-
Effective Constitutive Relations for Simulating CO2 Capillary Trap** in Heterogeneous Reservoirs with Fluvial Sedimentary Architecture
Authors:
Naum I. Gershenzon,
Robert W. Ritzi Jr.,
David F. Dominic,
Edward Mehnert
Abstract:
Carbon dioxide (CO2) storage reservoirs commonly exhibit sedimentary architecture that reflects fluvial deposition. The heterogeneity in petrophysical properties arising from this architecture influences the dynamics of injected CO2. We previously used a geocellular modeling approach to represent this heterogeneity, including heterogeneity in constitutive saturation relationships. The dynamics of…
▽ More
Carbon dioxide (CO2) storage reservoirs commonly exhibit sedimentary architecture that reflects fluvial deposition. The heterogeneity in petrophysical properties arising from this architecture influences the dynamics of injected CO2. We previously used a geocellular modeling approach to represent this heterogeneity, including heterogeneity in constitutive saturation relationships. The dynamics of CO2 plumes in fluvial reservoirs was investigated during and after injection. It was shown that small-scale (centimeter to meter) features play a critical role in capillary trap** processes and have a primary effect on physical- and dissolution-trap** of CO2, and on the ultimate distribution of CO2 in the reservoir. Heterogeneity in saturation functions at that small scale enhances capillary trap** (snap off), creates capillary pinning, and increases the surface area of the plume. The understanding of these small-scale trap** processes from previous work is here used to develop effective saturation relationships that represent, at a larger scale, the integral effect of these processes. While it is generally not computationally feasible to represent the small-scale heterogeneity directly in a typical reservoir simulation, the effective saturation relationships for capillary pressure and relative permeability presented here, along with an effective intrinsic permeability, allow better representation of the total physical trap** at the scale of larger model grid cells, as typically used in reservoir simulations, and thus the approach diminishes limits on cell size and decreases simulation time in reservoir simulations.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Towards a simple, comprehensive model of regular earthquakes and slow slip events, part II: two-dimensional model
Authors:
Naum I. Gershenzon,
Thomas Skinner
Abstract:
Although our existing one-dimensional (1D) model provides a successful quantitative description of rupture events, a 1D description is somewhat limited. We therefore derive a two-dimensional (2D) model which allows us to investigate characteristics of earthquakes (EQs) and slow slip events (SSEs) that are only apparent in a second dimension. We find that the leading edge of an EQ rupture in the di…
▽ More
Although our existing one-dimensional (1D) model provides a successful quantitative description of rupture events, a 1D description is somewhat limited. We therefore derive a two-dimensional (2D) model which allows us to investigate characteristics of earthquakes (EQs) and slow slip events (SSEs) that are only apparent in a second dimension. We find that the leading edge of an EQ rupture in the direction of the global shear stress (x-direction) is wider in the plane of the crustal fault (y-direction) than the trailing edge. The direction of the slip velocity is primarily in the x-direction. EQ ruptures expand in both the x- and y-directions. In SSEs, the rupture also expands in both directions for a short period of time, then, after pulses are formed, there is no further expandsion, i.e., the pulse shape remains practically unchanged. The 2D simulations show the seismic moment (M) versus time (T) scaling law may be expressed by the relation , where . For EQs, is approximately equal to 3, while for SSEs, tends to 1 as the pulses develop and become fully established. The 2D model quantitatively describes the parameters of a seismic pulse in episodic tremor and slip (ETS) phenomena and also explains important features of non-volcanic tremor associated with this pulse, such as reverse tremor migration. The 2D model confirms the basic findings obtained previously by the 1D model: (i) The type of a seismic event, EQ or SSE, and the type of a rupture, crack-like or pulse-like, are determined solely by the fault strength, the ratio of the shear to normal stress, and the gradient in this ratio; (ii) The shape of a rupture and position of the maximum slip is determined by the spatial distribution of the initial stress.
△ Less
Submitted 17 December, 2021;
originally announced December 2021.
-
Towards a simple, comprehensive model of regular earthquakes and slow slip events, part I: one-dimensional model
Authors:
Naum I. Gershenzon,
Cong Zhou,
Thomas Skinner
Abstract:
We have developed a model that describes the major characteristics of a rupture, ranging from regular earthquakes (EQs) to slow slip events (SSEs), including episodic tremor and slip (ETS). Previous model predictions, while accurate, are based on a highly idealized initial stress distribution and a simple velocity-dependent expression for friction. The full scope of the model has, therefore, not b…
▽ More
We have developed a model that describes the major characteristics of a rupture, ranging from regular earthquakes (EQs) to slow slip events (SSEs), including episodic tremor and slip (ETS). Previous model predictions, while accurate, are based on a highly idealized initial stress distribution and a simple velocity-dependent expression for friction. The full scope of the model has, therefore, not been fully demonstrated. Further developments, presented here, include more physically realistic treatments of both the initial conditions and friction. Model predictions are: (1) The type of a seismic event, i.e. regular EQ or SSE, is determined by the fault strength, the shear to normal stress ratio, and the gradient in the ratio. Quantitative values for these crucial parameters are also obtained here; (2) Rupture velocities for regular EQs range from a fraction of the shear wave velocity up to the supershear velocity. The maximum slip velocity for regular EQs is typically on the order of 1 m/s. For SSEs, the slip velocity ranges widely from a few cm/year up to 0.1 m/s. The magnitude of the stress drop may vary in the range from 1% to 10% of the initial shear stress for regular EQs and from 0.1% to 10% for the SSEs; (3) The rupture can expend as a crack-like mode or as a self-healing pulse mode. The type of rupture mode is determined by the stress ratio and its gradient. If stress heterogeneity has a step-like shape, the rupture is always crack-like. If the heterogeneity is localized, the rupture is crack-like for sufficiently large values of the stress and its gradient and is pulse-like for smaller values; (4) After an instability develops, rupture dynamics do not depend on the relative values of the rate-state a and b parameters, i.e., it does not matter if frictional sliding is velocity-weakening or velocity-strengthening. Models based on the rate-state are not consistent with this result.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Comparison of CO2 trap** in highly heterogeneous reservoirs with Brooks-Corey and van Genuchten type capillary pressure curves
Authors:
Naum I. Gershenzon,
Robert W. Ritzi Jr.,
David F. Dominic,
Edward Mehnert,
Roland T. Okwen
Abstract:
Geological heterogeneities essentially affect the dynamics of a CO2 plume in subsurface environments. Previously we showed how the dynamics of a CO2 plume is influenced by the multi-scale stratal architecture in deep saline reservoirs. The results strongly suggest that representing small-scale features is critical to understanding capillary trap** processes. Here we present the result of simulat…
▽ More
Geological heterogeneities essentially affect the dynamics of a CO2 plume in subsurface environments. Previously we showed how the dynamics of a CO2 plume is influenced by the multi-scale stratal architecture in deep saline reservoirs. The results strongly suggest that representing small-scale features is critical to understanding capillary trap** processes. Here we present the result of simulation of CO2 trap** using two different conventional approaches, i.e. Brooks-Corey and van Genuchten, for the capillary pressure curves. We showed that capillary trap** and dissolution rates are very different for the Brooks-Corey and van Genuchten approaches when heterogeneity and hysteresis are both represented.
△ Less
Submitted 28 July, 2015;
originally announced July 2015.
-
How does the connectivity of open-framework conglomerates within multi-scale hierarchical fluvial architecture affect oil sweep efficiency in waterflooding?
Authors:
Naum I. Gershenzon,
Mohamad Reza Soltanian,
Robert W. Ritzi Jr.,
David F. Dominic,
Don Keefer,
Eric Shaffer,
Brynne Storsved
Abstract:
We studied the effects on oil sweep efficiency of the proportion, hierarchical organization, and connectivity of high-permeability open-framework conglomerate (OFC) cross-sets within the multi-scale stratal architecture found in fluvial deposits. Utilizing numerical simulations and the RVA/Paraview open-source visualization package, we analyzed oil production rate, water breakthrough time, and spa…
▽ More
We studied the effects on oil sweep efficiency of the proportion, hierarchical organization, and connectivity of high-permeability open-framework conglomerate (OFC) cross-sets within the multi-scale stratal architecture found in fluvial deposits. Utilizing numerical simulations and the RVA/Paraview open-source visualization package, we analyzed oil production rate, water breakthrough time, and spatial and temporal distribution of residual oil saturation. The effective permeability of the reservoir exhibits large-scale anisotropy created by the organization of OFC cross-sets within unit bars, and the organization of unit bars within compound bars. As a result oil sweep efficiency critically depends on the direction of the pressure gradient. When pressure gradient is oriented normal to paleoflow direction, the total oil production and the water breakthrough time are larger, and remaining oil saturation is smaller. This result is found regardless of the proportion or connectivity of the OFC cross-sets, within the ranges examined. Contrary to expectations, the total amount of trapped oil due to the effect of capillary trap** does not depend on the pressure gradient within the examined range. Hence the pressure difference between production and injection wells does not affect sweep efficiency, although the spatial distribution of oil remaining in the reservoir depends on this value. Whether or not clusters of connected OFC span the domain does not affect sweep efficiency, only the absolute rate of oil production. The RVA/Paraview application allowed us to visualize and examine these non-intuitive results.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
How does dissipation affect the transition from static to dynamic macroscopic friction?
Authors:
Naum I. Gershenzon,
Gust Bambakidis,
Thomas Skinner
Abstract:
Description of the transitional process from a static to a dynamic frictional regime is a fundamental problem of modern physics. Previously we developed a model based on the well-known Frenkel-Kontorova model to describe dry macroscopic friction. Here this model has been modified to include the effect of dissipation in derived relations between the kinematic and dynamic parameters of a transition…
▽ More
Description of the transitional process from a static to a dynamic frictional regime is a fundamental problem of modern physics. Previously we developed a model based on the well-known Frenkel-Kontorova model to describe dry macroscopic friction. Here this model has been modified to include the effect of dissipation in derived relations between the kinematic and dynamic parameters of a transition process. The main (somewhat counterintuitive) result is a demonstration that the rupture (i.e. detachment front) velocity of the slip pulse which arises during the transition does not depend on friction. The only parameter (besides the elastic and plastic properties of the medium) controlling the rupture velocity is the shear to normal stress ratio. In contrast to the rupture velocity, the slip velocity does depend on friction. The model we have developed describes these processes over a wide range of rupture and slip velocities (up to 7 orders of magnitude) allowing, in particular, the consideration of seismic events ranging from regular earthquakes, with rupture velocities on the order of a few km/s, to slow slip events, with rupture velocities of a few km/day.
△ Less
Submitted 25 November, 2014; v1 submitted 4 November, 2014;
originally announced November 2014.
-
Model of deep non-volcanic tremor part II: episodic tremor and slip
Authors:
Naum I. Gershenzon,
Gust Bambakidis
Abstract:
Bursts of tremor accompany a moving slip pulse in Episodic Tremor and Slip (ETS) events. The sources of this non-volcanic tremor (NVT) are largely unknown. We have developed a model describing the mechanism of NTV generation. According to this model, NTV is a reflection of resonant-type oscillations excited in a fault at certain depth ranges. From a mathematical viewpoint, tremor (phonons) and sli…
▽ More
Bursts of tremor accompany a moving slip pulse in Episodic Tremor and Slip (ETS) events. The sources of this non-volcanic tremor (NVT) are largely unknown. We have developed a model describing the mechanism of NTV generation. According to this model, NTV is a reflection of resonant-type oscillations excited in a fault at certain depth ranges. From a mathematical viewpoint, tremor (phonons) and slip pulses (solitons) are two different solutions of the sine-Gordon equation describing frictional processes inside a fault. In an ETS event, a moving slip pulse generates tremor due to interaction with structural heterogeneities in a fault and to failures of small asperities. Observed tremor parameters, such as central frequency and frequency attenuation curve, are associated with fault parameters and conditions, such as elastic modulus, effective normal stress, penetration hardness and friction. Model prediction of NTV frequency content is consistent with observations. In the framework of this model it is possible to explain the complicated pattern of tremor migration, including rapid tremor propagation and reverse tremor migration. Migration along the strike direction is associated with movement of the slip pulse. Rapid tremor propagation in the slip-parallel direction is associated with movement of kinks along a 2D slip pulse. A slip pulse, pinned in some places, can fragment into several pulses, causing tremor associated with some of these pulse fragments to move opposite to the main propagation direction. The model predicts that the frequency content of tremor during an ETS event is slightly different from the frequency content of ambient tremor and tremor triggered by earthquakes.
△ Less
Submitted 4 November, 2014;
originally announced November 2014.
-
Influence of small scale heterogeneity on CO2 trap** processes in deep saline aquifers
Authors:
Naum I. Gershenzon,
Mohamad Reza Soltanian,
Robert W. Ritzi Jr.,
David F. Dominic
Abstract:
The physical mechanism of CO2 trap** in porous media by capillary trap** (pore scale) incorporates a number of related processes, i.e. residual trap**, trap** due to hysteresis of the relative permeability, and trap** due to hysteresis of the capillary pressure. Additionally CO2 may be trapped in heterogeneous media due to difference in capillary pressure entry points for different mater…
▽ More
The physical mechanism of CO2 trap** in porous media by capillary trap** (pore scale) incorporates a number of related processes, i.e. residual trap**, trap** due to hysteresis of the relative permeability, and trap** due to hysteresis of the capillary pressure. Additionally CO2 may be trapped in heterogeneous media due to difference in capillary pressure entry points for different materials (facies scale). The amount of CO2 trapped by these processes depends upon a complex system of non-linear and hysteretic relationships including how relative permeability and capillary pressure vary with brine and CO2 saturation, and upon the spatial variation in these relationships as caused by geologic heterogeneity. Geological heterogeneities affect the dynamics of CO2 plumes in subsurface environments. Recent studies have led to new conceptual and quantitative models for sedimentary architecture in fluvial deposits over a range of scales that are relevant to the performance of some deep saline reservoirs. We investigated how the dynamics of a CO2 plume, during and after injection, is influenced by the hierarchical and multi-scale stratal architecture in such reservoirs. The results strongly suggest that representing small scales features (decimeter to meter), including their organization within a hierarchy of larger-scale features, is critical to understanding trap** processes.
△ Less
Submitted 1 July, 2014;
originally announced July 2014.
-
Understanding the Impact of Open-Framework Conglomerates on Water-Oil Displacements: Victor Interval of the Ivishak Reservoir, Prudhoe Bay Field, Alaska
Authors:
Naum I. Gershenzon,
Mohamadreza Soltanian,
Robert W. Ritzi Jr.,
David F. Dominic
Abstract:
The Victor Unit of the Ivishak Formation in the Prudhoe Bay Oilfield is characterized by high net-to-gross fluvial sandstones and conglomerates. The highest permeability is found within sets of cross-strata of open-framework conglomerate (OFC). They are preserved within unit bar deposits and assemblages of unit bar deposits within compound (braid) bar deposits. They are thief zones limiting enhanc…
▽ More
The Victor Unit of the Ivishak Formation in the Prudhoe Bay Oilfield is characterized by high net-to-gross fluvial sandstones and conglomerates. The highest permeability is found within sets of cross-strata of open-framework conglomerate (OFC). They are preserved within unit bar deposits and assemblages of unit bar deposits within compound (braid) bar deposits. They are thief zones limiting enhanced oil recovery. We incorporate recent research that has quantified important attributes of their sedimentary architecture within preserved deposits. We use high-resolution models to demonstrate the fundamental aspects of their control on oil production rate, water breakthrough time, and spatial and temporal distribution of residual oil saturation. We found that when the pressure gradient is oriented perpendicular to the paleoflow direction, the total oil production and the water breakthrough time are larger, and remaining oil saturation is smaller, than when it is oriented parallel to paleoflow. The pressure difference between production and injection wells does not affect sweep efficiency, although the spatial distribution of oil remaining in the reservoir critically depends on this value. Oil sweep efficiency decreases slightly with increase in the proportion of OFC cross-strata. Whether or not clusters of connected OFC span the domain does not visibly affect sweep efficiency.
△ Less
Submitted 15 May, 2014;
originally announced May 2014.
-
Model of deep non-volcanic tremor part I: ambient and triggered tremor
Authors:
Naum I. Gershenzon,
Gust Bambakidis
Abstract:
There is evidence of triggering of tremor by seismic waves emanating from distant large earthquakes. The frequency contents of triggered and ambient tremor are largely identical, suggesting that tremor does not depend directly on the nature of the source. We show here that the model of plate dynamics developed earlier by us is an appropriate tool for describing the onset of tremor. In the framewor…
▽ More
There is evidence of triggering of tremor by seismic waves emanating from distant large earthquakes. The frequency contents of triggered and ambient tremor are largely identical, suggesting that tremor does not depend directly on the nature of the source. We show here that the model of plate dynamics developed earlier by us is an appropriate tool for describing the onset of tremor. In the framework of this model, tremor is an internal response of a fault to a failure triggered by external disturbances. The model predicts generation of radiation in a frequency range defined by the fault parameters. Other specific features predicted are: the upper limit of the size of the emitting area is a few dozen km; tremor accompanies earthquakes and aseismic slip; the frequency content of tremor depends on the type of failure. The model also explains why a tremor has no clear impulsive phase, in contrast to earthquakes. A comparatively small effective normal stress (hence a high fluid pressure) is required to make the model consistent with observed tremor parameters. Our model indicates that tremor is not necessarily a superposition of low frequency earthquakes, as commonly assumed, although the latter may trigger them. The approach developed complements the conventional viewpoint which assumes that tremor reflects a frictional process with low rupture speed. Essentially our model adds the hypothesis that resonant-type oscillations exist inside a fault. This addition may change our understanding of the nature of tremor in general, and the methods of its identification and location in particular.
△ Less
Submitted 26 August, 2013;
originally announced August 2013.
-
The Fantastic Four: A plug 'n' play set of optimal control pulses for enhancing nmr spectroscopy
Authors:
Manoj Nimbalkar,
Burkhard Luy,
Thomas E. Skinner,
Jorge L. Neves,
Naum I. Gershenzon,
Kyryl Kobzar,
Wolfgang Bermel,
Steffen J. Glaser
Abstract:
We present highly robust, optimal control-based shaped pulses designed to replace all 90° and 180° hard pulses in a given pulse sequence for improved performance. Special attention was devoted to ensuring that the pulses can be simply substituted in a one-to-one fashion for the original hard pulses without any additional modification of the existing sequence. The set of four pulses for each nucleu…
▽ More
We present highly robust, optimal control-based shaped pulses designed to replace all 90° and 180° hard pulses in a given pulse sequence for improved performance. Special attention was devoted to ensuring that the pulses can be simply substituted in a one-to-one fashion for the original hard pulses without any additional modification of the existing sequence. The set of four pulses for each nucleus therefore consists of 90° and 180° point-to-point (PP) and universal rotation (UR) pulses of identical duration. These 1 ms pulses provide uniform performance over resonance offsets of 20 kHz (1H) and 35 kHz (13C) and tolerate reasonably large radio frequency (RF) inhomogeneity/miscalibration of (+/-)15% (1H) and (+/-)10% (13C), making them especially suitable for NMR of small-to-medium-sized molecules (for which relaxation effects during the pulse are negligible) at an accessible and widely utilized spectrometer field strength of 600 MHz. The experimental performance of conventional hard-pulse sequences is shown to be greatly improved by incorporating the new pulses, each set referred to as the Fantastic Four (Fanta4).
△ Less
Submitted 1 September, 2012;
originally announced September 2012.
-
Model for triggering of non-volcanic tremor by earthquakes
Authors:
Naum I. Gershenzon,
Gust Bambakidis
Abstract:
There is evidence of tremor triggering by seismic waves emanating from distant large earthquakes. The frequency content of both triggered and ambient tremor are largely identical, suggesting that this property does not depend directly on the nature of the source. We show here that the model of plate dynamics developed earlier by us is an appropriate tool for describing tremor triggering. In the fr…
▽ More
There is evidence of tremor triggering by seismic waves emanating from distant large earthquakes. The frequency content of both triggered and ambient tremor are largely identical, suggesting that this property does not depend directly on the nature of the source. We show here that the model of plate dynamics developed earlier by us is an appropriate tool for describing tremor triggering. In the framework of this model, tremor is an internal response of a fault to a failure triggered by external disturbances. The model predicts generation of radiation in a frequency range defined by the fault parameters. Thus, although the amplitude and duration of a tremor burst may reflect the "personality" of the source, the frequency content does not. The model also explains why a tremor has no clear impulsive phase, in contrast to earthquakes. The relationship between tremor and low frequency earthquakes is discussed.
△ Less
Submitted 4 February, 2012;
originally announced February 2012.
-
Optimal control design of band-selective excitation pulses that accommodate relaxation and RF inhomogeneity
Authors:
Thomas E. Skinner,
Naum I. Gershenzon,
Manoj Nimbalkar,
Steffen J. Glaser
Abstract:
Existing optimal control protocols for mitigating the effects of relaxation and/or RF inhomogeneity on broadband pulse performance are extended to the more difficult problem of designing robust, refocused, frequency selective excitation pulses. For the demanding case of T1 and T2 equal to the pulse length, anticipated signal losses can be significantly reduced while achieving nearly ideal frequenc…
▽ More
Existing optimal control protocols for mitigating the effects of relaxation and/or RF inhomogeneity on broadband pulse performance are extended to the more difficult problem of designing robust, refocused, frequency selective excitation pulses. For the demanding case of T1 and T2 equal to the pulse length, anticipated signal losses can be significantly reduced while achieving nearly ideal frequency selectivity. Improvements in performance are the result of allowing residual unrefocused magnetization after applying relaxation-compensated selective excitation by optimized pulses (RC-SEBOP). We demonstrate simple pulse sequence elements for eliminating this unwanted residual signal.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
-
Broadband 180 degree universal rotation pulses for NMR spectroscopy designed by optimal control
Authors:
Thomas E. Skinner,
Naum I. Gershenzon,
Manoj Nimbalkar,
Wolfgang Bermel,
Burkhard Luy,
Steffen J. Glaser
Abstract:
Broadband inversion pulses that rotate all magnetization components 180 degrees about a given fixed axis are necessary for refocusing and mixing in high-resolution NMR spectroscopy. The relative merits of various methodologies for generating pulses suitable for broadband refocusing are considered. The de novo design of 180 degree universal rotation pulses using optimal control can provide improved…
▽ More
Broadband inversion pulses that rotate all magnetization components 180 degrees about a given fixed axis are necessary for refocusing and mixing in high-resolution NMR spectroscopy. The relative merits of various methodologies for generating pulses suitable for broadband refocusing are considered. The de novo design of 180 degree universal rotation pulses using optimal control can provide improved performance compared to schemes which construct refocusing pulses as composites of existing pulses. The advantages of broadband universal rotation by optimized pulses (BURBOP) are most evident for pulse design that includes tolerance to RF inhomogeneity or miscalibration. We present new modifications of the optimal control algorithm that incorporate symmetry principles and relax conservative limits on peak RF pulse amplitude for short time periods that pose no threat to the probe. We apply them to generate a set of pulses suitable for widespread use in Carbon-13 spectroscopy on the majority of available probes.
△ Less
Submitted 28 November, 2011;
originally announced November 2011.
-
Transition from static to dynamic macroscopic friction in the framework of the Frenkel-Kontorova model
Authors:
Naum I. Gershenzon,
Gust Bambakidis
Abstract:
A new generation of experiments on dry macroscopic friction has revealed that the transition from static to dynamic friction is essentially a spatially and temporally non-uniform process, initiated by a rupture-like detachment front. We show the suitability of the Frenkel-Kontorova model for describing this transition. The model predicts the existence of two types of detachment fronts, explaining…
▽ More
A new generation of experiments on dry macroscopic friction has revealed that the transition from static to dynamic friction is essentially a spatially and temporally non-uniform process, initiated by a rupture-like detachment front. We show the suitability of the Frenkel-Kontorova model for describing this transition. The model predicts the existence of two types of detachment fronts, explaining both the variability and abrupt change of velocity observed in experiments. The quantitative relation obtained between the velocity of the detachment front and the ratio of shear to normal stress is consistent with experiments. The model provides a functional dependence between slip velocity and shear stress, and predicts that slip velocity is independent of normal stress. Paradoxically, the transition from static to dynamic friction does not depend explicitly on ether the static or the dynamic friction coefficient, although the beginning and end of transition process are controlled by these coefficients.
△ Less
Submitted 21 November, 2011;
originally announced November 2011.
-
Design and application of robust rf pulses for toroid cavity NMR spectroscopy
Authors:
Thomas E. Skinner,
Michael Braun,
Klaus Woelk,
Naum I. Gershenzon,
Steffen J. Glaser
Abstract:
We present robust radio frequency (rf) pulses that tolerate a factor of six inhomogeneity in the B1 field, significantly enhancing the potential of toroid cavity resonators for NMR spectroscopic applications. Both point-to-point (PP) and unitary rotation (UR) pulses were optimized for excitation, inversion, and refocusing using the gradient ascent pulse engineering (GRAPE) algorithm based on optim…
▽ More
We present robust radio frequency (rf) pulses that tolerate a factor of six inhomogeneity in the B1 field, significantly enhancing the potential of toroid cavity resonators for NMR spectroscopic applications. Both point-to-point (PP) and unitary rotation (UR) pulses were optimized for excitation, inversion, and refocusing using the gradient ascent pulse engineering (GRAPE) algorithm based on optimal control theory. In addition, the optimized parameterization (OP) algorithm applied to the adiabatic BIR-4 UR pulse scheme enabled ultra-short (50 microsec) pulses with acceptable performance compared to standard implementations. OP also discovered a new class of non-adiabatic pulse shapes with improved performance within the BIR-4 framework. However, none of the OP-BIR4 pulses are competitive with the more generally optimized UR pulses. The advantages of the new pulses are demonstrated in simulations and experiments. In particular, the DQF COSY result presented here represents the first implementation of 2D NMR spectroscopy using a toroid probe.
△ Less
Submitted 29 November, 2010;
originally announced November 2010.