-
Resistive switching suppression in metal/Nb:SrTiO$_3$ Schottky contacts prepared by room-temperature Pulsed Laser Deposition
Authors:
Renato Buzio,
Andrea Gerbi
Abstract:
Deepening the understanding of interface-type Resistive Switching (RS) in metal/oxide heterojunctions is a key step for the development of high-performance memristors and Schottky rectifiers. In this study, we address the role of metallization technique by fabricating prototypical metal/Nb-doped SrTiO$_3$ (M/NSTO) Schottky contacts via Pulsed Laser Deposition (PLD). Ultrathin Pt and Au electrodes…
▽ More
Deepening the understanding of interface-type Resistive Switching (RS) in metal/oxide heterojunctions is a key step for the development of high-performance memristors and Schottky rectifiers. In this study, we address the role of metallization technique by fabricating prototypical metal/Nb-doped SrTiO$_3$ (M/NSTO) Schottky contacts via Pulsed Laser Deposition (PLD). Ultrathin Pt and Au electrodes are deposited by PLD onto single-crystal (001)-terminated NSTO substrates and interfacial transport is characterized by conventional macroscale methods and nanoscale Ballistic Electron Emission Microscopy. We show that PLD metallization gives Schottky contacts with highly reversible current-voltage characteristics under cyclic polarization. Room-temperature transport is governed by thermionic emission with Schottky barrier height $φ_B$(Pt/NSTO)=0.71-0.75eV, $φ_B$(Au/NSTO)=0.70-0.83eV and ideality factors as small as n(Pt/NSTO)=1.1 and n(Au/NSTO)=1.6. RS remains almost completely suppressed upon imposing broad variations of the Nb do** and of the external stimuli (polarization bias, working temperature, ambient air exposure). At the nanoscale, we find that both systems display high spatial homogeneity of $φ_B$(<50meV), which is only partially affected by the NSTO mixed termination (|$φ_B$ (M/SrO) - $φ_B$ (M/TiO$_2$)|<35meV). Experimental evidences and theoretical arguments indicate that the PLD metallization mitigates interfacial layer effects responsible for RS. This occurs thanks either to a reduction of the interfacial layer thickness and to the creation of an effective barrier against the permeation of ambient gas species affecting charge trap** and redox reactions. This description allows to rationalize interfacial aging effects, observed upon several-months-exposure to ambient air, in terms of interfacial re-oxidation.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Solid lubrication by wet-transferred solution-processed graphene flakes: dissipation mechanisms and superlubricity in mesoscale contacts
Authors:
Renato Buzio,
Andrea Gerbi,
Cristina Bernini,
Luca Repetto,
Andrea Silva,
Andrea Vanossi
Abstract:
Solution-processed few-layers graphene flakes, dispensed to rotating and sliding contacts via liquid dispersions, are gaining increasing attention as friction modifiers to achieve low friction and wear at technologically-relevant interfaces. Vanishing friction states, i.e. superlubricity, have been documented for nearly-ideal nanoscale contacts lubricated by individual graphene flakes; there is ho…
▽ More
Solution-processed few-layers graphene flakes, dispensed to rotating and sliding contacts via liquid dispersions, are gaining increasing attention as friction modifiers to achieve low friction and wear at technologically-relevant interfaces. Vanishing friction states, i.e. superlubricity, have been documented for nearly-ideal nanoscale contacts lubricated by individual graphene flakes; there is however no clear understanding if superlubricity might persist for larger and morphologically-disordered contacts, as those typically obtained by graphene wet transfer from a liquid dispersion. In this study we address the friction performance of solution-processed graphene flakes by means of colloidal probe Atomic Force Microscopy. We use an additive-free aqueous dispersion to coat micrometric silica beads, which are then sled under ambient conditions against prototypical material substrates, namely graphite and the transition metal dichalcogenides (TMDs) MoS2 and WS2. High resolution microscopy proves that the random assembly of the wet-transferred flakes over the silica probes results into an inhomogeneous coating, formed by graphene patches that control contact mechanics through tens-of-nanometers tall protrusions. Atomic-scale friction force spectroscopy reveals that dissipation proceeds via stick-slip instabilities. Load-controlled transitions from dissipative stick-slip to superlubric continuous sliding may occur for the graphene-graphite homojunctions, whereas single- and multiple-slips dissipative dynamics characterizes the graphene-TMD heterojunctions. Systematic numerical simulations demonstrate that the thermally-activated single-asperity Prandtl-Tomlinson model comprehensively describes friction experiments involving different graphene-coated colloidal probes, material substrates and sliding regimes.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Phase-Space Ab-Initio Direct and Reverse Ballistic-Electron Emission Spectroscopy: Schottky Barriers Determination for Au/Ge(100)
Authors:
Andrea Gerbi,
Renato Buzio,
Cesar Gonzalez,
Fernando Flores,
Pedro L. de andres
Abstract:
We develop a phase-space ab-initio formalism to compute Ballistic Electron Emission Spectroscopy current-voltage I(V)'s in a metal-semiconductor interface. We consider injection of electrons into the conduction band for direct bias ($V>0$) and injection of holes into the valence band or injection of secondary Auger electrons into the conduction band for reverse bias ($V<0$). Here, an ab-initio des…
▽ More
We develop a phase-space ab-initio formalism to compute Ballistic Electron Emission Spectroscopy current-voltage I(V)'s in a metal-semiconductor interface. We consider injection of electrons into the conduction band for direct bias ($V>0$) and injection of holes into the valence band or injection of secondary Auger electrons into the conduction band for reverse bias ($V<0$). Here, an ab-initio description of the semiconductor inversion layer (spanning hundreds of Angstroms) is needed. Such formalism is helpful to get parameter-free best-fit values for the Schottky barrier, a key technological characteristic for metal-semiconductor rectifying interfaces. We have applied the theory to characterize the Au/Ge(001) interface; a double barrier is found for electrons injected into the conduction band -- either directly or created by the Auger process -- while only a single barrier has been identified for holes injected into the valence band.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Sliding friction and superlubricity of colloidal AFM probes coated by tribo-induced graphitic transfer layers
Authors:
Renato Buzio,
Andrea Gerbi,
Cristina Bernini,
Luca Repetto,
Andrea Vanossi
Abstract:
Colloidal probe Atomic Force Microscopy (AFM) allows to explore sliding friction phenomena in graphite contacts of nominal lateral size up to hundreds of nanometers. It is known that contact formation involves tribo-induced material transfer of graphite flakes from the graphitic substrate to the colloidal probe. In this context, sliding states with nearly-vanishing friction, i.e. superlubricity, m…
▽ More
Colloidal probe Atomic Force Microscopy (AFM) allows to explore sliding friction phenomena in graphite contacts of nominal lateral size up to hundreds of nanometers. It is known that contact formation involves tribo-induced material transfer of graphite flakes from the graphitic substrate to the colloidal probe. In this context, sliding states with nearly-vanishing friction, i.e. superlubricity, may set in. A comprehensive investigation of the transfer layer properties is mandatory to ascertain the origin of superlubricity. Here we explore the friction response of micrometric beads, of different size and pristine surface roughness, sliding on graphite under ambient conditions. We show that such tribosystems undergo a robust transition towards a low-adhesion, low-friction state dominated by mechanical interactions at one dominant tribo-induced nanocontact. Friction force spectroscopy reveals that the nanocontact can be superlubric or dissipative, in fact undergoing a load-driven transition from dissipative stick-slip to continuous superlubric sliding. This behavior is excellently described by the thermally-activated, single-asperity Prandtl-Tomlinson model. Our results indicate that upon formation of the transfer layer, friction depends on the energy landscape experienced by the topographically-highest tribo-induced nanoasperity. Consistently we find larger dissipation when the tribo-induced nanoasperity is sled against surfaces with higher atomic corrugation than graphite, like MoS2 and WS2, in prototypical Van der Waals layered hetero-junctions.
△ Less
Submitted 11 January, 2024; v1 submitted 3 October, 2022;
originally announced October 2022.
-
Graphite superlubricity enabled by triboinduced nanocontacts
Authors:
Renato Buzio,
Andrea Gerbi,
Cristina Bernini,
Luca Repetto,
Andrea Vanossi
Abstract:
Colloidal probe Atomic Force Microscopy allows to explore sliding states of vanishing friction, i.e. superlubricity, in mesoscopic graphite contacts. Superlubricity is known to appear upon formation of a triboinduced transfer layer, originated by material transfer of graphene flakes from the graphitic substrate to the colloidal probe. Previous studies suggest that friction vanishes due to crystall…
▽ More
Colloidal probe Atomic Force Microscopy allows to explore sliding states of vanishing friction, i.e. superlubricity, in mesoscopic graphite contacts. Superlubricity is known to appear upon formation of a triboinduced transfer layer, originated by material transfer of graphene flakes from the graphitic substrate to the colloidal probe. Previous studies suggest that friction vanishes due to crystalline incommensurability at the newly formed interface. However this picture still lacks several details, such as the roles of the tribolayer roughness and of loading conditions. Hereafter we gain deeper insight into the tribological response of micrometric silica beads sliding on graphite under ambient conditions. We show that the tribotransferred flakes behave as lubricious nanoasperities with a twofold role. First, they decrease the silica-graphite true contact area, in fact causing a breakdown of adhesion and friction by one order of magnitude. Second, they govern mechanical dissipation through the specific energy landscape experienced by the topographically-highest triboinduced nanoasperity. Remarkably, such contact junctions can undergo a load-driven atomic-scale transition from continuous superlubric sliding to dissipative stick-slip, that agrees with the single-asperity Prandtl-Tomlinson model. Superlubricity in mesoscopic silica-graphite junctions may therefore arise from the load-controlled competition between interfacial crystalline incommensurability and contact pinning effects at one dominant nanoasperity.
△ Less
Submitted 6 September, 2023; v1 submitted 7 September, 2021;
originally announced September 2021.
-
Magnetic-Field Tunable Intertwined Checkerboard Charge Order and Nematicity in the Surface Layer of Sr$_2$RuO$_4$
Authors:
Carolina A. Marques,
Luke C. Rhodes,
Rosalba Fittipaldi,
Veronica Granata,
Chi Ming Yim,
Renato Buzio,
Andrea Gerbi,
Antonio Vecchione,
Andreas W. Rost,
Peter Wahl
Abstract:
In strongly correlated electron materials, the electronic, spin, and charge degrees of freedom are closely intertwined. This often leads to the stabilization of emergent orders that are highly sensitive to external physical stimuli promising opportunities for technological applications. In perovskite ruthenates, this sensitivity manifests in dramatic changes of the physical properties with subtle…
▽ More
In strongly correlated electron materials, the electronic, spin, and charge degrees of freedom are closely intertwined. This often leads to the stabilization of emergent orders that are highly sensitive to external physical stimuli promising opportunities for technological applications. In perovskite ruthenates, this sensitivity manifests in dramatic changes of the physical properties with subtle structural details of the RuO$_6$ octahedra, stabilizing enigmatic correlated ground states, from a hotly debated superconducting state via electronic nematicity and metamagnetic quantum criticality to ferromagnetism. Here, it is demonstrated that the rotation of the RuO$_6$ octahedra in the surface layer of Sr$_2$RuO$_4$ generates new emergent orders not observed in the bulk material. Through atomic-scale spectroscopic characterization of the low-energy electronic states, four van Hove singularities are identified in the vicinity of the Fermi energy. The singularities can be directly linked to intertwined nematic and checkerboard charge order. Tuning of one of these van Hove singularities by magnetic field is demonstrated, suggesting that the surface layer undergoes a Lifshitz transition at a magnetic field of ~32T. The results establish the surface layer of Sr$_2$RuO$_4$ as an exciting 2D correlated electron system and highlight the opportunities for engineering the low-energy electronic states in these systems.
△ Less
Submitted 24 May, 2023; v1 submitted 30 April, 2020;
originally announced May 2020.
-
Ultralow friction of ink-jet printed graphene flakes
Authors:
R. Buzio,
A. Gerbi,
S. Uttiya,
C. Bernini,
A. E. Del Rio Castillo,
F. Palazon,
A. S. Siri,
V. Pellegrini,
L. Pellegrino,
F. Bonaccorso
Abstract:
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies in…
▽ More
We report the frictional response of few-layer graphene (FLG) flakes obtained by liquid phase exfoliation (LPE) of pristine graphite. To this end, we inkjet print FLG on bare and hexamethyldisilazane-terminated SiO2 substrates, producing micrometric patterns with nanoscopic roughness that are investigated by atomic force microscopy. Normal force spectroscopy and atomically resolved morphologies indicate reduced surface contamination by solvents after a vacuum annealing procedure. Notably, the printed FLG flakes show ultralow friction comparable with micromechanically exfoliated graphene flakes. Lubricity is retained on flakes with lateral size of a few tens of nanometres, and with thickness as small as ~ 2 nm, confirming the high crystalline quality and low defects density in the FLG basal plane. Surface exposed step edges exhibit the highest friction values, representing preferential sites for originating secondary dissipative processes related to edge straining, wear or lateral displacement of the flakes. Our work demonstrates that LPE enables fundamental studies on graphene friction to the single-flake level. The capability to deliver ultralow-friction-graphene over technologically relevant substrates, using a scalable production route and a high-throughput, large-area printing technique, may also open up new opportunities in the lubrication of micro- and nano-electromechanical systems.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Ninomiya-Victoir scheme : strong convergence properties and discretization of the involved Ordinary Differential Equations
Authors:
Anis Al Gerbi,
Benjamin Jourdain,
Emmanuelle Clément
Abstract:
In this paper, we summarize the results about the strong convergence rate of the Ninomiya-Victoir scheme and the stable convergence in law of its normalized error that we obtained in previous papers. We then recall the properties of the multilevel Monte Carlo estimators involving this scheme that we introduced and studied before. Last, we are interested in the error introduced by discretizing the…
▽ More
In this paper, we summarize the results about the strong convergence rate of the Ninomiya-Victoir scheme and the stable convergence in law of its normalized error that we obtained in previous papers. We then recall the properties of the multilevel Monte Carlo estimators involving this scheme that we introduced and studied before. Last, we are interested in the error introduced by discretizing the ordinary differential equations involved in the Ninomiya-Victoir scheme. We prove that this error converges with strong order 2 when an explicit Runge-Kutta method with order 4 (resp. 2) is used for the ODEs corresponding to the Brownian (resp. Stratonovich drift) vector fields. We thus relax the order 5 for the Brownian ODEs needed by Ninomiya and Ninomiya (2009) to obtain the same order of strong convergence. Moreover, the properties of our multilevel Monte-Carlo estimators are preserved when these Runge-Kutta methods are used.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Asymptotic error distribution for the Ninomiya-Victoir scheme in the commutative case
Authors:
Anis Al Gerbi,
Benjamin Jourdain,
Emmanuelle Clément
Abstract:
In a previous work, we proved strong convergence with order $1$ of the Ninomiya-Victoir scheme $X^{NV}$ with time step $T/N$ to the solution $X$ of the limiting SDE when the Brownian vector fields commute. In this paper, we prove that the normalized error process $N \left(X - X^{NV}\right)$ converges to an affine SDE with source terms involving the Lie brackets between the Brownian vector fields a…
▽ More
In a previous work, we proved strong convergence with order $1$ of the Ninomiya-Victoir scheme $X^{NV}$ with time step $T/N$ to the solution $X$ of the limiting SDE when the Brownian vector fields commute. In this paper, we prove that the normalized error process $N \left(X - X^{NV}\right)$ converges to an affine SDE with source terms involving the Lie brackets between the Brownian vector fields and the drift vector field. This result ensures that the strong convergence rate is actually $1$ when the Brownian vector fields commute, but at least one of them does not commute with the drift vector field. When all the vector fields commute the limit vanishes. Our result is consistent with the fact that the Ninomiya-Victoir scheme solves the SDE in this case.
△ Less
Submitted 26 May, 2016;
originally announced May 2016.
-
CDW slips and giant frictional dissipation peaks at the NbSe$_2$ surface
Authors:
Markus Langer,
Marcin Kisiel,
Rémy Pawlak,
Franco Pellegrini,
Giuseppe E. Santoro,
Renato Buzio,
Andrea Gerbi,
Geetha Balakrishnan,
Alexis Baratoff,
Erio Tosatti,
Ernst Meyer
Abstract:
Accessing, controlling and understanding nanoscale friction and dissipation is a crucial issue in nanotechnology, where moving elements are central. Recently, ultra-sensitive noncontact pendulum Atomic Force Microscope (AFM) succeeded in detecting the electronic friction drop caused by the onset of superconductivity in Nb, raising hopes that a wider variety of mechanisms of mechanical dissipation…
▽ More
Accessing, controlling and understanding nanoscale friction and dissipation is a crucial issue in nanotechnology, where moving elements are central. Recently, ultra-sensitive noncontact pendulum Atomic Force Microscope (AFM) succeeded in detecting the electronic friction drop caused by the onset of superconductivity in Nb, raising hopes that a wider variety of mechanisms of mechanical dissipation arising from electron organization into different collective phenomena will become accessible through this unconventional surface probe. Among them, the driven phase dynamics of charge-density-waves (CDWs) represents an outstanding challenge as a source of dissipation. Here we report a striking multiplet of AFM dissipation peaks arising at nanometer distances above the surface of NbSe$_2$ - a layered compound exhibiting an incommensurate CDW. Each peak appears at a well defined tip-surface interaction force of the order of a nN, and persists until T=70K where CDW short-range order is known to disappear. A theoretical model is presented showing that the peaks are connected to tip-induced local 2$π$ CDW phase slips. Under the attractive potential of the approaching tip, the local CDW surface phase landscape deforms continuously until a series of 2$π$ jumps occur between different values of the local phase. As the tip oscillates to and fro, each slip gives rise to a hysteresis cycle, appearing at a selected distance, the dissipation corresponding to "pum**" in and out a local slip in the surface CDW phase of NbSe$_2$.
△ Less
Submitted 12 May, 2016;
originally announced May 2016.
-
Asymptotics for the normalized error of the Ninomiya-Victoir scheme
Authors:
Anis Al Gerbi,
Benjamin Jourdain,
Emmanuelle Clément
Abstract:
In a previous work, we proved strong convergence with order $1/2$ of the Ninomiya-Victoir scheme $X^{NV,η}$ with time step $T/N$ to the solution $X$ of the limiting SDE. In this paper we check that the normalized error defined by $\sqrt{N}\left(X - X^{NV,η}\right)$ converges to an affine SDE with source terms involving the Lie brackets between the Brownian vector fields. The limit does not depend…
▽ More
In a previous work, we proved strong convergence with order $1/2$ of the Ninomiya-Victoir scheme $X^{NV,η}$ with time step $T/N$ to the solution $X$ of the limiting SDE. In this paper we check that the normalized error defined by $\sqrt{N}\left(X - X^{NV,η}\right)$ converges to an affine SDE with source terms involving the Lie brackets between the Brownian vector fields. The limit does not depend on the Rademacher random variables $η$. This result can be seen as a first step to adapt to the Ninomiya-Victoir scheme the central limit theorem of Lindeberg Feller type, derived by M. Ben Alaya and A. Kebaier for the multilevel Monte Carlo estimator based on the Euler scheme. When the Brownian vector fields commute, the limit vanishes. This suggests that the rate of convergence is greater than $1/2$ in this case and we actually prove strong convergence with order $1$.
△ Less
Submitted 3 February, 2016; v1 submitted 20 January, 2016;
originally announced January 2016.
-
Ninomiya-Victoir scheme: strong convergence, antithetic version and application to multilevel estimators
Authors:
Anis Al Gerbi,
Benjamin Jourdain,
Emmanuelle Clément
Abstract:
In this paper, we are interested in the strong convergence properties of the Ninomiya-Victoir scheme which is known to exhibit weak convergence with order 2. We prove strong convergence with order $1/2$. This study is aimed at analysing the use of this scheme either at each level or only at the finest level of a multilevel Monte Carlo estimator: indeed, the variance of a multilevel Monte Carlo est…
▽ More
In this paper, we are interested in the strong convergence properties of the Ninomiya-Victoir scheme which is known to exhibit weak convergence with order 2. We prove strong convergence with order $1/2$. This study is aimed at analysing the use of this scheme either at each level or only at the finest level of a multilevel Monte Carlo estimator: indeed, the variance of a multilevel Monte Carlo estimator is related to the strong error between the two schemes used on the coarse and fine grids at each level. Recently, Giles and Szpruch proposed a scheme permitting to construct a multilevel Monte Carlo estimator achieving the optimal complexity $O\left(ε^{-2}\right)$ for the precision $ε$. In the same spirit, we propose a modified Ninomiya-Victoir scheme, which may be strongly coupled with order $1$ to the Giles-Szpruch scheme at the finest level of a multilevel Monte Carlo estimator. Numerical experiments show that this choice improves the efficiency, since the order $2$ of weak convergence of the Ninomiya-Victoir scheme permits to reduce the number of discretization levels.
△ Less
Submitted 7 October, 2015; v1 submitted 26 August, 2015;
originally announced August 2015.
-
Noncontact dissipation reveals critical central peak in SrTiO3
Authors:
M. Kisiel,
F. Pellegrini,
G. E. Santoro,
M. Samadashvili,
R. Pawlak,
A. Benassi,
U. Gysin,
R. Buzio,
A. Gerbi,
E. Meyer,
E. Tosatti
Abstract:
The critical fluctuations at second order structural transitions in a bulk crystal may affect the dissipation of mechanical probes even if completely external to the crystal surface. Here we show that noncontact force microscope dissipation bears clear evidence of the antiferrodistortive phase transition of SrTiO3, known for a long time to exhibit a unique, extremely narrow neutron scattering "cen…
▽ More
The critical fluctuations at second order structural transitions in a bulk crystal may affect the dissipation of mechanical probes even if completely external to the crystal surface. Here we show that noncontact force microscope dissipation bears clear evidence of the antiferrodistortive phase transition of SrTiO3, known for a long time to exhibit a unique, extremely narrow neutron scattering "central peak". The noncontact geometry suggests a central peak linear response coupling connected with strain. The detailed temperature dependence reveals for the first time the intrinsic central peak width of order 80 kHz, two orders of magnitude below the established neutron upper bound.
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
Tc=21K in epitaxial FeSe0.5Te0.5 thin films with biaxial compressive strain
Authors:
E. Bellingeri,
I. Pallecchi,
R. Buzio,
A. Gerbi,
D. Marre',
M. R. Cimberle,
M. Tropeano,
M. Putti,
A. Palenzona,
C. Ferdeghini
Abstract:
High purity epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by Pulsed Laser Ablation on different substrates. By varying the film thickness, Tc up to 21K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the import…
▽ More
High purity epitaxial FeSe0.5Te0.5 thin films with different thickness were grown by Pulsed Laser Ablation on different substrates. By varying the film thickness, Tc up to 21K were observed, significantly larger than the bulk value. Structural analyses indicated that the a axis changes significantly with the film thickness and is linearly related to the Tc. The latter result indicates the important role of the compressive strain in enhancing Tc. Tc is also related to both the Fe-(Se,Te) bond length and angle, suggesting the possibility of further enhancement.
△ Less
Submitted 4 December, 2009;
originally announced December 2009.
-
High quality epitaxial FeSe0.5Te0.5 thin films grown on SrTiO3 substrates by pulsed laser deposition
Authors:
E. Bellingeri,
R. Buzio,
A. Gerbi,
D. Marre',
S. Congiu,
M. R. Cimberle,
M. Tropeano,
A. S. Siri,
A. Palenzona C. Ferdeghini
Abstract:
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature dur…
▽ More
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental techniques: X-rays diffraction, reflection high energy electron diffraction, scanning tunnelling microscopy and atomic force microscopy. The substrate temperature during the deposition was found to be the main parameter governing sample morphology and superconducting critical temperature. Films obtained in the optimal conditions show an epitaxial growth with c axis perpendicular to the film surface and the a and b axis parallel to the substrates one, without the evidence of any other orientation. Moreover, such films show a metallic behavior over the whole measured temperature range and critical temperature above 17K, which is higher than the target one.
△ Less
Submitted 17 June, 2009;
originally announced June 2009.
