-
Dense strontium hexaferrite-based permanent magnet composites assisted by cold sintering process
Authors:
Eduardo García-Martín,
Cecilia Granados-Miralles,
Sandra Ruiz-Gómez,
Lucas Pérez,
Adolfo del Campo,
Jesús Carlos Guzmán-Mínguez,
César de Julián Fernández,
Adrián Quesada,
José F. Fernández,
Aida Serrano
Abstract:
The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free p…
▽ More
The use of rare-earth-based permanent magnets is one of the critical points for the development of the current technology. On the one hand, industry of the rare-earths is highly polluting due to the negative environmental impact of their extraction and, on the other hand, the sector is potentially dependent on China. Therefore, investigation is required both in the development of rare-earth-free permanent magnets and in sintering processes that enable their greener fabrication with attractive magnetic properties at a more competitive price. This work presents the use of a cold sintering process (CSP) followed by a post-annealing at 1100 °C as a new way to sinter composite permanent magnets based on strontium ferrite (SFO). Composites that incorporate a percentage < 10% of an additional magnetic phase have been prepared and the morphological, structural and magnetic properties have been evaluated after each stage of the process. CSP induces a phase transformation of SFO in the composites, which is partially recovered by the post-thermal treatment improving the relative density to 92% and the magnetic response of the final magnets with a coercivity of up to 3.0 kOe. Control of the magnetic properties is possible through the composition and the grain size in the sintered magnets. These attractive results show the potential of the sintering approach as an alternative to develop modern rare-earth-free composite permanent magnets.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Effect of organic solvent on the cold sintering processing of SrFe12O19 platelet-based permanent magnets
Authors:
Aida Serrano,
Eduardo García-Martín,
Cecilia Granados-Miralles,
Jesús López-Sánchez,
Giulio Gorni,
Adrián Quesada,
José F. Fernández
Abstract:
In this work we have investigated the effect of the solvent during the processing of SrFe12O19 platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190-270 °C, under pressures of 375-670 MPa and 6-50 wt% of solvent. Modifications…
▽ More
In this work we have investigated the effect of the solvent during the processing of SrFe12O19 platelet-based permanent magnets by cold sintering process (CSP) plus a post-thermal treatment. Several organic solvents: glacial acetic acid, oleic acid and oleylamine have been analyzed, optimizing the CSP temperatures at 190-270 °C, under pressures of 375-670 MPa and 6-50 wt% of solvent. Modifications in the morphological and structural properties are identified depending on the solvent, which impacts on the magnetic response. Independently of the solvent, the mechanical integrity of ferrite magnets obtained by CSP is improved by a post-annealing at 1100 °C for 2 h, resulting in relative densities around 92 % with an average grain size of 1 μm and a fraction of SrFe12O19 phase > 91 %. Hc > 2.1 kOe and MS of 73 emu/g are obtained in the final sintered ceramic magnets, exhibiting the highest HC value of 2.8 kOe for the magnet sintered using glacial acetic acid.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Quantifying Li-content for compositional tailoring of lithium ferrite ceramics
Authors:
C. Granados-Miralles,
A. Serrano,
P. Prieto,
J. Guzmán-Mínguez,
J. E. Prieto,
A. M. Friedel,
E. García-Martín,
J. F. Fernández,
A. Quesada
Abstract:
Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in tur…
▽ More
Owing to their multiple applications, lithium ferrites are relevant materials for several emerging technologies. For instance, LiFeO2 has been spotted as an alternative cathode material in Li-ion batteries, while LiFe5O8 is the lowest dam** ferrite, holding promise in the field of spintronics. The Li-content in lithium ferrites has been shown to greatly affect the physical properties, and in turn, the performance of functional devices based on these materials. Despite this, lithium content is rarely accurately quantified, as a result of the low number of electrons in Li hindering its identification by means of routine materials characterization methods. In the present work, magnetic lithium ferrite powders with Li:Fe ratios of 1:1, 1:3 and 1:5 have been synthesized, successfully obtaining phase-pure materials (LiFeO2 and LiFe5O8), as well as a controlled mixture of both phases. The powders have been compacted and subsequently sintered by thermal treatment (Tmax = 1100 °C) to fabricate dense pellets which preserve the original Li:Fe ratios. Li-content on both powders and pellets has been determined by two independent methods: (i) Rutherford backscattering spectroscopy combined with nuclear reaction analysis and (ii) Rietveld analysis of powder X-ray diffraction data. With good agreement between both techniques, it has been confirmed that the Li:Fe ratios employed in the synthesis are maintained in the sintered ceramics. The same conclusion is drawn from spatially-resolved confocal Raman microscopy experiments on regions of a few microns. Field emission scanning electron microscopy has evidenced the substantial grain growth taking place during the sintering process - mean particle sizes rise from about 600 nm in the powders up to 3.8(6) um for dense LiFeO2 and 10(2) um for LiFe5O8 ceramics.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Hexaferrite-based permanent magnets with upper magnetic properties by cold sintering process via a non-aqueous solvent
Authors:
Aida Serrano,
Eduardo García-Martín,
Cecilia Granados-Miralles,
Giulio Gorni,
Jesús López-Sánchez,
Sandra Ruiz-Gómez,
Lucas Pérez,
Adrián Quesada,
José F. Fernández
Abstract:
The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for develo** dense sintered magnets based on Sr-hexaferrites…
▽ More
The incessant technological pursuit towards a more sustainable and green future depends strongly on permanent magnets. At present, their use is widespread, making it imperative to develop new processing methods that generate highly competitive magnetic properties reducing the fabrication temperatures and costs. Herein, a novel strategy for develo** dense sintered magnets based on Sr-hexaferrites with upper functional characteristics is presented. An innovative cold sintering approach using glacial acetic acid as novelty, followed by a post-annealing at 1100 °C, achieves a densification of the ceramic magnets of 92% with respect to the theoretical density and allows controlling the particle growth. After the cold sintering process, a fraction of amorphous SrO is identified, in addition to a partial transformation to α-Fe2O3 as secondary crystalline phase. 46 wt% of SrFe12O19 remains, which is mostly recuperated after the post-thermal treatment. These findings do not significantly modify the final structure of ferrite magnets, neither at short- nor long-range order. The innovative process has a positive impact on the magnetic properties, yielding competitive ferrite magnets at lower sintering temperatures with an energy efficiency of at least 25%, which opens up a new horizon in the field of rare-earth free permanent magnets and new possibilities in other applications.
△ Less
Submitted 24 September, 2023;
originally announced September 2023.
-
Explainable artificial intelligence toward usable and trustworthy computer-aided early diagnosis of multiple sclerosis from Optical Coherence Tomography
Authors:
Monica Hernandez,
Ubaldo Ramon-Julvez,
Elisa Vilades,
Beatriz Cordon,
Elvira Mayordomo,
Elena Garcia-Martin
Abstract:
Background: Several studies indicate that the anterior visual pathway provides information about the dynamics of axonal degeneration in Multiple Sclerosis (MS). Current research in the field is focused on the quest for the most discriminative features among patients and controls and the development of machine learning models that yield computer-aided solutions widely usable in clinical practice. H…
▽ More
Background: Several studies indicate that the anterior visual pathway provides information about the dynamics of axonal degeneration in Multiple Sclerosis (MS). Current research in the field is focused on the quest for the most discriminative features among patients and controls and the development of machine learning models that yield computer-aided solutions widely usable in clinical practice. However, most studies are conducted with small samples and the models are used as black boxes. Clinicians should not trust machine learning decisions unless they come with comprehensive and easily understandable explanations. Materials and methods: A total of 216 eyes from 111 healthy controls and 100 eyes from 59 patients with relapsing-remitting MS were enrolled. The feature set was obtained from the thickness of the ganglion cell layer (GCL) and the retinal nerve fiber layer (RNFL). Measurements were acquired by the novel Posterior Pole protocol from Spectralis Optical Coherence Tomography (OCT) device. We compared two black-box methods (gradient boosting and random forests) with a glass-box method (explainable boosting machine). Explainability was studied using SHAP for the black-box methods and the scores of the glass-box method. Results: The best-performing models were obtained for the GCL layer. Explainability pointed out to the temporal location of the GCL layer that is usually broken or thinning in MS and the relationship between low thickness values and high probability of MS, which is coherent with clinical knowledge. Conclusions: The insights on how to use explainability shown in this work represent a first important step toward a trustworthy computer-aided solution for the diagnosis of MS with OCT.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Green Accelerated Hoeffding Tree
Authors:
Eva Garcia-Martin,
Albert Bifet,
Niklas Lavesson,
Rikard König,
Henrik Linusson
Abstract:
State-of-the-art machine learning solutions mainly focus on creating highly accurate models without constraints on hardware resources. Stream mining algorithms are designed to run on resource-constrained devices, thus a focus on low power and energy and memory-efficient is essential. The Hoeffding tree algorithm is able to create energy-efficient models, but at the cost of less accurate trees in c…
▽ More
State-of-the-art machine learning solutions mainly focus on creating highly accurate models without constraints on hardware resources. Stream mining algorithms are designed to run on resource-constrained devices, thus a focus on low power and energy and memory-efficient is essential. The Hoeffding tree algorithm is able to create energy-efficient models, but at the cost of less accurate trees in comparison to their ensembles counterpart. Ensembles of Hoeffding trees, on the other hand, create a highly accurate forest of trees but consume five times more energy on average. An extension that tried to obtain similar results to ensembles of Hoeffding trees was the Extremely Fast Decision Tree (EFDT). This paper presents the Green Accelerated Hoeffding Tree (GAHT) algorithm, an extension of the EFDT algorithm with a lower energy and memory footprint and the same (or higher for some datasets) accuracy levels. GAHT grows the tree setting individual splitting criteria for each node, based on the distribution of the number of instances over each particular leaf. The results show that GAHT is able to achieve the same competitive accuracy results compared to EFDT and ensembles of Hoeffding trees while reducing the energy consumption up to 70%.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
Dynamics of Li deposition on epitaxial graphene/Ru(0001) islands
Authors:
J. E. Prieto,
M. A. González-Barrio,
E. García-Martín,
G. D. Soria,
L. Morales de la Garza,
J. de la Figuera
Abstract:
Li metal has been deposited on the surface of a Ru(0001) single crystal containing patches of monolayer-thick epitaxial graphene islands. The use of low-energy electron microscopy and diffraction allowed us to {\em in situ} monitor the process by measuring the local work function as well as to study the system in real and reciprocal space, comparing the changes taking place on the graphene with th…
▽ More
Li metal has been deposited on the surface of a Ru(0001) single crystal containing patches of monolayer-thick epitaxial graphene islands. The use of low-energy electron microscopy and diffraction allowed us to {\em in situ} monitor the process by measuring the local work function as well as to study the system in real and reciprocal space, comparing the changes taking place on the graphene with those on the bare Ru(0001) surface. It is found that Li deposition decreases the work function of the graphene islands but to a much smaller degree than of the Ru(0001) surface, as corresponds to its intercalation below the graphene overlayer. Finally, the diffusion process of Li out of the graphene islands has been monitored by photoelectron microscopy using a visible-light laser.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
RBS/Channeling characterization of Ru(0001) and thin epitaxial Ru/Al$_2$O$_3$(0001) films
Authors:
J. E. Prieto,
E. M. Trapero,
P. Prieto,
E. García-Martín,
G. D. Soria,
P. Galán,
J. de la Figuera
Abstract:
Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry…
▽ More
Thin epitaxial films of metals on insulating substrates are essential for many applications, as conducting layers, in magnetic devices or as templates for further growth. In this work, we report on the growth of epitaxial Ru films on single-crystalline Al$_2$O$_3$(0001) substrates by magnetron sputtering and their subsequent systematic characterization using Rutherford backscattering spectrometry of He ions both in random and in channeling conditions. We include results of a Ru(0001) single crystal for comparison. Analysis of channeling shows that films thicker than 35 nm grow with (0001) orientation, a well-defined epitaxial relation with the substrate and a high degree of crystal quality, comparable to the Ru(0001) single crystal. Thinner films of down to 7 nm in thickness, for which relaxation of epitaxial strain is not complete, produce a similar degree of dechanneling. The surface of the films can be prepared in a clean and ordered state in order to allow further epitaxial growth on top.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Hoeffding Trees with nmin adaptation
Authors:
Eva García-Martín,
Niklas Lavesson,
Håkan Grahn,
Emiliano Casalicchio,
Veselka Boeva
Abstract:
Machine learning software accounts for a significant amount of energy consumed in data centers. These algorithms are usually optimized towards predictive performance, i.e. accuracy, and scalability. This is the case of data stream mining algorithms. Although these algorithms are adaptive to the incoming data, they have fixed parameters from the beginning of the execution. We have observed that hav…
▽ More
Machine learning software accounts for a significant amount of energy consumed in data centers. These algorithms are usually optimized towards predictive performance, i.e. accuracy, and scalability. This is the case of data stream mining algorithms. Although these algorithms are adaptive to the incoming data, they have fixed parameters from the beginning of the execution. We have observed that having fixed parameters lead to unnecessary computations, thus making the algorithm energy inefficient. In this paper we present the nmin adaptation method for Hoeffding trees. This method adapts the value of the nmin parameter, which significantly affects the energy consumption of the algorithm. The method reduces unnecessary computations and memory accesses, thus reducing the energy, while the accuracy is only marginally affected. We experimentally compared VFDT (Very Fast Decision Tree, the first Hoeffding tree algorithm) and CVFDT (Concept-adapting VFDT) with the VFDT-nmin (VFDT with nmin adaptation). The results show that VFDT-nmin consumes up to 27% less energy than the standard VFDT, and up to 92% less energy than CVFDT, trading off a few percent of accuracy in a few datasets.
△ Less
Submitted 3 August, 2018;
originally announced August 2018.
-
Is it ethical to avoid error analysis?
Authors:
Eva García-Martín,
Niklas Lavesson
Abstract:
Machine learning algorithms tend to create more accurate models with the availability of large datasets. In some cases, highly accurate models can hide the presence of bias in the data. There are several studies published that tackle the development of discriminatory-aware machine learning algorithms. We center on the further evaluation of machine learning models by doing error analysis, to unders…
▽ More
Machine learning algorithms tend to create more accurate models with the availability of large datasets. In some cases, highly accurate models can hide the presence of bias in the data. There are several studies published that tackle the development of discriminatory-aware machine learning algorithms. We center on the further evaluation of machine learning models by doing error analysis, to understand under what conditions the model is not working as expected. We focus on the ethical implications of avoiding error analysis, from a falsification of results and discrimination perspective. Finally, we show different ways to approach error analysis in non-interpretable machine learning algorithms such as deep learning.
△ Less
Submitted 30 June, 2017;
originally announced June 2017.
