Showing 1–13 of 13 results for author: Garay, J E

Acoustically Transparent Alumina-based Cranial Implants Enhance Ultrasound Transmission Through a Combined Mechano-Acoustic Resonant Effect

Authors: Mario Ibrahin Gutierrez, Pathikumar Sellappan, Elias H. Penilla, Irais Poblete-Naredo, Arturo Vera, Lorenzo Leija, Javier E. Garay

Abstract: Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be us… ▽ More Therapeutic ultrasound for brain stimulation has increased in the last years. This energy has shown promising results for treating Alzheimers disease, Parkinsons disease, and traumatic brain injury, among other conditions. However, the application of ultrasound in the brain should trespass a natural but highly attenuating and distorting barrier, the cranium. Implantable ceramic materials can be used to replace part of the cranium as an alternate method to enhance ultrasound transmission. In this work, it is presented the acoustic characterization of alumina ceramic disks that can be employed as cranial implants for acoustic windows-to-the-brain. Alumina samples were prepared using current-activated pressure-assisted densification and were acoustically characterized. Acoustic impedance and attenuation of the samples were determined for different porosities. Additionally, measured and modeled acoustic fields are presented and analyzed in terms of the total ultrasound transmitted through the ceramics. Results indicate a resonant behavior in the alumina disks when the thickness corresponds to a half-wavelength of ultrasound; this resonance permits a total of 95.4% of ultrasound transmission; for thicknesses out of the resonant zone, transmission is 53.0%. Alumina proves to be an excellent medium for ultrasound transmission that, in conjunction with its mechanical and optical properties, can be useful for cranium replacement in mixed opto-acoustic applications. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: Journal of Physics: Materials

Thermal Conductivity Measurement Using Modulated Photothermal Radiometry for Nitrate and Chloride Molten Salts

Authors: Ka Man Chung, Tianshi Feng, Jian Zeng, Sarath Reddy Adapa, Xintong Zhang, Andrew Z. Zhao, Ye Zhang, Peiwen Li, Youyang Zhao, Javier E. Garay, Renkun Chen

Abstract: Molten salts are being used or explored for thermal energy storage and conversion systems in concentrating solar power and nuclear power plants. Thermal conductivity of molten salts is an important thermophysical property dictating the performance and cost of these systems, but its accurate measurement has been challenging, as evidenced by wide scattering of existing data in literature. The corros… ▽ More Molten salts are being used or explored for thermal energy storage and conversion systems in concentrating solar power and nuclear power plants. Thermal conductivity of molten salts is an important thermophysical property dictating the performance and cost of these systems, but its accurate measurement has been challenging, as evidenced by wide scattering of existing data in literature. The corrosive and conducting nature of these fluids also leads to time consuming sample preparation processes of many contact-based measurements. Here, we report the measurement of thermal conductivity of molten salts using a modulated photothermal radiometry (MPR) technique, which is a laser-based, non-contact, frequency-domain method adopted for molten salts for the first time. By unitizing the advantages of front side sensing of frequency-domain measurements and the vertical holder orientation, the technique can minimize the natural convection and salt cree** effects, thus yielding accurate molten salt thermal conductivity. The MPR technique is first calibrated using standard molten materials including paraffin wax and sulfur. It is then applied on measuring pure nitrate salts ($NaNO_3$ and $KNO_3$), solar salt ($NaNO_3-KNO_3$ mixture), and chloride salt ($NaCl-KCl-MgCl_2$). The measurement results are compared with data from literature, especially those obtained from laser flash analysis (LFA). Our results demonstrate that the MPR is a convenient and reliable technique of measuring thermal conductivity of molten salts. Accurate thermal conductivity data of molten salts will be valuable in develo** the next-generation high-temperature thermal energy storage and conversion systems. △ Less

Submitted 31 August, 2023; originally announced September 2023.

First principles derivation of a Rayleigh Gans Debye model for scattering from anisotropic inhomogeneities

Authors: M. H. Shachar, J. E. Garay

Abstract: Scattering problems are important in describing light propagation in wide ranging media such as the atmosphere, colloidal solutions, metamaterials, glass ceramic composites, transparent polycrystalline ceramics, and surfaces. The Rayleigh Gans Debye (RGD) approximation has enjoyed great success in describing a wide range of scattering phenomena. We derive a generalized RGD formulation from the per… ▽ More Scattering problems are important in describing light propagation in wide ranging media such as the atmosphere, colloidal solutions, metamaterials, glass ceramic composites, transparent polycrystalline ceramics, and surfaces. The Rayleigh Gans Debye (RGD) approximation has enjoyed great success in describing a wide range of scattering phenomena. We derive a generalized RGD formulation from the perturbation of Maxwell equations. In contrast to most treatments of RGD scattering, our formulation can model any soft scattering phenomena in linear media, including scattering by stochastic process, lossy media, and by anisotropic inhomogeneities occurring at multiple length scales. Our first-principles derivation makes explicit underlying assumptions and provides jum** off points for more general treatments. The derivation also facilitates a deeper understanding of soft scattering. It is demonstrated that sources of scattering are not interfaces as is often presumed, but excess accelerating charges emitting uncompensated radiation. Approximations to the equations are also presented and discussed. For example, the scattering coefficient in the large size RGD limit is shown to be proportional to the correlation length and the variance of a projected phase shift. △ Less

Submitted 2 May, 2023; originally announced May 2023.

First and second order magnetic anisotropy and dam** of europium iron garnet under high strain

Authors: Victor H. Ortiz, Bassim Arkook, Junxue Li, Mohammed Aldosary, Mason Biggerstaff, Wei Yuan, Chad Warren, Yasuhiro Kodera, Javier E. Garay, Igor Barsukov, **g Shi

Abstract: Understanding and tailoring static and dynamic properties of magnetic insulator thin films is important for spintronic device applications. Here, we grow atomically flat epitaxial europium iron garnet (EuIG) thin films by pulsed laser deposition on (111)-oriented garnet substrates with a range of lattice parameters. By controlling the lattice mismatch between EuIG and the substrates, we tune the s… ▽ More Understanding and tailoring static and dynamic properties of magnetic insulator thin films is important for spintronic device applications. Here, we grow atomically flat epitaxial europium iron garnet (EuIG) thin films by pulsed laser deposition on (111)-oriented garnet substrates with a range of lattice parameters. By controlling the lattice mismatch between EuIG and the substrates, we tune the strain in EuIG films from compressive to tensile regime, which is characterized by X-ray diffraction. Using ferromagnetic resonance, we find that in addition to the first-order perpendicular magnetic anisotropy which depends linearly on the strain, there is a significant second-order one that has a quadratic strain dependence. Inhomogeneous linewidth of the ferromagnetic resonance increases notably with increasing strain, while the Gilbert dam** parameter remains nearly constant (~ 2x10^-2). These results provide valuable insight into the spin dynamics in ferrimagnetic insulators and useful guidance for material synthesis and engineering of next-generation spintronics applications. △ Less

Submitted 30 November, 2021; originally announced November 2021.

Bulk Polycrystalline Ceria Doped Al$_2$O$_3$ and YAG Ceramics for High-Power Density Laser-Driven Solid-State White Lighting: Effects of Crystallinity and Extreme Temperatures

Authors: E. H. Penilla, P. Sellappan, M. A. Duarte, A. T. Wieg, M. Wingert, J. E. Garay

Abstract: Here we develop and characterize high thermal conductivity/high thermal shock resistant bulk Ce doped Al2O3 and propose it as a new phosphor converting cap** layer for high-powered/high-brightness solid-state white lighting (SSWL). The bulk, dense Ce:Al2O3 ceramics have a 0.5 at.% Ce:Al concentration (significantly higher than the equilibrium solubility limit), and were produced using a simultan… ▽ More Here we develop and characterize high thermal conductivity/high thermal shock resistant bulk Ce doped Al2O3 and propose it as a new phosphor converting cap** layer for high-powered/high-brightness solid-state white lighting (SSWL). The bulk, dense Ce:Al2O3 ceramics have a 0.5 at.% Ce:Al concentration (significantly higher than the equilibrium solubility limit), and were produced using a simultaneous solid-state reactive Current Activated Pressure-Assisted Densification (CAPAD) approach. Ce:Al2O3 exhibits a broadband emission from 400-600nm, which encompasses the entire blue and green portions of the visible spectrum when pumped with ultra-violet (UV) light that is now commercially available in UV light emitting devices (LED) and laser diodes (LD). These broadband phosphors can be used in the commonly employed scheme of mixing with other UV converting cap** layers that emit red light to produce white light. Alternatively, they can be used in a novel composite down converter approach that ensures improved thermal-mechanical properties of the converting phosphor cap** layer. In this configuration Ce:Al2O3 is used with proven phosphor conversion materials such as Ce:YAG as an active encapsulant or as a cap** layer to produce SSWL with an improved bandwidth in the blue portion of the visible spectrum. In order to study the effect of crystallinity on the Ce PL emission, we synthesize Ce:YAG ceramics using high-pressure CAPAD at moderate temperatures to obtain varying crystallinity (amorphous through fully -crystalline). We investigate the PL characteristics of Ce:Al2O3 and Ce:YAG from 295K to 4K, revealing unique crystal field effects from the matrix on the Ce-dopants. The unique PL properties in conjunction with the superior thermal-mechanical properties of Ce:Al2O3 can be used in high-powered/high-brightness integrated devices based on high-efficiency UV-LD that do not suffer △ Less

Submitted 22 December, 2019; originally announced December 2019.

Comments: 26 pages, 7 figures

Systematic Control of Strain-Induced Perpendicular Magnetic Anisotropy in Epitaxial Europium and Terbium Iron Garnets Thin Films

Authors: Victor H. Ortiz, Mohammed Aldosary, Junxue Li, Yadong Xu, Mark I. Lohmann, Pathikumar Sellappan, Yasuhiro Kodera, Javier E. Garay, **g Shi

Abstract: We show tunable strain-induced perpendicular magnetic anisotropy (PMA) over a wide range of thicknesses in epitaxial ferrimagnetic insulator Eu3Fe5O12 (EuIG) and Tb3Fe5O12 (TbIG) thin films grown by pulsed-laser deposition on Gd3Ga5O12 with (001) and (111) orientations, respectively. The PMA field is determined by measuring the induced anomalous Hall loops in Pt deposited on the garnet films. Due… ▽ More We show tunable strain-induced perpendicular magnetic anisotropy (PMA) over a wide range of thicknesses in epitaxial ferrimagnetic insulator Eu3Fe5O12 (EuIG) and Tb3Fe5O12 (TbIG) thin films grown by pulsed-laser deposition on Gd3Ga5O12 with (001) and (111) orientations, respectively. The PMA field is determined by measuring the induced anomalous Hall loops in Pt deposited on the garnet films. Due to positive magnetostriction constants, compressive in-plane strain induces a PMA field as large as 32.9 kOe for 4 nm thick EuIG and 66.7 kOe for 5 nm thick TbIG at 300 K, and relaxes extremely slowly as the garnet film thickness increases. In bilayers consisting of Pt and EuIG or Pt and TbIG, robust PMA is revealed by squared anomalous Hall hysteresis loops in Pt, the magnitude of which appears to be only related to the net magnetic moment of iron sublattices. Furthermore, the magnetostriction constant is found to be 2.7x10^(-5) for EuIG and 1.35x10^(-5) for TbIG, comparable with the values for bulk crystals. Our results demonstrate a general approach of tailoring magnetic anisotropy of rare earth iron garnets by utilizing modulated strain via epitaxial growth. △ Less

Submitted 30 December, 2018; originally announced December 2018.

Journal ref: APL Materials 6, 121113 (2018)

Acoustic Phonon Dispersion Engineering in Bulk Crystals via Incorporation of Dopant Atoms

Authors: Fariborz Kargar, Elias H. Penilla, Ece Aytan, Jacob S. Lewis, Javier E. Garay, Alexander A. Balandin

Abstract: We report results of Brillouin - Mandelstam spectroscopy of transparent alumina crystals with Nd dopants. The ionic radius and atomic mass of Nd atoms are distinctively different from those of the host Al atoms. Our results show that even a small concentration of Nd atoms incorporated into the alumina samples produces a profound change in the acoustic phonon spectrum. The velocity of the transvers… ▽ More We report results of Brillouin - Mandelstam spectroscopy of transparent alumina crystals with Nd dopants. The ionic radius and atomic mass of Nd atoms are distinctively different from those of the host Al atoms. Our results show that even a small concentration of Nd atoms incorporated into the alumina samples produces a profound change in the acoustic phonon spectrum. The velocity of the transverse acoustic phonons decreases by ~600 m/s at the Nd density of only ~0.1 %. Interestingly, the decrease in the phonon frequency and velocity with the do** concentration is non-monotonic. The obtained results, demonstrating that modification of the acoustic phonon spectrum can be achieved not only by nanostructuring but also by do** have important implications for thermal management as well as thermoelectric and optoelectronic devices. △ Less

Submitted 23 March, 2018; originally announced March 2018.

Comments: 16 pages, 4 figures

Journal ref: Applied Physics Letters, 112, 191902 (2018)

Synthesis, processing and transport properties of cubic and trigonal solid solutions in the Mg-Si-Sn system

Authors: Pathikumar Sellappan, Anthony Y. Fong, Masayuki Murata, Yasuhiro Kodera, Javier E. Garay

Abstract: Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and… ▽ More Mg-Si-Sn solid solutions have interesting and useful semiconducting properties particularly for thermoelectric applications. While cubic solid solutions have been prepared by a variety of methods, solid solutions with a trigonal crystal structure have not been reported. We employed a combination of high energy ball milling and current activated pressure assisted densification (CAPAD) to induce and complete phase transformation from cubic to trigonal phase, forming dense trigonal composites. This is the first successful preparation of the trigonal phase in Mg-Si-Sn stem. In addition, we report the transport properties of both the cubic and trigonal composites measured in the 160 to 400 K range. The electrical conductivity of the trigonal composites was several times higher compared to the cubic counterparts while thermal conductivity is lower but in the range of previously reported Mg-Si-Sn materials. The Seebeck coefficient of the trigonal composites is lower compared to the cubic samples, leading to low ZT values. The ZT of the cubic samples, however is higher than previously reported for un-doped Mg-Si-Sn solid solutions which is promising for thermoelectric applications. △ Less

Submitted 9 November, 2017; originally announced November 2017.

Comments: 10 figures and 1 table

Journal ref: Journal of Alloys and Compounds (2018)

Magnetic and Thermal Transport Properties of Permanent Magnets with Anisotropic Grain Structure

Authors: A. D. Volodchenkov, S. Ramirez, R. Samnakay, R. Salgado, Y. Kodera, A. A. Balandin, J. E. Garay

Abstract: Nanostructured permanent magnets are gaining increasing interest and importance for applications such as generators and motors. Thermal management is a key concern since performance of permanent magnets decreases with temperature. We investigated the magnetic and thermal transport properties of rare-earth free nanostructured SrFe12O19 magnets produced by the current activated pressure assisted den… ▽ More Nanostructured permanent magnets are gaining increasing interest and importance for applications such as generators and motors. Thermal management is a key concern since performance of permanent magnets decreases with temperature. We investigated the magnetic and thermal transport properties of rare-earth free nanostructured SrFe12O19 magnets produced by the current activated pressure assisted densification. The synthesized magnets have aligned grains such that their magnetic easy axis is perpendicular to their largest surface area to maximize their magnetic performance. The SrFe12O19 magnets have fine grain sizes in the cross-plane direction and substantially larger grain sizes in the in-plane direction. It was found that this microstructure results in approximately a factor of two higher thermal conductivity in the in-plane direction, providing an opportunity for effective cooling. The phonons are the dominant heat carriers in this type of permanent magnets near room temperature. Temperature and direction dependent thermal conductivity measurements indicate that both Umklapp and grain boundary scattering are important in the in-plane direction, where the characteristic grain size is relatively large, while grain boundary scattering dominates the cross-plane thermal transport. The investigated nano/microstructural design strategy should translate well to other material systems and thus have important implications for thermal management of nanostructured permanent magnets. △ Less

Submitted 15 December, 2016; originally announced December 2016.

Comments: 16 pages, 5 figures

Journal ref: Materials and Design, 125, 62 (2017)

Thermal and Magnetic Properties of Nanostructured Ferrimagnetic Composites with Graphene - Graphite Fillers

Authors: S. Ramirez, K. Chan, R. Hernandez, E. Recinos, E. Hernandez, R. Salgado, A. G. Khitun, J. E. Garay, A. A. Balandin

Abstract: We report the results of an experimental study of thermal and magnetic properties of nanostructured ferrimagnetic iron oxide composites with graphene and graphite fillers synthesized via the current activated pressure assisted densification. The thermal conductivity was measured using the laser-flash and transient plane source techniques. It was demonstrated that addition of 5 wt. % of equal mixtu… ▽ More We report the results of an experimental study of thermal and magnetic properties of nanostructured ferrimagnetic iron oxide composites with graphene and graphite fillers synthesized via the current activated pressure assisted densification. The thermal conductivity was measured using the laser-flash and transient plane source techniques. It was demonstrated that addition of 5 wt. % of equal mixture of graphene and graphite flakes to the composite results in a factor of x2.6 enhancement of the thermal conductivity without significant degradation of the saturation magnetization. The microscopy and spectroscopic characterization reveal that sp2 carbon fillers preserve their crystal structure and morphology during the composite processing. The strong increase in the thermal conductivity was attributed to the excellent phonon heat conduction properties of graphene and graphite. The results are important for energy and electronic applications of the nanostructured permanent magnets. △ Less

Submitted 7 November, 2016; originally announced November 2016.

Comments: 22 pages, 5 figures

Journal ref: Materials and Design, 118, 75 (2017)

Anomalous Hall hysteresis in Tm3Fe5O12/Pt with strain-induced perpendicular magnetic anisotropy

Authors: Chi Tang, Pathikumar Sellappan, Yawen Liu, Yadong Xu, Javier E. Garay, **g Shi

Abstract: We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator Tm3Fe5O12 films grown with pulsed laser deposition on substituted-Gd3Ga5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room tempe… ▽ More We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator Tm3Fe5O12 films grown with pulsed laser deposition on substituted-Gd3Ga5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room temperature. When a thin Cu layer is inserted between Pt and TIG, the Hall hysteresis magnitude decays but stays finite as the thickness of Cu increases up to 5 nm. However, if the Cu layer is placed atop Pt instead, the Hall hysteresis magnitude is consistently larger than when the Cu layer with the same thickness is inserted in between for all Cu thicknesses. These results suggest that both the proximity-induced ferromagnetism and spin current contribute to the anomalous Hall effect. △ Less

Submitted 20 September, 2016; originally announced September 2016.

Synthesis of strontium ferrite/iron oxide exchange coupled nano-powders with improved energy product for rare earth free permanent magnet applications

Authors: A. D. Volodchenkov, Y. Kodera, J. E. Garay

Abstract: We present a simple, scalable synthesis route for producing exchange coupled soft/hard magnetic composite powder that outperforms pure soft and hard phase constituents. Importantly, the composites is iron oxide based (SrFe12O19 and Fe3O4) and contain no rare earth or precious metal. The two step synthesis process consists of first precipitating, an Iron oxide/hydroxide precursor directly on top of… ▽ More We present a simple, scalable synthesis route for producing exchange coupled soft/hard magnetic composite powder that outperforms pure soft and hard phase constituents. Importantly, the composites is iron oxide based (SrFe12O19 and Fe3O4) and contain no rare earth or precious metal. The two step synthesis process consists of first precipitating, an Iron oxide/hydroxide precursor directly on top of SrFe12O19 nano-flakes, ensuring a very fine degree of mixing between the hard and the soft magnetic phases. We then use a second step that serves to reduce the precursor to create the proper soft magnetic phase and create the intimate interface necessary for exchange coupling. We establish a clear processing window; at temperatures below this window the desired soft phase is not produced, while higher temperatures result in deleterious reaction at the soft/hard phase interfaces, causing an improper ratio of soft to hard phases. Improvements of Mr, Ms, and (BH)max are 42%, 29% and 37% respectively in the SrFe12O19/Fe3O4 composite compared to pure hard phase (SrFe12O19). We provide evidence of coupling (exchange spring behavior) with hysteresis curves, first order reversal curve (FORC) analysis and recoil measurements. △ Less

Submitted 19 July, 2016; originally announced July 2016.

Comments: in J. Mater. Chem. C, 2016

An integrated approach to doped thin films with strain tunable magnetic anisotropy: Powder synthesis, target preparation and pulsed laser deposition of Bi:YIG

Authors: Pathikumar Sellappan, Chi Tang, **g Shi, Javier E. Garay

Abstract: We present a synthesis/processing method for fabricating ferrimagnetic insulator (Bi-doped yttrium iron garnet) thin films with tunable magnetic anisotropy. Since the desired magnetic properties rely on controllable thickness and successful do**, we pay attention to the entire synthesis/processing procedure (nanopowder synthesis, nanocrystalline target preparation and pulsed laser deposition (PL… ▽ More We present a synthesis/processing method for fabricating ferrimagnetic insulator (Bi-doped yttrium iron garnet) thin films with tunable magnetic anisotropy. Since the desired magnetic properties rely on controllable thickness and successful do**, we pay attention to the entire synthesis/processing procedure (nanopowder synthesis, nanocrystalline target preparation and pulsed laser deposition (PLD)). Atomically flat films were deposited by PLD on (111)-orientated yttrium aluminum garnet. We show a significant enhancement of perpendicular anisotropy in the films, caused by strain-induced anisotropy. In addition, the perpendicular anisotropy is tunable by decreasing the film thickness and overwhelms the shape anisotropy at a critical thickness of 3.5 nm. △ Less

Submitted 14 July, 2016; v1 submitted 29 May, 2016; originally announced May 2016.

Comments: 13 pages, 4 figures. Accepted for publication in Materials Research Letters (2016)