-
Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets
Authors:
Anand B. Puthirath,
Aravind Puthirath Balan,
Eliezer F. Oliveira,
Vishnu Sreepal,
Francisco C. Robles Hernandez,
Guanhui Gao,
Nithya Chakingal,
Lucas M. Sassi,
Prasankumar Thibeorchews,
Gelu Costin,
Robert Vajtai,
Douglas S. Galvao,
Rahul R. Nair,
Pulickel M. Ajayan
Abstract:
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (…
▽ More
Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.
△ Less
Submitted 28 August, 2021; v1 submitted 6 October, 2020;
originally announced October 2020.
-
A DFT Investigation of the Electronic and Optical Properties of Pentadiamond
Authors:
Raphael M. Tromer,
Levy C. Felix,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Recently, a new carbon 3D carbon allotrope named pentadiamond was proposed. Pentadiamond is composed of carbon atoms in mixed sp$^2$ and sp$^3$-like hybridization. In this work, we have carried out a detailed investigation of the electronic and optical properties of pentadiamond structure using first-principles (DFT) methods. Our results show that pentadiamond has an indirect bandgap semiconductor…
▽ More
Recently, a new carbon 3D carbon allotrope named pentadiamond was proposed. Pentadiamond is composed of carbon atoms in mixed sp$^2$ and sp$^3$-like hybridization. In this work, we have carried out a detailed investigation of the electronic and optical properties of pentadiamond structure using first-principles (DFT) methods. Our results show that pentadiamond has an indirect bandgap semiconductor of $2.50$ eV with GGA-PBE and $3.31$ eV with HSE06. Its static dielectric constant is $4.70$ and the static refractive index is $2.16$. Pentadiamond presents low reflectivity, almost 40$\%$, for all-optical spectrum, making it a good structure to be used as a UV collector. Also, pentadiamond exhibits optical activity in the UV range where other carbon allotropes, such as diamond and 8-tetra(2,2) tubulane show no activity.
△ Less
Submitted 3 September, 2020;
originally announced September 2020.
-
On the Adsorption Mechanism of Caffeine on MAPbI3 Perovskite Surfaces: A Combined UMC--DFT Study
Authors:
Luiz A. Ribeiro Junior,
Raphael M. Tromer,
Ramiro M. dos Santos,
Douglas S. Galvão
Abstract:
Recently, it was experimentally shown that the performance and thermal stability of the perovskite MAPbI$_3$ were improved upon the adsorption of a molecular layer of caffeine. In this work, we used a hybrid methodology that combines Uncoupled Monte Carlo (UMC) and Density Functional Theory (DFT) simulations to carry out a detailed and comprehensive study of the adsorption mechanism of a caffeine…
▽ More
Recently, it was experimentally shown that the performance and thermal stability of the perovskite MAPbI$_3$ were improved upon the adsorption of a molecular layer of caffeine. In this work, we used a hybrid methodology that combines Uncoupled Monte Carlo (UMC) and Density Functional Theory (DFT) simulations to carry out a detailed and comprehensive study of the adsorption mechanism of a caffeine molecule on the surface of MAPbI$_3$. Our results showed that the adsorption distance and energy of a caffeine molecule on the MAPbI$_3$ surface are 2.0 Å and -0.3 eV, respectively. The caffeine/MAPbI$_3$ complex presents a direct bandgap of 2.38 eV with two flat intragap bands distanced 1.15 and 2.18 eV from the top of valence bands. Although the energy band levels are not significantly shifted by the presence of caffeine, the interaction MAPbI$_3$/perovskite is enough to affect the bands' dispersion, particularly the conduction bands.
△ Less
Submitted 6 April, 2021; v1 submitted 5 August, 2020;
originally announced August 2020.
-
Optoelectronic Properties of Amorphous Carbon-Based Nanotube and Nanoscroll
Authors:
Raphael M. Tromer,
Levi C. Felix,
Luiz A. Ribeiro,
Douglas S. Galvao
Abstract:
Free-standing monolayer amorphous carbon (MAC) is a pure carbon structure composed of randomly distributed atom rings with different sizes, which was recently synthesized. In this work, we carried out ab initio and tight-binding calculations to investigate the optoelectronic properties of MAC and its derived nanotube and nanoscroll configurations. Our results show MAC, tube, and scrolls exhibit si…
▽ More
Free-standing monolayer amorphous carbon (MAC) is a pure carbon structure composed of randomly distributed atom rings with different sizes, which was recently synthesized. In this work, we carried out ab initio and tight-binding calculations to investigate the optoelectronic properties of MAC and its derived nanotube and nanoscroll configurations. Our results show MAC, tube, and scrolls exhibit similar electronic behavior. All structures absorb from infrared to ultraviolet, with maximum absorption peaks the visible-ultra violet ($\sim 3.2$ eV). The maximum and minimum reflectivity values are in the range 0.3-0.5 (infrared) and 0.1-0.0 (ultraviolet), making these materials good candidates to ultraviolet filters.
△ Less
Submitted 9 July, 2020;
originally announced July 2020.
-
On the Elastic Properties of Single-Walled Phagraphene Nanotubes
Authors:
M. L. Pereira Junior,
J. M. De Sousa,
W. H. S. Brandão,
A. L. Aguiar,
R. A. Bizão,
L. A. Ribeiro Junior,
D. S. Galvão
Abstract:
Phagraphene (PhaG) is a quasi-planar 2D structure composed of $5-6-7$ ring sequence. We have investigated the structural and mechanical properties of phagraphene nanotubes (PhaNTs) through fully atomistic reactive molecular dynamics (MD) simulations. For comparison purposes, the results were also contrasted to similar carbon nanotubes (CNTs). Results showed that PhaNTs and CNTs present similar bri…
▽ More
Phagraphene (PhaG) is a quasi-planar 2D structure composed of $5-6-7$ ring sequence. We have investigated the structural and mechanical properties of phagraphene nanotubes (PhaNTs) through fully atomistic reactive molecular dynamics (MD) simulations. For comparison purposes, the results were also contrasted to similar carbon nanotubes (CNTs). Results showed that PhaNTs and CNTs present similar brittle fracture mechanisms. The Young's modulus values obtained for PhaNTs were smaller than the corresponding ones for CNTs. Both, PhaNTs and CNTs, present equivalent fracture strains ranging between 15\%-20\%. For the ultimate strength values, CNTs present values about 30\% higher than the corresponding ones for PhaNTs.
△ Less
Submitted 30 September, 2020; v1 submitted 3 July, 2020;
originally announced July 2020.
-
Mechanical Properties of Diamond Schwarzites: From Molecular Dynamics Simulations to 3D Printing
Authors:
Levi C. Felix,
Vladimir Gaál,
Cristiano F. Woellner,
Varlei Rodrigues,
Douglas S. Galvao
Abstract:
Schwarzites are porous crystalline structures with Gaussian negative curvature. In this work, we investigated the mechanical behavior and energy absorption properties of two carbon-based diamond schwarzites (D688 and D8bal). We carried out fully atomistic molecular dynamics (MD) simulations. The optimized MD atomic models were used to generate macro-scale models for 3D-printing (PolyLactic Acid (P…
▽ More
Schwarzites are porous crystalline structures with Gaussian negative curvature. In this work, we investigated the mechanical behavior and energy absorption properties of two carbon-based diamond schwarzites (D688 and D8bal). We carried out fully atomistic molecular dynamics (MD) simulations. The optimized MD atomic models were used to generate macro-scale models for 3D-printing (PolyLactic Acid (PLA) polymer filaments) through Fused Deposition Modelling (FDM). Mechanical properties under uniaxial compression were investigated for both the atomic models and the 3D-printed ones. Mechanical testings were performed on the 3D-printed schwarzites where the deformation mechanisms were found to be similar to those observed in MD simulations. These results are suggestive of a scale-independent mechanical behavior that is dominated by structural topology. The structures exhibit high specific energy absorption and crush force efficiency ~0.8, which suggest that the 3D-printed diamond schwarzites are good candidates as energy-absorbing materials.
△ Less
Submitted 16 April, 2020;
originally announced June 2020.
-
Temperature Effects on the Fracture Dynamics and Elastic Properties of Popgraphene Membranes
Authors:
Marcelo L. Pereira Júnior,
Luiz A. Ribeiro Júnior,
Wjefferson H. S. Brandão,
Acrisio L. Aguiar,
Douglas S. Galvão,
José M. De Sousa
Abstract:
Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of $5-8-5$ carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG p…
▽ More
Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of $5-8-5$ carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG presents very distinct fracture mechanisms depending on the temperature and direction of the applied stretching. The main fracture dynamics trends are temperature independent and exhibit an abrupt rupture followed by fast crack propagation. The reason for this anisotropy is due to the fact that y-direction stretching leads to a deformation in the shape of the rings that cause the breaking of bonds in the pentagon-octagon and pentagon-pentagon ring connections, which is not observed for the x-direction. PopG is less stiff than graphene membranes, but the Young's modulus value is only 15% smaller.
△ Less
Submitted 30 September, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
On the sulfur do** of gamma-graphdiyne: A Molecular Dynamics and DFT study
Authors:
Eliezer Fernando Oliveira,
Augusto Batagin-Neto,
Douglas Soares Galvao
Abstract:
Recently, an experimental study developed an efficient way to obtain sulfur-doped gamma-graphdiyne. This study has shown that this new material could have promising applications in lithium-ion batteries, but the complete understanding of how the sulfur atoms are incorporated into the graphdiyne network is still missing. In this work, we have investigated the sulfur do** process through molecular…
▽ More
Recently, an experimental study developed an efficient way to obtain sulfur-doped gamma-graphdiyne. This study has shown that this new material could have promising applications in lithium-ion batteries, but the complete understanding of how the sulfur atoms are incorporated into the graphdiyne network is still missing. In this work, we have investigated the sulfur do** process through molecular dynamics and density functional theory simulations. Our results suggest that the doped induced distortions of the gamma-graphdiyne pores prevent the incorporation of more than two sulfur atoms. The most common configuration is the incorporation of just one sulfur atom per the graphdiyne pore.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Thiophene-Tetrathia-Annulene monolayer (TTA-2D): A new 2D semiconductor material with indirect bandgap
Authors:
Raphael M. Tromer,
Leonardo D. Machado,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
We propose a new 2D semiconductor material (TTA-2D) based on the molecular structure of Thiophene-Tetrathia-Annulene (TTA). The TTA-2D structural, electronic, and optical properties were investigated using \textit{ab initio} methods. Our results show that TTA-2D is a small indirect bandgap semiconductor ($0.6$ eV). A semiconductor-metal transition can be induced by applying a uniaxial strain. Our…
▽ More
We propose a new 2D semiconductor material (TTA-2D) based on the molecular structure of Thiophene-Tetrathia-Annulene (TTA). The TTA-2D structural, electronic, and optical properties were investigated using \textit{ab initio} methods. Our results show that TTA-2D is a small indirect bandgap semiconductor ($0.6$ eV). A semiconductor-metal transition can be induced by applying a uniaxial strain. Our results also show that TTA-2D is thermally stable up to $T=1000$ K. TTA-2D absorbs in a large spectral range, from infrared to ultraviolet regions. Values of refractive index and reflectivity show that TTA-2D reflects only $10\%$ of the incident light in the visible region. These results suggest that TTA-2D is a promising material for solar cell applications.
△ Less
Submitted 1 May, 2020;
originally announced May 2020.
-
On the Structural Stability and Optical Properties of Germanium-based Schwarzites: A Density Functional Theory Investigation
Authors:
Raphael M. Tromer,
Levi C. Felix,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Since graphene was synthesized the interest for building new 2D and 3D structures based on the carbon allotropes has been growing every day. One of these 3D structures is know as carbon schwarzites. Schwarzites consist of carbon nanostructures possessing the shape of Triply-Periodic Minimal Surfaces (TPMS), which is characterized by a negative Gaussian curvature introduced by the presence of carbo…
▽ More
Since graphene was synthesized the interest for building new 2D and 3D structures based on the carbon allotropes has been growing every day. One of these 3D structures is know as carbon schwarzites. Schwarzites consist of carbon nanostructures possessing the shape of Triply-Periodic Minimal Surfaces (TPMS), which is characterized by a negative Gaussian curvature introduced by the presence of carbon rings with more than six atoms. Some examples of schwarzite families include: primitive (P), gyroid (G) and diamond (D). Previous studies considering different element species of schwarzites have investigated the mechanical, electrical and thermal properties. In this work, we investigated the stability of germanium (Ge) schwarzites using density functional theory with GGA exchange-correlation functional. We chose one structure of each family (P8bal), (G688) and (D688). It was observed that regions usually flat in carbon schwarzites acquires buckled configurations as previously observed on silicene and germanene monolayers. The investigated structures presented a semiconducting bandgap ranging from $0.13$ to $0.27$ eV. We also performed calculations of optical properties within the linear regime, where it was shown that Ge schwarzites structures absorb light from infrared to ultra-violet frequencies. Therefore, our results open new perspectives of materials that can be used in optelectronics devices application.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
On the Mechanical and Thermal Stability of Free-standing Monolayer Amorphous Carbon
Authors:
Levi C. Felix,
Raphael M. Tromer,
Luiz A. Ribeiro Junior,
Douglas S. Galvao
Abstract:
Recently (C.-T. Toh et al., Nature 577, 199 (2020)), the first synthesis of free-standing monolayer amorphous carbon (MAC) was achieved. MAC is a pure carbon structure composed of five, six, seven and eight atom rings randomly distributed. MAC proved to be surprisingly stable and highly fracture resistant. Its electronic properties are similar to boron nitride. In this work, we have investigated t…
▽ More
Recently (C.-T. Toh et al., Nature 577, 199 (2020)), the first synthesis of free-standing monolayer amorphous carbon (MAC) was achieved. MAC is a pure carbon structure composed of five, six, seven and eight atom rings randomly distributed. MAC proved to be surprisingly stable and highly fracture resistant. Its electronic properties are similar to boron nitride. In this work, we have investigated the mechanical properties and thermal stability of MAC models using fully-atomistic reactive molecular dynamics simulations. For comparison purposes, the results are contrasted against pristine graphene (PG) models of similar dimensions. Our results show that MAC and PG exhibit distinct mechanical behavior and fracture dynamics patterns. While PG after a critical strain threshold goes directly from elastic to brittle regimes, MAC shows different elastic stages between these two regimes. Remarkably, MAC is thermally stable up to 3600 K, which is close to the PG melting point. These exceptional physical properties make MAC-based materials promising candidates for new technologies, such as flexible electronics.
△ Less
Submitted 11 February, 2020;
originally announced February 2020.
-
Zeolite-inspired 3d printed structures with enhanced mechanical properties
Authors:
Rushikesh S. Ambekar,
Eliezer F. Oliveira,
Brijesh Kushwaha,
Leonardo D. Machado,
Mohammad Sajadi,
Ray H. Baughman,
Pulickel M. Ajayan,
Ajit K. Roy,
Douglas S. Galvao,
Chandra S. Tiwary
Abstract:
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, r…
▽ More
Specific strength (strength/density) is a crucial factor while designing high load bearing architecture in areas of aerospace and defence. Strength of the material can be enhanced by blending with high strength component or, by compositing with high strength fillers but both the options has limitations such as at certain load, materials fail due to poor filler and matrix interactions. Therefore, researchers are interested in enhancing strength of materials by playing with topology/geometry and therefore nature is best option to mimic for structures whereas, complexity limits nature mimicked structures. In this paper, we have explored Zeolite-inspired structures for load bearing capacity. Zeolite-inspired structure were obtained from molecular dynamics simulation and then fabricated via Fused deposition Modeling. The atomic scale complex topology from simulation is experimentally synthesized using 3D printing. Compressibility of as-fabricated structures was tested in different direction and compared with simulation results. Such complex architecture can be used for ultralight aerospace and automotive parts.
△ Less
Submitted 12 February, 2020; v1 submitted 2 February, 2020;
originally announced February 2020.
-
Structural and Electronic Properties of Defective AlN/GaN Hybrid Nanostrutures
Authors:
Ramiro Marcelo dos Santos,
Acrisio Lins de Aguiar,
Jonathan da Rocha Martins,
Renato Batista dos Santos,
Douglas Soares Galvão,
Luiz Antonio Ribeiro Junior
Abstract:
Due to the wide range of possible applications, atomically thin two-dimensional heterostructures have attracted much attention. In this work, using first-principles calculations, we investigated the structural and electronic properties of planar AlN/GaN hybrid heterojunctions with the presence of vacancies at their interfaces. Our results reveal that a single vacant site, produced by the removal o…
▽ More
Due to the wide range of possible applications, atomically thin two-dimensional heterostructures have attracted much attention. In this work, using first-principles calculations, we investigated the structural and electronic properties of planar AlN/GaN hybrid heterojunctions with the presence of vacancies at their interfaces. Our results reveal that a single vacant site, produced by the removal of Aluminum or Gallium atom, produces similar electronic band structures with localized states within the bandgap. We have also observed a robust magnetic behavior. A nitrogen-vacancy, on the other hand, induces the formation of midgap states with reduced overall magnetization. We have also investigated nanotubes formed by rolling up these heterojunctions. We observed that tube curvature does not substantially affect the electronic and magnetic properties of their parent AlN/GaN heterojunctions. For armchair-like tubes, a transition from direct to indirect bandgap was observed as a consequence of changing the system geometry from 2D towards a quasi-one-dimensional one. The magnetic features presented by the AlN/GaN defective lattices make them good candidates for develo** new spintronic technologies.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Graphene-based Nanoscale version of da Vinci's Reciprocal Structures
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
A reciprocal structure (RS) is a mechanical resistant structure formed by a set of self-supporting elements satisfying certain conditions of structural reciprocity (SR) . The first condition is that each element of the structure has to support and be supported by the others. The second condition is that these functions cannot occur in the same part of the element. These two properties make beams a…
▽ More
A reciprocal structure (RS) is a mechanical resistant structure formed by a set of self-supporting elements satisfying certain conditions of structural reciprocity (SR) . The first condition is that each element of the structure has to support and be supported by the others. The second condition is that these functions cannot occur in the same part of the element. These two properties make beams and two-dimensional materials very much appropriate to build RSs. Commonly seen in floors or roofs, SR is also present in art, religious symbols and decorative objects. Da Vinci has drawn several examples of such RSs. Here, we propose a simple nano version of a da Vinci's RS based on graphene nanoribbons. The stability and resistance against mechanical impacts (ballistic projectile) were investigated through fully atomistic molecular dynamics (MD) simulations. We considered structures with three and four joins with and without RS topologies. Our MD results showed that structures with RS topologies are more impact resistant than those without SR, despite the fact that the used graphene nanoribbons are highly pliable. We discuss these results in terms of the number of joins, energy absorption and stress on the structures. We discuss possible applications in nanoengineering.
△ Less
Submitted 18 November, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Ballistic Properties of Highly Stretchable Graphene Kirigami Pyramid
Authors:
Alirio Moura,
Douglas S. Galvao,
Pedro Alves da Silva Autreto
Abstract:
Graphene kirigami (patterned cuts) can be an effective way to improve some of the graphene mechanical and electronic properties. In this work, we report the first study of the mechanical and ballistic behavior of single and multilayered graphene pyramid kirigami (GKP). We have carriedout fully atomistic reactive molecular dynamics simulations. GPK presents a unique kinetic energy absorption due to…
▽ More
Graphene kirigami (patterned cuts) can be an effective way to improve some of the graphene mechanical and electronic properties. In this work, we report the first study of the mechanical and ballistic behavior of single and multilayered graphene pyramid kirigami (GKP). We have carriedout fully atomistic reactive molecular dynamics simulations. GPK presents a unique kinetic energy absorption due to its topology that creates multi-steps dissipation mechanisms, which block crack propagation. Our results show that even having significantly less mass, GKP can outperform graphene structures with similar dimensions in terms of absorbing kinetic energy.
△ Less
Submitted 26 January, 2020;
originally announced January 2020.
-
Carbon Nanotube Peapods Under High-Strain Rate Conditions: A Molecular Dynamics Investigation
Authors:
J. M. De Sousa,
C. F. Woellner,
L. D. Machado,
P. A. S. Autreto,
D. S. Galvao
Abstract:
New forms of carbon-based materials have received great attention, and the developed materials have found many applications in nanotechnology. Interesting novel carbon structures include the carbon peapods, which are comprised of fullerenes encapsulated within carbon nanotubes. Peapod-like nanostructures have been successfully synthesized, and have been used in optical modulation devices, transist…
▽ More
New forms of carbon-based materials have received great attention, and the developed materials have found many applications in nanotechnology. Interesting novel carbon structures include the carbon peapods, which are comprised of fullerenes encapsulated within carbon nanotubes. Peapod-like nanostructures have been successfully synthesized, and have been used in optical modulation devices, transistors, solar cells, and in other devices. However, the mechanical properties of these structures are not completely elucidated. In this work, we investigated, using fully atomistic molecular dynamics simulations, the deformation of carbon peapods under high-strain rate conditions, which are achieved by shooting the peapods at ultrasonic velocities against a rigid substrate. Our results show that carbon peapods experience large deformation at impact, and undergo multiple fracture pathways, depending primarily on the relative orientation between the peapod and the substrate, and the impact velocity. Observed outcomes include fullerene ejection, carbon nanotube fracture, fullerene, and nanotube coalescence, as well as the formation of amorphous carbon structures.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
Carbon Schwarzites Behavior Under Ballistic Impacts
Authors:
Levi C. Felix,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Schwarzites are 3D crystalline porous materials exhibiting the shape of Triply Periodic Minimal Surfaces (TPMS). They possess negative Gaussian curvature, created by the presence of rings with more than six sp2-hybridized carbon atoms. Recently, new routes to their synthesis have been proposed. Due to its foam-like structure, schwarzites are interesting for mechanical energy absorption application…
▽ More
Schwarzites are 3D crystalline porous materials exhibiting the shape of Triply Periodic Minimal Surfaces (TPMS). They possess negative Gaussian curvature, created by the presence of rings with more than six sp2-hybridized carbon atoms. Recently, new routes to their synthesis have been proposed. Due to its foam-like structure, schwarzites are interesting for mechanical energy absorption applications. In this work, we investigate through fully atomistic reactive molecular dynamics the mechanical response under ballistic impacts of four structures from primitive (P) and gyroid (G) families (two structures within each family). The two structures in the same family differ mainly by the ratio of hexagons to octagons, where this ratio increases the 'flatness' of the structures. Although the penetration depth values are higher in the 'flatter' structures (P8bal and G8bal), the absorbed kinetic energy by them is considerably higher, which yields them a better energy-absorption performance.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Tuning Penta-Graphene Electronic Properties Through Engineered Line Defects
Authors:
Ramiro Marcelo dos Santos,
Leonardo Evaristo de Sousa,
Douglas Soares Galvão,
Luiz Antonio Ribeiro Junior
Abstract:
Penta-graphene is a quasi-two-dimensional carbon allotrope consisting of a pentagonal lattice in which both sp2 and sp3-like carbons are present. Unlike graphene, penta-graphene exhibits a non-zero bandgap, which opens the possibility of its use in optoelectronic applications. However, as the observed bandgap is large, gap tuning strategies such as do** are required. In this work, density functi…
▽ More
Penta-graphene is a quasi-two-dimensional carbon allotrope consisting of a pentagonal lattice in which both sp2 and sp3-like carbons are present. Unlike graphene, penta-graphene exhibits a non-zero bandgap, which opens the possibility of its use in optoelectronic applications. However, as the observed bandgap is large, gap tuning strategies such as do** are required. In this work, density functional theory calculations are used to determine the effects of the different number of line defects of substitutional nitrogen or silicon atoms on the penta-graphene electronic behavior. Our results show that this do** can induce semiconductor, semimetallic, or metallic behavior depending on the do** atom and targeted hybridization (sp2 or $sp3-like carbons). In particular, we observed that nitrogen do** of sp2-like carbons atoms can produce a bandgap modulation between semimetallic and semiconductor behavior. These results show that engineering line defects can be an effective way to tune penta-graphene electronic behavior.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Mechanical Properties of a Diamond Schwarzite: From Atomistic Models to 3D-Printed Structures
Authors:
Levi C. Felix,
Vladimir Gaal,
Cristiano F. Woellner,
Varlei Rodrigues,
Douglas S. Galvao
Abstract:
Triply Periodic Minimal Surfaces (TPMS) possess locally minimized surface area under the constraint of periodic boundary conditions. Different families of surfaces were obtained with different topologies satisfying such conditions. Examples of such families include Primitive (P), Gyroid (G) and Diamond (D) surfaces. From a purely mathematical subject, TPMS have been recently found in materials sci…
▽ More
Triply Periodic Minimal Surfaces (TPMS) possess locally minimized surface area under the constraint of periodic boundary conditions. Different families of surfaces were obtained with different topologies satisfying such conditions. Examples of such families include Primitive (P), Gyroid (G) and Diamond (D) surfaces. From a purely mathematical subject, TPMS have been recently found in materials science as optimal geometries for structural applications. Proposed by Mackay and Terrones in 1991, schwarzites are 3D crystalline porous carbon nanocrystals exhibiting the shape of TPMS. Although their complex topology poses serious limitations on their synthesis with conventional nanoscale fabrication methods, such as Chemical Vapour Deposition (CVD), TPMS can be fabricated by Additive Manufacturing (AM) techniques, such as 3D Printing. In this work, we used an optimized atomic model of a schwarzite structure from the D family (D8bal) to generate a surface mesh that was subsequently used for 3D-printing through Fused Deposition Modelling (FDM). This D schwarzite was 3D-printed with thermoplastic PolyLactic Acid (PLA) polymer filaments. Mechanical properties under uniaxial compression were investigated for both the atomic model and the 3D-printed one. Fully atomistic Molecular Dynamics (MD) simulations were also carried out to investigate the uniaxial compression behavior of the D8bal atomic model. Mechanical testings were performed on the 3D-printed schwarzite where the deformation mechanisms were found to be similar to those observed in MD simulations. These results are suggestive of a scale-independent mechanical behavior that is dominated by structural topology.
△ Less
Submitted 10 January, 2020;
originally announced January 2020.
-
Three-dimensional carbon nanotube networks from beta zeolite templates: Thermal stability and mechanical properties
Authors:
Eliezer F. Oliveira,
Leonardo D. Machado,
Ray H. Baughman,
Douglas S. Galvao
Abstract:
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial fill…
▽ More
We here investigated the thermal and mechanical behaviors of three-dimensional beta zeolite-templated carbon nanotube networks (BZCN). These networks are topologically generated by inserting carbon nanotubes (CNTs) into zeolite channels and connecting them using X-type junctions. We considered two cases, one with the tubes filling all zeolite channels (HD-BZCN) and the other with just partial filling (LD-BZCN). Fully atomistic reactive molecular dynamics (MD) simulations show that the networks exhibit high thermal stability (up to 1000 K). When compressed, the structures can withstand very large strains without fracturing (>50% for HD-BZCN and >70% for LD-BZCN). LD-BZCN can be stretched over 100% without fracturing.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Elastic and Fracture Properties of Single Walled Pentagraphene Nanotubes
Authors:
J. M. De Sousa,
A. L. Aguiar,
E. C. Girão,
Alexandre F. Fonseca,
V. R. Coluci,
D. S. Galvão
Abstract:
Membranes of carbon allotropes comprised solely of densely packed pentagonal rings, known as pentagraphene, exhibit negative Poisson's ratio (auxetic behavior) and a bandgap of $3.2$ eV. In this work, we investigated the structural stability, mechanical and fracture properties of nanotubes formed by rolling up pentagraphene membranes, the so-called pentagraphene nanotubes (PGNTs). Single-walled PG…
▽ More
Membranes of carbon allotropes comprised solely of densely packed pentagonal rings, known as pentagraphene, exhibit negative Poisson's ratio (auxetic behavior) and a bandgap of $3.2$ eV. In this work, we investigated the structural stability, mechanical and fracture properties of nanotubes formed by rolling up pentagraphene membranes, the so-called pentagraphene nanotubes (PGNTs). Single-walled PGNT of three distinct configurations: zigzag, $α$-armchair, and $β$-armchair were studied combining first-principles calculations and reactive molecular dynamics simulations. Our results showed Young's modulus values of $680-800 GPa$, critical strain of $18-21\%$, and ultimate tensile stress of $85-110 GPa$. We also observed auxetic behavior. During stretching at room temperature, we observed a transition between $β$-armchair to $α$-armchair PGNT close to the critical strain. With relation to fracture patterns, we observed that mechanical failure starts at bonds mostly aligned to the stretching direction and after tube radial collapse.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Torsional refrigeration by twisted, coiled, and supercoiled fibers
Authors:
Run Wang,
Shaoli Fang,
Yicheng Xiao,
Enlai Gao,
Nan Jiang,
Yaowang Li,
Linlin Mou,
Yanan Shen,
Wubin Zhao,
Sitong Li,
Alexandre F. Fonseca,
Douglas S. Galvão,
Mengmeng Chen,
Wenqian He,
Kaiqing Yu,
Hongbing Lu,
Xuemin Wang,
Dong Qian,
Ali E. Aliev,
Na Li,
Carter S. Haines,
Zhongsheng Liu,
Jiuke Mu,
Zhong Wang,
Shougen Yin
, et al. (5 additional authors not shown)
Abstract:
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural r…
▽ More
Higher efficiency, lower cost refrigeration is needed for both large and small scale cooling. Refrigerators using entropy changes during cycles of stretching or hydrostatically compression of a solid are possible alternatives to the vapor-compression fridges found in homes. We show that high cooling results from twist changes for twisted, coiled, or supercoiled fibers, including those of natural rubber, NiTi, and polyethylene fishing line. By using opposite chiralities of twist and coiling, supercoiled natural rubber fibers and coiled fishing line fibers result that cool when stretched. A demonstrated twist-based device for cooling flowing water provides a high cooling energy and device efficiency. Theory describes the axial and spring index dependencies of twist-enhanced cooling and its origin in a phase transformation for polyethylene fibers.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
New zero Poisson's ratio models
Authors:
Vladimir Gaal,
Varlei Rodrigues,
Socrates O. Dantas,
Douglas S. Galvao,
Alexandre F. Fonseca
Abstract:
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on…
▽ More
Most materials exhibit positive Poisson's ratio (PR) values but special structures can also present negative and, even rarer, zero (or close to zero) PR. Null PR structures have received much attention due to their unusual properties and potential applications in different fields, such as aeronautics and bio-engineering. Here, we present a new and simple near-zero PR 2D topological model based on a structural block composed of two smooth and rigid bars connected by a soft membrane or spring. It is not based on re-entrant or honeycomb-like configurations, which have been the basis of many null or quasi-null PR models. Our topological model was 3D printed and the experimentally obtained PR was$-0.003\,\pm 0.001\,$, which is one the closest to zero value ever reported. This topological model can be easily extended to 3D systems and with compression in any direction. The advantages and disadvantages of these models are also addressed.
△ Less
Submitted 14 September, 2019;
originally announced September 2019.
-
Mechanical and Energy-absorption Properties of Schwarzites
Authors:
Levi C. Felix,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
We investigated through fully atomistic molecular dynamics simulations, the mechanical behavior (compressive and tensile) and energy absorption properties of two families (primitive (P688 and P8bal) and gyroid (G688 and G8bal)) of carbon-based schwarzites. Our results show that all schwarzites can be compressed (with almost total elastic recovery) without fracture to more than 50%, one of them can…
▽ More
We investigated through fully atomistic molecular dynamics simulations, the mechanical behavior (compressive and tensile) and energy absorption properties of two families (primitive (P688 and P8bal) and gyroid (G688 and G8bal)) of carbon-based schwarzites. Our results show that all schwarzites can be compressed (with almost total elastic recovery) without fracture to more than 50%, one of them can be even remarkably compressed up to 80%. One of the structures (G8bal) presents negative Poisson's ratio value (auxetic behavior). The crush force efficiency, the stroke efficiency and the specific energy absorption (SEA) values show that schwarzites can be effective energy absorber materials. Although the same level of deformation without fracture observed in the compressive case is not observed for the tensile case, it is still very high (30-40%). The fracture dynamics show extensive structural reconstructions with the formation of linear atomic chains (LACs).
△ Less
Submitted 6 September, 2019;
originally announced September 2019.
-
Elastic Properties of Graphyne-based Nanotubes
Authors:
J. M. De Sousa,
R. A. Bizao,
V. P. Sousa Filho,
A. L. Aguiar,
V. R. Coluci,
N. M. Pugno,
E. C. Girao,
A. G. Souza Filho,
D. S. Galvao
Abstract:
Graphyne nanotubes (GNTs) are nanostructures obtained from rolled up graphyne sheets, in the same way carbon nanotubes (CNTs) are obtained from graphene ones. Graphynes are 2D carbon-allotropes composed of atoms in sp and sp2 hybridized states. Similarly to conventional CNTs, GNTs can present different chiralities and electronic properties. Because of the acetylenic groups (triple bonds), GNTs exh…
▽ More
Graphyne nanotubes (GNTs) are nanostructures obtained from rolled up graphyne sheets, in the same way carbon nanotubes (CNTs) are obtained from graphene ones. Graphynes are 2D carbon-allotropes composed of atoms in sp and sp2 hybridized states. Similarly to conventional CNTs, GNTs can present different chiralities and electronic properties. Because of the acetylenic groups (triple bonds), GNTs exhibit large sidewall pores that influence their mechanical properties. In this work, we studied the mechanical response of GNTs under tensile stress using fully atomistic molecular dynamics simulations and density functional theory (DFT) calculations. Our results show that GNTs mechanical failure (fracture) occurs at larger strain values in comparison to corresponding CNTs, but paradoxically with smaller ultimate strength and Young's modulus values. This is a consequence of the combined effects of the existence of triple bonds and increased porosity/flexibility due to the presence of acetylenic groups.
△ Less
Submitted 6 May, 2019;
originally announced May 2019.
-
The Structure of Graphene on Graphene/C60/Cu Interfaces: A Molecular Dynamics Study
Authors:
Alexandre F. Fonseca,
Sócrates O. Dantas,
Douglas S. Galvão,
Difan Zhang,
Susan B. Sinnott
Abstract:
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular…
▽ More
Two experimental studies reported the spontaneous formation of amorphous and crystalline structures of C60 intercalated between graphene and a substrate. They observed interesting phenomena ranging from reaction between C60 molecules under graphene to graphene sagging between the molecules and control of strain in graphene. Motivated by these works, we performed fully atomistic reactive molecular dynamics simulations to study the formation and thermal stability of graphene wrinkles as well as graphene attachment to and detachment from the substrate when graphene is laid over a previously distributed array of C60 molecules on a copper substrate at different values of temperature. As graphene compresses the C60 molecules against the substrate, and graphene attachment to the substrate between C60s ("C60s" stands for plural of C60) depends on the height of graphene wrinkles, configurations with both frozen and non-frozen C60s structures were investigated in order to verify the experimental result of stable sagged graphene when the distance between C60s is about 4 nm and height of graphene wrinkles is about 0.8 nm. Below the distance of 4 nm between C60s, graphene becomes locally suspended and less strained. We show that this happens when C60s are allowed to deform under the compressive action of graphene. If we keep the C60s frozen, spontaneous "blanketing" of graphene happens only when the distance between them are equal or above 7 nm. Both above results for the existence of stable sagged graphene for C60 distances of 4 or 7 nm are shown to agree with a mechanical model relating the rigidity of graphene to the energy of graphene-substrate adhesion. In particular, this study might help the development of 2D confined nanoreactors that are considered in literature to be the next advanced step on chemical reactions.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Mechanical Properties of Protomene: A Molecular Dynamics Investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have n…
▽ More
Recently, a new class of carbon allotrope called protomene was proposed. This new structure is composed of sp2 and sp3 carbon-bonds. Topologically, protomene can be considered as an sp3 carbon structure (~80% of this bond type) doped by sp2 carbons. First-principles simulations have shown that protomene presents an electronic bandgap of ~3.4 eV. However, up to now, its mechanical properties have not been investigated. In this work, we have investigated protomene mechanical behavior under tensile strain through fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, as available in the LAMMPS code. At room temperature, our results show that the protomene is very stable and the obtained ultimate strength and ultimate stress indicates an anisotropic behavior. The highest ultimate strength was obtained for the x-direction, with a value of ~110 GPa. As for the ultimate strain, the highest one was for the z-direction (~25% of strain) before protomene mechanical fracture.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Self-tearing and self-peeling of folded graphene nanoribbons
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
A recent experimental study showed that an induced folded flap of graphene can spontaneously drive itself its tearing and peeling off a substrate, thus producing long, micrometer sized, regular trapezoidal-shaped folded graphene nanoribbons. As long as the size of the graphene flaps is above a threshold value, the 'tug of war' between the forces of adhesion of graphene-graphene and graphene-substr…
▽ More
A recent experimental study showed that an induced folded flap of graphene can spontaneously drive itself its tearing and peeling off a substrate, thus producing long, micrometer sized, regular trapezoidal-shaped folded graphene nanoribbons. As long as the size of the graphene flaps is above a threshold value, the 'tug of war' between the forces of adhesion of graphene-graphene and graphene-substrate, flexural strain of folded region and carbon-carbon (C-C) covalent bonds favor the self-tearing and self-peeling off process. As the detailed information regarding the atomic scale mechanism involved in the process remains not fully understood, we carried out atomistic reactive molecular dynamics simulations to address some features of the process. We show that large thermal fluctuations can prevent the process by increasing the probability of chemical reactions between carbon dangling bonds of adjacent graphene layers. The effects of the strength of attraction between graphene and the substrate on the ribbon growth velocities at the early stages of the phenomenon were also investigated. Structures with initial armchair crack-edges were observed to form more uniform cuts than those having initial zigzag ones. Our results are of importance to help set up new experiments on this phenomenon, especially with samples with nanoscale sized cuts.
△ Less
Submitted 27 August, 2018;
originally announced August 2018.
-
Influence of Graphene Wettability on Spreading Patterns of Nanodroplets Impacting at High Speed
Authors:
Ygor M. Jaques,
Douglas S. Galvao
Abstract:
We report here a fully atomistic molecular dynamics study on the dynamics of impact of water nanodroplets (100 Å of diameter) at high velocities (from 1 up to 15 Å/ps) against graphene targets. Our results show that tuning graphene wettability (through parameter changes) significantly affects the structural and dynamical aspects of the nanodroplets. We identified three ranges of velocities with di…
▽ More
We report here a fully atomistic molecular dynamics study on the dynamics of impact of water nanodroplets (100 Å of diameter) at high velocities (from 1 up to 15 Å/ps) against graphene targets. Our results show that tuning graphene wettability (through parameter changes) significantly affects the structural and dynamical aspects of the nanodroplets. We identified three ranges of velocities with distinct characteristics, from simple deposition of the droplet to spreading with rebound, and finally droplet fragmentation. We also identify that in an intermediary velocity of 7 Å/ps, the pattern of spreading critically changes, due to formation of voids on droplet structure. These voids affect in a detrimental way the droplet spreading on the less hydrophilic surface, as it takes more time to the droplet recover from the spreading and to return to a semi-spherical configuration. When the velocity is increased to values larger than 11 Å/ps, the droplet fragments, which reveals the maximum possible spreading.
△ Less
Submitted 27 August, 2018; v1 submitted 20 April, 2018;
originally announced April 2018.
-
On the mechanical properties of novamene: a fully atomistic molecular dynamics and DFT investigation
Authors:
Eliezer F. Oliveira,
Pedro A. S. Autreto,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
We have investigated through fully atomistic reactive molecular dynamics and DFT simulations, the mechanical properties and fracture dynamics of novamene, a new 3D carbon allotrope structure recently proposed. Our results showed that novamene is an anisotropic structure with relation to tensile deformation. Although novamente shares some mechanical features with other carbon allotropes, it also ex…
▽ More
We have investigated through fully atomistic reactive molecular dynamics and DFT simulations, the mechanical properties and fracture dynamics of novamene, a new 3D carbon allotrope structure recently proposed. Our results showed that novamene is an anisotropic structure with relation to tensile deformation. Although novamente shares some mechanical features with other carbon allotropes, it also exhibits distinct ones, such as, extensive structural reconstructions (self-healing effect). Novamene presents ultimate strength (~ 100 GPa) values lower than other carbon allotropes, but it has the highest ultimate strain along the z-direction (~ 22.5%). Although the Young's modulus (~ 600 GPa) and ultimate strength values are smaller than for other carbon allotropes, they still outperform other materials, such as for example silicon, steel or titanium alloys. With relation to the fracture dynamics, novamene is again anisotropic with the fracture/crack propagation originating from deformed heptagons and pentagons for x and y directions and broken sp3 bonds connecting structural planes. Another interesting feature is the formation of multiple and long carbon linear chains in the final fracture stages.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Structural and Thermal Stability of Graphyne and Graphdiyne Nanoscroll Structures
Authors:
Daniel Solis,
Daiane D. Borges,
Cristiano F. Woellner,
Douglas S. Galvao
Abstract:
Graphynes and graphdiynes are generic names for families of two-dimensional carbon allotropes, where acetylenic groups connect benzenoid-like hexagonal rings, with the co-existence of sp and sp2 hybridized carbon atoms. The main differences between graphynes and graphdiynes are the number of acetylenic groups (one and two for graphynes and graphdiynes, respectively). Similarly to graphene nanoscro…
▽ More
Graphynes and graphdiynes are generic names for families of two-dimensional carbon allotropes, where acetylenic groups connect benzenoid-like hexagonal rings, with the co-existence of sp and sp2 hybridized carbon atoms. The main differences between graphynes and graphdiynes are the number of acetylenic groups (one and two for graphynes and graphdiynes, respectively). Similarly to graphene nanoscrolls, graphyne and graphdiynes nanoscrolls are nanosized membranes rolled up into papyrus-like structures. In this work we investigated through fully atomistic reactive molecular dynamics simulations the structural and thermal (up to 1000K) stability of alpha,beta,gamma-graphyne and alpha,beta,gamma-graphdiyne scrolls. Our results show that stable nanoscrolls can be formed for all the structures investigated here, although they are less stable than corresponding graphene scrolls. This can be explained as a consequence of the higher graphyne/graphdiyne structural porosity in relation to graphene, which results in decreased π-π stacking interactions.
△ Less
Submitted 28 February, 2018;
originally announced March 2018.
-
Defect-Free Carbon Nanotube Coils
Authors:
Nitzan Shadmi,
Anna Kremen,
Yiftach Frenkel,
Zachary J. Lapin,
Leonardo D. Machado,
Sergio B. Legoas,
Ora Bitton,
Katya Rechav,
Ronit Popovitz-Biro,
Douglas S. Galvão,
Ado Jorio,
Lukas Novotny,
Beena Kalisky,
Ernesto Joselevich
Abstract:
Carbon nanotubes are promising building blocks for various nanoelectronic components. A highly desirable geometry for such applications is a coil. However, coiled nanotube structures reported so far were inherently defective or had no free ends accessible for contacting. Here we demonstrate the spontaneous self-coiling of single-wall carbon nanotubes into defect-free coils of up to more than 70 tu…
▽ More
Carbon nanotubes are promising building blocks for various nanoelectronic components. A highly desirable geometry for such applications is a coil. However, coiled nanotube structures reported so far were inherently defective or had no free ends accessible for contacting. Here we demonstrate the spontaneous self-coiling of single-wall carbon nanotubes into defect-free coils of up to more than 70 turns with identical diameter and chirality, and free ends. We characterize the structure, formation mechanism, and electrical properties of these coils by different microscopies, molecular dynamics simulations, Raman spectroscopy, and electrical and magnetic measurements. The coils are highly conductive, as expected for defect-free carbon nanotubes, but adjacent nanotube segments in the coil are more highly coupled than in regular bundles of single-wall carbon nanotubes, owing to their perfect crystal momentum matching, which enables tunneling between the turns. Although this behavior does not yet enable the performance of these nanotube coils as inductive devices, it does point a clear path for their realization. Hence, this study represents a major step toward the production of many different nanotube coil devices, including inductors, electromagnets, transformers, and dynamos.
△ Less
Submitted 11 February, 2018;
originally announced February 2018.
-
Schwarzites for Natural Gas Storage: A Grand-Canonical Monte Carlo Study
Authors:
Daiane Damasceno Borges,
Douglas S. Galvao
Abstract:
The 3D porous carbon-based structures called Schwarzites have been recently a subject of renewed interest due to the possibility of being synthesized in the near future. These structures exhibit negatively curvature topologies with tuneable porous sizes and shapes, which make them natural candidates for applications such as CO2 capture, gas storage and separation. Nevertheless, the adsorption prop…
▽ More
The 3D porous carbon-based structures called Schwarzites have been recently a subject of renewed interest due to the possibility of being synthesized in the near future. These structures exhibit negatively curvature topologies with tuneable porous sizes and shapes, which make them natural candidates for applications such as CO2 capture, gas storage and separation. Nevertheless, the adsorption properties of these materials have not been fully investigated. Following this motivation, we have carried out Grand-Canonical Monte Carlo simulations to study the adsorption of small molecules such as CO2, CO, CH4, N2 and H2, in a series of Schwarzites structures. Here, we present our preliminary results on natural gas adsorptive capacity in association with analyses of the guest-host interaction strengths. Our results show that Schwarzites P7par, P8bal and IWPg are the most promising structures with very high CO2 and CH4 adsorption capacity and low saturation pressure (<1bar) at ambient temperature. The P688 is interesting for H2 storage due to its exceptional high H2 adsorption enthalpy value of -19kJ/mol.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Ultralow Density Graphene Oxide/Polydimethylsiloxane Foams
Authors:
Cristiano F. Woellner,
Peter S. Owuor,
Tong Li,
Soumya Vinod,
Sehmus Ozden,
Suppanat Kosolwattana,
Sanjit Bhowmick,
Luong X. Duy,
Rodrigo V. Salvatierra,
Bingqing Wei,
Syed A. S. Asif,
James M. Tour,
Robert Vajtai,
Jun Lou,
Douglas S. Galvao,
Chandra S. Tiwary,
Pulickel. M. Ajayan
Abstract:
Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical prop…
▽ More
Low-density, highly porous graphene/graphene oxide (GO) based-foams have shown high performance in energy absorption applications, even under high compressive deformations. In general, foams are very effective as energy dissipative materials and have been widely used in many areas such as automotive, aerospace and biomedical industries. In the case of graphene-based foams, the good mechanical properties are mainly attributed to the intrinsic graphene and/or GO electronic and mechanical properties. Despite the attractive physical properties of graphene/GO based-foams, their structural and thermal stabilities are still a problem for some applications. For instance, they are easily degraded when placed in flowing solutions, either by the collapsing of their layers or just by structural disintegration into small pieces. Recently, a new and scalable synthetic approach to produce low-density 3D macroscopic GO structure interconnected with polydimethylsiloxane (PDMS) polymeric chains (pGO) was proposed. A controlled amount of PDMS is infused into the freeze-dried foam resulting into a very rigid structure with improved mechanical properties, such as tensile plasticity and toughness. The PDMS wets the graphene oxide sheets and acts like a glue bonding PDMS and GO sheets. In order to obtain further insights on mechanisms behind the enhanced mechanical pGO response we carried out fully atomistic molecular dynamics (MD) simulations. Based on MD results, we build up a structural model that can explain the experimentally observed mechanical behavior.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Differences in the Mechanical Properties of Monolayer and Multilayer WSe2/MoSe2
Authors:
Y. M. Jaques,
P. Manimunda,
Y. Nakanishi,
S. Susarla,
C. F. Woellner,
S. Bhowmick,
S. A. S. Asif,
D. S. Galvão,
C. S. Tiwary,
P. M. Ajayan
Abstract:
Transition metal dichalcogenides are 2D structures with remarkable electronic, chemical, optical and mechanical properties. Monolayer and crystal properties of these structures have been extensively investigated, but a detailed understanding of the properties of their few-layer structures are still missing. In this work we investigated the mechanical differences between monolayer and multilayer WS…
▽ More
Transition metal dichalcogenides are 2D structures with remarkable electronic, chemical, optical and mechanical properties. Monolayer and crystal properties of these structures have been extensively investigated, but a detailed understanding of the properties of their few-layer structures are still missing. In this work we investigated the mechanical differences between monolayer and multilayer WSe2 and MoSe2, through fully atomistic molecular dynamics simulations (MD). It was observed that single layer WSe2/MoSe2 deposited on silicon substrates have larger friction coefficients than 2, 3 and 4 layered structures. For all considered cases it is always easier to peel off and/or to fracture MoSe2 structures. These results suggest that the interactions between first layer and substrate are stronger than interlayer interactions themselves. Similar findings have been reported for other nanomaterials and it has been speculated whether this is a universal-like behavior for 2D layered materials. We have also analyzed fracture patterns. Our results show that fracture is chirality dependent with crack propagation preferentially perpendicular to W(Mo)-Se bonds and faster for zig-zag-like defects.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Schwarzites - A Fully Atomistic Reactive Molecular Dynamics Investigation
Authors:
Cristiano F. Woellner,
Tiago Botari,
Eric Perim,
Douglas S. Galvao
Abstract:
Schwarzites are crystalline, 3D porous structures with stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strains and energy absorption of four different Schwarzites, through reactive molecular dynamics…
▽ More
Schwarzites are crystalline, 3D porous structures with stable negative curvature formed of sp2-hybridized carbon atoms. These structures present topologies with tunable porous size and shape and unusual mechanical properties. In this work, we have investigated the mechanical behavior under compressive strains and energy absorption of four different Schwarzites, through reactive molecular dynamics simulations, using the ReaxFF force field as available in the LAMMPS code. We considered two Schwarzites families, the so-called Gyroid and Primitive and two structures from each family. Our results also show they exhibit remarkable resilience under mechanical compression. They can be reduced to half of their original size before structural failure (fracture) occurs.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.
-
Self-Driven Graphene Tearing and Peeling: A Fully Atomistic Molecular Dynamics Investigation
Authors:
Alexandre F. Fonseca,
Douglas S. Galvao
Abstract:
In spite of years of intense research, graphene continues to produce surprising results. Recently, it was experimentally observed that under certain conditions graphene can self-drive its tearing and peeling from substrates. This process can generate long, micrometer sized, folded nanoribbons without the action of any external forces. Also, during this cracking-like propagation process, the width…
▽ More
In spite of years of intense research, graphene continues to produce surprising results. Recently, it was experimentally observed that under certain conditions graphene can self-drive its tearing and peeling from substrates. This process can generate long, micrometer sized, folded nanoribbons without the action of any external forces. Also, during this cracking-like propagation process, the width of the graphene folded ribbon continuously decreases and the process only stops when the width reaches about few hundreds nanometers in size. It is believed that interplay between the strain energy of folded regions, breaking of carbon-carbon covalent bonds, and adhesion of graphene-graphene and graphene-substrate are the most fundamental features of this process, although the detailed mechanisms at atomic scale remain unclear. In order to gain further insights on these processes we carried out fully atomistic reactive molecular dynamics simulations using the AIREBO potential as available in the LAMMPS computational package. Although the reported tearing/peeling experimental observations were only to micrometer sized structures, our results showed that they could also occur at nanometer scale. Our preliminary results suggest that the graphene tearing/peeling process originates from thermal energy fluctuations that results in broken bonds, followed by strain release that creates a local elastic wave that can either reinforce the process, similar to a whip cracking propagation, or undermine it by producing carbon dangling bonds that evolve to the formation of bonds between the two layers of graphene. As the process continues in time and the folded graphene decreases in width, the carbon-carbon bonds at the ribbon edge and interlayer bonds get less stressed, thermal fluctuations become unable to break them and the process stops.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Molecular Dynamics Simulations of Ballistic Penetration of Pentagraphene Sheets
Authors:
David L. Azevedo,
Rafael A. Bizao,
Douglas S. Galvao
Abstract:
The superior mechanical properties and low density of carbon nanostructures make them promising ballistic protection materials, stimulating investigations on their high-strain-rate behavior. Recent experiments and simulations revealed graphene possesses exceptional energy absorption properties. In this work, we analyzed through fully atomistic molecular dynamics simulations the ballistic performan…
▽ More
The superior mechanical properties and low density of carbon nanostructures make them promising ballistic protection materials, stimulating investigations on their high-strain-rate behavior. Recent experiments and simulations revealed graphene possesses exceptional energy absorption properties. In this work, we analyzed through fully atomistic molecular dynamics simulations the ballistic performance of a carbon-based material recently proposed named penta-graphene. Our results show that the fracture pattern is more spherical (no petals formation like observed for graphene). The estimated penetration energy for pentagraphene structures considered here was of 37.69 MJ/Kg, far superior to graphene (29.8 MJ/Kg) under same conditions. These preliminary results are suggestive that pentagraphene could be an excellent material for ballistic applications.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Improving Graphene-metal Contacts: Thermal Induced Polishing
Authors:
Eliezer Fernando Oliveira,
Ricardo Paupitz Santos,
Pedro Alves da Silva Autreto,
Stanislav Moshkalev,
Douglas Soares Galvao
Abstract:
Graphene is a very promising material for nanoelectronics applications due to its unique and remarkable electronic and thermal properties. However, when deposited on metallic electrodes the overall thermal conductivity is significantly decreased. This phenomenon has been attributed to the mismatch between the interfaces and contact thermal resistance. Experimentally, one way to improve the graphen…
▽ More
Graphene is a very promising material for nanoelectronics applications due to its unique and remarkable electronic and thermal properties. However, when deposited on metallic electrodes the overall thermal conductivity is significantly decreased. This phenomenon has been attributed to the mismatch between the interfaces and contact thermal resistance. Experimentally, one way to improve the graphene/metal contact is thorough high-temperature annealing, but the detailed mechanisms behind these processes remain unclear. In order to address these questions, we carried out fully atomistic reactive molecular dynamics simulations using the ReaxFF force field to investigate the interactions between multi-layer graphene and metallic electrodes (nickel) under (thermal) annealing. Our results show that the annealing induces an upward-downward movement of the graphene layers, causing a pile-driver-like effect over the metallic surface. This graphene induced movements cause a planarization (thermal polishing-like effect) of the metallic surface, which results in the increase of the effective graphene/metal contact area. This can also explain the experimentally observed improvements of the thermal and electric conductivities.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Silver Hardening via Hypersonic Impacts
Authors:
Eliezer Fernando Oliveira,
Pedro Alves da Silva Autreto,
Douglas Soares Galvao
Abstract:
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This met…
▽ More
The search for new ultra strong materials has been a very active research area. With relation to metals, a successful way to improve their strength is by the creation of a gradient of nanograins (GNG) inside the material. Recently, R. Thevamaran et al. [Science v354, 312-316 (2016)] propose a single step method based on high velocity impact of silver nanocubes to produce high-quality GNG. This method consists of producing high impact collisions of silver cubes at hypersonic velocity (~400 m/s) against a rigid wall. Although they observed an improvement in the mechanical properties of the silver after the impact, the GNG creation and the strengthening mechanism at nanoscale remain unclear. In order to gain further insights about these mechanisms, we carried out fully atomistic molecular dynamics simulations (MD) to investigate the atomic conformations/rearrangements during and after high impact collisions of silver nanocubes at ultrasonic velocity. Our results indicate the co-existence of polycrystalline arrangements after the impact formed by core HCP domains surrounded by FCC ones, which could also contribute to explain the structural hardening.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Phagraphene Membranes: A Fully Atomistic Molecular Dynamics Investigation
Authors:
Jose M. de Sousa,
Acrisio L. Aguiar,
Eduardo C. Girao,
Alexandre F. Fonseca,
Antonio G. Sousa Filho,
Douglas S. Galvao
Abstract:
Recently, a new 2D carbon allotrope structure, named phagraphene (PG), was proposed. PG has a densely array of penta-hexa-hepta-graphene carbon rings. PG was shown to present low and anisotropic thermal conductivity and it is believed that this anisotropy should be also reflected in its mechanical properties. Although PG mechanical properties have been investigated, a detailed and comprehensive st…
▽ More
Recently, a new 2D carbon allotrope structure, named phagraphene (PG), was proposed. PG has a densely array of penta-hexa-hepta-graphene carbon rings. PG was shown to present low and anisotropic thermal conductivity and it is believed that this anisotropy should be also reflected in its mechanical properties. Although PG mechanical properties have been investigated, a detailed and comprehensive study is still lacking. In the present work we have carried out fully atomistic reactive molecular dynamics simulations using the ReaxFF force field, to investigate the mechanical properties and fracture patterns of PG membranes. The Young's modulus values of the PG membranes were estimated from the stress-strain curves. Our results show that these curves present three distinct regimes: one regime where ripples dominate the structure and mechanical properties of the PG membranes; an elastic regime where the membranes exhibit fully planar configurations; and finally a plastic regime where permanent deformations happened to the PG membrane up to the mechanical failure or fracture.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Mechanical Properties of Pentagraphene-based Nanotubes: A Molecular Dynamics Study
Authors:
Jose M. de Sousa,
Acrisio L. Aguiar,
Eduardo C. Girão,
Alexandre F. Fonseca,
Antonio G. Sousa Filho,
Douglas S. Galvao
Abstract:
The study of the mechanical properties of nanostructured systems has gained importance in theoretical and experimental research in recent years. Carbon nanotubes (CNTs) are one of the strongest nanomaterials found in nature, with Young's Modulus (YM) in the order 1.25 TPa. One interesting question is about the possibility of generating new nanostructures with 1D symmetry and with similar and/or su…
▽ More
The study of the mechanical properties of nanostructured systems has gained importance in theoretical and experimental research in recent years. Carbon nanotubes (CNTs) are one of the strongest nanomaterials found in nature, with Young's Modulus (YM) in the order 1.25 TPa. One interesting question is about the possibility of generating new nanostructures with 1D symmetry and with similar and/or superior CNT properties. In this work, we present a study on the dynamical, structural, mechanical properties, fracture patterns and YM values for one class of these structures, the so-called pentagraphene nanotubes (PGNTs). These tubes are formed rolling up pentagraphene membranes (which are quasi-bidimensional structures formed by densely compacted pentagons of carbon atoms in sp3 and sp2 hybridized states) in the same form that CNTs are formed from rolling up graphene membranes. We carried out fully atomistic molecular dynamics simulations using the ReaxFF force field. We have considered zigzag-like and armchair-like PGNTs of different diameters. Our results show that PGNTs present YM ~ 800 GPa with distinct elastic behavior in relation to CNTs, mainly associated with mechanical failure, chirality dependent fracture patterns and extensive structural reconstructions.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Structural Transformations of Carbon and Boron Nitride Nanoscrolls at High Impact Collisions
Authors:
Cristiano F. Woellner,
Leonardo D. Machado,
Pedro A. S. Autreto,
Jose M. de Sousa,
Douglas S. Galvao
Abstract:
The behavior of nanostructures under high strain-rate conditions has been object of theoretical and experimental investigations in recent years. For instance, it has been shown that carbon and boron nitride nanotubes can be unzipped into nanoribbons at high velocity impacts. However, the response of many nanostructures to high strain-rate conditions is still not completely understood. In this work…
▽ More
The behavior of nanostructures under high strain-rate conditions has been object of theoretical and experimental investigations in recent years. For instance, it has been shown that carbon and boron nitride nanotubes can be unzipped into nanoribbons at high velocity impacts. However, the response of many nanostructures to high strain-rate conditions is still not completely understood. In this work we have investigated through fully atomistic reactive (ReaxFF) molecular dynamics (MD) simulations the mechanical behavior of carbon (CNS) and boron nitride nanoscrolls (BNS) colliding against solid targets at high velocities,. CNS (BNS) nanoscrolls are graphene (boron nitride) membranes rolled up into papyrus-like structures. Their open-ended topology leads to unique properties not found in close-ended analogues, such as nanotubes. Our results show that the collision products are mainly determined by impact velocities and by two impact angles, which define the position of the scroll (i) axis and (ii) open edge relative to the target. Our MD results showed that for appropriate velocities and orientations large-scale deformations and nanoscroll fracture can occur. We also observed unscrolling (scrolls going back to quasi-planar membranes), scroll unzip** into nanoribbons, and significant reconstruction due to breaking and/or formation of new chemical bonds. For particular edge orientations and velocities, conversion from open to close-ended topology is also possible, due to the fusion of nanoscroll walls.
△ Less
Submitted 1 November, 2017;
originally announced November 2017.
-
Insights on the mechanism of water-alcohol separation in multilayer graphene oxide membranes: entropic versus enthalpic factors
Authors:
Daiane Damasceno Borges,
Cristiano F. Woellner,
Pedro A. S. Autreto,
Douglas S. Galvao
Abstract:
Experimental evidences have shown that graphene oxide (GO) can be impermeable to liquids, vapors and gases, while it allows a fast permeation of water molecules. The understanding of filtration mechanisms came mostly from studies dedicated to water desalination, while very few works have been dedicated to distilling alcohols. In this work, we have investigated the molecular level mechanism underly…
▽ More
Experimental evidences have shown that graphene oxide (GO) can be impermeable to liquids, vapors and gases, while it allows a fast permeation of water molecules. The understanding of filtration mechanisms came mostly from studies dedicated to water desalination, while very few works have been dedicated to distilling alcohols. In this work, we have investigated the molecular level mechanism underlying the alcohol/water separation inside GO membranes. A series of molecular dynamics and Grand-Canonical Monte Carlo simulations were carried out to probe the ethanol/water and methanol/water separation through GO membranes composed of multiple layered graphene-based sheets with different interlayer distance values and number of oxygen-containing functional groups. Our results show that the size exclusion and membrane affinities are not sufficient to explain the selectivity. Besides that, the favorable water molecular arrangement inside GO 2D-channels forming a robust H-bond network and the fast water diffusion are crucial for an effective separation mechanism. In other words, the separation phenomenon is not only governed by affinities with the membrane (enthalpic mechanisms) but mainly by the geometry and size factors (entropic mechanisms). We verified that the 2D geometry channel with optimal interlayer distance are key factors for designing more efficient alcohol-water separation membranes. Our findings are consistent with the available experimental data and contribute to clarify important aspects of the separation behavior of confined alcohol/water in GO membranes.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Synthesis, characterization and computational simulation of graphene nanoplatelets stabilized in poly(styrene sulfonate) sodium salt
Authors:
Celina M. Miyazaki,
Marco A. E. Maria,
Daiane Damasceno Borges,
Cristiano F. Woellner,
Gustavo Brunetto,
Alexandre F. Fonseca,
Carlos J. L. Constantino,
Marcelo A. Pereira-da-Silva,
Abner de Siervo,
Douglas S. Galvao,
Antonio Riul Jr
Abstract:
The production of large area interfaces and the use of scalable methods to build-up designed nanostructures generating advanced functional properties are of high interest for many materials science applications. Nevertheless, large area coverage remains a major problem for pristine graphene and here we present a hybrid, composite graphene-like material soluble in water, which can be exploited in m…
▽ More
The production of large area interfaces and the use of scalable methods to build-up designed nanostructures generating advanced functional properties are of high interest for many materials science applications. Nevertheless, large area coverage remains a major problem for pristine graphene and here we present a hybrid, composite graphene-like material soluble in water, which can be exploited in many areas, such as energy storage, electrodes fabrication, selective membranes and biosensing. Graphene oxide (GO) was produced by the traditional Hummers method being further reduced in the presence of poly(styrene sulfonate) sodium salt (PSS), thus creating stable reduced graphene oxide (rGO) nanoplateles wrapped by PSS (GPSS). Molecular dynamics simulations were carried out of further clarify the interactions between PSS molecules and rGO nanoplatelets, with calculations supported by FTIR analysis. The intermolecular forces between rGO nanoplatelets and PSS lead to the formation of a hybrid material (GPSS) stabilized by van der Waals forces, allowing the fabrication of high quality layer-by-layer (LbL) films with polyalillamine hydrochloride (PAH). Raman and electrical characterizations corroborated the successful modifications in the electronic structures from GO to GPSS after the chemical treatment, resulting in (PAH/GPSS) LbL films four orders of magnitude more conductive than (PAH/GO).
△ Less
Submitted 30 May, 2017;
originally announced May 2017.
-
Mechanical Properties and Fracture Patterns of Pentagraphene Membranes
Authors:
J. M. de Sousa,
A. L. Aguiar,
E. C. Girao,
Alexandre F. Fonseca,
A. G. Souza Filho,
Douglas S. Galvao
Abstract:
Recently, a new two-dimensional carbon allotrope called pentagraphene (PG) was proposed. PG exhibits mechanical and electronic interesting properties, including typical band gap values of semiconducting materials. PG has a Cairo-tiling-like 2D lattice of non coplanar pentagons and its mechanical properties have not been yet fully investigated. In this work, we combined density functional theory (D…
▽ More
Recently, a new two-dimensional carbon allotrope called pentagraphene (PG) was proposed. PG exhibits mechanical and electronic interesting properties, including typical band gap values of semiconducting materials. PG has a Cairo-tiling-like 2D lattice of non coplanar pentagons and its mechanical properties have not been yet fully investigated. In this work, we combined density functional theory (DFT) calculations and reactive molecular dynamics (MD) simulations to investigate the mechanical properties and fracture patterns of PG membranes under tensile strain. We show that PG membranes can hold up to 20% of strain and that fracture occurs only after substantial dynamical bond breaking and the formation of 7, 8 and 11 carbon rings and carbon chains. The stress-strain behavior was observed to follow two regimes, one exhibiting linear elasticity followed by a plastic one, involving carbon atom re-hybridization with the formation of carbon rings and chains. Our results also show that mechanically induced structural transitions from PG to graphene is unlikely to occur, in contrast to what was previously speculated in the literature.
△ Less
Submitted 10 March, 2017;
originally announced March 2017.
-
Mechanical Properties and Fracture Patterns of Graphene (Graphitic) Nanowiggles
Authors:
Rafael A. Bizao,
Tiago Botari,
Eric Perim,
Nicola M. Pugno,
Douglas S. Galvao
Abstract:
Graphene nanowiggles (GNW) are graphene-based nanostructures obtained by making alternated regular cuts in pristine graphene nanoribbons. GNW were recently synthesized and it was demonstrated that they exhibit tunable electronic and magnetic properties by just varying their shape. Here, we have investigated the mechanical properties and fracture patterns of a large number of GNW of different shape…
▽ More
Graphene nanowiggles (GNW) are graphene-based nanostructures obtained by making alternated regular cuts in pristine graphene nanoribbons. GNW were recently synthesized and it was demonstrated that they exhibit tunable electronic and magnetic properties by just varying their shape. Here, we have investigated the mechanical properties and fracture patterns of a large number of GNW of different shapes and sizes using fully atomistic reactive molecular dynamics simulations. Our results show that the GNW mechanical properties are strongly dependent on its shape and size and, as a general trend narrow sheets have larger ultimate strength and Young's modulus than wide ones. The estimated Young's modulus values were found to be in a range of ~ 100-1000 GPa and the ultimate strength in a range of ~ 20-110 GPa, depending on GNW shape. Also, super-ductile behaviour under strain was observed for some structures.
△ Less
Submitted 3 February, 2017;
originally announced February 2017.
-
Water Permeation through Layered Graphene-based Membranes: A Fully Atomistic Molecular Dynamics Investigation
Authors:
Daiane D. Borges,
Cristiano F. Woellner,
Pedro A. S. Autreto,
Douglas S. Galvao
Abstract:
Graphene-based membranes have been investigated as promising candidates for water filtration and gas separation applications. Experimental evidences have shown that graphene oxide can be impermeable to liquids, vapors and gases, while allowing a fast permeation of water molecules. This phenomenon has been attributed to the formation of a network of nano capillaries that allow nearly frictionless w…
▽ More
Graphene-based membranes have been investigated as promising candidates for water filtration and gas separation applications. Experimental evidences have shown that graphene oxide can be impermeable to liquids, vapors and gases, while allowing a fast permeation of water molecules. This phenomenon has been attributed to the formation of a network of nano capillaries that allow nearly frictionless water flow while blocking other molecules by steric hindrance effects. It is supposed that water molecules are transported through the percolated two-dimensional channels formed between graphene-based sheets. Although these channels allow fast water permeation in such materials, the flow rates are strongly dependent on how the membranes are fabricated. Also, some fundamental issues regarding the nanoscale mechanisms of water permeation are still not fully understood and their interpretation remains controversial. In this work, we have investigated the dynamics of water permeation through pristine graphene and graphene oxide model membranes. We have carried out fully atomistic classical molecular dynamics simulations of systems composed of multiple layered graphene-based sheets into contact with a water reservoir under controlled thermodynamics conditions (e. g., by varying temperature and pressure values). We have systematically analyzed how the transport dynamics of the confined nanofluids depend on the interlayer distances and the role of the oxide functional groups. Our results show the water flux is much more effective for graphene than for graphene oxide membranes. These results are attributed to the H-bonds formation between oxide functional groups and water, which traps the water molecules and precludes ultrafast water transport through the nanochannels.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Scale Effects on the Ballistic Penetration of Graphene Sheets
Authors:
Rafael A. Bizao,
Leonardo D. Machado,
Jose M. de Sousa,
Nicola M. Pugno,
Douglas S. Galvao
Abstract:
Carbon nanostructures are promising ballistic protection materials, due to their low density and excellent mechanical properties. Recent experimental and computational investigations on the behavior of graphene under impact conditions revealed exceptional energy absorption properties as well. However, the reported numerical and experimental values differ by an order of magnitude. In this work, we…
▽ More
Carbon nanostructures are promising ballistic protection materials, due to their low density and excellent mechanical properties. Recent experimental and computational investigations on the behavior of graphene under impact conditions revealed exceptional energy absorption properties as well. However, the reported numerical and experimental values differ by an order of magnitude. In this work, we combined numerical and analytical modeling to address this issue. In the numerical part, we employed reactive molecular dynamics to carry out ballistic tests on single and double-layered graphene sheets. We used velocity values within the range tested in experiments. Our numerical and the experimental results were used to determine parameters for a scaling law, which is in good agreement with all experimental and simulation results. We find that the specific penetration energy decreases as the number of layers (N) increases, from ~25 MJ/kg for N=1 to ~0.26 MJ/kg as N goes to infinity. These scale effects explain the apparent discrepancy between simulations and experiments.
△ Less
Submitted 25 January, 2017;
originally announced January 2017.
-
Hydrogenation Dynamics of Biphenylene Carbon (Graphenylene) Membranes
Authors:
Vinicius Splugues,
Pedro Alves da Silva Autreto,
Douglas S. Galvao
Abstract:
The advent of graphene created a revolution in materials science. Because of this there is a renewed interest in other carbon-based structures. Graphene is the ultimate (just one atom thick) membrane. It has been proposed that graphene can work as impermeable membrane to standard gases, such argon and helium. Graphene-like porous membranes, but presenting larger porosity and potential selectivity…
▽ More
The advent of graphene created a revolution in materials science. Because of this there is a renewed interest in other carbon-based structures. Graphene is the ultimate (just one atom thick) membrane. It has been proposed that graphene can work as impermeable membrane to standard gases, such argon and helium. Graphene-like porous membranes, but presenting larger porosity and potential selectivity would have many technological applications. Biphenylene carbon (BPC), sometimes called graphenylene, is one of these structures. BPC is a porous two-dimensional (planar) allotrope carbon, with its pores resembling typical sieve cavities and/or some kind of zeolites. In this work, we have investigated the hydrogenation dynamics of BPC membranes under different conditions (hydrogenation plasma density, temperature, etc.). We have carried out an extensive study through fully atomistic molecular dynamics (MD) simulations using the reactive force field ReaxFF, as implemented in the well-known Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) code. Our results show that the BPC hydrogenation processes exhibit very complex patterns and the formation of correlated domains (hydrogenated islands) observed in the case of graphene hydrogenation was also observed here. MD results also show that under hydrogenation BPC structure undergoes a change in its topology, the pores undergoing structural transformations and extensive hydrogenation can produce significant structural damages, with the formation of large defective areas and large structural holes, leading to structural collapse.
△ Less
Submitted 23 January, 2017;
originally announced January 2017.