-
Effects of surface treatments on flux tunable transmon qubits
Authors:
M. Mergenthaler,
C. Müller,
M. Ganzhorn,
S. Paredes,
P. Müller,
G. Salis,
V. P. Adiga,
M. Brink,
M. Sandberg,
J. B. Hertzberg,
S. Filipp,
A. Fuhrer
Abstract:
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been ide…
▽ More
One of the main limitations in state-of-the art solid-state quantum processors are qubit decoherence and relaxation due to noise in their local environment. For the field to advance towards full fault-tolerant quantum computing, a better understanding of the underlying microscopic noise sources is therefore needed. Adsorbates on surfaces, impurities at interfaces and material defects have been identified as sources of noise and dissipation in solid-state quantum devices. Here, we use an ultra-high vacuum package to study the impact of vacuum loading, UV-light exposure and ion irradiation treatments on coherence and slow parameter fluctuations of flux tunable superconducting transmon qubits. We analyse the effects of each of these surface treatments by comparing averages over many individual qubits and measurements before and after treatment. The treatments studied do not significantly impact the relaxation rate $Γ_1$ and the echo dephasing rate $Γ_2^\textrm{e}$, except for Ne ion bombardment which reduces $Γ_1$. In contrast, flux noise parameters are improved by removing magnetic adsorbates from the chip surfaces with UV-light and NH$_3$ treatments. Additionally, we demonstrate that SF$_6$ ion bombardment can be used to adjust qubit frequencies in-situ and post fabrication without affecting qubit coherence at the sweet spot.
△ Less
Submitted 14 March, 2021;
originally announced March 2021.
-
Characterization and tomography of a hidden qubit
Authors:
M. Pechal,
G. Salis,
M. Ganzhorn,
D. J. Egger,
M. Werninghaus,
S. Filipp
Abstract:
In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilitie…
▽ More
In circuit-based quantum computing, the available gate set typically consists of single-qubit gates acting on each individual qubit and at least one entangling gate between pairs of qubits. In certain physical architectures, however, some qubits may be 'hidden' and lacking direct addressability through dedicated control and readout lines, for instance because of limited on-chip routing capabilities, or because the number of control lines becomes a limiting factor for many-qubit systems. In this case, no single-qubit operations can be applied to the hidden qubits and their state cannot be measured directly. Instead, they may be controlled and read out only via single-qubit operations on connected 'control' qubits and a suitable set of two-qubit gates. We first discuss the impact of such restricted control capabilities on the quantum volume of specific qubit coupling networks. We then experimentally demonstrate full control and measurement capabilities in a superconducting two-qubit device with local single-qubit control and iSWAP and controlled-phase two-qubit interactions enabled by a tunable coupler. We further introduce an iterative tune-up process required to completely characterize the gate set used for quantum process tomography and evaluate the resulting gate fidelities.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Benchmarking the noise sensitivity of different parametric two-qubit gates in a single superconducting quantum computing platform
Authors:
M. Ganzhorn,
G. Salis,
D. J. Egger,
A. Fuhrer,
M. Mergenthaler,
C. Müller,
P. Müller,
S. Paredes,
M. Pechal,
M. Werninghaus,
S. Filipp
Abstract:
The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven…
▽ More
The possibility to utilize different types of two-qubit gates on a single quantum computing platform adds flexibility in the decomposition of quantum algorithms. A larger hardware-native gate set may decrease the number of required gates, provided that all gates are realized with high fidelity. Here, we benchmark both controlled-Z (CZ) and exchange-type (iSWAP) gates using a parametrically driven tunable coupler that mediates the interaction between two superconducting qubits. Using randomized benchmarking protocols we estimate an error per gate of $0.9\pm0.03\%$ and $1.3\pm0.4\%$ fidelity for the CZ and the iSWAP gate, respectively. We argue that spurious $ZZ$-type couplings are the dominant error source for the iSWAP gate, and that phase stability of all microwave drives is of utmost importance. Such differences in the achievable fidelities for different two-qubit gates have to be taken into account when map** quantum algorithms to real hardware.
△ Less
Submitted 14 May, 2020; v1 submitted 12 May, 2020;
originally announced May 2020.
-
Time-resolved tomography of a driven adiabatic quantum simulation
Authors:
Gian Salis,
Nikolaj Moll,
Marco Roth,
Marc Ganzhorn,
Stefan Filipp
Abstract:
A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotat…
▽ More
A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotating frame of two superconducting qubits, including longitudinal and transverse fields and iSWAP-type two-qubit interactions. The evolution of each eigenstate is tracked using time-resolved state tomography. The energy gaps between instantaneous eigenstates are chosen such that depending on the energy transition rate either diabatic or adiabatic passages are observed in the measured energies and correlators. Errors in the obtained energy values induced by finite $T_1$ and $T_2$ times of the qubits are mitigated by extrapolation to short protocol times.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Gate-efficient simulation of molecular eigenstates on a quantum computer
Authors:
Marc Ganzhorn,
Daniel J. Egger,
Panagiotis Kl. Barkoutsos,
Pauline Ollitrault,
Gian Salis,
Nikolaj Moll,
Andreas Fuhrer,
Peter Mueller,
Stefan Woerner,
Ivano Tavernelli,
Stefan Filipp
Abstract:
A key requirement to perform simulations of large quantum systems on near-term quantum hardware is the design of quantum algorithms with short circuit depth that finish within the available coherence time. A way to stay within the limits of coherence is to reduce the number of gates by implementing a gate set that matches the requirements of the specific algorithm of interest directly in hardware.…
▽ More
A key requirement to perform simulations of large quantum systems on near-term quantum hardware is the design of quantum algorithms with short circuit depth that finish within the available coherence time. A way to stay within the limits of coherence is to reduce the number of gates by implementing a gate set that matches the requirements of the specific algorithm of interest directly in hardware. Here, we show that exchange-type gates are a promising choice for simulating molecular eigenstates on near-term quantum devices since these gates preserve the number of excitations in the system. Complementing the theoretical work by Barkoutsos et al. [PRA 98, 022322 (2018)], we report on the experimental implementation of a variational algorithm on a superconducting qubit platform to compute the eigenstate energies of molecular hydrogen. We utilize a parametrically driven tunable coupler to realize exchange-type gates that are configurable in amplitude and phase on two fixed-frequency superconducting qubits. With gate fidelities around 95% we are able to compute the eigenstates within an accuracy of 50 mHartree on average, a limit set by the coherence time of the tunable coupler.
△ Less
Submitted 13 September, 2018;
originally announced September 2018.
-
Local control theory for superconducting qubits
Authors:
M. Malis,
P. Kl. Barkoutsos,
M. Ganzhorn,
S. Filipp,
D. J. Egger,
S. Bonella,
I. Tavernelli
Abstract:
In this work, we develop a method to design control pulses for fixed-frequency superconducting qubits coupled via tunable couplers based on local control theory, an approach commonly employed to steer chemical reactions. Local control theory provides an algorithm for the monotonic population transfer from a selected initial state to a desired final state of a quantum system through the on-the-fly…
▽ More
In this work, we develop a method to design control pulses for fixed-frequency superconducting qubits coupled via tunable couplers based on local control theory, an approach commonly employed to steer chemical reactions. Local control theory provides an algorithm for the monotonic population transfer from a selected initial state to a desired final state of a quantum system through the on-the-fly sha** of an external pulse. The method, which only requires a unique forward time-propagation of the system wavefunction, can serve as starting point for additional refinements that lead to new pulses with improved properties. Among others, we propose an algorithm for the design of pulses that can transfer population in a reversible manner between given initial and final states of coupled fixed-frequency superconducting qubits.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.
-
Adiabatic quantum simulations with driven superconducting qubits
Authors:
Marco Roth,
Nikolaj Moll,
Gian Salis,
Marc Ganzhorn,
Daniel J. Egger,
Stefan Filipp,
Sebastian Schmidt
Abstract:
We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a polychromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multi-qubit Hamiltonian which features independently tunable $XX$ and $YY$-type interactions as well as local bias fields over…
▽ More
We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a polychromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multi-qubit Hamiltonian which features independently tunable $XX$ and $YY$-type interactions as well as local bias fields over a large parameter range. We demonstrate the adiabatic simulation of the ground state of a hydrogen molecule using two superconducting qubits and one tunable bus element. The time required to reach chemical accuracy lies in the few microsecond range and therefore could be implemented on currently available superconducting circuits. Further applications of this technique may also be found in the simulation of interacting spin systems.
△ Less
Submitted 21 August, 2018; v1 submitted 14 August, 2018;
originally announced August 2018.
-
Quantum algorithms for electronic structure calculations: particle/hole Hamiltonian and optimized wavefunction expansions
Authors:
Panagiotis Kl. Barkoutsos,
Jerome F. Gonthier,
Igor Sokolov,
Nikolaj Moll,
Gian Salis,
Andreas Fuhrer,
Marc Ganzhorn,
Daniel J. Egger,
Matthias Troyer,
Antonio Mezzacapo,
Stefan Filipp,
Ivano Tavernelli
Abstract:
In this work we investigate methods to improve the efficiency and scalability of quantum algorithms for quantum chemistry applications. We propose a transformation of the electronic structure Hamiltonian in the second quantization framework into the particle-hole (p/h) picture, which offers a better starting point for the expansion of the trial wavefunction. The state of the molecular system at st…
▽ More
In this work we investigate methods to improve the efficiency and scalability of quantum algorithms for quantum chemistry applications. We propose a transformation of the electronic structure Hamiltonian in the second quantization framework into the particle-hole (p/h) picture, which offers a better starting point for the expansion of the trial wavefunction. The state of the molecular system at study is parametrized in a way to efficiently explore the sector of the molecular Fock space that contains the desired solution. To this end, we explore several trial wavefunctions to identify the most efficient parameterization of the molecular ground state. Taking advantage of known post-Hartree Fock quantum chemistry approaches and heuristic Hilbert space search quantum algorithms, we propose a new family of quantum circuits based on exchange-type gates that enable accurate calculations while kee** the gate count (i.e., the circuit depth) low. The particle-hole implementation of the Unitary Coupled Cluster (UCC) method within the Variational Quantum Eigensolver approach gives rise to an efficient quantum algorithm, named q-UCC , with important advantages compared to the straightforward 'translation' of the classical Coupled Cluster counterpart. In particular, we show how a single Trotter step can accurately and efficiently reproduce the ground state energies of simple molecular systems.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Entanglement generation in superconducting qubits using holonomic operations
Authors:
Daniel J. Egger,
Marc Ganzhorn,
Gian Salis,
Andreas Fuhrer,
Peter Mueller,
Panagiotis Kl. Barkoutsos,
Nikolaj Moll,
Ivano Tavernelli,
Stefan Filipp
Abstract:
We investigate a non-adiabatic holonomic operation that enables us to entangle two fixed-frequency superconducting transmon qubits attached to a common bus resonator. Two coherent microwave tones are applied simultaneously to the two qubits and drive transitions between the first excited resonator state and the second excited state of each qubit. The cyclic evolution within this effective 3-level…
▽ More
We investigate a non-adiabatic holonomic operation that enables us to entangle two fixed-frequency superconducting transmon qubits attached to a common bus resonator. Two coherent microwave tones are applied simultaneously to the two qubits and drive transitions between the first excited resonator state and the second excited state of each qubit. The cyclic evolution within this effective 3-level $Λ$-system gives rise to a holonomic operation entangling the two qubits. Two-qubit states with 95\% fidelity, limited mainly by charge-noise of the current device, are created within $213~\rm{ns}$. This scheme is a step toward implementing a SWAP-type gate directly in an all-microwave controlled hardware platform. By extending the available set of two-qubit operations in the fixed-frequency qubit architecture, the proposed scheme may find applications in near-term quantum applications using variational algorithms to efficiently create problem-specific trial states.
△ Less
Submitted 13 April, 2018;
originally announced April 2018.
-
Pulsed reset protocol for fixed-frequency superconducting qubits
Authors:
Daniel J. Egger,
Max Werninghaus,
Marc Ganzhorn,
Gian Salis,
Andreas Fuhrer,
Peter Mueller,
Stefan Filipp
Abstract:
Improving coherence times of quantum bits is a fundamental challenge in the field of quantum computing. With long-lived qubits it becomes, however, inefficient to wait until the qubits have relaxed to their ground state after completion of an experiment. Moreover, for error-correction schemes it is import to rapidly re-initialize ancilla parity-check qubits. We present a simple pulsed qubit reset…
▽ More
Improving coherence times of quantum bits is a fundamental challenge in the field of quantum computing. With long-lived qubits it becomes, however, inefficient to wait until the qubits have relaxed to their ground state after completion of an experiment. Moreover, for error-correction schemes it is import to rapidly re-initialize ancilla parity-check qubits. We present a simple pulsed qubit reset protocol based on a two-pulse sequence. A first pulse transfers the excited state population to a higher excited qubit state and a second pulse into a lossy environment provided by a low-Q transmission line resonator, which is also used for qubit readout. We show that the remaining excited state population can be suppressed to $2.2\pm0.8\%$ and utilize the pulsed reset protocol to carry out experiments at enhanced rates.
△ Less
Submitted 1 April, 2019; v1 submitted 25 February, 2018;
originally announced February 2018.
-
Advanced Fabrication of Single-crystal Diamond Membranes for Quantum Technologies
Authors:
Michel Challier,
Selda Sonusen,
Arne Barfuss,
Dominik Rohner,
Daniel Riedel,
Johannes Koelbl,
Marc Ganzhorn,
Patrick Appel,
Patrick Maletinsky,
Elke Neu
Abstract:
Many promising applications of single crystal diamond and its color centers as sensor platform and in photonics require free-standing membranes with a thickness ranging from several micrometers to the few 100 nm range. In this work, we present an approach to conveniently fabricate such thin membranes with up to about one millimeter in size. We use commercially available diamond plates (thickness 5…
▽ More
Many promising applications of single crystal diamond and its color centers as sensor platform and in photonics require free-standing membranes with a thickness ranging from several micrometers to the few 100 nm range. In this work, we present an approach to conveniently fabricate such thin membranes with up to about one millimeter in size. We use commercially available diamond plates (thickness 50 $μ$m) in an inductively coupled reactive ion etching process which is based on argon, oxygen and SF$_6$. We thus avoid using toxic, corrosive feed gases and add an alternative to previously presented recipes involving chlorine-based etching steps. Our membranes are smooth (RMS roughness <1 nm) and show moderate thickness variation (central part: <1 $μ$m over $\approx \,$200x200 $μ$m$^2$). Due to an improved etch mask geometry, our membranes stay reliably attached to the diamond plate in our chlorine-based as well as SF$_6$-based processes. Our results thus open the route towards higher reliability in diamond device fabrication and up-scaling.
△ Less
Submitted 22 March, 2018; v1 submitted 25 February, 2018;
originally announced February 2018.
-
Quantum optimization using variational algorithms on near-term quantum devices
Authors:
Nikolaj Moll,
Panagiotis Barkoutsos,
Lev S. Bishop,
Jerry M. Chow,
Andrew Cross,
Daniel J. Egger,
Stefan Filipp,
Andreas Fuhrer,
Jay M. Gambetta,
Marc Ganzhorn,
Abhinav Kandala,
Antonio Mezzacapo,
Peter Müller,
Walter Riess,
Gian Salis,
John Smolin,
Ivano Tavernelli,
Kristan Temme
Abstract:
Universal fault-tolerant quantum computers will require error-free execution of long sequences of quantum gate operations, which is expected to involve millions of physical qubits. Before the full power of such machines will be available, near-term quantum devices will provide several hundred qubits and limited error correction. Still, there is a realistic prospect to run useful algorithms within…
▽ More
Universal fault-tolerant quantum computers will require error-free execution of long sequences of quantum gate operations, which is expected to involve millions of physical qubits. Before the full power of such machines will be available, near-term quantum devices will provide several hundred qubits and limited error correction. Still, there is a realistic prospect to run useful algorithms within the limited circuit depth of such devices. Particularly promising are optimization algorithms that follow a hybrid approach: the aim is to steer a highly entangled state on a quantum system to a target state that minimizes a cost function via variation of some gate parameters. This variational approach can be used both for classical optimization problems as well as for problems in quantum chemistry. The challenge is to converge to the target state given the limited coherence time and connectivity of the qubits. In this context, the quantum volume as a metric to compare the power of near-term quantum devices is discussed.
With focus on chemistry applications, a general description of variational algorithms is provided and the map** from fermions to qubits is explained. Coupled-cluster and heuristic trial wave-functions are considered for efficiently finding molecular ground states. Furthermore, simple error-mitigation schemes are introduced that could improve the accuracy of determining ground-state energies. Advancing these techniques may lead to near-term demonstrations of useful quantum computation with systems containing several hundred qubits.
△ Less
Submitted 9 October, 2017; v1 submitted 3 October, 2017;
originally announced October 2017.
-
Analysis of parametrically driven exchange-type (iSWAP) and two-photon (bSWAP) interactions between superconducting qubits
Authors:
Marco Roth,
Marc Ganzhorn,
Nikolaj Moll,
Stefan Filipp,
Gian Salis,
Sebastian Schmidt
Abstract:
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two and more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we study theoretically and ex…
▽ More
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two and more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we study theoretically and experimentally a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swap** excitations between the qubits (iSWAP) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bSWAP). We find that the bSWAP gate is generally slower than the more commonly used iSWAP gate, but features favorable scalability properties with less severe frequency crowding effects, which typically degrade the fidelity in multi-qubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.
△ Less
Submitted 7 August, 2017;
originally announced August 2017.
-
Fabrication of all diamond scanning probes for nanoscale magnetometry
Authors:
Patrick Appel,
Elke Neu,
Marc Ganzhorn,
Arne Barfuss,
Marietta Batzer,
Micha Gratz,
Andreas Tschöpe,
Patrick Maletinsky
Abstract:
The electronic spin of the nitrogen vacancy (NV) center in diamond forms an atomically sized, highly sensitive sensor for magnetic fields. To harness the full potential of individual NV centers for sensing with high sensitivity and nanoscale spatial resolution, NV centers have to be incorporated into scanning probe structures enabling controlled scanning in close proximity to the sample surface. H…
▽ More
The electronic spin of the nitrogen vacancy (NV) center in diamond forms an atomically sized, highly sensitive sensor for magnetic fields. To harness the full potential of individual NV centers for sensing with high sensitivity and nanoscale spatial resolution, NV centers have to be incorporated into scanning probe structures enabling controlled scanning in close proximity to the sample surface. Here, we present an optimized procedure to fabricate single-crystal, all-diamond scanning probes starting from commercially available diamond and show a highly efficient and robust approach for integrating these devices in a generic atomic force microscope. Our scanning probes consisting of a scanning nanopillar (200 nm diameter, $1-2\,μ$m length) on a thin ($< 1μ$m) cantilever structure, enable efficient light extraction from diamond in combination with a high magnetic field sensitivity ($\mathrm{η_{AC}}\approx50\pm20\,\mathrm{nT}/\sqrt{\mathrm{Hz}}$). As a first application of our scanning probes, we image the magnetic stray field of a single Ni nanorod. We show that this stray field can be approximated by a single dipole and estimate the NV-to-sample distance to a few tens of nanometer, which sets the achievable resolution of our scanning probes.
△ Less
Submitted 31 March, 2016;
originally announced April 2016.
-
Quantitative nanoscale vortex-imaging using a cryogenic quantum magnetometer
Authors:
Lucas Thiel,
Dominik Rohner,
Marc Ganzhorn,
Patrick Appel,
Elke Neu,
Benedikt Müller,
Reinhold Kleiner,
Dieter Koelle,
Patrick Maletinsky
Abstract:
Microscopic studies of superconductors and their vortices play a pivotal role in our understanding of the mechanisms underlying superconductivity. Local measurements of penetration depths or magnetic stray-fields enable access to fundamental aspects of superconductors such as nanoscale variations of superfluid densities or the symmetry of their order parameter. However, experimental tools, which o…
▽ More
Microscopic studies of superconductors and their vortices play a pivotal role in our understanding of the mechanisms underlying superconductivity. Local measurements of penetration depths or magnetic stray-fields enable access to fundamental aspects of superconductors such as nanoscale variations of superfluid densities or the symmetry of their order parameter. However, experimental tools, which offer quantitative, nanoscale magnetometry and operate over the large range of temperature and magnetic fields relevant to address many outstanding questions in superconductivity, are still missing. Here, we demonstrate quantitative, nanoscale magnetic imaging of Pearl vortices in the cuprate superconductor YBCO, using a scanning quantum sensor in form of a single Nitrogen-Vacancy (NV) electronic spin in diamond. The sensor-to-sample distance of ~10nm we achieve allows us to observe striking deviations from the prevalent monopole approximation in our vortex stray-field images, while we find excellent quantitative agreement with Pearl's analytic model. Our experiments yield a non-invasive and unambiguous determination of the system's local London penetration depth, and are readily extended to higher temperatures and magnetic fields. These results demonstrate the potential of quantitative quantum sensors in benchmarking microscopic models of complex electronic systems and open the door for further exploration of strongly correlated electron physics using scanning NV magnetometry.
△ Less
Submitted 9 November, 2015;
originally announced November 2015.
-
Nanoscale microwave imaging with a single electron spin in diamond
Authors:
Patrick Appel,
Marc Ganzhorn,
Elke Neu,
Patrick Maletinsky
Abstract:
We report on imaging of microwave (MW) magnetic fields using a magnetometer based on the electron spin of a nitrogen vacancy center in diamond. We quantitatively image the magnetic field generated by high frequency (GHz) MW current with nanoscale resolution using a scanning probe technique. We demonstrate a MW magnetic field sensitivity in the range of a few nT/$\sqrt{\text{Hz}}$, polarization sel…
▽ More
We report on imaging of microwave (MW) magnetic fields using a magnetometer based on the electron spin of a nitrogen vacancy center in diamond. We quantitatively image the magnetic field generated by high frequency (GHz) MW current with nanoscale resolution using a scanning probe technique. We demonstrate a MW magnetic field sensitivity in the range of a few nT/$\sqrt{\text{Hz}}$, polarization selection and broadband capabilities under ambient conditions and thereby establish the nitrogen vacancy center a versatile and high performance tool for the detection of MW fields. As a first application of this scanning MW detector, we determine the MW current density in a stripline and demonstrate a MW current sensitivity of a few nA/$\sqrt{\text{Hz}}$
△ Less
Submitted 13 November, 2015; v1 submitted 11 August, 2015;
originally announced August 2015.
-
A low-loss, broadband antenna for efficient photon collection from a coherent spin in diamond
Authors:
D. Riedel,
D. Rohner,
M. Ganzhorn,
T. Kaldewey,
P. Appel,
E. Neu,
R. J. Warburton,
P. Maletinsky
Abstract:
We report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid-state. The device, the first solid-state realization of a dielectric antenna, is engineered for individual nitrogen vacancy (NV) electronic spins in diamond. We demonstrate a directionality close to 10. The photonic structure preserves the high spin coherence of si…
▽ More
We report the creation of a low-loss, broadband optical antenna giving highly directed output from a coherent single spin in the solid-state. The device, the first solid-state realization of a dielectric antenna, is engineered for individual nitrogen vacancy (NV) electronic spins in diamond. We demonstrate a directionality close to 10. The photonic structure preserves the high spin coherence of single crystal diamond (T2>100us). The single photon count rate approaches a MHz facilitating efficient spin readout. We thus demonstrate a key enabling technology for quantum applications such as high-sensitivity magnetometry and long-distance spin entanglement.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
Photonic nano-structures on (111) oriented diamond
Authors:
Elke Neu,
Patrick Appel,
Marc Ganzhorn,
Javier Miguel-Sanchez,
Margarita Lesik,
Vianney Mille,
Vincent Jacques,
Alexandre Tallaire,
Jocelyn Achard,
Patrick Maletinsky
Abstract:
We demonstrate the fabrication of single-crystalline diamond nanopillars on a (111)-oriented chemical vapor deposited diamond substrate. This crystal orientation offers optimal coupling of nitrogen-vacancy (NV) center emission to the nanopillar mode and is thus advantageous over previous approaches. We characterize single native NV centers in these nanopillars and find one of the highest reported…
▽ More
We demonstrate the fabrication of single-crystalline diamond nanopillars on a (111)-oriented chemical vapor deposited diamond substrate. This crystal orientation offers optimal coupling of nitrogen-vacancy (NV) center emission to the nanopillar mode and is thus advantageous over previous approaches. We characterize single native NV centers in these nanopillars and find one of the highest reported saturated fluorescence count rates in single crystalline diamond in excess of 10${}^6$ counts per second. We show that our nano-fabrication procedure conserves the preferential alignment as well as the spin coherence of the NVs in our structures. Our results will enable a new generation of highly sensitive probes for NV magnetometry and pave the way toward photonic crystals with optimal orientation of the NV center's emission dipole.
△ Less
Submitted 24 March, 2014;
originally announced March 2014.
-
Dynamics and Dissipation induced by Single-Electron Tunneling in Carbon Nanotube Nanoelectromechanical Systems
Authors:
Marc Ganzhorn,
Wolfgang Wernsdorfer
Abstract:
We demonstrate the effect of single-electron tunneling (SET) through a carbon nanotube quantum dot on its nanomechanical motion. We find that the frequency response and the dissipation of the nanoelectromechanical system (NEMS) to SET strongly depends on the electronic environment of the quantum dot, in particular on the total dot capacitance and the tunnel coupling to the metal contacts. Our find…
▽ More
We demonstrate the effect of single-electron tunneling (SET) through a carbon nanotube quantum dot on its nanomechanical motion. We find that the frequency response and the dissipation of the nanoelectromechanical system (NEMS) to SET strongly depends on the electronic environment of the quantum dot, in particular on the total dot capacitance and the tunnel coupling to the metal contacts. Our findings suggest that one could achieve quality factors of 10$^{6}$ or higher by choosing appropriate gate dielectrics and/or by improving the tunnel coupling to the leads.
△ Less
Submitted 9 May, 2012;
originally announced May 2012.
