-
A Comprehensive Characterization of the Neutron Fields Produced by the Apollon Petawatt Laser
Authors:
Ronan Lelièvre,
Weipeng Yao,
Tessa Waltenspiel,
Itamar Cohen,
Arie Beck,
Erez Cohen,
David Michaeli,
Ishay Pomerantz,
Donald Cort Gautier,
François Trompier,
Quentin Ducasse,
Pavlos Koseoglou,
Pär-Anders Söderström,
François Mathieu,
Amokrane Allaoua,
Julien Fuchs
Abstract:
Since two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2).…
▽ More
Since two decades, laser-driven neutron emissions are studied as they represent a complementary source to conventional neutron sources, with further more different characteristics (i.e. shorter bunch duration and higher number of neutrons per bunch). We report here a global, thorough characterization of the neutron fields produced at the Apollon laser facility using the secondary laser beam (F2). A Double Plasma Mirror (DPM) was used to improve the temporal contrast of the laser which delivers pulses of 24 fs duration, a mean on-target energy of ~10 J and up to 1 shot/min. The interaction of the laser with thin targets (few tens or hundreds of nm) in ultra-high conditions produced enhanced proton beams (up to 35 MeV), which were then used to generate neutrons via the pitcher-catcher technique. The characterization of these neutron emissions is presented, with results obtained from both simulations and measurements using several diagnostics (activation samples, bubble detectors and Time-of-Flight detectors), leading to a neutron yield of ~$4.10^{7}$ neutrons/shot. Similar neutron emissions were observed during shots with and without DPM, while fewer X-rays are produced when the DPM is used, making this tool interesting to adjust the neutrons/X-rays ratio for some applications like combined neutron/X-ray radiography.
△ Less
Submitted 11 December, 2023; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Measurement of BAS-TR imaging plate response to energetic aluminum ions
Authors:
J. Won,
J. Song,
S. Palaniyappan,
D. C. Gautier,
W. Jeong,
J. C. Fernández,
W. Bang
Abstract:
We measured the response of BAS-TR imaging plate (IP) to energetic aluminum ions in the 0 to 222 MeV energy range, and compared it with predictions from a Monte Carlo simulation code using two different IP models. Energetic aluminum ions were produced with an intense laser pulse, and the response was evaluated from cross-calibration between CR-39 track detector and IP energy spectrometer. For the…
▽ More
We measured the response of BAS-TR imaging plate (IP) to energetic aluminum ions in the 0 to 222 MeV energy range, and compared it with predictions from a Monte Carlo simulation code using two different IP models. Energetic aluminum ions were produced with an intense laser pulse, and the response was evaluated from cross-calibration between CR-39 track detector and IP energy spectrometer. For the first time, we obtained the response function of the BAS-TR IP for aluminum ions in the energy range from 0 to 222 MeV. Notably the IP sensitivity in the exponential model is nearly constant from 36 MeV to 160 MeV.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Experimental observation of $β$-delayed neutrons from $^{9}$Li as a way to study short-pulse laser-driven deuteron production
Authors:
Andrea Favalli,
Nevzat Guler,
Daniela Henzlova,
Katerina Falk,
Stephen Croft,
Donald C. Gautier,
Kiril D. Ianakiev,
Metodi Iliev,
Sasikumar Palaniyappan,
Markus Roth,
Juan C. Fernandez,
Martyn T. Swinhoe
Abstract:
A short-pulse laser-driven deuteron beam is generated in the relativistic transparency regime and aimed at a beryllium converter to generate neutrons at the TRIDENT laser facility. These prompt neutrons have been used for active interrogation to detect nuclear materials, the first such demonstration of a laser-driven neutron source. During the experiments, delayed neutrons from $^9$Li decay was ob…
▽ More
A short-pulse laser-driven deuteron beam is generated in the relativistic transparency regime and aimed at a beryllium converter to generate neutrons at the TRIDENT laser facility. These prompt neutrons have been used for active interrogation to detect nuclear materials, the first such demonstration of a laser-driven neutron source. During the experiments, delayed neutrons from $^9$Li decay was observed. It was identified by its characteristic half-life of 178.3 ms. Production is attributed to the nuclear reactions $^9$Be(d,2p)$^9$Li and $^9$Be(n,p)$^9$Li inside the beryllium converter itself. These reactions have energy thresholds of 18.42 and 14.26 MeV respectively, and we estimate the (d,2p) reaction to be the dominant source of $^9$Li production. Therefore, only the higher-energy portion of the deuteron spectrum contributes to the production of the delayed neutrons. It was observed that the delayed-neutron yield decreases with increasing distance between the converter and the deuteron source. This behavior is consistent with deuteron production with energy greater than $\sim$20 MeV within a cone with a half-angle greater than 40$^{\circ}$. Prompt-neutron time-of-flight measurements at varying separation between the converter and the laser target indicate that the fast deuteron population above threshold is severely depleted on axis out to $\sim$20$^{\circ}$. These measurements are consistent with emission of the fast deuterons (i.e., above 10 MeV/nucleon) in a ring-like fashion around the central axis. Such an inferred ring-like structure is qualitatively consistent with a documented signature of the breakout afterburner (BOA) laser-plasma ion acceleration mechanism. The measurement of $β$-delayed neutrons from $^9$Li decay could provide an important new diagnostic tool for the study of the features of the deuteron production mechanism in a non-intrusive way.
△ Less
Submitted 18 May, 2016;
originally announced May 2016.
-
The Hera Saturn Entry Probe Mission
Authors:
O. Mousis,
D. H. Atkinson,
T. Spilker,
E. Venkatapathy,
J. Poncy,
R. Frampton,
A. Coustenis,
K. Reh,
J. -P. Lebreton,
L. N. Fletcher,
R. Hueso,
M. J. Amato,
A. Colaprete,
F. Ferri,
D. Stam,
P. Wurz,
S. Atreya,
S. Aslam,
D. J. Banfield,
S. Calcutt,
G. Fischer,
A. Holland,
C. Keller,
E. Kessler,
M. Leese
, et al. (19 additional authors not shown)
Abstract:
The Hera Saturn entry probe mission is proposed as an M--class mission led by ESA with a contribution from NASA. It consists of one atmospheric probe to be sent into the atmosphere of Saturn, and a Carrier-Relay spacecraft. In this concept, the Hera probe is composed of ESA and NASA elements, and the Carrier-Relay Spacecraft is delivered by ESA. The probe is powered by batteries, and the Carrier-R…
▽ More
The Hera Saturn entry probe mission is proposed as an M--class mission led by ESA with a contribution from NASA. It consists of one atmospheric probe to be sent into the atmosphere of Saturn, and a Carrier-Relay spacecraft. In this concept, the Hera probe is composed of ESA and NASA elements, and the Carrier-Relay Spacecraft is delivered by ESA. The probe is powered by batteries, and the Carrier-Relay Spacecraft is powered by solar panels and batteries. We anticipate two major subsystems to be supplied by the United States, either by direct procurement by ESA or by contribution from NASA: the solar electric power system (including solar arrays and the power management and distribution system), and the probe entry system (including the thermal protection shield and aeroshell). Hera is designed to perform in situ measurements of the chemical and isotopic compositions as well as the dynamics of Saturn's atmosphere using a single probe, with the goal of improving our understanding of the origin, formation, and evolution of Saturn, the giant planets and their satellite systems, with extrapolation to extrasolar planets. Hera's aim is to probe well into the cloud-forming region of the troposphere, below the region accessible to remote sensing, to the locations where certain cosmogenically abundant species are expected to be well mixed. By leading to an improved understanding of the processes by which giant planets formed, including the composition and properties of the local solar nebula at the time and location of giant planet formation, Hera will extend the legacy of the Galileo and Cassini missions by further addressing the creation, formation, and chemical, dynamical, and thermal evolution of the giant planets, the entire solar system including Earth and the other terrestrial planets, and formation of other planetary systems.
△ Less
Submitted 26 October, 2015;
originally announced October 2015.
-
Efficient quasi-monoenergetic ion beams up to 18 MeV/nucleon via self-generated plasma fields in relativistic laser plasmas
Authors:
Sasi Palaniyappan,
Chengkun Huang,
Donald C. Gautier,
Christopher E. Hamilton,
Miguel A. Santiago,
Christian Kreuzer,
Rahul C. Shah,
Juan C. Fernandez
Abstract:
Table-top laser-plasma ion accelerators seldom achieve narrow energy spreads, and never without serious compromises in efficiency, particle yield, etc. Using massive computer simulations, we identify a self-organizing scheme that exploits persisting self-generated plasma electric (~TV/m) and magnetic (~10${}^{4}$ Tesla) fields to reduce the ion energy spread after the laser exits the plasma - sepa…
▽ More
Table-top laser-plasma ion accelerators seldom achieve narrow energy spreads, and never without serious compromises in efficiency, particle yield, etc. Using massive computer simulations, we identify a self-organizing scheme that exploits persisting self-generated plasma electric (~TV/m) and magnetic (~10${}^{4}$ Tesla) fields to reduce the ion energy spread after the laser exits the plasma - separating the ion acceleration from the energy spread reduction. Consistent with the scheme, we experimentally demonstrate aluminum and carbon ion beams with narrow spectral peaks at energies up to 310 MeV (11.5 MeV/nucleon) and 220 MeV (18.3 MeV/nucleon), respectively, with high conversion efficiency (~5%, i.e., 4J out of 80J laser). This is achieved with 0.12 PW high-contrast Gaussian laser pulses irradiating planar foils with optimal thicknesses of up to 250 nm that scale with laser intensity. When increasing the focused laser intensity fourfold (by reducing the focusing optic f/number twofold), the spectral-peak energy increases twofold. These results pave the way for next generation compact accelerators suitable for applications. For example, 400 MeV (33.3 MeV/nucleon) carbon-ion beam with narrow energy spread required for ion fast ignition could be generated using PW-class lasers.
△ Less
Submitted 24 June, 2015;
originally announced June 2015.
-
New insights on Saturn's formation from its nitrogen isotopic composition
Authors:
Olivier Mousis,
Jonathan I. Lunine,
Leigh N. Fletcher,
Kathleen E. Mandt,
Mohamad Ali-Dib,
Daniel Gautier,
Sushil Atreya
Abstract:
The recent derivation of a lower limit for the $^{14}$N/$^{15}$N ratio in Saturn's ammonia, which is found to be consistent with the Jovian value, prompted us to revise models of Saturn's formation using as constraints the supersolar abundances of heavy elements measured in its atmosphere. Here we find that it is possible to account for both Saturn's chemical and isotopic compositions if one assum…
▽ More
The recent derivation of a lower limit for the $^{14}$N/$^{15}$N ratio in Saturn's ammonia, which is found to be consistent with the Jovian value, prompted us to revise models of Saturn's formation using as constraints the supersolar abundances of heavy elements measured in its atmosphere. Here we find that it is possible to account for both Saturn's chemical and isotopic compositions if one assumes the formation of its building blocks at $\sim$45 K in the protosolar nebula, provided that the O abundance was $\sim$2.6 times protosolar in its feeding zone. To do so, we used a statistical thermodynamic model to investigate the composition of the clathrate phase that formed during the cooling of the protosolar nebula and from which the building blocks of Saturn were agglomerated. We find that Saturn's O/H is at least $\sim$34.9 times protosolar and that the corresponding mass of heavy elements ($\sim$43.1 \Mearth) is within the range predicted by semi-convective interior models.
△ Less
Submitted 20 October, 2014;
originally announced October 2014.
-
Scaling of laser-driven ion energies in the relativistic transparent regime
Authors:
D. Jung,
L. Yin,
B. J. Albright,
D. C. Gautier,
B. Dromey,
R. Shah,
S. Palaniyappan,
S. Letzring,
H. -C. Wu,
T. Shimada,
R. P. Johnson,
D. Habs,
M. Roth,
J. C. Fernandez,
B. M. Hegelich
Abstract:
Laser-driven ions have compelling properties and their potential use for medical applications has attracted a huge global interest. One of the major challenges of these applications is generating beams of the required energies. To date, there has been no systematic study of the effect of laser intensity on the generation of laser-driven ions from ultrathin foils during relativistic transparency. H…
▽ More
Laser-driven ions have compelling properties and their potential use for medical applications has attracted a huge global interest. One of the major challenges of these applications is generating beams of the required energies. To date, there has been no systematic study of the effect of laser intensity on the generation of laser-driven ions from ultrathin foils during relativistic transparency. Here we present a scaling for ion energies with respect to the on-target laser intensity and in considering target thickness we find an optimum thickness closely related to the experimentally observed relativistic transparency. A steep linear scaling with the normalized laser amplitude a0 has been measured and verified with PIC simulations. In contrast to TNSA, this scaling is much steeper and has been measured for ions with Z > 1. Following our results, ion energies exceeding 100MeV/amu are already accessible with currently available laser systems enabling realization of numerous advanced applications
△ Less
Submitted 3 June, 2014;
originally announced June 2014.
-
Giant Planets
Authors:
Tristan Guillot,
Daniel Gautier
Abstract:
We review the interior structure and evolution of Jupiter, Saturn, Uranus and Neptune, and giant exoplanets with particular emphasis on constraining their global composition. Compared to the first edition of this review, we provide a new discussion of the atmospheric compositions of the solar system giant planets, we discuss the discovery of oscillations of Jupiter and Saturn, the significant impr…
▽ More
We review the interior structure and evolution of Jupiter, Saturn, Uranus and Neptune, and giant exoplanets with particular emphasis on constraining their global composition. Compared to the first edition of this review, we provide a new discussion of the atmospheric compositions of the solar system giant planets, we discuss the discovery of oscillations of Jupiter and Saturn, the significant improvements in our understanding of the behavior of material at high pressures and the consequences for interior and evolution models. We place the giant planets in our Solar System in context with the trends seen for exoplanets.
△ Less
Submitted 20 January, 2015; v1 submitted 15 May, 2014;
originally announced May 2014.
-
Scientific rationale of Saturn's in situ exploration
Authors:
O. Mousis,
L. N. Fletcher,
J. -P. Lebreton,
P. Wurz,
T. Cavalié,
A. Coustenis,
R. Courtin,
D. Gautier,
R. Helled,
P. G. J. Irwin,
A. D. Morse,
N. Nettelmann,
B. Marty,
P. Rousselot,
O. Venot,
D. H. Atkinson,
J. H. Waite,
K. R. Reh,
A. Simon-Miller,
S. Atreya,
N. André,
M. Blanc,
I. A. Daglis,
G. Fischer,
W. D. Geppert
, et al. (25 additional authors not shown)
Abstract:
Remote sensing observations meet some limitations when used to study the bulk atmospheric composition of the giant planets of our solar system. A remarkable example of the superiority of in situ probe measurements is illustrated by the exploration of Jupiter, where key measurements such as the determination of the noble gases abundances and the precise measurement of the helium mixing ratio have o…
▽ More
Remote sensing observations meet some limitations when used to study the bulk atmospheric composition of the giant planets of our solar system. A remarkable example of the superiority of in situ probe measurements is illustrated by the exploration of Jupiter, where key measurements such as the determination of the noble gases abundances and the precise measurement of the helium mixing ratio have only been made available through in situ measurements by the Galileo probe. This paper describes the main scientific goals to be addressed by the future in situ exploration of Saturn placing the Galileo probe exploration of Jupiter in a broader context and before the future probe exploration of the more remote ice giants. In situ exploration of Saturn's atmosphere addresses two broad themes that are discussed throughout this paper: first, the formation history of our solar system and second, the processes at play in planetary atmospheres. In this context, we detail the reasons why measurements of Saturn's bulk elemental and isotopic composition would place important constraints on the volatile reservoirs in the protosolar nebula. We also show that the in situ measurement of CO (or any other disequilibrium species that is depleted by reaction with water) in Saturn's upper troposphere would constrain its bulk O/H ratio. We highlight the key measurements required to distinguish competing theories to shed light on giant planet formation as a common process in planetary systems with potential applications to most extrasolar systems. In situ measurements of Saturn's stratospheric and tropospheric dynamics, chemistry and cloud-forming processes will provide access to phenomena unreachable to remote sensing studies. Different mission architectures are envisaged, which would benefit from strong international collaborations.
△ Less
Submitted 18 April, 2014;
originally announced April 2014.
-
160 MeV laser-accelerated protons from CH2 nano-targets for proton cancer therapy
Authors:
B. M. Hegelich,
D. Jung,
B. J. Albright,
M. Cheung,
B. Dromey,
D. C. Gautier,
C. Hamilton,
S. Letzring,
R. Munchhausen,
S. Palaniyappan,
R. Shah,
H. -C. Wu,
L. Yin,
J. C. Fernández
Abstract:
Proton (and ion) cancer therapy has proven to be an extremely effective even supe-rior method of treatment for some tumors 1-4. A major problem, however, lies in the cost of the particle accelerator facilities; high procurement costs severely limit the availability of ion radiation therapy, with only ~26 centers worldwide. Moreover, high operating costs often prevent economic operation without sta…
▽ More
Proton (and ion) cancer therapy has proven to be an extremely effective even supe-rior method of treatment for some tumors 1-4. A major problem, however, lies in the cost of the particle accelerator facilities; high procurement costs severely limit the availability of ion radiation therapy, with only ~26 centers worldwide. Moreover, high operating costs often prevent economic operation without state subsidies and have led to a shutdown of existing facilities 5,6. Laser-accelerated proton and ion beams have long been thought of as a way out of this dilemma, with the potential to provide the required ion beams at lower cost and smaller facility footprint 7-14. The biggest challenge has been the achievement of sufficient particle energy for therapy, in the 150-250 MeV range for protons 15,16. For the last decade, the maximum exper-imentally observed energy of laser-accelerated protons has remained at ~60 MeV 17. Here we the experimental demonstration of laser-accelerated protons to energies exceeding 150 MeV, reaching the therapy window. This was achieved through a dif-ferent acceleration regime rather than a larger laser, specifically a 150 TW laser with CH2 nano-targets in the relativistically transparent regime 18,19. We also demonstrate a clear scaling law with laser intensity based on analytical theory, computer simulations and experimental validation that will enable design of a pro-totype system spanning the full range of therapeutically desirable energies.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Single-Shot 60 dB Dynamic Range Laser Contrast Measurement Using Self-Referencing Spectral Interferometry
Authors:
Sasi Palaniyappan,
R. P. Johnson,
T. Shimada,
R. C. Shah,
D. Jung,
D. C. Gautier,
B. M. Hegelich,
J. C. Fernandez
Abstract:
High dynamic range contrast measurement of laser pulses is typically obtained by cross-correlating the laser pulse with a self-generated reference laser pulse directly in the temporal domain. Alternatively, it is also possible to measure the spectral interferogram of the laser pulse with the references pulse in the spectral domain, from which the high dynamic range contrast measurement can be extr…
▽ More
High dynamic range contrast measurement of laser pulses is typically obtained by cross-correlating the laser pulse with a self-generated reference laser pulse directly in the temporal domain. Alternatively, it is also possible to measure the spectral interferogram of the laser pulse with the references pulse in the spectral domain, from which the high dynamic range contrast measurement can be extracted using inverse Fourier-transformation. Here, we demonstrate single-shot 60 dB dynamic range laser contrast measurement by inverse Fourier-transforming the measured spectral interferogram into temporal domain. The result directly provides the cross-correlation of the laser pulse with the reference pulse provided there is enough time-delay imposed between the laser and reference pulses. Then method is cross-calibrated by measuring known pre-pulses along with scanning third-order auto-correlator measurements.
△ Less
Submitted 7 August, 2014; v1 submitted 20 August, 2012;
originally announced August 2012.
-
EJSM Origins White Document
Authors:
A. Coradini,
D. Gautier,
T. Guillot,
G. Schubert,
B. Moore,
D. Turrini,
H. J. Waite
Abstract:
Recommendations by the Origins Working Group for EJSM mission - JGO and JEO spacecrafts.
Recommendations by the Origins Working Group for EJSM mission - JGO and JEO spacecrafts.
△ Less
Submitted 6 May, 2010;
originally announced May 2010.
-
Giant Planets
Authors:
Tristan Guillot,
Daniel Gautier
Abstract:
We review the interior structure and evolution of Jupiter, Saturn, Uranus and Neptune, and extrasolar giant planets with particular emphasis on constraining their global composition.
We review the interior structure and evolution of Jupiter, Saturn, Uranus and Neptune, and extrasolar giant planets with particular emphasis on constraining their global composition.
△ Less
Submitted 10 December, 2009;
originally announced December 2009.
-
Status of Superconducting RF Linac Development for APT
Authors:
K. C. D. Chan,
B. M. Campbell,
D. C. Gautier,
R. C. Gentzlinger,
J. G. Gioia,
W. B. Haynes,
D. J. Katonak,
J. P. Kelley,
F. L. Krawczyk,
M. A. Madrid,
R. R. Mitchell,
D. I. Montoya,
E. N. Schmierer,
D. L. Schrage,
A. H. Shapiro,
T. Tajima,
J. A. Waynert,
J. Mammosser,
J. Kuzminski
Abstract:
This paper describes the development progress of high current superconducting RF linacs in Los Alamos, performed to support a design of the linac for the APT (Accelerator Production of Tritium) Project. The APT linac design includes a CW superconducting RF high energy section, spanning an energy range of 211 to 1030 MeV, and operating at a frequency of 700 MHz with two constant beta sections (be…
▽ More
This paper describes the development progress of high current superconducting RF linacs in Los Alamos, performed to support a design of the linac for the APT (Accelerator Production of Tritium) Project. The APT linac design includes a CW superconducting RF high energy section, spanning an energy range of 211 to 1030 MeV, and operating at a frequency of 700 MHz with two constant beta sections (beta of 0.64 and 0.82). In the last two years, we have progressed towards build a cryomodule with beta of 0.64. We completed the designs of the 5 cell superconducting cavities and the 210 kW power couplers. We are scheduled to begin assembly of the cryomodule in September 2000. In this paper, we present an overview of the status of our development efforts and a report on the results of the cavity and coupler test program.
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
-
High-Power Testing of the APT Power Coupler
Authors:
E. N. Schmierer,
K. C. D. Chan,
D. C. Gautier,
J. G. Gioia,
W. B. Haynes,
F. L. Krawczyk,
M. A. Madrid,
D. L. Schrage,
J. A. Waynert,
B. Rusnak
Abstract:
For the baseline APT (Accelerator Production of Tritium) linac design, power couplers are required to transmit 210-kW of CW RF power to the superconducting cavities. These APT couplers operate at 700 MHz, have a coaxial design and an adjustable coupling to the superconducting cavities. Since May 1999, we have been testing couplers of this design on a room-temperature test stand. We completed tes…
▽ More
For the baseline APT (Accelerator Production of Tritium) linac design, power couplers are required to transmit 210-kW of CW RF power to the superconducting cavities. These APT couplers operate at 700 MHz, have a coaxial design and an adjustable coupling to the superconducting cavities. Since May 1999, we have been testing couplers of this design on a room-temperature test stand. We completed tests at transmitted-power and reflected-power conditions up to 1 MW. We also tested the couplers with a portion of the outer conductor cooled by liquid nitrogen. Under this latter condition, we studied the effects of condensed gases on coupler performance. The results of these tests indicate that the APT couplers are capable of delivering more than 500 kW to the cavities. We are in the process of increasing the baseline coupler design requirement to 420 kW of transmitted power to take advantage of this successful development. In this paper, we describe the results of our high-power coupler tests.
△ Less
Submitted 15 August, 2000;
originally announced August 2000.
-
New Constraints on the Composition of Jupiter from Galileo Measurements and Interior Models
Authors:
Tristan Guillot,
Daniel Gautier,
William B. Hubbard
Abstract:
Using the helium abundance measured by Galileo in the atmosphere of Jupiter and interior models reproducing the observed external gravitational field, we derive new constraints on the composition and structure of the planet. We conclude that, except for helium which must be more abundant in the metallic interior than in the molecular envelope, Jupiter could be homogeneous (no core) or could have…
▽ More
Using the helium abundance measured by Galileo in the atmosphere of Jupiter and interior models reproducing the observed external gravitational field, we derive new constraints on the composition and structure of the planet. We conclude that, except for helium which must be more abundant in the metallic interior than in the molecular envelope, Jupiter could be homogeneous (no core) or could have a central dense core up to 12 Earth masses. The mass fraction of heavy elements is less than 7.5 times the solar value in the metallic envelope and between 1 and 7.2 times solar in the molecular envelope. The total amount of elements other than hydrogen and helium in the planet is between 11 and 45 Earth masses.
△ Less
Submitted 17 July, 1997;
originally announced July 1997.
-
A Reestimate of the Protosolar 2H/1H ratio from 3He/4He solar wind measurements
Authors:
D. Gautier,
P. Morel
Abstract:
We reanalyze the inference of the protosolar abundance of deuterium made by Geiss (1993) from measurements of 3He/4He in the solar wind. We use an evolutionary solar model with microscopic diffusion, constrained to fit the present age, radius and luminosity, as well as the observed ratio of heavy elements to hydrogen. The protosolar 2H/1H is obtained from the best fit of 3He/4He in the solar win…
▽ More
We reanalyze the inference of the protosolar abundance of deuterium made by Geiss (1993) from measurements of 3He/4He in the solar wind. We use an evolutionary solar model with microscopic diffusion, constrained to fit the present age, radius and luminosity, as well as the observed ratio of heavy elements to hydrogen. The protosolar 2H/1H is obtained from the best fit of 3He/4He in the solar wind. Taking for the protosolar 3He/4He the value measured in Jupiter by the Galileo probe (Niemann et al. 1996), we derive the protosolar 2H/1H=(3.01 +- 0.17) 10^{-5} ratio. Compared to the present interstellar medium value (Linsky et al. 1993), this result is compatible with models of the chemical evolution of the Galaxy in the solar neighborhood; it is also marginally compatible with the Jovian 2H/1H=(5 +- 2) 10^{-5} ratio measured by Galileo.
△ Less
Submitted 9 April, 1997;
originally announced April 1997.
-
Interferometry with Faraday mirrors for quantum cryptography
Authors:
H. Zbinden,
J. D. Gautier,
N. Gisin,
B. Huttner,
A. Muller,
W. Tittel
Abstract:
Quantum Cryptography over 23km of installed Telecom fiber using a novel interferometer with Faraday mirrors is presented. The interferometer needs no alignment nor polarization control and features 99.8% fringe visibility. A secret key of 20kbit length with a error rate of 1.35% for 0.1 photon per pulse was produced.
Quantum Cryptography over 23km of installed Telecom fiber using a novel interferometer with Faraday mirrors is presented. The interferometer needs no alignment nor polarization control and features 99.8% fringe visibility. A secret key of 20kbit length with a error rate of 1.35% for 0.1 photon per pulse was produced.
△ Less
Submitted 14 March, 1997;
originally announced March 1997.
