Showing 1–50 of 85 results for author: Gatti, F

Two Nitsche-based mixed finite element discretizations for the seepage problem in Richards' equation

Authors: Federico Gatti, Andrea Bressan, Alessio Fumagalli, Domenico Gallipoli, Leonardo Maria Lalicata, Simone Pittaluga, Lorenzo Tamellini

Abstract: This paper proposes two algorithms to impose seepage boundary conditions in the context of Richards' equation for groundwater flows in unsaturated media. Seepage conditions are non-linear boundary conditions, that can be formulated as a set of unilateral constraints on both the pressure head and the water flux at the ground surface, together with a complementarity condition: these conditions in pr… ▽ More This paper proposes two algorithms to impose seepage boundary conditions in the context of Richards' equation for groundwater flows in unsaturated media. Seepage conditions are non-linear boundary conditions, that can be formulated as a set of unilateral constraints on both the pressure head and the water flux at the ground surface, together with a complementarity condition: these conditions in practice require switching between Neumann and Dirichlet boundary conditions on unknown portions on the boundary. Upon realizing the similarities of these conditions with unilateral contact problems in mechanics, we take inspiration from that literature to propose two approaches: the first method relies on a strongly consistent penalization term, whereas the second one is obtained by an hybridization approach, in which the value of the pressure on the surface is treated as a separate set of unknowns. The flow problem is discretized in mixed form with div-conforming elements so that the water mass is preserved. Numerical experiments show the validity of the proposed strategy in handling the seepage boundary conditions on geometries with increasing complexity. △ Less

Submitted 10 July, 2024; originally announced July 2024.

DarkSide-20k sensitivity to light dark matter particles

Authors: DarkSide-20k Collaboration, :, F. Acerbi, P. Adhikari, P. Agnes, I. Ahmad, S. Albergo, I. F. M. Albuquerque, T. Alexander, A. K. Alton, P. Amaudruz, M. Angiolilli, E. Aprile, R. Ardito, M. Atzori Corona, D. J. Auty, M. Ave, I. C. Avetisov, O. Azzolini, H. O. Back, Z. Balmforth, A. Barrado Olmedo, P. Barrillon, G. Batignani, P. Bhowmick , et al. (289 additional authors not shown)

Abstract: The dual-phase liquid argon time projection chamber is presently one of the leading technologies to search for dark matter particles with masses below 10 GeV/c$^2$. This was demonstrated by the DarkSide-50 experiment with approximately 50 kg of low-radioactivity liquid argon as target material. The next generation experiment DarkSide-20k, currently under construction, will use 1,000 times more arg… ▽ More The dual-phase liquid argon time projection chamber is presently one of the leading technologies to search for dark matter particles with masses below 10 GeV/c$^2$. This was demonstrated by the DarkSide-50 experiment with approximately 50 kg of low-radioactivity liquid argon as target material. The next generation experiment DarkSide-20k, currently under construction, will use 1,000 times more argon and is expected to start operation in 2027. Based on the DarkSide-50 experience, here we assess the DarkSide-20k sensitivity to models predicting light dark matter particles, including Weakly Interacting Massive Particles (WIMPs) and sub-GeV/c$^2$ particles interacting with electrons in argon atoms. With one year of data, a sensitivity improvement to dark matter interaction cross-sections by at least one order of magnitude with respect to DarkSide-50 is expected for all these models. A sensitivity to WIMP--nucleon interaction cross-sections below $1\times10^{-42}$ cm$^2$ is achievable for WIMP masses above 800 MeV/c$^2$. With 10 years exposure, the neutrino fog can be reached for WIMP masses around 5 GeV/c$^2$. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: submitted to Nature Communications

A quantum mechanical evaluation of the intermediate scattering function

Authors: Oussama Bindech, Roberto Marquardt, Fabien Gatti, Souvik Mandal, Jean Christophe Tremblay

Abstract: The intermediate scattering function is interpreted as a correlation function of thermal wave packets of the scattering centers perturbed by the scattering particles at different times. A proof of concept is given at the example of ballistic moving centers. The ensuing numerical method is then illustrated at the example of CO adsorbed on Cu(100). The intermediate scattering function is interpreted as a correlation function of thermal wave packets of the scattering centers perturbed by the scattering particles at different times. A proof of concept is given at the example of ballistic moving centers. The ensuing numerical method is then illustrated at the example of CO adsorbed on Cu(100). △ Less

Submitted 3 July, 2024; originally announced July 2024.

Comments: 8 pages, 2 figures

MSC Class: 81; 82

Guess the Drift with LOP-UKF: LiDAR Odometry and Pacejka Model for Real-Time Racecar Sideslip Estimation

Authors: Alessandro Toschi, Nicola Musiu, Francesco Gatti, Ayoub Raji, Francesco Amerotti, Micaela Verucchi, Marko Bertogna

Abstract: The sideslip angle, crucial for vehicle safety and stability, is determined using both longitudinal and lateral velocities. However, measuring the lateral component often necessitates costly sensors, leading to its common estimation, a topic thoroughly explored in existing literature. This paper introduces LOP-UKF, a novel method for estimating vehicle lateral velocity by integrating Lidar Odometr… ▽ More The sideslip angle, crucial for vehicle safety and stability, is determined using both longitudinal and lateral velocities. However, measuring the lateral component often necessitates costly sensors, leading to its common estimation, a topic thoroughly explored in existing literature. This paper introduces LOP-UKF, a novel method for estimating vehicle lateral velocity by integrating Lidar Odometry with the Pacejka tire model predictions, resulting in a robust estimation via an Unscendent Kalman Filter (UKF). This combination represents a distinct alternative to more traditional methodologies, resulting in a reliable solution also in edge cases. We present experimental results obtained using the Dallara AV-21 across diverse circuits and track conditions, demonstrating the effectiveness of our method. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: Accepted to 35th IEEE Intelligent Vehicles Symposium - IEEE IV 2024

A new hybrid gadolinium nanoparticles-loaded polymeric material for neutron detection in rare event searches

Authors: DarkSide-20k Collaboration, :, F. Acerbi, P. Adhikari, P. Agnes, I. Ahmad, S. Albergo, I. F. Albuquerque, T. Alexander, A. K. Alton, P. Amaudruz, M. Angiolilli, E. Aprile, R. Ardito, M. Atzori Corona, D. J. Auty, M. Ave, I. C. Avetisov, O. Azzolini, H. O. Back, Z. Balmforth, A. Barrado Olmedo, P. Barrillon, G. Batignani, P. Bhowmick , et al. (290 additional authors not shown)

Abstract: Experiments aimed at direct searches for WIMP dark matter require highly effective reduction of backgrounds and control of any residual radioactive contamination. In particular, neutrons interacting with atomic nuclei represent an important class of backgrounds due to the expected similarity of a WIMP-nucleon interaction, so that such experiments often feature a dedicated neutron detector surround… ▽ More Experiments aimed at direct searches for WIMP dark matter require highly effective reduction of backgrounds and control of any residual radioactive contamination. In particular, neutrons interacting with atomic nuclei represent an important class of backgrounds due to the expected similarity of a WIMP-nucleon interaction, so that such experiments often feature a dedicated neutron detector surrounding the active target volume. In the context of the development of DarkSide-20k detector at INFN Gran Sasso National Laboratory (LNGS), several R&D projects were conceived and developed for the creation of a new hybrid material rich in both hydrogen and gadolinium nuclei to be employed as an essential element of the neutron detector. Thanks to its very high cross-section for neutron capture, gadolinium is one of the most widely used elements in neutron detectors, while the hydrogen-rich material is instrumental in efficiently moderating the neutrons. In this paper results from one of the R&Ds are presented. In this effort the new hybrid material was obtained as a poly(methyl methacrylate) (PMMA) matrix, loaded with gadolinium oxide in the form of nanoparticles. We describe its realization, including all phases of design, purification, construction, characterization, and determination of mechanical properties of the new material. △ Less

Submitted 29 April, 2024; originally announced April 2024.

Multiple-Input Fourier Neural Operator (MIFNO) for source-dependent 3D elastodynamics

Authors: Fanny Lehmann, Filippo Gatti, Didier Clouteau

Abstract: Numerical simulations are essential tools to evaluate the solution of the wave equation in complex settings, such as three-dimensional (3D) domains with heterogeneous properties. However, their application is limited by high computational costs and existing surrogate models lack the flexibility of numerical solvers. This work introduces the Multiple-Input Fourier Neural Operator (MIFNO) to deal wi… ▽ More Numerical simulations are essential tools to evaluate the solution of the wave equation in complex settings, such as three-dimensional (3D) domains with heterogeneous properties. However, their application is limited by high computational costs and existing surrogate models lack the flexibility of numerical solvers. This work introduces the Multiple-Input Fourier Neural Operator (MIFNO) to deal with structured 3D fields representing material properties as well as vectors describing the source characteristics. The MIFNO is applied to the problem of elastic wave propagation in the Earth's crust. It is trained on the HEMEW^S-3D database containing 30000 earthquake simulations in different heterogeneous domains with random source positions and orientations. Outputs are time- and space-dependent surface wavefields. The MIFNO predictions are assessed as good to excellent based on Goodness-Of-Fit (GOF) criteria. Wave arrival times and wave fronts' propagation are very accurate since 80% of the predictions have an excellent phase GOF. The fluctuations amplitudes are good for 87% of the predictions. The envelope score is hindered by the small-scale fluctuations that are challenging to capture due to the complex physical phenomena associated with high-frequency features. Nevertheless, the MIFNO can generalize to sources located outside the training domain and it shows good generalization ability to a real complex overthrust geology. When focusing on a region of interest, transfer learning improves the accuracy with limited additional costs, since GOF scores improved by more than 1 GOF unit with only 500 additional specific samples. The MIFNO is the first surrogate model offering the flexibility of an earthquake simulator with varying sources and material properties. Its good accuracy and massive speed-up offer new perspectives to replace numerical simulations in many-query problems. △ Less

Submitted 15 April, 2024; originally announced April 2024.

The TES-based Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU: a large area silicon microcalorimeter for background particles detection

Authors: M. D'Andrea, C. Macculi, S. Lotti, L. Piro, A. Argan, G. Minervini, G. Torrioli, F. Chiarello, L. Ferrari Barusso, E. Celasco, G. Gallucci, F. Gatti, D. Grosso, M. Rigano, D. Brienza, E. Cavazzuti, A. Volpe

Abstract: We are develo** the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diag… ▽ More We are develo** the Cryogenic AntiCoincidence detector (CryoAC) of the ATHENA X-IFU spectrometer. It is a TES-based particle detector aimed to reduce the background of the instrument. Here, we present the result obtained with the last CryoAC single-pixel prototype. It is based on a 1 cm2 silicon absorber sensed by a single 2mm x 1mm Ir/Au TES, featuring an on-chip heater for calibration and diagnostic purposes. We have illuminated the sample with 55Fe (6 keV line) and 241Am (60 keV line) radioactive sources, thus studying the detector response and the heater calibration accuracy at low energy. Furthermore, we have operated the sample in combination with a past-generation CryoAC prototype. Here, by analyzing the coincident detections between the two detectors, we have been able to characterize the background spectrum of the laboratory environment and disentangle the primary (i.e. cosmic muons) and secondaries (mostly secondary photons and electrons) signatures in the spectral shape. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-20 special issue

er.autopilot 1.0: The Full Autonomous Stack for Oval Racing at High Speeds

Authors: Ayoub Raji, Danilo Caporale, Francesco Gatti, Andrea Giove, Micaela Verucchi, Davide Malatesta, Nicola Musiu, Alessandro Toschi, Silviu Roberto Popitanu, Fabio Bagni, Massimiliano Bosi, Alexander Liniger, Marko Bertogna, Daniele Morra, Francesco Amerotti, Luca Bartoli, Federico Martello, Riccardo Porta

Abstract: The Indy Autonomous Challenge (IAC) brought together for the first time in history nine autonomous racing teams competing at unprecedented speed and in head-to-head scenario, using independently developed software on open-wheel racecars. This paper presents the complete software architecture used by team TII EuroRacing (TII-ER), covering all the modules needed to avoid static obstacles, perform ac… ▽ More The Indy Autonomous Challenge (IAC) brought together for the first time in history nine autonomous racing teams competing at unprecedented speed and in head-to-head scenario, using independently developed software on open-wheel racecars. This paper presents the complete software architecture used by team TII EuroRacing (TII-ER), covering all the modules needed to avoid static obstacles, perform active overtakes and reach speeds above 75 m/s (270 km/h). In addition to the most common modules related to perception, planning, and control, we discuss the approaches used for vehicle dynamics modelling, simulation, telemetry, and safety. Overall results and the performance of each module are described, as well as the lessons learned during the first two events of the competition on oval tracks, where the team placed respectively second and third. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Comments: Preprint: Accepted to Field Robotics "Opportunities and Challenges with Autonomous Racing" Special Issue

Journal ref: Field Robotics, January 2024, Volume 4

A search for $μ^+\to e^+γ$ with the first dataset of the MEG II experiment

Authors: MEG II collaboration, K. Afanaciev, A. M. Baldini, S. Ban, V. Baranov, H. Benmansour, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, G. Dal Maso, A. De Bari, M. De Gerone, L. Ferrari Barusso, M. Francesconi, L. Galli, G. Gallucci, F. Gatti, L. Gerritzen, F. Grancagnolo , et al. (57 additional authors not shown)

Abstract: The MEG II experiment, based at the Paul Scherrer Institut in Switzerland, reports the result of a search for the decay $μ^+\to e^+γ$ from data taken in the first physics run in 2021. No excess of events over the expected background is observed, yielding an upper limit on the branching ratio of B($μ^+\to e^+γ$) < $7.5 \times 10^{-13}$ (90% C.L.). The combination of this result and the limit obtain… ▽ More The MEG II experiment, based at the Paul Scherrer Institut in Switzerland, reports the result of a search for the decay $μ^+\to e^+γ$ from data taken in the first physics run in 2021. No excess of events over the expected background is observed, yielding an upper limit on the branching ratio of B($μ^+\to e^+γ$) < $7.5 \times 10^{-13}$ (90% C.L.). The combination of this result and the limit obtained by MEG gives B($μ^+\to e^+γ$) < $3.1 \times 10^{-13}$ (90% C.L.), which is the most stringent limit to date. A ten-fold larger sample of data is being collected during the years 2022-2023, and data-taking will continue in the coming years. △ Less

Submitted 7 January, 2024; v1 submitted 19 October, 2023; originally announced October 2023.

Comments: 10 pages, 6 figures. To be published in EPJC

Operation and performance of MEG II detector

Authors: MEG II Collaboration, K. Afanaciev, A. M. Baldini, S. Ban, V. Baranov, H. Benmansour, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, A. Corvaglia, F. Cuna, G. Dal Maso, A. De Bari, M. De Gerone, L. Ferrari Barusso, M. Francesconi, L. Galli, G. Gallucci, F. Gatti, L. Gerritzen, F. Grancagnolo , et al. (60 additional authors not shown)

Abstract: The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation… ▽ More The MEG II experiment, located at the Paul Scherrer Institut (PSI) in Switzerland, is the successor to the MEG experiment, which completed data taking in 2013. MEG II started fully operational data taking in 2021, with the goal of improving the sensitivity of the mu+ -> e+ gamma decay down to 6e-14 almost an order of magnitude better than the current limit. In this paper, we describe the operation and performance of the experiment and give a new estimate of its sensitivity versus data acquisition time. △ Less

Submitted 8 January, 2024; v1 submitted 18 October, 2023; originally announced October 2023.

Comments: 42 pages, 55 figures. Submitted to EPJC

Fourier Neural Operator Surrogate Model to Predict 3D Seismic Waves Propagation

Authors: Fanny Lehmann, Filippo Gatti, Michaël Bertin, Didier Clouteau

Abstract: With the recent rise of neural operators, scientific machine learning offers new solutions to quantify uncertainties associated with high-fidelity numerical simulations. Traditional neural networks, such as Convolutional Neural Networks (CNN) or Physics-Informed Neural Networks (PINN), are restricted to the prediction of solutions in a predefined configuration. With neural operators, one can learn… ▽ More With the recent rise of neural operators, scientific machine learning offers new solutions to quantify uncertainties associated with high-fidelity numerical simulations. Traditional neural networks, such as Convolutional Neural Networks (CNN) or Physics-Informed Neural Networks (PINN), are restricted to the prediction of solutions in a predefined configuration. With neural operators, one can learn the general solution of Partial Differential Equations, such as the elastic wave equation, with varying parameters. There have been very few applications of neural operators in seismology. All of them were limited to two-dimensional settings, although the importance of three-dimensional (3D) effects is well known. In this work, we apply the Fourier Neural Operator (FNO) to predict ground motion time series from a 3D geological description. We used a high-fidelity simulation code, SEM3D, to build an extensive database of ground motions generated by 30,000 different geologies. With this database, we show that the FNO can produce accurate ground motion even when the underlying geology exhibits large heterogeneities. Intensity measures at moderate and large periods are especially well reproduced. We present the first seismological application of Fourier Neural Operators in 3D. Thanks to the generalizability of our database, we believe that our model can be used to assess the influence of geological features such as sedimentary basins on ground motion, which is paramount to evaluating site effects. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Charge transfer of polyatomic molecules in ion-atom hybrid traps: Stereodynamics in the millikelvin regime

Authors: Alexandre Voute, Alexander Dörfler, Laurent Wiesenfeld, Olivier Dulieu, Fabien Gatti, Daniel Peláez, Stefan Willitsch

Abstract: Rate constants for the charge transfer reaction between N${}_{2}$H${}^{+}$ and Rb in the mK regime are measured in an ion-atom hybrid trap and are found to be lower than the Langevin capture limit. Multireference ab initio computation of the potential energy surfaces involved in the reaction reveals that the low-temperature charge transfer is hindered by short-range features highly dependent on th… ▽ More Rate constants for the charge transfer reaction between N${}_{2}$H${}^{+}$ and Rb in the mK regime are measured in an ion-atom hybrid trap and are found to be lower than the Langevin capture limit. Multireference ab initio computation of the potential energy surfaces involved in the reaction reveals that the low-temperature charge transfer is hindered by short-range features highly dependent on the collision angle and is promoted by a deformation of the molecular frame. The present study highlights the importance of polyatomic effects and of stereodynamics in cold molecular ion-neutral collisions. △ Less

Submitted 11 July, 2023; v1 submitted 27 March, 2023; originally announced March 2023.

Comments: See supplemental material for details on electronic structure methods, estimates of transition probabilities and timescales, and other PES cuts

The Athena X-ray Integral Field Unit: a consolidated design for the system requirement review of the preliminary definition phase

Authors: Didier Barret, Vincent Albouys, Jan-Willem den Herder, Luigi Piro, Massimo Cappi, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Stéphane Paltani, Gregor Rauw, Agata Rozanska, Jiri Svoboda, Joern Wilms, Noriko Yamasaki, Marc Audard, Simon Bandler, Marco Barbera, Xavier Barcons, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Elisa Costantini, Thomas Dauser, Anne Decourchelle, Lionel Duband , et al. (274 additional authors not shown)

Abstract: The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide sp… ▽ More The Athena X-ray Integral Unit (X-IFU) is the high resolution X-ray spectrometer, studied since 2015 for flying in the mid-30s on the Athena space X-ray Observatory, a versatile observatory designed to address the Hot and Energetic Universe science theme, selected in November 2013 by the Survey Science Committee. Based on a large format array of Transition Edge Sensors (TES), it aims to provide spatially resolved X-ray spectroscopy, with a spectral resolution of 2.5 eV (up to 7 keV) over an hexagonal field of view of 5 arc minutes (equivalent diameter). The X-IFU entered its System Requirement Review (SRR) in June 2022, at about the same time when ESA called for an overall X-IFU redesign (including the X-IFU cryostat and the cooling chain), due to an unanticipated cost overrun of Athena. In this paper, after illustrating the breakthrough capabilities of the X-IFU, we describe the instrument as presented at its SRR, browsing through all the subsystems and associated requirements. We then show the instrument budgets, with a particular emphasis on the anticipated budgets of some of its key performance parameters. Finally we briefly discuss on the ongoing key technology demonstration activities, the calibration and the activities foreseen in the X-IFU Instrument Science Center, and touch on communication and outreach activities, the consortium organisation, and finally on the life cycle assessment of X-IFU aiming at minimising the environmental footprint, associated with the development of the instrument. Thanks to the studies conducted so far on X-IFU, it is expected that along the design-to-cost exercise requested by ESA, the X-IFU will maintain flagship capabilities in spatially resolved high resolution X-ray spectroscopy, enabling most of the original X-IFU related scientific objectives of the Athena mission to be retained. (abridged). △ Less

Submitted 28 November, 2022; v1 submitted 30 August, 2022; originally announced August 2022.

Comments: 48 pages, 29 figures, Accepted for publication in Experimental Astronomy with minor editing

ATHENA X-IFU Demonstration Model: First joint operation of the main TES Array and its Cryogenic AntiCoincidence Detector (CryoAC)

Authors: M. D'Andrea, K. Ravensberg, A. Argan, D. Brienza, S. Lotti, C. Macculi, G. Minervini, L. Piro, G. Torrioli, F. Chiarello, L. Ferrari Barusso, M. Biasotti, G. Gallucci, F. Gatti, M. Rigano, H. Akamatsu, J. Dercksen, L. Gottardi, F. de Groote, R. den Hartog, J. -W. den Herder, R. Hoogeveen, B. Jackson, A. McCalden, S. Rosman , et al. (6 additional authors not shown)

Abstract: The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonst… ▽ More The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonstration Models, performed in a FDM setup. We show that it is possible to operate properly both detectors, and we provide a preliminary demonstration of the anti-coincidence capability of the system achieved by the simultaneous detection of cosmic muons. △ Less

Submitted 30 June, 2022; originally announced June 2022.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-19 special issue

Stochastic Multi Configuration Time-Dependent Hartree for Dissipative Quantum Dynamics with Strong Intramolecular Coupling

Authors: Souvik Mandal, Fabien Gatti, Oussama Bindech, Roberto Marquardt, Jean Christophe Tremblay

Abstract: In this article, we explore the dissipation dynamics of a strongly coupled multidimensional system in contact with a Markovian bath following a system-bath approach. We use in this endeavour the recently developed stochastic Multi-Configuration Time-Dependent Hartree approach within the Monte Carlo wave packet formalism [J.Chem.Phys.156, 094109 (2022)]. The method proved to yield thermalized ensem… ▽ More In this article, we explore the dissipation dynamics of a strongly coupled multidimensional system in contact with a Markovian bath following a system-bath approach. We use in this endeavour the recently developed stochastic Multi-Configuration Time-Dependent Hartree approach within the Monte Carlo wave packet formalism [J.Chem.Phys.156, 094109 (2022)]. The method proved to yield thermalized ensembles of wave packets when intramolecular coupling is weak. To treat strongly coupled systems, new Lindblad dissipative operators are constructed as linear combinations of the system coordinates and associated momenta. These are obtained by an unitary transformation to a normal mode representation, which reduces intermode coupling up to second order. Additionally, we use combinations of generalized raising/lowering operators to enforce the Boltzmann distribution in the dissipation operators, which yield perfect thermalization in the harmonic limit. The two ansatz are tested using a model two-dimensional hamiltonian parameterized to disentangle the effects of intramolecular potential coupling, of strong mode mixing observed in Fermi resonances, and of anharmonicity. △ Less

Submitted 16 June, 2022; originally announced June 2022.

Comments: 32 pages, 11 figures

Intramolecular Vibrational Redistribution in Formic Acid and its Deuterated Forms

Authors: Antoine Aerts, Alex Brown, Fabien Gatti

Abstract: The intramolecular vibrational relaxation dynamics of formic acid and its deuterated isotopologues is simulated on the full-dimensional potential energy surface of Richter and Carbonniere [F. Richter and P. Carbonniere, J. Chem. Phys., 148, 064303 (2018)] using the Heidelberg MCTDH package. Mode couplings with the torsion coordinate capturing most of the trans-cis isomerisation are identified in t… ▽ More The intramolecular vibrational relaxation dynamics of formic acid and its deuterated isotopologues is simulated on the full-dimensional potential energy surface of Richter and Carbonniere [F. Richter and P. Carbonniere, J. Chem. Phys., 148, 064303 (2018)] using the Heidelberg MCTDH package. Mode couplings with the torsion coordinate capturing most of the trans-cis isomerisation are identified in the dynamics of artificially excited vibrational mode overtones. The C-O stretch bright vibrational mode is coupled to the out-of-the plane torsion mode in HCOOH, where this coupling could be exploited for laser-induced trans-to-cis isomerisation. Strong isotopic effects are observed: deuteration of the hydroxyl group, i.e., in HCOOD and DCOOD, destroys the C-O stretch to torsion mode coupling whereas in DCOOH, little to no effect is observed. △ Less

Submitted 25 May, 2022; originally announced May 2022.

Comments: 28 pages, 7 figures

Laser control strategies in full dimensional funneling dynamics: The case of pyrazine

Authors: Samrit Mainali, Fabien Gatti, Osman Atabek

Abstract: Motivated by the major role funneling dynamics plays in light-harvesting processes, we built some laser control strategies inspired from basic mechanisms such as interference and kicks, and apply them to the case of pyrazine. We are studying the internal conversion between the two excited states, the highest and directly reachable from the initial ground state being considered as a donor, and the… ▽ More Motivated by the major role funneling dynamics plays in light-harvesting processes, we built some laser control strategies inspired from basic mechanisms such as interference and kicks, and apply them to the case of pyrazine. We are studying the internal conversion between the two excited states, the highest and directly reachable from the initial ground state being considered as a donor, and the lowest as an acceptor. The ultimate control objective is the maximum population deposit in the otherwise dark acceptor, from a two-step process: radiative excitation of the donor, followed by a conical-intersection-mediated funneling towards the acceptor. The overall idea is to first obtain the control field parameters (individual pulses leading frequency and intensity, duration and inter-pulse time delay) for tractable reduced dimensional models basically describing the conical intersection branching space. Once these parameters are optimized, they are fixed and used in full dimensional dynamics describing the electronic population transfer. In the case of pyrazine, the reduced model is 4 dimensional, whereas the full dynamics involve 24 vibrational modes. Within experimentally achievable electromagnetic field requirements, we obtain a robust control with about 60 % of the ground state population deposited in the acceptor state, while about 16 % remains in the donor. Moreover, we anticipate a possible transposition to the control of even larger molecular systems, for which only a small number of normal modes are active, among all the others acting as spectators in the dynamics. △ Less

Submitted 24 May, 2022; originally announced May 2022.

Comments: 12 pages, 12 figures

The coupling of the hydrated proton to its first solvation shell

Authors: Markus Schröder, Fabien Gatti, David Lauvergnat, Hans-Dieter Meyer, Oriol Vendrell

Abstract: The transfer of a hydrated proton between water molecules in aqueous solution is accompanied by the large-scale structural reorganization of the environment as the proton relocates, giving rise to the Grotthus mechanism. The Zundel (H5O2+) and Eigen (H9O4+) cations are the main intermediate structures in this process. They exhibit radically different gas-phase infrared (IR) spectra, indicating fun… ▽ More The transfer of a hydrated proton between water molecules in aqueous solution is accompanied by the large-scale structural reorganization of the environment as the proton relocates, giving rise to the Grotthus mechanism. The Zundel (H5O2+) and Eigen (H9O4+) cations are the main intermediate structures in this process. They exhibit radically different gas-phase infrared (IR) spectra, indicating fundamentally different environments of the solvated proton in its first solvation shell. The question arises: is there a least common denominator structure that explains the IR spectra of the Zundel and Eigen cations, and hence of the solvated proton? Full dimensional quantum simulations of these protonated cations demonstrate that two dynamical water molecules embedded in the static environment of the parent Eigen cation constitute this fundamental subunit. It is sufficient to explain the spectral signatures and anharmonic couplings of the solvated proton in its first solvation shell. In particular, we identify the anharmonic vibrational modes that explain the large broadening of the proton transfer peak in the experimental IR spectrum of the Eigen cation, of which the origin remained so far unclear. Our findings about the quantum mechanical structure of the first solvation shell provide a starting point for further investigations of the larger protonated water clusters with second and additional solvation shells. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Comments: main article with 4 figures, methods, and supporting information

Heisenberg's uncertainty principle in the PTOLEMY project: a theory update

Authors: PTOLEMY Collaboration, A. Apponi, M. G. Betti, M. Borghesi, A. Boyarsky, N. Canci, G. Cavoto, C. Chang, V. Cheianov, Y. Cheipesh, W. Chung, A. G. Cocco, A. P. Colijn, N. D'Ambrosio, N. de Groot, A. Esposito, M. Faverzani, A. Ferella, E. Ferri, L. Ficcadenti, T. Frederico, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero , et al. (36 additional authors not shown)

Abstract: We discuss the consequences of the quantum uncertainty on the spectrum of the electron emitted by the $β$-processes of a tritium atom bound to a graphene sheet. We analyze quantitatively the issue recently raised in [Cheipesh et al., Phys. Rev. D 104, 116004 (2021)], and discuss the relevant time scales and the degrees of freedom that can contribute to the intrinsic spread in the electron energy.… ▽ More We discuss the consequences of the quantum uncertainty on the spectrum of the electron emitted by the $β$-processes of a tritium atom bound to a graphene sheet. We analyze quantitatively the issue recently raised in [Cheipesh et al., Phys. Rev. D 104, 116004 (2021)], and discuss the relevant time scales and the degrees of freedom that can contribute to the intrinsic spread in the electron energy. We perform careful calculations of the potential between tritium and graphene with different coverages and geometries. With this at hand, we propose possible avenues to mitigate the effect of the quantum uncertainty. △ Less

Submitted 6 September, 2022; v1 submitted 21 March, 2022; originally announced March 2022.

Comments: 14 pages, 5 figures

Journal ref: Phys.Rev.D 106 (2022) 5, 053002

White Paper on Light Sterile Neutrino Searches and Related Phenomenology

Authors: M. A. Acero, C. A. Argüelles, M. Hostert, D. Kalra, G. Karagiorgi, K. J. Kelly, B. Littlejohn, P. Machado, W. Pettus, M. Toups, M. Ross-Lonergan, A. Sousa, P. T. Surukuchi, Y. Y. Y. Wong, W. Abdallah, A. M. Abdullahi, R. Akutsu, L. Alvarez-Ruso, D. S. M. Alves, A. Aurisano, A. B. Balantekin, J. M. Berryman, T. Bertólez-Martínez, J. Brunner, M. Blennow , et al. (147 additional authors not shown)

Abstract: This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference,… ▽ More This white paper provides a comprehensive review of our present understanding of experimental neutrino anomalies that remain unresolved, charting the progress achieved over the last decade at the experimental and phenomenological level, and sets the stage for future programmatic prospects in addressing those anomalies. It is purposed to serve as a guiding and motivational "encyclopedic" reference, with emphasis on needs and options for future exploration that may lead to the ultimate resolution of the anomalies. We see the main experimental, analysis, and theory-driven thrusts that will be essential to achieving this goal being: 1) Cover all anomaly sectors -- given the unresolved nature of all four canonical anomalies, it is imperative to support all pillars of a diverse experimental portfolio, source, reactor, decay-at-rest, decay-in-flight, and other methods/sources, to provide complementary probes of and increased precision for new physics explanations; 2) Pursue diverse signatures -- it is imperative that experiments make design and analysis choices that maximize sensitivity to as broad an array of these potential new physics signatures as possible; 3) Deepen theoretical engagement -- priority in the theory community should be placed on development of standard and beyond standard models relevant to all four short-baseline anomalies and the development of tools for efficient tests of these models with existing and future experimental datasets; 4) Openly share data -- Fluid communication between the experimental and theory communities will be required, which implies that both experimental data releases and theoretical calculations should be publicly available; and 5) Apply robust analysis techniques -- Appropriate statistical treatment is crucial to assess the compatibility of data sets within the context of any given model. △ Less

Submitted 17 May, 2023; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021 by the NF02 Topical Group (Understanding Experimental Neutrino Anomalies). Submitted to J. Phys. G as a Major Report

Implementation and Optimization of the PTOLEMY Transverse Drift Electromagnetic Filter

Authors: A. Apponi, M. G. Betti, M. Borghesi, A. Boscá, F. Calle, N. Canci, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, N. D'Ambrosio, N. de Groot, M. Faverzani, A. Ferella, E. Ferri, L. Ficcadenti, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, Y. Hochberg, Y. Kahn , et al. (31 additional authors not shown)

Abstract: The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the s… ▽ More The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the setting of filter electrode voltages are detailed. The challenges of low-energy electron transport in cases of low field are discussed, such as the growth of the cyclotron radius with decreasing magnetic field, which puts a ceiling on filter performance relative to fixed filter dimensions. Additionally, low pitch angle trajectories are dominated by motion parallel to the magnetic field lines and introduce non-adiabatic conditions and curvature drift. To minimize these effects and maximize electron acceptance into the filter, we present a three-potential-well design to simultaneously drain the parallel and transverse kinetic energies throughout the length of the filter. These optimizations are shown, in simulation, to achieve low-energy electron transport from a 1 T iron core (or 3 T superconducting) starting field with initial kinetic energy of 18.6 keV drained to <10 eV (<1 eV) in about 80 cm. This result for low field operation paves the way for the first demonstrator of the PTOLEMY spectrometer for measurement of electrons near the tritium endpoint to be constructed at the Gran Sasso National Laboratary (LNGS) in Italy. △ Less

Submitted 24 January, 2022; v1 submitted 23 August, 2021; originally announced August 2021.

Comments: 29 pages, 25 figures

The Search for $μ^+\to e^+ γ$ with 10$^{-14}$ Sensitivity: the Upgrade of the MEG Experiment

Authors: The MEG II Collaboration, Alessandro M. Baldini, Vladimir Baranov, Michele Biasotti, Gianluigi Boca, Paolo W. Cattaneo, Gianluca Cavoto, Fabrizio Cei, Marco Chiappini, Gianluigi Chiarello, Alessandro Corvaglia, Federica Cuna, Giovanni dal Maso, Antonio de Bari, Matteo De Gerone, Marco Francesconi, Luca Galli, Giovanni Gallucci, Flavio Gatti, Francesco Grancagnolo, Marco Grassi, Dmitry N. Grigoriev, Malte Hildebrandt, Kei Ieki, Fedor Ignatov , et al. (45 additional authors not shown)

Abstract: The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$)… ▽ More The MEG experiment took data at the Paul Scherrer Institute in the years 2009--2013 to test the violation of the lepton flavour conservation law, which originates from an accidental symmetry that the Standard Model of elementary particle physics has, and published the most stringent limit on the charged lepton flavour violating decay $μ^+ \rightarrow {\rm e}^+ γ$: BR($μ^+ \rightarrow {\rm e}^+ γ$) $<4.2 \times 10^{-13}$ at 90% confidence level. The MEG detector has been upgraded in order to reach a sensitivity of $6\times10^{-14}$. The basic principle of MEG II is to achieve the highest possible sensitivity using the full muon beam intensity at the Paul Scherrer Institute ($7\times10^{7}$ muons/s) with an upgraded detector. The main improvements are better rate capability of all sub-detectors and improved resolutions while kee** the same detector concept. In this paper, we present the current status of the preparation, integration and commissioning of the MEG II detector in the recent engineering runs. △ Less

Submitted 1 September, 2021; v1 submitted 22 July, 2021; originally announced July 2021.

Comments: 12 pages, 4 figures. The version of acceptance for Symmetry

Journal ref: Symmetry 2021, 13(9), 1591

Kolyvagin classes versus non-cristalline diagonal classes

Authors: Francesca Gatti, Victor Rotger

Abstract: Let $E/\mathbb{Q}$ be an elliptic curve having multiplicative reduction at a prime $p$. Let $(g,h)$ be a pair of eigenforms of weight $1$ arising as the theta series of an imaginary quadratic field $K$, and assume that the triple-product $L$-function $L(f,g,h,s)$ is self-dual and does not vanish at the central critical point $s=1$. The main result of this article is a formula expressing the $p$-ad… ▽ More Let $E/\mathbb{Q}$ be an elliptic curve having multiplicative reduction at a prime $p$. Let $(g,h)$ be a pair of eigenforms of weight $1$ arising as the theta series of an imaginary quadratic field $K$, and assume that the triple-product $L$-function $L(f,g,h,s)$ is self-dual and does not vanish at the central critical point $s=1$. The main result of this article is a formula expressing the $p$-adic iterated integrals introduced in [DLR] to the Kolyvagin classes associated by Bertolini and Darmon to a system of Heegner points on $E$. △ Less

Submitted 21 March, 2021; originally announced March 2021.

Progress in the development of TES microcalorimeter detectors suitable for neutrino mass measurement

Authors: A. Giachero, B. Alpert, D. T. Becker, D. A. Bennett, M. Borghesi, M. De Gerone, M. Faverzani, M. Fedkevych, E. Ferri, G. Gallucci, J. D. Gard, F. Gatti, G. C. Hilton, J. A. B. Mates, A. Nucciotti, G. Pessina, A. Puiu, C. D. Reintsema, D. R. Schmidt, D. S. Swetz, J. N. Ullom, L. R. Vale

Abstract: The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Tran… ▽ More The HOLMES experiment will perform a precise calorimetric measurement of the end point of the Electron Capture (EC) decay spectrum of 163Ho in order to extract information on neutrino mass with a sensitivity below 2 eV. In its final configuration, HOLMES will deploy 1000 detectors of low-temperature microcalorimeters with implanted 163Ho nuclei. The baseline sensors for HOLMES are Mo/Cu TESs (Transition Edge Sensors) on SiNx membrane with gold absorbers. Considering the large number of pixels and an event rate of about 300 Hz/pixel, a large multiplexing factor and a large bandwidth are needed. To fulfill this requirement, HOLMES will exploit recent advances in microwave multiplexing. In this contribution, we present the status of the activities in development, the performances of the developed microwave-multiplexed readout system, and the results obtained with the detectors specifically designed for HOLMES in terms of noise, time, and energy resolutions △ Less

Submitted 7 January, 2021; originally announced January 2021.

The large scale polarization explorer (LSPE) for CMB measurements: performance forecast

Authors: The LSPE collaboration, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. S. Battistelli, A. Baù, P. de Bernardis, M. Bersanelli, M. Biasotti, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, F. Cuttaia, G. D'Alessandro, G. De Gasperis, M. De Petris, V. Fafone , et al. (80 additional authors not shown)

Abstract: [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very ear… ▽ More [Abridged] The measurement of the polarization of the Cosmic Microwave Background radiation is one of the current frontiers in cosmology. In particular, the detection of the primordial B-modes, could reveal the presence of gravitational waves in the early Universe. The detection of such component is at the moment the most promising technique to probe the inflationary theory describing the very early evolution of the Universe. We present the updated performance forecast of the Large Scale Polarization Explorer (LSPE), a program dedicated to the measurement of the CMB polarization. LSPE is composed of two instruments: Strip, a radiometer-based telescope on the ground in Tenerife, and SWIPE (Short-Wavelength Instrument for the Polarization Explorer) a bolometer-based instrument designed to fly on a winter arctic stratospheric long-duration balloon. The program is among the few dedicated to observation of the Northern Hemisphere, while most of the international effort is focused into ground-based observation in the Southern Hemisphere. Measurements are currently scheduled in Winter 2021/22 for SWIPE, with a flight duration up to 15 days, and in Summer 2021 with two years observations for Strip. We describe the main features of the two instruments, identifying the most critical aspects of the design, in terms of impact into performance forecast. We estimate the expected sensitivity of each instrument and propagate their combined observing power to the sensitivity to cosmological parameters, including the effect of scanning strategy, component separation, residual foregrounds and partial sky coverage. We also set requirements on the control of the most critical systematic effects and describe techniques to mitigate their impact. LSPE can reach a sensitivity in tensor-to-scalar ratio of $σ_r<0.01$, and improve constrains on other cosmological parameters. △ Less

Submitted 9 August, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: Submitted to JCAP. Abstract abridged for arXiv submission

Journal ref: Journal of Cosmology and Astroparticle Physics, Volume 2021, August 2021

A novel dowscaling procedure for compositional data in the Aitchison geometry with application to soil texture data

Authors: Federico Gatti, Alessandra Menafoglio, Niccolò Togni, Luca Bonaventura, Davide Brambilla, Monica Papini, Laura Longoni

Abstract: In this work, we present a novel downscaling procedure for compositional quantities based on the Aitchison geometry. The method is able to naturally consider compositional constraints, i.e. unit-sum and positivity. We show that the method can be used in a block sequential Gaussian simulation framework in order to assess the variability of downscaled quantities. Finally, to validate the method, we… ▽ More In this work, we present a novel downscaling procedure for compositional quantities based on the Aitchison geometry. The method is able to naturally consider compositional constraints, i.e. unit-sum and positivity. We show that the method can be used in a block sequential Gaussian simulation framework in order to assess the variability of downscaled quantities. Finally, to validate the method, we test it first in an idealized scenario and then apply it for the downscaling of digital soil maps on a more realistic case study. The digital soil maps for the realistic case study are obtained from SoilGrids, a system for automated soil map** based on state-of-the-art spatial predictions methods. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Timing resolution of a plastic scintillator counter read out by radiation damaged SiPMs connected in series

Authors: G. Boca, P. W. Cattaneo, M. De Gerone, F. Gatti, M. Nakao, M. Nishimura, W. Ootani, M. Rossella, Y. Uchiyama, M. Usami, K. Yanai

Abstract: This paper discusses the effects of radiation damage to SiPMs on the performances of plastic scintillator counters with series-connected SiPM readout, focusing on timing measurements. The performances of a counter composed of a $120 \times 40 \times5~\mathrm{mm}^3$ scintillator tile read out by two sets of six SiPMs from AdvanSiD connected in series attached on the short sides are presented, for d… ▽ More This paper discusses the effects of radiation damage to SiPMs on the performances of plastic scintillator counters with series-connected SiPM readout, focusing on timing measurements. The performances of a counter composed of a $120 \times 40 \times5~\mathrm{mm}^3$ scintillator tile read out by two sets of six SiPMs from AdvanSiD connected in series attached on the short sides are presented, for different combinations of SiPMs at various levels of irradiation. Firstly, six SiPMs were equally irradiated with electrons from $^{90}$Sr sources up to a fluence of $Φ_\mathrm{e^-}\approx 3 \times 10^{12}~\mathrm{cm}^{-2}$. The timing resolution of the counter gradually deteriorated by the increase in dark current. The dark current and the deterioration were reduced when the counter was cooled from 30$^\circ$C to 10$^\circ$C. Secondly, 33 SiPMs were irradiated with reactor neutrons. The characteristics of counters read out by series-connected SiPMs with non-uniform damage levels, were investigated. The signal pulse height, the time response, and the timing resolution depend on the hit position in the counter, when SiPMs' irradiation is not uniform. △ Less

Submitted 9 October, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Comments: 13 pages, 27 figures, Major revision based on the reviewers' comments

Progress report on the Large Scale Polarization Explorer

Authors: L. Lamagna, G. Addamo, P. A. R. Ade, C. Baccigalupi, A. M. Baldini, P. M. Battaglia, E. Battistelli, A. Baù, M. Bersanelli, M. Biasotti, C. Boragno, A. Boscaleri, B. Caccianiga, S. Caprioli, F. Cavaliere, F. Cei, K. A. Cleary, F. Columbro, G. Coppi, A. Coppolecchia, D. Corsini, F. Cuttaia, G. D'Alessandro, P. de Bernardis, G. De Gasperis , et al. (74 additional authors not shown)

Abstract: The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by co… ▽ More The Large Scale Polarization Explorer (LSPE) is a cosmology program for the measurement of large scale curl-like features (B-modes) in the polarization of the Cosmic Microwave Background. Its goal is to constrain the background of inflationary gravity waves traveling through the universe at the time of matter-radiation decoupling. The two instruments of LSPE are meant to synergically operate by covering a large portion of the northern microwave sky. LSPE/STRIP is a coherent array of receivers planned to be operated from the Teide Observatory in Tenerife, for the control and characterization of the low-frequency polarized signals of galactic origin; LSPE/SWIPE is a balloon-borne bolometric polarimeter based on 330 large throughput multi-moded detectors, designed to measure the CMB polarization at 150 GHz and to monitor the polarized emission by galactic dust above 200 GHz. The combined performance and the expected level of systematics mitigation will allow LSPE to constrain primordial B-modes down to a tensor/scalar ratio of $10^{-2}$. We here report the status of the STRIP pre-commissioning phase and the progress in the characterization of the key subsystems of the SWIPE payload (namely the cryogenic polarization modulation unit and the multi-moded TES pixels) prior to receiver integration. △ Less

Submitted 5 May, 2020; v1 submitted 3 May, 2020; originally announced May 2020.

Comments: 8 pages, 5 figures, Accepted for publication in Journal of Low Temperature Physics

Search for lepton flavour violating muon decay mediated by a new light particle in the MEG experiment

Authors: A. M. Baldini, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, A. Corvaglia, A. de Bari, M. De Gerone, M. Francesconi, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, D. N. Grigoriev, M. Hildebrandt, Z. Hodge, K. Ieki, F. Ignatov, R. Iwai, T. Iwamoto , et al. (46 additional authors not shown)

Abstract: We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for l… ▽ More We present the first direct search for lepton flavour violating muon decay mediated by a new light particle X, $μ^+ \to \mathrm{e}^+\mathrm{X}, \mathrm{X} \to γγ$. This search uses a dataset resulting from $7.5\times 10^{14}$ stopped muons collected by the MEG experiment at the Paul Scherrer Institut in the period 2009--2013. No significant excess is found in the mass region 20--45 MeV/c$^2$ for lifetimes below 40 ps, and we set the most stringent branching ratio upper limits in the mass region of 20--40 MeV/c$^2$, down to $\mathcal{O}(10^{-11})$ at 90\% confidence level. △ Less

Submitted 8 November, 2020; v1 submitted 1 May, 2020; originally announced May 2020.

Construction of precision wire readout planes for the Short-Baseline Near Detector (SBND)

Authors: R. Acciarri, C. Adams, C. Andreopoulos, J. Asaadi, M. Babicz, C. Backhouse, W. Badgett, L. F. Bagby, D. Barker, C. Barnes, A. Basharina-Freshville, V. Basque, A. Baxter, M. C. Q. Bazetto, O. Beltramello, M. Betancourt, A. Bhanderi, A. Bhat, M. R. M. Bishai, A. Bitadze, A. S. T. Blake, J. Boissevain, C. Bonifazi, J. Y. Book, D. Brailsford , et al. (170 additional authors not shown)

Abstract: The Short-Baseline Near Detector time projection chamber is unique in the design of its charge readout planes. These anode plane assemblies (APAs) have been fabricated and assembled to meet strict accuracy and precision requirements: wire spacing of 3 mm +/- 0.5 mm and wire tension of 7 N +/- 1 N across 3,964 wires per APA, and flatness within 0.5 mm over the 4 m +/- 2.5 m extent of each APA. This… ▽ More The Short-Baseline Near Detector time projection chamber is unique in the design of its charge readout planes. These anode plane assemblies (APAs) have been fabricated and assembled to meet strict accuracy and precision requirements: wire spacing of 3 mm +/- 0.5 mm and wire tension of 7 N +/- 1 N across 3,964 wires per APA, and flatness within 0.5 mm over the 4 m +/- 2.5 m extent of each APA. This paper describes the design, manufacture and assembly of these key detector components, with a focus on the quality assurance at each stage. △ Less

Submitted 24 April, 2020; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: 42 pages, 45 figures. Prepared for submission to JINST

Special values of triple-product $p$-adic $L$-functions and non-crystalline diagonal classes

Authors: Francesca Gatti, Xavier Guitart, Marc Masdeu, Victor Rotger

Abstract: The main purpose of this note is to understand the arithmetic encoded in the special value of the $p$-adic $L$-function $\mathcal{L}_p^g(\mathbf{f},\mathbf{g},\mathbf{h})$ associated to a triple of modular forms $(f,g,h)$ of weights $(2,1,1)$, in the case where the classical $L$-function $L(f\otimes g\otimes h,s)$ - which typically has sign $+1$ - does not vanish at its central critical point… ▽ More The main purpose of this note is to understand the arithmetic encoded in the special value of the $p$-adic $L$-function $\mathcal{L}_p^g(\mathbf{f},\mathbf{g},\mathbf{h})$ associated to a triple of modular forms $(f,g,h)$ of weights $(2,1,1)$, in the case where the classical $L$-function $L(f\otimes g\otimes h,s)$ - which typically has sign $+1$ - does not vanish at its central critical point $s=1$. When $f$ corresponds to an elliptic curve $E/\mathbb{Q}$ and the classical $L$-function vanishes, the Elliptic Stark Conjecture of Darmon-Lauder-Rotger predicts that $\mathcal{L}_p^g(\mathbf{f},\mathbf{g},\mathbf{h})(2,1,1)$ is either $0$ (when the order of vanishing of the complex $L$-function is $>2$) or related to logarithms of global points on $E$ and a certain Gross--Stark unit associated to $g$. We complete the picture proposed by the Elliptic Stark Conjecture by providing a formula for the value $\mathcal{L}_p^g(\mathbf{f},\mathbf{g},\mathbf{h})(2,1,1)$ in the case where $L(f\otimes g\otimes h,1)\neq 0$. △ Less

Submitted 17 December, 2019; originally announced December 2019.

The Demonstration Model of the ATHENA X-IFU Cryogenic AntiCoincidence Detector

Authors: Matteo D'Andrea, Claudio Macculi, Guido Torrioli, Andrea Argan, Daniele Brienza, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Lorenzo Ferrari Barusso, Flavio Gatti, Manuela Rigano, Angela Volpe, Elia Stefano Battistelli

Abstract: The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an ac… ▽ More The Cryogenic AntiCoincidence Detector (CryoAC) of ATHENA X-IFU is designed to reduce the particle background of the instrument and to enable the mission science goals. It is a 4 pixel silicon microcalorimeter sensed by an Ir/Au TES network. We have developed the CryoAC Demonstration Model, a prototype aimed to probe the critical technologies of the detector, i.e. the suspended absorber with an active area of 1 cm2; the low energy threshold of 20 keV; and the operation connected to a 50 mK thermal bath with a power dissipation less than 40 nW. Here we report the test performed on the first CryoAC DM sample (namely the AC-S10 prototype), showing that it is fully compliant with its requirements. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-18 special issue

The laser-based time calibration system for the MEG II pixelated Timing Counter

Authors: G. Boca, P. W. Cattaneo, M. De Gerone, M. Francesconi, L. Galli, F. Gatti, J. Koga, M. Nakao, M. Nishimura, W. Ootani, M. Rossella, Y. Uchiyama, M. Usami, K. Yanai, K. Yoshida

Abstract: We have developed a new laser-based time calibration system for highly segmented scintillator counters like the MEG II pixelated Timing Counter (pTC), consisting of 512-centimeter scale scintillator counters read out by silicon photomultipliers (SiPMs). It is difficult to apply previous laser-based calibration methods for conventional meter-scale Time-Of-Flight detectors to the MEG II pTC from the… ▽ More We have developed a new laser-based time calibration system for highly segmented scintillator counters like the MEG II pixelated Timing Counter (pTC), consisting of 512-centimeter scale scintillator counters read out by silicon photomultipliers (SiPMs). It is difficult to apply previous laser-based calibration methods for conventional meter-scale Time-Of-Flight detectors to the MEG II pTC from the implementation and the accuracy points of view. This paper presents a new laser-based time calibration system which can overcome such difficulties. A laser pulse is split into each scintillator counter via several optical components so that we can directly measure the time offset of each counter relative to the laser-emitted time. We carefully tested all the components and procedures prior to the actual operation. The laser system was installed into the pTC and thoroughly tested under the real experimental condition. The system showed good stability and being sensitive to any change of timing larger than ~10 ps. Moreover, it showed an uncertainty of 48 ps in the determination of the time offsets, which meets our requirements. The new method provides an example of the implementation of a precise timing alignment for the new type of detectors enabled by the advance of SiPM technology. △ Less

Submitted 19 September, 2019; v1 submitted 1 July, 2019; originally announced July 2019.

Comments: 11 pages, 17 figures

Journal ref: Nuclear Inst. and Methods in Physics Research, A 947 (2019) 162672

A Laser-based Time Calibration System for the MEG II Timing Counter

Authors: M. Nakao, G. Boca, P. W. Cattaneo, M. De Gerone, F. Gatti, M. Nishimura, W. Ootani, M. Rossella, Y. Uchiyama, M. Usami, K. Yoshida

Abstract: We have developed a new laser-based time calibration system for the MEG II timing counter dedicated to timing measurement of positrons. The detector requires precise timing alignment between $\sim\,$500 scintillation counters. In this study, we present the calibration system which can directly measure the time offset of each counter relative to the laser-synchronized pulse. We thoroughly tested al… ▽ More We have developed a new laser-based time calibration system for the MEG II timing counter dedicated to timing measurement of positrons. The detector requires precise timing alignment between $\sim\,$500 scintillation counters. In this study, we present the calibration system which can directly measure the time offset of each counter relative to the laser-synchronized pulse. We thoroughly tested all the optical components and the uncertainty of this method is estimated to be 24 ps. In 2017, we installed the full system into the MEG II environment and performed a commissioning run. This method shows excellent stability and consistency with another method. The proposed system provides a precise timing alignment for SiPM-based timing detectors. It also has potential in areas such as TOF-PET. △ Less

Submitted 15 May, 2019; originally announced May 2019.

Comments: 3 pages, 3 figures, proceedings of the 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference

On the elliptic Stark conjecture in higher weight

Authors: Francesca Gatti, Xavier Guitart

Abstract: We study the special values of the triple product $p$-adic $L$-function constructed by Darmon and Rotger at all classical points outside the region of interpolation. We propose conjectural formulas for these values that can be seen as extending the Elliptic Stark Conjecture, and we provide theoretical evidence for them by proving some particular cases. We study the special values of the triple product $p$-adic $L$-function constructed by Darmon and Rotger at all classical points outside the region of interpolation. We propose conjectural formulas for these values that can be seen as extending the Elliptic Stark Conjecture, and we provide theoretical evidence for them by proving some particular cases. △ Less

Submitted 7 March, 2019; v1 submitted 6 March, 2019; originally announced March 2019.

Comments: Corrected some typographical errors and some references

Neutrino physics with the PTOLEMY project: active neutrino properties and the light sterile case

Authors: PTOLEMY collaboration, M. G. Betti, M. Biasotti, A. Boscá, F. Calle, G. Cavoto, C. Chang, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, N. De Groot, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, I. García-Cortés, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. E. Gudmundsson, Y. Hochberg , et al. (32 additional authors not shown)

Abstract: The PTOLEMY project aims to develop a scalable design for a Cosmic Neutrino Background (CNB) detector, the first of its kind and the only one conceived that can look directly at the image of the Universe encoded in neutrino background produced in the first second after the Big Bang. The scope of the work for the next three years is to complete the conceptual design of this detector and to validate… ▽ More The PTOLEMY project aims to develop a scalable design for a Cosmic Neutrino Background (CNB) detector, the first of its kind and the only one conceived that can look directly at the image of the Universe encoded in neutrino background produced in the first second after the Big Bang. The scope of the work for the next three years is to complete the conceptual design of this detector and to validate with direct measurements that the non-neutrino backgrounds are below the expected cosmological signal. In this paper we discuss in details the theoretical aspects of the experiment and its physics goals. In particular, we mainly address three issues. First we discuss the sensitivity of PTOLEMY to the standard neutrino mass scale. We then study the perspectives of the experiment to detect the CNB via neutrino capture on tritium as a function of the neutrino mass scale and the energy resolution of the apparatus. Finally, we consider an extra sterile neutrino with mass in the eV range, coupled to the active states via oscillations, which has been advocated in view of neutrino oscillation anomalies. This extra state would contribute to the tritium decay spectrum, and its properties, mass and mixing angle, could be studied by analyzing the features in the beta decay electron spectrum. △ Less

Submitted 30 September, 2019; v1 submitted 14 February, 2019; originally announced February 2019.

Comments: Typos corrected; Matches version accepted by JCAP

Journal ref: JCAP 07 (2019) 047

A Design for an Electromagnetic Filter for Precision Energy Measurements at the Tritium Endpoint

Authors: M. G. Betti, M. Biasotti, A. Bosca, F. Calle, J. Carabe-Lopez, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. Gudmundsson, Y. Hochberg, Y. Kahn , et al. (26 additional authors not shown)

Abstract: We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential alon… ▽ More We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential along the mid-plane of the filter. As a function of drift distance along the length of the filter, the filter zooms in with exponentially increasing precision on the transverse velocity component of the electron kinetic energy. This yields a linear dimension for the total filter length that is exceptionally compact compared to previous techniques for electromagnetic filtering. The parallel velocity component of the electron kinetic energy oscillates in an electrostatic harmonic trap as the electron drifts along the length of the filter. An analysis of the phase-space volume conservation validates the expected behavior of the filter from the adiabatic invariance of the orbital magnetic moment and energy conservation following Liouville's theorem for Hamiltonian systems. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Results from Pilot Run for MEG II Positron Timing Counter

Authors: M. Nakao, A. De Bari, M. Biasotti, G. Boca, P. W. Cattaneo, M. Francesconi, M. De Gerone, L. Galli, F. Gatti, A. Mtchedilishvili, D. Nicol, M. Nishimura, W. Ootani, S. Ritt, M. Rossella, M. Simonetta, Y. Uchiyama, M. Usami

Abstract: The MEG II experiment at Paul Scherrer Institut in Switzerland will search for the lepton flavour violating muon decay, $μ^+\to e^+γ$, with a sensitivity of $4\times10^{-14}$ improving the existing limit of an order of magnitude. In 2016, we finished the construction of the MEG II Timing Counter, the subdetector dedicated to the measurement of the positron emission time. The first one-fourth of it… ▽ More The MEG II experiment at Paul Scherrer Institut in Switzerland will search for the lepton flavour violating muon decay, $μ^+\to e^+γ$, with a sensitivity of $4\times10^{-14}$ improving the existing limit of an order of magnitude. In 2016, we finished the construction of the MEG II Timing Counter, the subdetector dedicated to the measurement of the positron emission time. The first one-fourth of it was installed in the experimental area and we performed a pilot run with the MEG~II beam of $7\times10^{7}μ^+/$s. The timing resolution reached the design value improving by a factor of two compared to MEG. △ Less

Submitted 22 August, 2018; originally announced August 2018.

Comments: 4 pages, 2 figures

Journal ref: Springer Proc. Phys. 213 (2018) 237-241

PTOLEMY: A Proposal for Thermal Relic Detection of Massive Neutrinos and Directional Detection of MeV Dark Matter

Authors: E. Baracchini, M. G. Betti, M. Biasotti, A. Bosca, F. Calle, J. Carabe-Lopez, G. Cavoto, C. Chang, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. Gudmundsson, Y. Hochberg, Y. Kahn , et al. (26 additional authors not shown)

Abstract: We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphen… ▽ More We propose to achieve the proof-of-principle of the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Each of the technological challenges described in [1,2] will be targeted and hopefully solved by the use of the latest experimental developments and profiting from the low background environment provided by the LNGS underground site. The first phase will focus on the graphene technology for a tritium target and the demonstration of TES microcalorimetry with an energy resolution of better than 0.05 eV for low energy electrons. These technologies will be evaluated using the PTOLEMY prototype, proposed for underground installation, using precision HV controls to step down the kinematic energy of endpoint electrons to match the calorimeter dynamic range and rate capabilities. The second phase will produce a novel implementation of the EM filter that is scalable to the full target size and which demonstrates intrinsic triggering capability for selecting endpoint electrons. Concurrent with the CNB program, we plan to exploit and develop the unique properties of graphene to implement an intermediate program for direct directional detection of MeV dark matter [3,4]. This program will evaluate the radio-purity and scalability of the graphene fabrication process with the goal of using recently identified ultra-high radio-purity CO2 sources. The direct detection of the CNB is a snapshot of early universe dynamics recorded by the thermal relic neutrino yield taken at a time that predates the epochs of Big Bang Nucleosynthesis, the Cosmic Microwave Background and the recession of galaxies (Hubble Expansion). Big Bang neutrinos are believed to have a central role in the evolution of the Universe and a direct measurement with PTOLEMY will unequivocally establish the extent to which these predictions match present-day neutrino densities. △ Less

Submitted 6 August, 2018; originally announced August 2018.

Status of the HOLMES Experiment to Directly Measure the Neutrino Mass

Authors: A. Nucciotti, B. Alpert, M. Balata, D. BeckerD. Bennett, A. Bevilacqua, M. Biasotti, V. Ceriale, G. Ceruti, D. Corsini, M. De Gerone, R. Dressler, M. Faverzani, E. Ferri, J. Fowler, G. Gallucci, J. Gard, F. Gatti, A. Giachero, J. Hays-Wehle, S. Heinitz, G. Hilton, U. Köster, M. Lusignoli, J. Mates, S. Nisi , et al. (13 additional authors not shown)

Abstract: The assessment of neutrino absolute mass scale is still a crucial challenge in today particle physics and cosmology. Beta or electron capture spectrum end-point study is currently the only experimental method which can provide a model independent measurement of the absolute scale of neutrino mass. HOLMES is an experiment funded by the European Research Council to directly measure the neutrino mass… ▽ More The assessment of neutrino absolute mass scale is still a crucial challenge in today particle physics and cosmology. Beta or electron capture spectrum end-point study is currently the only experimental method which can provide a model independent measurement of the absolute scale of neutrino mass. HOLMES is an experiment funded by the European Research Council to directly measure the neutrino mass. HOLMES will perform a calorimetric measurement of the energy released in the electron capture decay of the artificial isotope $^{163}$Ho. In a calorimetric measurement the energy released in the decay process is entirely contained into the detector, except for the fraction taken away by the neutrino. This approach eliminates both the issues related to the use of an external source and the systematic uncertainties arising from decays on excited final states. The most suitable detectors for this type of measurement are low temperature thermal detectors, where all the energy released into an absorber is converted into a temperature increase that can be measured by a sensitive thermometer directly coupled with the absorber. This measurement was originally proposed in 1982 by A. De Rujula and M. Lusignoli, but only in the last decade the technological progress in detectors development has allowed to design a sensitive experiment. HOLMES plans to deploy a large array of low temperature microcalorimeters with implanted $^{163}$Ho nuclei. In this contribution we outline the HOLMES project with its physics reach and technical challenges, along with its status and perspectives. △ Less

Submitted 24 July, 2018; originally announced July 2018.

Comments: This is a pre-print of an article published in Journal of Low Temperature Physics. The final authenticated version is available online at: https://doi.org/10.1007/s10909-018-2025-x

Journal ref: Nucciotti, A., Alpert, B., Balata, M. et al. J Low Temp Phys (2018)

The Cryogenic AntiCoincidence detector for ATHENA X-IFU: improvement of the test setup towards the Demonstration Model

Authors: Matteo D'Andrea, Claudio Macculi, Andrea Argan, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Dario Corsini, Flavio Gatti, Guido Torrioli, Angela Volpe

Abstract: The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now develo** the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the… ▽ More The ATHENA X-IFU development program foresees to build and characterize an instrument Demonstration Model (DM), in order to probe the system critical technologies before the mission adoption. In this respect, we are now develo** the DM of the X-IFU Cryogenic Anticoincidence Detector (CryoAC), which will be delivered to the Focal Plane Assembly (FPA) development team for the integration with the TES array. Before the delivery, we will characterize and test the CryoAC DM in our CryoLab at INAF/IAPS. In this paper we report the main results of the activities performed to improve our cryogenic test setup, making it suitable for the DM integration. These activities mainly consist in the development of a mechanichal setup and a cryogenic magnetic shielding system, whose effectiveness has been assessed by FEM simulations and a measurement at warm. The preliminary performance test has been performed by means of the last CryoAC single pixel prototype, the AC-S8 pre-DM sample. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-17 special issue

The Cryogenic AntiCoincidence detector for ATHENA X-IFU: assessing the role of the athermal phonons collectors in the AC-S8 prototype

Authors: Matteo D'Andrea, Claudio Macculi, Andrea Argan, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Dario Corsini, Flavio Gatti, Guido Torrioli

Abstract: The ATHENA X-ray Observatory is the second large-class mission in the ESA Cosmic Vision 2015-2025 science programme. One of the two on-board instruments is the X-IFU, an imaging spectrometer based on a large array of TES microcalorimeters. To reduce the particle-induced background, the spectrometer works in combination with a Cryogenic Anticoincidence detector (CryoAC), placed less than 1 mm below… ▽ More The ATHENA X-ray Observatory is the second large-class mission in the ESA Cosmic Vision 2015-2025 science programme. One of the two on-board instruments is the X-IFU, an imaging spectrometer based on a large array of TES microcalorimeters. To reduce the particle-induced background, the spectrometer works in combination with a Cryogenic Anticoincidence detector (CryoAC), placed less than 1 mm below the TES array. The last CryoAC single-pixel prototypes, namely AC-S7 and AC-S8, are based on large area (1 cm2) Silicon absorbers sensed by 65 parallel-connected iridium TES. This design has been adopted to improve the response generated by the athermal phonons, which will be used as fast anticoincidence flag. The latter sample is featured also with a network of Aluminum fingers directly connected to the TES, designed to further improve the athermals collection efficiency. In this paper we will report the main results obtained with AC-S8, showing that the additional fingers network is able to increase the energy collected from the athermal part of the pulses (from the 6% of AC-S7 up to the 26 % with AC-S8). Furthermore, the finger design is able to prevent the quasiparticle recombination in the aluminum, assuring a fast pulse rising front (L/R limited). In our road map, the AC-S8 prototype is the last step before the development of the CryoAC Demonstration Model (DM), which will be the detector able to demonstrate the critical technologies expected in the CryoAC development programme. △ Less

Submitted 23 July, 2018; originally announced July 2018.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-17 special issue

The Athena X-ray Integral Field Unit

Authors: Didier Barret, Thien Lam Trong, Jan-Willem den Herder, Luigi Piro, Massimo Cappi, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Kazuhisa Mitsuda, Stéphane Paltani, Gregor Rauw, Agata Rozanska, Joern Wilms, Simon Bandler, Marco Barbera, Xavier Barcons, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Elisa Costantini, Anne Decourchelle, Roland den Hartog, Lionel Duband, Jean-Marc Duval, Fabrizio Fiore , et al. (78 additional authors not shown)

Abstract: The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at… ▽ More The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at about 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 microns. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of about 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a 3He sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (>50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018. △ Less

Submitted 16 July, 2018; originally announced July 2018.

Comments: 15 pages, 5 figures, to appear in Proc. SPIE Astronomical Telescopes and Instrumentation, Austin 2018

The Cryogenic Anticoincidence Detector for ATHENA X-IFU: Preliminary test of AC-S9 towards the Demonstration Model

Authors: Matteo D'Andrea, Claudio Macculi, Andrea Argan, Simone Lotti, Gabriele Minervini, Luigi Piro, Michele Biasotti, Valentina Ceriale, Giovanni Gallucci, Flavio Gatti, Guido Torrioli, Angela Volpe

Abstract: Our team is develo** the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bat… ▽ More Our team is develo** the Cryogenic Anticoincidence Detector (CryoAC) of the ATHENA X-ray Integral Field Unit (X-IFU). It is a 4-pixels TES-based detector, which will be placed less than 1 mm below the main TES array detector. We are now producing the CryoAC Demonstration Model (DM): a single pixel prototype able to probe the detector critical technologies, i.e. the operation at 50 mK thermal bath, the threshold energy at 20 keV and the reproducibility of the thermal conductance between the suspended absorber and the thermal bath. This detector will be integrated and tested in our cryogenic setup at INAF/IAPS, and then delivered to SRON for the integration in the X-IFU Focal Plane Assemby (FPA) DM. In this paper we report the status of the CryoAC DM development, showing the main result obtained with the last developed prototype, namely AC-S9. This is a DM-like sample, which we have preliminary integrated and tested before performing the final etching process to suspend the silicon absorber. The results are promising for the DM, since despite the limitations due to the absence of the final etching (high thermal capacity, high thermal conductance, partial TES surface coverage), we have been able to operate the detector with TB = 50 mK and to detect 6 keV photons, thus having a low energy threshold fully compatible with our requirement (20 keV). △ Less

Submitted 11 July, 2018; v1 submitted 6 July, 2018; originally announced July 2018.

Comments: Proceeding of the SPIE Astronomical Telescopes + Instrumentation 2018

The design of the MEG II experiment

Authors: A. M. Baldini, E. Baracchini, C. Bemporad, F. Berg, M. Biasotti, G. Boca, P. W. Cattaneo, G. Cavoto, F. Cei, M. Chiappini, G. Chiarello, C. Chiri, G. Cocciolo, A. Corvaglia, A. de Bari, M. De Gerone, A. D'Onofrio, M. Francesconi, Y. Fujii, L. Galli, F. Gatti, F. Grancagnolo, M. Grassi, D. N. Grigoriev, M. Hildebrandt , et al. (55 additional authors not shown)

Abstract: The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation… ▽ More The MEG experiment, designed to search for the mu+->e+ gamma decay at a 10^-13 sensitivity level, completed data taking in 2013. In order to increase the sensitivity reach of the experiment by an order of magnitude to the level of 6 x 10-14 for the branching ratio, a total upgrade, involving substantial changes to the experiment, has been undertaken, known as MEG II. We present both the motivation for the upgrade and a detailed overview of the design of the experiment and of the expected detector performance. △ Less

Submitted 15 January, 2018; originally announced January 2018.

Comments: 61 pages and 97 figures

Journal ref: Eur. Phys. J. C 78 (380) (2018)

Upgrade of compact neutron spectrometer for high flux environments

Authors: M. Osipenko, A. Bellucci, V. Ceriale, D. Corsini, G. Gariano, F. Gatti, M. Girolami, S. Minutoli, F. Panza, M. Pillon, M. Ripani, D. M. Trucchi

Abstract: In this paper a new version of Li6-based neutron spectrometer for high flux environments is described. The new spectrometer was built with commercial single crystal Chemical Vapour Deposition diamonds of electronic grade. These crystals feature better charge collection as well as higher radiation hardness. Ohmic metal contacts were deposited on the diamonds suppressing build-up of space charge obs… ▽ More In this paper a new version of Li6-based neutron spectrometer for high flux environments is described. The new spectrometer was built with commercial single crystal Chemical Vapour Deposition diamonds of electronic grade. These crystals feature better charge collection as well as higher radiation hardness. Ohmic metal contacts were deposited on the diamonds suppressing build-up of space charge observed in the previous prototypes. New passive preamplification of signal at detector side was implemented to improve the resolution. This preamplification is based on RF transformer not sensitive to high neutron flux. Compact mechanical design allowed to reduce detector size to a tube of 1 cm diameter and 13 cm long. The spectrometer was tested in thermal column of TRIGA reactor and at DD neutron generator. The test results indicate an energy resolution of 72 keV (RMS) and coincidence timing resolution of 68 ps (RMS). The measured data are in agreement with Geant4 simulations except for larger energy loss tail presumably related to imperfections of metal contacts and glue expansion. △ Less

Submitted 18 July, 2017; originally announced July 2017.

Comments: 18 pages, 10 figures

The Cryogenic AntiCoincidence detector for ATHENA X-IFU: a scientific assessment of the observational capabilities in the hard X-ray band

Authors: Matteo D'Andrea, Simone Lotti, Claudio Macculi, Luigi Piro, Andrea Argan, Flavio Gatti

Abstract: ATHENA is a large X-ray observatory, planned to be launched by ESA in 2028 towards an L2 orbit. One of the two instruments of the payload is the X-IFU: a cryogenic spectrometer based on a large array of TES microcalorimeters, able to perform integral field spectrography in the 0.2-12 keV band (2.5 eV FWHM at 6 keV). The X-IFU sensitivity is highly degraded by the particle background expected in th… ▽ More ATHENA is a large X-ray observatory, planned to be launched by ESA in 2028 towards an L2 orbit. One of the two instruments of the payload is the X-IFU: a cryogenic spectrometer based on a large array of TES microcalorimeters, able to perform integral field spectrography in the 0.2-12 keV band (2.5 eV FWHM at 6 keV). The X-IFU sensitivity is highly degraded by the particle background expected in the L2 orbit, which is induced by primary protons of both galactic and solar origin, and mostly by secondary electrons. To reduce the particle background level and enable the mission science goals, the instrument incorporates a Cryogenic AntiCoincidence detector (CryoAC). It is a 4 pixel TES based detector, placed <1 mm below the main array. In this paper we report a scientific assessment of the CryoAC observational capabilities in the hard X-ray band (E>10 keV). The aim of the study has been to understand if the present detector design can be improved in order to enlarge the X-IFU scientific capability on an energy band wider than the TES array. This is beyond the CryoAC baseline, being this instrument aimed to operate as anticoincidence particle detector and not conceived to perform X-ray observations. △ Less

Submitted 19 May, 2017; originally announced May 2017.

Comments: Accepted for publication on Experimental Astronomy

Attosecond electronic and nuclear quantum photodynamics of ozone monitored with time and angle resolved photoelectron spectra

Authors: P. Decleva, N. Quadri, A. Perveaux, D. Lauvergnat, F. Gatti, B. Lasorne, G. J. Halász, Á. Vibók

Abstract: Recently we reported a series of numerical simulations proving that it is possible in principle to create an electronic wave packet and subsequent electronic motion in a neutral molecule photoexcited by a UV pump pulse within a few femtoseconds. We considered the ozone molecule: for this system the electronic wave packet leads to a dissociation process. In the present work, we investigate more spe… ▽ More Recently we reported a series of numerical simulations proving that it is possible in principle to create an electronic wave packet and subsequent electronic motion in a neutral molecule photoexcited by a UV pump pulse within a few femtoseconds. We considered the ozone molecule: for this system the electronic wave packet leads to a dissociation process. In the present work, we investigate more specifically the time-resolved photoelectron angular distribution of the ozone molecule that provides a much more detailed description of the evolution of the electronic wave packet. We thus show that this experimental technique should be able to give access to observing in real time the creation of an electronic wave packet in a neutral molecule and its impact on a chemical process. △ Less

Submitted 21 October, 2016; originally announced October 2016.

Comments: Accepted in Scientific Report

The Athena X-ray Integral Field Unit (X-IFU)

Authors: Didier Barret, Thien Lam Trong, Jan-Willem den Herder, Luigi Piro, Xavier Barcons, Juhani Huovelin, Richard Kelley, J. Miguel Mas-Hesse, Kazuhisa Mitsuda, Stéphane Paltani, Gregor Rauw, Agata Rożanska, Joern Wilms, Marco Barbera, Enrico Bozzo, Maria Teresa Ceballos, Ivan Charles, Anne Decourchelle, Roland den Hartog, Jean-Marc Duval, Fabrizio Fiore, Flavio Gatti, Andrea Goldwurm, Brian Jackson, Peter Jonker , et al. (66 additional authors not shown)

Abstract: The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, d… ▽ More The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we briefly describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution). The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan. △ Less

Submitted 29 August, 2016; originally announced August 2016.

Comments: 41 pages, 18 Figures

Journal ref: Proc. SPIE. 9905, Space Telescopes and Instrumentation 2016: Ultraviolet to Gamma Ray, 99052F. (August 17, 2016)

Multi-mode TES bolometer optimization for the LSPE-SWIPE instrument

Authors: R. Gualtieri, E. S. Battistelli, A. Cruciani, P. de Bernardis, M. Biasotti, D. Corsini, F. Gatti, L. Lamagna, S. Masi

Abstract: In this paper we explore the possibility of using transition edge sensor (TES) detectors in multi-mode configuration in the focal plane of the Short Wavelength Instrument for the Polarization Explorer (SWIPE) of the balloon-borne polarimeter Large Scale Polarization Explorer (LSPE) for the Cosmic Microwave Background (CMB) polarization. This study is motivated by the fact that maximizing the sensi… ▽ More In this paper we explore the possibility of using transition edge sensor (TES) detectors in multi-mode configuration in the focal plane of the Short Wavelength Instrument for the Polarization Explorer (SWIPE) of the balloon-borne polarimeter Large Scale Polarization Explorer (LSPE) for the Cosmic Microwave Background (CMB) polarization. This study is motivated by the fact that maximizing the sensitivity of TES bolometers, under the augmented background due to the multi-mode design, requires a non trivial choice of detector parameters. We evaluate the best parameter combination taking into account scanning strategy, noise constraints, saturation power and operating temperature of the cryostat during the flight. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Comments: in Journal of Low Temperature Physics, 05 January 2016