multiple detectors are read out on a single pair of wires reducing the total cryogenic thermal loading as well as the cold component complexity and cost of a system. The current digital fMux system, in use by POLARBEAR, EBEX, and the South Pole Telescope, is limited to a multiplexing factor of 16 by the dynamic range of the Superconducting Quantum Interference Device pre-amplifier and the total system bandwidth. Increased multiplexing is key for the next generation of large format TES cameras, such as SPT-3G and POLARBEAR2, which plan to have on the of order 15,000 detectors.
Here, we present the next generation fMux readout, focusing on the warm electronics. In this system, the multiplexing factor increases to 64 channels per module (2 wires) while maintaining low noise levels and detector stability. This is achieved by increasing the system bandwidth, reducing the dynamic range requirements though active feedback, and digital synthesis of voltage biases with a novel polyphase filter algorithm. In addition, a version of the new fMux readout includes features such as low power consumption and radiation-hard components making it viable for future space-based millimeter telescopes such as the LiteBIRD satellite.
△ Less
Submitted 11 July, 2014;
originally announced July 2014.
-
City versus wetland: Predicting urban growth in the Vecht area with a cellular automaton model
Authors:
Melek Tendurus,
Atilim Gunes Baydin,
Marieke A. Eleveld,
Alison J. Gilbert
Abstract:
There are many studies dealing with the protection or restoration of wetlands and the sustainable economic growth of cities as separate subjects. This study investigates the conflict between the two in an area where city growth is threatening a protected wetland area. We develop a stochastic cellular automaton model for urban growth and apply it to the Vecht area surrounding the city of Hilversum…
▽ More
There are many studies dealing with the protection or restoration of wetlands and the sustainable economic growth of cities as separate subjects. This study investigates the conflict between the two in an area where city growth is threatening a protected wetland area. We develop a stochastic cellular automaton model for urban growth and apply it to the Vecht area surrounding the city of Hilversum in the Netherlands, using topographic maps covering the past 150 years. We investigate the dependence of the urban growth pattern on the values associated with the protected wetland and other types of landscape surrounding the city. The conflict between city growth and wetland protection is projected to occur before 2035, assuming full protection of the wetland. Our results also show that a milder protection policy, allowing some of the wetland to be sacrificed, could be beneficial for maintaining other valuable landscapes. This insight would be difficult to achieve by other analytical means. We conclude that even slight changes in usage priorities of landscapes can significantly affect the landscape distribution in near future. Our results also point to the importance of a protection policy to take the value of surrounding landscapes and the dynamic nature of urban areas into account.
△ Less
Submitted 4 April, 2013;
originally announced April 2013.
