Showing 101–150 of 270 results for author: Gilbert, A

Searching for Anisotropic Cosmic Birefringence with Polarization Data from SPTpol

Authors: F. Bianchini, W. L. K. Wu, P. A. R. Ade, A. J. Anderson, J. E. Austermann, J. S. Avva, L. Balkenhol, E. Baxter, J. A. Beall, A. N. Bender, B. A. Benson, L. E. Bleem, J. E. Carlstrom, C. L. Chang, P. Chaubal, H. C. Chiang, T. L. Chou, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, J. Gallicchio , et al. (47 additional authors not shown)

Abstract: We present a search for anisotropic cosmic birefringence in 500 deg$^2$ of southern sky observed at 150 GHz with the SPTpol camera on the South Pole Telescope. We reconstruct a map of cosmic polarization rotation anisotropies using higher-order correlations between the observed cosmic microwave background (CMB) $E$ and $B$ fields. We then measure the angular power spectrum of this map, which is fo… ▽ More We present a search for anisotropic cosmic birefringence in 500 deg$^2$ of southern sky observed at 150 GHz with the SPTpol camera on the South Pole Telescope. We reconstruct a map of cosmic polarization rotation anisotropies using higher-order correlations between the observed cosmic microwave background (CMB) $E$ and $B$ fields. We then measure the angular power spectrum of this map, which is found to be consistent with zero. The non-detection is translated into an upper limit on the amplitude of the scale-invariant cosmic rotation power spectrum, $L(L+1)C_L^{αα}/2π< 0.10 \times 10^{-4}$ rad$^2$ (0.033 deg$^2$, 95% C.L.). This upper limit can be used to place constraints on the strength of primordial magnetic fields, $B_{1 \rm Mpc} < 17 {\rm nG} $ (95% C.L.), and on the coupling constant of the Chern-Simons electromagnetic term $g_{aγ} < 4.0 \times 10^{-2}/H_I $ (95% C.L.), where $H_I$ is the inflationary Hubble scale. For the first time, we also cross-correlate the CMB temperature fluctuations with the reconstructed rotation angle map, a signal expected to be non-vanishing in certain theoretical scenarios, and find no detectable signal. We perform a suite of systematics and consistency checks and find no evidence for contamination. △ Less

Submitted 4 October, 2020; v1 submitted 14 June, 2020; originally announced June 2020.

Comments: 17 pages, 7 figures - new subsection on non-Gaussian foregrounds, conclusions unchanged - updated to match published version on PRD

Journal ref: Phys. Rev. D 102, 083504 (2020)

The ELFIN Mission

Authors: V. Angelopoulos, E. Tsai, L. Bingley, C. Shaffer, D. L. Turner, A. Runov, W. Li, J. Liu, A. V. Artemyev, X. -J. Zhang, R. J. Strangeway, R. E. Wirz, Y. Y. Shprits, V. A. Sergeev, R. P. Caron, M. Chung, P. Cruce, W. Greer, E. Grimes, K. Hector, M. J. Lawson, D. Leneman, E. V. Masongsong, C. L. Russell, C. Wilkins , et al. (57 additional authors not shown)

Abstract: The Electron Loss and Fields Investigation with a Spatio-Temporal Ambiguity-Resolving option (ELFIN-STAR, or simply: ELFIN) mission comprises two identical 3-Unit (3U) CubeSats on a polar (~93deg inclination), nearly circular, low-Earth (~450 km altitude) orbit. Launched on September 15, 2018, ELFIN is expected to have a >2.5 year lifetime. Its primary science objective is to resolve the mechanism… ▽ More The Electron Loss and Fields Investigation with a Spatio-Temporal Ambiguity-Resolving option (ELFIN-STAR, or simply: ELFIN) mission comprises two identical 3-Unit (3U) CubeSats on a polar (~93deg inclination), nearly circular, low-Earth (~450 km altitude) orbit. Launched on September 15, 2018, ELFIN is expected to have a >2.5 year lifetime. Its primary science objective is to resolve the mechanism of storm-time relativistic electron precipitation, for which electromagnetic ion cyclotron (EMIC) waves are a prime candidate. From its ionospheric vantage point, ELFIN uses its unique pitch-angle-resolving capability to determine whether measured relativistic electron pitch-angle and energy spectra within the loss cone bear the characteristic signatures of scattering by EMIC waves or whether such scattering may be due to other processes. Pairing identical ELFIN satellites with slowly-variable along-track separation allows disambiguation of spatial and temporal evolution of the precipitation over minutes-to-tens-of-minutes timescales, faster than the orbit period of a single low-altitude satellite (~90min). Each satellite carries an energetic particle detector for electrons (EPDE) that measures 50keV to 5MeV electrons with deltaE/E<40% and a fluxgate magnetometer (FGM) on a ~72cm boom that measures magnetic field waves (e.g., EMIC waves) in the range from DC to 5Hz Nyquist (nominally) with <0.3nT/sqrt(Hz) noise at 1Hz. The spinning satellites (T_spin~3s) are equipped with magnetorquers that permit spin-up/down and reorientation maneuvers. The spin axis is placed normal to the orbit plane, allowing full pitch-angle resolution twice per spin. An energetic particle detector for ions (EPDI) measures 250keV-5MeV ions, addressing secondary science. Funded initially by CalSpace and the University Nanosat Program, ELFIN was selected for flight with joint support from NSF and NASA between 2014 and 2018. △ Less

Submitted 16 June, 2020; v1 submitted 13 June, 2020; originally announced June 2020.

Comments: Submitted to Space Science Reviews April 2020. 51 pages, 7 tables, 21 figures

An Unusual Transmission Spectrum for the Sub-Saturn KELT-11b Suggestive of a Sub-Solar Water Abundance

Authors: Knicole D. Colón, Laura Kreidberg, Luis Welbanks, Michael R. Line, Nikku Madhusudhan, Thomas Beatty, Patrick Tamburo, Kevin B. Stevenson, Avi Mandell, Joseph E. Rodriguez, Thomas Barclay, Eric D. Lopez, Keivan G. Stassun, Daniel Angerhausen, Jonathan J. Fortney, David J. James, Joshua Pepper, John P. Ahlers, Peter Plavchan, Supachai Awiphan, Cliff Kotnik, Kim K. McLeod, Gabriel Murawski, Heena Chotani, Danny LeBrun , et al. (8 additional authors not shown)

Abstract: We present an optical-to-infrared transmission spectrum of the inflated sub-Saturn KELT-11b measured with the Transiting Exoplanet Survey Satellite (TESS), the Hubble Space Telescope (HST) Wide Field Camera 3 G141 spectroscopic grism, and the Spitzer Space Telescope (Spitzer) at 3.6 $μ$m, in addition to a Spitzer 4.5 $μ$m secondary eclipse. The precise HST transmission spectrum notably reveals a l… ▽ More We present an optical-to-infrared transmission spectrum of the inflated sub-Saturn KELT-11b measured with the Transiting Exoplanet Survey Satellite (TESS), the Hubble Space Telescope (HST) Wide Field Camera 3 G141 spectroscopic grism, and the Spitzer Space Telescope (Spitzer) at 3.6 $μ$m, in addition to a Spitzer 4.5 $μ$m secondary eclipse. The precise HST transmission spectrum notably reveals a low-amplitude water feature with an unusual shape. Based on free retrieval analyses with varying molecular abundances, we find strong evidence for water absorption. Depending on model assumptions, we also find tentative evidence for other absorbers (HCN, TiO, and AlO). The retrieved water abundance is generally $\lesssim 0.1\times$ solar (0.001--0.7$\times$ solar over a range of model assumptions), several orders of magnitude lower than expected from planet formation models based on the solar system metallicity trend. We also consider chemical equilibrium and self-consistent 1D radiative-convective equilibrium model fits and find they too prefer low metallicities ($[M/H] \lesssim -2$, consistent with the free retrieval results). However, all the retrievals should be interpreted with some caution since they either require additional absorbers that are far out of chemical equilibrium to explain the shape of the spectrum or are simply poor fits to the data. Finally, we find the Spitzer secondary eclipse is indicative of full heat redistribution from KELT-11b's dayside to nightside, assuming a clear dayside. These potentially unusual results for KELT-11b's composition are suggestive of new challenges on the horizon for atmosphere and formation models in the face of increasingly precise measurements of exoplanet spectra. △ Less

Submitted 20 October, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Comments: Accepted to The Astronomical Journal. 31 pages, 20 figures, 7 tables

Project and Forget: Solving Large-Scale Metric Constrained Problems

Authors: Rishi Sonthalia, Anna C. Gilbert

Abstract: Given a set of dissimilarity measurements amongst data points, determining what metric representation is most "consistent" with the input measurements or the metric that best captures the relevant geometric features of the data is a key step in many machine learning algorithms. Existing methods are restricted to specific kinds of metrics or small problem sizes because of the large number of metric… ▽ More Given a set of dissimilarity measurements amongst data points, determining what metric representation is most "consistent" with the input measurements or the metric that best captures the relevant geometric features of the data is a key step in many machine learning algorithms. Existing methods are restricted to specific kinds of metrics or small problem sizes because of the large number of metric constraints in such problems. In this paper, we provide an active set algorithm, Project and Forget, that uses Bregman projections, to solve metric constrained problems with many (possibly exponentially) inequality constraints. We provide a theoretical analysis of \textsc{Project and Forget} and prove that our algorithm converges to the global optimal solution and that the $L_2$ distance of the current iterate to the optimal solution decays asymptotically at an exponential rate. We demonstrate that using our method we can solve large problem instances of three types of metric constrained problems: general weight correlation clustering, metric nearness, and metric learning; in each case, out-performing the state of the art methods with respect to CPU times and problem sizes. △ Less

Submitted 26 September, 2022; v1 submitted 8 May, 2020; originally announced May 2020.

Tree! I am no Tree! I am a Low Dimensional Hyperbolic Embedding

Authors: Rishi Sonthalia, Anna C. Gilbert

Abstract: Given data, finding a faithful low-dimensional hyperbolic embedding of the data is a key method by which we can extract hierarchical information or learn representative geometric features of the data. In this paper, we explore a new method for learning hyperbolic representations by taking a metric-first approach. Rather than determining the low-dimensional hyperbolic embedding directly, we learn a… ▽ More Given data, finding a faithful low-dimensional hyperbolic embedding of the data is a key method by which we can extract hierarchical information or learn representative geometric features of the data. In this paper, we explore a new method for learning hyperbolic representations by taking a metric-first approach. Rather than determining the low-dimensional hyperbolic embedding directly, we learn a tree structure on the data. This tree structure can then be used directly to extract hierarchical information, embedded into a hyperbolic manifold using Sarkar's construction \cite{sarkar}, or used as a tree approximation of the original metric. To this end, we present a novel fast algorithm \textsc{TreeRep} such that, given a $δ$-hyperbolic metric (for any $δ\geq 0$), the algorithm learns a tree structure that approximates the original metric. In the case when $δ= 0$, we show analytically that \textsc{TreeRep} exactly recovers the original tree structure. We show empirically that \textsc{TreeRep} is not only many orders of magnitude faster than previously known algorithms, but also produces metrics with lower average distortion and higher mean average precision than most previous algorithms for learning hyperbolic embeddings, extracting hierarchical information, and approximating metrics via tree metrics. △ Less

Submitted 22 October, 2020; v1 submitted 8 May, 2020; originally announced May 2020.

Comments: Code available at https://github.com/rsonthal/TreeRep

Correlation-driven eightfold magnetic anisotropy in a two-dimensional oxide monolayer

Authors: Zhangzhang Cui, Alexander J. Grutter, Hua Zhou, Hui Cao, Yongqi Dong, Dustin A. Gilbert, **gyuan Wang, Yi-Sheng Liu, Jiaji Ma, Zhenpeng Hu, **ghua Guo, **g Xia, Brian J. Kirby, Padraic Shafer, Elke Arenholz, Hanghui Chen, Xiaofang Zhai, Yalin Lu

Abstract: Engineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180 degrees spin switching between states. We demonstrate a novel eightfold anisotropy in magnetic SrRuO3 monolayers by inducing a spin reorientation in (SrRuO3)1/(S… ▽ More Engineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180 degrees spin switching between states. We demonstrate a novel eightfold anisotropy in magnetic SrRuO3 monolayers by inducing a spin reorientation in (SrRuO3)1/(SrTiO3)N superlattices, in which the magnetic easy axis of Ru spins is transformed from uniaxial <001> direction (N = 1 and 2) to eightfold <111> directions (N = 3, 4 and 5). This eightfold anisotropy enables 71 and 109 degrees spin switching in SrRuO3 monolayers, analogous to 71 and 109 degrees polarization switching in ferroelectric BiFeO3. First-principle calculations reveal that increasing the SrTiO3 layer thickness induces an emergent correlation-driven orbital ordering, tuning spin-orbit interactions and reorienting the SrRuO3 monolayer easy axis. Our work demonstrates that correlation effects can be exploited to substantially change spin-orbit interactions, stabilizing unprecedented properties in two-dimensional magnets and opening rich opportunities for low-power, multi-state device applications. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Comments: 15+13 pages, 5+10 figures, including supplementary materials

Journal ref: Sci. Adv. 6, eaay0114 (2020)

TOI-1338: TESS' First Transiting Circumbinary Planet

Authors: Veselin B. Kostov, Jerome A. Orosz, Adina D. Feinstein, William F. Welsh, Wolf Cukier, Nader Haghighipour, Billy Quarles, David V. Martin, Benjamin T. Montet, Guillermo Torres, Amaury H. M. J. Triaud, Thomas Barclay, Patricia Boyd, Cesar Briceno, Andrew Collier Cameron, Alexandre C. M. Correia, Emily A. Gilbert, Samuel Gill, Michael Gillon, Jacob Haqq-Misra, Coel Hellier, Courtney Dressing, Daniel C. Fabrycky, Gabor Furesz, Jon Jenkins , et al. (43 additional authors not shown)

Abstract: We report the detection of the first circumbinary planet found by TESS. The target, a known eclipsing binary, was observed in sectors 1 through 12 at 30-minute cadence and in sectors 4 through 12 at two-minute cadence. It consists of two stars with masses of 1.1 MSun and 0.3 MSun on a slightly eccentric (0.16), 14.6-day orbit, producing prominent primary eclipses and shallow secondary eclipses. Th… ▽ More We report the detection of the first circumbinary planet found by TESS. The target, a known eclipsing binary, was observed in sectors 1 through 12 at 30-minute cadence and in sectors 4 through 12 at two-minute cadence. It consists of two stars with masses of 1.1 MSun and 0.3 MSun on a slightly eccentric (0.16), 14.6-day orbit, producing prominent primary eclipses and shallow secondary eclipses. The planet has a radius of ~6.9 REarth and was observed to make three transits across the primary star of roughly equal depths (~0.2%) but different durations -- a common signature of transiting circumbinary planets. Its orbit is nearly circular (e ~ 0.09) with an orbital period of 95.2 days. The orbital planes of the binary and the planet are aligned to within ~1 degree. To obtain a complete solution for the system, we combined the TESS photometry with existing ground-based radial-velocity observations in a numerical photometric-dynamical model. The system demonstrates the discovery potential of TESS for circumbinary planets, and provides further understanding of the formation and evolution of planets orbiting close binary stars. △ Less

Submitted 16 April, 2020; originally announced April 2020.

Comments: 35 pages, 21 figures, 6 tables

Les Houches 2019 Physics at TeV Colliders: New Physics Working Group Report

Authors: G. Brooijmans, A. Buckley, S. Caron, A. Falkowski, B. Fuks, A. Gilbert, W. J. Murray, M. Nardecchia, J. M. No, R. Torre, T. You, G. Zevi Della Porta, G. Alguero, J. Y. Araz, S. Banerjee, G. Bélanger, T. Berger-Hryn'ova, J. Bernigaud, A. Bharucha, D. Buttazzo, J. M. Butterworth, G. Cacciapaglia, A. Coccaro, L. Corpe, N. Desai , et al. (65 additional authors not shown)

Abstract: This report presents the activities of the `New Physics' working group for the `Physics at TeV Colliders' workshop (Les Houches, France, 10--28 June, 2019). These activities include studies of direct searches for new physics, approaches to exploit published data to constrain new physics, as well as the development of tools to further facilitate these investigations. Benefits of machine learning fo… ▽ More This report presents the activities of the `New Physics' working group for the `Physics at TeV Colliders' workshop (Les Houches, France, 10--28 June, 2019). These activities include studies of direct searches for new physics, approaches to exploit published data to constrain new physics, as well as the development of tools to further facilitate these investigations. Benefits of machine learning for both the search for new physics and the interpretation of these searches are also presented. △ Less

Submitted 27 February, 2020; originally announced February 2020.

Comments: Proceedings of the BSM Session of the Les Houches 2019 workshop, 227 pages

Effect of chemical substitution on the skyrmion phase in Cu$_2$OSeO$_3$

Authors: Paul M. Neves, Dustin A. Gilbert, Sheng Ran, I-Lin Liu, Shanta Saha, John Collini, Markus Bleuel, Johnpierre Paglione, Julie A. Borchers, Nicholas P. Butch

Abstract: Magnetic skyrmions have been the focus of intense research due to their unique qualities which result from their topological protections. Previous work on Cu$_2$OSeO$_3$, the only known insulating multiferroic skyrmion material, has shown that chemical substitution alters the skyrmion phase. We chemically substitute Zn, Ag, and S into powdered Cu$_2$OSeO$_3$ to study the effect on the magnetic pha… ▽ More Magnetic skyrmions have been the focus of intense research due to their unique qualities which result from their topological protections. Previous work on Cu$_2$OSeO$_3$, the only known insulating multiferroic skyrmion material, has shown that chemical substitution alters the skyrmion phase. We chemically substitute Zn, Ag, and S into powdered Cu$_2$OSeO$_3$ to study the effect on the magnetic phase diagram. In both the Ag and the S substitutions, we find that the skyrmion phase is stabilized over a larger temperature range, as determined via magnetometry and small-angle neutron scattering (SANS). Meanwhile, while previous magnetometry characterization suggests two high temperature skyrmion phases in the Zn-substituted sample, SANS reveals the high temperature phase to be skyrmionic while we are unable to distinguish the other from helical order. Overall, chemical substitution weakens helical and skyrmion order as inferred from neutron scattering of the $|$q$| \approx$ 0.01 $Å^{-1}$ magnetic peak. △ Less

Submitted 26 February, 2020; originally announced February 2020.

Comments: 12 pages, 11 figures, submitted to Physical Review B

Journal ref: Phys. Rev. B 102, 134410 (2020)

An Improved Measurement of the Secondary Cosmic Microwave Background Anisotropies from the SPT-SZ + SPTpol Surveys

Authors: C. L. Reichardt, S. Patil, P. A. R. Ade, A. J. Anderson, J. E. Austermann, J. S. Avva, E. Baxter, J. A. Beall, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, J. E. Carlstrom, C. L. Chang, P. Chaubal, H. C. Chiang, T. L. Chou, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, J. Gallicchio , et al. (52 additional authors not shown)

Abstract: We report new measurements of millimeter-wave power spectra in the angular multipole range $2000 \le \ell \le 11,000$ (angular scales $5^\prime \gtrsim θ\gtrsim 1^\prime$). By adding 95 and 150\,GHz data from the low-noise 500 deg$^2$ SPTpol survey to the SPT-SZ three-frequency 2540 deg$^2$ survey, we substantially reduce the uncertainties in these bands. These power spectra include contributions… ▽ More We report new measurements of millimeter-wave power spectra in the angular multipole range $2000 \le \ell \le 11,000$ (angular scales $5^\prime \gtrsim θ\gtrsim 1^\prime$). By adding 95 and 150\,GHz data from the low-noise 500 deg$^2$ SPTpol survey to the SPT-SZ three-frequency 2540 deg$^2$ survey, we substantially reduce the uncertainties in these bands. These power spectra include contributions from the primary cosmic microwave background, cosmic infrared background, radio galaxies, and thermal and kinematic Sunyaev-Zel'dovich (SZ) effects. The data favor a thermal SZ (tSZ) power at 143\,GHz of $D^{\rm tSZ}_{3000} = 3.42 \pm 0.54~ μ{\rm K}^2$ and a kinematic SZ (kSZ) power of $D^{\rm kSZ}_{3000} = 3.0 \pm 1.0~ μ{\rm K}^2$. This is the first measurement of kSZ power at $\ge 3\,σ$. We study the implications of the measured kSZ power for the epoch of reionization, finding the duration of reionization to be $Δz_{re} = 1.0^{+1.6}_{-0.7}$ ($Δz_{re}< 4.1$ at 95% confidence), when combined with our previously published tSZ bispectrum measurement. △ Less

Submitted 18 February, 2020; v1 submitted 13 February, 2020; originally announced February 2020.

Comments: Submitted to ApJ, 16 pages. (revised portions of the introduction and description of bandpower estimation)

Neural Architecture Search for Deep Image Prior

Authors: Kary Ho, Andrew Gilbert, Hailin **, John Collomosse

Abstract: We present a neural architecture search (NAS) technique to enhance the performance of unsupervised image de-noising, in-painting and super-resolution under the recently proposed Deep Image Prior (DIP). We show that evolutionary search can automatically optimize the encoder-decoder (E-D) structure and meta-parameters of the DIP network, which serves as a content-specific prior to regularize these s… ▽ More We present a neural architecture search (NAS) technique to enhance the performance of unsupervised image de-noising, in-painting and super-resolution under the recently proposed Deep Image Prior (DIP). We show that evolutionary search can automatically optimize the encoder-decoder (E-D) structure and meta-parameters of the DIP network, which serves as a content-specific prior to regularize these single image restoration tasks. Our binary representation encodes the design space for an asymmetric E-D network that typically converges to yield a content-specific DIP within 10-20 generations using a population size of 500. The optimized architectures consistently improve upon the visual quality of classical DIP for a diverse range of photographic and artistic content. △ Less

Submitted 14 January, 2020; originally announced January 2020.

The First Habitable Zone Earth-sized Planet from TESS. III: Climate States and Characterization Prospects for TOI-700 d

Authors: Gabrielle Suissa, Eric T. Wolf, Ravi kumar Kopparapu, Geronimo L. Villanueva, Thomas Fauchez, Avi M. Mandell, Giada Arney, Emily A. Gilbert, Joshua E. Schlieder, Thomas Barclay, Elisa V. Quintana, Eric Lopez, Joseph E. Rodriguez, Andrew Vanderburg

Abstract: We present self-consistent three-dimensional climate simulations of possible habitable states for the newly discovered Habitable Zone Earth-sized planet, TOI-700 d. We explore a variety of atmospheric compositions, pressures, and rotation states for both ocean-covered and completely desiccated planets in order to assess the planet's potential for habitability. For all 20 of our simulated cases, we… ▽ More We present self-consistent three-dimensional climate simulations of possible habitable states for the newly discovered Habitable Zone Earth-sized planet, TOI-700 d. We explore a variety of atmospheric compositions, pressures, and rotation states for both ocean-covered and completely desiccated planets in order to assess the planet's potential for habitability. For all 20 of our simulated cases, we use our climate model outputs to synthesize transmission spectra, combined-light spectra, and integrated broadband phase curves. These climatologically-informed observables will help the community assess the technological capabilities necessary for future characterization of this planet - as well as similar transiting planets discovered in the future - and will provide a guide for distinguishing possible climate states if one day we do obtain sensitive spectral observations of a habitable planet around a M-star. We find that TOI-700 d is a strong candidate for a habitable world and can potentially maintain temperate surface conditions under a wide variety of atmospheric compositions. Unfortunately, the spectral feature depths from the resulting transmission spectra and the peak flux and variations from our synthesized phase curves for TOI-700 d do not exceed 10 ppm. This will likely prohibit the James Webb Space Telescope (JWST) from characterizing its atmosphere; however, this motivates the community to invest in future instrumentation that perhaps can one day reveal the true nature of TOI-700 d, and to continue to search for similar planets around less distant stars. △ Less

Submitted 29 June, 2020; v1 submitted 3 January, 2020; originally announced January 2020.

Comments: Accepted to the Astronomical Journal. 21 pages, 11 figures

The First Habitable Zone Earth-sized Planet from TESS. I: Validation of the TOI-700 System

Authors: Emily A. Gilbert, Thomas Barclay, Joshua E. Schlieder, Elisa V. Quintana, Benjamin J. Hord, Veselin B. Kostov, Eric D. Lopez, Jason F. Rowe, Kelsey Hoffman, Lucianne M. Walkowicz, Michele L. Silverstein, Joseph E. Rodriguez, Andrew Vanderburg, Gabrielle Suissa, Vladimir S. Airapetian, Matthew S. Clement, Sean N. Raymond, Andrew W. Mann, Ethan Kruse, Jack J. Lissauer, Knicole D. Colón, Ravi kumar Kopparapu, Laura Kreidberg, Sebastian Zieba, Karen A. Collins , et al. (70 additional authors not shown)

Abstract: We present the discovery and validation of a three-planet system orbiting the nearby (31.1 pc) M2 dwarf star TOI-700 (TIC 150428135). TOI-700 lies in the TESS continuous viewing zone in the Southern Ecliptic Hemisphere; observations spanning 11 sectors reveal three planets with radii ranging from 1 R$_\oplus$ to 2.6 R$_\oplus$ and orbital periods ranging from 9.98 to 37.43 days. Ground-based follo… ▽ More We present the discovery and validation of a three-planet system orbiting the nearby (31.1 pc) M2 dwarf star TOI-700 (TIC 150428135). TOI-700 lies in the TESS continuous viewing zone in the Southern Ecliptic Hemisphere; observations spanning 11 sectors reveal three planets with radii ranging from 1 R$_\oplus$ to 2.6 R$_\oplus$ and orbital periods ranging from 9.98 to 37.43 days. Ground-based follow-up combined with diagnostic vetting and validation tests enable us to rule out common astrophysical false-positive scenarios and validate the system of planets. The outermost planet, TOI-700 d, has a radius of $1.19\pm0.11$ R$_\oplus$ and resides in the conservative habitable zone of its host star, where it receives a flux from its star that is approximately 86% of the Earth's insolation. In contrast to some other low-mass stars that host Earth-sized planets in their habitable zones, TOI-700 exhibits low levels of stellar activity, presenting a valuable opportunity to study potentially-rocky planets over a wide range of conditions affecting atmospheric escape. While atmospheric characterization of TOI-700 d with the James Webb Space Telescope (JWST) will be challenging, the larger sub-Neptune, TOI-700 c (R = 2.63 R$_\oplus$), will be an excellent target for JWST and beyond. TESS is scheduled to return to the Southern Hemisphere and observe TOI-700 for an additional 11 sectors in its extended mission, which should provide further constraints on the known planet parameters and searches for additional planets and transit timing variations in the system. △ Less

Submitted 10 July, 2020; v1 submitted 3 January, 2020; originally announced January 2020.

Comments: Accepted for publication in AJ (30 pages, 13 figures, 4 tables, 2 appendices)

Interfacial-Redox-Induced Tuning of Superconductivity in YBa$_{2}$Cu$_{3}$O$_{7-δ}$

Authors: Peyton D. Murray, Dustin A. Gilbert, Alexander J. Grutter, Brian J. Kirby, David Hernandez-Maldonado, Maria Varela, Zachary E. Brubaker, W. L. N. C. Liyanage, Rajesh V. Chopdekar, Valentin Taufour, Rena J. Zieve, Jason R. Jeffries, Elke Arenholz, Yayoi Takamura, Julie A. Borchers, Kai Liu

Abstract: Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd cap** layer of u… ▽ More Solid state ionic approaches for modifying ion distributions in getter/oxide heterostructures offer exciting potentials to control material properties. Here we report a simple, scalable approach allowing for total control of the superconducting transition in optimally doped YBa$_{2}$Cu$_{3}$O$_{7-δ}$ (YBCO) films via a chemically-driven ionic migration mechanism. Using a thin Gd cap** layer of up to 20 nm deposited onto 100 nm thick epitaxial YBCO films, oxygen is found to leach from deep within the YBCO. Progressive reduction of the superconducting transition is observed, with complete suppression possible for a sufficiently thick Gd layer. These effects arise from the combined impact of redox-driven electron do** and modification of the YBCO microstructure due to oxygen migration and depletion. This work demonstrates an effective ionic control of superconductivity in oxides, an interface induced effect that goes well into the quasi-bulk regime, opening up possibilities for electric field manipulation. △ Less

Submitted 17 November, 2019; originally announced November 2019.

Comments: 26 pages, 5 figures

Journal ref: ACS Applied Materials & Interfaces, 12, 4741-4748 (2020)

A geometric look at momentum flux and stress in fluid mechanics

Authors: Andrew D. Gilbert, Jacques Vanneste

Abstract: We develop a geometric formulation of fluid dynamics, valid on arbitrary Riemannian manifolds, that regards the momentum-flux and stress tensors as 1-form valued 2-forms, and their divergence as a covariant exterior derivative. We review the necessary tools of differential geometry and obtain the corresponding coordinate-free form of the equations of motion for a variety of inviscid fluid models -… ▽ More We develop a geometric formulation of fluid dynamics, valid on arbitrary Riemannian manifolds, that regards the momentum-flux and stress tensors as 1-form valued 2-forms, and their divergence as a covariant exterior derivative. We review the necessary tools of differential geometry and obtain the corresponding coordinate-free form of the equations of motion for a variety of inviscid fluid models -- compressible and incompressible Euler equations, Lagrangian-averaged Euler-$α$ equations, magnetohydrodynamics and shallow-water models -- using a variational derivation which automatically yields a symmetric momentum flux. We also consider dissipative effects and discuss the geometric form of the Navier--Stokes equations for viscous fluids and of the Oldroyd-B model for visco-elastic fluids. △ Less

Submitted 13 June, 2022; v1 submitted 15 November, 2019; originally announced November 2019.

A geometric look at MHD and the Braginsky dynamo

Authors: Andrew D. Gilbert, Jacques Vanneste

Abstract: This paper considers magnetohydrodynamics (MHD) and some of its applications from the perspective of differential geometry, considering the dynamics of an ideal fluid flow and magnetic field on a general three-dimensional manifold, equipped with a metric and an induced volume form. The benefit of this level of abstraction is that it clarifies basic aspects of fluid dynamics such as how certain qua… ▽ More This paper considers magnetohydrodynamics (MHD) and some of its applications from the perspective of differential geometry, considering the dynamics of an ideal fluid flow and magnetic field on a general three-dimensional manifold, equipped with a metric and an induced volume form. The benefit of this level of abstraction is that it clarifies basic aspects of fluid dynamics such as how certain quantities are transported, how they transform under the action of map**s (for example the flow map between Lagrangian labels and Eulerian positions), how conservation laws arise, and the origin of certain approximations that preserve the mathematical structure of classical mechanics. First, the governing equations for ideal MHD are derived in a general setting by means of an action principle, and making use of Lie derivatives. The way in which these equations transform under a pull back, by the map taking the position of a fluid parcel to a background location, is detailed. This is then used to parameterise Alfvén waves using concepts of pseudomomentum and pseudofield, in parallel with the development of Generalised Lagrangian Mean theory in hydrodynamics. Finally non-ideal MHD is considered with a sketch of the development of the Braginsky $αω$-dynamo in a general setting. Expressions for the $α$-tensor are obtained, including a novel geometric formulation in terms of connection coefficients, and related to formulae found elsewhere in the literature. △ Less

Submitted 19 October, 2020; v1 submitted 15 November, 2019; originally announced November 2019.

A filamentary cascade model of the inertial range

Authors: Stephen Childress, Andrew G. Gilbert

Abstract: This paper develops a simple model of the inertial range of turbulent flow, based on a cascade of vortical filaments. A binary branching structure is proposed, involving the splitting of filaments at each step into pairs of daughter filaments with differing properties, in effect two distinct simultaneous cascades. Neither of these cascades has the Richardson-Kolmogorov exponent of 1/3. This bimoda… ▽ More This paper develops a simple model of the inertial range of turbulent flow, based on a cascade of vortical filaments. A binary branching structure is proposed, involving the splitting of filaments at each step into pairs of daughter filaments with differing properties, in effect two distinct simultaneous cascades. Neither of these cascades has the Richardson-Kolmogorov exponent of 1/3. This bimodal structure is also different from bifractal models as vorticity volume is conserved. If cascades are assumed to be initiated continuously and throughout space we obtain a model of the inertial range of stationary turbulence. We impose the constraint associated with Kolmogorov's four-fifths law and then adjust the splitting to achieve good agreement with the observed structure exponents $ζ_p$. The presence of two elements to the cascade is responsible for the nonlinear dependence of $ζ_p$ upon $p$. A single cascade provides a model for the initial-value problem of the Navier--Stokes equations in the limit of vanishing viscosity. To simulate this limit we let the cascade continue indefinitely, energy removal occurring in the limit. We are thus able to compute the decay of energy in the model. △ Less

Submitted 13 November, 2019; v1 submitted 8 November, 2019; originally announced November 2019.

Comments: 35 pages, 14 figures

Automated Left Ventricle Dimension Measurement in 2D Cardiac Ultrasound via an Anatomically Meaningful CNN Approach

Authors: Andrew Gilbert, Marit Holden, Line Eikvil, Svein Arne Aase, Eigil Samset, Kristin McLeod

Abstract: Two-dimensional echocardiography (2DE) measurements of left ventricle (LV) dimensions are highly significant markers of several cardiovascular diseases. These measurements are often used in clinical care despite suffering from large variability between observers. This variability is due to the challenging nature of accurately finding the correct temporal and spatial location of measurement endpoin… ▽ More Two-dimensional echocardiography (2DE) measurements of left ventricle (LV) dimensions are highly significant markers of several cardiovascular diseases. These measurements are often used in clinical care despite suffering from large variability between observers. This variability is due to the challenging nature of accurately finding the correct temporal and spatial location of measurement endpoints in ultrasound images. These images often contain fuzzy boundaries and varying reflection patterns between frames. In this work, we present a convolutional neural network (CNN) based approach to automate 2DE LV measurements. Treating the problem as a landmark detection problem, we propose a modified U-Net CNN architecture to generate heatmaps of likely coordinate locations. To improve the network performance we use anatomically meaningful heatmaps as labels and train with a multi-component loss function. Our network achieves 13.4%, 6%, and 10.8% mean percent error on intraventricular septum (IVS), LV internal dimension (LVID), and LV posterior wall (LVPW) measurements respectively. The design outperforms other networks and matches or approaches intra-analyser expert error. △ Less

Submitted 6 November, 2019; originally announced November 2019.

Comments: Best paper award at Smart Ultrasound Imaging Workshop (SUSI) MICCAI 2019

Journal ref: Smart Ultrasound Imaging and Perinatal, Preterm and Paediatric Image Analysis, LNCS 11978, pp. 29-37, Springer, 2019

Doppler Spectrum Classification with CNNs via Heatmap Location Encoding and a Multi-head Output Layer

Authors: Andrew Gilbert, Marit Holden, Line Eikvil, Mariia Rakhmail, Aleksandar Babic, Svein Arne Aase, Eigil Samset, Kristin McLeod

Abstract: Spectral Doppler measurements are an important part of the standard echocardiographic examination. These measurements give important insight into myocardial motion and blood flow providing clinicians with parameters for diagnostic decision making. Many of these measurements can currently be performed automatically with high accuracy, increasing the efficiency of the diagnostic pipeline. However, f… ▽ More Spectral Doppler measurements are an important part of the standard echocardiographic examination. These measurements give important insight into myocardial motion and blood flow providing clinicians with parameters for diagnostic decision making. Many of these measurements can currently be performed automatically with high accuracy, increasing the efficiency of the diagnostic pipeline. However, full automation is not yet available because the user must manually select which measurement should be performed on each image. In this work we develop a convolutional neural network (CNN) to automatically classify cardiac Doppler spectra into measurement classes. We show how the multi-modal information in each spectral Doppler recording can be combined using a meta parameter post-processing map** scheme and heatmaps to encode coordinate locations. Additionally, we experiment with several state-of-the-art network architectures to examine the tradeoff between accuracy and memory usage for resource-constrained environments. Finally, we propose a confidence metric using the values in the last fully connected layer of the network. We analyze example images that fall outside of our proposed classes to show our confidence metric can prevent many misclassifications. Our algorithm achieves 96% accuracy on a test set drawn from a separate clinical site, indicating that the proposed method is suitable for clinical adoption and enabling a fully automatic pipeline from acquisition to Doppler spectrum measurements. △ Less

Submitted 8 November, 2019; v1 submitted 6 November, 2019; originally announced November 2019.

Comments: copyright 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Constraints on Cosmological Parameters from the 500 deg$^2$ SPTpol Lensing Power Spectrum

Authors: F. Bianchini, W. L. K. Wu, P. A. R. Ade, A. J. Anderson, J. E. Austermann, J. S. Avva, J. A. Beall, A. N. Bender, B. A. Benson, L. E. Bleem, J. E. Carlstrom, C. L. Chang, P. Chaubal, H. C. Chiang, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, J. Gallicchio, E. M. George, A. Gilbert, N. Gupta , et al. (46 additional authors not shown)

Abstract: We present cosmological constraints based on the cosmic microwave background (CMB) lensing potential power spectrum measurement from the recent 500 deg$^2$ SPTpol survey, the most precise CMB lensing measurement from the ground to date. We fit a flat $Λ$CDM model to the reconstructed lensing power spectrum alone and in addition with other data sets: baryon acoustic oscillations (BAO) as well as pr… ▽ More We present cosmological constraints based on the cosmic microwave background (CMB) lensing potential power spectrum measurement from the recent 500 deg$^2$ SPTpol survey, the most precise CMB lensing measurement from the ground to date. We fit a flat $Λ$CDM model to the reconstructed lensing power spectrum alone and in addition with other data sets: baryon acoustic oscillations (BAO) as well as primary CMB spectra from Planck and SPTpol. The cosmological constraints based on SPTpol and Planck lensing band powers are in good agreement when analysed alone and in combination with Planck full-sky primary CMB data. With weak priors on the baryon density and other parameters, the CMB lensing data alone provide a 4\% constraint on $σ_8Ω_m^{0.25} = 0.0593 \pm 0.025$.. Jointly fitting with BAO data, we find $σ_8=0.779 \pm 0.023$, $Ω_m = 0.368^{+0.032}_{-0.037}$, and $H_0 = 72.0^{+2.1}_{-2.5}\,\text{km}\,\text{s}^{-1}\,\text{Mpc}^{-1} $, up to $2\,σ$ away from the central values preferred by Planck lensing + BAO. However, we recover good agreement between SPTpol and Planck when restricting the analysis to similar scales. We also consider single-parameter extensions to the flat $Λ$CDM model. The SPTpol lensing spectrum constrains the spatial curvature to be $Ω_K = -0.0007 \pm 0.0025$ and the sum of the neutrino masses to be $\sum m_ν < 0.23$ eV at 95\% C.L. (with Planck primary CMB and BAO data), in good agreement with the Planck lensing results. With the differences in the $S/N$ of the lensing modes and the angular scales covered in the lensing spectra, this analysis represents an important independent check on the full-sky Planck lensing measurement. △ Less

Submitted 4 February, 2020; v1 submitted 15 October, 2019; originally announced October 2019.

Comments: 16 pages, 8 figures, 3 tables, updated to match the version published on ApJ

Measurements of B-mode Polarization of the Cosmic Microwave Background from 500 Square Degrees of SPTpol Data

Authors: J. T. Sayre, C. L. Reichardt, J. W. Henning, P. A. R. Ade, A. J. Anderson, J. E. Austermann, J. S. Avva, J. A. Beall, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, J. E. Carlstrom, C. L. Chang, H. C. Chiang, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, J. Gallicchio, E. M. George, A. Gilbert , et al. (40 additional authors not shown)

Abstract: We report a B-mode power spectrum measurement from the cosmic microwave background (CMB) polarization anisotropy observations made using the SPTpol instrument on the South Pole Telescope. This work uses 500 deg$^2$ of SPTpol data, a five-fold increase over the last SPTpol B-mode release. As a result, the bandpower uncertainties have been reduced by more than a factor of two, and the measurement ex… ▽ More We report a B-mode power spectrum measurement from the cosmic microwave background (CMB) polarization anisotropy observations made using the SPTpol instrument on the South Pole Telescope. This work uses 500 deg$^2$ of SPTpol data, a five-fold increase over the last SPTpol B-mode release. As a result, the bandpower uncertainties have been reduced by more than a factor of two, and the measurement extends to lower multipoles: $52 < \ell < 2301$. Data from both 95 and 150 GHz are used, allowing for three cross-spectra: 95 GHz x 95 GHz, 95 GHz x 150 GHz, and 150 GHz x 150 GHz. B-mode power is detected at very high significance; we find $P(BB < 0) = 5.8 \times 10^{-71}$, corresponding to a $18.1 σ$ detection of power. An upper limit is set on the tensor-to-scalar ratio, $r < 0.44$ at 95% confidence (the expected $1 σ$ constraint on $r$ given the measurement uncertainties is 0.22). We find the measured B-mode power is consistent with the Planck best-fit $Λ$CDM model predictions. Scaling the predicted lensing B-mode power in this model by a factor Alens, the data prefer Alens = $1.17 \pm 0.13$. These data are currently the most precise measurements of B-mode power at $\ell > 320$. △ Less

Submitted 22 April, 2020; v1 submitted 13 October, 2019; originally announced October 2019.

Comments: 16 pages, 4 figures, Submitted to PRD

Journal ref: Phys. Rev. D 101, 122003 (2020)

The SPTpol Extended Cluster Survey

Authors: L. E. Bleem, S. Bocquet, B. Stalder, M. D. Gladders, P. A. R. Ade, S. W. Allen, A. J. Anderson, J. Annis, M. L. N. Ashby, J. E. Austermann, S. Avila, J. S. Avva, M. Bayliss, J. A. Beall, K. Bechtol, A. N. Bender, B. A. Benson, E. Bertin, F. Bianchini, C. Blake, M. Brodwin, D. Brooks, E. Buckley-Geer, D. L. Burke, J. E. Carlstrom , et al. (113 additional authors not shown)

Abstract: We describe the observations and resultant galaxy cluster catalog from the 2770 deg$^2$ SPTpol Extended Cluster Survey (SPT-ECS). Clusters are identified via the Sunyaev-Zel'dovich (SZ) effect, and confirmed with a combination of archival and targeted follow-up data, making particular use of data from the Dark Energy Survey (DES). With incomplete followup we have confirmed as clusters 244 of 266 c… ▽ More We describe the observations and resultant galaxy cluster catalog from the 2770 deg$^2$ SPTpol Extended Cluster Survey (SPT-ECS). Clusters are identified via the Sunyaev-Zel'dovich (SZ) effect, and confirmed with a combination of archival and targeted follow-up data, making particular use of data from the Dark Energy Survey (DES). With incomplete followup we have confirmed as clusters 244 of 266 candidates at a detection significance $ξ\ge 5$ and an additional 204 systems at $4<ξ<5$. The confirmed sample has a median mass of $M_{500c} \sim {4.4 \times 10^{14} M_\odot h_{70}^{-1}}$, a median redshift of $z=0.49$, and we have identified 44 strong gravitational lenses in the sample thus far. Radio data are used to characterize contamination to the SZ signal; the median contamination for confirmed clusters is predicted to be $\sim$1% of the SZ signal at the $ξ>4$ threshold, and $<4\%$ of clusters have a predicted contamination $>10\% $ of their measured SZ flux. We associate SZ-selected clusters, from both SPT-ECS and the SPT-SZ survey, with clusters from the DES redMaPPer sample, and find an offset distribution between the SZ center and central galaxy in general agreement with previous work, though with a larger fraction of clusters with significant offsets. Adopting a fixed Planck-like cosmology, we measure the optical richness-to-SZ-mass ($λ-M$) relation and find it to be 28% shallower than that from a weak-lensing analysis of the DES data---a difference significant at the 4 $σ$ level---with the relations intersecting at $λ=60$ . The SPT-ECS cluster sample will be particularly useful for studying the evolution of massive clusters and, in combination with DES lensing observations and the SPT-SZ cluster sample, will be an important component of future cosmological analyses. △ Less

Submitted 13 December, 2019; v1 submitted 9 October, 2019; originally announced October 2019.

Comments: 49 pages, 14 figures, 10 tables. Minor changes to match accepted version in ApJS

Dam** enhancement in coherent ferrite/insulating-paramagnet bilayers

Authors: Jacob J. Wisser, Alexander J. Grutter, Dustin A. Gilbert, Alpha T. N'Diaye, Christoph Klewe, Padraic Shafer, Elke Arenholz, Yuri Suzuki, Satoru Emori

Abstract: High-quality epitaxial ferrites, such as low-dam** MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfa… ▽ More High-quality epitaxial ferrites, such as low-dam** MgAl-ferrite (MAFO), are promising nanoscale building blocks for all-oxide heterostructures driven by pure spin current. However, the impact of oxide interfaces on spin dynamics in such heterostructures remains an open question. Here, we investigate the spin dynamics and chemical and magnetic depth profiles of 15-nm-thick MAFO coherently interfaced with an isostructural $\approx$1-8-nm-thick overlayer of paramagnetic CoCr$_2$O$_4$ (CCO) as an all-oxide model system. Compared to MAFO without an overlayer, effective Gilbert dam** in MAFO/CCO is enhanced by a factor of $>$3, irrespective of the CCO overlayer thickness. We attribute this dam** enhancement to spin scattering at the $\sim$1-nm-thick chemically disordered layer at the MAFO/CCO interface, rather than spin pum** or proximity-induced magnetism. Our results indicate that dam** in ferrite-based heterostructures is strongly influenced by interfacial chemical disorder, even if the thickness of the disordered layer is a small fraction of the ferrite thickness. △ Less

Submitted 25 October, 2019; v1 submitted 22 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Applied 12, 054044 (2019)

Generalized Metric Repair on Graphs

Authors: Chenglin Fan, Anna C. Gilbert, Benjamin Raichel, Rishi Sonthalia, Gregory Van Buskirk

Abstract: Many modern data analysis algorithms either assume or are considerably more efficient if the distances between the data points satisfy a metric. These algorithms include metric learning, clustering, and dimension reduction. As real data sets are noisy, distances often fail to satisfy a metric. For this reason, Gilbert and Jain and Fan et al. introduced the closely related sparse metric repair and… ▽ More Many modern data analysis algorithms either assume or are considerably more efficient if the distances between the data points satisfy a metric. These algorithms include metric learning, clustering, and dimension reduction. As real data sets are noisy, distances often fail to satisfy a metric. For this reason, Gilbert and Jain and Fan et al. introduced the closely related sparse metric repair and metric violation distance problems. The goal of these problems is to repair as few distances as possible to ensure they satisfy a metric. Three variants were considered, one admitting a polynomial time algorithm. The other variants were shown to be APX-hard, and an $O(OPT^{1/3})$-approximation was given, where $OPT$ is the optimal solution size. In this paper, we generalize these problems to no longer consider all distances between the data points. That is, we consider a weighted graph $G$ with corrupted weights $w$, and our goal is to find the smallest number of weight modifications so that the resulting weighted graph distances satisfy a metric. This is a natural generalization and is more flexible as it takes into account different relationships among the data points. As in previous work, we distinguish among the types of repairs permitted and focus on the increase only and general versions. We demonstrate the inherent combinatorial structure of the problem, and give an approximation-preserving reduction from MULTICUT. Conversely, we show that for any fixed constant $ς$, for the large class of $ς$-chordal graphs, the problems are fixed parameter tractable. Call a cycle broken if it contains an edge whose weight is larger than the sum of all its other edges, and call the amount of this difference its deficit. We present approximation algorithms, one which depends on the maximum number of edges in a broken cycle, and one which depends on the number of distinct deficit values. △ Less

Submitted 21 August, 2019; originally announced August 2019.

Comments: arXiv admin note: text overlap with arXiv:1807.08078

CHIME/FRB Detection of Eight New Repeating Fast Radio Burst Sources

Authors: The CHIME/FRB Collaboration, :, B. C. Andersen, K. Bandura, M. Bhardwaj, P. Boubel, M. M. Boyce, P. J. Boyle, C. Brar, T. Cassanelli, P. Chawla, D. Cubranic, M. Deng, M. Dobbs, M. Fandino, E. Fonseca, B. M. Gaensler, A. J. Gilbert, U. Giri, D. C. Good, M. Halpern, A. S. Hill, G. Hinshaw, C. Höfer, A. Josephy , et al. (33 additional authors not shown)

Abstract: We report on the discovery of eight repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Map** Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 103.5 to 1281 pc cm$^{-3}$. They display varying degrees of activity: six sources were detected twice, another three times, and one ten times. These eight repeating FRBs likely represent… ▽ More We report on the discovery of eight repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Map** Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 103.5 to 1281 pc cm$^{-3}$. They display varying degrees of activity: six sources were detected twice, another three times, and one ten times. These eight repeating FRBs likely represent the bright and/or high-rate end of a distribution of infrequently repeating sources. For all sources, we determine sky coordinates with uncertainties of $\sim$10$^\prime$. FRB 180916.J0158+65 has a burst-averaged DM = $349.2 \pm 0.3$ pc cm$^{-3}$ and a low DM excess over the modelled Galactic maximum (as low as $\sim$20 pc cm$^{-3}$); this source also has a Faraday rotation measure (RM) of $-114.6 \pm 0.6$ rad m$^{-2}$, much lower than the RM measured for FRB 121102. FRB 181030.J1054+73 has the lowest DM for a repeater, $103.5 \pm 0.3$ pc cm$^{-3}$, with a DM excess of $\sim$ 70 pc cm$^{-3}$. Both sources are interesting targets for multi-wavelength follow-up due to their apparent proximity. The DM distribution of our repeater sample is statistically indistinguishable from that of the first 12 CHIME/FRB sources that have not repeated. We find, with 4$σ$ significance, that repeater bursts are generally wider than those of CHIME/FRB bursts that have not repeated, suggesting different emission mechanisms. Our repeater events show complex morphologies that are reminiscent of the first two discovered repeating FRBs. The repetitive behavior of these sources will enable interferometric localizations and subsequent host galaxy identifications. △ Less

Submitted 21 October, 2019; v1 submitted 9 August, 2019; originally announced August 2019.

Comments: 40 pages, 11 figures; accepted by ApJL on 28 September 2019; added analysis of correlation between width and max. flux density

Semantic Estimation of 3D Body Shape and Pose using Minimal Cameras

Authors: Andrew Gilbert, Matthew Trumble, Adrian Hilton, John Collomosse

Abstract: We aim to simultaneously estimate the 3D articulated pose and high fidelity volumetric occupancy of human performance, from multiple viewpoint video (MVV) with as few as two views. We use a multi-channel symmetric 3D convolutional encoder-decoder with a dual loss to enforce the learning of a latent embedding that enables inference of skeletal joint positions and a volumetric reconstruction of the… ▽ More We aim to simultaneously estimate the 3D articulated pose and high fidelity volumetric occupancy of human performance, from multiple viewpoint video (MVV) with as few as two views. We use a multi-channel symmetric 3D convolutional encoder-decoder with a dual loss to enforce the learning of a latent embedding that enables inference of skeletal joint positions and a volumetric reconstruction of the performance. The inference is regularised via a prior learned over a dataset of view-ablated multi-view video footage of a wide range of subjects and actions, and show this to generalise well across unseen subjects and actions. We demonstrate improved reconstruction accuracy and lower pose estimation error relative to prior work on two MVV performance capture datasets: Human 3.6M and TotalCapture. △ Less

Submitted 7 September, 2020; v1 submitted 8 August, 2019; originally announced August 2019.

Performance of Al-Mn Transition-Edge Sensor Bolometers in SPT-3G

Authors: A. J. Anderson, P. A. R. Ade, Z. Ahmed, J. S. Avva, P. S. Barry, R. Basu Thakur, A. N. Bender, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of the… ▽ More SPT-3G is a polarization-sensitive receiver, installed on the South Pole Telescope, that measures the anisotropy of the cosmic microwave background (CMB) from degree to arcminute scales. The receiver consists of ten 150~mm-diameter detector wafers, containing a total of 16,000 transition-edge sensor (TES) bolometers observing at 95, 150, and 220 GHz. During the 2018-2019 austral summer, one of these detector wafers was replaced by a new wafer fabricated with Al-Mn TESs instead of the Ti/Au design originally deployed for SPT-3G. We present the results of in-lab characterization and on-sky performance of this Al-Mn wafer, including electrical and thermal properties, optical efficiency measurements, and noise-equivalent temperature. In addition, we discuss and account for several calibration-related systematic errors that affect measurements made using frequency-domain multiplexing readout electronics. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures, submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Report number: FERMILAB-PUB-19-359-AE

On-sky performance of the SPT-3G frequency-domain multiplexed readout

Authors: A. N. Bender, A. J. Anderson, J. S. Avva, P. A. R. Ade, Z. Ahmed, P. S. Barry, R. Basu Thakur, B. A. Benson, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, H. -M. Cho, J. F. Cliche, A. Cukierman, T. de Haan, E. V. Denison, J. Ding, M. A. Dobbs, D. Dutcher, W. Everett, K. R. Ferguson, A. Foster , et al. (64 additional authors not shown)

Abstract: Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current… ▽ More Frequency-domain multiplexing (fMux) is an established technique for the readout of large arrays of transition edge sensor (TES) bolometers. Each TES in a multiplexing module has a unique AC voltage bias that is selected by a resonant filter. This scheme enables the operation and readout of multiple bolometers on a single pair of wires, reducing thermal loading onto sub-Kelvin stages. The current receiver on the South Pole Telescope, SPT-3G, uses a 68x fMux system to operate its large-format camera of $\sim$16,000 TES bolometers. We present here the successful implementation and performance of the SPT-3G readout as measured on-sky. Characterization of the noise reveals a median pair-differenced 1/f knee frequency of 33 mHz, indicating that low-frequency noise in the readout will not limit SPT-3G's measurements of sky power on large angular scales. Measurements also show that the median readout white noise level in each of the SPT-3G observing bands is below the expectation for photon noise, demonstrating that SPT-3G is operating in the photon-noise-dominated regime. △ Less

Submitted 25 July, 2019; originally announced July 2019.

Comments: 9 pages, 5 figures submitted to the Journal of Low Temperature Physics: LTD18 Special Edition

Galaxy Clusters Selected via the Sunyaev-Zel'dovich Effect in the SPTpol 100-Square-Degree Survey

Authors: N. Huang, L. E. Bleem, B. Stalder, P. A. R. Ade, S. W. Allen, A. J. Anderson, J. E. Austermann, J. S. Avva, J. A. Beall, A. N. Bender, B. A. Benson, F. Bianchini, S. Bocquet, M. Brodwin, J. E. Carlstrom, C. L. Chang, H. C. Chiang, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, B. Floyd , et al. (52 additional authors not shown)

Abstract: We present a catalog of galaxy cluster candidates detected in 100 square degrees surveyed with the SPTpol receiver on the South Pole Telescope. The catalog contains 89 candidates detected with a signal-to-noise ratio greater than 4.6. The candidates are selected using the Sunyaev-Zel'dovich effect at 95 and 150 GHz. Using both space- and ground-based optical and infrared telescopes, we have confir… ▽ More We present a catalog of galaxy cluster candidates detected in 100 square degrees surveyed with the SPTpol receiver on the South Pole Telescope. The catalog contains 89 candidates detected with a signal-to-noise ratio greater than 4.6. The candidates are selected using the Sunyaev-Zel'dovich effect at 95 and 150 GHz. Using both space- and ground-based optical and infrared telescopes, we have confirmed 81 candidates as galaxy clusters. We use these follow-up images and archival images to estimate photometric redshifts for 66 galaxy clusters and spectroscopic observations to obtain redshifts for 13 systems. An additional 2 galaxy clusters are confirmed using the overdensity of near-infrared galaxies only, and are presented without redshifts. We find that 15 candidates (18% of the total sample) are at redshift of $z \geq 1.0$, with a maximum confirmed redshift of $z_{\rm{max}} = 1.38 \pm 0.10$. We expect this catalog to contain every galaxy cluster with $M_{500c} > 2.6 \times 10^{14} M_\odot h^{-1}_{70}$ and $z > 0.25$ in the survey area. The mass threshold is approximately constant above $z = 0.25$, and the complete catalog has a median mass of approximately $ M_{500c} = 2.7 \times 10^{14} M_\odot h^{-1}_{70}$. Compared to previous SPT works, the increased depth of the millimeter-wave data (11.2 and 6.5 $μ$K-arcmin at 95 and 150 GHz, respectively) makes it possible to find more galaxy clusters at high redshift and lower mass. △ Less

Submitted 13 January, 2020; v1 submitted 22 July, 2019; originally announced July 2019.

Comments: 21 pages, 7 figures, associated data available at http://pole.uchicago.edu/public/data/sptsz-clusters. V2 was accepted to the AJ, and includes minor changes requested by the reviewer

Performance of a low-parasitic frequency-domain multiplexing readout

Authors: A. E. Lowitz, A. N. Bender, P. Barry, T. W. Cecil, C. L. Chang, R. Divan, M. A. Dobbs, A. J. Gilbert, S. E. Kuhlmann, M. Lisovenko, J. Montgomery, V. Novosad, S. Padin, J. E. Pearson, G. Wang, V. Yefremenko, J. Zhang

Abstract: Frequency-domain multiplexing is a readout technique for transition edge sensor bolometer arrays used on modern CMB experiments, including the SPT-3G receiver. Here, we present design details and performance measurements for a low-parasitic frequency-domain multiplexing readout. Reducing the parasitic impedance of the connections between cryogenic components provides a path to improving both the c… ▽ More Frequency-domain multiplexing is a readout technique for transition edge sensor bolometer arrays used on modern CMB experiments, including the SPT-3G receiver. Here, we present design details and performance measurements for a low-parasitic frequency-domain multiplexing readout. Reducing the parasitic impedance of the connections between cryogenic components provides a path to improving both the crosstalk and noise performance of the readout. Reduced crosstalk will in turn allow higher multiplexing factors. We have demonstrated a factor of two improvement in parasitic resistance compared to SPT-3G hardware. Reduced parasitics also permits operation of lower-resistance bolometers, which enables better optimization of R$_{\rm{bolo}}$ for improved readout noise performance. The prototype system exhibits noise performance comparable to SPT-3G readout hardware when operating SPT-3G detectors. △ Less

Submitted 21 July, 2019; originally announced July 2019.

Comments: 7 pages, 4 figures. Submitted to J. Low Temp. Detectors

A Detection of CMB-Cluster Lensing using Polarization Data from SPTpol

Authors: S. Raghunathan, S. Patil, E. Baxter, B. A. Benson, L. E. Bleem, T. M. Crawford, G. P. Holder, T. McClintock, C. L. Reichardt, T. N. Varga, N. Whitehorn, P. A. R. Ade, S. Allam, A. J. Anderson, J. E. Austermann, S. Avila, J. S. Avva, D. Bacon, J. A. Beall, A. N. Bender, F. Bianchini, S. Bocquet, D. Brooks, D. L. Burke, J. E. Carlstrom , et al. (104 additional authors not shown)

Abstract: We report the first detection of gravitational lensing due to galaxy clusters using only the polarization of the cosmic microwave background (CMB). The lensing signal is obtained using a new estimator that extracts the lensing dipole signature from stacked images formed by rotating the cluster-centered Stokes $Q/U$ map cutouts along the direction of the locally measured background CMB polarization… ▽ More We report the first detection of gravitational lensing due to galaxy clusters using only the polarization of the cosmic microwave background (CMB). The lensing signal is obtained using a new estimator that extracts the lensing dipole signature from stacked images formed by rotating the cluster-centered Stokes $Q/U$ map cutouts along the direction of the locally measured background CMB polarization gradient. Using data from the SPTpol 500 deg$^{2}$ survey at the locations of roughly 18,000 clusters with richness $λ\ge 10$ from the Dark Energy Survey (DES) Year-3 full galaxy cluster catalog, we detect lensing at $4.8σ$. The mean stacked mass of the selected sample is found to be $(1.43 \pm 0.4)\ \times 10^{14}\ {\rm M_{\odot}}$ which is in good agreement with optical weak lensing based estimates using DES data and CMB-lensing based estimates using SPTpol temperature data. This measurement is a key first step for cluster cosmology with future low-noise CMB surveys, like CMB-S4, for which CMB polarization will be the primary channel for cluster lensing measurements. △ Less

Submitted 24 September, 2019; v1 submitted 19 July, 2019; originally announced July 2019.

Comments: 10 pages, 3 figures, 1 table; typos fixed; accepted for publication in PRL

Journal ref: Phys. Rev. Lett. 123, 181301 (2019)

Sparse Recovery for Orthogonal Polynomial Transforms

Authors: Anna Gilbert, Albert Gu, Christopher Re, Atri Rudra, Mary Wootters

Abstract: In this paper we consider the following sparse recovery problem. We have query access to a vector $\vx \in \R^N$ such that $\vhx = \vF \vx$ is $k$-sparse (or nearly $k$-sparse) for some orthogonal transform $\vF$. The goal is to output an approximation (in an $\ell_2$ sense) to $\vhx$ in sublinear time. This problem has been well-studied in the special case that $\vF$ is the Discrete Fourier Trans… ▽ More In this paper we consider the following sparse recovery problem. We have query access to a vector $\vx \in \R^N$ such that $\vhx = \vF \vx$ is $k$-sparse (or nearly $k$-sparse) for some orthogonal transform $\vF$. The goal is to output an approximation (in an $\ell_2$ sense) to $\vhx$ in sublinear time. This problem has been well-studied in the special case that $\vF$ is the Discrete Fourier Transform (DFT), and a long line of work has resulted in sparse Fast Fourier Transforms that run in time $O(k \cdot \mathrm{polylog} N)$. However, for transforms $\vF$ other than the DFT (or closely related transforms like the Discrete Cosine Transform), the question is much less settled. In this paper we give sublinear-time algorithms---running in time $\poly(k \log(N))$---for solving the sparse recovery problem for orthogonal transforms $\vF$ that arise from orthogonal polynomials. More precisely, our algorithm works for any $\vF$ that is an orthogonal polynomial transform derived from Jacobi polynomials. The Jacobi polynomials are a large class of classical orthogonal polynomials (and include Chebyshev and Legendre polynomials as special cases), and show up extensively in applications like numerical analysis and signal processing. One caveat of our work is that we require an assumption on the sparsity structure of the sparse vector, although we note that vectors with random support have this property with high probability. Our approach is to give a very general reduction from the $k$-sparse sparse recovery problem to the $1$-sparse sparse recovery problem that holds for any flat orthogonal polynomial transform; then we solve this one-sparse recovery problem for transforms derived from Jacobi polynomials. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: 64 pages

Fractional Polarisation of Extragalactic Sources in the 500-square-degree SPTpol Survey

Authors: N. Gupta, C. L. Reichardt, P. A. R. Ade, A. J. Anderson, M. Archipley, J. E. Austermann, J. S. Avva, J. A. Beall, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, J. E. Carlstrom, C. L. Chang, H. C. Chiang, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, C. Feng, J. Gallicchio, E. M. George , et al. (55 additional authors not shown)

Abstract: We study the polarisation properties of extragalactic sources at 95 and 150 GHz in the SPTpol 500 deg$^2$ survey. We estimate the polarised power by stacking maps at known source positions, and correct for noise bias by subtracting the mean polarised power at random positions in the maps. We show that the method is unbiased using a set of simulated maps with similar noise properties to the real SP… ▽ More We study the polarisation properties of extragalactic sources at 95 and 150 GHz in the SPTpol 500 deg$^2$ survey. We estimate the polarised power by stacking maps at known source positions, and correct for noise bias by subtracting the mean polarised power at random positions in the maps. We show that the method is unbiased using a set of simulated maps with similar noise properties to the real SPTpol maps. We find a flux-weighted mean-squared polarisation fraction $\langle p^2 \rangle= [8.9\pm1.1] \times 10^{-4}$ at 95 GHz and $[6.9\pm1.1] \times 10^{-4}$ at 150~GHz for the full sample. This is consistent with the values obtained for a sub-sample of active galactic nuclei. For dusty sources, we find 95 per cent upper limits of $\langle p^2 \rangle_{\rm 95}<16.9 \times 10^{-3}$ and $\langle p^2 \rangle_{\rm 150}<2.6 \times 10^{-3}$. We find no evidence that the polarisation fraction depends on the source flux or observing frequency. The 1-$σ$ upper limit on measured mean squared polarisation fraction at 150 GHz implies that extragalactic foregrounds will be subdominant to the CMB E and B mode polarisation power spectra out to at least $\ell\lesssim5700$ ($\ell\lesssim4700$) and $\ell\lesssim5300$ ($\ell\lesssim3600$), respectively at 95 (150) GHz. △ Less

Submitted 17 January, 2020; v1 submitted 3 July, 2019; originally announced July 2019.

Comments: 10 pages, 5 figures

Indications for Dzyaloshinskii-Moriya Interaction at the Pd/Fe Interface Studied by \textit{In Situ} Polarized Neutron Reflectometry

Authors: Sina Mayr, **gfan Ye, Jochen Stahn, Birgit Knoblich, Oliver Klein, Dustin A. Gilbert, Manfred Albrecht, Amitesh Paul, Peter Böni, Wolfgang Kreuzpaintner

Abstract: Using \textit{in situ} polarized neutron reflectometry, the depth resolved evolution of the magnetism and structure in a Pd/Fe/Pd trilayer thin-film is measured during growth. The initial film structure of Pd/Fe shows a small proximity induced magnetism in the underlayer and a magnetization in the Fe layer of $\approx1.6$\,$μ_{\text{B}}$ per Fe atom, less than the expected bulk value of $2.2$\,… ▽ More Using \textit{in situ} polarized neutron reflectometry, the depth resolved evolution of the magnetism and structure in a Pd/Fe/Pd trilayer thin-film is measured during growth. The initial film structure of Pd/Fe shows a small proximity induced magnetism in the underlayer and a magnetization in the Fe layer of $\approx1.6$\,$μ_{\text{B}}$ per Fe atom, less than the expected bulk value of $2.2$\,$μ_{\text{B}}$. Deposition of the Pd cap** layer initially follows an island-like growth mode with subsequent coalescence. With increasing Pd deposition the Fe moment and the proximity-induced magnetism in the Pd cap** layer decrease. After final deposition of the Pd cap** layer, the magnetic profile is structurally and magnetically symmetric across the Fe layer, with magnetism induced in Pd up to 0.92 \,nm from the interface. Throughout the Pd deposition the Pd/Fe/Pd trilayer structure is becoming increasingly symmetric, a fact which points to a Dzyaloshinskii-Moriya interaction as a likely cause of the observed magnetic behavior. △ Less

Submitted 27 June, 2019; originally announced June 2019.

Comments: Submitted for publication in PRB (original version) on April 17, 2019

Journal ref: Phys. Rev. B 101, 024404 (2020)

A Measurement of the Cosmic Microwave Background Lensing Potential and Power Spectrum from 500 deg$^2$ of SPTpol Temperature and Polarization Data

Authors: W. L. K. Wu, L. M. Mocanu, P. A. R. Ade, A. J. Anderson, J. E. Austermann, J. S. Avva, J. A. Beall, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, J. E. Carlstrom, C. L. Chang, H. C. Chiang, R. Citron, C. Corbett Moran, T. M. Crawford, A. T. Crites, T. de Haan, M. A. Dobbs, W. Everett, J. Gallicchio, E. M. George, A. Gilbert, N. Gupta , et al. (46 additional authors not shown)

Abstract: We present a measurement of the cosmic microwave background (CMB) lensing potential using 500 deg$^2$ of 150 GHz data from the SPTpol receiver on the South Pole Telescope. The lensing potential is reconstructed with signal-to-noise per mode greater than unity at lensing multipoles $L \lesssim 250$, using a quadratic estimator on a combination of CMB temperature and polarization maps. We report mea… ▽ More We present a measurement of the cosmic microwave background (CMB) lensing potential using 500 deg$^2$ of 150 GHz data from the SPTpol receiver on the South Pole Telescope. The lensing potential is reconstructed with signal-to-noise per mode greater than unity at lensing multipoles $L \lesssim 250$, using a quadratic estimator on a combination of CMB temperature and polarization maps. We report measurements of the lensing potential power spectrum in the multipole range of $100< L < 2000$ from sets of temperature-only, polarization-only, and minimum-variance estimators. We measure the lensing amplitude by taking the ratio of the measured spectrum to the expected spectrum from the best-fit $Λ$CDM model to the $\textit{Planck}$ 2015 TT+lowP+lensing dataset. For the minimum-variance estimator, we find $A_{\rm{MV}} = 0.944 \pm 0.058{\rm (Stat.)}\pm0.025{\rm (Sys.)}$; restricting to only polarization data, we find $A_{\rm{POL}} = 0.906 \pm 0.090 {\rm (Stat.)} \pm 0.040 {\rm (Sys.)}$. Considering statistical uncertainties alone, this is the most precise polarization-only lensing amplitude constraint to date (10.1 $σ$), and is more precise than our temperature-only constraint. We perform null tests and consistency checks and find no evidence for significant contamination. △ Less

Submitted 22 October, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Comments: 18 pages, 8 figures; updated to match published version

Journal ref: ApJ 884 70 (2019)

Realization of Ordered Magnetic Skyrmions in Thin Films at Ambient Conditions

Authors: Ryan D. Desautels, Lisa DeBeer-Schmitt, Sergio Montoya, Julie A. Borchers, Soong-Geun Je, Nan Tang, Mi-Young Im, Michael R. Fitzsimmons, Eric E. Fullerton, Dustin A. Gilbert

Abstract: Magnetic skyrmions present interesting physics due to their topological nature and hold significant promise for future information technologies. A key barrier to realizing skyrmion devices has been stabilizing these spin structures under ambient conditions. In this manuscript, we exploit the tunable magnetic properties of amorphous Fe/Gd mulitlayers to realize skyrmion lattices which are stable ov… ▽ More Magnetic skyrmions present interesting physics due to their topological nature and hold significant promise for future information technologies. A key barrier to realizing skyrmion devices has been stabilizing these spin structures under ambient conditions. In this manuscript, we exploit the tunable magnetic properties of amorphous Fe/Gd mulitlayers to realize skyrmion lattices which are stable over a large temperature and magnetic field parameter space, including room temperature and zero magnetic field. These hybrid skyrmions have both Bloch-type and Néel-type character and are stabilized by dipolar interactions rather than Dzyaloshinskii-Moriya interactions, which are typically considered required for the generation of skyrmions. Small angle neutron scattering (SANS) was used in combination with soft X-ray microscopy to provide a unique, multi-scale probe of the local and long-range order of these structures. These results identify a pathway to engineer controllable skyrmion phases in thin film geometries which are stable at ambient conditions. △ Less

Submitted 30 April, 2019; originally announced April 2019.

Comments: 17 pages, 5 figures

Journal ref: Phys. Rev. Materials 3, 104406 (2019)

Nonlinear Iterative Hard Thresholding for Inverse Scattering

Authors: Anna C. Gilbert, Howard W. Levinson, John C. Schotland

Abstract: We consider the inverse scattering problem for sparse scatterers. An image reconstruction algorithm is proposed that is based on a nonlinear generalization of iterative hard thresholding. The convergence and error of the method was analyzed by means of coherence estimates and compared to numerical simulations. We consider the inverse scattering problem for sparse scatterers. An image reconstruction algorithm is proposed that is based on a nonlinear generalization of iterative hard thresholding. The convergence and error of the method was analyzed by means of coherence estimates and compared to numerical simulations. △ Less

Submitted 22 March, 2019; originally announced March 2019.

Comments: 30 pages, 10 figures

Deep Shape from Polarization

Authors: Yunhao Ba, Alex Ross Gilbert, Franklin Wang, **fa Yang, Rui Chen, Yiqin Wang, Lei Yan, Boxin Shi, Achuta Kadambi

Abstract: This paper makes a first attempt to bring the Shape from Polarization (SfP) problem to the realm of deep learning. The previous state-of-the-art methods for SfP have been purely physics-based. We see value in these principled models, and blend these physical models as priors into a neural network architecture. This proposed approach achieves results that exceed the previous state-of-the-art on a c… ▽ More This paper makes a first attempt to bring the Shape from Polarization (SfP) problem to the realm of deep learning. The previous state-of-the-art methods for SfP have been purely physics-based. We see value in these principled models, and blend these physical models as priors into a neural network architecture. This proposed approach achieves results that exceed the previous state-of-the-art on a challenging dataset we introduce. This dataset consists of polarization images taken over a range of object textures, paints, and lighting conditions. We report that our proposed method achieves the lowest test error on each tested condition in our dataset, showing the value of blending data-driven and physics-driven approaches. △ Less

Submitted 25 May, 2020; v1 submitted 25 March, 2019; originally announced March 2019.

Design and Bolometer Characterization of the SPT-3G First-year Focal Plane

Authors: W. Everett, P. A. R. Ade, Z. Ahmed, A. J. Anderson, J. E. Austermann, J. S. Avva, R. Basu Thakur, A. N. Bender, B. A. Benson, J. E. Carlstrom, F. W. Carter, T. Cecil, C. L. Chang, J. F. Cliche, A. Cukierman, E. V. Denison, T. de Haan, J. Ding, M. A. Dobbs, D. Dutcher, A. Foster, R. N. Gannon, A. Gilbert, J. C. Groh, N. W. Halverson , et al. (51 additional authors not shown)

Abstract: During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization… ▽ More During the austral summer of 2016-17, the third-generation camera, SPT-3G, was installed on the South Pole Telescope, increasing the detector count in the focal plane by an order of magnitude relative to the previous generation. Designed to map the polarization of the cosmic microwave background, SPT-3G contains ten 6-in-hexagonal modules of detectors, each with 269 trichroic and dual-polarization pixels, read out using 68x frequency-domain multiplexing. Here we discuss design, assembly, and layout of the modules, as well as early performance characterization of the first-year array, including yield and detector properties. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: Conference proceeding for Low Temperature Detectors 2017. Accepted for publication: 27 August 2018

Higgs Physics at the HL-LHC and HE-LHC

Authors: M. Cepeda, S. Gori, P. Ilten, M. Kado, F. Riva, R. Abdul Khalek, A. Aboubrahim, J. Alimena, S. Alioli, A. Alves, C. Asawatangtrakuldee, A. Azatov, P. Azzi, S. Bailey, S. Banerjee, E. L. Barberio, D. Barducci, G. Barone, M. Bauer, C. Bautista, P. Bechtle, K. Becker, A. Benaglia, M. Bengala, N. Berger , et al. (352 additional authors not shown)

Abstract: The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the… ▽ More The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the discovery, with a conspicuously larger dataset collected during LHC Run 2 at a 13 TeV centre-of-mass energy, the theory and experimental particle physics communities have started a meticulous exploration of the potential for precision measurements of its properties. This includes studies of Higgs boson production and decays processes, the search for rare decays and production modes, high energy observables, and searches for an extended electroweak symmetry breaking sector. This report summarises the potential reach and opportunities in Higgs physics during the High Luminosity phase of the LHC, with an expected dataset of pp collisions at 14 TeV, corresponding to an integrated luminosity of 3 ab$^{-1}$. These studies are performed in light of the most recent analyses from LHC collaborations and the latest theoretical developments. The potential of an LHC upgrade, colliding protons at a centre-of-mass energy of 27 TeV and producing a dataset corresponding to an integrated luminosity of 15 ab$^{-1}$, is also discussed. △ Less

Submitted 19 March, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Report from Working Group 2 on the Physics of the HL-LHC, and Perspectives at the HE-LHC, 364 pages

Report number: CERN-LPCC-2018-04

Bounding the spectral gap for an elliptic eigenvalue problem with uniformly bounded stochastic coefficients

Authors: Alexander D. Gilbert, Ivan G. Graham, Robert Scheichl, Ian H. Sloan

Abstract: A key quantity that occurs in the error analysis of several numerical methods for eigenvalue problems is the distance between the eigenvalue of interest and the next nearest eigenvalue. When we are interested in the smallest or fundamental eigenvalue, we call this the spectral or fundamental gap. In a recent manuscript [Gilbert et al., arXiv:1808.02639], the current authors, together with Frances… ▽ More A key quantity that occurs in the error analysis of several numerical methods for eigenvalue problems is the distance between the eigenvalue of interest and the next nearest eigenvalue. When we are interested in the smallest or fundamental eigenvalue, we call this the spectral or fundamental gap. In a recent manuscript [Gilbert et al., arXiv:1808.02639], the current authors, together with Frances Kuo, studied an elliptic eigenvalue problem with homogeneous Dirichlet boundary conditions, and with coefficients that depend on an infinite number of uniformly distributed stochastic parameters. In this setting, the eigenvalues, and in turn the eigenvalue gap, also depend on the stochastic parameters. Hence, for a robust error analysis one needs to be able to bound the gap over all possible realisations of the parameters, and because the gap depends on infinitely-many random parameters, this is not trivial. This short note presents, in a simplified setting, an important result that was shown in the paper above. Namely, that, under certain decay assumptions on the coefficient, the spectral gap of such a random elliptic eigenvalue problem can be bounded away from 0, uniformly over the entire infinite-dimensional parameter space. △ Less

Submitted 29 January, 2019; originally announced January 2019.

Comments: 12 pages, 5 figures. arXiv admin note: text overlap with arXiv:1808.02639

A Second Source of Repeating Fast Radio Bursts

Authors: The CHIME/FRB Collaboration, :, M. Amiri, K. Bandura, M. Bhardwaj, P. Boubel, M. M. Boyce, P. J. Boyle, C. Brar, M. Burhanpurkar, T. Cassanelli, P. Chawla, J. F. Cliche, D. Cubranic, M. Deng, N. Denman, M. Dobbs, M. Fandino, E. Fonseca, B. M. Gaensler, A. J. Gilbert, A. Gill, U. Giri, D. C. Good, M. Halpern , et al. (36 additional authors not shown)

Abstract: The discovery of a repeating Fast Radio Burst (FRB) source, FRB 121102, eliminated models involving cataclysmic events for this source. No other repeating FRB has yet been detected in spite of many recent FRB discoveries and follow-ups, suggesting repeaters may be rare in the FRB population. Here we report the detection of six repeat bursts from FRB 180814.J0422+73, one of the 13 FRBs detected by… ▽ More The discovery of a repeating Fast Radio Burst (FRB) source, FRB 121102, eliminated models involving cataclysmic events for this source. No other repeating FRB has yet been detected in spite of many recent FRB discoveries and follow-ups, suggesting repeaters may be rare in the FRB population. Here we report the detection of six repeat bursts from FRB 180814.J0422+73, one of the 13 FRBs detected by the Canadian Hydrogen Intensity Map** Experiment (CHIME) FRB project during its pre-commissioning phase in July and August 2018. These repeat bursts are consistent with originating from a single position on the sky, with the same dispersion measure (DM), ~189 pc cm-3. This DM is approximately twice the expected Milky Way column density, and implies an upper limit on the source redshift of 0.1, at least a factor of ~2 closer than FRB 121102. In some of the repeat bursts, we observe sub-pulse frequency structure, drifting, and spectral variation reminiscent of that seen in FRB 121102, suggesting similar emission mechanisms and/or propagation effects. This second repeater, found among the first few CHIME/FRB discoveries, suggests that there exists -- and that CHIME/FRB and other wide-field, sensitive radio telescopes will find -- a substantial population of repeating FRBs. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: accepted by Nature

Observations of Fast Radio Bursts at Frequencies down to 400 Megahertz

Authors: CHIME/FRB Collaboration, :, Mandana Amiri, Kevin Bandura, Mohit Bhardwaj, Paula Boubel, Michelle M. Boyce, Patrick J. Boyle, Charanjot Brar, Maya Burhanpurkar, Pragya Chawla, Jean F. Cliche, Davor Cubranic, Meiling Deng, Nolan Denman, Matthew Dobbs, M. Fandino, Emmanuel Fonseca, Bryan M. Gaensler, Adam J. Gilbert, Utkarsh Giri, Deborah C. Good, Mark Halpern, David Hanna, Alexander S. Hill , et al. (31 additional authors not shown)

Abstract: Fast radio bursts (FRBs) are highly dispersed millisecond-duration radio flashes likely arriving from far outside the Milky Way galaxy. This phenomenon was discovered at radio frequencies near 1.4 GHz and to date has been observed in one case at as high as 8 GHz, but not below 700 MHz in spite of significant searches at low frequencies. Here we report detections of FRBs at radio frequencies as low… ▽ More Fast radio bursts (FRBs) are highly dispersed millisecond-duration radio flashes likely arriving from far outside the Milky Way galaxy. This phenomenon was discovered at radio frequencies near 1.4 GHz and to date has been observed in one case at as high as 8 GHz, but not below 700 MHz in spite of significant searches at low frequencies. Here we report detections of FRBs at radio frequencies as low as 400 MHz, on the Canadian Hydrogen Intensity Map** Experiment (CHIME) using the CHIME/FRB instrument. We present 13 FRBs detected during a telescope pre-commissioning phase, when our sensitivity and field-of-view were not yet at design specifications. Emission in multiple events is seen down to 400 MHz, the lowest radio frequency to which we are sensitive. The FRBs show a variety of temporal scattering behaviours, with the majority significantly scattered, and some apparently unscattered to within measurement uncertainty even at our lowest frequencies. Of the 13 reported here, one event has the lowest dispersion measure yet reported, implying it is among the closest yet known, and another has shown multiple repeat bursts, as described in a companion paper. Our low-scattering events suggest that efforts to detect FRBs at radio frequencies below 400 MHz will eventually be successful. The overall scattering properties of our sample suggest that FRBs as a class are preferentially located in environments that scatter radio waves more strongly than the diffuse interstellar medium (ISM) in the Milky Way. △ Less

Submitted 14 January, 2019; originally announced January 2019.

Comments: Accepted in Nature

Opportunities in Flavour Physics at the HL-LHC and HE-LHC

Authors: A. Cerri, V. V. Gligorov, S. Malvezzi, J. Martin Camalich, J. Zupan, S. Akar, J. Alimena, B. C. Allanach, W. Altmannshofer, L. Anderlini, F. Archilli, P. Azzi, S. Banerjee, W. Barter, A. E. Barton, M. Bauer, I. Belyaev, S. Benson, M. Bettler, R. Bhattacharya, S. Bifani, A. Birnkraut, F. Bishara, T. Blake, S. Blusk , et al. (278 additional authors not shown)

Abstract: Motivated by the success of the flavour physics programme carried out over the last decade at the Large Hadron Collider (LHC), we characterize in detail the physics potential of its High-Luminosity and High-Energy upgrades in this domain of physics. We document the extraordinary breadth of the HL/HE-LHC programme enabled by a putative Upgrade II of the dedicated flavour physics experiment LHCb and… ▽ More Motivated by the success of the flavour physics programme carried out over the last decade at the Large Hadron Collider (LHC), we characterize in detail the physics potential of its High-Luminosity and High-Energy upgrades in this domain of physics. We document the extraordinary breadth of the HL/HE-LHC programme enabled by a putative Upgrade II of the dedicated flavour physics experiment LHCb and the evolution of the established flavour physics role of the ATLAS and CMS general purpose experiments. We connect the dedicated flavour physics programme to studies of the top quark, Higgs boson, and direct high-$p_T$ searches for new particles and force carriers. We discuss the complementarity of their discovery potential for physics beyond the Standard Model, affirming the necessity to fully exploit the LHC's flavour physics potential throughout its upgrade eras. △ Less

Submitted 20 February, 2019; v1 submitted 18 December, 2018; originally announced December 2018.

Comments: Report from Working Group 4 on the Physics of the HL-LHC, and Perspectives at the HE-LHC, 292 pages

Exploring interfacial exchange coupling and sublattice effect in heavy metal/ferrimagnetic insulator heterostructures using Hall measurements, x-ray magnetic circular dichroism, and neutron reflectometry

Authors: Qiming Shao, Alexander Grutter, Yawen Liu, Guoqiang Yu, Chao-Yao Yang, Dustin A. Gilbert, Elke Arenholz, Padraic Shafer, Xiaoyu Che, Chi Tang, Mohammed Aldosary, Aryan Navabi, Qing Lin He, Brian J. Kirby, **g Shi, Kang L. Wang

Abstract: We use temperature-dependent Hall measurements to identify contributions of spin Hall, magnetic proximity, and sublattice effects to the anomalous Hall signal in heavy metal/ferrimagnetic insulator heterostructures with perpendicular magnetic anisotropy. This approach enables detection of both the magnetic proximity effect onset temperature and the magnetization compensation temperature and provid… ▽ More We use temperature-dependent Hall measurements to identify contributions of spin Hall, magnetic proximity, and sublattice effects to the anomalous Hall signal in heavy metal/ferrimagnetic insulator heterostructures with perpendicular magnetic anisotropy. This approach enables detection of both the magnetic proximity effect onset temperature and the magnetization compensation temperature and provides essential information regarding the interfacial exchange coupling. Onset of a magnetic proximity effect yields a local extremum in the temperature-dependent anomalous Hall signal, which occurs at higher temperature as magnetic insulator thickness increases. This magnetic proximity effect onset occurs at much higher temperature in Pt than W. The magnetization compensation point is identified by a sharp anomalous Hall sign change and divergent coercive field. We directly probe the magnetic proximity effect using x-ray magnetic circular dichroism and polarized neutron reflectometry, which reveal an antiferromagnetic coupling between W and the magnetic insulator. Finally, we summarize the exchange-coupling configurations and the anomalous Hall-effect sign of the magnetized heavy metal in various heavy metal/magnetic insulator heterostructures. △ Less

Submitted 26 February, 2019; v1 submitted 20 November, 2018; originally announced November 2018.

Journal ref: Phys. Rev. B 99, 104401 (2019)

Immobilization of convex bodies in $R^n$

Authors: Anthony David Gilbert, Saul Hannington Nsubuga

Abstract: We extend to arbitrary finite $n$ the notion of immobilization of a convex body $O$ in $R^n$ by a finite set of points $P$ in the boundary of $O$. Because of its importance for this problem, necessary and sufficient conditions are found for the immobilization of an $n$-simplex. A fairly complete geometric description of these conditions is given: as $n$ increases from $n = 2$, some qualitative dif… ▽ More We extend to arbitrary finite $n$ the notion of immobilization of a convex body $O$ in $R^n$ by a finite set of points $P$ in the boundary of $O$. Because of its importance for this problem, necessary and sufficient conditions are found for the immobilization of an $n$-simplex. A fairly complete geometric description of these conditions is given: as $n$ increases from $n = 2$, some qualitative difference in the nature of the sets $P$ emerges. △ Less

Submitted 26 October, 2018; originally announced October 2018.

Comments: 27 pags

MSC Class: Primary 52A20; Secondary 52A15

Mass Calibration of Optically Selected DES clusters using a Measurement of CMB-Cluster Lensing with SPTpol Data

Authors: S. Raghunathan, S. Patil, E. Baxter, B. A. Benson, L. E. Bleem, T. L. Chou, T. M. Crawford, G. P. Holder, T. McClintock, C. L. Reichardt, E. Rozo, T. N. Varga, T. M. C. Abbott, P. A. R. Ade, S. Allam, A. J. Anderson, J. Annis, J. E. Austermann, S. Avila, J. A. Beall, K. Bechtol, A. N. Bender, G. Bernstein, E. Bertin, F. Bianchini , et al. (107 additional authors not shown)

Abstract: We use cosmic microwave background (CMB) temperature maps from the 500 deg$^{2}$ SPTpol survey to measure the stacked lensing convergence of galaxy clusters from the Dark Energy Survey (DES) Year-3 redMaPPer (RM) cluster catalog. The lensing signal is extracted through a modified quadratic estimator designed to be unbiased by the thermal Sunyaev-Zel{'}dovich (tSZ) effect. The modified estimator us… ▽ More We use cosmic microwave background (CMB) temperature maps from the 500 deg$^{2}$ SPTpol survey to measure the stacked lensing convergence of galaxy clusters from the Dark Energy Survey (DES) Year-3 redMaPPer (RM) cluster catalog. The lensing signal is extracted through a modified quadratic estimator designed to be unbiased by the thermal Sunyaev-Zel{'}dovich (tSZ) effect. The modified estimator uses a tSZ-free map, constructed from the SPTpol 95 and 150 GHz datasets, to estimate the background CMB gradient. For lensing reconstruction, we employ two versions of the RM catalog: a flux-limited sample containing 4003 clusters and a volume-limited sample with 1741 clusters. We detect lensing at a significance of 8.7$σ$(6.7$σ$) with the flux(volume)-limited sample. By modeling the reconstructed convergence using the Navarro-Frenk-White profile, we find the average lensing masses to be $M_{200m}$ = ($1.62^{+0.32}_{-0.25}$ [stat.] $\pm$ 0.04 [sys.]) and ($1.28^{+0.14}_{-0.18}$ [stat.] $\pm$ 0.03 [sys.]) $\times\ 10^{14}\ M_{\odot}$ for the volume- and flux-limited samples respectively. The systematic error budget is much smaller than the statistical uncertainty and is dominated by the uncertainties in the RM cluster centroids. We use the volume-limited sample to calibrate the normalization of the mass-richness scaling relation, and find a result consistent with the galaxy weak-lensing measurements from DES (Mcclintock et al. 2018). △ Less

Submitted 20 February, 2019; v1 submitted 25 October, 2018; originally announced October 2018.

Comments: 19 pages, 6 figures, published in ApJ

Precipitating Ordered Skyrmion Lattices from Helical Spaghetti

Authors: Dustin A. Gilbert, Alexander J. Grutter, Paul M. Neves, Guo-Jiun Shu, Gergely Zimanyi, Brian B. Maranville, Fang-Cheng Chou, Kathryn Krycka, Nicholas P. Butch, Sunxiang Huang, Julie A. Borchers

Abstract: Magnetic skyrmions have been the focus of intense research due to their potential applications in ultra-high density data and logic technologies, as well as for the unique physics arising from their antisymmetric exchange term and topological protections. In this work we prepare a chiral jammed state in chemically disordered (Fe, Co)Si consisting of a combination of randomly-oriented magnetic heli… ▽ More Magnetic skyrmions have been the focus of intense research due to their potential applications in ultra-high density data and logic technologies, as well as for the unique physics arising from their antisymmetric exchange term and topological protections. In this work we prepare a chiral jammed state in chemically disordered (Fe, Co)Si consisting of a combination of randomly-oriented magnetic helices, labyrinth domains, rotationally disordered skyrmion lattices and/or isolated skyrmions. Using small angle neutron scattering, (SANS) we demonstrate a symmetry-breaking magnetic field sequence which disentangles the jammed state, resulting in an ordered, oriented skyrmion lattice. The same field sequence was performed on a sample of powdered Cu2OSeO3 and again yields an ordered, oriented skyrmion lattice, despite relatively non-interacting nature of the grains. Micromagnetic simulations confirm the promotion of a preferred skyrmion lattice orientation after field treatment, independent of the initial configuration, suggesting this effect may be universally applicable. Energetics extracted from the simulations suggest that approaching a magnetic hard axis causes the moments to diverge away from the magnetic field, increasing the Dzyaloshinskii-Moriya energy, followed subsequently by a lattice re-orientation. The ability to facilitate an emergent ordered magnetic lattice with long-range orientation in a variety of materials despite overwhelming internal disorder enables the study of skyrmions even in imperfect powdered or polycrystalline systems and greatly improves the ability to rapidly screen candidate skyrmion materials. △ Less

Submitted 17 October, 2018; originally announced October 2018.

Journal ref: Phys. Rev. Materials 3, 014408 (2019)

On the Approximation Properties of Random ReLU Features

Authors: Yitong Sun, Anna Gilbert, Ambuj Tewari

Abstract: We study the approximation properties of random ReLU features through their reproducing kernel Hilbert space (RKHS). We first prove a universality theorem for the RKHS induced by random features whose feature maps are of the form of nodes in neural networks. The universality result implies that the random ReLU features method is a universally consistent learning algorithm. We prove that despite th… ▽ More We study the approximation properties of random ReLU features through their reproducing kernel Hilbert space (RKHS). We first prove a universality theorem for the RKHS induced by random features whose feature maps are of the form of nodes in neural networks. The universality result implies that the random ReLU features method is a universally consistent learning algorithm. We prove that despite the universality of the RKHS induced by the random ReLU features, composition of functions in it generates substantially more complicated functions that are harder to approximate than those functions simply in the RKHS. We also prove that such composite functions can be efficiently approximated by multi-layer ReLU networks with bounded weights. This depth separation result shows that the random ReLU features models suffer from the same weakness as that of shallow models. We show in experiments that the performance of random ReLU features is comparable to that of random Fourier features and, in general, has a lower computational cost. We also demonstrate that when the target function is the composite function as described in the depth separation theorem, 3-layer neural networks indeed outperform both random ReLU features and 2-layer neural networks. △ Less

Submitted 16 August, 2019; v1 submitted 10 October, 2018; originally announced October 2018.

Hiding the weights -- CBC black box algorithms with a guaranteed error bound

Authors: Alexander D. Gilbert, Frances Y. Kuo, Ian H. Sloan

Abstract: The component-by-component (CBC) algorithm is a method for constructing good generating vectors for lattice rules for the efficient computation of high-dimensional integrals in the "weighted" function space setting introduced by Sloan and Woźniakowski. The "weights" that define such spaces are needed as inputs into the CBC algorithm, and so a natural question is, for a given problem how does one c… ▽ More The component-by-component (CBC) algorithm is a method for constructing good generating vectors for lattice rules for the efficient computation of high-dimensional integrals in the "weighted" function space setting introduced by Sloan and Woźniakowski. The "weights" that define such spaces are needed as inputs into the CBC algorithm, and so a natural question is, for a given problem how does one choose the weights? This paper introduces two new CBC algorithms which, given bounds on the mixed first derivatives of the integrand, produce a randomly shifted lattice rule with a guaranteed bound on the root-mean-square error. This alleviates the need for the user to specify the weights. We deal with "product weights" and "product and order dependent (POD) weights". Numerical tables compare the two algorithms under various assumed bounds on the mixed first derivatives, and provide rigorous upper bounds on the root-mean-square integration error. △ Less

Submitted 8 October, 2018; originally announced October 2018.