-
Angular Momentum Loss Rates in Be Stars Determined by the Viscous Decretion Disc Model
Authors:
M. R. Ghoreyshi,
C. E. Jones,
A. Granada
Abstract:
Circumstellar discs around Be stars are formed by the material ejected by the central star. This process removes excess angular momentum from the star as viscosity facilitates the mass and angular momentum transfer within the disc and its growth. The angular momentum loss rates (AMLR) of Be stars is a subject of debate in the literature. Through the modelling of the disc formation and dissipation…
▽ More
Circumstellar discs around Be stars are formed by the material ejected by the central star. This process removes excess angular momentum from the star as viscosity facilitates the mass and angular momentum transfer within the disc and its growth. The angular momentum loss rates (AMLR) of Be stars is a subject of debate in the literature. Through the modelling of the disc formation and dissipation phases observed from Be stars, their average AMLR can be determined and this is the goal of this work. We use the viscous decretion disc (VDD) model to provide a range of the average AMLR for Be stars and compare these rates with predicted values from the literature. We explore the reasons for discrepancies between the predicted values of average AMLR using the VDD and Geneva stellar evolution (GSE) models that were previously reported in literature and find that the largest differences occur when Be stars are rotating below their critical speeds. We show that the time over which the mass reservoir builds up is inversely proportional to the average AMLR. Also, we determine a revised value of the average AMLR for the Galactic Be star omega CMa of 4.7x10^36 g cm^2/s^2, which is in better agreement with the values expected for a typical B2 type star. Finally, the effect of disc truncation due to the presence of a companion star is investigated and we find that this has a minimal effect on the average AMLR.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
The Be Star 66 Ophiuchi: 60 Years of Disk Evolution
Authors:
Keegan C. Marr,
Carol E. Jones,
Alex C. Carciofi,
Amanda C. Rubio,
Bruno C. Mota,
Mohammad R. Ghoreyshi,
Daniel W. Hatfield,
Leandro R. Rímulo
Abstract:
We use a time-dependent hydrodynamic code and a non-LTE Monte Carlo code to model disk dissipation for the Be star 66 Ophiuchi. We compiled 63 years of observations from 1957 to 2020 to encompass the complete history of the growth and subsequent dissipation of the star's disk. Our models are constrained by new and archival photometry, spectroscopy and polarization observations, allowing us to mode…
▽ More
We use a time-dependent hydrodynamic code and a non-LTE Monte Carlo code to model disk dissipation for the Be star 66 Ophiuchi. We compiled 63 years of observations from 1957 to 2020 to encompass the complete history of the growth and subsequent dissipation of the star's disk. Our models are constrained by new and archival photometry, spectroscopy and polarization observations, allowing us to model the disk dissipation event. Using Markov chain Monte Carlo methods, we find 66 Oph is consistent with standard B2Ve stellar properties. We computed a grid of 61568 Be star disk models to constrain the density profile of the disk before dissipation using observations of the H$α$ line profile and SED. We find at the onset of dissipation the disk has a base density of $2.5\times10^{-11}\ \rm{g\ cm^{-3}}$ with a radial power-law index of $n=2.6$. Our models indicate that after 21 years of disk dissipation 66 Oph's outer disk remained present and bright in the radio. We find an isothermal disk with constant viscosity with an $α= 0.4$ and an outer disk radius of $\sim$115 stellar radii best reproduces the rate of 66 Oph's disk dissipation. We determined the interstellar polarization in the direction of the star in the V-band is $p=0.63 \pm 0.02\%$ with a polarization position angle of $θ_{IS}\approx85.7 \pm 0.7^\circ$. Using the Stokes QU diagram, we find the intrinsic polarization position angle of 66 Oph's disk is $θ_{int}\approx98 \pm 3^\circ$.
△ Less
Submitted 22 April, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
A Multi-observing-technique Study of the Dynamical Evolution of the Viscous Disk around the Be Star $ω$ CMa
Authors:
Mohammad R. Ghoreyshi,
Alex C. Carciofi,
Carol E. Jones,
Daniel M. Faes,
Dietrich Baade,
Thomas Rivinius
Abstract:
The observed emission lines of Be stars originate from a circumstellar Keplerian disk that are generally well explained by the Viscous Decretion Disk model. In an earlier work we performed the modeling of the full light curve of the bright Be star $ω$ CMa (Ghoreyshi et al. 2018) with the 1-D time-dependent hydrodynamics code SINGLEBE and the Monte Carlo radiative-transfer code HDUST.
We used the…
▽ More
The observed emission lines of Be stars originate from a circumstellar Keplerian disk that are generally well explained by the Viscous Decretion Disk model. In an earlier work we performed the modeling of the full light curve of the bright Be star $ω$ CMa (Ghoreyshi et al. 2018) with the 1-D time-dependent hydrodynamics code SINGLEBE and the Monte Carlo radiative-transfer code HDUST.
We used the V -band light curve that probes the inner disk through four disk formation and dissipation cycles. This new study compares predictions of the same set of model parameters with time-resolved photometry from the near UV through the mid-infrared, comprehensive series of optical spectra, and optical broad-band polarimetry, that overall represent a larger volume of the disk. Qualitatively, the models reproduce the trends in the observed data due to the growth and decay of the disk. However, quantitative differences exist, e.g., an overprediction of the flux increasing with wavelength, too slow decreases in Balmer emission-line strength that are too slow during disk dissipation, and the discrepancy between the range of polarimetric data and the model. We find that a larger value of the viscosity parameter alone, or a truncated disk by a companion star, reduces these discrepancies by increasing the dissipation rate in the outer regions of the disk.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
A Multi-technique Study of the Dynamical Evolution of the Viscous Disk around the Be Star ω CMa
Authors:
Mohammad Reza Ghoreyshi
Abstract:
There is an increasing body of evidence that suggests that Be disks are well described by the Viscous Decretion Disk (VDD) model according to which the formation and structure of the disk depend on the kinematic viscosity of the gas. However, most observational tests of the VDD to-date were done for systems that do not display strong temporal variability. From this analysis we (1) obtain a realist…
▽ More
There is an increasing body of evidence that suggests that Be disks are well described by the Viscous Decretion Disk (VDD) model according to which the formation and structure of the disk depend on the kinematic viscosity of the gas. However, most observational tests of the VDD to-date were done for systems that do not display strong temporal variability. From this analysis we (1) obtain a realistic physical model of the circumstellar environment; (2) measure the viscosity parameter of the gas, both during the formation and dissipation phases of the disk; (3) obtain a reliable estimate of the stellar mass and angular momentum loss rates during outburst. Our simulations suggests that the VDD model adequately describes the structural evolution of the disk. Furthermore, our analysis allowed us to determine the viscosity parameter a, as well as the net mass and angular momentum (AM) loss rates. We find that a is variable, ranging from 0.1 to 1.0, not only from cycle to cycle but also within a given cycle. Additionally, build-up phases have larger values of a than the dissipation phases. We also find that, contrary to what is generally assumed, during dissipation the outward AM flux is not necessarily zero, meaning that ω CMa does not experience a true quiescence but, instead, switches between a high AM loss rate state to a low AM loss rate one during which the disk quickly assumes an overall lower density but never zero. We confront the average AM loss rate with predictions from stellar evolution models for fast-rotating stars, and find that our measurements are smaller by more than one order of magnitude. The model developed using the V-band photometry as a constraint was applied to several other observables. Overall, the results of this multi-technique study were very positive, with a good match for multi-band photometry, polarization, and most spectroscopic characteristics.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
The life cycles of Be viscous decretion discs: The case of ω CMa
Authors:
M. R. Ghoreyshi,
A. C. Carciofi,
L. R. Rimulo,
R. G. Vieira,
D. M. Faes,
D. Baade,
J. E. Bjorkman,
S. Otero,
Th. Rivinius
Abstract:
We analyzed V-band photometry of the Be star ω CMa, obtained during the last four decades, during which the star went through four complete cycles of disc formation and dissipation. The data were simulated by hydrodynamic models based on a time-dependent implementation of the viscous decretion disc (VDD) paradigm, in which a disc around a fast-spinning Be star is formed by material ejected by the…
▽ More
We analyzed V-band photometry of the Be star ω CMa, obtained during the last four decades, during which the star went through four complete cycles of disc formation and dissipation. The data were simulated by hydrodynamic models based on a time-dependent implementation of the viscous decretion disc (VDD) paradigm, in which a disc around a fast-spinning Be star is formed by material ejected by the star and driven to progressively larger orbits by means of viscous torques. Our simulations offer a good description of the photometric variability during phases of disc formation and dissipation, which suggests that the VDD model adequately describes the structural evolution of the disc. Furthermore, our analysis allowed us to determine the viscosity parameter α, as well as the net mass and angular momentum (AM) loss rates. We find that α is variable, ranging from 0.1 to 1.0, not only from cycle to cycle but also within a given cycle. Additionally, build-up phases usually have larger values of α than the dissipation phases. Furthermore, during dissipation the outward AM flux is not necessarily zero, meaning that ω CMa does not experience a true quiescence but, instead, switches between a high to a low AM loss rate during which the disc quickly assumes an overall lower density but never zero. We confront the average AM loss rate with predictions from stellar evolution models for fast-rotating stars, and find that our measurements are smaller by more than one order of magnitude.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
The life cycles of Be viscous decretion discs: fundamental disc parameters of 54 SMC Be stars
Authors:
Leandro Rocha Rímulo,
Alex Cavaliéri Carciofi,
Rodrigo Georgetti Vieira,
Thomas Rivinius,
Daniel Moser Faes,
André Luiz Figueiredo,
Jon Eric Bjorkman,
Cyril Georgy,
Mohammad Reza Ghoreyshi,
Igor Soszyński
Abstract:
Be stars are main-sequence massive stars with emission features in their spectrum, which originates in circumstellar gaseous discs. Even though the viscous decretion disc (VDD) model can satisfactorily explain most observations, two important physical ingredients, namely the magnitude of the viscosity ($α$) and the disk mass injection rate, remain poorly constrained. The light curves of Be stars t…
▽ More
Be stars are main-sequence massive stars with emission features in their spectrum, which originates in circumstellar gaseous discs. Even though the viscous decretion disc (VDD) model can satisfactorily explain most observations, two important physical ingredients, namely the magnitude of the viscosity ($α$) and the disk mass injection rate, remain poorly constrained. The light curves of Be stars that undergo events of disc formation and dissipation offer an opportunity to constrain these quantities. A pipeline was developed to model these events that uses a grid of synthetic light curves, computed from coupled hydrodynamic and radiative transfer calculations. A sample of 54 Be stars from the OGLE survey of the Small Magellanic Cloud (SMC) was selected for this study. Because of the way our sample was selected (bright stars with clear disc events), it likely represents the densest discs in the SMC. Like their siblings in the Galaxy, the mass of the disc in the SMC increases with the stellar mass. The typical mass and angular momentum loss rates associated with the disk events are of the order of $\sim$$10^{-10}\, M_\odot\,\mathrm{yr^{-1}}$ and $\sim$$5\times 10^{36}\, \mathrm{g\, cm^{2}\, s^{-2}}$, respectively. The values of $α$ found in this work are typically of a few tenths, consistent with recent results in the literature and with the ones found in dwarf novae, but larger than current theory predicts. Considering the sample as a whole, the viscosity parameter is roughly two times larger at build-up ($\left\langleα_\mathrm{bu}\right\rangle = 0.63$) than at dissipation ($\left\langleα_\mathrm{d}\right\rangle = 0.26$). Further work is necessary to verify whether this trend is real or a result of some of the model assumptions.
△ Less
Submitted 21 February, 2018;
originally announced February 2018.
-
An analysis of the V-band light curve of the Be star omega CMa with the viscous decretion disk model
Authors:
Mohammad Reza Ghoreyshi,
Alex Cavalieri Carciofi
Abstract:
We analyze the V-band photometry data of the Be star omega CMa, observed during the last four decades. The data is fitted by hydrodynamic models based on the viscous decretion disk (VDD) theory, in which a disk around a fast-spinning Be star is formed by material ejected by the central star and driven to progressively wider orbits by means of viscous torques. For the first time, we apply the model…
▽ More
We analyze the V-band photometry data of the Be star omega CMa, observed during the last four decades. The data is fitted by hydrodynamic models based on the viscous decretion disk (VDD) theory, in which a disk around a fast-spinning Be star is formed by material ejected by the central star and driven to progressively wider orbits by means of viscous torques. For the first time, we apply the model for both the disk build up and the dissipation phases. Our simulations offer a good description of the photometric variability in both phases, which suggests that the VDD model adequately describes the disk structural evolution. Furthermore, our analysis allowed us to determine the viscosity parameter (alpha) of the gas, as well as the net mass loss rate. We find that alpha is variable, ranging from 0.1 to 1.0, and that build up phases have larger values of alpha than the dissipation phases. Additionally, we find that, contrary to what is generally assumed, even during quiescence the outward mass flux is never zero, suggesting that the star alternates between a high mass-loss phase (outburst) and a low mass-loss phase (quiescence).
△ Less
Submitted 22 February, 2017;
originally announced February 2017.
-
Modeling the Complete Lightcurve of omega CMa
Authors:
M. R. Ghoreyshi,
A. C. Carciofi,
L. R. Rimulo,
S. Otero,
D. Baade,
J. E. Bjorkman,
A. T. Okazaki,
Th. Rivinius
Abstract:
We have used the radiative transfer code HDUST to analyze and interpret the long-term photometric behavior of the Be star omega CMa, considering four complete cycles of disk formation and dissipation. This is the first time in which a full lightcurve of a Be star was investigated and modeled including both disk build-up and dissipation phases. Based on the quite good fit of the observed data we we…
▽ More
We have used the radiative transfer code HDUST to analyze and interpret the long-term photometric behavior of the Be star omega CMa, considering four complete cycles of disk formation and dissipation. This is the first time in which a full lightcurve of a Be star was investigated and modeled including both disk build-up and dissipation phases. Based on the quite good fit of the observed data we were able to derive the history of stellar mass decretion rates (including long- and short-term changes) during the disk formation and dissipation phases in all four cycles.
△ Less
Submitted 29 June, 2015;
originally announced June 2015.
-
The Effect of the Circumstellar Material on the Light Curves of Eclipsing Binary Systems
Authors:
S. M. R. Ghoreyshi,
J. Ghanbari,
Fatemeh Salehi
Abstract:
This study inspects the influence of various effects and free parameters of the accretion disc and circumstellar material on the emerging light curve of eclipsing binary systems that have a circumstellar disc, by using the SHELLSPEC code. The results indicate that some of the parameters namely the temperature and inclination of the disc, spot, jet, stream and shell significantly affect on the emer…
▽ More
This study inspects the influence of various effects and free parameters of the accretion disc and circumstellar material on the emerging light curve of eclipsing binary systems that have a circumstellar disc, by using the SHELLSPEC code. The results indicate that some of the parameters namely the temperature and inclination of the disc, spot, jet, stream and shell significantly affect on the emerging light curve while some other parameters namely the exponent of the power-law behavior of the density of the disc, microturbulence, inner and outer radius of the disc don't noticeably affect on the emerging light curve. An application to the Algol-type eclipsing binary system AV Del and an accretion disc model for the system using the SHELLSPEC code is included.
△ Less
Submitted 18 August, 2011;
originally announced August 2011.
-
Reanalysis of two eclipsing binaries: EE Aqr and Z Vul
Authors:
Sayyed Mohammad Reza Ghoreyshi,
Jamshid Ghanbari,
Fatemeh Salehi
Abstract:
We study the radial-velocity and light curves of the two eclipsing binaries EE Aqr and Z Vul. Using the latest version of the Wilson & Van Hamme (2003) model, absolute parameters for the systems are determined. We find that EE Aqr and Z Vul are near-contact and semi-detached systems, respectively. The primary component of EE Aqr fills about 96% of its 'Roche lobe', while its secondary one appear…
▽ More
We study the radial-velocity and light curves of the two eclipsing binaries EE Aqr and Z Vul. Using the latest version of the Wilson & Van Hamme (2003) model, absolute parameters for the systems are determined. We find that EE Aqr and Z Vul are near-contact and semi-detached systems, respectively. The primary component of EE Aqr fills about 96% of its 'Roche lobe', while its secondary one appears close to completely filling this limiting volume. In a similar way, we find fill-out proportions of about 72 and 100% of these volumes for the primary and secondary components of Z Vul respectively. We compare our results with those of previous authors.
△ Less
Submitted 5 May, 2008;
originally announced May 2008.
-
An Accretion-Disc Model for the Algol-Type Eclipsing Binary System AV Del
Authors:
Sayyed Mohammad Reza Ghoreyshi,
Jamshid Ghanbari,
Fatemeh Salehi
Abstract:
This study inspects the light and radial-velocity curves of the eclipsing binary AV Del. In comparison with other studies already done, the study shows that the absolute elements, fundamental orbital and physical parameters of the system can be determined using the Wilson-Devinney code. Using these parameters, the configuration of the system is presented. Then, an accretion disc model for the syst…
▽ More
This study inspects the light and radial-velocity curves of the eclipsing binary AV Del. In comparison with other studies already done, the study shows that the absolute elements, fundamental orbital and physical parameters of the system can be determined using the Wilson-Devinney code. Using these parameters, the configuration of the system is presented. Then, an accretion disc model for the system is introduced by using the SHELLSPEC code. The results indicate that AV Del is a semi-detached system in which an optically thick accretion disc is surrounding the primary star. The outer radius of the disc is 8.0 R_sun}, corresponding to a distance of 1.1 R_sun} from the surface of the secondary. Also, the temperature of the disc is calculated to be T=5700 K.
△ Less
Submitted 26 March, 2011; v1 submitted 5 May, 2008;
originally announced May 2008.
