-
Critical problems of energy frontier Muon Colliders: optics, magnets and radiation
Authors:
Yu. I. Alexahin,
E. Barzi,
E. Gianfelice-Wendt,
V. Kapin,
V. V. Kashikhin,
N. V. Mokhov,
I. Novitski,
V. Shiltsev,
S. Striganov,
I. Tropin,
A. V. Zlobin
Abstract:
This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choic…
▽ More
This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choice, hence the design of the collider optics, magnets and Machine Detector Interface (MDI) are closely intertwined. As a first approximation we use the Interaction Region (IR) design with beta-star=3 mm, whereas for the arcs we re-scale the arc cell design of the 3 TeV MC. Traditional cos-theta coil geometry and Nb3Sn superconductor were used to provide field maps for the analysis and optimization of the arc lattice and IR design, as well as for studies of beam dynamics and magnet protection against radiation. The stress management in the coil will be needed to avoid large degradation or even damage of the brittle SC coils. In the assumed IR designs, the dipoles close to the Interaction Point (IP) and tungsten masks in each IR (to protect magnets) help reducing background particle fluxes in the detector by a substantial factor. The tungsten nozzles in the 6 to 600 cm region from the IP, assisted by the detector solenoid field, trap most of the decay electrons created close to the IP as well as most of the incoherent electron-positron pairs generated in the IP. With sophisticated tungsten, iron, concrete and borated polyethylene shielding in the MDI region, the total reduction of background loads by more than three orders of magnitude can be achieved.
△ Less
Submitted 19 March, 2022;
originally announced March 2022.
-
Solving Critical Problems of the Muon Collider Higgs Factory: Optics, Magnets and their Protection, Detector Backgrounds
Authors:
Yu. Alexahin,
E. Gianfelice-Wendt,
V. Kapin,
V. V. Kashikhin,
N. V. Mokhov,
S. I. Striganov,
I. S. Tropin,
A. V. Zlobin
Abstract:
A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gr…
▽ More
A low-energy medium-luminosity Muon Collider (MC) is being studied as a possible Higgs Factory (HF). Electrons from muon decays will deposit more than 300 kW in superconducting magnets of the HF collider ring. This imposes significant challenges to superconducting (SC) magnets used in the MC storage ring (SR) and interaction regions (IR). Magnet designs are proposed which provide high operating gradient and magnetic field in a large aperture to accommodate the large size of muon beams (due to low beta*), as well as a cooling system to intercept the large heat deposition from the showers induced by decay electrons. The distribution of heat deposition in the MC SR lattice elements requires large-aperture magnets in order to accommodate thick high-Z absorbers to protect the SC coils. Based on the developed MARS15 model and intensive simulations, a sophisticated radiation protection system was designed for the collider SR and IR to bring the peak power density in the superconducting coils below the quench limit and reduce the dynamic heat deposition in the cold mass by a factor of 100. The system consists of tight tungsten masks in the magnet interconnect regions and elliptical tungsten liners in the magnet aperture optimized individually for each magnet. These also reduce the background particle fluxes in the collider detector.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Future Circular Lepton Collider FCC-ee: Overview and Status
Authors:
I. Agapov,
M. Benedikt,
A. Blondel,
M. Boscolo,
O. Brunner,
M. Chamizo Llatas,
T. Charles,
D. Denisov,
W. Fischer,
E. Gianfelice-Wendt,
J. Gutleber,
P. Janot,
M. Koratzinos,
R. Losito,
S. Nagaitsev,
K. Oide,
T. Raubenheimer,
R. Rimmer,
J. Seeman,
D. Shatilov,
V. Shiltsev,
M. Sullivan,
U. Wienands,
F. Zimmermann
Abstract:
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,…
▽ More
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Future Collider Options for the US
Authors:
P. C. Bhat,
S. **dariani,
G. Ambrosio,
G. Apollinari,
S. Belomestnykh,
A. Bross,
J. Butler,
A. Canepa,
D. Elvira,
P. Fox,
Z. Gecse,
E. Gianfelice-Wendt,
P. Merkel,
S. Nagaitsev,
D. Neuffer,
H. Piekarz,
S. Posen,
T. Sen,
V. Shiltsev,
N. Solyak,
D. Stratakis,
M. Syphers,
G. Velev,
V. Yakovlev,
K. Yonehara
, et al. (1 additional authors not shown)
Abstract:
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options…
▽ More
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Introduction to Special Relativity
Authors:
Eliana Gianfelice-Wendt
Abstract:
The goal of this lecture is to introduce the student to the theory of Special Relativity. Not to overload the content with mathematics, the author will stick to the simplest cases; in particular only reference frames using Cartesian coordinates and translating along the common x-axis as in Fig. 1 will be used. The general expressions will be quoted or may be found in the cited literature.
The goal of this lecture is to introduce the student to the theory of Special Relativity. Not to overload the content with mathematics, the author will stick to the simplest cases; in particular only reference frames using Cartesian coordinates and translating along the common x-axis as in Fig. 1 will be used. The general expressions will be quoted or may be found in the cited literature.
△ Less
Submitted 19 January, 2022; v1 submitted 23 August, 2021;
originally announced August 2021.
-
Polarization and Centre-of-mass Energy Calibration at FCC-ee
Authors:
Alain Blondel,
Patrick Janot,
Jörg Wenninger,
Ralf Aßmann,
Sandra Aumon,
Paolo Azzurri,
Desmond P. Barber,
Michael Benedikt,
Anton V. Bogomyagkov,
Eliana Gianfelice-Wendt,
Dima El Kerchen,
Ivan A. Koop,
Mike Koratzinos,
Evgeni Levitchev,
Thibaut Lefevre,
Attilio Milanese,
Nickolai Muchnoi,
Sergey A. Nikitin,
Katsunobu Oide,
Emmanuel Perez,
Robert Rossmanith,
David C. Sagan,
Roberto Tenchini,
Tobias Tydecks,
Dmitry Shatilov
, et al. (3 additional authors not shown)
Abstract:
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm…
▽ More
The first stage of the FCC (Future Circular Collider) is a high-luminosity electron-positron collider (FCC-ee) with centre-of-mass energy ranging from 88 to 365 GeV, to study with high precision the Z, W, Higgs and top particles, with samples of $5 \times 10^{12}$ Z bosons, $10^8$ W pairs, $10^6$ Higgs bosons and $10^6$ top quark pairs. A cornerstone of the physics program lays in the precise (ppm) measurements of the W and Z masses and widths, as well as forward-backward asymmetries. To this effect the centre-of-mass energy distribution should be determined with the high precision. This document describes the capacity offered by FCC-ee, starting with transverse polarization of the beams around the Z pole and the W pair threshold. A running scheme based on regular measurements of the beam energy by resonant depolarization of pilot bunches, during physics data taking, is proposed. The design for polarization wigglers, polarimeter and depolarizer is outlined. The $e^\pm$ beam energies will be monitored with a relative precision of $10^{-6}$. The centre-of-mass energy is derived subject to further corrections, related to the beam acceleration, synchrotron radiation and beamstrahlung; these effects are identified and evaluated. Dimuon events $e^+e^- \to μ^+ μ^-$, recorded in the detectors, provide with great precision the beam crossing angle, the centre-of-mass energy spread, and the $e^+$ and $e^-$ energy difference. Monitoring methods to minimize absolute error and relative uncertainties are discussed. The impact on the physics measurements is given. A programme of further simulations, design, monitoring and R&D is outlined.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
Muon Collider Lattice Concepts
Authors:
Y. Alexahin,
E. Gianfelice-Wendt,
V. Kapin
Abstract:
A Muon Collider poses a number of challenging problems in the lattice design - low beta-star, small circumference, large physical and dynamic aperture - which must be solved in order to realize the unique opportunities it offers for the high-energy physics. This contribution presents basic solutions which make it possible to achieve the goals for both the energy frontier collider and the Higgs fac…
▽ More
A Muon Collider poses a number of challenging problems in the lattice design - low beta-star, small circumference, large physical and dynamic aperture - which must be solved in order to realize the unique opportunities it offers for the high-energy physics. This contribution presents basic solutions which make it possible to achieve the goals for both the energy frontier collider and the Higgs factory with Nb3Sn magnet parameters.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
Investigation of beam self-polarization in the future $e^{+}e^{-}$ circular collider
Authors:
E. Gianfelice-Wendt
Abstract:
The use of resonant depolarization has been suggested for precise beam energy measurements (better than 100 keV) in the $e^{+}e^{-}$ Future Circular Collider (FCC-$e^{+}e^{-}$) for Z and WW physics at 45 and 80 GeV beam energy respectively. Longitudinal beam polarization would benefit the Z peak physics program; however it is not essential and therefore it will be not investigated here. In this pa…
▽ More
The use of resonant depolarization has been suggested for precise beam energy measurements (better than 100 keV) in the $e^{+}e^{-}$ Future Circular Collider (FCC-$e^{+}e^{-}$) for Z and WW physics at 45 and 80 GeV beam energy respectively. Longitudinal beam polarization would benefit the Z peak physics program; however it is not essential and therefore it will be not investigated here. In this paper the possibility of self-polarized leptons is considered. Preliminary results of simulations in presence of quadrupole misalignments and beam position monitors (BPMs) errors for a simplified FCC-$e^{+}e^{-}$ ring are presented.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
FCC-ee: Energy calibration
Authors:
M. Koratzinos,
A. Blondel,
E. Gianfelice-Wendt,
F. Zimmermann
Abstract:
The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due…
▽ More
The FCC-ee aims to improve on electroweak precision measurements, with goals of 100 keV on the Z mass and width, and a fraction of MeV on the W mass. Compared to LEP, this implies a much improved knowledge of the centre-of-mass energy when operating at the Z peak and WW threshold. This can be achieved by making systematic use of resonant depolarization. A number of issues have been identified, due in particular to the long polarization times. However the smaller emittance and energy spread of FCC-ee with respect to LEP should help achieve a much improved performance.
△ Less
Submitted 2 June, 2015;
originally announced June 2015.
-
Progress with the Upgrade of the SPS for the HL-LHC Era
Authors:
B. Goddard,
T. Argyropoulos,
H. Bartosik,
W. Bartmann,
T. Bohl,
F. Caspers,
K. Cornelis,
H. Damerau,
L. Drøsdal,
L. Ducimetière,
R. Garoby,
M. Gourber-Pace,
W. Höfle,
G. Iadarola,
L. Jensen,
V. Kain,
R. Losito,
M. Meddahi,
A. Mereghetti,
V. Mertens,
Ö. Mete,
E. Montesinos,
J. E. Müller,
Y. Papaphilippou,
G. Rumolo
, et al. (6 additional authors not shown)
Abstract:
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in ad…
▽ More
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in addition to the machine studies and simulations performed in 2012. The expected machine performance reach is estimated on the basis of the present knowledge, and the remaining decisions that still need to be made concerning upgrade options are detailed.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Upgrades Of the SPS, Transfer Line and LHC Injection Protection Devices For the HL-LHC Era
Authors:
Ö. Mete,
O. Aberle,
F. Cerutti,
K. Cornelis,
B. Goddard,
V. Kain,
R. Losito,
F. L. Maciariello,
M. Meddahi,
J. Uythoven,
F. M. Velotti,
E. Gianfelice-Wendt,
A. Mereghetti
Abstract:
The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance…
▽ More
The challenging High Luminosity LHC (HL-LHC) beam requirements will lead in the future to unprecedented beam parameters along the LHC injector chain. In the SPS accelerator these requests translate into about a factor two higher intensity and brightness than the present design performance. In addition to the challenge of producing and accelerating such beams, these parameters affect the resistance of the existing equipment against beam impact. Most of the protection devices in the SPS ring, its transfer lines and the LHC injection areas will be put under operational constraints which are beyond their design specification. The equipment concerned has been reviewed and their resistance to the HL-LHC beams checked. Theoretical and simulation studies have been performed for the SPS beam scra** system, the protection devices and the dump absorbers of the SPS-to-LHC transfer lines, as well as for the LHC injection protection devices. The first results of these studies are reported, together with the future prospects.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Proton-proton and electron-positron collider in a 100 km ring at Fermilab
Authors:
C. M. Bhat,
P. C. Bhat,
W. Chou,
E. Gianfelice-Wendt,
J. Lykken,
G. L. Sabbi,
T. Sen,
R. Talman
Abstract:
The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have alread…
▽ More
The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have already found exotic resonances or heavy "partner" particles, this collider could fill out the "tower" of resonances (thus e.g. confirming an extra dimension) or the full suite of partner particles (e.g. for supersymmetry). The high luminosity of the new collider would enable unique precision studies of the Higgs boson (including Higgs self coupling and rare Higgs decays), and its higher energy would allow more complete measurements of vector boson scattering to help elucidate electroweak symmetry breaking. We also discuss an e+e- collider in the same 100 km ring with CM energies from 90 to 350 GeV. This collider would enable precision electroweak measurements up to the ttbar threshold, and serve as a Higgs factory.
△ Less
Submitted 10 June, 2013;
originally announced June 2013.
-
Observation of Instabilities of Coherent Transverse Ocillations in the Fermilab Booster
Authors:
Y. Alexahin,
N. Eddy,
E. Gianfelice-Wendt,
V. Lebedev,
W. Marsh,
W. Pellico,
K. Triplett
Abstract:
The Fermilab Booster - built more than 40 years ago - operates well above the design proton beam intensity of 4x10**12 ppp. Still, the Fermilab neutrino experiments call for even higher intensity of 5.5x10**12 ppp. A multitude of intensity related effects must be overcome in order to meet this goal including suppression of coherent dipole instabilities of transverse oscillations which manifest the…
▽ More
The Fermilab Booster - built more than 40 years ago - operates well above the design proton beam intensity of 4x10**12 ppp. Still, the Fermilab neutrino experiments call for even higher intensity of 5.5x10**12 ppp. A multitude of intensity related effects must be overcome in order to meet this goal including suppression of coherent dipole instabilities of transverse oscillations which manifest themselves as a sudden drop in the beam current. In this report we present the results of observation of these instabilities at different tune, coupling and chromaticity settings and discuss possible cures.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Tune Determination of Strongly Coupled Betatron Oscillations in a Fast-Ram** Synchrotron
Authors:
Y. Alexahin,
E. Gianfelice-Wendt,
W Marsh,
K. Triplett
Abstract:
Tune identification - i.e. attribution of the spectral peak to a particular normal mode of oscillations - can present a significant difficulty in the presence of strong transverse coupling when the normal mode with a lower dam** rate dominates spectra of Turn-by-Turn oscillations in both planes. The introduced earlier phased sum algorithm helped to recover the weaker normal mode signal from the…
▽ More
Tune identification - i.e. attribution of the spectral peak to a particular normal mode of oscillations - can present a significant difficulty in the presence of strong transverse coupling when the normal mode with a lower dam** rate dominates spectra of Turn-by-Turn oscillations in both planes. The introduced earlier phased sum algorithm helped to recover the weaker normal mode signal from the noise, but by itself proved to be insufficient for automatic peak identification in the case of close phase advance distribution in both planes. To resolve this difficulty we modified the algorithm by taking and analyzing Turn-by-Turn data for two different ramps with the beam oscillation excited in each plane in turn. Comparison of the relative amplitudes of Fourier components allows for automatic correct tune identification. The proposed algorithm was implemented in the Fermilab Booster B38 console application and successfully used in tune, coupling and chromaticity measurements.
△ Less
Submitted 30 January, 2013;
originally announced January 2013.
-
High Resolution BPM Upgrade for the ATF Dam** Ring at KEK
Authors:
N. Eddy,
C. Briegel,
B. Fellenz,
E. Gianfelice-Wendt,
P. Prieto,
R. Rechenmacher,
A. Semenov,
D. Voy,
M. Wendt,
D. Zhang,
N. Terunuma,
J. Urakawa
Abstract:
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The techni…
▽ More
A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The technical concept and realization as well as results of beam studies are presented.
△ Less
Submitted 20 September, 2012;
originally announced September 2012.
-
Broad-band chopper for a CW proton linac at Fermilab
Authors:
E. Gianfelice-Wendt,
V. A. Lebedev,
N. Solyak,
S. Nagaitsev,
D. Sun
Abstract:
Requirements and technical limitations to the bunch-by-bunch chopper for the Fermilab Project X are discussed.
Requirements and technical limitations to the bunch-by-bunch chopper for the Fermilab Project X are discussed.
△ Less
Submitted 13 August, 2012;
originally announced August 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Muon collider interaction region design
Authors:
Y. I. Alexahin,
E. Gianfelice-Wendt,
V. V. Kashikhin,
N. V. Mokhov,
A. V. Zlobin,
V. Y. Alexakhin
Abstract:
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlac…
▽ More
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β* < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector components.
△ Less
Submitted 25 April, 2012;
originally announced April 2012.
-
Tune Evaluation From Phased BPM Turn-By-Turn Data
Authors:
Y. Alexahin,
E. Gianfelice-Wendt,
W. Marsh
Abstract:
In fast ram** synchrotrons like the Fermilab Booster the conventional methods of betatron tune evaluation from the turn-by-turn data may not work due to rapid changes of the tunes (sometimes in a course of a few dozens of turns) and a high level of noise. We propose a technique based on phasing of signals from a large number of BPMs which significantly increases the signal to noise ratio. Implem…
▽ More
In fast ram** synchrotrons like the Fermilab Booster the conventional methods of betatron tune evaluation from the turn-by-turn data may not work due to rapid changes of the tunes (sometimes in a course of a few dozens of turns) and a high level of noise. We propose a technique based on phasing of signals from a large number of BPMs which significantly increases the signal to noise ratio. Implementation of the method in the Fermilab Booster control system is described and some measurement results are presented.
△ Less
Submitted 7 February, 2012;
originally announced February 2012.
-
Conceptual design of the muon collider ring lattice
Authors:
Y. Alexahin,
E. Gianfelice-Wendt,
A. Netepenko
Abstract:
Muon collider is a promising candidate for the next energy frontier machine. However, in order to obtain peak luminosity in the 1035/cm2/s range the collider lattice design must satisfy a number of stringent requirements, such as low beta at IP (β* < 1 cm), large momentum acceptance and dynamic aperture and small value of the momentum compaction factor. Here we present a particular solution for th…
▽ More
Muon collider is a promising candidate for the next energy frontier machine. However, in order to obtain peak luminosity in the 1035/cm2/s range the collider lattice design must satisfy a number of stringent requirements, such as low beta at IP (β* < 1 cm), large momentum acceptance and dynamic aperture and small value of the momentum compaction factor. Here we present a particular solution for the interaction region optics whose distinctive feature is a three-sextupole local chromatic correction scheme. Together with a new flexible momentum compaction arc cell design this scheme allows to satisfy all the above-mentioned requirements and is relatively insensitive to the beam-beam effect.
△ Less
Submitted 1 February, 2012;
originally announced February 2012.
-
Muon collider interaction region design
Authors:
Y. I. Alexahin,
E. Gianfelice-Wendt,
V. V. Kashikhin,
N. V. Mokhov,
A. V. Zlobin,
V. Y. Alexakhin
Abstract:
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interla…
▽ More
Design of a muon collider interaction region (IR) presents a number of challenges arising from low β * < 1 cm, correspondingly large beta-function values and beam sizes at IR magnets, as well as the necessity to protect superconducting magnets and collider detectors from muon decay products. As a consequence, the designs of the IR optics, magnets and machine-detector interface are strongly interlaced and iterative. A consistent solution for the 1.5 TeV c.o.m. muon collider IR is presented. It can provide an average luminosity of 1034 cm-2s-1 with an adequate protection of magnet and detector components.
△ Less
Submitted 1 February, 2012;
originally announced February 2012.
