Showing 1–5 of 5 results for author: Gibson, S M

Gamma Factory at CERN -- novel research tools made of light

Authors: W. Placzek, A. Abramov, S. E. Alden, R. Alemany Fernandez, P. S. Antsiferov, A. Apyan, H. Bartosik, E. G. Bessonov, N. Biancacci, J. Bieron, A. Bogacz, A. Bosco, R. Bruce, D. Budker, K. Cassou, F. Castelli, I. Chaikovska, C. Curatolo, P. Czodrowski, A. Derevianko, K. Dupraz, Y. Dutheil, K. Dzierzega, V. Fedosseev, N. Fuster Martinez , et al. (37 additional authors not shown)

Abstract: We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in… ▽ More We discuss the possibility of creating novel research tools by producing and storing highly relativistic beams of highly ionised atoms in the CERN accelerator complex, and by exciting their atomic degrees of freedom with lasers to produce high-energy photon beams. Intensity of such photon beams would be by several orders of magnitude higher than offered by the presently operating light sources, in the particularly interesting gamma-ray energy domain of 0.1-400 MeV. In this energy range, the high-intensity photon beams can be used to produce secondary beams of polarised electrons, polarised positrons, polarised muons, neutrinos, neutrons and radioactive ions. New research opportunities in a wide domain of fundamental and applied physics can be opened by the Gamma Factory scientific programme based on the above primary and secondary beams. △ Less

Submitted 14 June, 2019; v1 submitted 21 March, 2019; originally announced March 2019.

Comments: 12 pages; presented by W. Placzek at the XXV Cracow Epiphany Conference on Advances in Heavy Ion Physics, 8-11 January 2019, Cracow, Poland

Collimation System

Authors: R. B. Appleby, R. Barlow, A. Bertarelli, R. Bruce, F. Carra, F. Cerutti, L. Esposito, A. Faus-Golfe, H. Garcia Morales, L. Gentini, S. M. Gibson, P. Gradassi, J. M. Jowett, R. Kwee-Hinzmann, L. Lari, A. Lechner, T. Markiewicz, A. Marsili, J. Molson, L. J. Nevay, E. Quaranta, H. Rafique, S. Redaelli, M. Serluca, E. Skordis , et al. (3 additional authors not shown)

Abstract: Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper… ▽ More Chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC. △ Less

Submitted 26 May, 2017; originally announced May 2017.

Comments: 22 pages, chapter 5 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report

Journal ref: CERN Yellow Report CERN 2015-005, pp.109-130

Experimental results of the laserwire emittance scanner for LINAC4 at CERN

Authors: T. Hofmann, G. E. Boorman, A. Bosco, E. Bravin, S. M. Gibson, K. O. Kruchinin, U. Raich, F. Roncarolo, F. Zocca

Abstract: Within the framework of the LHC Injector Upgrade (LIU), the new LINAC4 is currently being commissioned to replace the existing LINAC2 proton source at CERN. After the expected completion at the end of 2016, the LINAC4 will accelerate H- ions to 160 MeV. To measure the transverse emittance of the H- beam, a method based on photo-detachment is proposed. This system will operate using a pulsed laser… ▽ More Within the framework of the LHC Injector Upgrade (LIU), the new LINAC4 is currently being commissioned to replace the existing LINAC2 proton source at CERN. After the expected completion at the end of 2016, the LINAC4 will accelerate H- ions to 160 MeV. To measure the transverse emittance of the H- beam, a method based on photo-detachment is proposed. This system will operate using a pulsed laser with light delivered via an optical fibre and subsequently focused through a thin slice of the H- beam. The laser photons have sufficient energy to detach the outer electron and create H0/e- pairs. In a downstream dipole, the created H0 particles are separated from the unstripped H- ions and their distribution is measured with a dedicated detector. By scanning the focused laser across the H- beam, the transverse emittance of the H- beam can be reconstructed. This paper will first discuss the concept, design and simulations of the laser △ Less

Submitted 18 November, 2015; originally announced November 2015.

Comments: Presented at the International Conference on Laser Applications at Accelerators, LA3NET 2015; Submitted to Nucl. Instr. and Meth. in Phys. Res. section A

Demonstration of a laserwire emittance scanner for the CERN LINAC4 H- Beam

Authors: T. Hofmann, K. O. Kruchinin, A. Bosco, S. M. Gibson, F. Roncarolo, G. Boorman, U. Raich, E. Bravin, J. K. Pozimski, A. Letchford, C. Gabor

Abstract: A non-invasive, compact laserwire system has been developed to measure the transverse emittance of an H- beam and has been demonstrated at the new LINAC4 injector for the LHC at CERN. Light from a low power, pulsed laser source is conveyed via fibre to collide with the H- beam, a fraction of which is neutralized and then intercepted by a downstream diamond detector. Scanning the focused laser acro… ▽ More A non-invasive, compact laserwire system has been developed to measure the transverse emittance of an H- beam and has been demonstrated at the new LINAC4 injector for the LHC at CERN. Light from a low power, pulsed laser source is conveyed via fibre to collide with the H- beam, a fraction of which is neutralized and then intercepted by a downstream diamond detector. Scanning the focused laser across the H- beam and measuring the distribution of the photo-neutralized particles enables the transverse emittance to be reconstructed. The vertical phase-space distribution of a 3 MeV beam during LINAC4 commissioning has been measured by the laserwire and verified with a conventional slit and grid method. △ Less

Submitted 17 November, 2015; v1 submitted 24 August, 2015; originally announced August 2015.

Comments: 10 pages, 13 figures, to be published in Physical Review Special Topics - Accelerators and Beams

Journal ref: Phys. Rev. ST Accel. Beams 18, 122801 (2015)

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

Authors: The ATLAS Collaboration, G. Aad, E. Abat, B. Abbott, J. Abdallah, A. A. Abdelalim, A. Abdesselam, O. Abdinov, B. Abi, M. Abolins, H. Abramowicz, B. S. Acharya, D. L. Adams, T. N. Addy, C. Adorisio, P. Adragna, T. Adye, J. A. Aguilar-Saavedra, M. Aharrouche, S. P. Ahlen, F. Ahles, A. Ahmad, H. Ahmed, G. Aielli, T. Akdogan , et al. (2587 additional authors not shown)

Abstract: A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on… ▽ More A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN. △ Less

Submitted 14 August, 2009; v1 submitted 28 December, 2008; originally announced January 2009.