-
Effect of Meditation on Heart Rate Variability
Authors:
Sobhendu Kumar Ghatak
Abstract:
The dynamics of the autonomic nervous system, a prime factor for variation of heart rate is modulated by lifestyle factors like meditation and breathing exercises. The effect of meditation (dhyana)practiced by disciples of Ramakrishna Mission(RKM) on the heart rate variability is examined. The heart rate (HR)of a group of disciples of RKM is obtained from ECG signal recorded over a short time dura…
▽ More
The dynamics of the autonomic nervous system, a prime factor for variation of heart rate is modulated by lifestyle factors like meditation and breathing exercises. The effect of meditation (dhyana)practiced by disciples of Ramakrishna Mission(RKM) on the heart rate variability is examined. The heart rate (HR)of a group of disciples of RKM is obtained from ECG signal recorded over a short time duration. Lagged Poincare plot of the heart rate(HR), the method of the principal component analysis, and the autocorrelation of HR fluctuations are used to analyze the HR. The variation of Poincare parameters (SD1),(SD2) and their ratio (SD12), with a lagged number, are non-linear and reveal a significant change with meditation. In particular, the magnitude of the slope and the curvature of(SD12) with lagged number increases after meditation. The meditation reduces the heart rate and increases the stroke volume. A strong correlation between slope and curvature of (SD12) is noted from the correlation matrix of multi-dimensional data set resulting from the Poincaré plot. The principal components (PC) of data resulting from pre-and post-meditation are well separated in PC-space. The entropy associated with R-wave fluctuations for all meditators is reduced after meditation. The auto-correlation of HR fluctuations exhibits a highly correlated pattern after meditation. The study suggests that meditation improves the heart rate dynamics and the 'calmness' of mind.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Controlled edge dependent stacking of WS2-WS2 Homo- and WS2-WSe2 Hetero-structures: A Computational Study
Authors:
Kamalika Ghatak,
Kyung Nam Kang,
Eui-Hyeok Yang,
Dibakar Datta
Abstract:
Transition Metal Dichalcogenides (TMDs) are one of the most studied two-dimensional materials in the last 5-10 years due to their extremely interesting layer dependent properties. Despite the presence of vast research work on TMDs, the complex relationship between the electrochemical and physical properties make them the subject of further research. Our main objective is to provide a better insigh…
▽ More
Transition Metal Dichalcogenides (TMDs) are one of the most studied two-dimensional materials in the last 5-10 years due to their extremely interesting layer dependent properties. Despite the presence of vast research work on TMDs, the complex relationship between the electrochemical and physical properties make them the subject of further research. Our main objective is to provide a better insight into the electronic structure of TMDs. This will help us better understand the stability of the bilayer post-growth homo/hetero products based on the various edge-termination, and different stacking of the two layers. In this regard, two Tungsten (W) based non-periodic chalcogenide flakes (sulfides and selenides) were considered. An in-depth analysis of their different edge termination and stacking arrangement was performed via Density Functional Theory method using VASP software. Our finding indicates the preference of chalcogenide (c-) terminated structures over the metal (m-) terminated structures for both homo and hetero layers, and thus strongly suggests the nonexistence of the m-terminated TMDs bilayer products.
△ Less
Submitted 25 November, 2019;
originally announced November 2019.
-
The Inherent Behavior of Graphene Flakes in Water: A Molecular Dynamics Study
Authors:
Priyanka Solanky,
Vidushi Sharma,
Kamalika Ghatak,
Jatin Kashyap,
Dibakar Datta
Abstract:
Graphene-water interaction has been under scrutiny ever since graphene discovery and realization of its exceptional properties. Several computational and experimental reports exist that have tried to look into the interactions involved, however, none of them addresses the issue in its entirety. We have tested the inherent hydrophobic behavior of a small graphene in water droplet by the means of MD…
▽ More
Graphene-water interaction has been under scrutiny ever since graphene discovery and realization of its exceptional properties. Several computational and experimental reports exist that have tried to look into the interactions involved, however, none of them addresses the issue in its entirety. We have tested the inherent hydrophobic behavior of a small graphene in water droplet by the means of MD simulations. The analysis has been extended to multiple graphene flakes in water and their respective size dependent responses to water droplet. Graphene retreats from water droplet to encapsulate it from the surface. This response was highly dependent upon graphene size with respect to water content. Additionally, we also report self-assembly of multilayered graphene in water by means of MD simulations, an observation which can be utilized to synthesize such structures in a cost-effective way by experimentalists. To fully comprehend graphene behavior in water, graphene deformation was analyzed in the presence of water molecules. It was noticed that graphene wrinkled to wrap around water molecules and resisted complete failure, one that is seen in case of a sole graphene sheet. Our work will not only address the question about whether graphene is hydrophobic or hydrophilic but also provide insight into the behavior of graphene surface and mobility when exposed to water which can be exploited in numerous applications.
△ Less
Submitted 18 October, 2018;
originally announced November 2018.
-
Effect of Cobalt Content on the Electrochemical Properties and Structural Stability of NCA Type Cathode Materials
Authors:
Kamalika Ghatak,
Swastik Basu,
Tridip Das,
Hemant Kumar,
Dibakar Datta
Abstract:
At present, the most common type of cathode materials, NCA [Li_(1-x)Ni_(0.80)Co_(0.15)Al_(0.05)O_(2), x = 0 to 1], have a very high concentration of cobalt. Since cobalt is toxic and expensive, the existing design of cathode materials is neither cost-effective nor environmentally benign. We have performed density functional theory (DFT) calculations to investigate electrochemical, electronic, and…
▽ More
At present, the most common type of cathode materials, NCA [Li_(1-x)Ni_(0.80)Co_(0.15)Al_(0.05)O_(2), x = 0 to 1], have a very high concentration of cobalt. Since cobalt is toxic and expensive, the existing design of cathode materials is neither cost-effective nor environmentally benign. We have performed density functional theory (DFT) calculations to investigate electrochemical, electronic, and structural properties of four types of NCA cathode materials with the simultaneous decrease in Co content along with the increase in Ni content. Our results show that even if the cobalt concentration is significantly decreased from 16.70 % (NCA_I) to 4.20 % (NCA_IV), variation in intercalation potential and specific capacity is not significant. For example, in case of 50% Li concentration, the voltage drop is only ~17% while the change in specific capacity is negligible. Moreover, we have also explored the influence of sodium do** in the intercalation site on the electrochemical, electronic, and structural properties. By considering two extreme cases of NCAs (i.e., with highest and lowest Co content: NCA_I and NCA_IV respectively), we have demonstrated the importance of Na do** from the structural and electronic point of view. Our results provide insight into the design of environmentally benign, low-cost cathode materials with reduced cobalt concentration.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Amorphous Germanium as a Promising Anode Material for Sodium Ion Batteries: A First Principle Study
Authors:
Vidushi Sharma,
Kamalika Ghatak,
Dibakar Datta
Abstract:
The abundance of Sodium (Na), its low-cost, and low reduction potential provide a lucrative inexpensive, safe, and environmentally benign alternative to Lithium Ion Batteries (LIBs). The significant challenges in advancing Sodium Ion Battery (NIB) technologies lies in finding the better electrode materials. Experimental investigations revealed the real potency of Germanium (Ge) as suitable anode m…
▽ More
The abundance of Sodium (Na), its low-cost, and low reduction potential provide a lucrative inexpensive, safe, and environmentally benign alternative to Lithium Ion Batteries (LIBs). The significant challenges in advancing Sodium Ion Battery (NIB) technologies lies in finding the better electrode materials. Experimental investigations revealed the real potency of Germanium (Ge) as suitable anode materials for NIBs. However, a systematic atomistic study is necessary to understand the fundamental aspects of capacity-voltage correlation, microstructural changes of Ge, as well as diffusion kinetics. We, therefore, performed the Density Functional Theory (DFT) and Ab Initio Molecular Dynamics (AIMD) simulation to investigate the sodiation-desodiation kinetics in Germanium-Sodium system (Na64Ge64). We analyzed the intercalation potential and capacity correlation for intermediate equilibrium structures and compared our data with the experimental results. Effect of sodiation on inter-atomic distances within Na-Ge system is analyzed by means of Pair Correlation Function (PCF). This provides insight into possible microstructural changes taking place during sodiation of amorphous Ge (a-Ge). We further investigated the diffusivity of sodium in a-Ge electrode material and analyzed the volume expansion trend for Na64Ge64 electrode system. Our computational results provide the fundamental insight into the atomic scale and help experimentalists design Ge based NIBs for real-life applications.
△ Less
Submitted 1 April, 2018;
originally announced April 2018.
-
Poincaré parameters and principal component analysis of Heart rate variability of subjects with health disorder
Authors:
Sobhendu Kumar Ghatak,
Subhra Aditya
Abstract:
Heart rate variability,important marker for modulation of autonomic nervous system is studied for diabetic,hypertensive and control group of subjects.Lagged Poincaré plot of heart rate(HR),method of principal component analysis and auto-correlation of HR fluctuation are used to analyze HR obtained from ECG signal recorded over short time duration.The parameters $(SD1)$,$(SD2)$ and their ratio…
▽ More
Heart rate variability,important marker for modulation of autonomic nervous system is studied for diabetic,hypertensive and control group of subjects.Lagged Poincaré plot of heart rate(HR),method of principal component analysis and auto-correlation of HR fluctuation are used to analyze HR obtained from ECG signal recorded over short time duration.The parameters $(SD1)$,$(SD2)$ and their ratio $(SD12)$,characterizing the Poincaré plot reveal a significant reduction of their values for diabetic and hypertensive subjects compared to the corresponding results of control one.The slope and the curvature of the plot of these parameters with lagged number exhibit similar trend.In particular,the curvature of $(SD12)$ for the control group differs widely from that of other groups.The principal component analysis is used for analysing multi-dimensional data set resulting from the Poincaré plot for all subjects.The correlation matrix points out significant correlation between slope and curvature.The analysis demonstrates that three groups are well separated in the domain of two significant principal components.The auto-correlation of HR fluctuation exhibits highly correlated pattern for subjects with health disorder compared to that of control subject.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Effect of Decreasing Cobalt Content on the Electrochemical Properties and Structural Stability of Li_(1-x)Ni_(y)Co_(z)Al_(0.05)O_(2) Type Cathode Materials
Authors:
Kamalika Ghatak,
Hemant Kumar,
Siva Nadimpalli,
Dibakar Datta
Abstract:
In Lithium ion batteries (LIBs), proper design of cathode materials influences its intercalation behavior, overall cost, structural stability, and its impact on environment. At present, the most common type of cathode materials, NCA , has very high cobalt concentration. Since cobalt is toxic and expensive, the existing design of cathode materials is not cost-effective, and environmentally benign.…
▽ More
In Lithium ion batteries (LIBs), proper design of cathode materials influences its intercalation behavior, overall cost, structural stability, and its impact on environment. At present, the most common type of cathode materials, NCA , has very high cobalt concentration. Since cobalt is toxic and expensive, the existing design of cathode materials is not cost-effective, and environmentally benign. However, these immensely important issues have not yet been properly addressed. Therefore, we have performed density functional theory (DFT) calculations to investigate three types of NCA cathode materials NCA_(Co=0.15), NCA_(Co=0.10), NCA_(Co=0.05). Our results show that even if the cobalt concentration is significantly decreased from NCA_(Co=0.15) to NCA_(Co=0.05), variation in intercalation potential and specific capacity is negligible. For example, in case of 50% Li concentration, voltage drop is ~0.12V while change in specific capacity is negligible. Moreover, decrease in cobalt concentration doesn't influence the structural stability. We have also explored the influence of sodium do** on the electrochemical and structural properties of these three structures. Our results provide insight into the design of cathode materials with reduced cobalt concentration, environmentally benign, low-cost cathode materials.
△ Less
Submitted 1 April, 2018; v1 submitted 26 April, 2017;
originally announced April 2017.
-
Magnetic Behaviour of Disordered Ising Ferrimagnet in High Magnetic Field
Authors:
Sobhendu K. Ghatak
Abstract:
The magnetic behaviour of a disordered ferrimagnetic system Ap B1-p where both A and B represent the magnetic atoms with respective spin SA = 1/2 and SB = 1 in presence of high magnetic field is treated theoretically.Assuming the magnetic interaction can be described through Ising Hamiltonian the approximate free energy is obtained using the cluster-variational method. The field dependence of the…
▽ More
The magnetic behaviour of a disordered ferrimagnetic system Ap B1-p where both A and B represent the magnetic atoms with respective spin SA = 1/2 and SB = 1 in presence of high magnetic field is treated theoretically.Assuming the magnetic interaction can be described through Ising Hamiltonian the approximate free energy is obtained using the cluster-variational method. The field dependence of the magnetization is then obtained for different concentration p and exchange parameters (JAA, JBB and JAB). For p = 0.5,the magnetization M in ferrimagnetic state and in absence of compensation temperature Tcm vanishes at TC.Field induced reversal of M is found at switching temperature TS (<TC) which is decreasing function of field H.A maximum in M is found above TS and the maximum value of M increases with field.In ferrimagnetic state M increases almost linearly at high H region. For system with large ferromagnetic JAA,the compensation temperature Tcm is increasing function of JBB and JAB .The decrease in compensation temperature is linear at small field and tends to saturate at higher field.The sharpness of the magnetization reversal is increased with H.For fully compensated state of the system with p = 2/3,the magnetization in presence of H also exhibits switching behaviour at TS .For p = 0.2 the field induced reversal of magnetization occurs more sharply.The orientational switching of the sublattice magnetization MA and MB with field increases the Zeeman energy and is the origin of magnetization reversal at Ts
△ Less
Submitted 26 July, 2011;
originally announced July 2011.
-
Lagged Poincaré and auto-correlation analysis of Heart rate variability in diabetes
Authors:
S. K. Ghatak,
B. Roy
Abstract:
The heart rate variability (HRV) in diabetic human subjects, has been analyzed using lagged Poincaré plot, auto-correlation and the detrended fluctuation analysis methods. The parameters $SD1$, and $SD12 (= SD1/SD2)$ for Poincaré plot for diabetic are lower than that for non-diabetic subjects and reverse is case for $SD2$ for all lagged number (m). The slope and the curvature of the plot SD12 vs m…
▽ More
The heart rate variability (HRV) in diabetic human subjects, has been analyzed using lagged Poincaré plot, auto-correlation and the detrended fluctuation analysis methods. The parameters $SD1$, and $SD12 (= SD1/SD2)$ for Poincaré plot for diabetic are lower than that for non-diabetic subjects and reverse is case for $SD2$ for all lagged number (m). The slope and the curvature of the plot SD12 vs m is much reduced for diabetic subject. The scatter plot of two successive interbeat intervals points out smaller variability in diabetic heart. The detrended fluctuation exponent has a higher value for diabetic group. The auto-correlation function of the deviation of interbeat interval in diabetic group shows highly correlated pattern when compared to that of normal one. The study suggests that the curvature of $SD12$ and auto-correlation method appear to be better way to assess the alteration of regulatory system on heart dynamics in diabetic condition.
△ Less
Submitted 28 May, 2010;
originally announced May 2010.
-
Modulation of Autonomous Nervous System activity by gyrosonic stimulation
Authors:
S. K. Ghatak,
B. Roy,
R. Choudhuri,
S. Bandopadhaya
Abstract:
A novel audio binaural stimulus that generates rotational perceptions of sound movement in brain at a particular predetermined frequency is referred as gyrosonics. The influence of gyrosonics on autonomic nervous system of healthy subjects has been examined by analyzing heart rate variability (HRV) in time- and frequency- domain. The M-lagged Poincare plot shows that the parameters SD1, SD2 and ra…
▽ More
A novel audio binaural stimulus that generates rotational perceptions of sound movement in brain at a particular predetermined frequency is referred as gyrosonics. The influence of gyrosonics on autonomic nervous system of healthy subjects has been examined by analyzing heart rate variability (HRV) in time- and frequency- domain. The M-lagged Poincare plot shows that the parameters SD1, SD2 and ratio SD12 (SD1/SD2) increases with lagged number M, and M-dependence is well described by Pade' approximant $χ\frac{1+βM}{1+γM}$ where values of $χ$, $β$ and $ γ$ depend on parameters SD1,SD2 and SD12. The values of these parameters for different M are augmented after gyrosonic stimulation. The slope and magnitude of curvature of SD1 and SD12 vs M plot increase considerably due to stimulation. The DFA analysis exhibits decrease in value of exponent $α$ due to stimulation. This stimulation results slower Heart rate, higher values of the standard deviation SD and the root-mean squared successive differences (RMSSD) in RR-interval. The spectral power of both low (LF) - and high (HF) - frequency go up due to the stimulation. The results suggest an improvement of the sympatho-vagal balance due to this novel audio stimulus.
△ Less
Submitted 28 May, 2010; v1 submitted 10 March, 2010;
originally announced March 2010.
-
Interplay of magnetic order and Jahn-Teller distortion in a model with strongly correlated electron system
Authors:
L. Haritha,
G. Gangadhar Reddy,
A. Ramakanth,
S. K. Ghatak,
W. Nolting
Abstract:
The Hubbard model has been employed successfully to understand many aspects of correlation driven physical properties, in particular, the magnetic order in itenerant electron systems. In some systems such as Heusler alloys, manganites etc., it is known that, in addition to magnetic order, distortion induced by Jahn-Teller(J-T) effect also exists. In this paper, based on two-fold degenerate Hubba…
▽ More
The Hubbard model has been employed successfully to understand many aspects of correlation driven physical properties, in particular, the magnetic order in itenerant electron systems. In some systems such as Heusler alloys, manganites etc., it is known that, in addition to magnetic order, distortion induced by Jahn-Teller(J-T) effect also exists. In this paper, based on two-fold degenerate Hubbard model, the influence of magnetic order on J-T distortion is investigated. The electron correlation is treated using a spectral density approach and J-T interaction is added to the model. We find that magnetic order and structural distortion coexist at low temperature $T$ for a certain range of electron correlation strength $U$, J-T coupling strength $G$ and band occupation $n$. At T=0, for a given $n$ and $U$, magnetic order is present but distortion appears only for a $G$ larger than a critical value. We also studied the temperature dependence of lattice strain and magnetization choosing a $G$ close to the critical value.
△ Less
Submitted 3 March, 2010; v1 submitted 19 February, 2010;
originally announced February 2010.
-
Gyrosonics a Novel Stimulant for Autonomic Nervous System
Authors:
S. K. Ghatak,
S. S. Ray,
R. Choudhuri,
S. Banerjee
Abstract:
Gyrosonics refers to novel audio binaural stimulus that produces rotational perceptions of sound movement in head at a particular predetermined frequency. Therapeutic effect observed with this is considered to be associated with modification of arousal of autonomic nervous system. The heart rate variability (HRV), non-invasive measure of autonomic nervous system, has been measured for group of 3…
▽ More
Gyrosonics refers to novel audio binaural stimulus that produces rotational perceptions of sound movement in head at a particular predetermined frequency. Therapeutic effect observed with this is considered to be associated with modification of arousal of autonomic nervous system. The heart rate variability (HRV), non-invasive measure of autonomic nervous system, has been measured for group of 30 subjects for pre- and post- gyrosonic installation. The time- and frequency- domain analysis of HRV results show overall decrease in sympathetic response and increase in para- sympathetic response due to listening of gyro sonics.
△ Less
Submitted 29 June, 2009;
originally announced June 2009.
-
Influence of Demagnetization Effect on Giant Magneto Impedance of soft Ferromagnetic Metal
Authors:
S. K. Ghatak
Abstract:
The large change in electromagnetic impedance in ferromagnetic state of soft magnetic metals in presence of biasing magnetic field is associated with change in screening of electromagnetic field. The screening depends on the permeability of the metal. Apart from dependence on intrinsic properties of metal the permeability depends on size of the sample. It is observed that the decrease in MI in a…
▽ More
The large change in electromagnetic impedance in ferromagnetic state of soft magnetic metals in presence of biasing magnetic field is associated with change in screening of electromagnetic field. The screening depends on the permeability of the metal. Apart from dependence on intrinsic properties of metal the permeability depends on size of the sample. It is observed that the decrease in MI in amorphous ferromagnetic ribbon of Fe40Ni40B20 alloy is large for long sample whereas corresponding change is small for short one with same biasing field. As intrinsic magnetic properties and bias field are same and the demagnetization factor increases with reduction of length of the sample the reduction of MI effect is associated with demagnetization field.
△ Less
Submitted 29 June, 2009;
originally announced June 2009.
-
Model of the Interplay of Band J-T Effect with Magnetic Order Mediated by Exchange Interaction
Authors:
G. Gangadhar Reddy,
A. Ramakanth,
S. K. Ghatak,
S. N. Behera,
W. Nolting,
T. Venkatappa Rao
Abstract:
A model calculation is presented with the aim to study the interplay between magnetic and structural transitions. The model consists of an orbitally doubly degenerate conduction band and a periodic array of local moments. The band electrons interact with the local spins via the s-f interaction. The interaction of the band electrons with phonons is introduced by including band Jahn-Teller (J-T) i…
▽ More
A model calculation is presented with the aim to study the interplay between magnetic and structural transitions. The model consists of an orbitally doubly degenerate conduction band and a periodic array of local moments. The band electrons interact with the local spins via the s-f interaction. The interaction of the band electrons with phonons is introduced by including band Jahn-Teller (J-T) interaction. The model Hamiltonian, including the above terms, is solved for the single particle Greens function. In doing this an ansatz for selfenergy of electrons, which was developed earlier has been utilized. The quasiparticle density of states (QDOS) and hence the orbital populations are calculated treating the ferromagnetism of local moments in the mean field approximation. The critical value of electron-phonon interaction ($G$) for the appearance of the band J-T distortion is higher in the ferromagnetic state. The strain appears at a critical temperature ($T_s$) when $G$ is greater than the critical value. The onset of ferromagnetism at $T_C$ ($<T_s$) arrests the growth of the strain. It is concluded that the magnetization hinders the structural transition. The quasiparticle density of states are presented to interpret these results.
△ Less
Submitted 21 September, 2006;
originally announced September 2006.
-
Simulation of stress-impedance effects in low magnetostrictive films
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
A theoretical study of stress-impedance effect based on the solution of Landau-Lifsitz-Gilbert equation has been carried out. The results show that stress impedance effects depend largely on several extrinsic (external bias field, external frequency) and intrinsic (orientation and magnitude of uniaxial anisotropy, dam**) parameters.
A theoretical study of stress-impedance effect based on the solution of Landau-Lifsitz-Gilbert equation has been carried out. The results show that stress impedance effects depend largely on several extrinsic (external bias field, external frequency) and intrinsic (orientation and magnitude of uniaxial anisotropy, dam**) parameters.
△ Less
Submitted 22 August, 2006;
originally announced August 2006.
-
Influence of stress on magneto-impedance in Co71-xFexCr7Si8B14 (x = 0, 2) amorphous ribbons
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
Systematic measurements of stress-impedance (SI) have been carried out using Co-rich amorphous ribbons of nominal composition Co71-xFexCr7Si8B14 (x = 0, 2) at various excitation frequencies and bias fields and at room temperature. The impedance, Z for both the samples was found to be very sensitive functions of applied tensile stresses (up to 100MPa) exhibiting a maximum SI ratio as much as 80%…
▽ More
Systematic measurements of stress-impedance (SI) have been carried out using Co-rich amorphous ribbons of nominal composition Co71-xFexCr7Si8B14 (x = 0, 2) at various excitation frequencies and bias fields and at room temperature. The impedance, Z for both the samples was found to be very sensitive functions of applied tensile stresses (up to 100MPa) exhibiting a maximum SI ratio as much as 80% at low frequency ~ 0.1MHz. The nature of variation of SI changes with the excitation frequency especially at higher frequencies in MHz region where it exhibits a peak. Magnetization measurements were also performed to observe the effects of applied stresses and magnetization decreased with the application of stress confirming the negative magnetostriction co-efficient of both the samples. Both the samples exhibited negative magneto-impedance (MI) when the variation of Z is observed with the applied bias magnetic field, H. The impedance as functions of applied magnetic field, Z(H), decreases with the application of stress thus making the MI curves broader. Maximum MI ratio as large as 99% has been observed for both the samples at low fields ~ 27Oe.
△ Less
Submitted 22 August, 2006;
originally announced August 2006.
-
Title Cluster-Variational Treatment of Disordered Mixed Spin Ising Model
Authors:
Sobhendu K. Ghatak
Abstract:
A disordered alloy Ap B1-p where both A and B represent the magnetic atoms with respective spin SA =1/2 and SB =1 and whose magnetic interaction can be described through Ising Hamiltonian is treated using the cluster-variational method. In this method it is assumed that the system is built out of building block which is embedded in an effective field. Taking building block as 4-atom cluster the…
▽ More
A disordered alloy Ap B1-p where both A and B represent the magnetic atoms with respective spin SA =1/2 and SB =1 and whose magnetic interaction can be described through Ising Hamiltonian is treated using the cluster-variational method. In this method it is assumed that the system is built out of building block which is embedded in an effective field. Taking building block as 4-atom cluster the approximate free energy of the alloy is then obtained by treating the interactions between spins within the cluster of all possible configurations in exact manner and the rest of the interaction by an effective variational field . The magnetization M and transition temperature Tc are then calculated for different concentration and exchange parameters (JAA, JBB and JAB). The magnetization M exhibits different kinds of ferrimagnetic behaviour depending on concentration and relative strength of intra- and inter- sub-network exchange interactions. For antiferromagnetic JAB, the sub-network magnetization saturates and aligned antiferromagnetically at low temperature. The existence of compensation temperature Tcm, where total magnetization reverses its direction, depends sensitively on relative values of JAA/ JAB and JBB/ JAB and p. For B (A)-rich alloy with small JAB, the direction of net magnetization remains same upto Tc and a maximum of M appears at intermediate T < Tc when JBB>> JAA (JBB<< JAA).When magnitude of JAB > JAA, JBB, Tc exhibits a maximum with p. The transition temperature is much less than the mean-field value for all cases. The magnetic susceptibility for diverges and is Curie-Wiess like at T >>Tc. The meta-magnetic behaviour at high magnetic field has been found. Some of these results are in tune with experimental observation in amorphous rare-earth-transition metal alloys.
△ Less
Submitted 12 July, 2006;
originally announced July 2006.
-
Very large Magneto-impedance and its scaling behavior in amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
Magneto-impedance (MI) effects have been observed for amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon which has been excited by an a.c. magnetic field parallel to the length of the ribbon. Maximum relative change in MI as large as -99% was observed which has never been reported before. The relative change in MI, when plotted against scaled field was found to be nearly frequency independent. A phenomenolog…
▽ More
Magneto-impedance (MI) effects have been observed for amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon which has been excited by an a.c. magnetic field parallel to the length of the ribbon. Maximum relative change in MI as large as -99% was observed which has never been reported before. The relative change in MI, when plotted against scaled field was found to be nearly frequency independent. A phenomenological formula for magneto-impedance, Z(H), in a ferromagnetic material, is proposed based on Pade approximant to describe the scaled behavior of MI.
△ Less
Submitted 8 October, 2007; v1 submitted 8 June, 2006;
originally announced June 2006.
-
Excitation Amplitude Dependence of Low Frequency Magneto-impedance of Amorphous Fe73.5Nb3Cu1Si13.5B9 Ribbon
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
Magneto-impedance (MI) of soft ferromagnetic materials is a sensitive function of the amplitude and frequency of exciting a.c magnetic field. MI (Z) of amorphous ferromagnetic ribbon of nominal composition Fe73.5Nb3 Cu1 Si13.5 B9 is measured at different excitation currents with frequency ranging from 30kHz to 120KHz The excitation (a.c) and biasing (d.c) magnetic fields Hdc are parallel to ribb…
▽ More
Magneto-impedance (MI) of soft ferromagnetic materials is a sensitive function of the amplitude and frequency of exciting a.c magnetic field. MI (Z) of amorphous ferromagnetic ribbon of nominal composition Fe73.5Nb3 Cu1 Si13.5 B9 is measured at different excitation currents with frequency ranging from 30kHz to 120KHz The excitation (a.c) and biasing (d.c) magnetic fields Hdc are parallel to ribbon axis. At zero dc fields, Z exhibits non-linear dependence on excitation amplitude whereas at higher d.c fields (9Oe) Z is nearly independent of excitation amplitude. The impedance is maximum at zero bias field and sharply decreases as Hdc increases and almost zero hysterisis has been observed as Hdc is scanned. The maximum relative change of impedance (Z(H)-Z(H=0))/Z(H=0) is found to increase from nearly 45 to 60 percent when the excitation fields goes up from 14A/m to 140A/m. The large MI is associated with screening of electromagnetic field by magnetization induced by exciting ac field.
△ Less
Submitted 19 April, 2006;
originally announced April 2006.
-
Stress - and Magneto-Impedance in Co71-xFexCr7Si8B14 (x = 0, 2) amorphous ribbons
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
Systematic measurements of stress impedance (SI) and magneto-impedance (MI) have been carried out using Co-rich amorphous ribbons of nominal composition Co71-xFexCr7Si8B14 (x = 0, 2) at various excitation frequencies and bias fields and at room temperature. The impedance, Z, for both the samples was found to be very sensitive functions of applied tensile stress (up to 100MPa) exhibiting a maximu…
▽ More
Systematic measurements of stress impedance (SI) and magneto-impedance (MI) have been carried out using Co-rich amorphous ribbons of nominal composition Co71-xFexCr7Si8B14 (x = 0, 2) at various excitation frequencies and bias fields and at room temperature. The impedance, Z, for both the samples was found to be very sensitive functions of applied tensile stress (up to 100MPa) exhibiting a maximum SI ratio as much as 80% at low frequency ~ 0.1MHz. The nature of variation of impedance, Z, changes with the excitation frequency especially at higher frequencies in MHz region where it exhibits a peak. Magnetization measurements were also performed to observe the effects of applied stress and magnetization decreases with the application of stress confirming the negative magnetostriction co-efficient of both the samples. Both the samples exhibited negative magneto-impedance when the variation of Z is observed with the applied bias magnetic field, H. Maximum MI ratio as large as 99% has been observed for both the samples at low fields ~ 27Oe. The impedance as functions of applied magnetic field, Z(H), decreases with the application of stress thus making the MI curves broader. Based on the electromagnetic screening and magnetization dynamics and incorporating the Gilbert and the Bloch-Bloembergen dam** and stress dependent anisotropy, the SI has been calculated and is found to describe well the stress and field dependence of impedance of the two samples.
△ Less
Submitted 22 August, 2006; v1 submitted 19 April, 2006;
originally announced April 2006.
-
Influence of microwave annealing on GMI response and magnetization of an amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon
Authors:
B. Kaviraj,
S. K Ghatak
Abstract:
The resistive and reactive components of magneto-impedance was studied for the as-quenched and microwave annealed amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon as a function of biasing d.c magnetic fields (-60 to +60 Oe) and excitation frequencies (0.1, 1, 10 and 20MHz). The magneto-impedance (both components) response was much reduced for the microwave annealed ribbon and the changes were more discerna…
▽ More
The resistive and reactive components of magneto-impedance was studied for the as-quenched and microwave annealed amorphous Fe73.5Nb3Cu1Si13.5B9 ribbon as a function of biasing d.c magnetic fields (-60 to +60 Oe) and excitation frequencies (0.1, 1, 10 and 20MHz). The magneto-impedance (both components) response was much reduced for the microwave annealed ribbon and the changes were more discernable at higher excitation frequencies. The imaginary component of magneto-impedance showed maxima at finite (non-zero) d.c magnetic fields for both the as-quenched and microwave annealed ribbons. Magnetization measurements performed for both the as-quenched and microwave annealed ribbons revealed the magnetic hardness of the latter. The initial susceptibility decreases by two orders of magnitude for the microwave-annealed ribbon. XRD measurements indicated the transformation of the surface of the ribbon from the amorphous state to the crystalline one.
△ Less
Submitted 5 January, 2007; v1 submitted 15 April, 2006;
originally announced April 2006.
-
Anisotropic Dependence of Giant Magneto-Impedance of Amorphous Ferromagnetic Ribbon on Biasing Field
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
The magneto-impedance (MI) in amorphous ribbon of nominal composition Fe73.5Nb3Cu1Si13.5B9 has been measured at 1MHz and at room temperature for different configurations of exciting a.c and biasing d.c. fields. A large drop in both resistance and reactance is observed as a function of d.c magnetic field. When the d.c and a.c fields are parallel but normal to the axis of ribbon, smaller magnetic…
▽ More
The magneto-impedance (MI) in amorphous ribbon of nominal composition Fe73.5Nb3Cu1Si13.5B9 has been measured at 1MHz and at room temperature for different configurations of exciting a.c and biasing d.c. fields. A large drop in both resistance and reactance is observed as a function of d.c magnetic field. When the d.c and a.c fields are parallel but normal to the axis of ribbon, smaller magnetic field is needed to reduce the impedance to its small saturated value compared to the situation when fields are along the axis of ribbon. Larger d.c. field is required to lower the impedance when the d.c field acts perpendicular to the plane of the ribbon. Such anisotropy in magneto-impedance is related to the anisotropic response of the magnetization of ribbon. The large change of impedance is attributed to large variation of a.c permeability on the direction and magnitude of the dc biasing field.
△ Less
Submitted 5 January, 2007; v1 submitted 15 April, 2006;
originally announced April 2006.
-
Magnetic Field and Displacement sensor based on Giant Magneto-impedance effect
Authors:
B. Kaviraj,
S. K. Ghatak
Abstract:
A two-core transducer assembly using a Fe73.5Nb3Cu1Si13.5B9 ribbon to detect a change of magnetic field is proposed and tested for displacement (linear and angular) and current sensor. Two identical inductors, with the ribbon as core, are a part of two series resonance network, and are in high impedance state when excited by a small a.c field of 1MHz in absence of d.c biasing field (Hdc). When t…
▽ More
A two-core transducer assembly using a Fe73.5Nb3Cu1Si13.5B9 ribbon to detect a change of magnetic field is proposed and tested for displacement (linear and angular) and current sensor. Two identical inductors, with the ribbon as core, are a part of two series resonance network, and are in high impedance state when excited by a small a.c field of 1MHz in absence of d.c biasing field (Hdc). When the magnetic state of one inductor is altered by biasing field, produced by a bar magnet or current carrying coil, an ac signal proportional to Hdc is generated by transducer. The results for the sensitivity and linearity with displacement (linear and angular) of a magnet and with field from the current carrying coil are presented for two particular configurations of the transducer. High sensitivities of voltage response as much as 12micro-volt/micro-meter and 3mV/degree have been obtained for the transducer as a linear and angular displacement sensor respectively in the transverse configuration of exciting a.c and biasing d.c fields.
△ Less
Submitted 8 January, 2007; v1 submitted 15 April, 2006;
originally announced April 2006.
-
Giant magneto-impedance in Ag-doped La0.7Sr0.3MnO3
Authors:
S. K. Ghatak,
B. Kaviraj,
T. K. Dey
Abstract:
The resistive and reactive parts of the magneto-impedance of sintered ferromagnetic samples of La0.7Sr0.3-xAgxMnO3 (x = 0.05, 0.25) have been measured at room temperature (<Tc) over frequency interval 1KHz to 15MHz and in presence of magnetic field up to 4KOe. The field dependence of relative change in resistance is small in KHz region but increases strongly for higher frequency of excitation. T…
▽ More
The resistive and reactive parts of the magneto-impedance of sintered ferromagnetic samples of La0.7Sr0.3-xAgxMnO3 (x = 0.05, 0.25) have been measured at room temperature (<Tc) over frequency interval 1KHz to 15MHz and in presence of magnetic field up to 4KOe. The field dependence of relative change in resistance is small in KHz region but increases strongly for higher frequency of excitation. The maximum value of relative change in resistance at H =4KOe was found to be around 70% at 15MHz frequency.On the contrary the corresponding change in reactance has less frequency sensitivity and the maximum occurs at 1MHz frequency. The magneto-impedance is negative for all frequencies. The 'normalized magneto-impedance' as defined by [Z(H)-Z(0)]/[Z(0)-Z(4K)] when plotted against scaled field H/H1/2 is found to be frequency independent ; H1/2 is the field where 'normalized magneto-impedance' is reduced to half its maximum. A phenomenological formula for magneto-impedance Z (H) in ferromagnetic material is proposed based on Pade approximant. The formula for Z (H) predicts the scaled behavior of 'normalized magneto-impedance'.
△ Less
Submitted 31 December, 2006; v1 submitted 6 April, 2006;
originally announced April 2006.
-
An Inexpensive Arterial Pressure Wave Sensor and its application in different physiological condition
Authors:
Shantanu Sur,
S. K. Ghatak
Abstract:
Arterial Blood Pressure wave monitoring is considered to be important in assessment of cardiovascular system. We developed a novel pulse wave detection system using low frequency specific piezoelectric material as pressure wave sensor. The transducer detects the periodic change in the arterial wall diameter produced by pressure wave and the amplified signal after integration represents the press…
▽ More
Arterial Blood Pressure wave monitoring is considered to be important in assessment of cardiovascular system. We developed a novel pulse wave detection system using low frequency specific piezoelectric material as pressure wave sensor. The transducer detects the periodic change in the arterial wall diameter produced by pressure wave and the amplified signal after integration represents the pressure wave. The signal before integration is proportional to the rate of change of pressure wave and it not only reproduces the pressure waveform faithfully, but also its sharper nature helps to reliably detect the heart period variability (HPV). We have studied the position-specific (e.g. over carotid or radial artery) nature of change of this pulse wave signal (shape and amplitude) and also the changes at different physiological states.
△ Less
Submitted 8 December, 2005;
originally announced December 2005.
-
Effect of strain on the transport properties of the manganite systems
Authors:
S. Basak,
I. Chaudhuri,
S. K. Ghatak
Abstract:
The effect of strain on the resistivity and thermopower of ferromagnetic manganites has been examined based on the model that incorporates the electron-lattice interaction through the Jahn-Teller effect and an effective hop** determined by nearest neighbour spin-spin correlation of t2g electrons. The metal insulator transition temperature associated with resistivity decreases with increase in…
▽ More
The effect of strain on the resistivity and thermopower of ferromagnetic manganites has been examined based on the model that incorporates the electron-lattice interaction through the Jahn-Teller effect and an effective hop** determined by nearest neighbour spin-spin correlation of t2g electrons. The metal insulator transition temperature associated with resistivity decreases with increase in strain. In the presence of large strain the system remains in the semiconducting state. Thermopower (S) is positive and increasing function of strain and it exhibits a maximum with temperature. The temperature where maximum of S appears, shifts towards higher (lower) value with in the presence of magnetic field (strain). A large magneto-thermopower that depends on strain is obtained around metal-insulator transition.
△ Less
Submitted 15 April, 2001;
originally announced April 2001.
-
Pseudogap and its influence on normal and superconducting states of cuprates
Authors:
I. Chaudhuri,
A. Taraphder,
S. K. Ghatak
Abstract:
A model incorporating simultaneous superconducting and lattice instabilities has been studied in detail to estimate the nature of coupling and inter-play between them. The phase diagram is obtained in the temperature-filling plane at different values of the parameters of the model. It is found that a pseudogap develops in the distorted phase that inhibits the appearance of the superconducting tr…
▽ More
A model incorporating simultaneous superconducting and lattice instabilities has been studied in detail to estimate the nature of coupling and inter-play between them. The phase diagram is obtained in the temperature-filling plane at different values of the parameters of the model. It is found that a pseudogap develops in the distorted phase that inhibits the appearance of the superconducting transition. The superconducting instability is strongest for the regime of filling where the van Hove singularity in the 2D density of states is close to the chemical potential. The pseudogap, developed in the distorted phase, is a function of temperature via the temperature dependence of the distortion itself. Transport properties, namely resistivity and thermopower are found to be strongly dependent on the variations of the pseudogap.
△ Less
Submitted 28 June, 2000; v1 submitted 26 June, 2000;
originally announced June 2000.
-
Coexistence of Band Jahn Teller Distortion and superconductivity in correlated systems
Authors:
Haranath Ghosh,
Manidipa Mitra,
S. N. Behera,
S. K. Ghatak
Abstract:
The co-existence of band Jahn-Teller (BJT) effect with superconductivity (SC) is studied for correlated systems, with orbitally degenerate bands using a simple model. The Hubbard model for a doubly degenerate orbital with the on-site intraorbital Coulomb repulsion treated in the slave boson formalism and the interorbital Coulomb repulsion treated in the Hartree-Fock mean field approximation, des…
▽ More
The co-existence of band Jahn-Teller (BJT) effect with superconductivity (SC) is studied for correlated systems, with orbitally degenerate bands using a simple model. The Hubbard model for a doubly degenerate orbital with the on-site intraorbital Coulomb repulsion treated in the slave boson formalism and the interorbital Coulomb repulsion treated in the Hartree-Fock mean field approximation, describes the correlated system. The model further incorporates the BJT interaction and a pairing term to account for the lattice distortion and superconductivity respectively. It is found that structural distortion tends to suppress superconductivity and when SC sets in at low temperatures, the growth of the lattice distortion is arrested. The phase diagram comprising of the SC and structural transition temperatures $T_c$ and $T_s$ versus the dopant concentration $δ$ reveals that the highest obtainable $T_c$ for an optimum do** is limited by structural transition. The dependence of the occupation probabilities of the different bands as well as the density of states (DOS) in the distorted-superconducting phase, on electron correlation has been discussed.
△ Less
Submitted 6 February, 1998;
originally announced February 1998.
-
Mutual influence of structural distortion and superconductivity in systems with degenerate bands
Authors:
Haranath Ghosh,
S. N. Behera,
S. K. Ghatak,
D. K. Ray
Abstract:
The interplay between the band Jahn-Teller distortion and the superconductivity is studied for the system whose Fermi level lies in two-fold degenerate band. Assuming that the lattice distortion is coupled to the orbital electron density and the superconductivity arises due to BCS pairing mechanism between the electrons, the phase diagram is obtained for different do** with respect to half-fil…
▽ More
The interplay between the band Jahn-Teller distortion and the superconductivity is studied for the system whose Fermi level lies in two-fold degenerate band. Assuming that the lattice distortion is coupled to the orbital electron density and the superconductivity arises due to BCS pairing mechanism between the electrons, the phase diagram is obtained for different do** with respect to half-filled band situation. The coexistence phase of superconductivity and distortion occurs within limited range of do** and the distortion lowers the superconducting transition temperature $T_c$. In presence of strong electron-lattice interaction the lattice strain is found to be maximum at half-filling and superconductivity does not appear for low do**. The maximum value of $T_c$ obtainable for an optimum do** is limited by the structural transition temperature $T_s$. The growth of distortion is arrested with the onset of superconductivity and the distortion is found to disappear at lower temperature for some hole density. Such arresting of the growth of distortion at $T_c$ produces discontinuous jump in thermal expansion coefficient. The variation of strain with temperature as well as with do**, thermal expansion coefficient, the $T_c$ vs $δ$ behaviour are in qualitative agreement with recent experimental observations on interplay of distortion and superconductivity in cuprates.
△ Less
Submitted 7 October, 1996;
originally announced October 1996.
