Showing 1–50 of 107 results for author: Gervasi, M

Measuring the CMB spectral distortions with COSMO: the multi-mode antenna system

Authors: E. Manzan, L. Albano, C. Franceschet, E. S. Battistelli, P. de Bernardis, M. Bersanelli, F. Cacciotti, A. Capponi, F. Columbro, G. Conenna, G. Coppi, A. Coppolecchia, G. D'Alessandro, G. De Gasperis, M. De Petris, M. Gervasi, G. Isopi, L. Lamagna, A. Limonta, E. Marchitelli, S. Masi, A. Mennella, F. Montonati, F. Nati, A. Occhiuzzi , et al. (7 additional authors not shown)

Abstract: In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations. COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, b… ▽ More In this work, we present the design and manufacturing of the two multi-mode antenna arrays of the COSMO experiment and the preliminary beam pattern measurements of their fundamental mode compared with simulations. COSMO is a cryogenic Martin-Puplett Fourier Transform Spectrometer that aims at measuring the isotropic y-type spectral distortion of the Cosmic Microwave Background from Antarctica, by performing differential measurements between the sky and an internal, cryogenic reference blackbody. To reduce the atmospheric contribution, a spinning wedge mirror performs fast sky-dips at varying elevations while fast, low-noise Kinetic Inductance detectors scan the interferogram. Two arrays of antennas couple the radiation to the detectors. Each array consists of nine smooth-walled multi-mode feed-horns, operating in the $120-180$ GHz and $210-300$ GHz range, respectively. The multi-mode propagation helps increase the instrumental sensitivity without employing large focal planes with hundreds of detectors. The two arrays have a step-linear and a linear profile, respectively, and are obtained by superimposing aluminum plates made with CNC milling. The simulated multi-mode beam pattern has a $\sim 20^{\circ} - 26^{\circ}$ FWHM for the low-frequency array and $\sim 16^{\circ}$ FWHM for the high-frequency one. The side lobes are below $-15$ dB. To characterize the antenna response, we measured the beam pattern of the fundamental mode using a Vector Network Analyzer, in far-field conditions inside an anechoic chamber at room temperature. We completed the measurements of the low-frequency array and found a good agreement with the simulations. We also identified a few non-idealities that we attribute to the measuring setup and will further investigate. A comprehensive multi-mode measurement will be feasible at cryogenic temperature once the full receiver is integrated. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Comments: To appear in Proceedings of the SPIE Astronomical Telescopes + Instrumentation, 2024

The LiteBIRD mission to explore cosmic inflation

Authors: T. Ghigna, A. Adler, K. Aizawa, H. Akamatsu, R. Akizawa, E. Allys, A. Anand, J. Aumont, J. Austermann, S. Azzoni, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, S. Basak, A. Basyrov, S. Beckman, M. Bersanelli, M. Bortolami, F. Bouchet, T. Brinckmann, P. Campeti, E. Carinos, A. Carones , et al. (134 additional authors not shown)

Abstract: LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive map** of the CMB polarization across the entire sky. During its 3-… ▽ More LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive map** of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$μ$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $δr = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5σ$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Comments: 23 pages, 9 figures, 1 table, SPIE Astronomical Telescopes + Instrumentation 2024

LiteBIRD Science Goals and Forecasts: Primordial Magnetic Fields

Authors: D. Paoletti, J. Rubino-Martin, M. Shiraishi, D. Molinari, J. Chluba, F. Finelli, C. Baccigalupi, J. Errard, A. Gruppuso, A. I. Lonappan, A. Tartari, E. Allys, A. Anand, J. Aumont, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, M. Bersanelli, M. Bortolami, T. Brinckmann, E. Calabrese, P. Campeti, A. Carones, F. J. Casas , et al. (75 additional authors not shown)

Abstract: We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; a… ▽ More We present detailed forecasts for the constraints on primordial magnetic fields (PMFs) that will be obtained with the LiteBIRD satellite. The constraints are driven by the effects of PMFs on the CMB anisotropies: the gravitational effects of magnetically-induced perturbations; the effects on the thermal and ionization history of the Universe; the Faraday rotation imprint on the CMB polarization; and the non-Gaussianities induced in polarization anisotropies. LiteBIRD represents a sensitive probe for PMFs and by exploiting all the physical effects, it will be able to improve the current limit coming from Planck. In particular, thanks to its accurate $B$-mode polarization measurement, LiteBIRD will improve the constraints on infrared configurations for the gravitational effect, giving $B_{\rm 1\,Mpc}^{n_{\rm B} =-2.9} < 0.8$ nG at 95% C.L., potentially opening the possibility to detect nanogauss fields with high significance. We also observe a significant improvement in the limits when marginalized over the spectral index, $B_{1\,{\rm Mpc}}^{\rm marg}< 2.2$ nG at 95% C.L. From the thermal history effect, which relies mainly on $E$-mode polarization data, we obtain a significant improvement for all PMF configurations, with the marginalized case, $\sqrt{\langle B^2\rangle}^{\rm marg}<0.50$ nG at 95% C.L. Faraday rotation constraints will take advantage of the wide frequency coverage of LiteBIRD and the high sensitivity in $B$ modes, improving the limits by orders of magnitude with respect to current results, $B_{1\,{\rm Mpc}}^{n_{\rm B} =-2.9} < 3.2$ nG at 95% C.L. Finally, non-Gaussianities of the $B$-mode polarization can probe PMFs at the level of 1 nG, again significantly improving the current bounds from Planck. Altogether our forecasts represent a broad collection of complementary probes, providing conservative limits on PMF characteristics that will be achieved with LiteBIRD. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Comments: 51 pages, 24 figures, abstract shortened

LSPE-STRIP on-sky calibration strategy using bright celestial sources

Authors: R. T. Génova-Santos, M. Bersanelli, C. Franceschet, M. Gervasi, C. López-Caraballo, L. Mandelli, M. Maris, A. Mennella, J. A. Rubiño-Martín, F. Villa, M. Zannoni, C. Baccigalupi, B. Caccianiga, L. Colombo, F. Cuttaia, F. Farsian, G. Morgante, S. Paradiso, G. Polenta, S. Ricciardi, M. Sandri, A. Taylor, L. Terenzi, M. Tomasi

Abstract: In this paper we describe the global on-sky calibration strategy of the LSPE-Strip instrument. Strip is a microwave telescope operating in the Q- and W-bands (central frequencies of 43 and 95 GHz respectively) from the Observatorio del Teide in Tenerife, with the goal to observe and characterise the polarised Galactic foreground emission, and complement the observations of the polarisation of the… ▽ More In this paper we describe the global on-sky calibration strategy of the LSPE-Strip instrument. Strip is a microwave telescope operating in the Q- and W-bands (central frequencies of 43 and 95 GHz respectively) from the Observatorio del Teide in Tenerife, with the goal to observe and characterise the polarised Galactic foreground emission, and complement the observations of the polarisation of the cosmic microwave background to be performed by the LSPE-SWIPE instrument and other similar experiments operating at higher frequencies to target the detection of the B-mode signal from the inflationary epoch of the Universe. Starting from basic assumptions on some of the instrument parameters (NET, 1/f noise knee frequency, beam properties, observing efficiency) we perform realistic simulations to study the level of accuracy that can be achieved through observations of bright celestial calibrators in the Strip footprint (sky fraction of 30 %) on the determination and characterisation of the main instrument parameters: global and relative gain factors (in intensity and in polarisation), polarisation direction, polarisation efficiency, leakage from intensity to polarisation, beams, window functions and pointing model. △ Less

Submitted 16 January, 2024; v1 submitted 8 January, 2024; originally announced January 2024.

Comments: 46 pages, 20 figures. This paper is part of of the paper series "The LSPE/Strip instrument description and testing", to appear in **st. Comments are welcome

Impact of beam far side-lobe knowledge in the presence of foregrounds for LiteBIRD

Authors: C. Leloup, G. Patanchon, J. Errard, C. Franceschet, J. E. Gudmundsson, S. Henrot-Versillé, H. Imada, H. Ishino, T. Matsumura, G. Puglisi, W. Wang, A. Adler, J. Aumont, R. Aurlien, C. Baccigalupi, M. Ballardini, A. J. Banday, R. B. Barreiro, N. Bartolo, A. Basyrov, M. Bersanelli, D. Blinov, M. Bortolami, T. Brinckmann, P. Campeti , et al. (86 additional authors not shown)

Abstract: We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the dat… ▽ More We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $δr$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $σ\left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $δr$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $δr$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $δr < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD. △ Less

Submitted 14 December, 2023; originally announced December 2023.

LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing

Authors: T. Namikawa, A. I. Lonappan, C. Baccigalupi, N. Bartolo, D. Beck, K. Benabed, A. Challinor, P. Diego-Palazuelos, J. Errard, S. Farrens, A. Gruppuso, N. Krachmalnicoff, M. Migliaccio, E. Martínez-González, V. Pettorino, G. Piccirilli, M. Ruiz-Granda, B. Sherwin, J. Starck, P. Vielva, R. Akizawa, A. Anand, J. Aumont, R. Aurlien, S. Azzoni , et al. (97 additional authors not shown)

Abstract: We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become mo… ▽ More We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Comments: 21 pages, 7 figures

LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB

Authors: A. I. Lonappan, T. Namikawa, G. Piccirilli, P. Diego-Palazuelos, M. Ruiz-Granda, M. Migliaccio, C. Baccigalupi, N. Bartolo, D. Beck, K. Benabed, A. Challinor, J. Errard, S. Farrens, A. Gruppuso, N. Krachmalnicoff, E. Martínez-González, V. Pettorino, B. Sherwin, J. Starck, P. Vielva, R. Akizawa, A. Anand, J. Aumont, R. Aurlien, S. Azzoni , et al. (97 additional authors not shown)

Abstract: We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map u… ▽ More We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,μ$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere. △ Less

Submitted 8 December, 2023; originally announced December 2023.

LiteBIRD Science Goals and Forecasts. A Case Study of the Origin of Primordial Gravitational Waves using Large-Scale CMB Polarization

Authors: P. Campeti, E. Komatsu, C. Baccigalupi, M. Ballardini, N. Bartolo, A. Carones, J. Errard, F. Finelli, R. Flauger, S. Galli, G. Galloni, S. Giardiello, M. Hazumi, S. Henrot-Versillé, L. T. Hergt, K. Kohri, C. Leloup, J. Lesgourgues, J. Macias-Perez, E. Martínez-González, S. Matarrese, T. Matsumura, L. Montier, T. Namikawa, D. Paoletti , et al. (85 additional authors not shown)

Abstract: We study the possibility of using the $LiteBIRD$ satellite $B$-mode survey to constrain models of inflation producing specific features in CMB angular power spectra. We explore a particular model example, i.e. spectator axion-SU(2) gauge field inflation. This model can source parity-violating gravitational waves from the amplification of gauge field fluctuations driven by a pseudoscalar "axionlike… ▽ More We study the possibility of using the $LiteBIRD$ satellite $B$-mode survey to constrain models of inflation producing specific features in CMB angular power spectra. We explore a particular model example, i.e. spectator axion-SU(2) gauge field inflation. This model can source parity-violating gravitational waves from the amplification of gauge field fluctuations driven by a pseudoscalar "axionlike" field, rolling for a few e-folds during inflation. The sourced gravitational waves can exceed the vacuum contribution at reionization bump scales by about an order of magnitude and can be comparable to the vacuum contribution at recombination bump scales. We argue that a satellite mission with full sky coverage and access to the reionization bump scales is necessary to understand the origin of the primordial gravitational wave signal and distinguish among two production mechanisms: quantum vacuum fluctuations of spacetime and matter sources during inflation. We present the expected constraints on model parameters from $LiteBIRD$ satellite simulations, which complement and expand previous studies in the literature. We find that $LiteBIRD$ will be able to exclude with high significance standard single-field slow-roll models, such as the Starobinsky model, if the true model is the axion-SU(2) model with a feature at CMB scales. We further investigate the possibility of using the parity-violating signature of the model, such as the $TB$ and $EB$ angular power spectra, to disentangle it from the standard single-field slow-roll scenario. We find that most of the discriminating power of $LiteBIRD$ will reside in $BB$ angular power spectra rather than in $TB$ and $EB$ correlations. △ Less

Submitted 1 December, 2023; originally announced December 2023.

Comments: 22 pages, 13 figures. Submitted to JCAP

Measuring the CMB primordial B-modes with Bolometric Interferometry

Authors: A. Mennella, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, F. Cacciotti, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, L. Colombo, F. Columbro, A. Coppolecchia , et al. (89 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest fo… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of Δν/ν \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects. △ Less

Submitted 5 November, 2023; originally announced November 2023.

Comments: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

The advantage of Bolometric Interferometry for controlling Galactic foreground contamination in CMB primordial B-modes measurements

Authors: E. Manzan, M. Regnier, J-Ch. Hamilton, A. Mennella, J. Errard, L. Zapelli, S. A. Torchinsky, S. Paradiso, E. Battistelli, M. Bersanelli, P. De Bernardis, M. De Petris, G. D'Alessandro, M. Gervasi, S. Masi, M. Piat, E. Rasztocky, G. E Romero, C. G. Scoccola, M. Zannoni, the QUBIC Collaboration

Abstract: In the quest for the faint primordial B-mode polarization of the Cosmic Microwave Background, three are the key requirements for any present or future experiment: an utmost sensitivity, excellent control over instrumental systematic effects and over Galactic foreground contamination. Bolometric Interferometry (BI) is a novel technique that matches them all by combining the sensitivity of bolometri… ▽ More In the quest for the faint primordial B-mode polarization of the Cosmic Microwave Background, three are the key requirements for any present or future experiment: an utmost sensitivity, excellent control over instrumental systematic effects and over Galactic foreground contamination. Bolometric Interferometry (BI) is a novel technique that matches them all by combining the sensitivity of bolometric detectors, the control of instrumental systematics from interferometry and a software-based, tunable, in-band spectral resolution due to its ability to perform band-splitting during data analysis (spectral imaging). In this paper, we investigate how the spectral imaging capability of BI can help in detecting residual contamination in case an over-simplified model of foreground emission is assumed in the analysis. To mimic this situation, we focus on the next generation of ground-based CMB experiment, CMB-S4, and compare its anticipated sensitivities, frequency and sky coverage with a hypothetical version of the same experiment based on BI, CMB-S4/BI, assuming that line-of-sight (LOS) frequency decorrelation is present in dust emission but is not accounted for during component separation. We show results from a Monte-Carlo analysis based on a parametric component separation method (FGBuster), highlighting how BI has the potential to diagnose the presence of foreground residuals in estimates of the tensor-to-scalar ratio $r$ in the case of unaccounted Galactic dust LOS frequency decorrelation. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Comments: To appear in Proc. of the mm Universe 2023 conference, Grenoble (France), June 2023, published by F. Mayet et al. (Eds), EPJ Web of conferences, EDP Sciences

Identifying frequency decorrelated dust residuals in B-mode maps by exploiting the spectral capability of bolometric interferometry

Authors: M. Regnier, E. Manzan, J. -Ch Hamilton, A. Mennella, J. Errard, L. Zapelli, S. A. Torchinsky, S. Paradiso, E. Battistelli, P. De Bernardis, L. Colombo, M. De Petris, G. D'Alessandro, B. Garcia, M. Gervasi, S. Masi, L. Mousset, N. Miron Granese, C. O'Sullivan, M. Piat, E. Rasztocky, G. E. Romero, C. G. Scoccola, M. Zannoni

Abstract: Astrophysical polarized foregrounds represent the most critical challenge in Cosmic Microwave Background (CMB) B-mode experiments. Multi-frequency observations can be used to constrain astrophysical foregrounds to isolate the CMB contribution. However, recent observations indicate that foreground emission may be more complex than anticipated. We investigate how the increased spectral resolution… ▽ More Astrophysical polarized foregrounds represent the most critical challenge in Cosmic Microwave Background (CMB) B-mode experiments. Multi-frequency observations can be used to constrain astrophysical foregrounds to isolate the CMB contribution. However, recent observations indicate that foreground emission may be more complex than anticipated. We investigate how the increased spectral resolution provided by band splitting in Bolometric Interferometry (BI) through a technique called spectral imaging can help control the foreground contamination in the case of unaccounted Galactic dust frequency decorrelation along the line-of-sight. We focus on the next generation ground-based CMB experiment CMB-S4, and compare its anticipated sensitivities, frequency and sky coverage with a hypothetical version of the same experiment based on BI. We perform a Monte-Carlo analysis based on parametric component separation methods (FGBuster and Commander) and compute the likelihood on the recovered tensor-to-scalar ratio. The main result of this analysis is that spectral imaging allows us to detect systematic uncertainties on r from frequency decorrelation when this effect is not accounted for in component separation. Conversely, an imager would detect a biased value of r and would be unable to spot the presence of a systematic effect. We find a similar result in the reconstruction of the dust spectral index, where we show that with BI we can measure more precisely the dust spectral index also when frequency decorrelation is present. The in-band frequency resolution provided by BI allows us to identify dust LOS frequency decorrelation residuals where an imager of similar performance would fail. This opens the prospect to exploit this potential in the context of future CMB polarization experiments that will be challenged by complex foregrounds in their quest for B-modes detection. △ Less

Submitted 21 February, 2024; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 13 Pages, 15 figures, 4 tables. Accepted by A&A

Journal ref: A&A 686, A271 (2024)

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

Authors: U. Fuskeland, J. Aumont, R. Aurlien, C. Baccigalupi, A. J. Banday, H. K. Eriksen, J. Errard, R. T. Génova-Santos, T. Hasebe, J. Hubmayr, H. Imada, N. Krachmalnicoff, L. Lamagna, G. Pisano, D. Poletti, M. Remazeilles, K. L. Thompson, L. Vacher, I. K. Wehus, S. Azzoni, M. Ballardini, R. B. Barreiro, N. Bartolo, A. Basyrov, D. Beck , et al. (92 additional authors not shown)

Abstract: LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertaint… ▽ More LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $δr$, down to $δr<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $χ^2$ sensitivity. (abridged) △ Less

Submitted 15 August, 2023; v1 submitted 10 February, 2023; originally announced February 2023.

Comments: 18 pages, 13 figures. Published in A&A

Journal ref: A&A 676, A42 (2023)

Status of QUBIC, the Q&U Bolometer for Cosmology

Authors: L. Mousset, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, S. Colombo, F. Columbro, A. Coppolecchia, B. Costanza , et al. (86 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: Contribution to the 2022 Cosmology session of the 33rd Rencontres de Blois. arXiv admin note: substantial text overlap with arXiv:2203.08947

Spectra of Cosmic Ray Sodium and Aluminum and Unexpected Aluminum Excess

Authors: M. J. Boschini, S. Della Torre, M. Gervasi, D. Grandi, G. Johannesson, G. La Vacca, N. Masi, I. V. Moskalenko, S. Pensotti, T. A. Porter, L. Quadrani, P. G. Rancoita, D. Rozza, M. Tacconi

Abstract: Since its launch, the Alpha Magnetic Spectrometer-02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei (H-Si, Fe), which resulted in a number of breakthroughs. The most recent AMS-02 result is the measurement of the spectra of CR sodium and aluminum up to $\sim$2 TV. Given their low solar system abundances, a signifi… ▽ More Since its launch, the Alpha Magnetic Spectrometer-02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei (H-Si, Fe), which resulted in a number of breakthroughs. The most recent AMS-02 result is the measurement of the spectra of CR sodium and aluminum up to $\sim$2 TV. Given their low solar system abundances, a significant fraction of each element is produced in fragmentations of heavier species, predominantly Ne, Mg, and Si. In this paper, we use precise measurements of the sodium and aluminum spectra by AMS-02 together with ACE-CRIS and Voyager 1 data to test their origin. We show that the sodium spectrum agrees well with the predictions made with the GalProp-HelMod framework, while aluminum spectrum shows a significant excess in the rigidity range from 2-7 GV. In this context, we discuss the origin of other low-energy excesses in Li, F, and Fe found earlier. The observed excesses in Li, F, and Al appear to be consistent with the local Wolf-Rayet (WR) stars hypothesis, invoked to reproduce anomalous $^{22}$Ne/$^{20}$Ne, $^{12}$C/$^{16}$O, and $^{58}$Fe/$^{56}$Fe ratios in CRs, while excess in Fe is likely connected with a past SN activity in the solar neighborhood. We also provide updated local interstellar spectra (LIS) of sodium and aluminum in the rigidity range from few MV to $\sim$2 TV. Our calculations employ the self-consistent GalProp-HelMod framework that has proved to be a reliable tool in deriving the LIS of CR $\bar{p}$, $e^{-}$, and nuclei $Z\le28$. △ Less

Submitted 16 May, 2022; v1 submitted 20 February, 2022; originally announced February 2022.

Comments: 19 pages, 16 figures, 11 tables; ApJ in press

Journal ref: ApJ 933 (2022) 147

Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey

Authors: LiteBIRD Collaboration, E. Allys, K. Arnold, J. Aumont, R. Aurlien, S. Azzoni, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, N. Bartolo, L. Bautista, D. Beck, S. Beckman, M. Bersanelli, F. Boulanger, M. Brilenkov, M. Bucher, E. Calabrese, P. Campeti, A. Carones, F. J. Casas, A. Catalano, V. Chan, K. Cheung , et al. (166 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects. △ Less

Submitted 27 March, 2023; v1 submitted 6 February, 2022; originally announced February 2022.

Comments: 155 pages, accepted for publication in PTEP

Polarization angle requirements for CMB B-mode experiments. Application to the LiteBIRD satellite

Authors: P. Vielva, E. Martínez-González, F. J. Casas, T. Matsumura, S. Henrot-Versillé, E. Komatsu, J. Aumont, R. Aurlien, C. Baccigalupi, A. J. Banday, R. B. Barreiro, N. Bartolo, E. Calabrese, K. Cheung, F. Columbro, A. Coppolecchia, P. de Bernardis, T. de Haan, E. de la Hoz, M. De Petris, S. Della Torre, P. Diego-Palazuelos, H. K. Eriksen, J. Errard, F. Finelli , et al. (46 additional authors not shown)

Abstract: A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polar… ▽ More A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polarization signal. In addition, assuming that the uncertainties on the polarization angle are in the small angle limit (lower than a few degrees), it is possible to derive analytic expressions to establish the requirements. The methodology also accounts for possible correlations among detectors, that may originate from the optics, wafers, etc. The approach is applied to the LiteBIRD space mission. We show that, for the most restrictive case (i.e., full correlation of the polarization angle systematics among detector sets), the requirements on the polarization angle uncertainties are of around 1 arcmin at the most sensitive frequency bands (i.e., $\approx 150$ GHz) and of few tens of arcmin at the lowest (i.e., $\approx 40$ GHz) and highest (i.e., $\approx 400$ GHz) observational bands. Conversely, for the least restrictive case (i.e., no correlation of the polarization angle systematics among detector sets), the requirements are $\approx 5$ times less restrictive than for the previous scenario. At the global and the telescope levels, polarization angle knowledge of a few arcmins is sufficient for correlated global systematic errors and can be relaxed by a factor of two for fully uncorrelated errors in detector polarization angle. The reported uncertainty levels are needed in order to have the bias on $r$ due to systematics below the limit established by the LiteBIRD collaboration. △ Less

Submitted 18 April, 2022; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: 26 pages, 6 figures. Minor changes to match the final version in JCAP

Total power horn-coupled 150 GHz LEKID array for space applications

Authors: A. Paiella, A. Coppolecchia, P. de Bernardis, S. Masi, A. Cruciani, L. Lamagna, G. Pettinari, F. Piacentini, M. Bersanelli, F. Cavaliere, C. Franceschet, M. Gervasi, A. Limonta, S. Mandelli, E. Manzan, A. Mennella, A. Passerini, E. Tommasi, A. Volpe, M. Zannoni

Abstract: We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated… ▽ More We have developed two arrays of lumped element kinetic inductance detectors working in the D-band, and optimised for the low radiative background conditions of a satellite mission aiming at precision measurements of the Cosmic Microwave Background (CMB). The first detector array is sensitive to the total power of the incoming radiation to which is coupled via single-mode waveguides and corrugated feed-horns, while the second is sensitive to the polarisation of the radiation thanks to orthomode transducers. Here, we focus on the total power detector array, which is suitable, for instance, for precision measurements of unpolarised spectral distortions of the CMB, where detecting both polarisations provides a sensitivity advantage. We describe the optimisation of the array design, fabrication and packaging, the dark and optical characterisation, and the performance of the black-body calibrator used for the optical tests. We show that almost all the detectors of the array are photon-noise limited under the radiative background of a 3.6 K black-body. This result, combined with the weak sensitivity to cosmic rays hits demonstrated with the OLIMPO flight, validates the idea of using lumped elements kinetic inductance detectors for precision, space-based CMB missions. △ Less

Submitted 10 June, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: To be submitted to JCAP

The COSmic Monopole Observer (COSMO)

Authors: S. Masi, E. Battistelli, P. de Bernardis, A. Coppolecchia, F. Columbro, G. D'Alessandro, M. De Petris, L. Lamagna, E. Marchitelli, L. Mele, A. Paiella, F. Piacentini, G. Pisano, M. Bersanelli, C. Franceschet, E. Manzan, D. Mennella, S. Realini, S. Cibella, F. Martini, G. Pettinari, G. Coppi, M. Gervasi, A. Limonta, M. Zannoni , et al. (2 additional authors not shown)

Abstract: The COSmic Monopole Observer (COSMO) is an experiment to measure low-level spectral distortions in the isotropic component of the Cosmic Microwave Background (CMB). Deviations from a pure blackbody spectrum are expected at low level ($<$ 1 ppm) due to several astrophysical and cosmological phenomena, and promise to provide important independent information on the early and late phases of the unive… ▽ More The COSmic Monopole Observer (COSMO) is an experiment to measure low-level spectral distortions in the isotropic component of the Cosmic Microwave Background (CMB). Deviations from a pure blackbody spectrum are expected at low level ($<$ 1 ppm) due to several astrophysical and cosmological phenomena, and promise to provide important independent information on the early and late phases of the universe. They have not been detected yet, due to the extreme accuracy required, the best upper limits being still those from the COBE-FIRAS mission. COSMO is based on a cryogenic differential Fourier Transform Spectrometer, measuring the spectral brightness difference between the sky and an accurate cryogenic blackbody. The first implementation of COSMO, funded by the Italian PRIN and PNRA programs, will operate from the Concordia station at Dome-C, in Antarctica, and will take advantage of a fast sky-dip technique to get rid of atmospheric emission and its fluctuations, separating them from the monopole component of the sky brightness. Here we describe the instrument design, its capabilities, the current status. We also discuss its subsequent implementation in a balloon-flight, which has been studied within the COSMOS program of the Italian Space Agency. △ Less

Submitted 23 October, 2021; originally announced October 2021.

Comments: To be published on the proceedings of the 16th Marcel Grossmann Meeting on Recent Developments in Theoretical and Experimental General Relativity, Astrophysics and Relativistic Field Theories (MG16) - 5-9 July 2021. Online Conference, Italy - http://www.icra.it/mg/mg16/

Representations of epistemic uncertainty and awareness in data-driven strategies

Authors: Mario Angelelli, Massimiliano Gervasi

Abstract: The diffusion of AI and big data is resha** decision-making processes by increasing the amount of information that supports decisions while reducing direct interaction with data and empirical evidence. This paradigm shift introduces new sources of uncertainty, as limited data observability results in ambiguity and a lack of interpretability. The need for the proper analysis of data-driven strate… ▽ More The diffusion of AI and big data is resha** decision-making processes by increasing the amount of information that supports decisions while reducing direct interaction with data and empirical evidence. This paradigm shift introduces new sources of uncertainty, as limited data observability results in ambiguity and a lack of interpretability. The need for the proper analysis of data-driven strategies motivates the search for new models that can describe this type of bounded access to knowledge. This contribution presents a novel theoretical model for uncertainty in knowledge representation and its transfer mediated by agents. We provide a dynamical description of knowledge states by endowing our model with a structure to compare and combine them. Specifically, an update is represented through combinations, and its explainability is based on its consistency in different dimensional representations. We look at inequivalent knowledge representations in terms of multiplicity of inferences, preference relations, and information measures. Furthermore, we define a formal analogy with two scenarios that illustrate non-classical uncertainty in terms of ambiguity (Ellsberg's model) and reasoning about knowledge mediated by other agents observing data (Wigner's friend). Finally, we discuss some implications of the proposed model for data-driven strategies, with special attention to reasoning under uncertainty about business value dimensions and the design of measurement tools for their assessment. △ Less

Submitted 19 November, 2023; v1 submitted 21 October, 2021; originally announced October 2021.

Comments: 32 pages, 4 figures. Improved exposition and corrected misprints. Comments are welcome!

The LSPE-Strip feed horn array

Authors: C. Franceschet, F. Del Torto, F. Villa, S. Realini, R. Bongiolatti, O. A. Peverini, F. Pezzotta, D. M. Viganó, G. Addamo, M. Bersanelli, F. Cavaliere, F. Cuttaia, M. Gervasi, A. Mennella, G. Morgante, A. C. Taylor, G. Virone, M. Zannoni

Abstract: In this paper we discuss the design, manufacturing and characterization of the feed horn array of the Strip instrument of the Large Scale Polarization Explorer (LSPE) experiment. Strip is a microwave telescope, operating in the Q- and W-band, for the observation of the polarized emissions from the sky in a large fraction (about 37%) of the Northern hemisphere with subdegree angular resolution. The… ▽ More In this paper we discuss the design, manufacturing and characterization of the feed horn array of the Strip instrument of the Large Scale Polarization Explorer (LSPE) experiment. Strip is a microwave telescope, operating in the Q- and W-band, for the observation of the polarized emissions from the sky in a large fraction (about 37%) of the Northern hemisphere with subdegree angular resolution. The Strip focal plane is populated by forty-nine Q-band and six W-band corrugated horns, each feeding a cryogenically cooled polarimeter for the detection of the Stokes $Q$ and $U$ components of the polarized signal from the sky. The Q-band channel is designed to accurately monitor Galactic polarized synchrotron emission, while the combination of Q- and W-band will allow the study of atmospheric effects at the observation site, the Observatorio del Teide, in Tenerife. In this paper we focus on the development of the Strip corrugated feed horns, including design requirements, engineering and manufacturing, as well as detailed characterization and performance verification. △ Less

Submitted 1 December, 2021; v1 submitted 29 July, 2021; originally announced July 2021.

Comments: Version 1: This paper (28 pages, 25 figures) is part of the Special Issue "The LSPE/Strip instrument description and testing", being submitted to JINST. Version 2: Added new references. Splitting of design and specifications tables in Sec. 2.1. Other minor revisions included

A Hint of a Low-Energy Excess in Cosmic-Ray Fluorine

Authors: M. J. Boschini, S. Della Torre, M. Gervasi, D. Grandi, G. Johannesson, G. La Vacca, N. Masi, I. V. Moskalenko, S. Pensotti, T. A. Porter, L. Quadrani, P. G. Rancoita, D. Rozza, M. Tacconi

Abstract: Since its launch, the Alpha Magnetic Spectrometer-02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei (H--O, Ne, Mg, Si, Fe), which resulted in a number of breakthroughs. The most recent AMS-02 result is the measurement of the spectrum of CR fluorine up to $\sim$2 TV. Given its very low solar system abundance, fluor… ▽ More Since its launch, the Alpha Magnetic Spectrometer-02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei (H--O, Ne, Mg, Si, Fe), which resulted in a number of breakthroughs. The most recent AMS-02 result is the measurement of the spectrum of CR fluorine up to $\sim$2 TV. Given its very low solar system abundance, fluorine in CRs is thought to be mostly secondary, produced in fragmentations of heavier species, predominantly Ne, Mg, and Si. Similar to the best-measured secondary-to-primary boron to carbon nuclei ratio that is widely used to study the origin and propagation of CR species, the precise fluorine data would allow the origin of Si-group nuclei to be studied independently. Meanwhile, the secondary origin of CR fluorine has never been tested in a wide energy range due to the lack of accurate CR data. In this paper, we use the first ever precise measurements of the fluorine spectrum by AMS-02 together with ACE-CRIS and Voyager 1 data to actually test this paradigm. Our detailed modeling shows an excess below 10 GV in the fluorine spectrum that may hint at a primary fluorine component. We also provide an updated local interstellar spectrum (LIS) of fluorine in the rigidity range from few MV to $\sim$2 TV. Our calculations employ the self-consistent GalProp-HelMod framework that has proved to be a reliable tool in deriving the LIS of CR $\bar{p}$, $e^{-}$, and nuclei $Z\le28$. △ Less

Submitted 11 October, 2021; v1 submitted 3 June, 2021; originally announced June 2021.

Comments: 14 pages, 10 figures, 8 tables; ApJ in press

Journal ref: ApJ 925 (2022) 108

Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission

Authors: L. Montier, B. Mot, P. de Bernardis, B. Maffei, G. Pisano, F. Columbro, J. E. Gudmundsson, S. Henrot-Versillé, L. Lamagna, J. Montgomery, T. Prouvé, M. Russell, G. Savini, S. Stever, K. L. Thompson, M. Tsujimoto, C. Tucker, B. Westbrook, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien , et al. (212 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular… ▽ More LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: SPIE Conference

Journal ref: Proc. of SPIE Vol. 11443 14432G (2020)

A discovery of a low-energy excess in cosmic-ray iron: an evidence of the past supernova activity in the Local Bubble

Authors: M. J. Boschini, S. Della Torre, M. Gervasi, D. Grandi, G. Johannesson, G. La Vacca, N. Masi, I. V. Moskalenko, S. Pensotti, T. A. Porter, L. Quadrani, P. G. Rancoita, D. Rozza, M. Tacconi

Abstract: Since its launch, the Alpha Magnetic Spectrometer - 02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei, $_1$H-$_8$O, $_{10}$Ne, $_{12}$Mg, $_{14}$Si, which resulted in a number of breakthroughs. One of the latest long awaited surprises is the spectrum of $_{26}$Fe just published by AMS-02. Because of the large frag… ▽ More Since its launch, the Alpha Magnetic Spectrometer - 02 (AMS-02) has delivered outstanding quality measurements of the spectra of cosmic-ray (CR) species, $\bar{p}$, $e^{\pm}$, and nuclei, $_1$H-$_8$O, $_{10}$Ne, $_{12}$Mg, $_{14}$Si, which resulted in a number of breakthroughs. One of the latest long awaited surprises is the spectrum of $_{26}$Fe just published by AMS-02. Because of the large fragmentation cross section and large ionization energy losses, most of CR iron at low energies is local, and may harbor some features associated with relatively recent supernova (SN) activity in the solar neighborhood. Our analysis of new iron spectrum together with Voyager 1 and ACE-CRIS data reveals an unexpected bump in the iron spectrum and in the Fe/He, Fe/O, and Fe/Si ratios at 1-2 GV, while a similar feature in the spectra of He, O, Si, and in their ratios is absent, hinting at a local source of low-energy CRs. The found excess fits well with recent discoveries of radioactive $^{60}$Fe deposits in terrestrial and lunar samples, and in CRs. We provide an updated local interstellar spectrum (LIS) of iron in the energy range from 1 MeV nucleon$^{-1}$ to $\sim$10 TeV nucleon$^{-1}$. Our calculations employ the GalProp-HelMod framework that is proved to be a reliable tool in deriving the LIS of CR $\bar{p}$, $e^{-}$, and nuclei $Z\le28$. △ Less

Submitted 22 March, 2021; v1 submitted 29 January, 2021; originally announced January 2021.

Comments: 12 pages, 9 figures, 5 tables; Accepted for publication in the Astrophysical Journal. arXiv admin note: text overlap with arXiv:2006.01337

Journal ref: The Astrophysical Journal 913 (2021) 5

LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization

Authors: M. Hazumi, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banjeri, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (213 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Comments: 20 pages, 9 figures

Journal ref: Proc. of SPIE Vol. 11443 114432F (2020)

QUBIC IV: Performance of TES Bolometers and Readout Electronics

Authors: M. Piat, G. Stankowiak, E. S. Battistelli, P. de Bernardis, G. D Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, T. D. Hoang, S. Marnieros, S. Masi, A. Mennella, L. Mousset, C. O Sullivan, D. Prele, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi , et al. (104 additional authors not shown)

Abstract: A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are… ▽ More A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry. △ Less

Submitted 20 October, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: Accepted for publication in JCAP

Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD

Authors: Y. Sekimoto, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (212 additional authors not shown)

Abstract: LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li… ▽ More LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: 21 pages, 14 figures

Journal ref: SPIE proceedings 1145310 (2020)

QUBIC I: Overview and ScienceProgram

Authors: J. -Ch. Hamilton, L. Mousset, E. S. Battistelli, M. -A. Bigot-Sazy, P. Chanial, R. Charlassier, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, L. Grandsire, S. Lau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Riccardi, C. Scóccola, M. Stolpovskiy, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (105 additional authors not shown)

Abstract: The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo… ▽ More The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$. △ Less

Submitted 26 August, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Authors: L. Mousset, M. M. Gamboa Lerena, E. S. Battistelli, P. de Bernardis, P. Chanial, G. D'Alessandro, G. Dashyan, M. De Petris, L. Grandsire, J. -Ch. Hamilton, F. Incardona, S. Landau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Ricciardi, C. G. Scóccola, M. Stolpovskiy, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (106 additional authors not shown)

Abstract: Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg… ▽ More Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust map** and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC. △ Less

Submitted 28 March, 2022; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

QUBIC VII: The feedhorn-switch system of the technological demonstrator

Authors: F. Cavaliere, A. Mennella, M. Zannoni, P. Battaglia, E. S. Battistelli, D. Burke, G. D'Alessandro, P. de Bernardis, M. De Petris, C. Franceschet, L. Grandsire, J. -Ch. Hamilton, B. Maffei, E. Manzan, S. Marnieros, S. Masi, C. O'Sullivan, A. Passerini, F. Pezzotta, M. Piat, A. Tartari, S. A. Torchinsky, D. Viganò, F. Voisin, P. Ade , et al. (106 additional authors not shown)

Abstract: We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration… ▽ More We present the design, manufacturing and performance of the horn-switch system developed for the technological demonstrator of QUBIC (the $Q$\&$U$ Bolometric Interferometer for Cosmology). This system is constituted of 64 back-to-back dual-band (150\,GHz and 220\,GHz) corrugated feed-horns interspersed with mechanical switches used to select desired baselines during the instrument self-calibration. We manufactured the horns in aluminum platelets milled by photo-chemical etching and mechanically tightened with screws. The switches are based on steel blades that open and close the wave-guide between the back-to-back horns and are operated by miniaturized electromagnets. We also show the current development status of the feedhorn-switch system for the QUBIC full instrument, based on an array of 400 horn-switch assemblies. △ Less

Submitted 1 April, 2022; v1 submitted 28 August, 2020; originally announced August 2020.

Comments: 30 pages, 28 figures. Accepted for submission to JCAP

The large scale polarization explorer (LSPE) for CMB measurements: performance forecast

Authors: The LSPE collaboration, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. S. Battistelli, A. Baù, P. de Bernardis, M. Bersanelli, M. Biasotti, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, F. Cuttaia, G. D'Alessandro, G. De Gasperis, M. De Petris, V. Fafone , et al. (80 additional authors not shown)

Abstract: [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear… ▽ More [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters. △ Less

Submitted 9 August, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: Submitted to JCAP. Abstract abridged for arXiv submission

Journal ref: Journal of Cosmology and Astroparticle Physics, Volume 2021, August 2021

QUBIC VI: cryogenic half wave plate rotator, design and performances

Authors: G. D'Alessandro, L. Mele, F. Columbro, G. Amico, E. S. Battistelli, P. de Bernardis, A. Coppolecchia, M. De Petris, L. Grandsire, J. -Ch. Hamilton, L. Lamagna, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, G. Pisano, G. Presta, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (104 additional authors not shown)

Abstract: Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used t… ▽ More Inflation Gravity Waves B-Modes polarization detection is the ultimate goal of modern large angular scale cosmic microwave background (CMB) experiments around the world. A big effort is undergoing with the deployment of many ground-based, balloon-borne and satellite experiments using different methods to separate this faint polarized component from the incoming radiation. One of the largely used technique is the Stokes Polarimetry that uses a rotating half-wave plate (HWP) and a linear polarizer to separate and modulate the polarization components with low residual cross-polarization. This paper describes the QUBIC Stokes Polarimeter highlighting its design features and its performances. A common systematic with these devices is the generation of large spurious signals synchronous with the rotation and proportional to the emissivity of the optical elements. A key feature of the QUBIC Stokes Polarimeter is to operate at cryogenic temperature in order to minimize this unwanted component. Moving efficiently this large optical element at low temperature constitutes a big engineering challenge in order to reduce friction power dissipation. Big attention has been given during the designing phase to minimize the differential thermal contractions between parts. The rotation is driven by a stepper motor placed outside the cryostat to avoid thermal load dissipation at cryogenic temperature. The tests and the results presented in this work show that the QUBIC polarimeter can easily achieve a precision below 0.1° in positioning simply using the stepper motor precision and the optical absolute encoder. The rotation induces only few mK of extra power load on the second cryogenic stage (~ 8 K). △ Less

Submitted 19 November, 2020; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be submitted to a special issue of JCAP

QUBIC V: Cryogenic system design and performance

Authors: S. Masi, E. S. Battistelli, P. de Bernardis, C. Chapron, F. Columbro, G. D'Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, L. Mele, A. May, A. Mennella, C. O'Sullivan, A. Paiella, F. Piacentini, M. Piat, L. Piccirillo, G. Presta, A. Schillaci, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (104 additional authors not shown)

Abstract: Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interfe… ▽ More Current experiments aimed at measuring the polarization of the Cosmic Microwave Background (CMB) use cryogenic detector arrays and cold optical systems to boost the map** speed of the sky survey. For these reasons, large volume cryogenic systems, with large optical windows, working continuously for years, are needed. Here we report on the cryogenic system of the QUBIC (Q and U Bolometric Interferometer for Cosmology) experiment: we describe its design, fabrication, experimental optimization and validation in the Technological Demonstrator configuration. The QUBIC cryogenic system is based on a large volume cryostat, using two pulse-tube refrigerators to cool at ~3K a large (~1 m^3) volume, heavy (~165kg) instrument, including the cryogenic polarization modulator, the corrugated feedhorns array, and the lower temperature stages; a 4He evaporator cooling at ~1K the interferometer beam combiner; a 3He evaporator cooling at ~0.3K the focal-plane detector arrays. The cryogenic system has been tested and validated for more than 6 months of continuous operation. The detector arrays have reached a stable operating temperature of 0.33K, while the polarization modulator has been operated from a ~10K base temperature. The system has been tilted to cover the boresight elevation range 20 deg -90 deg without significant temperature variations. The instrument is now ready for deployment to the high Argentinean Andes. △ Less

Submitted 25 August, 2021; v1 submitted 24 August, 2020; originally announced August 2020.

Comments: This is one of a series of papers on the QUBIC experiment status - This version of the paper matches the one accepted for publication on Journal of Cosmology and Astroparticle Physics

QUBIC VIII: Optical design and performance

Authors: C. O'Sullivan, M. De Petris, G. Amico, E. S. Battistelli, D. Burke, D. Buzi, C. Chapron, L. Conversi, G. D'Alessandro, P. de Bernardis, M. De Leo, D. Gayer, L. Grandsire, J. -Ch. Hamilton, S. Marnieros, S. Masi, A. Mattei, A. Mennella, L. Mousset, J. D. Murphy, A. Pelosi, M. Perciballi, M. Piat, S. Scully, A. Tartari , et al. (104 additional authors not shown)

Abstract: The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or p… ▽ More The Q and U Bolometric Interferometer for Cosmology (QUBIC) is a ground-based experiment that aims to detect B-mode polarisation anisotropies in the CMB at angular scales around the l=100 recombination peak. Systematic errors make ground-based observations of B modes at millimetre wavelengths very challenging and QUBIC mitigates these problems in a somewhat complementary way to other existing or planned experiments using the novel technique of bolometric interferometry. This technique takes advantage of the sensitivity of an imager and the systematic error control of an interferometer. A cold reflective optical combiner superimposes there-emitted beams from 400 aperture feedhorns on two focal planes. A shielding system composedof a fixed groundshield, and a forebaffle that moves with the instrument, limits the impact of local contaminants. The modelling, design, manufacturing and preliminary measurements of the optical components are described in this paper. △ Less

Submitted 25 August, 2021; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC to be published in a special issue of JCAP. Accepted for publication

QUBIC III: Laboratory Characterization

Authors: S. A. Torchinsky, J. -Ch. Hamilton, M. Piat, E. S. Battistelli, C. Chapron, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, M. González, L. Grandsire, S. Masi, S. Marnieros, A. Mennella, L. Mousset, J. D. Murphy, D. Prêle, G. Stankowiak, C. O'Sullivan, A. Tartari, J. -P. Thermeau, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro , et al. (103 additional authors not shown)

Abstract: A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam,… ▽ More A prototype version of the Q & U Bolometric Interferometer for Cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology in Paris. We report the results of this Technological Demonstrator which successfully shows the feasibility of the principle of Bolometric Interferometry. Characterization of QUBIC includes the measurement of the synthesized beam, the measurement of interference fringes, and the measurement of polarization performance. A modulated and frequency tunable millimetre-wave source in the telescope far-field is used to simulate a point source. The QUBIC pointing is scanned across the point source to produce beam maps. Polarization modulation is measured using a rotating Half Wave Plate. The measured beam matches well to the theoretical simulations and gives QUBIC the ability to do spectro imaging. The polarization performance is excellent with less than 0.5\% cross-polarization rejection. QUBIC is ready for deployment on the high altitude site at Alto Chorillo, Argentina to begin scientific operations. △ Less

Submitted 15 March, 2022; v1 submitted 23 August, 2020; originally announced August 2020.

Comments: Part of a series of 8 papers on QUBIC accepted by JCAP for a special issue: https://iopscience.iop.org/journal/1475-7516/page/QUBIC_status_and_forecast

The long duration cryogenic system of the OLIMPO balloon--borne experiment: design and in--flight performance

Authors: A. Coppolecchia, L. Lamagna, S. Masi, P. A. R. Ade, G. Amico, E. S. Battistelli, P. de Bernardis, F. Columbro, L. Conversi, G. D'Alessandro, M. De Petris, M. Gervasi, F. Nati, L. Nati, A. Paiella, F. Piacentini, G. Pisano, G. Presta, A. Schillaci, C. Tucker, M. Zannoni

Abstract: We describe the design and in--flight performance of the cryostat and the self-contained $^{3}$He refrigerator for the OLIMPO balloon--borne experiment, a spectrophotometer to measure the Sunyaev-Zel'dovich effect in clusters of galaxies. The $^{3}$He refrigerator provides the 0.3 K operation temperature for the four arrays of kinetic inductance detectors working in 4 bands centered at 150, 250,… ▽ More We describe the design and in--flight performance of the cryostat and the self-contained $^{3}$He refrigerator for the OLIMPO balloon--borne experiment, a spectrophotometer to measure the Sunyaev-Zel'dovich effect in clusters of galaxies. The $^{3}$He refrigerator provides the 0.3 K operation temperature for the four arrays of kinetic inductance detectors working in 4 bands centered at 150, 250, 350 and 460 GHz. The cryostat provides the 1.65 K base temperature for the $^{3}$He refrigerator, and cools down the reimaging optics and the filters chain at about 2 K. The integrated system was designed for a hold time of about 15 days, to achieve the sensitivity required by the planned OLIMPO observations, and successfully operated during the first long-duration stratospheric flight of OLIMPO in July 2018. The cryostat features two tanks, one for liquid nitrogen and the other one for liquid helium. The long hold time has been achieved by means of custom stiff G10 fiberglass tubes support, which ensures low thermal conductivity and remarkable structural stiffness; multi--layer superinsulation, and a vapour cooled shield, all reducing the heat load on the liquid helium tank. The system was tested in the lab, with more than 15 days of unmanned operations, and then in the long duration balloon flight in the stratosphere. In both cases, the detector temperature was below 300 mK, with thermal stability better than $\pm$ 0.5 mK. The system also operated successfully in the long duration stratospheric balloon flight. △ Less

Submitted 24 July, 2020; originally announced July 2020.

A chemically etched corrugated feedhorn array for D-band CMB observations

Authors: Stefano Mandelli, Elenia Manzan, Aniello Mennella, Francesco Cavaliere, Daniele Viganò, Cristian Franceschet, Paolo de Bernardis, Marco Bersanelli, Maria Gabriella Castellano, Alessandro Coppolecchia, Angelo Cruciani, Massimo Gervasi, Luca Lamagna, Andrea Limonta, Silvia Masi, Alessandro Paiella, Andrea Passerini, Giorgio Pettinari, Francesco Piacentini, Elisabetta Tommasi, Angela Volpe, Mario Zannoni

Abstract: We present the design, manufacturing, and testing of a 37-element array of corrugated feedhorns for Cosmic Microwave Background (CMB) measurements between $140$ and $170$ GHz. The array was designed to be coupled to Kinetic Inductance Detector arrays, either directly (for total power measurements) or through an orthomode transducer (for polarization measurements). We manufactured the array in plat… ▽ More We present the design, manufacturing, and testing of a 37-element array of corrugated feedhorns for Cosmic Microwave Background (CMB) measurements between $140$ and $170$ GHz. The array was designed to be coupled to Kinetic Inductance Detector arrays, either directly (for total power measurements) or through an orthomode transducer (for polarization measurements). We manufactured the array in platelets by chemically etching aluminum plates of $0.3$ mm and $0.4$ mm thickness. The process is fast, low-cost, scalable, and yields high-performance antennas compared to other techniques in the same frequency range. Room temperature electromagnetic measurements show excellent repeatability with an average cross polarization level about $-20$ dB, return loss about $-25$ dB, first sidelobes below $-25$ dB and far sidelobes below $-35$ dB. Our results qualify this process as a valid candidate for state-of-the-art CMB experiments, where large detector arrays with high sensitivity and polarization purity are of paramount importance in the quest for the discovery of CMB polarization $B$-modes. △ Less

Submitted 21 October, 2020; v1 submitted 26 June, 2020; originally announced June 2020.

Journal ref: Experimental Astronomy, 2021

Inference of the Local Interstellar Spectra of Cosmic Ray Nuclei Z<=28 with the GalProp-HelMod Framework

Authors: M. J. Boschini, S. Della Torre, M. Gervasi, D. Grandi, G. Johannesson, G. La Vacca, N. Masi, I. V. Moskalenko, S. Pensotti, T. A. Porter, L. Quadrani, P. G. Rancoita, D. Rozza, M. Tacconi

Abstract: Composition and spectra of Galactic cosmic rays (CRs) are vital for studies of high-energy processes in a variety of environments and on different scales, for interpretation of gamma-ray and microwave observations, disentangling possible signatures of new phenomena, and for understanding of our local Galactic neighborhood. Since its launch, AMS-02 has delivered outstanding quality measurements of… ▽ More Composition and spectra of Galactic cosmic rays (CRs) are vital for studies of high-energy processes in a variety of environments and on different scales, for interpretation of gamma-ray and microwave observations, disentangling possible signatures of new phenomena, and for understanding of our local Galactic neighborhood. Since its launch, AMS-02 has delivered outstanding quality measurements of the spectra of antiprotons, electrons, positrons, and nuclei: H-O, Ne, Mg, Si. These measurements resulted in a number of breakthroughs, however, spectra of heavier nuclei and especially low-abundance nuclei are not expected until later in the mission. Meanwhile, a comparison of published AMS-02 results with earlier data from HEAO-3-C2 indicate that HEAO-3-C2 data may be affected by undocumented systematic errors. Utilizing such data to compensate for the lack of AMS-02 measurements could result in significant errors. In this paper we show that a fraction of HEAO-3-C2 data match available AMS-02 measurements quite well and can be used together with Voyager 1 and ACE-CRIS data to make predictions for the local interstellar spectra (LIS) of nuclei that are not yet released by AMS-02. We are also updating our already published LIS to provide a complete set from H-Ni in the energy range from 1 MeV/nucleon to ~100-500 TeV/nucleon thus covering 8-9 orders of magnitude in energy. Our calculations employ the GalProp-HelMod framework that is proved to be a reliable tool in deriving the LIS of CR antiprotons, electrons, and nuclei H-O. △ Less

Submitted 5 September, 2021; v1 submitted 1 June, 2020; originally announced June 2020.

Comments: 90 pages, 36 figures, 60 tables, ApJS; Fixed typos in Eqs.(C2) and (C32)

Journal ref: The Astrophysical Journal Supplement Series 250 (2020) 27

Progress report on the Large Scale Polarization Explorer

Authors: L. Lamagna, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. Battistelli, A. Baù, M. Bersanelli, M. Biasotti, C. Boragno, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, D. Corsini, F. Cuttaia, G. D'Alessandro, P. de Bernardis, G. De Gasperis , et al. (74 additional authors not shown)

Abstract: The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by co… ▽ More The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by covering a large portion of the northern microwave sky. LSPE/STRIP is a coherent array of receivers planned to be operated from the Teide Observatory in Tenerife, for the control and characterization of the low-frequency polarized signals of galactic origin; LSPE/SWIPE is a balloon-borne bolometric polarimeter based on 330 large throughput multi-moded detectors, designed to measure the CMB polarization at 150 GHz and to monitor the polarized emission by galactic dust above 200 GHz. The combined performance and the expected level of systematics mitigation will allow LSPE to constrain primordial B-modes down to a tensor/scalar ratio of $10^{-2}$. We here report the status of the STRIP pre-commissioning phase and the progress in the characterization of the key subsystems of the SWIPE payload (namely the cryogenic polarization modulation unit and the multi-moded TES pixels) prior to receiver integration. △ Less

Submitted 5 May, 2020; v1 submitted 3 May, 2020; originally announced May 2020.

Comments: 8 pages, 5 figures, Accepted for publication in Journal of Low Temperature Physics

QUBIC: the Q & U Bolometric Interferometer for Cosmology

Authors: E. S. Battistelli, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi, D. Auguste, J. Aumont, S. Azzoni, S. Banfi, P. Battaglia, A. Baù, B. Bèlier, D. Bennett, L. Bergè, J. -Ph. Bernard, M. Bersanelli, M. -A. Bigot-Sazy, N. Bleurvacq, J. Bonaparte, J. Bonis, A. Bottani, E. Bunn, D. Burke, D. Buzi , et al. (114 additional authors not shown)

Abstract: The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addr… ▽ More The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: Accepted for publication in the Journal of Low Temperature Physics

QUBIC: using NbSi TESs with a bolometric interferometer to characterize the polarisation of the CMB

Authors: M. Piat, B. Bélier, L. Bergé, N. Bleurvacq, C. Chapron, S. Dheilly, L. Dumoulin, M. González, L. Grandsire, J. -Ch. Hamilton, S. Henrot-Versillé, D. T. Hoang, S. Marnieros, W. Marty, L. Montier, E. Olivieri, C. Oriol, C. Perbost, D. Prêle, D. Rambaud, M. Salatino, G. Stankowiak, J. -P. Thermeau, S. Torchinsky, F. Voisin , et al. (113 additional authors not shown)

Abstract: QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detec… ▽ More QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system. △ Less

Submitted 9 December, 2019; v1 submitted 27 November, 2019; originally announced November 2019.

Comments: Conference proceedings submitted to the Journal of Low Temperature Physics for LTD18

NIEL Dose Analysis on triple and single junction InGaP/GaAs/Ge solar cells irradiated with electrons, protons and neutrons

Authors: Roberta Campesato, Carsten Baur, Mario Carta, Mariacristina Casale, Davide Chiesa, Massimo Gervasi, Enos Gombia, Erminio Greco, Aldo Kingma, Massimiliano Nastasi, Ezio Previtali, Pier Giorgio Rancoita, Davide Rozza, Emilio Santoro, Mauro Tacconi

Abstract: Triple junction (InGaP/GaAs/Ge) and single junction (SJ) solar cells were irradiated with electrons, protons and neutrons. The degradation of remaining factors was analyzed as function of the induced Displacement Damage Dose (DDD) calculated by means of the SR-NIEL (Screened Relativistic Non Ionizing\ Energy Loss) approach. In particular, the aim of this work is to analyze the variation of the sol… ▽ More Triple junction (InGaP/GaAs/Ge) and single junction (SJ) solar cells were irradiated with electrons, protons and neutrons. The degradation of remaining factors was analyzed as function of the induced Displacement Damage Dose (DDD) calculated by means of the SR-NIEL (Screened Relativistic Non Ionizing\ Energy Loss) approach. In particular, the aim of this work is to analyze the variation of the solar cells remaining factors due to neutron irradiation with respect to those previously obtained with electrons and protons. The current analysis confirms that the degradation of the $P_{max}$ electrical parameter is related by means of the usual semi-empirical expression to the displacement dose, independently of type of the incoming particle. $I_{sc}$ and $V_{oc}$ parameters were also measured as a function of the displacement damage dose. Furthermore, a DLTS analysis was carried out on diodes - with the same epitaxial structure as the middle sub-cell - irradiated with neutrons. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Deciphering the local Interstellar spectra of secondary nuclei with GALPROP/HelMod framework and a hint for primary lithium in cosmic rays

Authors: M. J. Boschini, S. Della Torre, M. Gervasi, D. Grandi, G. Johannesson, G. La Vacca, N. Masi, I. V. Moskalenko, S. Pensotti, T. A. Porter, L. Quadrani, P. G. Rancoita, D. Rozza, M. Tacconi

Abstract: Local interstellar spectra (LIS) of secondary cosmic ray (CR) nuclei, lithium, beryllium, boron, and partially secondary nitrogen, are derived in the rigidity range from 10 MV to ~200 TV using the most recent experimental results combined with the state-of-the-art models for CR propagation in the Galaxy and in the heliosphere. The lithium spectrum appears somewhat flatter at high energies compared… ▽ More Local interstellar spectra (LIS) of secondary cosmic ray (CR) nuclei, lithium, beryllium, boron, and partially secondary nitrogen, are derived in the rigidity range from 10 MV to ~200 TV using the most recent experimental results combined with the state-of-the-art models for CR propagation in the Galaxy and in the heliosphere. The lithium spectrum appears somewhat flatter at high energies compared to other secondary species that may imply a primary lithium component. Two propagation packages, GALPROP and HelMod, are combined to provide a single framework that is run to reproduce direct measurements of CR species at different modulation levels, and at both polarities of the solar magnetic field. An iterative maximum-likelihood method is developed that uses GALPROP-predicted LIS as input to HelMod, which provides the modulated spectra for specific time periods of the selected experiments for the model-data comparison. The proposed LIS accommodate the low-energy interstellar spectra measured by Voyager 1, HEAO-3, and ACE/CRIS as well as the high-energy observations by PAMELA, AMS-02, and earlier experiments that are made deep in the heliosphere. The interstellar and heliospheric propagation parameters derived in this study are consistent with our earlier results for propagation of CR protons, helium, carbon, oxygen, antiprotons, and electrons. △ Less

Submitted 12 December, 2019; v1 submitted 8 November, 2019; originally announced November 2019.

Comments: 17 pages, 10 figures, 6 tables, ApJ accepted

Journal ref: The Astrophysical Journal 889 (2020) 167

Anisotropy of Cosmic Ray Fluxes Measured with the Alpha Magnetic Spectrometer on the ISS

Authors: M. Molero, J. Casaus, C. Mana, M. A. Velasco, I. Gebauer, M. Graziani, M. Gervasi, G. La Vacca, P. G. Rancoita

Abstract: A measurement of the dipole anisotropy in galactic coordinates for different charged cosmic rays has been performed with the Alpha Magnetic Spectrometer (AMS) onboard the International Space Station (ISS). Results are presented for the first 7.5 years of data taking for protons, Helium, Carbon and Oxygen, and 6.5 years for positrons and electrons. All the species are found to be consistent with is… ▽ More A measurement of the dipole anisotropy in galactic coordinates for different charged cosmic rays has been performed with the Alpha Magnetic Spectrometer (AMS) onboard the International Space Station (ISS). Results are presented for the first 7.5 years of data taking for protons, Helium, Carbon and Oxygen, and 6.5 years for positrons and electrons. All the species are found to be consistent with isotropy and upper limits to the dipole amplitude have been computed. In particular, for energies above 16 GeV a limit of delta < 1.9% and delta < 0.5% at the 95% C.I. is found for positrons and electrons respectively. For rigidities above 200 GV a limit of delta < 0.38%, delta < 0.36%, delta < 1.9% and delta < 1.7% is obtained for protons, Helium, Carbon and Oxygen. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Comments: "Talk presented at the 2019 Meeting of the Division of Particles and Fields of the American Physical Society (DPF2019), July 29 - August 2, 2019, Northeastern University, Boston, C1907293."

The HelMod Model in the Works for Inner and Outer Heliosphere: from AMS to Voyager Probes Observations

Authors: Matteo Jerome Boschini, Stefano Della Torre, Massimo Gervasi, Giuseppe La Vacca, Pier Giorgio Rancoita

Abstract: HelMod is a Monte Carlo code developed to describe the transport of Galactic Cosmic Rays (GCRs) through the heliosphere from the interstellar space to the Earth. In the current HelMod version 4 the modulation process, based on Parker's equation, is applied to the propagation of GCRs in the inner and outer heliosphere, i.e., including the heliosheath. HelMod was proved to reproduce protons, nuclei… ▽ More HelMod is a Monte Carlo code developed to describe the transport of Galactic Cosmic Rays (GCRs) through the heliosphere from the interstellar space to the Earth. In the current HelMod version 4 the modulation process, based on Parker's equation, is applied to the propagation of GCRs in the inner and outer heliosphere, i.e., including the heliosheath. HelMod was proved to reproduce protons, nuclei and electrons cosmic rays spectra observed during solar cycles 23-24 by several detectors, for instance, PAMELA, BESS and AMS-02. In particular, the unprecedented accuracy of AMS-02 observations allowed one a better tuning of the description regarding the solar modulation mechanisms implemented in HelMod. In addition, HelMod demonstrated to be capable of reproducing the uxes observed by the Voyager probes in the inner and outer regions of heliosphere up to its border. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Spectral Distortions of the CMB as a Probe of Inflation, Recombination, Structure Formation and Particle Physics

Authors: J. Chluba, A. Kogut, S. P. Patil, M. H. Abitbol, N. Aghanim, Y. Ali-Haimoud, M. A. Amin, J. Aumont, N. Bartolo, K. Basu, E. S. Battistelli, R. Battye, D. Baumann, I. Ben-Dayan, B. Bolliet, J. R. Bond, F. R. Bouchet, C. P. Burgess, C. Burigana, C. T. Byrnes, G. Cabass, D. T. Chuss, S. Clesse, P. S. Cole, L. Dai , et al. (76 additional authors not shown)

Abstract: Following the pioneering observations with COBE in the early 1990s, studies of the cosmic microwave background (CMB) have focused on temperature and polarization anisotropies. CMB spectral distortions - tiny departures of the CMB energy spectrum from that of a perfect blackbody - provide a second, independent probe of fundamental physics, with a reach deep into the primordial Universe. The theoret… ▽ More Following the pioneering observations with COBE in the early 1990s, studies of the cosmic microwave background (CMB) have focused on temperature and polarization anisotropies. CMB spectral distortions - tiny departures of the CMB energy spectrum from that of a perfect blackbody - provide a second, independent probe of fundamental physics, with a reach deep into the primordial Universe. The theoretical foundation of spectral distortions has seen major advances in recent years, which highlight the immense potential of this emerging field. Spectral distortions probe a fundamental property of the Universe - its thermal history - thereby providing additional insight into processes within the cosmological standard model (CSM) as well as new physics beyond. Spectral distortions are an important tool for understanding inflation and the nature of dark matter. They shed new light on the physics of recombination and reionization, both prominent stages in the evolution of our Universe, and furnish critical information on baryonic feedback processes, in addition to probing primordial correlation functions at scales inaccessible to other tracers. In principle the range of signals is vast: many orders of magnitude of discovery space could be explored by detailed observations of the CMB energy spectrum. Several CSM signals are predicted and provide clear experimental targets, some of which are already observable with present-day technology. Confirmation of these signals would extend the reach of the CSM by orders of magnitude in physical scale as the Universe evolves from the initial stages to its present form. The absence of these signals would pose a huge theoretical challenge, immediately pointing to new physics. △ Less

Submitted 25 April, 2019; v1 submitted 11 March, 2019; originally announced March 2019.

Comments: Astro2020 Science White Paper, 5 pages text, 13 pages in total, 3 Figures, minor update to references

The STRIP instrument of the Large Scale Polarization Explorer: microwave eyes to map the Galactic polarized foregrounds

Authors: C. Franceschet, S. Realini, A. Mennella, G. Addamo, A. Baù, P. M. Battaglia, M. Bersanelli, B. Caccianiga, S. Caprioli, F. Cavaliere, K. A. Cleary, F. Cuttaia, F. Del Torto, V. Fafone, Z. Farooqui, R. T. Génova Santos, T. C. Gaier, M. Gervasi, T. Ghigna, F. Incardona, S. Iovenitti, M. Jones, P. Kangaslahti, R. Mainini, D. Maino , et al. (26 additional authors not shown)

Abstract: In this paper we discuss the latest developments of the STRIP instrument of the "Large Scale Polarization Explorer" (LSPE) experiment. LSPE is a novel project that combines ground-based (STRIP) and balloon-borne (SWIPE) polarization measurements of the microwave sky on large angular scales to attempt a detection of the "B-modes" of the Cosmic Microwave Background polarization. STRIP will observe a… ▽ More In this paper we discuss the latest developments of the STRIP instrument of the "Large Scale Polarization Explorer" (LSPE) experiment. LSPE is a novel project that combines ground-based (STRIP) and balloon-borne (SWIPE) polarization measurements of the microwave sky on large angular scales to attempt a detection of the "B-modes" of the Cosmic Microwave Background polarization. STRIP will observe approximately 25% of the Northern sky from the "Observatorio del Teide" in Tenerife, using an array of forty-nine coherent polarimeters at 43 GHz, coupled to a 1.5 m fully rotating crossed-Dragone telescope. A second frequency channel with six-elements at 95 GHz will be exploited as an atmospheric monitor. At present, most of the hardware of the STRIP instrument has been developed and tested at sub-system level. System-level characterization, starting in July 2018, will lead STRIP to be shipped and installed at the observation site within the end of the year. The on-site verification and calibration of the whole instrument will prepare STRIP for a 2-years campaign for the observation of the CMB polarization. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: 17 pages, 15 figures, proceedings of the SPIE Astronomical Telescopes + Instrumentation conference "Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX", on June 15th, 2018, Austin (TX)

QUBIC: Exploring the primordial Universe with the Q\&U Bolometric Interferometer

Authors: Aniello Mennella, Peter Ade, Giorgio Amico, Didier Auguste, Jonathan Aumont, Stefano Banfi, Gustavo Barbaràn, Paola Battaglia, Elia Battistelli, Alessandro Baù, Benoit Bélier, David G. Bennett, Laurent Bergé, Jean Philippe Bernard, Marco Bersanelli, Marie Anne Bigot Sazy, Nathat Bleurvacq, Juan Bonaparte, Julien Bonis, Emory F. Bunn, David Burke, Daniele Buzi, Alessandro Buzzelli, Francesco Cavaliere, Pierre Chanial , et al. (105 additional authors not shown)

Abstract: In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its… ▽ More In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020. △ Less

Submitted 23 January, 2019; v1 submitted 30 November, 2018; originally announced December 2018.

Comments: Proceedings of the 2018 ICNFP conference, Crete. Published by Universe arXiv admin note: text overlap with arXiv:1801.03730

Journal ref: Universe 2019, 5, 42

NIEL DOSE and DLTS Analyses on Triple and Single Junction solar cells irradiated with electrons and protons

Authors: Roberta Campesato, Carsten Baur, Mariacristina Casale, Massimo Gervasi, Enos Gombia, Erminio Greco, Aldo Kingma, Pier Giorgio Rancoita, Davide Rozza, Mauro Tacconi

Abstract: Space solar cell radiation hardness is of fundamental importance in view of the future missions towards harsh radiation environment (like the Jupiter missions) and for the new spacecraft using Electrical Propulsion. In this paper we report the radiation data for triple junction (TJ) solar cells and related component cells. Triple junction solar cells, InGaP top cells and GaAs middle cells degrade… ▽ More Space solar cell radiation hardness is of fundamental importance in view of the future missions towards harsh radiation environment (like the Jupiter missions) and for the new spacecraft using Electrical Propulsion. In this paper we report the radiation data for triple junction (TJ) solar cells and related component cells. Triple junction solar cells, InGaP top cells and GaAs middle cells degrade after electron radiation as expected. With proton irradiation, a high spread in the remaining factors was observed, especially for the TJ and Ge bottom cells. Radiation results have been analyzed by means of the Displacement Damage Dose method and DLTS spectroscopy. In particular with DLTS spectroscopy it was possible to analyze the nature of a few defects introduced by irradiation inside the GaAs sub cell observing a strong correlation with the Displacement Damage Dose. △ Less

Submitted 27 November, 2018; originally announced November 2018.

Comments: to appear in the Proceedings of the World Conference on Photovoltaic Energy Conversion (WCPEC-7), Waikoloa, HAWAII, June 10-15, 2018. arXiv admin note: substantial text overlap with arXiv:1704.06495, arXiv:1809.07157

Thermal architecture for the QUBIC cryogenic receiver

Authors: A. J. May, C. Chapron, G. Coppi, G. D'Alessandro, P. de Bernardis, S. Masi, S. Melhuish, M. Piat, L. Piccirillo, A. Schillaci, J. -P. Thermeau, P. Ade, G. Amico, D. Auguste, J. Aumont, S. Banfi, G. Barbara, P. Battaglia, E. Battistelli, A. Bau, B. Belier, D. Bennett, L. Berge, J. -Ph. Bernard, M. Bersanelli , et al. (105 additional authors not shown)

Abstract: QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex opt… ▽ More QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Journal ref: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy IX. Vol. 10708. International Society for Optics and Photonics, 2018

Effects of irradiation on Triple and Single Junction InGaP/GaAs/Ge solar cells

Authors: Roberta Campesato, Carsten Baur, Mariacristina Casale, Massimo Gervasi, Enos Gombia, Erminio Greco, Aldo Kingma, Pier Giorgio Rancoita, Davide Rozza, Mauro Tacconi

Abstract: The investigation of the degradation effects on triple-junction (TJ) solar cells, operating in space environment, is of primary importance in view of future space missions towards harsh radiation orbits (e.g. MEO with high particle irradiation intensity) and for the new spacecraft based on electrical propulsion. In the present work, we report the experimental results obtained from the irradiation… ▽ More The investigation of the degradation effects on triple-junction (TJ) solar cells, operating in space environment, is of primary importance in view of future space missions towards harsh radiation orbits (e.g. MEO with high particle irradiation intensity) and for the new spacecraft based on electrical propulsion. In the present work, we report the experimental results obtained from the irradiation test campaign carried out both on (InGaP/GaAs/Ge) TJ solar cells and on single junction (SJ) isotype sub-cells (i.e. InGaP top cells, GaAs middle cells and Ge bottom cells). In particular, the electrical performances degradation of the irradiated samples was analyzed by means of the Displacement Damage Dose (DDD) method based on the NIEL (Non Ionizing Energy Loss) scaling hypothesis, with DDD doses computed by the SR-NIEL approach. By plotting the remaining factors as a function of the DDD, a single degradation curve for each sample type and for each electrical parameter has been found. The collapse of the remaining factors on a single curve has been achieved by selecting suitable displacement threshold energies, $E_d$, for NIEL calculation. Moreover, DLTS (Deep level Transient Spectroscopy) technique was used to better understand the nature of the defects produced by irradiation. DLTS measurements reveal a good correlation between defects introduced by irradiation inside the GaAs sub-cell and the calculated Displacement Damage Doses. △ Less

Submitted 19 September, 2018; originally announced September 2018.

Comments: To appear in the Proceedings of the 35th European PV Solar Energy Conference, Brussels, 24-28 September 2018