-
A low repetition rate optical frequency comb
Authors:
Francesco Canella,
Johannes Weitenberg,
Muhammad Thariq,
Fabian Schmid,
Paras Dwivedi,
Gianluca Galzerano,
Theodor W. Haensch,
Thomas Udem,
Akira Ozawa
Abstract:
Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength range, for example into the extreme ultraviolet (XUV). The resulting spectrally dense frequency comb can still be used for precision spectroscopy of narrow atomic o…
▽ More
Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength range, for example into the extreme ultraviolet (XUV). The resulting spectrally dense frequency comb can still be used for precision spectroscopy of narrow atomic or molecular transitions. In this article, we demonstrate a low-noise infrared frequency comb with a repetition rate as low as 40 kHz using a Yb:KYW mode-locked laser, pulse picking, and subsequent amplification. The frequency comb structure is confirmed by generating a beat note with a continuous wave reference laser. A comb mode is actively stabilized to the reference laser, and the integrated rms phase noise from 20 Hz to 20 kHz is measured to be 195 mrad.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Low frequency-to-intensity noise conversion in a pulsed laser cavity locking by exploiting Carrier-Envelope Offset manipulation
Authors:
Francesco Canella,
Edoardo Suerra,
Dario Giannotti,
Gianluca Galzerano,
Simone Cialdi
Abstract:
We report on the dependence of the frequency-to-intensity noise conversion in the locking of an ultrafast laser against a high-finesse optical resonator from the Carrier Envelope Offset (CEO) frequency. By a proper combination of the cavity finesse and laser CEO frequency it is possible to optimize the signal-to-noise ratio of the laser intensity trapped into the optical resonator. The theoretical…
▽ More
We report on the dependence of the frequency-to-intensity noise conversion in the locking of an ultrafast laser against a high-finesse optical resonator from the Carrier Envelope Offset (CEO) frequency. By a proper combination of the cavity finesse and laser CEO frequency it is possible to optimize the signal-to-noise ratio of the laser intensity trapped into the optical resonator. The theoretical description of the problem together with the numerical simulations and experimental results are presented with the aim of a strong suppression of the intensity fluctuations of the trapped laser field.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Realization and characterization of a low intensity noise ultrafast Yb-doped fiber amplifier
Authors:
Francesco Canella,
Lisa Marta Molteni,
Simone Cialdi,
Paolo Laporta,
Nicola Coluccelli,
Gianluca Galzerano
Abstract:
We report on the design and whole characterization of low-noise and affordable-cost Yb-doped double-clad fiber amplifiers operating at room temperature in the near-infrared spectral region at pulse repetition rate of 160 MHz. Two different experimental configurations are discussed. In the first one, a broadband seed radiation with a transform limited pulse duration of 71 fs, an optical spectrum of…
▽ More
We report on the design and whole characterization of low-noise and affordable-cost Yb-doped double-clad fiber amplifiers operating at room temperature in the near-infrared spectral region at pulse repetition rate of 160 MHz. Two different experimental configurations are discussed. In the first one, a broadband seed radiation with a transform limited pulse duration of 71 fs, an optical spectrum of 20 nm wide at around 1040 nm, and 20 mW average power is adopted. In the second configuration, the seed radiation is constituted by stretched pulses with a time duration as long as 170 ps, with a 5-nm narrow pulse spectrum centered at 1029 nm and 2 mW average input power. In both cases we obtained transform limited pulse trains with an amplified output power exceeding 2 W. Furthermore, relative intensity noise measurements show that no significant noise degradation occurs during the amplification process.
△ Less
Submitted 14 May, 2021;
originally announced May 2021.
-
A new method for spatial mode shifting of a stabilized optical cavity for the generation of dual-color X-rays
Authors:
Edoardo Suerra,
Dario Giannotti,
Francesco Canella,
Stefano Capra,
Daniele Cipriani,
Giovanni Mettivier,
Gianluca Galzerano,
Paolo Cardarelli,
Simone Cialdi,
Luca Serafini
Abstract:
We propose an innovative method to shift the transversal position of the focal point of an optical cavity kee** it actively stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of $135 μm$ in a time…
▽ More
We propose an innovative method to shift the transversal position of the focal point of an optical cavity kee** it actively stabilized. Our cavity is a 4 mirrors bow-tie cavity and the spatial shift of the resonant mode is obtained by properly rotating the two curved mirrors by piezo actuators. This method allows us to move the transversal position of the cavity focal point of $135 μm$ in a time of $50 ms$, kee** the resonance condition of the cavity by means of the Pound-Drever-Hall technique. We propose to use this technique for the generation of 2-color X-rays via Inverse Compton Scattering (ICS). This technique exploits the large average power stored in the high finesse cavity by shifting the laser beam with respect to the electron beam trajectory, hence controlling the spatial superposition of the electron and photon beams in the interaction region. Arranging two cavities assembled one on top of the other, with different collision angle with the electron beam, allows the generation of X-ray bursts of different energies just by swiftly moving the two cavities, switching the two focal points onto the electron beam trajectory, thus activating in sequence two different ICS spectral lines.
△ Less
Submitted 9 March, 2021;
originally announced March 2021.
-
Femtosecond laser written diamond waveguides - a step towards integrated photonics in the far infrared
Authors:
Vibhav Bharadwaj,
Yuchen Wang,
Toney Teddy Fernandez,
Roberta Ramponi,
Shane M. Eaton,
Gianluca Galzerano
Abstract:
A first demonstration and complete characterization of mid-infrared waveguides in diamond are reported in detail. Waveguides were designed for 2.4 um and 8.6 um waveguiding, with their group velocity dispersion was analyzed using femtosecond pulses at 2.4 um wavelength propagated through the waveguide and the bulk substrate. The total dispersion was found to be dominated by the bulk material rathe…
▽ More
A first demonstration and complete characterization of mid-infrared waveguides in diamond are reported in detail. Waveguides were designed for 2.4 um and 8.6 um waveguiding, with their group velocity dispersion was analyzed using femtosecond pulses at 2.4 um wavelength propagated through the waveguide and the bulk substrate. The total dispersion was found to be dominated by the bulk material rather than the waveguide, and was on the range of 275 fs2/mm, demonstrating that femtosecond laser written modifications in diamond introduce negligible perturbations to the intrinsic material.
△ Less
Submitted 28 June, 2018; v1 submitted 14 June, 2018;
originally announced June 2018.
-
Femtosecond laser inscription of Bragg grating waveguides in bulk diamond
Authors:
V. Bharadwaj,
A. Courvoisier,
T. T. Fernandez,
R. Ramponi,
G. Galzerano,
J. Nunn,
M. J. Booth,
R. Osellame,
S. M. Eaton,
P. S. Salter
Abstract:
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating.…
▽ More
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating. This fabrication technology opens the way towards advanced 3D photonic networks in diamond for a range of applications.
△ Less
Submitted 1 September, 2017; v1 submitted 29 May, 2017;
originally announced May 2017.
-
Diamond photonics platform enabled by femtosecond laser writing
Authors:
Belen Sotillo,
Vibhav Bharadwaj,
J. P. Hadden,
Masaaki Sakakura,
Andrea Chiappini,
Toney Teddy Fernandez,
Stefano Longhi,
Ottavia Jedrkiewicz,
Yasuhiko Shimotsuma,
Luigino Criante,
Roberto Osellame,
Gianluca Galzerano,
Maurizio Ferrari,
Kiyotaka Miura,
Roberta Ramponi,
Paul E. Barclay,
Shane Michael Eaton
Abstract:
We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems.
We demonstrate the first buried optical waveguides in diamond using focused femtosecond laser pulses. The properties of nitrogen vacancy centers are preserved in the waveguides, making them promising for diamond-based magnetometers or quantum information systems.
△ Less
Submitted 21 October, 2016; v1 submitted 6 May, 2016;
originally announced May 2016.
-
Scanning micro-resonator direct-comb absolute spectroscopy
Authors:
Alessio Gambetta,
Marco Cassinerio,
Davide Gatti,
Paolo Laporta,
Gianluca Galzerano
Abstract:
Direct optical frequency Comb Spectroscopy (DCS) is proving to be a fundamental tool in many areas of science and technology thanks to its unique performance in terms of ultra-broadband, high-speed detection and frequency accuracy, allowing for high-fidelity map** of atomic and molecular energy structure. Here we present a novel DCS approach based on a scanning Fabry-Perot micro-cavity resonator…
▽ More
Direct optical frequency Comb Spectroscopy (DCS) is proving to be a fundamental tool in many areas of science and technology thanks to its unique performance in terms of ultra-broadband, high-speed detection and frequency accuracy, allowing for high-fidelity map** of atomic and molecular energy structure. Here we present a novel DCS approach based on a scanning Fabry-Perot micro-cavity resonator (SMART) providing a simple, compact and accurate method to resolve the mode structure of an optical frequency comb. The SMART approach, while drastically reducing system complexity, allows for a straightforward absolute calibration of the optical-frequency axis with an ultimate resolution limited by the micro-resonator resonance linewidth and can be used in any spectral region from XUV to THz. An application to high-precision spectroscopy of acetylene at 1.54 um is presented, demonstrating frequency resolution as low as 20 MHz with a single-scan optical bandwidth up to 1 THz in 20-ms measurement time and a noise-equivalent-absorption level per comb mode of 2.7 10^-9 cm^-1 Hz^(-1/2). Using higher finesse micro-resonators along with an enhancement cavity, this technique has the potential to improve by more than one order of magnitude the noise equivalent absorption in a multiterahertz spectral interval with unchanged frequency resolution.
△ Less
Submitted 27 April, 2016;
originally announced April 2016.
-
250-MHz synchronously pumped optical parametric oscillator at 2.25-2.6 μm and 4.1-4.9 μm
Authors:
Nicola Coluccelli,
Helge Fonnum,
Magnus Haakestad,
Alessio Gambetta,
Davide Gatti,
Marco Marangoni,
Paolo Laporta,
Gianluca Galzerano
Abstract:
A compact and versatile femtosecond mid-IR source is presented, based on an optical parametric oscillator (OPO) synchronously pumped by a commercial 250-MHz Er:fiber laser. The mid-IR spectrum can be tuned in the range 2.25-2.6 μm (signal) and 4.1-4.9 μm (idler), with average power from 20 to 60 mW. At 2.5 μm a minimum pulse duration of 110 fs and a power of 40 mW have been obtained. Active stabil…
▽ More
A compact and versatile femtosecond mid-IR source is presented, based on an optical parametric oscillator (OPO) synchronously pumped by a commercial 250-MHz Er:fiber laser. The mid-IR spectrum can be tuned in the range 2.25-2.6 μm (signal) and 4.1-4.9 μm (idler), with average power from 20 to 60 mW. At 2.5 μm a minimum pulse duration of 110 fs and a power of 40 mW have been obtained. Active stabilization of the OPO cavity length has been achieved in the whole tuning range.
△ Less
Submitted 4 July, 2012;
originally announced July 2012.
-
Primary gas thermometry by means of laser-absorption spectroscopy: Determination of the Boltzmann constant
Authors:
G. Casa,
A. Castrillo,
G. Galzerano,
R. Wehr,
A. Merlone,
D. Di Serafino,
P. Laporta,
L. Gianfrani
Abstract:
We report on a new optical implementation of primary gas thermometry based on laser absorption spectrometry in the near infrared. The method consists in retrieving the Doppler broadening from highly accurate observations of the line shape of the R(12) $ν_{1} + 2 ν_{2}^{\phantom{1}0} + ν_{3}$ transition in CO$_{2}$ gas at thermodynamic equilibrium. Doppler width measurements as a function of gas…
▽ More
We report on a new optical implementation of primary gas thermometry based on laser absorption spectrometry in the near infrared. The method consists in retrieving the Doppler broadening from highly accurate observations of the line shape of the R(12) $ν_{1} + 2 ν_{2}^{\phantom{1}0} + ν_{3}$ transition in CO$_{2}$ gas at thermodynamic equilibrium. Doppler width measurements as a function of gas temperature, ranging between the triple point of water and the gallium melting point, allowed for a spectroscopic determination of the Boltzmann constant with a relative accuracy of $\sim1.6\times10^{-4}$.
△ Less
Submitted 11 April, 2008;
originally announced April 2008.
-
Quantum Physics Exploring Gravity in the Outer Solar System: The Sagas Project
Authors:
P. Wolf,
Ch. J. Bordé,
A. Clairon,
L. Duchayne,
A. Landragin,
P. Lemonde,
G. Santarelli,
W. Ertmer,
E. Rasel,
F. S. Cataliotti,
M. Inguscio,
G. M. Tino,
P. Gill,
H. Klein,
S. Reynaud,
C. Salomon,
E. Peik,
O. Bertolami,
P. Gil,
J. Páramos,
C. Jentsch,
U. Johann,
A. Rathke,
P. Bouyer,
L. Cacciapuoti
, et al. (30 additional authors not shown)
Abstract:
We summarise the scientific and technological aspects of the SAGAS (Search for Anomalous Gravitation using Atomic Sensors) project, submitted to ESA in June 2007 in response to the Cosmic Vision 2015-2025 call for proposals. The proposed mission aims at flying highly sensitive atomic sensors (optical clock, cold atom accelerometer, optical link) on a Solar System escape trajectory in the 2020 to…
▽ More
We summarise the scientific and technological aspects of the SAGAS (Search for Anomalous Gravitation using Atomic Sensors) project, submitted to ESA in June 2007 in response to the Cosmic Vision 2015-2025 call for proposals. The proposed mission aims at flying highly sensitive atomic sensors (optical clock, cold atom accelerometer, optical link) on a Solar System escape trajectory in the 2020 to 2030 time-frame. SAGAS has numerous science objectives in fundamental physics and Solar System science, for example numerous tests of general relativity and the exploration of the Kuiper belt. The combination of highly sensitive atomic sensors and of the laser link well adapted for large distances will allow measurements with unprecedented accuracy and on scales never reached before. We present the proposed mission in some detail, with particular emphasis on the science goals and associated measurements.
△ Less
Submitted 12 August, 2008; v1 submitted 2 November, 2007;
originally announced November 2007.
