Showing 1–16 of 16 results for author: Gee, M

Estimation of fatigue life of TiN coatings using cyclic micro-impact testing

Authors: Abdalrhaman Koko, Elsiddig Elmukashf, Tony Fry, Mark Gee, Hannah Zhang

Abstract: This paper studies the behaviour of a thin titanium nitride (TiN) coating (1.5 um thick) on a tool steel substrate material under dynamic and cyclic impacts through an approach combining experimental testing and computational modelling. Dynamic impact testing was used to investigate the load-dependent dynamic hardness and assess the energy-dissipation capabilities of the coating system. In cyclic… ▽ More This paper studies the behaviour of a thin titanium nitride (TiN) coating (1.5 um thick) on a tool steel substrate material under dynamic and cyclic impacts through an approach combining experimental testing and computational modelling. Dynamic impact testing was used to investigate the load-dependent dynamic hardness and assess the energy-dissipation capabilities of the coating system. In cyclic impact tests, the materials experienced permanent plastic deformation in each cycle, ultimately leading to coating failure. Chemical analysis identified an interlayer between the coating and the substrate, while cross-sectional analysis revealed the extent of coating damage due to cycling and impact load. A three-dimensional map was constructed, connecting the acceleration load, sensed depth, and cycles to the coating failure, and an empirical equation used to characterize the relationship between the depth and cycles to failure. The computational model examined the traction component distribution during loading and unloading, with a focus on normal and shear tractions. These findings suggested the potential significance of normal traction in the interfacial fatigue failure due to impact. △ Less

Submitted 6 May, 2024; v1 submitted 26 September, 2023; originally announced September 2023.

Zero-DeepSub: Zero-Shot Deep Subspace Reconstruction for Rapid Multiparametric Quantitative MRI Using 3D-QALAS

Authors: Yohan Jun, Yamin Arefeen, Jae** Cho, Shohei Fujita, Xiaoqing Wang, P. Ellen Grant, Borjan Gagoski, Camilo Jaimes, Michael S. Gee, Berkin Bilgic

Abstract: Purpose: To develop and evaluate methods for 1) reconstructing 3D-quantification using an interleaved Look-Locker acquisition sequence with T2 preparation pulse (3D-QALAS) time-series images using a low-rank subspace method, which enables accurate and rapid T1 and T2 map**, and 2) improving the fidelity of subspace QALAS by combining scan-specific deep-learning-based reconstruction and subspace… ▽ More Purpose: To develop and evaluate methods for 1) reconstructing 3D-quantification using an interleaved Look-Locker acquisition sequence with T2 preparation pulse (3D-QALAS) time-series images using a low-rank subspace method, which enables accurate and rapid T1 and T2 map**, and 2) improving the fidelity of subspace QALAS by combining scan-specific deep-learning-based reconstruction and subspace modeling. Methods: A low-rank subspace method for 3D-QALAS (i.e., subspace QALAS) and zero-shot deep-learning subspace method (i.e., Zero-DeepSub) were proposed for rapid and high fidelity T1 and T2 map** and time-resolved imaging using 3D-QALAS. Using an ISMRM/NIST system phantom, the accuracy and reproducibility of the T1 and T2 maps estimated using the proposed methods were evaluated by comparing them with reference techniques. The reconstruction performance of the proposed subspace QALAS using Zero-DeepSub was evaluated in vivo and compared with conventional QALAS at high reduction factors of up to 9-fold. Results: Phantom experiments showed that subspace QALAS had good linearity with respect to the reference methods while reducing biases and improving precision compared to conventional QALAS, especially for T2 maps. Moreover, in vivo results demonstrated that subspace QALAS had better g-factor maps and could reduce voxel blurring, noise, and artifacts compared to conventional QALAS and showed robust performance at up to 9-fold acceleration with Zero-DeepSub, which enabled whole-brain T1, T2, and PD map** at 1 mm isotropic resolution within 2 min of scan time. Conclusion: The proposed subspace QALAS along with Zero-DeepSub enabled high fidelity and rapid whole-brain multiparametric quantification and time-resolved imaging. △ Less

Submitted 23 January, 2024; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: 24 figures, 4 tables

SSL-QALAS: Self-Supervised Learning for Rapid Multiparameter Estimation in Quantitative MRI Using 3D-QALAS

Authors: Yohan Jun, Jae** Cho, Xiaoqing Wang, Michael Gee, P. Ellen Grant, Berkin Bilgic, Borjan Gagoski

Abstract: Purpose: To develop and evaluate a method for rapid estimation of multiparametric T1, T2, proton density (PD), and inversion efficiency (IE) maps from 3D-quantification using an interleaved Look-Locker acquisition sequence with T2 preparation pulse (3D-QALAS) measurements using self-supervised learning (SSL) without the need for an external dictionary. Methods: A SSL-based QALAS map** method (SS… ▽ More Purpose: To develop and evaluate a method for rapid estimation of multiparametric T1, T2, proton density (PD), and inversion efficiency (IE) maps from 3D-quantification using an interleaved Look-Locker acquisition sequence with T2 preparation pulse (3D-QALAS) measurements using self-supervised learning (SSL) without the need for an external dictionary. Methods: A SSL-based QALAS map** method (SSL-QALAS) was developed for rapid and dictionary-free estimation of multiparametric maps from 3D-QALAS measurements. The accuracy of the reconstructed quantitative maps using dictionary matching and SSL-QALAS was evaluated by comparing the estimated T1 and T2 values with those obtained from the reference methods on an ISMRM/NIST phantom. The SSL-QALAS and the dictionary matching methods were also compared in vivo, and generalizability was evaluated by comparing the scan-specific, pre-trained, and transfer learning models. Results: Phantom experiments showed that both the dictionary matching and SSL-QALAS methods produced T1 and T2 estimates that had a strong linear agreement with the reference values in the ISMRM/NIST phantom. Further, SSL-QALAS showed similar performance with dictionary matching in reconstructing the T1, T2, PD, and IE maps on in vivo data. Rapid reconstruction of multiparametric maps was enabled by inferring the data using a pre-trained SSL-QALAS model within 10 s. Fast scan-specific tuning was also demonstrated by fine-tuning the pre-trained model with the target subject's data within 15 min. Conclusion: The proposed SSL-QALAS method enabled rapid reconstruction of multiparametric maps from 3D-QALAS measurements without an external dictionary or labeled ground-truth training data. △ Less

Submitted 23 January, 2024; v1 submitted 27 February, 2023; originally announced February 2023.

Comments: 18 figures, 4 tables

A Systems Engineering Approach to Modeling and Analysis of Chronic Obstructive Pulmonary Disease (COPD)

Authors: Varghese Kurian, Navid Ghadipasha, Michelle Gee, Anais Chalant, Teresa Hamill, Alphonse Okossi, Lucy Chen, Bin Yu, Babatunde A. Ogunnaike, Antony N. Beris

Abstract: Chronic Obstructive Pulmonary Disease (COPD) is a progressive lung disease characterized by airflow limitation. This study develops a systems engineering framework for representing important mechanistic details of COPD in a model of the cardio-respiratory system. In this model, we present the cardio-respiratory system as an integrated biological control system responsible for regulating breathing.… ▽ More Chronic Obstructive Pulmonary Disease (COPD) is a progressive lung disease characterized by airflow limitation. This study develops a systems engineering framework for representing important mechanistic details of COPD in a model of the cardio-respiratory system. In this model, we present the cardio-respiratory system as an integrated biological control system responsible for regulating breathing. Four engineering control system components are considered: sensor, controller, actuator, and the process itself. Knowledge of human anatomy and physiology is used to develop appropriate mechanistic mathematical models for each component. Following a systematic analysis of the computational model, we identify three physiological parameters associated with reproducing clinical manifestations of COPD - changes in the forced expiratory volume (FEV), lung volumes, and pulmonary hypertension. We quantify the changes in these parameters (airway resistance, lung elastance, and pulmonary resistance) as the ones that result in a systemic response that is diagnostic of COPD. A multivariate analysis reveals that the changes in airway resistance have a broad impact on the human cardio-respiratory system, and that the pulmonary circuit is stressed beyond normal under hypoxic environments in most COPD patients. △ Less

Submitted 26 December, 2022; originally announced December 2022.

Comments: 25 pages, 15 figures

A ZTF Look at Optical Variability of Young Stellar Objects in the North America and Pelican Nebulae Complex

Authors: Lynne A. Hillenbrand, Thaddaeus J. Kiker, Miles Gee, Owen Lester, Noah L. Braunfeld, Luisa M. Rebull, Michael A. Kuhn

Abstract: We present a study of 323 photometrically variable young stellar objects that are likely members of the North America and Pelican (NAP) nebulae star forming region. To do so, we utilize over two years of data in the $g$ and $r$ photometric bands from the Zwicky Transient Facility (ZTF). We first investigate periodic variability, finding 46 objects ($\sim$15\% of the sample) with significant period… ▽ More We present a study of 323 photometrically variable young stellar objects that are likely members of the North America and Pelican (NAP) nebulae star forming region. To do so, we utilize over two years of data in the $g$ and $r$ photometric bands from the Zwicky Transient Facility (ZTF). We first investigate periodic variability, finding 46 objects ($\sim$15\% of the sample) with significant periods that phase well, and can be attributed to stellar rotation. We then use the quasi-periodicity (Q) and flux asymmetry (M) variability metrics to assign morphological classifications to the remaining aperiodic light curves. Another $\sim$39\% of the variable star sample beyond the periodic sources are also flux-symmetric, but with a quasi-periodic (moderate $Q$) or stochastic (high $Q$) nature. Concerning flux-asymmetric sources, our analysis reveals $\sim$14\% bursters (high negative $M$) and $\sim$29\% dippers (high positive $M$). We also investigate the relationship between variability slopes in the $g$ vs $g-r$ color-magnitude diagram, and the light curve morphological classes. Burster-type objects have shallow slopes, while dipper-type variables tend to have higher slopes that are consistent with extinction driven variability. Our work is one of the earliest applications of the $Q$ and $M$ metrics to ground-based data. We therefore contrast the $Q$ values of high-cadence and high-precision space-based data, for which these metrics were designed, with $Q$ determinations resulting from degraded space-based lightcurves that have the cadence and photometric precision characteristic of ground-based data. △ Less

Submitted 17 March, 2022; originally announced March 2022.

Comments: accepted to AJ

X-ray response to disk evolution in two gamma-Cas stars

Authors: Yael Naze, Gregor Rauw, Terrence Bohlsen, Bernard Heathcote, Padric Mc Gee, Paulo Cacella, Christian Motch

Abstract: The Halpha emission of a set of southern gamma-Cas stars was monitored since 2019, with the aim of detecting transition events and examining how their peculiar X-ray emission would react in such cases. Two stars, HD119682 and V767Cen, were found to display slowly decreasing disk emissions. These decreases were not perfectly monotonic and several temporary and limited re-building events were observ… ▽ More The Halpha emission of a set of southern gamma-Cas stars was monitored since 2019, with the aim of detecting transition events and examining how their peculiar X-ray emission would react in such cases. Two stars, HD119682 and V767Cen, were found to display slowly decreasing disk emissions. These decreases were not perfectly monotonic and several temporary and limited re-building events were observed. For HD119682, the emission component in Halpha disappeared in mid-July 2020. In X-rays, the X-ray flux was twice smaller than recorded two decades ago but of a similar level as observed a decade ago. The X-ray flux decreased over the campaign by 30%, but the hardness remained similar in datasets of all epochs. In particular, the gamma-Cas character remained as clear as before even when there was no trace of disk emission in the Halpha line. For V767Cen, the full disappearance of disk emission in Halpha never occurred. We followed closely a disk rebuilding event, but no significant change in flux or hardness was detected. These behaviours are compared to those of other gamma-Cas stars and their consequences on the X-ray generation are discussed. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Comments: accepted by MNRAS

Deformation mechanism of WC single crystals under nanoindentation: Effects of surface defects and orientation on pop-in and hysteresis

Authors: Hannah Zhang, Francois De Luca, Haibin Wang, Ken Mingard, Mark Gee

Abstract: Nanoindentation was carried out on pure tungsten carbide (WC) on the basal (0001) and prismatic (1010) planes, using Berkovich and spherical indenters, in both single load and multi-load testing. The work focuses on correlating the load-displacement curves, including elastic to plastic deformation, size effect and hysteresis with the deformation behaviour of WC. With different specimen preparation… ▽ More Nanoindentation was carried out on pure tungsten carbide (WC) on the basal (0001) and prismatic (1010) planes, using Berkovich and spherical indenters, in both single load and multi-load testing. The work focuses on correlating the load-displacement curves, including elastic to plastic deformation, size effect and hysteresis with the deformation behaviour of WC. With different specimen preparation processes, the elastic to plastic deformation started at different threshold loads: This observation was found to be due to the variation in surface dislocation density. Staircase deformation was observed thought to be caused by dislocation motion and the formation of slip bands; sudden displacement discontinuities in the load-displacement response - associated with dislocation loop nucleation - occurred at, or near the theoretical shear strength. Furthermore, discontinuities in load-displacement curves were also used to confirm that hysteresis loops were a result of plastic deformation, as they when the loading was purely elastic. △ Less

Submitted 7 January, 2022; originally announced January 2022.

Comments: 21 pages, 7 figures

Optimal Path-Planning with Random Breakdowns

Authors: Marissa Gee, Alexander Vladimirsky

Abstract: We propose a model for path-planning based on a single performance metric that accurately accounts for the the potential (spatially inhomogeneous) cost of breakdowns and repairs. These random breakdowns (or system faults) happen at a known, spatially inhomogeneous rate. Our model includes breakdowns of two types: total, which halt all movement until an in-place repair is completed, and partial, af… ▽ More We propose a model for path-planning based on a single performance metric that accurately accounts for the the potential (spatially inhomogeneous) cost of breakdowns and repairs. These random breakdowns (or system faults) happen at a known, spatially inhomogeneous rate. Our model includes breakdowns of two types: total, which halt all movement until an in-place repair is completed, and partial, after which movement continues in a damaged state toward a repair depot. We use the framework of piecewise-deterministic Markov processes to describe the optimal policy for all starting locations. We also introduce an efficient numerical method that uses hybrid value-policy iterations to solve the resulting system of Hamilton-Jacobi-Bellman PDEs. Our method is illustrated through a series of computational experiments that highlight the dependence of optimal policies on the rate and type of breakdowns, with one of them based on Martian terrain data near Jezero Crater. △ Less

Submitted 23 June, 2022; v1 submitted 14 September, 2021; originally announced September 2021.

Comments: 6 pages, 4 figures, published in Control Systems Letters and presented at American Control Conference 2022. Revised to fix typos in equations (19) and (20)

MSC Class: 93C30 (Primary) 49L12; 65N22; 60J28; 93C85 (Secondary)

Micropillar compression of single crystal tungsten carbide, Part 1: temperature and orientation dependence of deformation behaviour

Authors: Helen Jones, Vivian Tong, Rajaprakash Ramachandramoorthy, Ken Mingard, Johann Michler, Mark Gee

Abstract: Tungsten carbide cobalt hardmetals are commonly used as cutting tools subject to high operation temperature and pressures, where the mechanical performance of the tungsten carbide phase affects the wear and lifetime of the material. In this study, the mechanical behaviour of the isolated tungsten carbide (WC) phase was investigated using single crystal micropillar compression. Micropillars in two… ▽ More Tungsten carbide cobalt hardmetals are commonly used as cutting tools subject to high operation temperature and pressures, where the mechanical performance of the tungsten carbide phase affects the wear and lifetime of the material. In this study, the mechanical behaviour of the isolated tungsten carbide (WC) phase was investigated using single crystal micropillar compression. Micropillars in two crystal orientations, 1-5 $μ$m in diameter, were fabricated using focused ion beam (FIB) machining and subsequently compressed between room temperature and 600 °C. The activated plastic deformation mechanisms were strongly anisotropic and weakly temperature dependent. The flow stresses of basal-oriented pillars were about three times higher than the prismatic pillars, and pillars of both orientations soften slightly with increasing temperature. The basal pillars tended to deform by either unstable cracking or unstable yield, whereas the prismatic pillars deformed by slip-mediated cracking. However, the active deformation mechanisms were also sensitive to pillar size and shape. Slip trace analysis of the deformed pillars showed that {10-10} prismatic planes were the dominant slip plane in WC. Basal slip was also activated as a secondary slip system at high temperatures. △ Less

Submitted 28 October, 2021; v1 submitted 12 January, 2021; originally announced January 2021.

Comments: accepted version - International Journal of Refractory Metals and Hard Materials (2021)

COVID-19 Contact-Tracing Mobile Apps: Evaluation and Assessment for Decision Makers

Authors: Ramesh Raskar, Greg Nadeau, John Werner, Rachel Barbar, Ashley Mehra, Gabriel Harp, Markus Leopoldseder, Bryan Wilson, Derrick Flakoll, Praneeth Vepakomma, Deepti Pahwa, Robson Beaudry, Emelin Flores, Maciej Popielarz, Akanksha Bhatia, Andrea Nuzzo, Matt Gee, Jay Summet, Rajeev Surati, Bikram Khastgir, Francesco Maria Benedetti, Kristen Vilcans, Sienna Leis, Khahlil Louisy

Abstract: A number of groups, from governments to non-profits, have quickly acted to innovate the contact-tracing process: they are designing, building, and launching contact-tracing apps in response to the COVID-19 crisis. A diverse range of approaches exist, creating challenging choices for officials looking to implement contact-tracing technology in their community and raising concerns about these choice… ▽ More A number of groups, from governments to non-profits, have quickly acted to innovate the contact-tracing process: they are designing, building, and launching contact-tracing apps in response to the COVID-19 crisis. A diverse range of approaches exist, creating challenging choices for officials looking to implement contact-tracing technology in their community and raising concerns about these choices among citizens asked to participate in contact tracing. We are frequently asked how to evaluate and differentiate between the options for contact-tracing applications. Here, we share the questions we ask about app features and plans when reviewing the many contact-tracing apps appearing on the global stage. △ Less

Submitted 3 June, 2020; originally announced June 2020.

Comments: 32 pages

Algebraic multigrid methods for saddle point systems arising from mortar contact formulations

Authors: Tobias A. Wiesner, Matthias Mayr, Alexander Popp, Michael W. Gee, Wolfgang A. Wall

Abstract: In this paper, a fully aggregation-based algebraic multigrid strategy is developed for nonlinear contact problems of saddle point type using a mortar finite element approach. While the idea of extending multigrid methods to saddle point systems can already be found, e.g., in the context of Stokes and Oseen equations in literature, the main contributions of this work are (i) the development and ope… ▽ More In this paper, a fully aggregation-based algebraic multigrid strategy is developed for nonlinear contact problems of saddle point type using a mortar finite element approach. While the idea of extending multigrid methods to saddle point systems can already be found, e.g., in the context of Stokes and Oseen equations in literature, the main contributions of this work are (i) the development and open-source implementation of an interface aggregation strategy specifically suited for generating Lagrange multiplier aggregates that are required for coupling structural equilibrium equations with contact constraints and (ii) a review of saddle point smoothers in the context of constrained interface problems. The new interface aggregation strategy perfectly fits into an aggregation-based multigrid framework and can easily be combined with segregated transfer operators, which allow to preserve the saddle point structure on the coarse levels. Further analysis provides insight into saddle point smoothers applied to contact problems, while numerical experiments illustrate the robustness of the new method. We have implemented the proposed algorithm within the MueLu package of the open-source Trilinos project. Numerical examples demonstrate the robustness of the proposed method in complex dynamic contact problems as well as its scalability up to 23.9 million unknowns on 480 MPI ranks. △ Less

Submitted 1 April, 2021; v1 submitted 19 December, 2019; originally announced December 2019.

Quantifying Robotic Swarm Coverage

Authors: Brendon G. Anderson, Eva Loeser, Marissa Gee, Fei Ren, Swagata Biswas, Olga Turanova, Matt Haberland, Andrea L. Bertozzi

Abstract: In the field of swarm robotics, the design and implementation of spatial density control laws has received much attention, with less emphasis being placed on performance evaluation. This work fills that gap by introducing an error metric that provides a quantitative measure of coverage for use with any control scheme. The proposed error metric is continuously sensitive to changes in the swarm dist… ▽ More In the field of swarm robotics, the design and implementation of spatial density control laws has received much attention, with less emphasis being placed on performance evaluation. This work fills that gap by introducing an error metric that provides a quantitative measure of coverage for use with any control scheme. The proposed error metric is continuously sensitive to changes in the swarm distribution, unlike commonly used discretization methods. We analyze the theoretical and computational properties of the error metric and propose two benchmarks to which error metric values can be compared. The first uses the realizable extrema of the error metric to compute the relative error of an observed swarm distribution. We also show that the error metric extrema can be used to help choose the swarm size and effective radius of each robot required to achieve a desired level of coverage. The second benchmark compares the observed distribution of error metric values to the probability density function of the error metric when robot positions are randomly sampled from the target distribution. We demonstrate the utility of this benchmark in assessing the performance of stochastic control algorithms. We prove that the error metric obeys a central limit theorem, develop a streamlined method for performing computations, and place the standard statistical tests used here on a firm theoretical footing. We provide rigorous theoretical development, computational methodologies, numerical examples, and MATLAB code for both benchmarks. △ Less

Submitted 18 May, 2019; originally announced May 2019.

Comments: To appear in Springer series Lecture Notes in Electrical Engineering (LNEE). This book contribution is an extension of our ICINCO 2018 conference paper arXiv:1806.02488. 27 pages, 8 figures, 2 tables

A Clinical Approach to Training Effective Data Scientists

Authors: Kit T Rodolfa, Adolfo De Unanue, Matt Gee, Rayid Ghani

Abstract: Like medicine, psychology, or education, data science is fundamentally an applied discipline, with most students who receive advanced degrees in the field going on to work on practical problems. Unlike these disciplines, however, data science education remains heavily focused on theory and methods, and practical coursework typically revolves around cleaned or simplified data sets that have little… ▽ More Like medicine, psychology, or education, data science is fundamentally an applied discipline, with most students who receive advanced degrees in the field going on to work on practical problems. Unlike these disciplines, however, data science education remains heavily focused on theory and methods, and practical coursework typically revolves around cleaned or simplified data sets that have little analog in professional applications. We believe that the environment in which new data scientists are trained should more accurately reflect that in which they will eventually practice and propose here a data science master's degree program that takes inspiration from the residency model used in medicine. Students in the suggested program would spend three years working on a practical problem with an industry, government, or nonprofit partner, supplemented with coursework in data science methods and theory. We also discuss how this program can also be implemented in shorter formats to augment existing professional masters programs in different disciplines. This approach to learning by doing is designed to fill gaps in our current approach to data science education and ensure that students develop the skills they need to practice data science in a professional context and under the many constraints imposed by that context. △ Less

Submitted 14 May, 2019; originally announced May 2019.

Comments: 18 pages, 3 figures, 2 tables

Journal ref: Big Data 7:4, 249-261 (2019)

Quantitative Assessment of Robotic Swarm Coverage

Authors: Brendon G. Anderson, Eva Loeser, Marissa Gee, Fei Ren, Swagata Biswas, Olga Turanova, Matt Haberland, Andrea L. Bertozzi

Abstract: This paper studies a generally applicable, sensitive, and intuitive error metric for the assessment of robotic swarm density controller performance. Inspired by vortex blob numerical methods, it overcomes the shortcomings of a common strategy based on discretization, and unifies other continuous notions of coverage. We present two benchmarks against which to compare the error metric value of a giv… ▽ More This paper studies a generally applicable, sensitive, and intuitive error metric for the assessment of robotic swarm density controller performance. Inspired by vortex blob numerical methods, it overcomes the shortcomings of a common strategy based on discretization, and unifies other continuous notions of coverage. We present two benchmarks against which to compare the error metric value of a given swarm configuration: non-trivial bounds on the error metric, and the probability density function of the error metric when robot positions are sampled at random from the target swarm distribution. We give rigorous results that this probability density function of the error metric obeys a central limit theorem, allowing for more efficient numerical approximation. For both of these benchmarks, we present supporting theory, computation methodology, examples, and MATLAB implementation code. △ Less

Submitted 6 June, 2018; originally announced June 2018.

Comments: Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics (ICINCO), Porto, Portugal, 29--31 July 2018. 11 pages, 4 figures

Journal ref: Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics (ICINCO)---Volume 2, 2018, pp. 91--101

Synthetic Data for Social Good

Authors: Bill Howe, Julia Stoyanovich, Haoyue **, Bernease Herman, Matt Gee

Abstract: Data for good implies unfettered access to data. But data owners must be conservative about how, when, and why they share data or risk violating the trust of the people they aim to help, losing their funding, or breaking the law. Data sharing agreements can help prevent privacy violations, but require a level of specificity that is premature during preliminary discussions, and can take over a year… ▽ More Data for good implies unfettered access to data. But data owners must be conservative about how, when, and why they share data or risk violating the trust of the people they aim to help, losing their funding, or breaking the law. Data sharing agreements can help prevent privacy violations, but require a level of specificity that is premature during preliminary discussions, and can take over a year to establish. We consider the generation and use of synthetic data to facilitate ad hoc collaborations involving sensitive data. A good synthetic dataset has two properties: it is representative of the original data, and it provides strong guarantees about privacy. In this paper, we discuss important use cases for synthetic data that challenge the state of the art in privacy-preserving data generation, and describe DataSynthesizer, a dataset generation tool that takes a sensitive dataset as input and generates a structurally and statistically similar synthetic dataset, with strong privacy guarantees, as output. The data owners need not release their data, while potential collaborators can begin develo** models and methods with some confidence that their results will work similarly on the real dataset. The distinguishing feature of DataSynthesizer is its usability - in most cases, the data owner need not specify any parameters to start generating and sharing data safely and effectively. The code implementing DataSynthesizer is publicly available on GitHub at https://github.com/DataResponsibly. The work on DataSynthesizer is part of the Data, Responsibly project, where the goal is to operationalize responsibility in data sharing, integration, analysis and use. △ Less

Submitted 24 October, 2017; originally announced October 2017.

Comments: Presented at the Data For Good Exchange 2017

A Temporal Consistent Monolithic Approach to Fluid-Structure Interaction Enabling Single Field Predictors

Authors: Matthias Mayr, Thomas Klöppel, Wolfgang A. Wall, Michael W. Gee

Abstract: We present a monolithic approach to large-deformation fluid-structure interaction (FSI) problems that allows for choosing fully implicit, single-step and single-stage time integration schemes in the structure and fluid field independently, and hence is tailored to the needs of the individual field. The independent choice of time integration schemes is achieved by temporal consistent interpolation… ▽ More We present a monolithic approach to large-deformation fluid-structure interaction (FSI) problems that allows for choosing fully implicit, single-step and single-stage time integration schemes in the structure and fluid field independently, and hence is tailored to the needs of the individual field. The independent choice of time integration schemes is achieved by temporal consistent interpolation of the interface traction. To reduce computational costs, we introduce the possibility of field specific predictors in both structure and fluid field. These predictors act on the single fields only. Possible violations of the interface coupling conditions during the predictor step are dealt with within the monolithic solution procedure. We present full detail of such a generalized monolithic solution procedure, which is fully consistent in its non-conforming temporal and spatial discretization. The incorporated mortar approach allows for non-matching spatial discretizations of the fluid and solid domain at the FSI interface and is fully integrated in the resulting monolithic system of equations. The method is applied to a variety of numerical examples. Thereby, temporal convergence rates, the special role of essential boundary conditions at the fluid-structure interface, and the positive effect of predictors are demonstrated and discussed. Emphasis is put on the comparison of different time integration schemes in fluid and structure field, for what the achieved freedom of choice of time integrators is fully exploited. △ Less

Submitted 19 August, 2016; originally announced August 2016.

Journal ref: SIAM J. Sci. Comput. 37 (2015) B30-B59