-
Radial Density Profile and Stability of Capillary Discharge Plasma Waveguides of Lengths up to 40 Centimeters
Authors:
M. Turner,
A. J. Gonsalves,
S. S. Bulvanov,
C. Benedetti,
N. A. Bobrova,
V. A. Gasilov,
P. V. Sasorov,
G. Korn,
K. Nakamura,
J. van Tilborg,
C. G. Geddes,
C. B. Schroeder,
E. Esarey
Abstract:
We measured the parameter reproducibility and radial electron density profile of capillary discharge waveguides with diameters of 650 um to 2 mm and lengths of 9 to 40 cm. To our knowledge, 40 cm is the longest discharge capillary plasma waveguide to date. This length is important for >= 10 GeV electron energy gain in a single laser driven plasma wakefield acceleration (LPA) stage. Evaluation of w…
▽ More
We measured the parameter reproducibility and radial electron density profile of capillary discharge waveguides with diameters of 650 um to 2 mm and lengths of 9 to 40 cm. To our knowledge, 40 cm is the longest discharge capillary plasma waveguide to date. This length is important for >= 10 GeV electron energy gain in a single laser driven plasma wakefield acceleration (LPA) stage. Evaluation of waveguide parameter variations showed that their focusing strength was stable and reproducible to <0.2% and their average on-axis plasma electron density to <1%. These variations explain only a small fraction of LPA electron bunch variations observed in experiments to date. Measurements of laser pulse centroid oscillations revealed that the radial channel profile rises faster than parabolic and are in excellent agreement with magneto-hydro-dynamic simulation results. We show that the effects of non-parabolic contributions on Gaussian pulse propagation were negligible when the pulse was approximately matched to the channel. However, they affected pulse propagation for a non-matched configuration in which the waveguide was used as a plasma telescope to change the focused laser pulse spot size.
△ Less
Submitted 14 January, 2021; v1 submitted 10 December, 2020;
originally announced December 2020.
-
Optimisation of Thin Plastic Foil Targets for Production of Laser-Generated Protons in the GeV Range
Authors:
P. Hadjisolomou,
I. P. Tsygvintsev,
P. Sasorov,
V. Gasilov,
G. Korn,
S. V. Bulanov
Abstract:
In order to realistically simulate the interaction of a femtosecond laser pulse with a nanometre-thick target it is necessary to consider a target preplasma formation due to the nanosecond long amplified-spontaneous-emission pedestal and/or prepulse. The relatively long interaction time dictated that hydrodynamic simulations should be employed to predict the target particles' number density distri…
▽ More
In order to realistically simulate the interaction of a femtosecond laser pulse with a nanometre-thick target it is necessary to consider a target preplasma formation due to the nanosecond long amplified-spontaneous-emission pedestal and/or prepulse. The relatively long interaction time dictated that hydrodynamic simulations should be employed to predict the target particles' number density distributions prior the arrival of the main laser pulse. By using the output of the hydrodynamic simulations as input into particle-in-cell simulations, a detailed understanding of the complete laser-foil interaction is achieved. Once the laser pulse interacts with the preplasma it deposits a fraction of its energy on the target, before it is either reflected from the critical density surface or transmitted through an underdense plasma channel. A fraction of hot electrons is ejected from the target leaving the foil in a net positive potential, which in turn results in proton and heavy ion ejection. In this work protons reaching ~25 MeV are predicted for a laser of ~40 TW peak power and ~600 MeV are expected from a ~4 PW laser system.
△ Less
Submitted 14 August, 2019;
originally announced August 2019.
-
On production and asymmetric focusing of flat electron beams using rectangular capillary discharge plasmas
Authors:
G. A. Bagdasarov,
N. A. Bobrova,
A. S. Boldarev,
O. G. Olkhovskaya,
P. V. Sasorov,
V. A. Gasilov,
S. K. Barber,
S. S. Bulanov,
A. J. Gonsalves,
C. B. Schroeder,
J. van Tilborg,
E. Esarey,
W. P. Leemans,
T. Levato,
D. Margarone,
G. Korn,
M. Kando,
S. V. Bulanov
Abstract:
A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissip…
▽ More
A method for the asymmetric focusing of electron bunches, based on the active plasma lensing technique is proposed. This method takes advantage of the strong inhomogeneous magnetic field generated inside the capillary discharge plasma to focus the ultrarelativistic electrons. The plasma and magnetic field parameters inside the capillary discharge are described theoretically and modeled with dissipative magnetohydrodynamic computer simulations enabling analysis of the capillaries of rectangle cross-sections. Large aspect ratio rectangular capillaries might be used to transport electron beams with high emittance asymmetries, as well as assist in forming spatially flat electron bunches for final focusing before the interaction point.
△ Less
Submitted 7 December, 2017; v1 submitted 20 October, 2017;
originally announced October 2017.
-
Plasma Equilibrium inside Various Cross-Section Capillary Discharges
Authors:
Gennadiy Bagdasarov,
Pavel Sasorov,
Alexey Boldarev,
Olga Olkhovskaya,
Vladimir Gasilov,
Anthony J. Gonsalves,
Samuel Barber,
Stepan Bulanov,
Carl B. Schroeder,
Jeroen van Tilborg,
Eric Esarey,
Wim P. Leemans,
Tadzio Levato,
Daniele Margarone,
Georg Korn,
Sergei V. Bulanov
Abstract:
Plasma properties inside a hydrogen-filled capillary discharge waveguide were modeled with dissipative magnetohydrodynamic simulations to enable analysis of capillaries of circular and square cross-sections implying that square capillaries can be used to guide circularly-symmetric laser beams. When the quasistationary stage of the discharge is reached, the plasma and temperature in the vicinity of…
▽ More
Plasma properties inside a hydrogen-filled capillary discharge waveguide were modeled with dissipative magnetohydrodynamic simulations to enable analysis of capillaries of circular and square cross-sections implying that square capillaries can be used to guide circularly-symmetric laser beams. When the quasistationary stage of the discharge is reached, the plasma and temperature in the vicinity of the capillary axis has almost the same profile for both the circular and square capillaries. The effect of cross-section on the electron beam focusing properties were studied using the simulation-derived magnetic field map. Particle tracking simulations showed only slight effects on the electron beam symmetry in the horizontal and diagonal directions for square capillary.
△ Less
Submitted 29 March, 2017; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Laser beam coupling with capillary discharge plasma for laser wakefield acceleration applications
Authors:
Gennadiy Bagdasarov,
Pavel Sasorov,
Vladimir Gasilov,
Alexey Boldarev,
Olga Olkhovskaya,
Carlo Benedetti,
Stepan Bulanov,
Anthony Joseph Gonsalves,
Hann-Shin Mao,
Carl B. Schroeder,
Jeroen van Tilborg,
Eric Esarey,
Wim P. Leemans,
Tadzio Levato,
Daniele Margarone,
Georg Korn
Abstract:
One of the most robust methods, demonstrated up to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. These channels, i.e., plasma columns with a minimum density along the laser pulse propagation axis, may optically guide short laser pulses, thereby increasing the acceleration length, leading to a more efficient…
▽ More
One of the most robust methods, demonstrated up to date, of accelerating electron beams by laser-plasma sources is the utilization of plasma channels generated by the capillary discharges. These channels, i.e., plasma columns with a minimum density along the laser pulse propagation axis, may optically guide short laser pulses, thereby increasing the acceleration length, leading to a more efficient electron acceleration. Although the spatial structure of the installation is simple in principle, there may be some important effects caused by the open ends of the capillary, by the supplying channels etc., which require a detailed 3D modeling of the processes taking place in order to get a detailed understanding and improve the operation. However, the discharge plasma, being one of the most crucial components of the laser-plasma accelerator, is not simulated with the accuracy and resolution required to advance this promising technology. In the present work, such simulations are performed using the code MARPLE. First, the process of the capillary filling with a cold hydrogen before the discharge is fired, through the side supply channels is simulated. The main goal of this simulation is to get a spatial distribution of the filling gas in the region near the open ends of the capillary. A realistic geometry is used for this and the next stage simulations, including the insulators, the supplying channels as well as the electrodes. Second, the simulation of the capillary discharge is performed with the goal to obtain a time-dependent spatial distribution of the electron density near the open ends of the capillary as well as inside the capillary. Finally, to evaluate effectiveness of the beam coupling with the channeling plasma wave guide and electron acceleration, modeling of laser-plasma interaction was performed with the code INF&RNO
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Novel path towards compact laser ion accelerators for hadron therapy: Tenfold energy increase in laser-driven multi-MeV ion generation using a gas target mixed with submicron clusters
Authors:
Y. Fukuda,
A. Ya. Faenov,
M. Tampo,
T. A. Pikuz,
T. Nakamura,
M. Kando,
Y. Hayashi,
A. Yogo,
H. Sakaki,
T. Kameshima,
A. S. Pirozhkov,
K. Ogura,
M. Mori,
T. Zh. Esirkepov,
A. S. Boldarev,
V. A. Gasilov,
A. I. Magunov,
R. Kodama,
P. R. Bolton,
Y. Kato,
T. Tajima,
H. Daido,
S. V. Bulanov
Abstract:
We demonstrate generation of 10-20 MeV/u ions with a compact 4 TW laser using a gas target mixed with submicron clusters, corresponding to tenfold increase in the ion energies compared to previous experiments with solid targets. It is inferred that the high energy ions are generated due to formation of a strong dipole vortex structure. The demonstrated method has a potential to construct compact…
▽ More
We demonstrate generation of 10-20 MeV/u ions with a compact 4 TW laser using a gas target mixed with submicron clusters, corresponding to tenfold increase in the ion energies compared to previous experiments with solid targets. It is inferred that the high energy ions are generated due to formation of a strong dipole vortex structure. The demonstrated method has a potential to construct compact and high repetition rate ion sources for hadron therapy and other applications.
△ Less
Submitted 28 February, 2009;
originally announced March 2009.
