-
Stabilization of a linear nanomechanical oscillator to its ultimate thermodynamic limit
Authors:
Emanuel Gavartin,
Pierre Verlot,
Tobias J. Kippenberg
Abstract:
The rapid development of micro- and nanooscillators in the past decade has led to the emergence of novel sensors that are opening new frontiers in both applied and fundamental science. The potential of these novel devices is, however, strongly limited by their increased sensitivity to external perturbations. We report a non-invasive optomechanical nano-stabilization technique and apply the method…
▽ More
The rapid development of micro- and nanooscillators in the past decade has led to the emergence of novel sensors that are opening new frontiers in both applied and fundamental science. The potential of these novel devices is, however, strongly limited by their increased sensitivity to external perturbations. We report a non-invasive optomechanical nano-stabilization technique and apply the method to stabilize a linear nanomechanical beam at its ultimate thermodynamic limit at room temperature. The reported ability to stabilize a mechanical oscillator to the thermodynamic limit can be extended to a variety of systems and increases the sensitivity range of nanosensors in both fundamental and applied studies.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
A hybrid on-chip opto-nanomechanical transducer for ultra-sensitive force measurements
Authors:
Emanuel Gavartin,
Pierre Verlot,
Tobias J. Kippenberg
Abstract:
Nanomechanical oscillators have been employed as transducers to measure force, mass and charge with high sensitivity. They are also used in opto- or electromechanical experiments with the goal of quantum control and phenomena of mechanical systems. Here, we report the realization and operation of a hybrid monolithically integrated transducer system consisting of a high-$Q$ nanomechanical oscillato…
▽ More
Nanomechanical oscillators have been employed as transducers to measure force, mass and charge with high sensitivity. They are also used in opto- or electromechanical experiments with the goal of quantum control and phenomena of mechanical systems. Here, we report the realization and operation of a hybrid monolithically integrated transducer system consisting of a high-$Q$ nanomechanical oscillator with modes in the MHz regime coupled to the near-field of a high-$Q$ optical whispering-gallery-mode microresonator. The transducer system enables a sensitive resolution of the nanomechanical beam's thermal motion with a signal-to-noise of five orders of magnitude and has a force sensitivity of $74\,\rm{aN}\,\rm{Hz}^{-1/2}$ at room temperature. We show, both theoretically and experimentally, that the sensitivity of continuous incoherent force detection improves only with the fourth root of the averaging time. Using dissipative feedback based on radiation pressure enabled control, we explicitly demonstrate by detecting a weak incoherent force that this constraint can be significantly relaxed. We achieve a more than 30-fold reduction in averaging time with our hybrid transducer and are able to detect an incoherent force having a force spectral density as small as $15\,\rm{aN}\,\rm{Hz}^{-1/2}$ within $35\,\rm{s}$ of averaging. This corresponds to a signal which is 25 times smaller than the thermal noise and would otherwise remain out of reach. The reported monolithic platform is an enabling step towards hybrid nanomechanical transducers relying on the light-mechanics interface.
△ Less
Submitted 4 December, 2011;
originally announced December 2011.
-
Universal Dynamics of Kerr Frequency Comb Formation in Microresonators
Authors:
T. Herr,
J. Riemensberger,
C. Wang,
K. Hartinger,
E. Gavartin,
R. Holzwarth,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rap…
▽ More
Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rapid progress and the emergence of a wide variety of micro-resonator Kerr-comb platforms, an understanding of the dynamics of the Kerr comb formation is still lacking. In particular the question in which regime low phase noise performance can be achieved has so far not been answered but is of critical importance for future application of this technology. Here an universal, platform independent understanding of the Kerr-comb formation dynamics based on experimental observations in crystalline MgF2 and planar Si3N4 comb generators is given. This explains a wide range of hereto not understood phenomena and reveals for the first time the underlying condition for low phase noise performance.
△ Less
Submitted 13 November, 2011;
originally announced November 2011.
-
Optomechanical coupling in a two-dimensional photonic crystal defect cavity
Authors:
Emanuel Gavartin,
Remy Braive,
Isabelle Sagnes,
Olivier Arcizet,
Alexios Beveratos,
Tobias J. Kippenberg,
Isabelle Robert-Philip
Abstract:
Periodically structured materials can sustain both optical and mechanical modes. Here we investigate and observe experimentally the optomechanical properties of a conventional two-dimensional suspended photonic crystal defect cavity with a mode volume of $\sim$$3(λ/n)^{3}$. Two families of mechanical modes are observed: flexural modes, associated to the motion of the whole suspended membrane, and…
▽ More
Periodically structured materials can sustain both optical and mechanical modes. Here we investigate and observe experimentally the optomechanical properties of a conventional two-dimensional suspended photonic crystal defect cavity with a mode volume of $\sim$$3(λ/n)^{3}$. Two families of mechanical modes are observed: flexural modes, associated to the motion of the whole suspended membrane, and localized modes with frequencies in the GHz regime corresponding to localized phonons in the optical defect cavity of diffraction-limited size. We demonstrate direct measurements of the optomechanical vacuum coupling rate using a frequency calibration technique. The highest measured values exceed 250 kHz, demonstrating strong coupling of optical and mechanical modes in such structures.
△ Less
Submitted 29 November, 2010;
originally announced November 2010.
-
Optomechanical sideband cooling of a micromechanical oscillator close to the quantum ground state
Authors:
Remi Riviere,
Samuel Deleglise,
Stefan Weis,
Emanuel Gavartin,
Olivier Arcizet,
Albert Schliesser,
Tobias J. Kippenberg
Abstract:
Cooling a mesoscopic mechanical oscillator to its quantum ground state is elementary for the preparation and control of low entropy quantum states of large scale objects. Here, we pre-cool a 70-MHz micromechanical silica oscillator to an occupancy below 200 quanta by thermalizing it with a 600-mK cold 3He gas. Two-level system induced dam** via structural defect states is shown to be strongly re…
▽ More
Cooling a mesoscopic mechanical oscillator to its quantum ground state is elementary for the preparation and control of low entropy quantum states of large scale objects. Here, we pre-cool a 70-MHz micromechanical silica oscillator to an occupancy below 200 quanta by thermalizing it with a 600-mK cold 3He gas. Two-level system induced dam** via structural defect states is shown to be strongly reduced, and simultaneously serves as novel thermometry method to independently quantify excess heating due to the cooling laser. We demonstrate that dynamical backaction sideband cooling can reduce the average occupancy to 9+-1 quanta, implying that the mechanical oscillator can be found (10+- 1)% of the time in its quantum ground state.
△ Less
Submitted 1 November, 2010;
originally announced November 2010.
-
Optomechanically induced transparency
Authors:
S. Weis,
R. Riviere,
S. Deleglise,
E. Gavartin,
O. Arcizet,
A. Schliesser,
T. J. Kippenberg
Abstract:
Coherent interaction of laser radiation with multilevel atoms and molecules can lead to quantum interference in the electronic excitation pathways. A prominent example observed in atomic three-level-systems is the phenomenon of electromagnetically induced transparency (EIT), in which a control laser induces a narrow spectral transparency window for a weak probe laser beam. The concomitant rapid va…
▽ More
Coherent interaction of laser radiation with multilevel atoms and molecules can lead to quantum interference in the electronic excitation pathways. A prominent example observed in atomic three-level-systems is the phenomenon of electromagnetically induced transparency (EIT), in which a control laser induces a narrow spectral transparency window for a weak probe laser beam. The concomitant rapid variation of the refractive index in this spectral window can give rise to dramatic reduction of the group velocity of a propagating pulse of probe light. Dynamic control of EIT via the control laser enables even a complete stop, that is, storage, of probe light pulses in the atomic medium. Here, we demonstrate optomechanically induced transparency (OMIT)--formally equivalent to EIT--in a cavity optomechanical system operating in the resolved sideband regime. A control laser tuned to the lower motional sideband of the cavity resonance induces a dipole-like interaction of optical and mechanical degrees of freedom. Under these conditions, the destructive interference of excitation pathways for an intracavity probe field gives rise to a window of transparency when a two-photon resonance condition is met. As a salient feature of EIT, the power of the control laser determines the width and depth of the probe transparency window. OMIT could therefore provide a new approach for delaying, slowing and storing light pulses in long-lived mechanical excitations of optomechanical systems, whose optical and mechanical properties can be tailored in almost arbitrary ways in the micro- and nano-optomechanical platforms developed to date.
△ Less
Submitted 4 July, 2010;
originally announced July 2010.
-
Measuring nanomechanical motion with an imprecision far below the standard quantum limit
Authors:
G. Anetsberger,
E. Gavartin,
O. Arcizet,
Q. P. Unterreithmeier,
E. M. Weig,
M. L. Gorodetsky,
J. P. Kotthaus,
T. J. Kippenberg
Abstract:
We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute un…
▽ More
We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute units) and is known to reduce to negligible values for moderate cryogenic temperatures. The transducer operates deeply in the quantum backaction dominated regime, prerequisite for exploring quantum backaction, measurement-induced squeezing and accessing sub-SQL sensitivity using backaction evading techniques.
△ Less
Submitted 19 March, 2010;
originally announced March 2010.
-
Octave Spanning Frequency Comb on a Chip
Authors:
P. Del'Haye,
T. Herr,
E. Gavartin,
R. Holzwarth,
T. J. Kippenberg
Abstract:
Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to the…
▽ More
Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to their future use as 'frequency markers', is however the absolute frequency stabilization of the optical comb spectrum. A powerful technique for this stabilization is self-referencing, which requires a spectrum that spans a full octave, i.e. a factor of two in frequency. In the case of mode locked lasers, overcoming the limited bandwidth has become possible only with the advent of photonic crystal fibres for supercontinuum generation. Here, we report for the first time the generation of an octave-spanning frequency comb directly from a toroidal microresonator on a silicon chip. The comb spectrum covers the wavelength range from 990 nm to 2170 nm and is retrieved from a continuous wave laser interacting with the modes of an ultra high Q microresonator, without relying on external broadening. Full tunability of the generated frequency comb over a bandwidth exceeding an entire free spectral range is demonstrated. This allows positioning of a frequency comb mode to any desired frequency within the comb bandwidth. The ability to derive octave spanning spectra from microresonator comb generators represents a key step towards achieving a radio-frequency to optical link on a chip, which could unify the fields of metrology with micro- and nano-photonics and enable entirely new devices that bring frequency metrology into a chip scale setting for compact applications such as space based optical clocks.
△ Less
Submitted 24 December, 2009;
originally announced December 2009.
