Showing 1–11 of 11 results for author: Ghys, L

Charge radii, moments and masses of mercury isotopes across the N = 126 shell closure

Authors: T. Day Goodacre, A. V. Afanasjev, A. E. Barzakh, L. Nies, B. A. Marsh, S. Sels, U. C. Perera, P. Ring, F. Wienholtz, A. N. Andreyev, P. Van Duppen, N. A. Althubiti, B. Andel, D. Atanasov, R. S. Augusto, J. Billowes, K. Blaum, T. E. Cocolios, J. G. Cubiss, G. J. Farooq-Smith, D. V. Fedorov, V. N. Fedosseev, K. T. Flanagan, L. P. Gaffney, L. Ghys , et al. (26 additional authors not shown)

Abstract: Combining laser spectroscopy in a Versatile Arc Discharge and Laser Ion Source, with Penning-trap mass spectrometry at the CERN-ISOLDE facility, this work reports on mean-square charge radii of neutron-rich mercury isotopes across the $N = 126$ shell closure, the electromagnetic moments of $^{207}$Hg and more precise mass values of $^{206-208}$Hg. The odd-even staggering (OES) of the mean square c… ▽ More Combining laser spectroscopy in a Versatile Arc Discharge and Laser Ion Source, with Penning-trap mass spectrometry at the CERN-ISOLDE facility, this work reports on mean-square charge radii of neutron-rich mercury isotopes across the $N = 126$ shell closure, the electromagnetic moments of $^{207}$Hg and more precise mass values of $^{206-208}$Hg. The odd-even staggering (OES) of the mean square charge radii and the kink at $N = 126$ are analyzed within the framework of covariant density functional theory (CDFT), with comparisons between different functionals to investigate the dependence of the results on the underlying single-particle structure. The observed features are defined predominantly in the particle-hole channel in CDFT, since both are present in the calculations without pairing. However, the magnitude of the kink is still affected by the occupation of the $1i_{11/2}$ and $2g_{9/2}$ orbitals with a dependence on the relative energies as well as pairing. △ Less

Submitted 19 November, 2021; originally announced November 2021.

Comments: 20 pages, 12 figures, Phys. Rev. C in press

Journal ref: Physical Review C 104, 054322 (2021)

Laser spectroscopy of neutron-rich $^{207,208}$Hg isotopes: Illuminating the kink and odd-even staggering in charge radii across the $N=126$ shell closure

Authors: T. Day Goodacre, A. V. Afanasjev, A. E. Barzakh, B. A. Marsh, S. Sels, P. Ring, H. Nakada, A. N. Andreyev, P. Van Duppen, N. A. Althubiti, B. Andel, D. Atanasov, J. Billowes, K. Blaum, T. E. Cocolios, J. G. Cubiss, G. J. Farooq-Smith, D. V. Fedorov, V. N. Fedosseev, K. T. Flanagan, L. P. Ganey, L. Ghys, M. Huyse, S. Kreim, D. Lunney , et al. (19 additional authors not shown)

Abstract: The mean-square charge radii of $^{207,208}$Hg ($Z=80, N=127,128$) have been studied for the first time and those of $^{202,203,206}$Hg ($N=122,123,126$) remeasured by the application of in-source resonance-ionization laser spectroscopy at ISOLDE (CERN). The characteristic \textit{kink} in the charge radii at the $N=126$ neutron shell closure has been revealed, providing the first information on i… ▽ More The mean-square charge radii of $^{207,208}$Hg ($Z=80, N=127,128$) have been studied for the first time and those of $^{202,203,206}$Hg ($N=122,123,126$) remeasured by the application of in-source resonance-ionization laser spectroscopy at ISOLDE (CERN). The characteristic \textit{kink} in the charge radii at the $N=126$ neutron shell closure has been revealed, providing the first information on its behavior below the $Z=82$ proton shell closure. A theoretical analysis has been performed within relativistic Hartree-Bogoliubov and non-relativistic Hartree-Fock-Bogoliubov approaches, considering both the new mercury results and existing lead data. Contrary to previous interpretations, it is demonstrated that both the kink at $N=126$ and the odd-even staggering (OES) in its vicinity can be described predominately at the mean-field level, and that pairing does not need to play a crucial role in their origin. A new OES mechanism is suggested, related to the staggering in the occupation of the different neutron orbitals in odd- and even-$A$ nuclei, facilitated by particle-vibration coupling for odd-$A$ nuclei. △ Less

Submitted 26 December, 2020; originally announced December 2020.

Comments: 7 pages, 5 figures, Physical Review C, in press

Journal ref: Physical Review Letters 126, 032502 (2021)

SoLid: A short baseline reactor neutrino experiment

Authors: SoLid Collaboration, Y. Abreu, Y. Amhis, L. Arnold, G. Barber, W. Beaumont, S. Binet, I. Bolognino, M. Bongrand, J. Borg, D. Boursette, V. Buridon, B. C. Castle, H. Chanal, K. Clark, B. Coupe, P. Crochet, D. Cussans, A. De Roeck, D. Durand, T. Durkin, M. Fallot, L. Ghys, L. Giot, K. Graves , et al. (37 additional authors not shown)

Abstract: The SoLid experiment, short for Search for Oscillations with a Lithium-6 detector, is a new generation neutrino experiment which tries to address the key challenges for high precision reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino en… ▽ More The SoLid experiment, short for Search for Oscillations with a Lithium-6 detector, is a new generation neutrino experiment which tries to address the key challenges for high precision reactor neutrino measurements at very short distances from a reactor core and with little or no overburden. The primary goal of the SoLid experiment is to perform a precise measurement of the electron antineutrino energy spectrum and flux and to search for very short distance neutrino oscillations as a probe of eV-scale sterile neutrinos. This paper describes the SoLid detection principle, the mechanical design and the construction of the detector. It then reports on the installation and commissioning on site near the BR2 reactor, Belgium, and finally highlights its performance in terms of detector response and calibration. △ Less

Submitted 15 December, 2020; v1 submitted 14 February, 2020; originally announced February 2020.

Comments: 39 pages, 30 figures

Shape staggering of mid-shell mercury isotopes from in-source laser spectroscopy compared with Density Functional Theory and Monte Carlo Shell Model calculations

Authors: S. Sels, T. Day Goodacre, B. A. Marsh, A. Pastore, W. Ryssens, Y. Tsunoda, N. Althubiti, B. Andel, A. N. Andreyev, D. Atanasov, A. E. Barzakh, M. Bender, J. Billowes, K. Blaum, T. E. Cocolios, J. G. Cubiss, J. Dobaczewski, G. J. Farooq-Smith, D. V. Fedorov, V. N. Fedosseev, K. T. Flanagan, L. P. Gaffney, L. Ghys, P-H. Heenen, M. Huyse , et al. (23 additional authors not shown)

Abstract: Neutron-deficient $^{177-185}$Hg isotopes were studied using in-source laser resonance-ionization spectroscopy at the CERN-ISOLDE radioactive ion-beam facility, in an experiment combining different detection methods tailored to the studied isotopes. These include either alpha-decay tagging or Multi-reflection Time-of-Flight gating to identify the isotopes of interest. The endpoint of the odd-even… ▽ More Neutron-deficient $^{177-185}$Hg isotopes were studied using in-source laser resonance-ionization spectroscopy at the CERN-ISOLDE radioactive ion-beam facility, in an experiment combining different detection methods tailored to the studied isotopes. These include either alpha-decay tagging or Multi-reflection Time-of-Flight gating to identify the isotopes of interest. The endpoint of the odd-even nuclear shape staggering in mercury was observed directly by measuring for the first time the isotope shifts and hyperfine structures of $^{177-180}$Hg. Changes in the mean-square charge radii for all mentioned isotopes, magnetic dipole and electric quadrupole moments of the odd-A isotopes and arguments in favor of $I = 7/2$ spin assignment for $^{177,179}$Hg were deduced. Experimental results are compared with Density Functional Theory (DFT) and Monte-Carlo Shell Model (MCSM) calculations. DFT calculations with several Skyrme parameterizations predict a large jump in the charge radius around the neutron $N = 104$ mid shell, with an odd-even staggering pattern related to the coexistence of nearly-degenerate oblate and prolate minima. This near-degeneracy is highly sensitive to many aspects of the effective interaction, a fact that renders perfect agreement with experiment out of reach for current functionals. Despite this inherent diffculty, the SLy5s1 and a modified UNEDF1^{SO} parameterization predict a qualitatively correct staggering that is off by two neutron numbers. MCSM calculations of states with the experimental spins and parities show good agreement for both electromagnetic moments and the observed charge radii. A clear mechanism for the origin of shape staggering within this context is identified: a substantial change in occupancy of the proton $πh_{9/2}$ and neutron $νi_{13/2}$ orbitals. △ Less

Submitted 28 February, 2019; originally announced February 2019.

Comments: 19 pages, 18 figures

Commissioning and Operation of the Readout System for the SoLid Neutrino Detector

Authors: Y. Abreu, Y. Amhis, G. Ban, W. Beaumont, S. Binet, M. Bongrand, D. Boursette, B. C. Castle, H. Chanal, K. Clark, B. Coupé, P. Crochet, D. Cussans, A. De Roeck, D. Durand, M. Fallot, L. Ghys, L. Giot, K. Graves, B. Guillon, D. Henaff, B. Hosseini, S. Ihantola, S. Jenzer, S. Kalcheva , et al. (31 additional authors not shown)

Abstract: The SoLid experiment aims to measure neutrino oscillation at a baseline of 6.4 m from the BR2 nuclear reactor in Belgium. Anti-neutrinos interact via inverse beta decay (IBD), resulting in a positron and neutron signal that are correlated in time and space. The detector operates in a surface building, with modest shielding, and relies on extremely efficient online rejection of backgrounds in order… ▽ More The SoLid experiment aims to measure neutrino oscillation at a baseline of 6.4 m from the BR2 nuclear reactor in Belgium. Anti-neutrinos interact via inverse beta decay (IBD), resulting in a positron and neutron signal that are correlated in time and space. The detector operates in a surface building, with modest shielding, and relies on extremely efficient online rejection of backgrounds in order to identify these interactions. A novel detector design has been developed using 12800 5 cm cubes for high segmentation. Each cube is formed of a sandwich of two scintillators, PVT and 6LiF:ZnS(Ag), allowing the detection and identification of positrons and neutrons respectively. The active volume of the detector is an array of cubes measuring 80x80x250 cm (corresponding to a fiducial mass of 1.6 T), which is read out in layers using two dimensional arrays of wavelength shifting fibres and silicon photomultipliers, for a total of 3200 readout channels. Signals are recorded with 14 bit resolution, and at 40 MHz sampling frequency, for a total raw data rate of over 2 Tbit/s. In this paper, we describe a novel readout and trigger system built for the experiment, that satisfies requirements on: compactness, low power, high performance, and very low cost per channel. The system uses a combination of high price-performance FPGAs with a gigabit Ethernet based readout system, and its total power consumption is under 1 kW. The use of zero suppression techniques, combined with pulse shape discrimination trigger algorithms to detect neutrons, results in an online data reduction factor of around 10000. The neutron trigger is combined with a large per-channel history time buffer, allowing for unbiased positron detection. The system was commissioned in late 2017, with successful physics data taking established in early 2018. △ Less

Submitted 31 August, 2019; v1 submitted 13 December, 2018; originally announced December 2018.

Journal ref: JINST 14 (2019) no.11, P11003

Development of a Quality Assurance Process for the SoLid Experiment

Authors: Y. Abreu, Y. Amhis, G. Ban, W. Beaumont, S. Binet, M. Bongrand, D. Boursette, B. C. Castle, H. Chanal, K. Clark, B. Coupé, P. Crochet, D. Cussans, A. De Roeck, D. Durand, M. Fallot, L. Ghys, L. Giot, K. Graves, B. Guillon, D. Henaff, B. Hosseini, S. Ihantola, S. Jenzer, S. Kalcheva , et al. (31 additional authors not shown)

Abstract: The SoLid experiment has been designed to search for an oscillation pattern induced by a light sterile neutrino state, utilising the BR2 reactor of SCK$\bullet$CEN, in Belgium. The detector leverages a new hybrid technology, utilising two distinct scintillators in a cubic array, creating a highly segmented detector volume. A combination of 5 cm cubic polyvinyltoluene cells, with $^6$LiF:ZnS(Ag) sh… ▽ More The SoLid experiment has been designed to search for an oscillation pattern induced by a light sterile neutrino state, utilising the BR2 reactor of SCK$\bullet$CEN, in Belgium. The detector leverages a new hybrid technology, utilising two distinct scintillators in a cubic array, creating a highly segmented detector volume. A combination of 5 cm cubic polyvinyltoluene cells, with $^6$LiF:ZnS(Ag) sheets on two faces of each cube, facilitate reconstruction of the neutrino signals. % The polyvinyltoluene scintillator is used as an $\overlineν_e$ target for the inverse beta decay of ($\overlineν_e + p \rightarrow e^{+}+n$), with the $^6$LiF:ZnS(Ag) sheets used for associated neutron detection. Scintillation signals are read out by a network of wavelength shifting fibres connected to multipixel photon counters. Whilst the high granularity provides a powerful toolset to discriminate backgrounds; by itself the segmentation also represents a challenge in terms of homogeneity and calibration, for a consistent detector response. The search for this light sterile neutrino implies a sensitivity to distortions of around $\mathcal{O}$(10)\% in the energy spectrum of reactor $\overlineν_e$. Hence, a very good neutron detection efficiency, light yield and homogeneous detector response are critical for data validation. The minimal requirements for the SoLid physics program are a light yield and a neutron detection efficiency larger than 40 PA/MeV/cube and 50 \% respectively. In order to guarantee these minimal requirements, the collaboration developed a rigorous quality assurance process for all 12800 cubic cells of the detector. To carry out the quality assurance process, an automated calibration system called CALIPSO was designed and constructed. △ Less

Submitted 20 December, 2018; v1 submitted 13 November, 2018; originally announced November 2018.

Comments: Submitted to JINST

Journal ref: JINST 14 (2019) no.02, P02014

Optimisation of the scintillation light collection and uniformity for the SoLid experiment

Authors: Y. Abreu, Y. Amhis, W. Beaumont, M. Bongrand, D. Boursette, B. C. Castle, K. Clark, B. Coupé, D. Cussans, A. De Roeck, D. Durand, M. Fallot, L. Ghys, L. Giot, K. Graves, B. Guillon, D. Henaff, B. Hosseini, S. Ihantola, S. Jenzer, S. Kalcheva, L. N. Kalousis, M. Labare, G. Lehaut, S. Manley , et al. (26 additional authors not shown)

Abstract: This paper presents a comprehensive optimisation study to maximise the light collection efficiency of scintillating cube elements used in the SoLid detector. Very short baseline reactor experiments, like SoLid, look for active to sterile neutrino oscillation signatures in the anti-neutrino energy spectrum as a function of the distance to the core and energy. Performing a precise search requires hi… ▽ More This paper presents a comprehensive optimisation study to maximise the light collection efficiency of scintillating cube elements used in the SoLid detector. Very short baseline reactor experiments, like SoLid, look for active to sterile neutrino oscillation signatures in the anti-neutrino energy spectrum as a function of the distance to the core and energy. Performing a precise search requires high light yield of the scintillating elements and uniformity of the response in the detector volume. The SoLid experiment uses an innovative hybrid technology with two different scintillators: polyvinyltoluene scintillator cubes and $^6$LiF:ZnS(Ag) screens. A precision test bench based on a $^{207}$Bi calibration source has been developed to study improvements on the energy resolution and uniformity of the prompt scintillation signal of antineutrino interactions. A trigger system selecting the 1~MeV conversion electrons provides a Gaussian energy peak and allows for precise comparisons of the different detector configurations that were considered to improve the SoLid detector light collection. The light collection efficiency is influenced by the choice of wrap** material, the position of the $^6$LiF:ZnS(Ag) screen, the type of fibre, the number of optical fibres and the type of mirror at the end of the fibre. This study shows that large gains in light collection efficiency are possible compared to the SoLid SM1 prototype. The light yield for the SoLid detector is expected to be at least 52$\pm$2 photo-avalanches per MeV per cube, with a relative non-uniformity of 6 %, demonstrating that the required energy resolution of at least 14 % at 1 MeV can be achieved. △ Less

Submitted 7 September, 2018; v1 submitted 6 June, 2018; originally announced June 2018.

Comments: 25 pages, 19 figures, published in JINST 2018_JINST_13_P09005

Performance of a full scale prototype detector at the BR2 reactor for the SoLid experiment

Authors: Y. Abreu, Y. Amhis, L. Arnold, G. Ban, W. Beaumont, M. Bongrand, D. Boursette, B. C. Castle, K. Clark, B. Coupé, D. Cussans, A. De Roeck, J. D'Hondt, D. Durand, M. Fallot, L. Ghys, L. Giot, B. Guillon, S. Ihantola, X. Janssen, S. Kalcheva, L. N. Kalousis, E. Koonen, M. Labare, G. Lehaut , et al. (26 additional authors not shown)

Abstract: The SoLid collaboration has developed a new detector technology to detect electron anti-neutrinos at close proximity to the Belgian BR2 reactor at surface level. A 288$\,$kg prototype detector was deployed in 2015 and collected data during the operational period of the reactor and during reactor shut-down. Dedicated calibration campaigns were also performed with gamma and neutron sources. This p… ▽ More The SoLid collaboration has developed a new detector technology to detect electron anti-neutrinos at close proximity to the Belgian BR2 reactor at surface level. A 288$\,$kg prototype detector was deployed in 2015 and collected data during the operational period of the reactor and during reactor shut-down. Dedicated calibration campaigns were also performed with gamma and neutron sources. This paper describes the construction of the prototype detector with a high control on its proton content and the stability of its operation over a period of several months after deployment at the BR2 reactor site. All detector cells provide sufficient light yields to achieve a target energy resolution of better than 20%/$\sqrt{E(MeV)}$. The capability of the detector to track muons is exploited to equalize the light response of a large number of channels to a precision of 3% and to demonstrate the stability of the energy scale over time. Particle identification based on pulse-shape discrimination is demonstrated with calibration sources. Despite a lower neutron detection efficiency due to triggering constraints, the main backgrounds at the reactor site were determined and taken into account in the shielding strategy for the main experiment. The results obtained with this prototype proved essential in the design optimization of the final detector. This paper is dedicated to our SCK$\cdot$CEN colleague, Edgar Koonen, who passed away unexpectedly in 2017. Edgar was part of the SoLid collaboration since its inception and his efforts were vital to get the experiment started. He will be duly missed. △ Less

Submitted 12 April, 2018; v1 submitted 8 February, 2018; originally announced February 2018.

Comments: 29 pages, 23 figures, submitted to JINST

A novel segmented-scintillator antineutrino detector

Authors: Y. Abreu, Y. Amhis, L. Arnold, G. Ban, W. Beaumont, M. Bongrand, D. Boursette, J. M. Buhour, B. C. Castle, K. Clark, B. Coupé, A. S. Cucoanes, D. Cussans, A. De Roeck, J. DHondt, D. Durand, M. Fallot, S. Fresneau, L. Ghys, L. Giot, B. Guillon, G. Guilloux, S. Ihantola, X. Janssen, S. Kalcheva , et al. (31 additional authors not shown)

Abstract: The next generation of very-short-baseline reactor experiments will require compact detectors operating at surface level and close to a nuclear reactor. This paper presents a new detector concept based on a composite solid scintillator technology. The detector target uses cubes of polyvinyltoluene interleaved with $^6$LiF:ZnS(Ag) phosphor screens to detect the products of the inverse beta decay re… ▽ More The next generation of very-short-baseline reactor experiments will require compact detectors operating at surface level and close to a nuclear reactor. This paper presents a new detector concept based on a composite solid scintillator technology. The detector target uses cubes of polyvinyltoluene interleaved with $^6$LiF:ZnS(Ag) phosphor screens to detect the products of the inverse beta decay reaction. A multi-tonne detector system built from these individual cells can provide precise localisation of scintillation signals, making efficient use of the detector volume. Monte Carlo simulations indicate that a neutron capture efficiency of over 70% is achievable with a sufficient number of $^6$LiF:ZnS(Ag) screens per cube and that an appropriate segmentation enables a measurement of the positron energy which is not limited by gamma-ray leakage. First measurements of a single cell indicate that a very good neutron-gamma discrimination and high neutron detection efficiency can be obtained with adequate triggering techniques. The light yield from positron signals has been measured, showing that an energy resolution of 14%/$\sqrt{E({\mathrm{MeV}})}$ is achievable with high uniformity. A preliminary neutrino signal analysis has been developed, using selection criteria for pulse shape, energy, time structure and energy spatial distribution and showing that an antineutrino efficiency of 40% can be achieved. It also shows that the fine segmentation of the detector can be used to significantly decrease both correlated and accidental backgrounds. △ Less

Submitted 31 May, 2017; v1 submitted 5 March, 2017; originally announced March 2017.

Comments: 17 pages, 15 figures, submitted to JINST

Analytical model for release calculations in solid thin-foils ISOL targets

Authors: Luca Egoriti, Stef Boeckx, Lars Ghys, Donald Houngbo, Lucia Popescu

Abstract: A detailed analytical model has been developed to simulate isotope-release curves from thin-foils ISOL targets. It involves the separate modelling of diffusion and effusion inside the target. The former has been modelled using both first and second Fick's law. The latter, effusion from the surface of the target material to the end of the ionizer, was simulated with the Monte Carlo code MolFlow+. T… ▽ More A detailed analytical model has been developed to simulate isotope-release curves from thin-foils ISOL targets. It involves the separate modelling of diffusion and effusion inside the target. The former has been modelled using both first and second Fick's law. The latter, effusion from the surface of the target material to the end of the ionizer, was simulated with the Monte Carlo code MolFlow+. The calculated delay-time distribution for this process was then fitted using a double-exponential function. The release curve obtained from the convolution of diffusion and effusion shows good agreement with experimental data from two different target geometries used at ISOLDE. Moreover, the experimental yields are well reproduced when combining the release fraction with calculated in-target production. △ Less

Submitted 21 June, 2016; originally announced June 2016.

Comments: accepted for publication in Nuclear Inst. and Methods in Physics Research A

Empirical description of beta-delayed fission partial half-lives

Authors: L. Ghys, AN. Andreyev, S. Antalic, M. Huyse, P. Van Duppen

Abstract: Background: The process of beta-delayed fission (bDF) provides a versatile tool to study low-energy fission in nuclei far away from the beta-stability line, especially for nuclei which do not fission spontaneously. Purpose: The aim of this paper is to investigate systematic trends in bDF partial half-lives. Method: A semi-phenomenological framework was developed to systematically account for the b… ▽ More Background: The process of beta-delayed fission (bDF) provides a versatile tool to study low-energy fission in nuclei far away from the beta-stability line, especially for nuclei which do not fission spontaneously. Purpose: The aim of this paper is to investigate systematic trends in bDF partial half-lives. Method: A semi-phenomenological framework was developed to systematically account for the behavior of bDF partial half-lives. Results: The bDF partial half-life appears to exponentially depend on the difference between the Q value for beta decay of the parent nucleus and the fission-barrier energy of the daughter (after beta decay) product. Such dependence was found to arise naturally from some simple theoretical considerations. Conclusions: This systematic trend was confirmed for experimental bDF partial half-lives spanning over 7 orders of magnitudes when using fission barriers calculated from either the Thomas-Fermi or the liquid-drop fission model. The same dependence was also observed, although less pronounced, when comparing to fission barriers from the finite-range liquid-drop model or the Thomas-Fermi plus Strutinsky Integral method. △ Less

Submitted 14 April, 2015; originally announced April 2015.

Comments: accepted for publication in Phys. Rev. C