-
Design of an arrangement of cubic magnets for a quasi-axisymmetric stellarator experiment
Authors:
K. C. Hammond,
C. Zhu,
K. Corrigan,
D. A. Gates,
R. Lown,
R. Mercurio,
T. M. Qian,
M. C. Zarnstorff
Abstract:
The usage of permanent magnets to shape the confining magnetic field of a stellarator has the potential to reduce or eliminate the need for non-planar coils. As a proof-of-concept for this idea, we have developed a procedure for designing an array of cubic permanent magnets that works in tandem with a set of toroidal-field coils to confine a stellarator plasma. All of the magnets in the design are…
▽ More
The usage of permanent magnets to shape the confining magnetic field of a stellarator has the potential to reduce or eliminate the need for non-planar coils. As a proof-of-concept for this idea, we have developed a procedure for designing an array of cubic permanent magnets that works in tandem with a set of toroidal-field coils to confine a stellarator plasma. All of the magnets in the design are constrained to have identical geometry and one of three polarization types in order to simplify fabrication while still producing sufficient field accuracy. We present some of the key steps leading to the design, including the geometric arrangement of the magnets around the device, the procedure for optimizing the polarizations according to the three allowable magnet types, and the choice of magnet types to be used. We apply these methods to design an array of rare-Earth permanent magnets that can be paired with a set of planar toroidal-field coils to confine a quasi-axisymmetric plasma with a toroidal magnetic field strength of about 0.5 T on axis.
△ Less
Submitted 16 November, 2022; v1 submitted 15 April, 2022;
originally announced April 2022.
-
Initial operation and data processing on a system for real-time evaluation of Thomson scattering signals on the Large Helical Device
Authors:
K. C. Hammond,
F. M. Laggner,
A. Diallo,
S. Doskoczynski,
C. Freeman,
H. Funaba,
D. A. Gates,
R. Rozenblat,
G. Tchilinguirian,
Z. Xing,
I. Yamada,
R. Yasuhara,
G. Zimmer,
E. Kolemen
Abstract:
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four s…
▽ More
A scalable system for real-time analysis of electron temperature and density based on signals from the Thomson scattering diagnostic, initially developed for and installed on the NSTX-U experiment, was recently adapted for the Large Helical Device (LHD) and operated for the first time during plasma discharges. During its initial operation run, it routinely recorded and processed signals for four spatial points at the laser repetition rate of 30 Hz, well within the system's rated capability for 60 Hz. We present examples of data collected from this initial run and describe subsequent adaptations to the analysis code to improve the fidelity of the temperature calculations.
△ Less
Submitted 23 June, 2021; v1 submitted 9 January, 2021;
originally announced January 2021.
-
Geometric concepts for stellarator permanent magnet arrays
Authors:
K. C. Hammond,
C. Zhu,
T. Brown,
K. Corrigan,
D. A. Gates,
M. Sibilia
Abstract:
The development of stellarators that use permanent magnet arrays to shape their confining magnetic fields has been a topic of recent interest, but the requirements for how such magnets must be shaped, manufactured, and assembled remain to be determined. To address these open questions, we have performed a study of geometric concepts for magnet arrays with the aid of the newly developed MAGPIE code…
▽ More
The development of stellarators that use permanent magnet arrays to shape their confining magnetic fields has been a topic of recent interest, but the requirements for how such magnets must be shaped, manufactured, and assembled remain to be determined. To address these open questions, we have performed a study of geometric concepts for magnet arrays with the aid of the newly developed MAGPIE code. A proposed experiment similar to the National Compact Stellarator Experiment (NCSX) is used as a test case. Two classes of magnet geometry are explored: curved bricks that conform to a regular grid in cylindrical coordinates, and hexahedra that conform to the toroidal plasma geometry. In addition, we test constraints on the magnet polarization. While magnet configurations constrained to be polarized normally to a toroidal surface around the plasma are unable to meet the required magnetic field parameters when subject to physical limitations on the strength of present-day magnets, configurations with unconstrained polarizations are shown to satisfy the physics requirements for a targeted plasma.
△ Less
Submitted 12 August, 2020; v1 submitted 29 May, 2020;
originally announced June 2020.
-
Identification of important error fields in stellarators using Hessian matrix method
Authors:
Caoxiang Zhu,
David A. Gates,
Stuart R. Hudson,
Haifeng Liu,
Yuhong Xu,
Akihiro Shimizu,
Shoichi Okamura
Abstract:
Error fields are predominantly attributed to inevitable coil imperfections. Controlling error fields during coil fabrication and assembly is crucial for stellarators. Excessively tight coil tolerance increases time and cost, and, in part, led to the cancellation of NCSX and delay of W7-X. In this paper, we improve the recently proposed Hessian matrix method to rapidly identify important coil devia…
▽ More
Error fields are predominantly attributed to inevitable coil imperfections. Controlling error fields during coil fabrication and assembly is crucial for stellarators. Excessively tight coil tolerance increases time and cost, and, in part, led to the cancellation of NCSX and delay of W7-X. In this paper, we improve the recently proposed Hessian matrix method to rapidly identify important coil deviations. Two of the most common figures of merit, magnetic island size and quasi-symmetry, are analytically differentiated over coil parameters. By extracting the eigenvectors of the Hessian matrix, we can directly identify sensitive coil deviations in the order of the eigenvalues. The new method is applied to the upcoming CFQS configuration. Important perturbations that enlarge n/m=4/11 islands and deteriorate quasi-axisymmetry of the magnetic field are successfully determined. The results suggest each modular coil should have separate tolerance and some certain perturbation combinations will produce significant error fields. By relaxing unnecessary coil tolerance, this method will hopefully lead to a substantial reduction in time and cost.
△ Less
Submitted 4 September, 2019; v1 submitted 8 April, 2019;
originally announced April 2019.
-
High flux expansion divertor studies in NSTX
Authors:
V. A. Soukhanovskii,
R. Maingi,
R. E. Bell,
D. A. Gates,
R. Kaita,
H. W. Kugel,
B. P. LeBlanc,
R. Maqueda,
J. E. Menard,
D. Mueller,
S. F. Paul,
R. Raman,
A. L. Roquemore
Abstract:
High flux expansion divertor studies have been carried out in the National Spherical Torus Experiment using steady-state X-point height variations from 22 to 5-6 cm. Small-ELM H-mode confinement was maintained at all X-point heights. Divertor flux expansions from 6 to 26-28 were obtained, with associated reduction in X-point connection length from 5-6 m to 2 m. Peak divertor heat flux was reduce…
▽ More
High flux expansion divertor studies have been carried out in the National Spherical Torus Experiment using steady-state X-point height variations from 22 to 5-6 cm. Small-ELM H-mode confinement was maintained at all X-point heights. Divertor flux expansions from 6 to 26-28 were obtained, with associated reduction in X-point connection length from 5-6 m to 2 m. Peak divertor heat flux was reduced from 7-8 MW/m$^2$ to 1-2 MW/m$^2$. In low X-point configuration, outer strike point became nearly detached. Among factors affecting deposition of parallel heat flux in the divertor, the flux expansion factor appeared to be dominant
△ Less
Submitted 21 December, 2009;
originally announced December 2009.