Showing 1–38 of 38 results for author: Gatti, D

Simulating the economic impact of rationality through reinforcement learning and agent-based modelling

Authors: Simone Brusatin, Tommaso Padoan, Andrea Coletta, Domenico Delli Gatti, Aldo Glielmo

Abstract: Agent-based models (ABMs) are simulation models used in economics to overcome some of the limitations of traditional frameworks based on general equilibrium assumptions. However, agents within an ABM follow predetermined, not fully rational, behavioural rules which can be cumbersome to design and difficult to justify. Here we leverage multi-agent reinforcement learning (RL) to expand the capabilit… ▽ More Agent-based models (ABMs) are simulation models used in economics to overcome some of the limitations of traditional frameworks based on general equilibrium assumptions. However, agents within an ABM follow predetermined, not fully rational, behavioural rules which can be cumbersome to design and difficult to justify. Here we leverage multi-agent reinforcement learning (RL) to expand the capabilities of ABMs with the introduction of fully rational agents that learn their policy by interacting with the environment and maximising a reward function. Specifically, we propose a 'Rational macro ABM' (R-MABM) framework by extending a paradigmatic macro ABM from the economic literature. We show that gradually substituting ABM firms in the model with RL agents, trained to maximise profits, allows for a thorough study of the impact of rationality on the economy. We find that RL agents spontaneously learn three distinct strategies for maximising profits, with the optimal strategy depending on the level of market competition and rationality. We also find that RL agents with independent policies, and without the ability to communicate with each other, spontaneously learn to segregate into different strategic groups, thus increasing market power and overall profits. Finally, we find that a higher degree of rationality in the economy always improves the macroeconomic environment as measured by total output, depending on the specific rational policy, this can come at the cost of higher instability. Our R-MABM framework is general, it allows for stable multi-agent learning, and represents a principled and robust direction to extend existing economic simulators. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Comments: 8 pages, 4 figures

Turbulent drag reduction with streamwise travelling waves in the compressible regime

Authors: Federica Gattere, Massimo Zanolini, Davide Gatti, Matteo Bernardini, Maurizio Quadrio

Abstract: The ability of streamwise-travelling waves of spanwise velocity to reduce the turbulent skin friction drag is assessed in the compressible regime. Direct numerical simulations are carried out to compare drag reduction in subsonic, transonic and supersonic channel flows. Compressibility improves the benefits of the travelling waves, in a way that depends on the control parameters: drag reduction be… ▽ More The ability of streamwise-travelling waves of spanwise velocity to reduce the turbulent skin friction drag is assessed in the compressible regime. Direct numerical simulations are carried out to compare drag reduction in subsonic, transonic and supersonic channel flows. Compressibility improves the benefits of the travelling waves, in a way that depends on the control parameters: drag reduction becomes larger than the incompressible one for small frequencies and wavenumbers. However, the improvement depends on the specific procedure employed for comparison. When the Mach number is varied and, at the same time, wall friction is changed by the control, the bulk temperature in the flow can either evolve freely in time until the aerodynamic heating balances the heat flux at the walls, or be constrained such that a fixed percentage of kinetic energy is transformed into thermal energy. Physical arguments suggest that, in the present context, the latter approach should be preferred. Not only it provides a test condition in which the wall-normal temperature profile more realistically mimics that in an external flow, but also leads to a much better scaling of the results, over both the Mach number and the control parameters. Under this comparison, drag reduction is only marginally improved by compressibility. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: Submitted to J. Fluid Mech., 22 pages

A Stimulated Raman Loss spectrometer for metrological studies of quadrupole lines of hydrogen isotopologues

Authors: M. Lamperti, L. Rutkowski, D. Gatti, R. Gotti, L. Moretti, D. Polli, G. Cerullo, M. Marangoni

Abstract: We discuss layout and performance of a high-resolution Stimulated Raman Loss spectrometer that has been newly developed for accurate studies of spectral lineshapes and line center frequencies of hydrogen isotopologues and in general of Raman active transitions. Thanks to the frequency comb calibration of the detuning between pump and Stokes lasers and to an active alignment of the two beams, the f… ▽ More We discuss layout and performance of a high-resolution Stimulated Raman Loss spectrometer that has been newly developed for accurate studies of spectral lineshapes and line center frequencies of hydrogen isotopologues and in general of Raman active transitions. Thanks to the frequency comb calibration of the detuning between pump and Stokes lasers and to an active alignment of the two beams, the frequency accuracy is well below 100 kHz. Over the vertical axis the spectrometer benefits from shot-noise limited detection, signal enhancement via multipass cell, active flattening of the spectral baseline and measurement times of few seconds over spectral spans larger than 10 GHz. Under these conditions an efficient averaging of Raman spectra is possible over long measurement times with minimal distortion of spectral lineshapes. By changing the pump laser, transitions can be covered in a very broad frequency span, from 50 to 5000 $\mathrm{cm^{-1}}$, including both vibrational and rotational bands. The spectrometer has been developed for studies of fundamental and collisional physics of hydrogen isotopologues and has been recently applied to the metrology of the Q(1) 1-0 line of $\mathrm{H_2}$. △ Less

Submitted 6 March, 2023; originally announced March 2023.

Journal ref: Molecular Physics (2023)

Reinforcement Learning for Combining Search Methods in the Calibration of Economic ABMs

Authors: Aldo Glielmo, Marco Favorito, Debmallya Chanda, Domenico Delli Gatti

Abstract: Calibrating agent-based models (ABMs) in economics and finance typically involves a derivative-free search in a very large parameter space. In this work, we benchmark a number of search methods in the calibration of a well-known macroeconomic ABM on real data, and further assess the performance of "mixed strategies" made by combining different methods. We find that methods based on random-forest s… ▽ More Calibrating agent-based models (ABMs) in economics and finance typically involves a derivative-free search in a very large parameter space. In this work, we benchmark a number of search methods in the calibration of a well-known macroeconomic ABM on real data, and further assess the performance of "mixed strategies" made by combining different methods. We find that methods based on random-forest surrogates are particularly efficient, and that combining search methods generally increases performance since the biases of any single method are mitigated. Moving from these observations, we propose a reinforcement learning (RL) scheme to automatically select and combine search methods on-the-fly during a calibration run. The RL agent keeps exploiting a specific method only as long as this keeps performing well, but explores new strategies when the specific method reaches a performance plateau. The resulting RL search scheme outperforms any other method or method combination tested, and does not rely on any prior information or trial and error procedure. △ Less

Submitted 7 December, 2023; v1 submitted 23 February, 2023; originally announced February 2023.

Comments: 9 pages and 5 figures, presented at the AAAI bridge program 'AI for Financial Institutions' (https://aaai23.bankit.art/), at the ICLR bridge program 'AI4ABM' (https://ai4abm.org/workshop_iclr2023/) and at ICAIF '23 (https://ai-finance.org/). Proceedings of the Fourth ACM International Conference on AI in Finance, (ICAIF 23), Association for Computing Machinery, New York, NY, USA

ACM Class: J.4; I.6.3

High-Resolution Spectroscopy in the 11.6-15 μm Range by a Quasi-cw Difference-Frequency-Generation Laser Source

Authors: Ali Elkhazraji, Mohammad Khaled Shakfa, Marco Lamperti, Khaiyom Hakimov, Khalil Djebbi, Riccardo Gotti, Davide Gatti, Marco Marangoni, Aamir Farooq

Abstract: We report an approach for high-resolution spectroscopy using a widely tunable laser emitting in the molecular fingerprint region. The laser is based on difference-frequency generation (DFG) in a nonlinear orientation-patterned GaAs crystal. The signal laser, a CO2 gas laser, is operated in a kHz-pulsed mode while the pump laser, an external-cavity quantum cascade laser, is finely mode-hop-free tun… ▽ More We report an approach for high-resolution spectroscopy using a widely tunable laser emitting in the molecular fingerprint region. The laser is based on difference-frequency generation (DFG) in a nonlinear orientation-patterned GaAs crystal. The signal laser, a CO2 gas laser, is operated in a kHz-pulsed mode while the pump laser, an external-cavity quantum cascade laser, is finely mode-hop-free tuned. The idler radiation covers a spectral range of 11.6 - 15 μm with a laser linewidth of 2.3 MHz. We showcase the versatility and the potential for molecular fingerprinting of the developed DFG laser source by resolving the absorption features of a mixture of several species in the long-wavelength mid-infrared. Furthermore, exploiting the wide tunability and resolution of the spectrometer, we resolve the broadband absorption spectrum of ethylene (C2H4) over 13 - 14.2 μm and quantify the self-broadening coefficients of some selected spectral lines. △ Less

Submitted 18 December, 2022; originally announced December 2022.

Coherent near-wall structures and drag reduction by spanwise forcing

Authors: Emanuele Gallorini, Maurizio Quadrio, Davide Gatti

Abstract: The effect of streamwise-traveling waves of spanwise wall velocity (StTW) on the quasi-streamwise vortices (QSV) populating the near-wall region of turbulent channels is studied via a conditional averaging technique applied to flow snapshots obtained via Direct Numerical Simulation. The analysis by A. Yakeno, Y. Hasegawa, N. Kasagi, "Modification of quasi-streamwise vortical structure in a drag-re… ▽ More The effect of streamwise-traveling waves of spanwise wall velocity (StTW) on the quasi-streamwise vortices (QSV) populating the near-wall region of turbulent channels is studied via a conditional averaging technique applied to flow snapshots obtained via Direct Numerical Simulation. The analysis by A. Yakeno, Y. Hasegawa, N. Kasagi, "Modification of quasi-streamwise vortical structure in a drag-reduced turbulent channel flow with spanwise wall oscillation", Phys. Fluids 26, 085109 (2014), where the special case of spatially uniform wall oscillation (OW) was considered, is extended to the general case of StTW, which yield both reduction and increase of turbulent skin-friction drag. StTW are found to significantly impact the wall-normal distribution of the vortex population. The conditionally averaged velocity field around the vortices shows that the contributions of the QSV to the quadrant Reynolds shear stresses change significantly during the control cycle. On the one hand, as for OW, the suppression of Q2 events (with upwelling of low-speed fluid away from the wall) dominates the drag-reduction process. On the other, the enhancement of Q2 and also Q4 events (with downwelling of high-speed fluid toward the wall) is related to drag increase. Based on the link identified between the phase changes of the Reynolds stresses and the principal directions of the rate-of-strain tensor induced by the StTW, a predictive correlation for drag reduction by StTW is proposed which uses physically significant parameters to overcome the shortcomings of existing models. △ Less

Submitted 21 August, 2022; originally announced August 2022.

Comments: 17 pages, 13 figures

Structure of turbulence in the flow around a rectangular cylinder

Authors: Alessandro Chiarini, Davide Gatti, Andrea Cimarelli, Maurizio Quadrio

Abstract: The separating and reattaching turbulent flow past a rectangular cylinder is studied to describe how small and large scales contribute to the sustaining mechanism of the velocity fluctuations. The work is based on the Anisotropic Generalised Kolmogorov Equations (AGKE), exact budget equations for the second-order structure function tensor in the space of scales and in the physical space. Scale-spa… ▽ More The separating and reattaching turbulent flow past a rectangular cylinder is studied to describe how small and large scales contribute to the sustaining mechanism of the velocity fluctuations. The work is based on the Anisotropic Generalised Kolmogorov Equations (AGKE), exact budget equations for the second-order structure function tensor in the space of scales and in the physical space. Scale-space energy fluxes show that forward and reverse energy transfers simultaneously occur in the flow, with interesting modelling implications. Over the longitudinal cylinder side, the Kelvin-Helmholtz instability of the leading-edge shear layer generates large spanwise rolls, which get stretched into hairpin-like vortices and eventually break down into smaller streamwise vortices. Independent sources of velocity fluctuations act at different scales. The flow dynamics is dominated by pressure-strain: the flow im**ement on the cylinder surface in the reattachment zone produces spanwise velocity fluctuations very close to the wall and, at larger wall distances, reorients them to feed streamwise-aligned vortices. In the near wake, large von Kàrmàn-like vortices are shed from the trailing edge and coexist with smaller turbulent structures, each with its own independent production mechanism. At the trailing edge, the sudden disappearance of the wall changes the structure of turbulence: streamwise vortices progressively vanish, while spanwise structures close to the wall are suddenly turned into vertical fluctuations by the pressure strain. △ Less

Submitted 12 July, 2022; originally announced July 2022.

Stimulated-Raman-Scattering Metrology

Authors: M. Lamperti, L. Rutkowski, D. Ronchetti, D. Gatti, R. Gotti, G. Cerullo, F. Thibault, H. Jóźwiak, S. Wójtewicz, P. Masłowski, P. Wcisło, D. Polli, M. Marangoni

Abstract: Frequency combs have revolutionized optical frequency metrology, allowing one to determine highly accurate transition frequencies of a wealth of molecular species. Despite a recognized scientific interest, these progresses have only marginally benefited infrared-inactive transitions, due to their inherently weak cross-sections. Here we overcome this limitation by introducing stimulated-Raman-scatt… ▽ More Frequency combs have revolutionized optical frequency metrology, allowing one to determine highly accurate transition frequencies of a wealth of molecular species. Despite a recognized scientific interest, these progresses have only marginally benefited infrared-inactive transitions, due to their inherently weak cross-sections. Here we overcome this limitation by introducing stimulated-Raman-scattering metrology, where a frequency comb is exploited to calibrate the frequency detuning between the pump and Stokes excitation lasers. We apply this approach to molecular hydrogen to test quantum electrodynamics. We measure the transition frequency of the Q(1) fundamental line of H$_2$ around 4155 cm$^{-1}$ with few parts-per-billion uncertainty, which is comparable to the theoretical benchmark of ab initio calculations and more than a decade better than the experimental state of the art. Our comb-calibrated stimulated Raman scattering spectrometer extends the toolkit of optical frequency metrology as it can be applied, with simple technical changes, to many other infrared-inactive transitions, over a 50-5000 cm$^{-1}$ range that covers also purely rotational bands. △ Less

Submitted 8 July, 2022; originally announced July 2022.

Journal ref: Commun Phys 6, 67 (2023)

Molecular dynamics without molecules: searching the conformational space of proteins with generative neural networks

Authors: Gregory Schwing, Luigi L. Palese, Ariel Fernández, Loren Schwiebert, Domenico L. Gatti

Abstract: All-atom and coarse-grained molecular dynamics are two widely used computational tools to study the conformational states of proteins. Yet, these two simulation methods suffer from the fact that without access to supercomputing resources, the time and length scales at which these states become detectable are difficult to achieve. One alternative to such methods is based on encoding the atomistic t… ▽ More All-atom and coarse-grained molecular dynamics are two widely used computational tools to study the conformational states of proteins. Yet, these two simulation methods suffer from the fact that without access to supercomputing resources, the time and length scales at which these states become detectable are difficult to achieve. One alternative to such methods is based on encoding the atomistic trajectory of molecular dynamics as a shorthand version devoid of physical particles, and then learning to propagate the encoded trajectory through the use of artificial intelligence. Here we show that a simple textual representation of the frames of molecular dynamics trajectories as vectors of Ramachandran basin classes retains most of the structural information of the full atomistic representation of a protein in each frame, and can be used to generate equivalent atom-less trajectories suitable to train different types of generative neural networks. In turn, the trained generative models can be used to extend indefinitely the atom-less dynamics or to sample the conformational space of proteins from their representation in the models latent space. We define intuitively this methodology as molecular dynamics without molecules, and show that it enables to cover physically relevant states of proteins that are difficult to access with traditional molecular dynamics. △ Less

Submitted 8 June, 2022; originally announced June 2022.

Comments: 12 pages, 9 figures, 3 tables

Drag reduction on a transonic airfoil

Authors: Maurizio Quadrio, Alessandro Chiarini, Jacopo Banchetti, Davide Gatti, Antonio Memmolo, Sergio Pirozzoli

Abstract: Flow control for turbulent skin-friction drag reduction is applied to a transonic airfoil to improve its aerodynamic performance. The study is based on direct numerical simulations (with up to 1.8 billions cells) of the compressible turbulent flow around a supercritical airfoil, at Reynolds and Mach numbers of $Re_\infty= 3 \times 10^5$ and $M_\infty =0.7$. Control via spanwise forcing is applied… ▽ More Flow control for turbulent skin-friction drag reduction is applied to a transonic airfoil to improve its aerodynamic performance. The study is based on direct numerical simulations (with up to 1.8 billions cells) of the compressible turbulent flow around a supercritical airfoil, at Reynolds and Mach numbers of $Re_\infty= 3 \times 10^5$ and $M_\infty =0.7$. Control via spanwise forcing is applied over a fraction of the suction side of the airfoil. Besides locally reducing friction, the control modifies the shock wave and significantly improves the aerodynamic efficiency of the airfoil by increasing lift and decreasing drag. Hence, the airfoil can achieve the required lift at a lower angle of attack and with a lower drag. Estimates at the aircraft level indicate that substantial savings are possible; when control is active, its energy cost becomes negligible thanks to the small application area. We suggest that skin-friction drag reduction should be considered not only as a goal, but also as a tool to improve the global aerodynamics of complex flows. △ Less

Submitted 26 April, 2022; originally announced April 2022.

Measurement of the angular correlation between the two gamma rays emitted in the radioactive decays of a $^{60}$Co source with two NaI(Tl) scintillator

Authors: E. C. Amato, A. Anelli, M. Barbieri, D. Cataldi, V. Cellamare, D. Cerasole, F. Conserva, S. De Gaetano, D. Depalo, A. Digennaro, E. Fiorente, F. Gargano, D. Gatti, P. Loizzo, F. Loparco, O. Mele, N. Nicassio, G. Perfetto, R. Pillera, R. Pirlo, E. Schygulla, D. Troiano

Abstract: We implemented a didactic experiment to study the angular correlation between the two gamma rays emitted in typical $^{60}$Co radioactive decays. We used two NaI(Tl) scintillators, already available in our laboratory, and a low-activity $^{60}$Co source. The detectors were mounted on two rails, with the source at their center. The first rail was fixed, while the second could be rotated around the… ▽ More We implemented a didactic experiment to study the angular correlation between the two gamma rays emitted in typical $^{60}$Co radioactive decays. We used two NaI(Tl) scintillators, already available in our laboratory, and a low-activity $^{60}$Co source. The detectors were mounted on two rails, with the source at their center. The first rail was fixed, while the second could be rotated around the source. We performed several measurements by changing the angle between the two scintillators in the range from $90^\circ$ to $180^\circ$. Dedicated background runs were also performed, removing the source from the experimental setup. We found that the signal rate increases with the angular separation between the two scintillators, with small discrepancies from the theoretical expectations. △ Less

Submitted 13 January, 2022; originally announced January 2022.

Comments: 15 pages, 12 figures

Ascending-descending and direct-inverse cascades of Reynolds stresses in turbulent Couette flow

Authors: Alessandro Chiarini, Mariadebora Mauriello, Davide Gatti, Maurizio Quadrio

Abstract: The interaction between small- and large-scale structures, and the coexisting bottom-up and top-down processes are studied in a turbulent plane Couette flow, where space-filling longitudinal rolls appear at relatively low values of the Reynolds number $Re$. A DNS database at $Re_τ=101$ is built to replicate the highest $Re$ considered in a recent experimental work by Kawata and Alfredsson (Phys. R… ▽ More The interaction between small- and large-scale structures, and the coexisting bottom-up and top-down processes are studied in a turbulent plane Couette flow, where space-filling longitudinal rolls appear at relatively low values of the Reynolds number $Re$. A DNS database at $Re_τ=101$ is built to replicate the highest $Re$ considered in a recent experimental work by Kawata and Alfredsson (Phys. Rev. Lett., vol.120, 2018, 244501). Our study is based on the exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$, i.e. the Anisotropic Generalized Kolmogorov Equations (AGKE). The AGKE study production, redistribution, transport and dissipation of every Reynolds stress tensor component, considering simultaneously the physical space and the space of scales, and properly define the concept of scale in the inhomogeneous wall-normal direction. We show how the large-scale energy-containing motions are involved in the production and redistribution of the turbulent fluctuations. Both bottom-up and top-down interactions occur, and the same is true for direct and inverse cascading. The wall-parallel components $\langle δu δu \rangle$ and $\langle δw δw \rangle$ show that the both small and large near-wall scales feed the large scales away from the wall. The wall-normal component $\langle δv δv \rangle$ is different, and shows a dominant top-down dynamics, being produced via pressure-strain redistribution away from the wall and transferred towards near-wall larger scales via an inverse cascade. The off-diagonal component shows a top-down interaction, with both direct and inverse cascade, albeit the latter takes place within a limited range of scales. △ Less

Submitted 23 September, 2021; originally announced September 2021.

Effects of sweeps and ejections on amplitude modulation in a turbulent channel flow

Authors: A. Andreolli, D. Gatti, R. Vinuesa, R. Örlü, P. Schlatter

Abstract: Conditional averages are used to evaluate the effect of sweeps and ejections on amplitude modulation. This is done numerically with a direct numerical simulation (DNS) of a channel flow at friction Reynolds number $Re_τ = 1000$ in a minimal stream-wise unit (MSU). The amplitude-modulation map of such DNS is also compared to the one of a regular channel flow in a longer streamwise domain (LSD), in… ▽ More Conditional averages are used to evaluate the effect of sweeps and ejections on amplitude modulation. This is done numerically with a direct numerical simulation (DNS) of a channel flow at friction Reynolds number $Re_τ = 1000$ in a minimal stream-wise unit (MSU). The amplitude-modulation map of such DNS is also compared to the one of a regular channel flow in a longer streamwise domain (LSD), in order to assess its validity for this study. The cheaper MSU is found to provide a good representation of the modulation phenomena in the LSD. As for conditional averages, the amplitude-modulation coefficient is conditioned on the sign of the large-scale fluctuations. Care must be exerted in defining such a coefficient, as the conditioned large-scale fluctuation has non-zero average, indeed as a consequence of conditioning. Both sweeps and ejections (positive and negative large-scale fluctuation events) are found to have a positive contribution to amplitude modulation in the buffer layer, and a negative one in the outer layer. The negative-modulation region is found to shrink in case of ejections, so that the positive-modulation region extends farther away from the wall. Two more conditional statistics are used to provide an alternative representation of amplitude modulation and insights into the characteristics of the large-scale structures. △ Less

Submitted 20 September, 2021; originally announced September 2021.

Trip** and laminar--turbulent transition: Implementation in RANS--EVM

Authors: N. Tabatabaei, G. Fahland, A. Stroh, D. Gatti, B. Frohnapfel, M. Atzori, R. Vinuesa1, P. Schlatter

Abstract: Fundamental fluid--mechanics studies and many engineering developments are based on tripped cases. Therefore, it is essential for CFD simulations to replicate the same forced transition in spite of the availability of advanced transition modelling. In the last decade, both direct and large--eddy simulations (DNS and LES) include trip** methods in an effort to avoid the need for modeling the comp… ▽ More Fundamental fluid--mechanics studies and many engineering developments are based on tripped cases. Therefore, it is essential for CFD simulations to replicate the same forced transition in spite of the availability of advanced transition modelling. In the last decade, both direct and large--eddy simulations (DNS and LES) include trip** methods in an effort to avoid the need for modeling the complex mechanisms associated with the natural transition process, which we would like to bring over to Reynolds--averaged Navier--Stokes (RANS) turbulence models. This paper investigates the necessity and applications of numerical trip**, despite of the developments in numerical modeling of natural transition. The second goal of this paper is to assess a technique to implement trip** in eddy-viscosity models (EVM) for RANS. A recent approach of turbulence generation, denoted as turbulence-injection method (kI), is evaluated and investigated through different test cases ranging from a turbulent boundary layer on a flat plate to the three dimensional(3D) flow over a wing section. The desired trip** is achieved at the target location and the simulation results compare favorably with the reference results (DNS, LES and measured data). With the application of the model, the challenging transition region can be minimized in a simulation, and consequently more reliable results are obtained. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Global energy budgets in turbulent Couette and Poiseuille flows

Authors: Andrea Andreolli, Maurizio Quadrio, Davide Gatti

Abstract: Turbulent plane Poiseuille and Couette flows share the same geometry, but produce their flow rate owing to different external drivers, pressure gradient and shear respectively. By looking at integral energy fluxes, we pose and answer the question of which flow performs better at creating flow rate. We define a flow {\em efficiency}, that quantifies the fraction of power used to produce flow rate i… ▽ More Turbulent plane Poiseuille and Couette flows share the same geometry, but produce their flow rate owing to different external drivers, pressure gradient and shear respectively. By looking at integral energy fluxes, we pose and answer the question of which flow performs better at creating flow rate. We define a flow {\em efficiency}, that quantifies the fraction of power used to produce flow rate instead of being wasted as a turbulent overhead; {\em effectiveness}, instead, describes the amount of flow rate produced by a given power. The work by Gatti \emph{et al.} (\emph{J. Fluid Mech.} vol.857, 2018, pp. 345--373), where the constant power input (CPI) concept was developed to compare turbulent Poiseuille flows with drag reduction, is here extended to compare different flows. By decomposing the mean velocity field into a laminar contribution and a deviation, analytical expressions are derived which are the energy-flux equivalents of the FIK identity. These concepts are applied to literature data supplemented by a new set of direct numerical simulations, to find that Couette flows are less efficient but more effective than Poiseuille ones. The reason is traced to the more effective laminar component of Couette flows, which compensates for their higher turbulent activity. It is also observed that, when the fluctuating fields of the two flows are fed with the same total power fraction, Couette flows dissipate a smaller percentage of it via turbulent dissipation. A decomposition of the fluctuating field into large and small scales explains this feature: Couette flows develop stronger large-scale structures, which alter the mean flow while contributing less significantly to dissipation. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Journal ref: J. Fluid Mech. 924 (2021) A25

Decomposition of the mean friction drag on a NACA4412 airfoil under uniform blowing/suction

Authors: Yitong Fan, Marco Atzori, Ricardo Vinuesa, Davide Gatti, Philipp Schlatter, Weipeng Li

Abstract: The application of drag-control strategies on canonical wall-bounded turbulence, such as periodic channel and zero- or adverse-pressure-gradient boundary layers, raises the question of how to describe control effects consistently for different reference cases. We employ the RD identity (Renard & Deck, J. Fluid Mech., 790, 2016, pp. 339-367) to decompose the mean friction drag and investigate the c… ▽ More The application of drag-control strategies on canonical wall-bounded turbulence, such as periodic channel and zero- or adverse-pressure-gradient boundary layers, raises the question of how to describe control effects consistently for different reference cases. We employ the RD identity (Renard & Deck, J. Fluid Mech., 790, 2016, pp. 339-367) to decompose the mean friction drag and investigate the control effects of uniform blowing and suction applied to a NACA4412 airfoil at chord Reynolds numbers Re_c=200,000 and 400,000. The connection of the drag reduction/increase by using blowing/suction with the turbulence statistics (including viscous dissipation, turbulence-kinetic-energy production, and spatial growth of the flow) across the boundary layer, subjected to adverse or favorable pressure gradients, are examined. We found that the peaks of the statistics associated with the friction-drag generation exhibit good scaling in either inner or outer units throughout the boundary layer. They are also independent of the Reynolds number, control scheme, and intensity of the blowing/suction. The small- and large-scale structures are separated with an adaptive scale-decomposition method, i.e. empirical mode decomposition (EMD), aiming to analyze the scale-specific contribution of turbulent motions to friction-drag generation. Results unveil that blowing on the suction side of the airfoil is able to enhance the contribution of large-scale motions and to suppress that of small-scales; on the other hand, suction behaves contrarily. The contributions related to cross-scale interactions remain almost unchanged with different control strategies. △ Less

Submitted 7 June, 2021; originally announced June 2021.

Game Design for Blockchain Learning

Authors: Diogo Cortiz, Newton Calegari, Fabiana Oliveira, Daniel Couto Gatti

Abstract: Blockchain is a new technological approach that has gained popularity on the market due to its application in several areas such as education, health, security, and smart cities, among others. However, understanding how blockchain works is not easy at first, especially for non-technical people, because it relies on a non-trivial computational process. We have developed a game board - called Blockt… ▽ More Blockchain is a new technological approach that has gained popularity on the market due to its application in several areas such as education, health, security, and smart cities, among others. However, understanding how blockchain works is not easy at first, especially for non-technical people, because it relies on a non-trivial computational process. We have developed a game board - called Blocktrain - whose game mechanics are based on the blockchain processing model. This game gives people the opportunity to learn key blockchain concepts while playing. In this paper, we describe the game design process and assessment of the game as pedagogical instrument. △ Less

Submitted 14 April, 2021; originally announced April 2021.

Comments: Paper published in the II International Conference on Game, Game Art and Gamification

CXR-Net: An Artificial Intelligence Pipeline for Quick Covid-19 Screening of Chest X-Rays

Authors: Haikal Abdulah, Benjamin Huber, Sinan Lal, Hassan Abdallah, Luigi L. Palese, Hamid Soltanian-Zadeh, Domenico L. Gatti

Abstract: CXR-Net is a two-module Artificial Intelligence pipeline for the quick detection of SARS-CoV-2 from chest X-rays (CXRs). Module 1 was trained on a public dataset of 6395 CXRs with radiologist annotated lung contours to generate masks of the lungs that overlap the heart and large vasa. Module 2 is a hybrid convnet in which the first convolutional layer with learned coefficients is replaced by a lay… ▽ More CXR-Net is a two-module Artificial Intelligence pipeline for the quick detection of SARS-CoV-2 from chest X-rays (CXRs). Module 1 was trained on a public dataset of 6395 CXRs with radiologist annotated lung contours to generate masks of the lungs that overlap the heart and large vasa. Module 2 is a hybrid convnet in which the first convolutional layer with learned coefficients is replaced by a layer with fixed coefficients provided by the Wavelet Scattering Transform (WST). Module 2 takes as inputs the patients CXRs and corresponding lung masks calculated by Module 1, and produces as outputs a class assignment (Covid vs. non-Covid) and high resolution heat maps that identify the SARS associated lung regions. Module 2 was trained on a dataset of CXRs from non-Covid and RT-PCR confirmed Covid patients acquired at the Henry Ford Health System (HFHS) Hospital in Detroit. All non-Covid CXRs were from pre-Covid era (2018-2019), and included images from both normal lungs and lungs affected by non-Covid pathologies. Training and test sets consisted of 2265 CXRs (1417 Covid negative, 848 Covid positive), and 1532 CXRs (945 Covid negative, 587 Covid positive), respectively. Six distinct cross-validation models, each trained on 1887 images and validated against 378 images, were combined into an ensemble model that was used to classify the CXR images of the test set with resulting Accuracy = 0.789, Precision = 0.739, Recall = 0.693, F1 score = 0.715, ROC(AUC) = 0.852. △ Less

Submitted 26 February, 2021; originally announced March 2021.

Comments: 16 pages, 14 figures. arXiv admin note: substantial text overlap with arXiv:2011.08655

MSC Class: 68Txx (Primary); 68T07 (Secondary); 92B20; 68T45 ACM Class: I.2; I.4; I.5; J.3

Lung Segmentation in Chest X-rays with Res-CR-Net

Authors: Haikal Abdulah, Benjamin Huber, Sinan Lal, Hassan Abdallah, Hamid Soltanian-Zadeh, Domenico L. Gatti

Abstract: Deep Neural Networks (DNN) are widely used to carry out segmentation tasks in biomedical images. Most DNNs developed for this purpose are based on some variation of the encoder-decoder U-Net architecture. Here we show that Res-CR-Net, a new type of fully convolutional neural network, which was originally developed for the semantic segmentation of microscopy images, and which does not adopt a U-Net… ▽ More Deep Neural Networks (DNN) are widely used to carry out segmentation tasks in biomedical images. Most DNNs developed for this purpose are based on some variation of the encoder-decoder U-Net architecture. Here we show that Res-CR-Net, a new type of fully convolutional neural network, which was originally developed for the semantic segmentation of microscopy images, and which does not adopt a U-Net architecture, is very effective at segmenting the lung fields in chest X-rays from either healthy patients or patients with a variety of lung pathologies. △ Less

Submitted 13 November, 2020; originally announced November 2020.

Comments: 8 pages, 5 figures

MSC Class: 68Txx (Primary); 68T07 (Secondary); 92B20; 68T45 ACM Class: I.2; I.4; J.3

Bending modes metrology in the 14-15 $μ$m region

Authors: M. Lamperti, R. Gotti, D. Gatti, M. K. Shakfa, E. Cané, F. Tamassia, P. Schunemann, P. Laporta, A. Farooq, M. Marangoni

Abstract: Frequency combs have triggered an impressive evolution of optical metrology across diverse regions of the electromagnetic spectrum, from the ultraviolet to the terahertz frequencies. An unexplored territory, however, remains in the region of vibrational bending modes, mostly due to the lack of single-mode lasers in the long-wavelength (LW) part of the mid-infrared (MIR) spectrum. We fill this gap… ▽ More Frequency combs have triggered an impressive evolution of optical metrology across diverse regions of the electromagnetic spectrum, from the ultraviolet to the terahertz frequencies. An unexplored territory, however, remains in the region of vibrational bending modes, mostly due to the lack of single-mode lasers in the long-wavelength (LW) part of the mid-infrared (MIR) spectrum. We fill this gap through a purely MIR-based nonlinear laser source with tunability from 12.1 to 14.8 $μ$m, optical power up to 110 $μ$W, MHz-level linewidth and comb calibration. This enables the first example of bending modes metrology in this region, with the assessment of several CO$_2$-based frequency benchmarks with uncertainties down to 30 kHz, and the accurate study of the $ν_{11}$ band of benzene, which is a significant testbed for the resolution of the spectrometer. These achievements pave the way for LW-MIR metrology, rotationally-resolved studies and astronomic observations of large molecules, such as aromatic hydrocarbons. △ Less

Submitted 16 July, 2020; originally announced July 2020.

Comments: 36 pages including Supplementary Materials, 4 figures (paper), 3 figures (SM)

Journal ref: Commun Phys 3, 175 (2020)

Structure function tensor equations in inhomogeneous turbulence

Authors: Davide Gatti, Alessandro Chiarini, Andrea Cimarelli, Maurizio Quadrio

Abstract: Exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$ are used to study the two-point statistics of velocity fluctuations in inhomogeneous turbulence. The Anisotropic Generalized Kolmogorov Equations (AGKE) describe the production, transport, redistribution and dissipation of every Reynolds stress component occurring simultaneously among different scales… ▽ More Exact budget equations for the second-order structure function tensor $\langle δu_i δu_j \rangle$ are used to study the two-point statistics of velocity fluctuations in inhomogeneous turbulence. The Anisotropic Generalized Kolmogorov Equations (AGKE) describe the production, transport, redistribution and dissipation of every Reynolds stress component occurring simultaneously among different scales and in space, i.e. along directions of statistical inhomogeneity. The AGKE are effective to study the inter-component and multi-scale processes of turbulence. In contrast to more classic approaches, such as those based on the spectral decomposition of the velocity field, the AGKE provide a natural definition of scales in the inhomogeneous directions, and describe fluxes across such scales too. Compared to the Generalized Kolmogorov Equation, which is recovered as their half trace, the AGKE can describe inter-component energy transfers occurring via the pressure-strain term and contain also budget equations for the off-diagonal components of $\langle δu_i δu_j \rangle$. The non-trivial physical interpretation of the AGKE terms is demonstrated with three examples. First, the near-wall cycle of a turbulent channel flow at $Re_τ=200$ is considered. The off-diagonal component $\langle -δu δv \rangle$, which can not be interpreted in terms of scale energy, is discussed in detail. Wall-normal scales in the outer turbulence cycle are then discussed by applying the AGKE to channel flows at $Re_τ=500$ and $1000$. In a third example, the AGKE are computed for a separating and reattaching flow. The process of spanwise-vortex formation in the reverse boundary layer within the separation bubble is discussed for the first time. △ Less

Submitted 15 May, 2020; originally announced May 2020.

Journal ref: J. Fluid Mech. 898 (2020) A5

Res-CR-Net, a residual network with a novel architecture optimized for the semantic segmentation of microscopy images

Authors: Hassan Abdallah, Asiri Liyanaarachchi, Maranda Saigh, Samantha Silvers, Suzan Arslanturk, Douglas J. Taatjes, Lars Larsson, Bhanu P. Jena, Domenico L. Gatti

Abstract: Deep Neural Networks (DNN) have been widely used to carry out segmentation tasks in both electron and light microscopy. Most DNNs developed for this purpose are based on some variation of the encoder-decoder type U-Net architecture, in combination with residual blocks to increase ease of training and resilience to gradient degradation. Here we introduce Res-CR-Net, a type of DNN that features resi… ▽ More Deep Neural Networks (DNN) have been widely used to carry out segmentation tasks in both electron and light microscopy. Most DNNs developed for this purpose are based on some variation of the encoder-decoder type U-Net architecture, in combination with residual blocks to increase ease of training and resilience to gradient degradation. Here we introduce Res-CR-Net, a type of DNN that features residual blocks with either a bundle of separable atrous convolutions with different dilation rates or a convolutional LSTM. The number of filters used in each residual block and the number of blocks are the only hyperparameters that need to be modified in order to optimize the network training for a variety of different microscopy images. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Objective barriers to the transport of dynamically active vector fields

Authors: George Haller, Stergios Katsanoulis, Markus Holzner, Bettina Frohnapfel, Davide Gatti

Abstract: We derive a theory for material surfaces that maximally inhibit the diffusive transport of a dynamically active vector field, such as the linear momentum, the angular momentum or the vorticity, in general fluid flows. These special material surfaces (\emph{Lagrangian active barriers}) provide physics-based, observer-independent boundaries of dynamically active coherent structures. We find that Lag… ▽ More We derive a theory for material surfaces that maximally inhibit the diffusive transport of a dynamically active vector field, such as the linear momentum, the angular momentum or the vorticity, in general fluid flows. These special material surfaces (\emph{Lagrangian active barriers}) provide physics-based, observer-independent boundaries of dynamically active coherent structures. We find that Lagrangian active barriers evolve from invariant surfaces of an associated steady and incompressible \emph{barrier equation}, whose right-hand side is the time-averaged pullback of the viscous stress terms in the evolution equation for the dynamically active vector field. Instantaneous limits of these barriers mark objective \emph{Eulerian active barriers} to the short-term diffusive transport of the dynamically active vector field. We obtain that in unsteady Beltrami flows, Lagrangian and Eulerian active barriers coincide exactly with purely advective transport barriers bounding observed coherent structures. In more general flows, active barriers can be identified by applying Lagrangian coherent structure (LCS) diagnostics, such as the finite-time Lyapunov exponent and the polar rotation angle, to the appropriate active barrier equation. In comparison to their passive counterparts, these \emph{active LCS diagnostics} require no significant fluid particle separation and hence provide substantially higher-resolved Lagrangian and Eulerian coherent structure boundaries from temporally shorter velocity data sets. We illustrate these results and their physical interpretation on two-dimensional, homogeneous, isotropic turbulence and on a three-dimensional turbulent channel flow. △ Less

Submitted 1 September, 2020; v1 submitted 16 February, 2020; originally announced February 2020.

Comments: 50 pages, 40 figures, to be published in J. Fluid. Mech

Journal ref: J. Fluid Mech. 905 (2020) A17

Hemoglobin Non-equilibrium Oxygen Dissociation Curve

Authors: Rosella Scrima, Sabino Fugetto, Nazzareno Capitanio, Domenico L. Gatti

Abstract: Abnormal hemoglobins can have major consequences for tissue delivery of oxygen. Correct diagnosis of hemoglobinopathies with altered oxygen affinity requires a determination of hemoglobin oxygen dissociation curve (ODC), which relates the hemoglobin oxygen saturation to the partial pressure of oxygen in the blood. Determination of the ODC of human hemoglobin is typically carried out under conditio… ▽ More Abnormal hemoglobins can have major consequences for tissue delivery of oxygen. Correct diagnosis of hemoglobinopathies with altered oxygen affinity requires a determination of hemoglobin oxygen dissociation curve (ODC), which relates the hemoglobin oxygen saturation to the partial pressure of oxygen in the blood. Determination of the ODC of human hemoglobin is typically carried out under conditions in which hemoglobin is in equilibrium with O2 at each partial pressure. However, in the human body due to the fast transit of RBCs through tissues hemoglobin oxygen exchanges occur under non-equilibrium conditions. We describe the determination of non-equilibrium ODC, and show that under these conditions Hb cooperativity has two apparent components in the Adair, Perutz, and MWC models of Hb. The first component, which we call sequential cooperativity, accounts for ~70% of Hb cooperativity, and emerges from the constraint of sequential binding that is shared by the three models. The second component, which we call conformational cooperativity, accounts for ~30% of Hb cooperativity, and is due either to a conformational equilibrium between low affinity and high affinity tetramers (as in the MWC model), or to a conformational change from low to high affinity once two of the tetramer sites are occupied (Perutz model). △ Less

Submitted 31 December, 2019; originally announced January 2020.

ACM Class: I.6.5

An Efficient Numerical Method for the Generalised Kolmogorov Equation

Authors: Davide Gatti, Alberto Remigi, Alessandro Chiarini, Andrea Cimarelli, Maurizio Quadrio

Abstract: An efficient algorithm for computing the terms appearing in the Generalised Kolmogorov Equation (GKE) written for the indefinite plane channel flow is presented. The algorithm, which features three distinct strategies for parallel computing, is designed such that CPU and memory requirements are kept to a minimum, so that high-Re wall-bounded flows can be afforded. Computational efficiency is mainl… ▽ More An efficient algorithm for computing the terms appearing in the Generalised Kolmogorov Equation (GKE) written for the indefinite plane channel flow is presented. The algorithm, which features three distinct strategies for parallel computing, is designed such that CPU and memory requirements are kept to a minimum, so that high-Re wall-bounded flows can be afforded. Computational efficiency is mainly achieved by leveraging the Parseval's theorem for the two homogeneous directions available in the plane channel geometry. A speedup of 3-4 orders of magnitude, depending on the problem size, is reported in comparison to a key implementation used in the literature. Validation of the code is demonstrated by computing the residual of the GKE, and example results are presented for channel flows at Re_τ=200 and Re_τ=1000, where for the first time they are observed in the whole four-dimensional domain. It is shown that the space and scale properties of the scale-energy fluxes change for increasing values of the Reynolds number. Among all scale-energy fluxes, the wall-normal flux is found to show the richest behaviour for increasing streamwise scales. △ Less

Submitted 14 October, 2019; originally announced October 2019.

Journal ref: Journal of Turbulence 20(8); 457--480; 2019

Revisiting the amplitude modulation in wall-bounded turbulence: towards a robust definition

Authors: E. Dogan, R. Örlü, D. Gatti, R. Vinuesa, P. Schlatter

Abstract: The present study revisits the amplitude modulation phenomenon, specifically for the robustness in its quantification. To achieve this, a well-resolved large-eddy simulation (LES) data set at Re_theta= 8200 is used. First, the fluctuating streamwise velocity signal is decomposed into its small- and large-scale components using both Fourier filters and empirical mode decomposition (EMD), allowing t… ▽ More The present study revisits the amplitude modulation phenomenon, specifically for the robustness in its quantification. To achieve this, a well-resolved large-eddy simulation (LES) data set at Re_theta= 8200 is used. First, the fluctuating streamwise velocity signal is decomposed into its small- and large-scale components using both Fourier filters and empirical mode decomposition (EMD), allowing the comparison among different separation filters. The effects of these filters on various definitions for quantifying the amplitude modulation have been discussed. False positive identification of the amplitude modulation has also been tested using a randomised signal. Finally, the impact of the inclination angle of the large-scale structures on the modulation quantification has been assessed. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: Proc. 12th ERCOFTAC Symp. on Engineering Turbulence Modeling and Measurements (ETMM12), Montpellier, France, September 26-28, 2018

Global energy fluxes in fully-developed turbulent channels with flow control

Authors: Davide Gatti, Andrea Cimarelli, Yosuke Hasegawa, Bettina Frohnapfel, Maurizio Quadrio

Abstract: This paper addresses the integral energy fluxes in natural and controlled turbulent channel flows, where active skin-friction drag reduction techniques allow a more efficient use of the available power. We study whether the increased efficiency shows any general trend in how energy is dissipated by the mean velocity field (mean dissipation) and by the fluctuating velocity field (turbulent dissipat… ▽ More This paper addresses the integral energy fluxes in natural and controlled turbulent channel flows, where active skin-friction drag reduction techniques allow a more efficient use of the available power. We study whether the increased efficiency shows any general trend in how energy is dissipated by the mean velocity field (mean dissipation) and by the fluctuating velocity field (turbulent dissipation). Direct Numerical Simulations (DNS) of different control strategies are performed at Constant Power Input (CPI), so that at statistical equilibrium each flow (either uncontrolled or controlled by different means) has the same power input, hence the same global energy flux and, by definition, the same total energy dissipation rate. The simulations reveal that changes in mean and turbulent energy dissipation rates can be of either sign in a successfully controlled flow. A quantitative description of these changes is made possible by a new decomposition of the total dissipation, stemming from an extended Reynolds decomposition, where the mean velocity is split into a laminar component and a deviation from it. Thanks to the analytical expressions of the laminar quantities, exact relationships are derived that link the achieved flow rate increase and all energy fluxes in the flow system with two wall-normal integrals of the Reynolds shear stress and the Reynolds number. The dependence of the energy fluxes on the Reynolds number is elucidated with a simple model in which the control-dependent changes of the Reynolds shear stress are accounted for via a modification of the mean velocity profile. The physical meaning of the energy fluxes stemming from the new decomposition unveils their inter-relations and connection to flow control, so that a clear target for flow control can be identified. △ Less

Submitted 3 September, 2018; originally announced September 2018.

Absolute spectroscopy near 7.8 μm with a comb-locked extended-cavity quantum-cascade-laser

Authors: Marco Lamperti, Bidoor Alsaif, Davide Gatti, Martin Fermann, Paolo Laporta, Aamir Farooq, Marco Marangoni

Abstract: We report the first experimental demonstration of frequency-locking of an extended-cavity quantum-cascade-laser (EC-QCL) to a near-infrared frequency comb. The locking scheme is applied to carry out absolute spectroscopy of N2O lines near 7.87 μm with an accuracy of ~60 kHz. Thanks to a single mode operation over more than 100 cm^{-1}, the comb-locked EC-QCL shows great potential for the accurate… ▽ More We report the first experimental demonstration of frequency-locking of an extended-cavity quantum-cascade-laser (EC-QCL) to a near-infrared frequency comb. The locking scheme is applied to carry out absolute spectroscopy of N2O lines near 7.87 μm with an accuracy of ~60 kHz. Thanks to a single mode operation over more than 100 cm^{-1}, the comb-locked EC-QCL shows great potential for the accurate retrieval of line center frequencies in a spectral region that is currently outside the reach of broadly tunable cw sources, either based on difference frequency generation or optical parametric oscillation. The approach described here can be straightforwardly extended up to 12 μm, which is the current wavelength limit for commercial cw EC-QCLs. △ Less

Submitted 31 July, 2017; originally announced August 2017.

Comments: 4 pages, 3 figures

Scanning micro-resonator direct-comb absolute spectroscopy

Authors: Alessio Gambetta, Marco Cassinerio, Davide Gatti, Paolo Laporta, Gianluca Galzerano

Abstract: Direct optical frequency Comb Spectroscopy (DCS) is proving to be a fundamental tool in many areas of science and technology thanks to its unique performance in terms of ultra-broadband, high-speed detection and frequency accuracy, allowing for high-fidelity map** of atomic and molecular energy structure. Here we present a novel DCS approach based on a scanning Fabry-Perot micro-cavity resonator… ▽ More Direct optical frequency Comb Spectroscopy (DCS) is proving to be a fundamental tool in many areas of science and technology thanks to its unique performance in terms of ultra-broadband, high-speed detection and frequency accuracy, allowing for high-fidelity map** of atomic and molecular energy structure. Here we present a novel DCS approach based on a scanning Fabry-Perot micro-cavity resonator (SMART) providing a simple, compact and accurate method to resolve the mode structure of an optical frequency comb. The SMART approach, while drastically reducing system complexity, allows for a straightforward absolute calibration of the optical-frequency axis with an ultimate resolution limited by the micro-resonator resonance linewidth and can be used in any spectral region from XUV to THz. An application to high-precision spectroscopy of acetylene at 1.54 um is presented, demonstrating frequency resolution as low as 20 MHz with a single-scan optical bandwidth up to 1 THz in 20-ms measurement time and a noise-equivalent-absorption level per comb mode of 2.7 10^-9 cm^-1 Hz^(-1/2). Using higher finesse micro-resonators along with an enhancement cavity, this technique has the potential to improve by more than one order of magnitude the noise equivalent absorption in a multiterahertz spectral interval with unchanged frequency resolution. △ Less

Submitted 27 April, 2016; originally announced April 2016.

Reynolds-dependence of turbulent skin-friction drag reduction induced by spanwise forcing

Authors: Davide Gatti, Maurizio Quadrio

Abstract: This paper examines how increasing the value of the Reynolds number $Re$ affects the ability of spanwise-forcing techniques to yield turbulent skin-friction drag reduction. The considered forcing is based on the streamwise-travelling waves of spanwise wall velocity (Quadrio {\em et al. J. Fluid Mech.}, vol. 627, 2009, pp. 161--178). The study builds upon an extensive drag-reduction database create… ▽ More This paper examines how increasing the value of the Reynolds number $Re$ affects the ability of spanwise-forcing techniques to yield turbulent skin-friction drag reduction. The considered forcing is based on the streamwise-travelling waves of spanwise wall velocity (Quadrio {\em et al. J. Fluid Mech.}, vol. 627, 2009, pp. 161--178). The study builds upon an extensive drag-reduction database created with Direct Numerical Simulation of a turbulent channel flow for two, 5-fold separated values of $Re$, namely $Re_τ=200$ and $Re_τ=1000$. The sheer size of the database, which for the first time systematically addresses the amplitude of the forcing, allows a comprehensive view of the drag-reducing characteristics of the travelling waves, and enables a detailed description of the changes occurring when $Re$ increases. The effect of using a viscous scaling based on the friction velocity of either the non-controlled flow or the drag-reduced flow is described. In analogy with other wall-based drag reduction techniques, like for example riblets, the performance of the travelling waves is well described by a vertical shift of the logarithmic portion of the mean streamwise velocity profile. Except when $Re$ is very low, this shift remains constant with $Re$, at odds with the percentage reduction of the friction coefficient, which is known to present a mild, logarithmic decline. Our new data agree with the available literature, which is however mostly based on low-$Re$ information and hence predicts a quick drop of maximum drag reduction with $Re$. The present study supports a more optimistic scenario, where for an airplane at flight Reynolds numbers a drag reduction of nearly 30\% would still be possible thanks to the travelling waves. △ Less

Submitted 13 July, 2016; v1 submitted 26 December, 2015; originally announced December 2015.

Non-Hermitian transparency and one-way transport in low-dimensional lattices by an imaginary gauge field

Authors: Stefano Longhi, Davide Gatti, Giuseppe Della Valle

Abstract: Unidirectional and robust transport is generally observed at the edge of two- or three-dimensional quantum Hall and topological insulator systems. A hallmark of these systems is topological protection, i.e. the existence of propagative edge states that cannot be scattered by imperfections or disorder in the system. A different and less explored form of robust transport arises in non-Hermitian syst… ▽ More Unidirectional and robust transport is generally observed at the edge of two- or three-dimensional quantum Hall and topological insulator systems. A hallmark of these systems is topological protection, i.e. the existence of propagative edge states that cannot be scattered by imperfections or disorder in the system. A different and less explored form of robust transport arises in non-Hermitian systems in the presence of an {\it imaginary} gauge field. As compared to topologically-protected transport in quantum Hall and topological insulator systems, robust non-Hermitian transport can be observed in {\it lower} dimensional (i.e. one dimensional) systems. In this work the transport properties of one-dimensional tight-binding lattices with an imaginary gauge field are theoretically investigated, and the physical mechanism underlying robust one-way transport is highlighted. Back scattering is here forbidden because reflected waves are evanescent rather than propagative. Remarkably, the spectral transmission of the non-Hermitian lattice is shown to be mapped into the one of the corresponding Hermitian lattice, i.e. without the gauge field, {\it but} computed in the complex plane. In particular, at large values of the gauge field the spectral transmittance becomes equal to one, even in the presence of disorder or lattice imperfections. This phenomenon can be referred to as {\it one-way non-Hermitian transparency}. Robust one-way transport can be also realized in a more realistic setting, namely in heterostructure systems, in which a non-Hermitian disordered lattice is embedded between two homogeneous Hermitian lattices. Such a double heterostructure realizes asymmetric (non-reciprocal) wave transmission. A physical implementation of non-Hermtian transparency, based on light transport in a chain of optical microring resonators, is suggested. △ Less

Submitted 15 September, 2015; v1 submitted 28 July, 2015; originally announced July 2015.

Comments: final version, to appear in Physical Review B

Journal ref: Phys. Rev. B 92, 094204 (2015)

Robust light transport in non-Hermitian photonic lattices

Authors: Stefano Longhi, Davide Gatti, Giuseppe Della Valle

Abstract: Combating the effects of disorder on light transport in micro- and nano-integrated photonic devices is of major importance from both fundamental and applied viewpoints. In ordinary waveguides, imperfections and disorder cause unwanted back-reflections, which hinder large-scale optical integration. Topological photonic structures, a new class of optical systems inspired by quantum Hall effect and t… ▽ More Combating the effects of disorder on light transport in micro- and nano-integrated photonic devices is of major importance from both fundamental and applied viewpoints. In ordinary waveguides, imperfections and disorder cause unwanted back-reflections, which hinder large-scale optical integration. Topological photonic structures, a new class of optical systems inspired by quantum Hall effect and topological insulators, can realize robust transport via topologically-protected unidirectional edge modes. Such waveguides are realized by the introduction of synthetic gauge fields for photons in a two-dimensional structure, which break time reversal symmetry and enable one-way guiding at the edge of the medium. Here we suggest a different route toward robust transport of light in lower-dimensional (1D) photonic lattices, in which time reversal symmetry is broken because of the {\it non-Hermitian} nature of transport. While a forward propagating mode in the lattice is amplified, the corresponding backward propagating mode is damped, thus resulting in an asymmetric transport that is rather insensitive to disorder or imperfections in the structure. Non-Hermitian transport in two lattice models is considered: a tight-binding lattice with an imaginary gauge field (Hatano-Nelson model), and a non-Hermitian driven binary lattice. In the former case transport in spite of disorder is ensured by a mobility edge that arises because of a non-Hermitian delocalization transition. The possibility to observe non-Hermitian delocalization induced by a synthetic 'imaginary' gauge field is suggested using an engineered coupled-resonator optical waveguide (CROW) structure. △ Less

Submitted 24 July, 2015; v1 submitted 30 March, 2015; originally announced March 2015.

Comments: revised and extended version, to appear in Sci. Rep

Journal ref: Scientific Reports 5, 13376 (2015)

Multidimensional mutual information methods for the analysis of covariation in multiple sequence alignments

Authors: Greg W. Clark, Sharon H. Ackerman, Elisabeth R. Tillier, Domenico L. Gatti

Abstract: Several methods are available for the detection of covarying positions from a multiple sequence alignment (MSA). If the MSA contains a large number of sequences, information about the proximities between residues derived from covariation maps can be sufficient to predict a protein fold. If the structure is already known, information on the covarying positions can be valuable to understand the prot… ▽ More Several methods are available for the detection of covarying positions from a multiple sequence alignment (MSA). If the MSA contains a large number of sequences, information about the proximities between residues derived from covariation maps can be sufficient to predict a protein fold. If the structure is already known, information on the covarying positions can be valuable to understand the protein mechanism. In this study we have sought to determine whether a multivariate extension of traditional mutual information (MI) can be an additional tool to study covariation. The performance of two multidimensional MI (mdMI) methods, designed to remove the effect of ternary/quaternary interdependencies, was tested with a set of 9 MSAs each containing <400 sequences, and was shown to be comparable to that of methods based on maximum entropy/pseudolikelyhood statistical models of protein sequences. However, while all the methods tested detected a similar number of covarying pairs among the residues separated by < 8 Å in the reference X-ray structures, there was on average less than 65% overlap between the top scoring pairs detected by methods that are based on different principles. We have also attempted to identify whether the difference in performance among methods is due to different efficiency in removing covariation originating from chains of structural contacts. We found that the reason why methods that derive partial correlation between the columns of a MSA provide a better recognition of close contacts is not because they remove chaining effects, but because they filter out the correlation between distant residues that originates from general fitness constraints. In contrast we found that true chaining effects are expression of real physical perturbations that propagate inside proteins, and therefore are not removed by the derivation of partial correlation between variables. △ Less

Submitted 26 April, 2014; originally announced April 2014.

Comments: 21 pages, 4 figures, 1 table, supporting information containing 2 additional figures is included at the end of the manuscript

Performance losses of drag-reducing spanwise forcing at moderate values of the Reynolds number

Authors: Davide Gatti, Maurizio Quadrio

Abstract: A fundamental problem in the field of turbulent skin-friction drag reduction is to determine the performance of the available control techniques at high values of the Reynolds number $Re$. We consider active, predetermined strategies based on spanwise forcing (oscillating wall and streamwise-traveling waves applied to a plane channel flow), and explore via Direct Numerical Simulations (DNS) up to… ▽ More A fundamental problem in the field of turbulent skin-friction drag reduction is to determine the performance of the available control techniques at high values of the Reynolds number $Re$. We consider active, predetermined strategies based on spanwise forcing (oscillating wall and streamwise-traveling waves applied to a plane channel flow), and explore via Direct Numerical Simulations (DNS) up to $Re_τ=2100$ the rate at which their performance deteriorates as $Re$ is increased. To be able to carry out a comprehensive parameter study, we limit the computational cost of the simulations by adjusting the size of the computational domain in the homogeneous directions, compromising between faster computations and the increased need of time-averaging the fluctuating space-mean wall shear-stress. Our results, corroborated by a few full-scale DNS, suggest a scenario where drag reduction degrades with $Re$ at a rate that varies according to the parameters of the wall forcing. In agreement with already available information, kee** them at their low-$Re$ optimal value produces a relatively quick decrease of drag reduction. However, at higher $Re$ the optimal parameters shift towards other regions of the parameter space, and these regions turn out to be much less sensitive to $Re$. Once this shift is accounted for, drag reduction decreases with $Re$ at a markedly slower rate. If the slightly favorable trend of the energy required to create the forcing is considered, a chance emerges for positive net energy savings also at large values of the Reynolds number. △ Less

Submitted 30 December, 2013; v1 submitted 25 December, 2012; originally announced December 2012.

Comments: Revised version: change of title, revised intro, small improvements to figures and text

250-MHz synchronously pumped optical parametric oscillator at 2.25-2.6 μm and 4.1-4.9 μm

Authors: Nicola Coluccelli, Helge Fonnum, Magnus Haakestad, Alessio Gambetta, Davide Gatti, Marco Marangoni, Paolo Laporta, Gianluca Galzerano

Abstract: A compact and versatile femtosecond mid-IR source is presented, based on an optical parametric oscillator (OPO) synchronously pumped by a commercial 250-MHz Er:fiber laser. The mid-IR spectrum can be tuned in the range 2.25-2.6 μm (signal) and 4.1-4.9 μm (idler), with average power from 20 to 60 mW. At 2.5 μm a minimum pulse duration of 110 fs and a power of 40 mW have been obtained. Active stabil… ▽ More A compact and versatile femtosecond mid-IR source is presented, based on an optical parametric oscillator (OPO) synchronously pumped by a commercial 250-MHz Er:fiber laser. The mid-IR spectrum can be tuned in the range 2.25-2.6 μm (signal) and 4.1-4.9 μm (idler), with average power from 20 to 60 mW. At 2.5 μm a minimum pulse duration of 110 fs and a power of 40 mW have been obtained. Active stabilization of the OPO cavity length has been achieved in the whole tuning range. △ Less

Submitted 4 July, 2012; originally announced July 2012.

Business fluctuations in a credit-network economy

Authors: Domenico Delli Gatti, Mauro Gallegati, Bruce Greenwald, Alberto Russo, Joseph E. Stiglitz

Abstract: We model a network economy with three sectors: downstream firms, upstream firms, and banks. Agents are linked by productive and credit relationships so that the behavior of one agent influences the behavior of the others through network connections. Credit interlinkages among agents are a source of bankruptcy diffusion: in fact, failure of fulfilling debt commitments would lead to bankruptcy chain… ▽ More We model a network economy with three sectors: downstream firms, upstream firms, and banks. Agents are linked by productive and credit relationships so that the behavior of one agent influences the behavior of the others through network connections. Credit interlinkages among agents are a source of bankruptcy diffusion: in fact, failure of fulfilling debt commitments would lead to bankruptcy chains. All in all, the bankruptcy in one sector can diffuse to other sectors through linkages creating a vicious cycle and bankruptcy avalanches in the network economy. Our analysis show how the choices of credit supply by both banks and firms are interrelated. While the initial impact of monetary policy is on bank behaviour, we show the interactive play between the choices made by banks, the choices made by firms in their role as providers of credit, and the choices made by firms in their role as producers. △ Less

Submitted 17 June, 2010; originally announced June 2010.

Journal ref: Physica A: Statistical Mechanics and its Applications, Vol: 370, Issue: 1, 1 October 2006, pp: 68-74

Reflections on Modern Macroeconomics: Can We Travel Along a Safer Road?

Authors: E. Gaffeo, M. Catalano, F. Clementi, D. Delli Gatti, M. Gallegati, A. Russo

Abstract: In this paper we sketch some reflections on the pitfalls and inconsistencies of the research program - currently dominant among the profession - aimed at providing microfoundations to macroeconomics along a Walrasian perspective. We argue that such a methodological approach constitutes an unsatisfactory answer to a well-posed research question, and that alternative promising routes have been lon… ▽ More In this paper we sketch some reflections on the pitfalls and inconsistencies of the research program - currently dominant among the profession - aimed at providing microfoundations to macroeconomics along a Walrasian perspective. We argue that such a methodological approach constitutes an unsatisfactory answer to a well-posed research question, and that alternative promising routes have been long mapped out but only recently explored. In particular, we discuss a recent agent-based, truly non-Walrasian macroeconomic model, and we use it to envisage new challenges for future research. △ Less

Submitted 14 August, 2006; originally announced August 2006.

Comments: Latex2e v1.6; 17 pages with 4 figures; for inclusion in the APFA5 Proceedings

Journal ref: Physica A: Statistical Mechanics and its Applications, Vol: 382, Issue: 1, 1 August 2007, pp: 89-97

A new approach to business fluctuations: heterogeneous interacting agents, scaling laws and financial fragility

Authors: Domenico Delli Gatti, Corrado Di Guilmi, Edoardo Gaffeo, Gianfranco Giulioni, Mauro Gallegati, Antonio Palestrini

Abstract: In this paper we discuss a scaling approach to business fluctuations. Our starting point consists in recognizing that concepts and methods derived from physics have allowed economists to (re)discover a set of stylized facts which have to be satisfactorily accounted for in their models. Standard macroeconomics, based on a reductionist approach centered on the representative agent, is definitely b… ▽ More In this paper we discuss a scaling approach to business fluctuations. Our starting point consists in recognizing that concepts and methods derived from physics have allowed economists to (re)discover a set of stylized facts which have to be satisfactorily accounted for in their models. Standard macroeconomics, based on a reductionist approach centered on the representative agent, is definitely badly equipped for this task. On the contrary, we show that a simple financial fragility agent-based model, based on complex interactions of heterogeneous agents, is able to replicate a large number of scaling type stylized facts with a remarkable high degree of statistical precision. △ Less

Submitted 3 December, 2003; originally announced December 2003.

Comments: 35 pages. Accepted by "Journal of Economic Behaviour and Organisation"