-
On the absence of structure factors in concentrated colloidal suspensions and nanocomposites
Authors:
Anne-Caroline Genix,
Julian Oberdisse
Abstract:
Small-angle scattering is a commonly used tool to analyze the dispersion of nanoparticles in all kinds of matrices. Besides some obvious cases, the associated structure factor is often complex and cannot be reduced to a simple interparticle interaction, like excluded volume only. In recent experiments, we have encountered a surprising absence of structure factors (S(q) = 1) in scattering from rath…
▽ More
Small-angle scattering is a commonly used tool to analyze the dispersion of nanoparticles in all kinds of matrices. Besides some obvious cases, the associated structure factor is often complex and cannot be reduced to a simple interparticle interaction, like excluded volume only. In recent experiments, we have encountered a surprising absence of structure factors (S(q) = 1) in scattering from rather concentrated polymer nanocomposites [A.-C. Genix et al, ACS Appl. Mater. Interfaces 11 (2019) 17863]. In this case, quite pure form factor scattering is observed. This somewhat ``ideal'' structure is further investigated here making use of reverse Monte Carlo simulations in order to shed light on the corresponding nanoparticle structure in space. By fixing the target ``experimental'' apparent structure factor to one over a given q-range in these simulations, we show that it is possible to find dispersions with this property. The influence of nanoparticle volume fraction and polydispersity has been investigated, and it was found that for high concentrations only a high polydispersity allows reaching a state of S = 1. The underlying structure in real space is discussed in terms of the pair-correlation function, which evidences the importance of attractive interactions between polydisperse nanoparticles. The calculation of partial structure factors shows that there is no specific ordering of large or small particles, but that the presence of attractive interactions together with polydispersity allows reaching an almost ``structureless'' state.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
How Tuning Interfaces Impacts the Dynamics and Structure of Polymer Nanocomposites Simultaneously
Authors:
Anne-Caroline Genix,
Vera Bocharova,
Bobby Carroll,
Philippe Dieudonné-George,
Edouard Chauveau,
Alexei Sokolov,
Julian Oberdisse
Abstract:
Fundamental understanding of macroscopic properties of polymer nanocomposites (PNCs) remains difficult due to the complex interplay of microscopic dynamics and structure, namely interfacial layer relaxations and three-dimensional nanoparticle arrangements. The effect of surface modification by alkyl methoxysilanes at different grafting densities has been studied in PNCs made of poly(2-vinylpyridin…
▽ More
Fundamental understanding of macroscopic properties of polymer nanocomposites (PNCs) remains difficult due to the complex interplay of microscopic dynamics and structure, namely interfacial layer relaxations and three-dimensional nanoparticle arrangements. The effect of surface modification by alkyl methoxysilanes at different grafting densities has been studied in PNCs made of poly(2-vinylpyridine) and spherical 20 nm silica nanoparticles (NPs). The segmental dynamics has been probed by broadband dielectric spectroscopy, and the filler structure by small-angle X-ray scattering and reverse Monte Carlo simulations. By combining the particle configurations with the interfacial layer properties, it is shown how surface modification tunes the attractive polymer-particle interactions: bare NPs slow down the polymer interfacial layer dynamics over a thickness of ca. 5 nm, while grafting screens these interactions. Our analysis of interparticle spacing and segmental dynamics provides unprecedented insight into the effect of surface modification on the main characteristics of PNCs: particle interactions and polymer interfacial layers.
△ Less
Submitted 23 October, 2023;
originally announced October 2023.
-
Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics
Authors:
Anne-Caroline Genix,
Vera Bocharova,
Bobby Carroll,
Philippe Dieudonné-George,
Edouard Chauveau,
Alexei Sokolov,
Julian Oberdisse
Abstract:
Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combi…
▽ More
Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C8) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C18) and shorter (C8) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C8-grafting allows for a more progressive tuning, which goes beyond a pure mass effect.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Partition of Coating Agents between Nanoparticle Interfaces and the Polymer in Nanocomposites
Authors:
Dafne Musino,
Julian Oberdisse,
Michael Sztucki,
Angel Alegria,
Anne-Caroline Genix
Abstract:
Industrial and model polymer nanocomposites are often formulated with coating agents to improve polymer-nanoparticle (NP) compatibility. Here the localization of silane coating agents in styrene-butadiene nanocomposite is investigated through the segmental dynamics of the polymer matrix by broadband dielectric spectroscopy (BDS), allowing the detection of silanes in the matrix through their plasti…
▽ More
Industrial and model polymer nanocomposites are often formulated with coating agents to improve polymer-nanoparticle (NP) compatibility. Here the localization of silane coating agents in styrene-butadiene nanocomposite is investigated through the segmental dynamics of the polymer matrix by broadband dielectric spectroscopy (BDS), allowing the detection of silanes in the matrix through their plasticization effect. This acceleration of dynamics was followed via the shift of $τ$max of the $α$-relaxation induced by the presence of coating agents of different molecular weight and quantity, for different amounts of incorporated colloidal silica NPs (R $\approx$ 12.5 nm, polydispersity 12%). Any noteworthy contribution of interfacial polymer layers on $τ$max has been excluded by reference measurements with bare NPs. Our approach allowed quantifying the partition between the matrix and the NP interfaces, and was confirmed independently by calorimetry. As a control parameter, the silane grafting reaction could be activated or not, which was confirmed by the absence (resp. presence) of partitioning with the matrix. Our main result is that in the first steps of material formulation, before any grafting reaction, coating agents both cover the silica surface by adsorption and mix with the polymer matrix-in particular if the latter has chemical compatibility via its functional groups. Silane adsorption was found to be comparable to the grafted amount (1.1 nm-2), and does not increase further, confirming that the plateau of the adsorption isotherm is reached in industrial formulations. These results are hoped to contribute to a better understanding of the surface reactions taking place during complex formulation processes of nanocomposites, namely the exact amounts at stake, e.g., in industrial mixers. Final material properties are affected both through NP-matrix compatibility and plasticization of the latter by unreacted molecules. 2
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Rejuvenating the structure and rheological properties of silica nanocomposites based on natural rubber
Authors:
Kanyarat Boonsomwong,
Anne-Caroline Genix,
Edouard Chauveau,
Jean-Marc Fromental,
Philippe Dieudonne-George,
Chakrit Sirisinha,
Julian Oberdisse
Abstract:
The antagonistic effect of processing and thermal annealing on both the filler structure and the polymer matrix is explored in polymer nanocomposites based on natural rubber with precipitated silica incorporated by coagulation from aqueous suspension followed by roll-milling. Their structure and linear and non-linear rheology have been studied, with a particular emphasis on the effect of high temp…
▽ More
The antagonistic effect of processing and thermal annealing on both the filler structure and the polymer matrix is explored in polymer nanocomposites based on natural rubber with precipitated silica incorporated by coagulation from aqueous suspension followed by roll-milling. Their structure and linear and non-linear rheology have been studied, with a particular emphasis on the effect of high temperature thermal treatment and the number of milling passes. Small-angle X-ray scattering intensities show that the silica is organized in small, unbreakable aggregates containing ca. 50 primary nanoparticles, which are reorganized on a larger scale in filler networks percolating at the highest silica contents. As expected, the filler network structure is found to be sensitive to milling, more milling inducing rupture, as evidenced by the decreasing Payne effect. After thermal treatment, the nanocomposite structure is found to be rejuvenated, erasing the effect of the previous milling on the low-strain modulus. In parallel, the dynamics of the samples described by the rheology or the calorimetric glass-transition temperature remain unchanged, whereas the natural latex polymer network structure is modified by milling towards a more fluid-like rheology, and cannot be recovered.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Aggregate Formation of Surface-Modified Nanoparticles in Solvents and Polymer Nanocomposites
Authors:
Dafne Musino,
Anne-Caroline Genix,
Thomas Chaussee,
Laurent Guy,
Natalia Meissner,
Radoslaw Kozak,
Thomas Bizien,
Julian Oberdisse
Abstract:
A new method based on the combination of small-anglescattering, reverse Monte Carlo simulations, and an aggregate recognition algorithm is proposed to characterize the structure of nanoparticle suspensions in solvents and polymer nanocomposites, allowing detailedstudies of the impact of different nanoparticle surface modifications.Experimental small-angle scattering is reproduced using simulated a…
▽ More
A new method based on the combination of small-anglescattering, reverse Monte Carlo simulations, and an aggregate recognition algorithm is proposed to characterize the structure of nanoparticle suspensions in solvents and polymer nanocomposites, allowing detailedstudies of the impact of different nanoparticle surface modifications.Experimental small-angle scattering is reproduced using simulated annealing of configurations of polydisperse particles in a simulation box compatible with the lowest experimental q-vector. Then, properties of interest likeaggregation states are extracted from these configurations and averaged. This approach has been applied to silane surface-modified silica nanoparticles with different grafting groups, in solvents and after casting into polymer matrices.It is shown that the chemistry of the silane function, in particular mono- or trifunctionality possibly related to patch formation, affects the dispersion state in a given medium, in spite of an unchanged alkylchain length. Our approach may be applied to study any dispersion or aggregation state of nanoparticles. Concerningnanocomposites, the method has potential impact on the design of new formulations allowing controlled tuning of nanoparticle dispersion.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Core-Shell Microgel-Based Surface Coatings with Linear Thermoresponse
Authors:
Marian Cors,
Oliver Wrede,
Anne-Caroline Genix,
Dario Anselmetti,
Julian Oberdisse,
Thomas Hellweg
Abstract:
We study the swelling and shrinking behavior of core-shell microgels adsorbed on silicon wafers. In these systems, the core is made of cross-linked poly(N isopropylmethacrylamide) and the shell consists of cross linked poly(N-n propylacrylamide). In suspension, these particles exhibit an extended linear swelling behavior in the temperature interval between the lower critical solution temperatures…
▽ More
We study the swelling and shrinking behavior of core-shell microgels adsorbed on silicon wafers. In these systems, the core is made of cross-linked poly(N isopropylmethacrylamide) and the shell consists of cross linked poly(N-n propylacrylamide). In suspension, these particles exhibit an extended linear swelling behavior in the temperature interval between the lower critical solution temperatures of the two polymers. Using ellipsometry and AFM, we show that this linear response is also observed in the adsorbed state.
△ Less
Submitted 21 November, 2018;
originally announced November 2018.
-
Recent advances in structural and dynamical propertiesof simplified industrial nanocomposites
Authors:
Anne-Caroline Genix,
Guilhem P. Baeza,
Julian Oberdisse
Abstract:
A large body of experimental work on the microstructure and dynamics of simplifiedindustrial nanocomposites made of disordered silica filler in a styrene-butadiene matrixby solid-phase mixing is regrouped and critically discussed in this feature article. Recentresults encompass systems with varying polymer mass, grafting functionality, and fillercontent. They have been obtained by simulation-based…
▽ More
A large body of experimental work on the microstructure and dynamics of simplifiedindustrial nanocomposites made of disordered silica filler in a styrene-butadiene matrixby solid-phase mixing is regrouped and critically discussed in this feature article. Recentresults encompass systems with varying polymer mass, grafting functionality, and fillercontent. They have been obtained by simulation-based structural modelling of nanoparticleaggregate size and mass deduced from small-angle scattering and transmission electronmicroscopy. Our model has been validated by independent swelling experiments.Comparison of structurally-close nanocomposites of widely different chain mass led tothe identification of a unique structure-determining parameter, the grafting density, aswell as to a unified picture of aggregate formation mechanisms in complex nanocompositesduring mixing. In addition, low-field proton NMR allowed for the characterization ofdynamically slowed-down ('glassy') polymer layers, which were shown not to dominatethe rheological response, unlike the structural contribution. Finally, broadband dielectricspectroscopy was used in an innovative manner to identify filler percolation -- also identifiedby rheology -- via dynamics along filler surfaces.
△ Less
Submitted 20 November, 2018;
originally announced November 2018.
-
Tuning Structure and Rheology of Silica-Latex Nanocomposites with the Molecular Weight of Matrix Chains: A Coupled SAXS-TEM-Simulation Approach
Authors:
Amélie Banc,
Anne-Caroline Genix,
Mathieu CHIRAT,
Christelle Dupas,
Sylvain Caillol,
Michael Sztucki,
Julian OBERDISSE
Abstract:
The structure of silica-latex nanocomposites of three matrix chain masses (20, 50, and 160 kg/mol of poly(ethyl methacrylate)) are studied using a SAXS/TEM approach, coupled via Monte Carlo simulations of scattering of fully polydisperse silica nanoparticle aggregates. At low silica concentrations (1 vol. %), the impact of the matrix chain mass on the structure is quantified in terms of the aggreg…
▽ More
The structure of silica-latex nanocomposites of three matrix chain masses (20, 50, and 160 kg/mol of poly(ethyl methacrylate)) are studied using a SAXS/TEM approach, coupled via Monte Carlo simulations of scattering of fully polydisperse silica nanoparticle aggregates. At low silica concentrations (1 vol. %), the impact of the matrix chain mass on the structure is quantified in terms of the aggregation number distribution function, highest mass leading to individual dispersion, whereas the lower masses favor the formation of small aggregates. Both simulations for SAXS and TEM give compatible aggregate compacities around 10 vol. %, indicating that the construction algorithm for aggregates is realistic. Our results on structure are rationalized in terms of the critical collision time between nanoparticles due to diffusion in viscous matrices. At higher concentrations, aggregates overlap and form a percolated network, with a smaller and lighter mesh in the presence of high mass polymers. The linear rheology is investigated with oscillatory shear experiments. It shows a feature related to the silica structure at low frequencies, the amplitude of which can be described by two power laws separated by the percolation threshold of aggregates.
△ Less
Submitted 21 May, 2014;
originally announced May 2014.
-
Multiscale Filler Structure in Simplified Industrial Nanocomposite Silica/SBR Systems Studied by SAXS and TEM
Authors:
Guilhem Baeza,
ANNE-CAROLINE GENIX,
Christophe Degrandcourt,
Laurent Petitjean,
Jérémie Gummel,
Marc Couty,
Julian OBERDISSE
Abstract:
Simplified silica (Zeosil 1165 MP) and SBR (140k carrying silanol end-groups) nanocomposites have been formulated by mixing of a reduced number of ingredients with respect to industrial applications. The thermo-mechanical history of the samples during the mixing process was monitored and adjusted to identical final temperatures. The filler structure on large scales up to micrometers was studied by…
▽ More
Simplified silica (Zeosil 1165 MP) and SBR (140k carrying silanol end-groups) nanocomposites have been formulated by mixing of a reduced number of ingredients with respect to industrial applications. The thermo-mechanical history of the samples during the mixing process was monitored and adjusted to identical final temperatures. The filler structure on large scales up to micrometers was studied by transmission electron microscopy (TEM) and very small-angle X-ray scattering (SAXS). A complete quantitative model extending from the primary silica nanoparticle (of radius \approx 10 nm), to nanoparticles aggregates, up to micrometer-sized branches with typical lateral dimension of 150 nm is proposed. Image analysis of the TEM-pictures yields the fraction of zones of pure polymer, which extend between the branches of a large-scale filler network. This network is compatible with a fractal of average dimension 2.4 as measured by scattering. On smaller length scales, inside the branches, small silica aggregates are present. Their average radius has been deduced from a Kratky analysis, and it ranges between 35 and 40 nm for all silica fractions investigated here (φ_si = 8-21% vol.). A central piece of our analysis is the description of the interaggregate interaction by a simulated structure factor for polydisperse spheres representing aggregates. A polydispersity of 30% in aggregate size is assumed, and interactions between these aggregates are described with a hard core repulsive potential. The same distribution in size is used to evaluate the polydisperse form factor. Comparison with the experimental intensity leads to the determination of the average aggregate compacity (assumed identical for all aggregates in the distribution, between 31% and 38% depending on φ_si), and thus aggregation number (ca. 45, with a large spread). Because of the effect of aggregate compacity and of pure polymer zones, the volume fraction of aggregates is higher in the branches than φ_si. The repulsion between aggregates has a strong effect on the apparent isothermal compressibility: it leads to a characteristic low-q depression, which cannot be interpreted as aggregate mass decrease in our data. In addition, the reinforcement effect of these silica structures in the SBR-matrix is characterized with oscillatory shear and described with a model based on the same aggregate compacity. Finally, our results show that it is possible to analyze the complex structure of interacting aggregates in nanocomposites of industrial origin in a self-consistent and quantitative manner.
△ Less
Submitted 20 December, 2012;
originally announced December 2012.
-
Modeling of Intermediate Structures and Chain Conformation in Silica-Latex Nanocomposites Observed by SANS During Annealing
Authors:
Anne-Caroline Genix,
Mouna TATOU,
Ainara Imaz,
Jacqueline Forcada,
Ralph Schweins,
Isabelle Grillo,
Julian Oberdisse
Abstract:
The evolution of the polymer structure during nanocomposite formation and annealing of silica-latex nanocomposites is studied using contrast-variation small angle neutron scattering. The experimental system is made of silica nanoparticles (Rsi \approx 8 nm) and a mixture of purpose-synthesized hydrogenated and deuterated nanolatex (Rlatex \approx 12.5 nm). The progressive disappearance of the late…
▽ More
The evolution of the polymer structure during nanocomposite formation and annealing of silica-latex nanocomposites is studied using contrast-variation small angle neutron scattering. The experimental system is made of silica nanoparticles (Rsi \approx 8 nm) and a mixture of purpose-synthesized hydrogenated and deuterated nanolatex (Rlatex \approx 12.5 nm). The progressive disappearance of the latex beads by chain interdiffusion and release in the nanocomposites is analyzed quantitatively with a model for the scattered intensity of hairy latex beads and an RPA description of the free chains. In silica-free matrices and nanocomposites of low silica content (7%v), the annealing procedure over weeks at up to Tg + 85 K results in a molecular dispersion of chains, the radius of gyration of which is reported. At higher silica content (20%v), chain interdiffusion seems to be slowed down on time-scales of weeks, reaching a molecular dispersion only at the strongest annealing. Chain radii of gyration are found to be unaffected by the presence of the silica filler.
△ Less
Submitted 29 February, 2012;
originally announced February 2012.