Showing 1–50 of 67 results for author: Gallagher, M

A 260 pc resolution ALMA map of HCN(1-0) in the galaxy NGC 4321

Authors: Lukas Neumann, Frank Bigiel, Ashley T. Barnes, Molly J. Gallagher, Adam Leroy, Antonio Usero, Erik Rosolowsky, Ivana Bešlić, Médéric Boquien, Yixian Cao, Mélanie Chevance, Dario Colombo, Daniel A. Dale, Cosima Eibensteiner, Kathryn Grasha, Jonathan D. Henshaw, María J. Jiménez-Donaire, Sharon Meidt, Shyam H. Menon, Eric J. Murphy, Hsi-An Pan, Miguel Querejeta, Toshiki Saito, Eva Schinnerer, Sophia K. Stuber , et al. (2 additional authors not shown)

Abstract: The star formation rate (SFR) is tightly connected to the amount of dense gas in molecular clouds. However, it is not fully understood how the relationship between dense molecular gas and star formation varies within galaxies and in different morphological environments. In this work, we study dense gas and star formation in the nearby spiral galaxy NGC 4321 to test how the amount of dense gas and… ▽ More The star formation rate (SFR) is tightly connected to the amount of dense gas in molecular clouds. However, it is not fully understood how the relationship between dense molecular gas and star formation varies within galaxies and in different morphological environments. In this work, we study dense gas and star formation in the nearby spiral galaxy NGC 4321 to test how the amount of dense gas and its ability to form stars varies with environmental properties at 260 pc scales. We present new ALMA observations of HCN(1-0) line emission. Combined with existing CO(2-1) observations from ALMA, and H-alpha from MUSE, as well as F2100W from JWST to trace the SFR, we measure the HCN/CO line ratio, a proxy for the dense gas fraction and SFR/HCN, a proxy for the star formation efficiency of the dense gas. Towards the centre of the galaxy, HCN/CO systematically increases while SFR/HCN decreases, but these ratios stay roughly constant throughout the disc. Spiral arms, interarm regions, and bar ends show similar HCN/CO and SFR/HCN. On the bar, there is a significantly lower SFR/HCN at a similar HCN/CO. We conclude that the centres of galaxies show the strongest environmental influence on dense gas and star formation, suggesting either that clouds couple strongly to the surrounding pressure or that HCN is tracing more of the bulk molecular gas that is less efficiently converted into stars. On the contrary, across the disc of NGC 4321, where the ISM pressure is typically low, SFR/HCN does not show large variations (< 0.3 dex) in agreement with Galactic observations of molecular clouds. Despite the large variations across environments and physical conditions, HCN/CO is a good predictor of the mean molecular gas surface density at 260 pc scales. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 18 pages, 9 figures, accepted for pub in A&A, Jun 13, 2024

Estimating Value at Risk and Expected Shortfall: A Brief Review and Some New Developments

Authors: Kanon Kamronnaher, Andrew Bellucco, Whitney K. Huang, Colin M. Gallagher

Abstract: Value-at-risk (VaR) and expected shortfall (ES) are two commonly utilized metrics for quantifying financial risk. In this study, we review the widely employed Generalized Autoregressive Conditional Heteroskedasticity (GARCH) models. These models are explored with diverse distributional assumptions on innovation, including parametric, non-parametric, and `semi-parametric' that incorporates a parame… ▽ More Value-at-risk (VaR) and expected shortfall (ES) are two commonly utilized metrics for quantifying financial risk. In this study, we review the widely employed Generalized Autoregressive Conditional Heteroskedasticity (GARCH) models. These models are explored with diverse distributional assumptions on innovation, including parametric, non-parametric, and `semi-parametric' that incorporates a parametric tail distribution based on extreme value theory. Additionally, we introduce a non-parametric local linear quantile autoregression (LLQAR) with kernel weights depending on the distance between the current loss and past losses, and decreasing in the time lag. To evaluate the performance of different methods for VaR and ES estimation, we employ a multi-criteria approach. This involves mean squared error assessment using simulated data, backtesting on both simulated data and US stocks, and application of the ESBootstrap test. The LLQAR method, which does not necessarily require stationarity assumptions, seems to perform better for simulated non-stationary data as well as real-world data, for estimating VaR and ES. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 54 pages, 21 figures

MSC Class: 62-08

Exploring and Analyzing Wildland Fire Data Via Machine Learning Techniques

Authors: Dipak Dulal, Joseph J. Charney, Michael Gallagher, Carmeliza Navasca, Nicholas Skowronski

Abstract: This research project investigated the correlation between a 10 Hz time series of thermocouple temperatures and turbulent kinetic energy (TKE) computed from wind speeds collected from a small experimental prescribed burn at the Silas Little Experimental Forest in New Jersey, USA. The primary objective of this project was to explore the potential for using thermocouple temperatures as predictors fo… ▽ More This research project investigated the correlation between a 10 Hz time series of thermocouple temperatures and turbulent kinetic energy (TKE) computed from wind speeds collected from a small experimental prescribed burn at the Silas Little Experimental Forest in New Jersey, USA. The primary objective of this project was to explore the potential for using thermocouple temperatures as predictors for estimating the TKE produced by a wildland fire. Machine learning models, including Deep Neural Networks, Random Forest Regressor, Gradient Boosting, and Gaussian Process Regressor, are employed to assess the potential for thermocouple temperature perturbations to predict TKE values. Data visualization and correlation analyses reveal patterns and relationships between thermocouple temperatures and TKE, providing insight into the underlying dynamics. The project achieves high accuracy in predicting TKE by employing various machine learning models despite a weak correlation between the predictors and the target variable. The results demonstrate significant success, particularly from regression models, in accurately estimating the TKE. The research findings contribute to fire behavior and smoke modeling science, emphasizing the importance of incorporating machine learning approaches and identifying complex relationships between fine-scale fire behavior and turbulence. Accurate TKE estimation using thermocouple temperatures allows for the refinement of models that can inform decision-making in fire management strategies, facilitate effective risk mitigation, and optimize fire management efforts. This project highlights the valuable role of machine learning techniques in analyzing wildland fire data, showcasing their potential to advance fire research and management practices. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Synthesis of a mesoscale ordered 2D-conjugated polymer with semiconducting properties

Authors: Gianluca Galeotti, Fabrizio De Marchi, Ehsan Hamzehpoor, Oliver MacLean, Malakalapalli Rajeswara Rao, Yulan Chen, Lucas Vazquez Besteiro, Dominik Dettmann, Luisa Ferrari, Federico Frezza, Polina M. Sheverdyaeva, R. Liu, Asish K. Kundu, Paolo Moras, Maryam Ebrahimi, Mark C. Gallagher, Federico Rosei, Dmytro F. Perepichka, Giorgio Contini

Abstract: 2D materials with high charge carrier mobility and tunable electronic band gaps have attracted intense research effort for their potential use as active components in nanoelectronics. 2D-conjugated polymers (2DCP) constitute a promising sub-class due to the fact that the electronic band structure can be manipulated by varying the molecular building blocks, while at the same time preserving the key… ▽ More 2D materials with high charge carrier mobility and tunable electronic band gaps have attracted intense research effort for their potential use as active components in nanoelectronics. 2D-conjugated polymers (2DCP) constitute a promising sub-class due to the fact that the electronic band structure can be manipulated by varying the molecular building blocks, while at the same time preserving the key features of 2D materials such as Dirac cones and high charge mobility. The major challenge for their use in technological applications is to fabricate mesoscale ordered 2DCP networks since current synthetic routes yield only small domains with a high density of defects. Here we demonstrate the synthesis of a mesoscale ordered 2DCP with semiconducting properties and Dirac cone structures via Ullmann coupling on Au(111). This material has been obtained by combining rigid azatriangulene precursors and a hot dosing approach which favours molecular diffusion and reduces the formation of voids in the network. These results open opportunities for the synthesis of 2DCP Dirac cone materials and their integration into devices. △ Less

Submitted 7 July, 2023; originally announced July 2023.

Comments: 21 pages, 3 figures

Journal ref: Nature Materials 19, 874-880 (2020)

Modularity based linkage model for neuroevolution

Authors: Yukai Qiao, Marcus Gallagher

Abstract: Crossover between neural networks is considered disruptive due to the strong functional dependency between connection weights. We propose a modularity-based linkage model at the weight level to preserve functionally dependent communities (building blocks) in neural networks during mixing. A proximity matrix is built by estimating the dependency between weights, then a community detection algorithm… ▽ More Crossover between neural networks is considered disruptive due to the strong functional dependency between connection weights. We propose a modularity-based linkage model at the weight level to preserve functionally dependent communities (building blocks) in neural networks during mixing. A proximity matrix is built by estimating the dependency between weights, then a community detection algorithm maximizing modularity is run on the graph described by such matrix. The resulting communities/groups of parameters are considered to be mutually independent and used as crossover masks in an optimal mixing EA. A variant is tested with an operator that neutralizes the permutation problem of neural networks to a degree. Experiments were performed on 8 and 10-bit parity problems as the intrinsic hierarchical nature of the dependencies in these problems are challenging to learn. The results show that our algorithm finds better, more functionally dependent linkage which leads to more successful crossover and better performance. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Pittsburgh Learning Classifier Systems for Explainable Reinforcement Learning: Comparing with XCS

Authors: Jordan T. Bishop, Marcus Gallagher, Will N. Browne

Abstract: Interest in reinforcement learning (RL) has recently surged due to the application of deep learning techniques, but these connectionist approaches are opaque compared with symbolic systems. Learning Classifier Systems (LCSs) are evolutionary machine learning systems that can be categorised as eXplainable AI (XAI) due to their rule-based nature. Michigan LCSs are commonly used in RL domains as the… ▽ More Interest in reinforcement learning (RL) has recently surged due to the application of deep learning techniques, but these connectionist approaches are opaque compared with symbolic systems. Learning Classifier Systems (LCSs) are evolutionary machine learning systems that can be categorised as eXplainable AI (XAI) due to their rule-based nature. Michigan LCSs are commonly used in RL domains as the alternative Pittsburgh systems (e.g. SAMUEL) suffer from complex algorithmic design and high computational requirements; however they can produce more compact/interpretable solutions than Michigan systems. We aim to develop two novel Pittsburgh LCSs to address RL domains: PPL-DL and PPL-ST. The former acts as a "zeroth-level" system, and the latter revisits SAMUEL's core Monte Carlo learning mechanism for estimating rule strength. We compare our two Pittsburgh systems to the Michigan system XCS across deterministic and stochastic FrozenLake environments. Results show that PPL-ST performs on-par or better than PPL-DL and outperforms XCS in the presence of high levels of environmental uncertainty. Rulesets evolved by PPL-ST can achieve higher performance than those evolved by XCS, but in a more parsimonious and therefore more interpretable fashion, albeit with higher computational cost. This indicates that PPL-ST is an LCS well-suited to producing explainable policies in RL domains. △ Less

Submitted 17 May, 2023; originally announced May 2023.

A Genetic Fuzzy System for Interpretable and Parsimonious Reinforcement Learning Policies

Authors: Jordan T. Bishop, Marcus Gallagher, Will N. Browne

Abstract: Reinforcement learning (RL) is experiencing a resurgence in research interest, where Learning Classifier Systems (LCSs) have been applied for many years. However, traditional Michigan approaches tend to evolve large rule bases that are difficult to interpret or scale to domains beyond standard mazes. A Pittsburgh Genetic Fuzzy System (dubbed Fuzzy MoCoCo) is proposed that utilises both multiobject… ▽ More Reinforcement learning (RL) is experiencing a resurgence in research interest, where Learning Classifier Systems (LCSs) have been applied for many years. However, traditional Michigan approaches tend to evolve large rule bases that are difficult to interpret or scale to domains beyond standard mazes. A Pittsburgh Genetic Fuzzy System (dubbed Fuzzy MoCoCo) is proposed that utilises both multiobjective and cooperative coevolutionary mechanisms to evolve fuzzy rule-based policies for RL environments. Multiobjectivity in the system is concerned with policy performance vs. complexity. The continuous state RL environment Mountain Car is used as a testing bed for the proposed system. Results show the system is able to effectively explore the trade-off between policy performance and complexity, and learn interpretable, high-performing policies that use as few rules as possible. △ Less

Submitted 16 May, 2023; originally announced May 2023.

The ALMOND Survey: Molecular cloud properties and gas density tracers across 25 nearby spiral galaxies with ALMA

Authors: Lukas Neumann, Molly J. Gallagher, Frank Bigiel, Adam K. Leroy, Ashley T. Barnes, Antonio Usero, Jakob S. den Brok, Francesco Belfiore, Ivana Bešlić, Yixian Cao, Mélanie Chevance, Daniel A. Dale, Cosima Eibensteiner, Simon C. O. Glover, Kathryn Grasha, Jonathan D. Henshaw, María J. Jiménez-Donaire, Ralf S. Klessen, J. M. Diederik Kruijssen, Daizhong Liu, Sharon Meidt, Jérôme Pety, Johannes Puschnig, Miguel Querejeta, Erik Rosolowsky , et al. (6 additional authors not shown)

Abstract: We use new HCN(1-0) data from the ALMOND (ACA Large-sample Map** Of Nearby galaxies in Dense gas) survey to trace the kpc-scale molecular gas density structure and CO(2-1) data from PHANGS-ALMA to trace the bulk molecular gas across 25 nearby, star-forming galaxies. At 2.1 kpc scale, we measure the density-sensitive HCN/CO line ratio and the SFR/HCN ratio to trace the star formation efficiency i… ▽ More We use new HCN(1-0) data from the ALMOND (ACA Large-sample Map** Of Nearby galaxies in Dense gas) survey to trace the kpc-scale molecular gas density structure and CO(2-1) data from PHANGS-ALMA to trace the bulk molecular gas across 25 nearby, star-forming galaxies. At 2.1 kpc scale, we measure the density-sensitive HCN/CO line ratio and the SFR/HCN ratio to trace the star formation efficiency in the denser molecular medium. At 150 pc scale, we measure structural and dynamical properties of the molecular gas via CO(2-1) line emission, which is linked to the lower resolution data using an intensity-weighted averaging method. We find positive correlations (negative) of HCN/CO (SFR/HCN) with the surface density, the velocity dispersion and the internal turbulent pressure of the molecular gas. These observed correlations agree with expected trends from turbulent models of star formation, which consider a single free-fall time gravitational collapse. Our results show that the kpc-scale HCN/CO line ratio is a powerful tool to trace the 150 pc scale average density distribution of the molecular clouds. Lastly, we find systematic variations of the SFR/HCN ratio with cloud-scale molecular gas properties, which are incompatible with a universal star formation efficiency. Overall, these findings show that mean molecular gas density, molecular cloud properties and star formation are closely linked in a coherent way, and observations of density-sensitive molecular gas tracers are a useful tool to analyse these variations, linking molecular gas physics to stellar output across galaxy discs. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Comments: 48 pages, 40 figures

Continued PSP/WISPR Observations of a Phaethon-related Dust Trail

Authors: Karl Battams, Angel J. Gutarra-Leon, Brendan M. Gallagher, Matthew M. Knight, Guillermo Stenborg, Sarah Tanner, Mark G. Linton, Jamey R. Szalay, Michael S. P. Kelley, Russell A. Howard

Abstract: We present an update to the first white-light detections of a dust trail observed closely following the orbit of asteroid (3200) Phaethon, as seen by the Wide-field Imager for Parker Solar Probe (WISPR) instrument on the NASA Parker Solar Probe (PSP) mission. Here we provide a summary and analysis of observations of the dust trail over nine separate mission encounters between October 2018 and Augu… ▽ More We present an update to the first white-light detections of a dust trail observed closely following the orbit of asteroid (3200) Phaethon, as seen by the Wide-field Imager for Parker Solar Probe (WISPR) instrument on the NASA Parker Solar Probe (PSP) mission. Here we provide a summary and analysis of observations of the dust trail over nine separate mission encounters between October 2018 and August 2021 that saw the spacecraft approach to within 0.0277 au of the orbit of Phaethon. We find the photometric and estimated dust mass properties to be inline with those in the initial publication, with a visual (V) magnitude of approximately 16.1$\pm$0.3 per pixel, corresponding to a surface brightness of 26.1 mag arcsec$^{-2}$, and an estimated mass of dust within the range $10^{10}$ kg - $10^{12}$ kg depending on the assumed dust properties. However, the key finding of this survey is the discovery that the dust trail does not perfectly follow the orbit of Phaethon, with a clear separation noted between them that increases as a function of true anomaly, though the trail may differ from Phaethon's orbit by as little as 1-degree in periapsis. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: 25 pages, 14 figures; Accepted for publication in Astrophysical Journal (Jul 25, 2022)

Overview of the remote sensing observations from PSP solar encounter 10 with perihelion at 13.3 Rsun

Authors: Russell A. Howard, Guillermo Stenborg, Angelos Vourlidas, Brendan M. Gallagher, Mark G. Linton, Phillip Hess, Nathan B. Rich, Paulett C. Liewer

Abstract: The closest perihelion pass of Parker Solar Probe (PSP), so far, occurred between 16 and 26 of November 2021 and reached ~13.29 Rsun from Sun center. This pass resulted in very unique observations of the solar corona by the Wide-field Instrument for Solar PRobe (WISPR). WISPR observed at least ten CMEs, some of which were so close that the structures appear distorted. All of the CMEs appeared to h… ▽ More The closest perihelion pass of Parker Solar Probe (PSP), so far, occurred between 16 and 26 of November 2021 and reached ~13.29 Rsun from Sun center. This pass resulted in very unique observations of the solar corona by the Wide-field Instrument for Solar PRobe (WISPR). WISPR observed at least ten CMEs, some of which were so close that the structures appear distorted. All of the CMEs appeared to have a magnetic flux rope (MFR) structure and most were oriented such that the view was along the axis orientation, revealing very complex interiors. Two CMEs had a small MFR develop in the interior, with a bright circular boundary surrounding a very dark interior. Trailing the larger CMEs were substantial outflows of small blobs and flux-rope like structures within striated ribbons, lasting for many hours. When the heliophysics plasma sheet (HPS) was inclined, as it was during the days around perihelion on November 21, 2021, the outflow was over a very wide latitude range. One CME was overtaken by a faster one, with a resultant compression of the rear of the leading CME and an unusual expansion in the trailing CME. The small Thomson Surface creates brightness variations of structures as they pass through the field of view. In addition to this dynamic activity, a brightness band from excess dust along the orbit of asteroid/comet 3200 Phaethon is also seen for several days. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: 28 pages, 15 figures, accepted to ApJ

Axonemal regulation by curvature explains sperm flagellar waveform modulation

Authors: Meurig T Gallagher, Jackson C Kirkman-Brown, David J Smith

Abstract: Flagellar motility is critical to natural and many forms of assisted reproduction. Rhythmic beating and wave propagation by the flagellum propels sperm through fluid and enables modulation between penetrative progressive motion, activated side-to-side yaw and hyperactivated motility associated with detachment from epithelial binding. These motility changes occur in response to the properties of th… ▽ More Flagellar motility is critical to natural and many forms of assisted reproduction. Rhythmic beating and wave propagation by the flagellum propels sperm through fluid and enables modulation between penetrative progressive motion, activated side-to-side yaw and hyperactivated motility associated with detachment from epithelial binding. These motility changes occur in response to the properties of the surrounding fluid environment, biochemical activation state, and physiological ligands, however a parsimonious mechanistic explanation of flagellar beat generation that can explain motility modulation is lacking. In this paper we present the Axonemal Regulation of Curvature, Hysteretic model (ARCH), a curvature control-type theory based on switching of active moment by local curvature, embedded within a geometrically nonlinear elastic model of the flagellum exhibiting planar flagellar beats, together with nonlocal viscous fluid dynamics. The biophysical system is parameterised completely by four dimensionless parameter grou**s. The effect of parameter variation is explored through computational simulation, revealing beat patterns that are qualitatively representative of penetrative (straight progressive), activated (highly yawing) and hyperactivated (non-progressive) modes. Anaylsis of the flagellar limit cycles and associated swimming velocity reveals a cusp catastrophe between progressive and non-progressive modes, and hysteresis in the response to changes in critical curvature parameter. Quantitative comparison to experimental data on human sperm exhibiting typical penetrative, activated and hyperactivated beats shows a good fit to the time-average absolute curvature profile along the flagellum, providing evidence that the model is capable of providing a framework for quantitative interpretation of imaging data. △ Less

Submitted 1 March, 2023; v1 submitted 20 July, 2022; originally announced July 2022.

Comments: 14 pages, 4 figures main manuscript

MSC Class: 76P05

Modularity in NEAT Reinforcement Learning Networks

Authors: Humphrey Munn, Marcus Gallagher

Abstract: Modularity is essential to many well-performing structured systems, as it is a useful means of managing complexity [8]. An analysis of modularity in neural networks produced by machine learning algorithms can offer valuable insight into the workings of such algorithms and how modularity can be leveraged to improve performance. However, this property is often overlooked in the neuroevolutionary lit… ▽ More Modularity is essential to many well-performing structured systems, as it is a useful means of managing complexity [8]. An analysis of modularity in neural networks produced by machine learning algorithms can offer valuable insight into the workings of such algorithms and how modularity can be leveraged to improve performance. However, this property is often overlooked in the neuroevolutionary literature, so the modular nature of many learning algorithms is unknown. This property was assessed on the popular algorithm "NeuroEvolution of Augmenting Topologies" (NEAT) for standard simulation benchmark control problems due to NEAT's ability to optimise network topology. This paper shows that NEAT networks seem to rapidly increase in modularity over time with the rate and convergence dependent on the problem. Interestingly, NEAT tends towards increasingly modular networks even when network fitness converges. It was shown that the ideal level of network modularity in the explored parameter space is highly dependent on other network variables, dispelling theories that modularity has a straightforward relationship to network performance. This is further proven in this paper by demonstrating that rewarding modularity directly did not improve fitness. △ Less

Submitted 13 May, 2022; originally announced May 2022.

Comments: 6 pages, 7 figures

MSC Class: 68T07

Approximate discounting-free policy evaluation from transient and recurrent states

Authors: Vektor Dewanto, Marcus Gallagher

Abstract: In order to distinguish policies that prescribe good from bad actions in transient states, we need to evaluate the so-called bias of a policy from transient states. However, we observe that most (if not all) works in approximate discounting-free policy evaluation thus far are developed for estimating the bias solely from recurrent states. We therefore propose a system of approximators for the bias… ▽ More In order to distinguish policies that prescribe good from bad actions in transient states, we need to evaluate the so-called bias of a policy from transient states. However, we observe that most (if not all) works in approximate discounting-free policy evaluation thus far are developed for estimating the bias solely from recurrent states. We therefore propose a system of approximators for the bias (specifically, its relative value) from transient and recurrent states. Its key ingredient is a seminorm LSTD (least-squares temporal difference), for which we derive its minimizer expression that enables approximation by sampling required in model-free reinforcement learning. This seminorm LSTD also facilitates the formulation of a general unifying procedure for LSTD-based policy value approximators. Experimental results validate the effectiveness of our proposed method. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: 28 pages

Graph Neural Network-based Android Malware Classification with Jum** Knowledge

Authors: Wai Weng Lo, Siamak Layeghy, Mohanad Sarhan, Marcus Gallagher, Marius Portmann

Abstract: This paper presents a new Android malware detection method based on Graph Neural Networks (GNNs) with Jum**-Knowledge (JK). Android function call graphs (FCGs) consist of a set of program functions and their inter-procedural calls. Thus, this paper proposes a GNN-based method for Android malware detection by capturing meaningful intra-procedural call path patterns. In addition, a Jum**-Knowled… ▽ More This paper presents a new Android malware detection method based on Graph Neural Networks (GNNs) with Jum**-Knowledge (JK). Android function call graphs (FCGs) consist of a set of program functions and their inter-procedural calls. Thus, this paper proposes a GNN-based method for Android malware detection by capturing meaningful intra-procedural call path patterns. In addition, a Jum**-Knowledge technique is applied to minimize the effect of the over-smoothing problem, which is common in GNNs. The proposed method has been extensively evaluated using two benchmark datasets. The results demonstrate the superiority of our approach compared to state-of-the-art approaches in terms of key classification metrics, which demonstrates the potential of GNNs in Android malware detection and classification. △ Less

Submitted 13 June, 2022; v1 submitted 19 January, 2022; originally announced January 2022.

Comments: will be appeared in IEEE Conference on Dependable and Secure Computing 2022

From Zero-Shot Machine Learning to Zero-Day Attack Detection

Authors: Mohanad Sarhan, Siamak Layeghy, Marcus Gallagher, Marius Portmann

Abstract: The standard ML methodology assumes that the test samples are derived from a set of pre-observed classes used in the training phase. Where the model extracts and learns useful patterns to detect new data samples belonging to the same data classes. However, in certain applications such as Network Intrusion Detection Systems, it is challenging to obtain data samples for all attack classes that the m… ▽ More The standard ML methodology assumes that the test samples are derived from a set of pre-observed classes used in the training phase. Where the model extracts and learns useful patterns to detect new data samples belonging to the same data classes. However, in certain applications such as Network Intrusion Detection Systems, it is challenging to obtain data samples for all attack classes that the model will most likely observe in production. ML-based NIDSs face new attack traffic known as zero-day attacks, that are not used in the training of the learning models due to their non-existence at the time. In this paper, a zero-shot learning methodology has been proposed to evaluate the ML model performance in the detection of zero-day attack scenarios. In the attribute learning stage, the ML models map the network data features to distinguish semantic attributes from known attack (seen) classes. In the inference stage, the models are evaluated in the detection of zero-day attack (unseen) classes by constructing the relationships between known attacks and zero-day attacks. A new metric is defined as Zero-day Detection Rate, which measures the effectiveness of the learning model in the inference stage. The results demonstrate that while the majority of the attack classes do not represent significant risks to organisations adopting an ML-based NIDS in a zero-day attack scenario. However, for certain attack groups identified in this paper, such systems are not effective in applying the learnt attributes of attack behaviour to detect them as malicious. Further Analysis was conducted using the Wasserstein Distance technique to measure how different such attacks are from other attack types used in the training of the ML model. The results demonstrate that sophisticated attacks with a low zero-day detection rate have a significantly distinct feature distribution compared to the other attack classes. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Feature Extraction for Machine Learning-based Intrusion Detection in IoT Networks

Authors: Mohanad Sarhan, Siamak Layeghy, Nour Moustafa, Marcus Gallagher, Marius Portmann

Abstract: A large number of network security breaches in IoT networks have demonstrated the unreliability of current Network Intrusion Detection Systems (NIDSs). Consequently, network interruptions and loss of sensitive data have occurred, which led to an active research area for improving NIDS technologies. In an analysis of related works, it was observed that most researchers aim to obtain better classifi… ▽ More A large number of network security breaches in IoT networks have demonstrated the unreliability of current Network Intrusion Detection Systems (NIDSs). Consequently, network interruptions and loss of sensitive data have occurred, which led to an active research area for improving NIDS technologies. In an analysis of related works, it was observed that most researchers aim to obtain better classification results by using a set of untried combinations of Feature Reduction (FR) and Machine Learning (ML) techniques on NIDS datasets. However, these datasets are different in feature sets, attack types, and network design. Therefore, this paper aims to discover whether these techniques can be generalised across various datasets. Six ML models are utilised: a Deep Feed Forward (DFF), Convolutional Neural Network (CNN), Recurrent Neural Network (RNN), Decision Tree (DT), Logistic Regression (LR), and Naive Bayes (NB). The accuracy of three Feature Extraction (FE) algorithms; Principal Component Analysis (PCA), Auto-encoder (AE), and Linear Discriminant Analysis (LDA), are evaluated using three benchmark datasets: UNSW-NB15, ToN-IoT and CSE-CIC-IDS2018. Although PCA and AE algorithms have been widely used, the determination of their optimal number of extracted dimensions has been overlooked. The results indicate that no clear FE method or ML model can achieve the best scores for all datasets. The optimal number of extracted dimensions has been identified for each dataset, and LDA degrades the performance of the ML models on two datasets. The variance is used to analyse the extracted dimensions of LDA and PCA. Finally, this paper concludes that the choice of datasets significantly alters the performance of the applied techniques. We believe that a universal (benchmark) feature set is needed to facilitate further advancement and progress of research in this field. △ Less

Submitted 5 December, 2022; v1 submitted 28 August, 2021; originally announced August 2021.

Examining average and discounted reward optimality criteria in reinforcement learning

Authors: Vektor Dewanto, Marcus Gallagher

Abstract: In reinforcement learning (RL), the goal is to obtain an optimal policy, for which the optimality criterion is fundamentally important. Two major optimality criteria are average and discounted rewards. While the latter is more popular, it is problematic to apply in environments without an inherent notion of discounting. This motivates us to revisit a) the progression of optimality criteria in dyna… ▽ More In reinforcement learning (RL), the goal is to obtain an optimal policy, for which the optimality criterion is fundamentally important. Two major optimality criteria are average and discounted rewards. While the latter is more popular, it is problematic to apply in environments without an inherent notion of discounting. This motivates us to revisit a) the progression of optimality criteria in dynamic programming, b) justification for and complication of an artificial discount factor, and c) benefits of directly maximizing the average reward criterion, which is discounting-free. Our contributions include a thorough examination of the relationship between average and discounted rewards, as well as a discussion of their pros and cons in RL. We emphasize that average-reward RL methods possess the ingredient and mechanism for applying a family of discounting-free optimality criteria (Veinott, 1969) to RL. △ Less

Submitted 1 September, 2022; v1 submitted 3 July, 2021; originally announced July 2021.

Comments: 23 pages, restructuring, adding more details

A nearly Blackwell-optimal policy gradient method

Authors: Vektor Dewanto, Marcus Gallagher

Abstract: For continuing environments, reinforcement learning (RL) methods commonly maximize the discounted reward criterion with discount factor close to 1 in order to approximate the average reward (the gain). However, such a criterion only considers the long-run steady-state performance, ignoring the transient behaviour in transient states. In this work, we develop a policy gradient method that optimizes… ▽ More For continuing environments, reinforcement learning (RL) methods commonly maximize the discounted reward criterion with discount factor close to 1 in order to approximate the average reward (the gain). However, such a criterion only considers the long-run steady-state performance, ignoring the transient behaviour in transient states. In this work, we develop a policy gradient method that optimizes the gain, then the bias (which indicates the transient performance and is important to capably select from policies with equal gain). We derive expressions that enable sampling for the gradient of the bias and its preconditioning Fisher matrix. We further devise an algorithm that solves the gain-then-bias (bi-level) optimization. Its key ingredient is an RL-specific logarithmic barrier function. Experimental results provide insights into the fundamental mechanisms of our proposal. △ Less

Submitted 3 July, 2022; v1 submitted 28 May, 2021; originally announced May 2021.

Comments: 30 pages, major re-structuring

Benchmarking the Benchmark -- Analysis of Synthetic NIDS Datasets

Authors: Siamak Layeghy, Marcus Gallagher, Marius Portmann

Abstract: Network Intrusion Detection Systems (NIDSs) are an increasingly important tool for the prevention and mitigation of cyber attacks. A number of labelled synthetic datasets generated have been generated and made publicly available by researchers, and they have become the benchmarks via which new ML-based NIDS classifiers are being evaluated. Recently published results show excellent classification p… ▽ More Network Intrusion Detection Systems (NIDSs) are an increasingly important tool for the prevention and mitigation of cyber attacks. A number of labelled synthetic datasets generated have been generated and made publicly available by researchers, and they have become the benchmarks via which new ML-based NIDS classifiers are being evaluated. Recently published results show excellent classification performance with these datasets, increasingly approaching 100 percent performance across key evaluation metrics such as accuracy, F1 score, etc. Unfortunately, we have not yet seen these excellent academic research results translated into practical NIDS systems with such near-perfect performance. This motivated our research presented in this paper, where we analyse the statistical properties of the benign traffic in three of the more recent and relevant NIDS datasets, (CIC, UNSW, ...). As a comparison, we consider two datasets obtained from real-world production networks, one from a university network and one from a medium size Internet Service Provider (ISP). Our results show that the two real-world datasets are quite similar among themselves in regards to most of the considered statistical features. Equally, the three synthetic datasets are also relatively similar within their group. However, and most importantly, our results show a distinct difference of most of the considered statistical features between the three synthetic datasets and the two real-world datasets. Since ML relies on the basic assumption of training and test datasets being sampled from the same distribution, this raises the question of how well the performance results of ML-classifiers trained on the considered synthetic datasets can translate and generalise to real-world networks. We believe this is an interesting and relevant question which provides motivation for further research in this space. △ Less

Submitted 18 April, 2021; originally announced April 2021.

Comments: 25 pages, 13 figures

E-GraphSAGE: A Graph Neural Network based Intrusion Detection System for IoT

Authors: Wai Weng Lo, Siamak Layeghy, Mohanad Sarhan, Marcus Gallagher, Marius Portmann

Abstract: This paper presents a new Network Intrusion Detection System (NIDS) based on Graph Neural Networks (GNNs). GNNs are a relatively new sub-field of deep neural networks, which can leverage the inherent structure of graph-based data. Training and evaluation data for NIDSs are typically represented as flow records, which can naturally be represented in a graph format. In this paper, we propose E-Graph… ▽ More This paper presents a new Network Intrusion Detection System (NIDS) based on Graph Neural Networks (GNNs). GNNs are a relatively new sub-field of deep neural networks, which can leverage the inherent structure of graph-based data. Training and evaluation data for NIDSs are typically represented as flow records, which can naturally be represented in a graph format. In this paper, we propose E-GraphSAGE, a GNN approach that allows capturing both the edge features of a graph as well as the topological information for network intrusion detection in IoT networks. To the best of our knowledge, our proposal is the first successful, practical, and extensively evaluated approach of applying GNNs on the problem of network intrusion detection for IoT using flow-based data. Our extensive experimental evaluation on four recent NIDS benchmark datasets shows that our approach outperforms the state-of-the-art in terms of key classification metrics, which demonstrates the potential of GNNs in network intrusion detection, and provides motivation for further research. △ Less

Submitted 10 January, 2022; v1 submitted 30 March, 2021; originally announced March 2021.

Comments: will appear in IEEE/IFIP Network Operations and Management Symposium 2022

The art of coarse Stokes: Richardson extrapolation improves the accuracy and efficiency of the method of regularized stokeslets

Authors: Meurig Gallagher, David Smith

Abstract: The method of regularised stokeslets is widely used in microscale biological fluid dynamics due to its ease of implementation, natural treatment of complex moving geometries, and removal of singular functions to integrate. The standard implementation of the method is subject to high computational cost due to the coupling of the linear system size to the numerical resolution required to resolve the… ▽ More The method of regularised stokeslets is widely used in microscale biological fluid dynamics due to its ease of implementation, natural treatment of complex moving geometries, and removal of singular functions to integrate. The standard implementation of the method is subject to high computational cost due to the coupling of the linear system size to the numerical resolution required to resolve the rapidly-varying regularised stokeslet kernel. Here we show how Richardson extrapolation with coarse values of the regularisation parameter is ideally-suited to reduce the quadrature error, hence dramatically reducing the storage and solution costs without loss of accuracy. Numerical experiments on the resistance and mobility problems in Stokes flow support the analysis, confirming several orders of magnitude improvement in accuracy and/or efficiency. △ Less

Submitted 9 March, 2021; v1 submitted 22 January, 2021; originally announced January 2021.

Comments: 22 pages, 4 figures

Feature Fusion of Raman Chemical Imaging and Digital Histopathology using Machine Learning for Prostate Cancer Detection

Authors: Trevor Doherty, Susan McKeever, Nebras Al-Attar, Tiarnan Murphy, Claudia Aura, Arman Rahman, Amanda O'Neill, Stephen P Finn, Elaine Kay, William M. Gallagher, R. William G. Watson, Aoife Gowen, Patrick Jackman

Abstract: The diagnosis of prostate cancer is challenging due to the heterogeneity of its presentations, leading to the over diagnosis and treatment of non-clinically important disease. Accurate diagnosis can directly benefit a patient's quality of life and prognosis. Towards addressing this issue, we present a learning model for the automatic identification of prostate cancer. While many prostate cancer st… ▽ More The diagnosis of prostate cancer is challenging due to the heterogeneity of its presentations, leading to the over diagnosis and treatment of non-clinically important disease. Accurate diagnosis can directly benefit a patient's quality of life and prognosis. Towards addressing this issue, we present a learning model for the automatic identification of prostate cancer. While many prostate cancer studies have adopted Raman spectroscopy approaches, none have utilised the combination of Raman Chemical Imaging (RCI) and other imaging modalities. This study uses multimodal images formed from stained Digital Histopathology (DP) and unstained RCI. The approach was developed and tested on a set of 178 clinical samples from 32 patients, containing a range of non-cancerous, Gleason grade 3 (G3) and grade 4 (G4) tissue microarray samples. For each histological sample, there is a pathologist labelled DP - RCI image pair. The hypothesis tested was whether multimodal image models can outperform single modality baseline models in terms of diagnostic accuracy. Binary non-cancer/cancer models and the more challenging G3/G4 differentiation were investigated. Regarding G3/G4 classification, the multimodal approach achieved a sensitivity of 73.8% and specificity of 88.1% while the baseline DP model showed a sensitivity and specificity of 54.1% and 84.7% respectively. The multimodal approach demonstrated a statistically significant 12.7% AUC advantage over the baseline with a value of 85.8% compared to 73.1%, also outperforming models based solely on RCI and median Raman spectra. Feature fusion of DP and RCI does not improve the more trivial task of tumour identification but does deliver an observed advantage in G3/G4 discrimination. Building on these promising findings, future work could include the acquisition of larger datasets for enhanced model generalization. △ Less

Submitted 18 January, 2021; originally announced January 2021.

Comments: 19 pages, 8 tables, 18 figures

Average-reward model-free reinforcement learning: a systematic review and literature map**

Authors: Vektor Dewanto, George Dunn, Ali Eshragh, Marcus Gallagher, Fred Roosta

Abstract: Reinforcement learning is important part of artificial intelligence. In this paper, we review model-free reinforcement learning that utilizes the average reward optimality criterion in the infinite horizon setting. Motivated by the solo survey by Mahadevan (1996a), we provide an updated review of work in this area and extend it to cover policy-iteration and function approximation methods (in addit… ▽ More Reinforcement learning is important part of artificial intelligence. In this paper, we review model-free reinforcement learning that utilizes the average reward optimality criterion in the infinite horizon setting. Motivated by the solo survey by Mahadevan (1996a), we provide an updated review of work in this area and extend it to cover policy-iteration and function approximation methods (in addition to the value-iteration and tabular counterparts). We present a comprehensive literature map**. We also identify and discuss opportunities for future work. △ Less

Submitted 3 August, 2021; v1 submitted 18 October, 2020; originally announced October 2020.

Comments: 36 pages, refined prelim and politer sections

Optimality-based Analysis of XCSF Compaction in Discrete Reinforcement Learning

Authors: Jordan T. Bishop, Marcus Gallagher

Abstract: Learning classifier systems (LCSs) are population-based predictive systems that were originally envisioned as agents to act in reinforcement learning (RL) environments. These systems can suffer from population bloat and so are amenable to compaction techniques that try to strike a balance between population size and performance. A well-studied LCS architecture is XCSF, which in the RL setting acts… ▽ More Learning classifier systems (LCSs) are population-based predictive systems that were originally envisioned as agents to act in reinforcement learning (RL) environments. These systems can suffer from population bloat and so are amenable to compaction techniques that try to strike a balance between population size and performance. A well-studied LCS architecture is XCSF, which in the RL setting acts as a Q-function approximator. We apply XCSF to a deterministic and stochastic variant of the FrozenLake8x8 environment from OpenAI Gym, with its performance compared in terms of function approximation error and policy accuracy to the optimal Q-functions and policies produced by solving the environments via dynamic programming. We then introduce a novel compaction algorithm (Greedy Niche Mass Compaction - GNMC) and study its operation on XCSF's trained populations. Results show that given a suitable parametrisation, GNMC preserves or even slightly improves function approximation error while yielding a significant reduction in population size. Reasonable preservation of policy accuracy also occurs, and we link this metric to the commonly used steps-to-goal metric in maze-like environments, illustrating how the metrics are complementary rather than competitive. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Detection of the diffuse HI emission in the Circumgalactic Medium of NGC 891 and NGC 4565

Authors: Sanskriti Das, Amy Sardone, Adam K. Leroy, Smita Mathur, Molly Gallagher, Nickolas M. **el, D. J. Pisano, George Heald

Abstract: We present detections of 21-cm emission from neutral hydrogen (HI) in the circumgalactic medium (CGM) of the local edge-on galaxies NGC 891 and NGC 4565 using the Robert C. Byrd Green Bank Telescope (GBT). With our 5$σ$ sensitivity of $8.2 \times 10^{16}$ cm$^{-2}$ calculated over a 20 km s$^{-1}$ channel, we achieve $>5σ$ detections out to $90-120$ kpc along the minor axes. The velocity width of… ▽ More We present detections of 21-cm emission from neutral hydrogen (HI) in the circumgalactic medium (CGM) of the local edge-on galaxies NGC 891 and NGC 4565 using the Robert C. Byrd Green Bank Telescope (GBT). With our 5$σ$ sensitivity of $8.2 \times 10^{16}$ cm$^{-2}$ calculated over a 20 km s$^{-1}$ channel, we achieve $>5σ$ detections out to $90-120$ kpc along the minor axes. The velocity width of the CGM emission is as large as that of the disk $\approx 500$ km s$^{-1}$, indicating the existence of a diffuse component permeating the halo. We compare our GBT measurements with interferometric data from the Westerbork Synthesis Radio Telescope (WSRT). The WSRT maps the HI emission from the disk at high S/N but has limited surface brightness sensitivity at the angular scales probed with the GBT. After convolving the WSRT data to the spatial resolution of the GBT (FWHM = 9.1$'$), we find that the emission detected by the WSRT accounts for $48^{+15}_{-25}$% ($58^{+4}_{-18}$%) of the total flux recovered by the GBT from the CGM of NGC 891(NGC 4565). The existence of significant GBT-only flux suggests the presence of a large amount of diffuse, low column density HI emission in the CGM. For reasonable assumptions, the extended diffuse HI could account for $5.2\pm0.9$% and $2.0\pm0.8$% of the total HI emission of NGC 891 and NGC 4565. △ Less

Submitted 22 July, 2020; v1 submitted 27 May, 2020; originally announced May 2020.

Comments: 14 pages, 5 figures, published in ApJ

Journal ref: ApJ 898, 15 (2020)

Overcoming the challenges in controlled thermal deposition of organic diradicals

Authors: Tobias Junghoefer, Nolan M. Gallagher, Kubandiran Kolanji, Erika Giangrisostomi, Ruslan Ovsyannikov, Thomas Chassé, Martin Baumgarten, Andrzej Rajca, Arrigo Calzolari, Maria Benedetta Casu

Abstract: We have demonstrated that it is possible to evaporate diradicals in a controlled environment obtaining thin films in which the diradical character is preserved. However, evaporation represents a challenge. The presence of two radical sites makes the molecules more reactive, even in case of very stable single radicals. We have explored the parameters that play a role in this phenomenon. Bulk format… ▽ More We have demonstrated that it is possible to evaporate diradicals in a controlled environment obtaining thin films in which the diradical character is preserved. However, evaporation represents a challenge. The presence of two radical sites makes the molecules more reactive, even in case of very stable single radicals. We have explored the parameters that play a role in this phenomenon. Bulk formation thermodynamics and delocalisation of the unpaired electrons play the major role. The higher the formation energies of the crystal, the more difficult is the evaporation of intact radicals. The larger the delocalization, the more stable is the film exposed to air. The evaporation of different radicals, also with a larger number of radical sites can be successfully addressed considering our findings. △ Less

Submitted 26 May, 2020; v1 submitted 11 May, 2020; originally announced May 2020.

Avoiding Kernel Fixed Points: Computing with ELU and GELU Infinite Networks

Authors: Russell Tsuchida, Tim Pearce, Chris van der Heide, Fred Roosta, Marcus Gallagher

Abstract: Analysing and computing with Gaussian processes arising from infinitely wide neural networks has recently seen a resurgence in popularity. Despite this, many explicit covariance functions of networks with activation functions used in modern networks remain unknown. Furthermore, while the kernels of deep networks can be computed iteratively, theoretical understanding of deep kernels is lacking, par… ▽ More Analysing and computing with Gaussian processes arising from infinitely wide neural networks has recently seen a resurgence in popularity. Despite this, many explicit covariance functions of networks with activation functions used in modern networks remain unknown. Furthermore, while the kernels of deep networks can be computed iteratively, theoretical understanding of deep kernels is lacking, particularly with respect to fixed-point dynamics. Firstly, we derive the covariance functions of multi-layer perceptrons (MLPs) with exponential linear units (ELU) and Gaussian error linear units (GELU) and evaluate the performance of the limiting Gaussian processes on some benchmarks. Secondly, and more generally, we analyse the fixed-point dynamics of iterated kernels corresponding to a broad range of activation functions. We find that unlike some previously studied neural network kernels, these new kernels exhibit non-trivial fixed-point dynamics which are mirrored in finite-width neural networks. The fixed point behaviour present in some networks explains a mechanism for implicit regularisation in overparameterised deep models. Our results relate to both the static iid parameter conjugate kernel and the dynamic neural tangent kernel constructions. Software at github.com/RussellTsuchida/ELU_GELU_kernels. △ Less

Submitted 28 February, 2021; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: AAAI camera ready version. 18 pages, 9 figures, 2 tables. Corrected name particle capitalisation and formatting

Passively parallel regularized stokeslets

Authors: Meurig T. Gallagher, David J. Smith

Abstract: Stokes flow, discussed by G.G. Stokes in 1851, describes many microscopic biological flow phenomena, including cilia-driven transport and flagellar motility; the need to quantify and understand these flows has motivated decades of mathematical and computational research. Regularized stokeslet methods, which have been used and refined over the past twenty years, offer significant advantages in simp… ▽ More Stokes flow, discussed by G.G. Stokes in 1851, describes many microscopic biological flow phenomena, including cilia-driven transport and flagellar motility; the need to quantify and understand these flows has motivated decades of mathematical and computational research. Regularized stokeslet methods, which have been used and refined over the past twenty years, offer significant advantages in simplicity of implementation, with a recent modification based on nearest-neighbour interpolation providing significant improvements in efficiency and accuracy. Moreover this method can be implemented with the majority of the computation taking place through built-in linear algebra, entailing that state-of-the-art hardware and software developments in the latter, in particular multicore and GPU computing, can be exploited through minimal modifications ('passive parallelism') to existing MATLAB computer code. Hence, and with widely-available GPU hardware, significant improvements in the efficiency of the regularized stokeslet method can be obtained. The approach is demonstrated through computational experiments on three model biological flows: undulatory propulsion of multiple C. Elegans, simulation of progression and transport by multiple sperm in a geometrically confined region, and left-right symmetry breaking particle transport in the ventral node of the mouse embryo. In general an order-of-magnitude improvement in efficiency is observed. This development further widens the complexity of biological flow systems that are accessible without the need for extensive code development or specialist facilities. △ Less

Submitted 31 March, 2020; v1 submitted 17 January, 2020; originally announced January 2020.

Comments: 21 pages, 7 figures, submitted

MSC Class: 76Z10; 76D07; 65Y05; 92C05

Gauge dependence of the gauge boson projector

Authors: E. M. Priidik Gallagher, Stefan Groote, Maria Naeem

Abstract: The propagator of a gauge boson, like the massless photon or the massive vector bosons $W^\pm$ and $Z$ of the electroweak theory, can be derived in two different ways, namely via Green's functions (semi-classical approach) or via the vacuum expectation value of the time-ordered product of the field operators (field theoretical approach). Comparing the semi-classical with the field theoretical appr… ▽ More The propagator of a gauge boson, like the massless photon or the massive vector bosons $W^\pm$ and $Z$ of the electroweak theory, can be derived in two different ways, namely via Green's functions (semi-classical approach) or via the vacuum expectation value of the time-ordered product of the field operators (field theoretical approach). Comparing the semi-classical with the field theoretical approach, the central tensorial object can be defined as the gauge boson projector, directly related to the completeness relation for the complete set of polarisation four-vectors. In this paper we explain the relation for this projector to different cases of the $R_ξ$ gauge and explain why the unitary gauge is the default gauge for massive gauge bosons. △ Less

Submitted 28 July, 2020; v1 submitted 13 January, 2020; originally announced January 2020.

Comments: 26 pages, 3 figures, published version

Journal ref: Particles 3(3) (2020) 543-561

Parker Solar Probe Observations of a Dust Trail in the Orbit of (3200) Phaethon

Authors: Karl Battams, Matthew M. Knight, Michael S. P. Kelley, Brendan M. Gallagher, Russell A. Howard, Guillermo Stenborg

Abstract: We present the identification and preliminary analysis of a dust trail following the orbit of (3200) Phaethon as seen in white light images recorded by the Wide-field Imager for Parker Solar Probe (WISPR) instrument on the NASA Parker Solar Probe (PSP) mission. During PSP's first solar encounter in November 2018, a dust trail following Phaethon's orbit was visible for several days and crossing two… ▽ More We present the identification and preliminary analysis of a dust trail following the orbit of (3200) Phaethon as seen in white light images recorded by the Wide-field Imager for Parker Solar Probe (WISPR) instrument on the NASA Parker Solar Probe (PSP) mission. During PSP's first solar encounter in November 2018, a dust trail following Phaethon's orbit was visible for several days and crossing two fields of view. Preliminary analyses indicate this trail to have a visual magnitude of 15.8 $\pm$0.3 per pixel and a surface brightness of 25.0 mag arcsec$^{-2}$ as seen by PSP/WISPR from a distance of $\sim$0.2 au from the trail. We estimate the total mass of the stream to be $\sim(0.4-1.3){\times}10^{12}$ kg, which is consistent with, though slightly underestimates, the assumed mass of the Geminid stream but is far larger than the current dust production of Phaethon could support. Our results imply that we are observing a natural clustering of at least some portion of the Geminid meteor stream through its perihelion, as opposed to dust produced more recently from perihelion activity of Phaethon. △ Less

Submitted 5 January, 2020; v1 submitted 18 December, 2019; originally announced December 2019.

Comments: 14 Pages, 7 Figures; Accepted to ApJS (Parker Solar Probe Special Edition)

Richer priors for infinitely wide multi-layer perceptrons

Authors: Russell Tsuchida, Fred Roosta, Marcus Gallagher

Abstract: It is well-known that the distribution over functions induced through a zero-mean iid prior distribution over the parameters of a multi-layer perceptron (MLP) converges to a Gaussian process (GP), under mild conditions. We extend this result firstly to independent priors with general zero or non-zero means, and secondly to a family of partially exchangeable priors which generalise iid priors. We d… ▽ More It is well-known that the distribution over functions induced through a zero-mean iid prior distribution over the parameters of a multi-layer perceptron (MLP) converges to a Gaussian process (GP), under mild conditions. We extend this result firstly to independent priors with general zero or non-zero means, and secondly to a family of partially exchangeable priors which generalise iid priors. We discuss how the second prior arises naturally when considering an equivalence class of functions in an MLP and through training processes such as stochastic gradient descent. The model resulting from partially exchangeable priors is a GP, with an additional level of inference in the sense that the prior and posterior predictive distributions require marginalisation over hyperparameters. We derive the kernels of the limiting GP in deep MLPs, and show empirically that these kernels avoid certain pathologies present in previously studied priors. We empirically evaluate our claims of convergence by measuring the maximum mean discrepancy between finite width models and limiting models. We compare the performance of our new limiting model to some previously discussed models on synthetic regression problems. We observe increasing ill-conditioning of the marginal likelihood and hyper-posterior as the depth of the model increases, drawing parallels with finite width networks which require notoriously involved optimisation tricks. △ Less

Submitted 28 November, 2019; originally announced November 2019.

Comments: Pre-print

Magnetic ordering in metal-free radical thin films

Authors: Tobias Junghoefer, Ivan Baev, Mathias Glaser, Francesca Ciccullo, Erika Giangrisostomi, Ruslan Ovsyannikov, Fridtjof Kielgast, Matz Nissen, Julius Schwarz, Nolan M. Gallagher, Andrzej Rajca, Michael Martins, Arrigo Calzolari, Maria Benedetta Casu

Abstract: Molecular systems are materials that intersect with many different promising fields such as organic/molecular electronics and spintronics, organic magnetism and quantum computing1-7. Particularly, magnetism in organic materials is very intriguing: the possibility to realize long-range magnetic order in completely metal-free systems means that magnetic moments are coupled to useful properties of or… ▽ More Molecular systems are materials that intersect with many different promising fields such as organic/molecular electronics and spintronics, organic magnetism and quantum computing1-7. Particularly, magnetism in organic materials is very intriguing: the possibility to realize long-range magnetic order in completely metal-free systems means that magnetic moments are coupled to useful properties of organic materials, such as optical transparency, low-cost fabrication, and flexible chemical design. Magnetic ordering in light elements, such as nitrogen and carbon, has been studied in magnetic-edged graphene nanoribbons8 and bilayers9, and polymers10 while in organic thin films most of the investigations show this effect as due to the proximity of light atoms to heavy metals, impurities, or vacancies11. Purely organic radicals are molecules that carry one unpaired electron giving rise to a permanent magnetic moment, in the complete absence of metal ions.12-14 Inspired by their tremendous potential, here we investigate thin films of an exceptionally chemically stable Blatter radical derivative15 by using X-ray magnetic circular dichroism (XMCD)16-18. Here we observe XMCD at the nitrogen K-edge. Our results show a magnetic ordering different than in the single crystals and calculations indicate, although weak, a long-range intermolecular coupling. We anticipate our work to be a starting point for investigating and modelling magnetic behaviour in purely organic thin films. The tuning of the magnetic properties by the molecular arrangement in organic films is an exciting perspective towards revealing new properties and applications. △ Less

Submitted 5 May, 2021; v1 submitted 5 November, 2019; originally announced November 2019.

A z=0 Multi-wavelength Galaxy Synthesis I: A WISE and GALEX Atlas of Local Galaxies

Authors: Adam K. Leroy, Karin M. Sandstrom, Dustin Lang, Alexia Lewis, Samir Salim, Erica A. Behrens, Jérémy Chastenet, I-Da Chiang, Molly J. Gallagher, Sarah Kessler, Dyas Utomo

Abstract: We present an atlas of ultraviolet and infrared images of ~15,750 local (d < 50 Mpc) galaxies, as observed by NASA's WISE and GALEX missions. These maps have matched resolution (FWHM 7.5'' and 15''), matched astrometry, and a common procedure for background removal. We demonstrate that they agree well with resolved intensity measurements and integrated photometry from previous surveys. This atlas… ▽ More We present an atlas of ultraviolet and infrared images of ~15,750 local (d < 50 Mpc) galaxies, as observed by NASA's WISE and GALEX missions. These maps have matched resolution (FWHM 7.5'' and 15''), matched astrometry, and a common procedure for background removal. We demonstrate that they agree well with resolved intensity measurements and integrated photometry from previous surveys. This atlas represents the first part of a program (the z=0 Multi-wavelength Galaxy Synthesis) to create a large, uniform database of resolved measurements of gas and dust in nearby galaxies. The images and associated catalogs are publicly available at the NASA/IPAC Infrared Science Archive. This atlas allows us estimate local and integrated star formation rates (SFRs) and stellar masses (M$_\star$) across the local galaxy population in a uniform way. In the appendix, we use the population synthesis fits of Salim et al. (2016, 2018) to calibrate integrated M$_\star$ and SFR estimators based on GALEX and WISE. Because they leverage an SDSS-base training set of >100,000 galaxies, these calibrations have high precision and allow us to rigorously compare local galaxies to Sloan Digital Sky Survey results. We provide these SFR and M$_\star$ estimates for all galaxies in our sample and show that our results yield a "main sequence" of star forming galaxies comparable to previous work. We also show the distribution of intensities from resolved galaxies in NUV-to-WISE1 vs. WISE1-to-WISE3 space, which captures much of the key physics accessed by these bands. △ Less

Submitted 29 October, 2019; originally announced October 2019.

Comments: 46 pages, 27 figures, published in ApJS (https://ui.adsabs.harvard.edu/abs/2019ApJS..244...24L/abstract ). See that version for full resolution figures and machine readable tables. Go download data for your favorite nearby galaxy here: https://irsa.ipac.caltech.edu/data/WISE/z0MGS/overview.html . The appendix presents detailed analysis of translations to physical quantities

Journal ref: The Astrophysical Journal Supplement Series, 244:24 (39pp), 2019 October

Simulations of particle tracking in the oligociliated mouse node and implications for left-right symmetry breaking mechanics

Authors: Meurig T. Gallagher, Thomas D. Montenegro-Johnson, David J. Smith

Abstract: The concept of internal anatomical asymmetry is familiar; usually in humans the heart is on the left and the liver is on the right, however how does the develo** embryo know to produce this consistent laterality? Symmetry breaking initiates with left-right asymmetric cilia-driven fluid mechanics in a small fluid-filled structure called the ventral node in mice. However the question of what conve… ▽ More The concept of internal anatomical asymmetry is familiar; usually in humans the heart is on the left and the liver is on the right, however how does the develo** embryo know to produce this consistent laterality? Symmetry breaking initiates with left-right asymmetric cilia-driven fluid mechanics in a small fluid-filled structure called the ventral node in mice. However the question of what converts this flow into left-right asymmetric development remains unanswered. A leading hypotheses is that flow transports morphogen containing vesicles within the node, the absorption of which results in asymmetrical gene expression. To investigate how vesicle transport might result in the situs patterns observed in wildtype and mutant experiments, we extend the open source Stokes flow package, NEAREST, to consider the hydrodynamic and Brownian motion of particles in a mouse model with flow driven by one, two, and 112 beating cilia. Three models for morphogen-containing particle released are simulated to assess their compatibility with observed results in oligociliated and wildtype mouse embryos: uniformly random release, localised cilium stress induced release, and localised release from motile cilia themselves. Only the uniformly random release model appears consistent with the data, with neither localised-release model resulting in significant transport in the oligociliated embryo. △ Less

Submitted 30 September, 2019; originally announced October 2019.

Comments: 11 pages, 4 figures

Doing more with less: the flagellar end piece enhances the propulsive effectiveness of human spermatozoa

Authors: Cara V. Neal, Atticus L. Hall-McNair, Jackson Kirkman-Brown, David J. Smith, Meurig T. Gallagher

Abstract: Spermatozoa self-propel by propagating bending waves along a predominantly active elastic flagellum. The organized structure of the "9 + 2" axoneme is lost in the most-distal few microns of the flagellum, and therefore this region is unlikely to have the ability to generate active bending; as such it has been largely neglected in biophysical studies. Through elastohydrodynamic modeling of human-li… ▽ More Spermatozoa self-propel by propagating bending waves along a predominantly active elastic flagellum. The organized structure of the "9 + 2" axoneme is lost in the most-distal few microns of the flagellum, and therefore this region is unlikely to have the ability to generate active bending; as such it has been largely neglected in biophysical studies. Through elastohydrodynamic modeling of human-like sperm we show that an inactive distal region confers significant advantages, both in propulsive thrust and swimming efficiency, when compared with a fully active flagellum of the same total length. The beneficial effect of the inactive end piece on these statistics can be as small as a few percent but can be above 430%. The optimal inactive length, between 2-18% of the total length, depends on both wavenumber and viscous-elastic ratio, and therefore is likely to vary in different species. Potential implications in evolutionary biology and clinical assessment are discussed. △ Less

Submitted 5 June, 2020; v1 submitted 3 October, 2019; originally announced October 2019.

Comments: To Appear, Physical Review Fluids. 25 pages, 14 figures

MSC Class: 76D07; 74F10; 45B05; 65R20; 65Z05; 92C17

Journal ref: Phys. Rev. Fluids 5, 073101 (2020)

EMPIRE: The IRAM 30-m Dense Gas Survey of Nearby Galaxies

Authors: María J. Jiménez-Donaire, F. Bigiel, A. K. Leroy, A. Usero, D. Cormier, J. Puschnig, M. Gallagher, A. Kepley, A. D. Bolatto, S. García-Burillo, A. Hughes, C. Kramer, J. Pety, E. Schinnerer, A. Schruba, K. Schuster, F. Walter

Abstract: We present EMPIRE, an IRAM 30-m large program that mapped $λ= 3{-}4$ mm dense gas tracers at $\sim 1{-}2\,$kpc resolution across the whole star-forming disk of nine nearby, massive, spiral galaxies. We describe the EMPIRE observing and reduction strategies and show new whole-galaxy maps of HCN(1-0), HCO$^+$(1-0), HNC(1-0) and CO(1-0). We explore how the HCN-to-CO and IR-to-HCN ratios, observationa… ▽ More We present EMPIRE, an IRAM 30-m large program that mapped $λ= 3{-}4$ mm dense gas tracers at $\sim 1{-}2\,$kpc resolution across the whole star-forming disk of nine nearby, massive, spiral galaxies. We describe the EMPIRE observing and reduction strategies and show new whole-galaxy maps of HCN(1-0), HCO$^+$(1-0), HNC(1-0) and CO(1-0). We explore how the HCN-to-CO and IR-to-HCN ratios, observational proxies for the dense gas fraction and dense gas star formation efficiency, depend on host galaxy and local environment. We find that the fraction of dense gas correlates with stellar surface density, gas surface density, molecular-to-atomic gas ratio, and dynamical equilibrium pressure. In EMPIRE, the star formation rate per unit dense gas anti-correlates with these same environmental parameters. Thus, although dense gas appears abundant the central regions of many spiral galaxies, this gas appears relatively inefficient at forming stars. These results qualitatively agree with previous work on nearby galaxies and the Milky Way's Central Molecular Zone. To first order, EMPIRE demonstrates that the conditions in a galaxy disk set the gas density distribution and that the dense gas traced by HCN shows an environment-dependent relation to star formation. However, our results also show significant ($\pm 0.2$ dex) galaxy-to-galaxy variations. We suggest that gas structure below the scale of our observations and dynamical effects likely also play an important role. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Comments: Accepted for publication in ApJ

Benchmarking Deep Learning Architectures for Predicting Readmission to the ICU and Describing Patients-at-Risk

Authors: Sebastiano Barbieri, James Kemp, Oscar Perez-Concha, Sradha Kotwal, Martin Gallagher, Angus Ritchie, Louisa Jorm

Abstract: Objective: To compare different deep learning architectures for predicting the risk of readmission within 30 days of discharge from the intensive care unit (ICU). The interpretability of attention-based models is leveraged to describe patients-at-risk. Methods: Several deep learning architectures making use of attention mechanisms, recurrent layers, neural ordinary differential equations (ODEs), a… ▽ More Objective: To compare different deep learning architectures for predicting the risk of readmission within 30 days of discharge from the intensive care unit (ICU). The interpretability of attention-based models is leveraged to describe patients-at-risk. Methods: Several deep learning architectures making use of attention mechanisms, recurrent layers, neural ordinary differential equations (ODEs), and medical concept embeddings with time-aware attention were trained using publicly available electronic medical record data (MIMIC-III) associated with 45,298 ICU stays for 33,150 patients. Bayesian inference was used to compute the posterior over weights of an attention-based model. Odds ratios associated with an increased risk of readmission were computed for static variables. Diagnoses, procedures, medications, and vital signs were ranked according to the associated risk of readmission. Results: A recurrent neural network, with time dynamics of code embeddings computed by neural ODEs, achieved the highest average precision of 0.331 (AUROC: 0.739, F1-Score: 0.372). Predictive accuracy was comparable across neural network architectures. Groups of patients at risk included those suffering from infectious complications, with chronic or progressive conditions, and for whom standard medical care was not suitable. Conclusions: Attention-based networks may be preferable to recurrent networks if an interpretable model is required, at only marginal cost in predictive accuracy. △ Less

Submitted 6 January, 2020; v1 submitted 21 May, 2019; originally announced May 2019.

Efficient Implementation of Elastohydrodynamics via Integral Operators

Authors: Atticus L. Hall-McNair, Thomas D. Montenegro-Johnson, Hermes Gadelha, David J. Smith, Meurig T. Gallagher

Abstract: The dynamics of geometrically non-linear flexible filaments play an important role in a host of biological processes, from flagella-driven cell transport to the polymeric structure of complex fluids. Such problems have historically been computationally expensive due to numerical stiffness associated with the inextensibility constraint, as well as the often non-trivial boundary conditions on the go… ▽ More The dynamics of geometrically non-linear flexible filaments play an important role in a host of biological processes, from flagella-driven cell transport to the polymeric structure of complex fluids. Such problems have historically been computationally expensive due to numerical stiffness associated with the inextensibility constraint, as well as the often non-trivial boundary conditions on the governing high-order PDEs. Formulating the problem for the evolving shape of a filament via an integral equation in the tangent angle has recently been found to greatly alleviate this numerical stiffness. The contribution of the present manuscript is to enable the simulation of non-local interactions of multiple filaments in a computationally efficient manner using the method of regularized stokeslets within this framework. The proposed method is benchmarked against a non-local bead and link model, and recent code utilizing a local drag velocity law. Systems of multiple filaments (1) in a background fluid flow, (2) under a constant body force, and (3) undergoing active self-motility are modeled efficiently. Buckling instabilities are analyzed by examining the evolving filament curvature, as well as by coarse-graining the body frame tangent angles using a Chebyshev approximation for various choices of the relevant non-dimensional parameters. From these experiments, insight is gained into how filament-filament interactions can promote buckling, and further reveal the complex fluid dynamics resulting from arrays of these interacting fibers. By examining active moment-driven filaments, we investigate the speed of worm- and sperm-like swimmers for different governing parameters. The MATLAB(R) implementation is made available as an open-source library, enabling flexible extension for alternate discretizations and different surrounding flows. △ Less

Submitted 3 October, 2019; v1 submitted 8 March, 2019; originally announced March 2019.

Comments: 37 pages, 17 figures

MSC Class: 76Z10; 76D07; 74F10; 45B05; 65R20; 65Z05

Journal ref: Phys. Rev. Fluids 4, 113101 (2019)

Selection type results and fixed point property for affine bi-Lipschitz maps

Authors: Cleon S. Barroso, Torrey M. Gallagher

Abstract: We obtain a refinement of a selection principle for $(\mathcal{K}, λ)$-wide-$(s)$ sequences in Banach spaces due to Rosenthal. This result is then used to show that if $C$ is a bounded, non-weakly compact, closed convex subset of a Banach space $X$, then there exists a Hausdorff vector topology $τ$ on $X$ which is weaker than the weak topology, a closed, convex $τ$-compact subset $K$ of $C$ and an… ▽ More We obtain a refinement of a selection principle for $(\mathcal{K}, λ)$-wide-$(s)$ sequences in Banach spaces due to Rosenthal. This result is then used to show that if $C$ is a bounded, non-weakly compact, closed convex subset of a Banach space $X$, then there exists a Hausdorff vector topology $τ$ on $X$ which is weaker than the weak topology, a closed, convex $τ$-compact subset $K$ of $C$ and an affine bi-Lipschitz map $T: K\to K$ without fixed points. △ Less

Submitted 27 February, 2019; originally announced February 2019.

Comments: 15 pages, comments are more than welcome

Dense gas is not enough: environmental variations in the star formation efficiency of dense molecular gas at 100pc scales in M51

Authors: M. Querejeta, E. Schinnerer, A. Schruba, E. Murphy, S. Meidt, A. Usero, A. K. Leroy, J. Pety, F. Bigiel, M. Chevance, C. M. Faesi, M. Gallagher, S. García-Burillo, S. C. O. Glover, A. P. S. Hygate, M. J. Jiménez-Donaire, J. M. D. Kruijssen, E. Momjian, E. Rosolowsky, D. Utomo

Abstract: It remains unclear what sets the efficiency with which molecular gas transforms into stars. Here we present a new VLA map of the spiral galaxy M51 in 33GHz radio continuum, an extinction-free tracer of star formation, at 3" scales (~100pc). We combined this map with interferometric PdBI/NOEMA observations of CO(1-0) and HCN(1-0) at matched resolution for three regions in M51 (central molecular rin… ▽ More It remains unclear what sets the efficiency with which molecular gas transforms into stars. Here we present a new VLA map of the spiral galaxy M51 in 33GHz radio continuum, an extinction-free tracer of star formation, at 3" scales (~100pc). We combined this map with interferometric PdBI/NOEMA observations of CO(1-0) and HCN(1-0) at matched resolution for three regions in M51 (central molecular ring, northern and southern spiral arm segments). While our measurements roughly fall on the well-known correlation between total infrared and HCN luminosity, bridging the gap between Galactic and extragalactic observations, we find systematic offsets from that relation for different dynamical environments probed in M51, e.g. the southern arm segment is more quiescent due to low star formation efficiency (SFE) of the dense gas, despite having a high dense gas fraction. Combining our results with measurements from the literature at 100pc scales, we find that the SFE of the dense gas and the dense gas fraction anti-correlate and correlate, respectively, with the local stellar mass surface density. This is consistent with previous kpc-scale studies. In addition, we find a significant anti-correlation between the SFE and velocity dispersion of the dense gas. Finally, we confirm that a correlation also holds between star formation rate surface density and the dense gas fraction, but it is not stronger than the correlation with dense gas surface density. Our results are hard to reconcile with models relying on a universal gas density threshold for star formation and suggest that turbulence and galactic dynamics play a major role in setting how efficiently dense gas converts into stars. △ Less

Submitted 9 April, 2019; v1 submitted 27 February, 2019; originally announced February 2019.

Comments: 23 pages, 9 figures, accepted for publication in A&A

Journal ref: A&A 625, A19 (2019)

Do Spectroscopic Dense Gas Fractions Track Molecular Cloud Surface Densities?

Authors: Molly J. Gallagher, Adam K. Leroy, Frank Bigiel, Diane Cormier, María J. Jiménez-Donaire, Annie Hughes, Jérôme Pety, Eva Schinnerer, Jiayi Sun, Antonio Usero, Dyas Utomo, Alberto Bolatto, Mélanie Chevance, Christopher M. Faesi, Simon C. O. Glover, Amanda A. Kepley, J. M. Diederik Kruijssen, Mark R. Krumholz, Sharon E. Meidt, David S. Meier, Eric J. Murphy, Miguel Querejeta, Erik Rosolowsky, Toshiki Saito, Andreas Schruba

Abstract: We use ALMA and IRAM 30-m telescope data to investigate the relationship between the spectroscopically-traced dense gas fraction and the cloud-scale (120 pc) molecular gas surface density in five nearby, star-forming galaxies. We estimate the dense gas mass fraction at 650 pc and 2800 pc scales using the ratio of HCN (1-0) to CO (1-0) emission. We then use high resolution (120 pc) CO (2-1) maps to… ▽ More We use ALMA and IRAM 30-m telescope data to investigate the relationship between the spectroscopically-traced dense gas fraction and the cloud-scale (120 pc) molecular gas surface density in five nearby, star-forming galaxies. We estimate the dense gas mass fraction at 650 pc and 2800 pc scales using the ratio of HCN (1-0) to CO (1-0) emission. We then use high resolution (120 pc) CO (2-1) maps to calculate the mass-weighted average molecular gas surface density within 650 pc or 2770 pc beam where the dense gas fraction is estimated. On average, the dense gas fraction correlates with the mass-weighted average molecular gas surface density. Thus, parts of a galaxy with higher mean cloud-scale gas surface density also appear to have a larger fraction of dense gas. The normalization and slope of the correlation do vary from galaxy to galaxy and with the size of the regions studied. This correlation is consistent with a scenario where the large-scale environment sets the gas volume density distribution, and this distribution manifests in both the cloud-scale surface density and the dense gas mass fraction. △ Less

Submitted 19 November, 2018; originally announced November 2018.

Comments: 11 pages, 4 figures, accepted for publication in The Astrophysical Journal Letters

Exchangeability and Kernel Invariance in Trained MLPs

Authors: Russell Tsuchida, Fred Roosta, Marcus Gallagher

Abstract: In the analysis of machine learning models, it is often convenient to assume that the parameters are IID. This assumption is not satisfied when the parameters are updated through training processes such as SGD. A relaxation of the IID condition is a probabilistic symmetry known as exchangeability. We show the sense in which the weights in MLPs are exchangeable. This yields the result that in certa… ▽ More In the analysis of machine learning models, it is often convenient to assume that the parameters are IID. This assumption is not satisfied when the parameters are updated through training processes such as SGD. A relaxation of the IID condition is a probabilistic symmetry known as exchangeability. We show the sense in which the weights in MLPs are exchangeable. This yields the result that in certain instances, the layer-wise kernel of fully-connected layers remains approximately constant during training. We identify a sharp change in the macroscopic behavior of networks as the covariance between weights changes from zero. △ Less

Submitted 27 October, 2018; v1 submitted 19 October, 2018; originally announced October 2018.

Comments: 26 pages, 16 Figures; Changed Fred (Farbod) Roosta to Fred Roosta in Metadata

Non-identifiability of parameters for a class of shear-thinning rheological models, with implications for haematological fluid dynamics

Authors: Meurig T. Gallagher, Richard A. J. Wain, Sonia Dari, Justin P. Whitty, David J. Smith

Abstract: Choosing a suitable model and determining its associated parameters from fitting to experimental data is fundamental for many problems in biomechanics. Models of shear-thinning complex fluids, dating from the work of Bird, Carreau, Cross and Yasuda, have been applied in highly-cited computational studies of heamodynamics for several decades. In this manuscript we revisit these models, first to hig… ▽ More Choosing a suitable model and determining its associated parameters from fitting to experimental data is fundamental for many problems in biomechanics. Models of shear-thinning complex fluids, dating from the work of Bird, Carreau, Cross and Yasuda, have been applied in highly-cited computational studies of heamodynamics for several decades. In this manuscript we revisit these models, first to highlight a degree of uncertainty in the naming conventions in the literature, but more importantly to address the problem of inferring model parameters by fitting rheology experiments. By refitting published data, and also by simulation, we find large, flat regions in likelihood surfaces that yield families of parameter sets which fit the data equally well. Despite having almost indistinguishable fits to experimental data these varying parameter sets can predict very different flow profiles, and as such these parameters cannot be used to draw conclusions about physical properties of the fluids, such as zero-shear viscosity or relaxation time of the fluid, or indeed flow behaviours. We verify that these features are not a consequence of the experimental data sets through simulations; by sampling points from the rheological models and adding a small amount of noise we create a synthetic data set which reveals that the problem of parameter identifiability is intrinsic to these models. △ Less

Submitted 4 October, 2018; originally announced October 2018.

Comments: 19 pages, 9 colour figures

Dense Molecular Gas in the Nearby Low Metallicity Dwarf Starburst Galaxy IC 10

Authors: Amanda A. Kepley, Lauren Bittle, Adam K. Leroy, Maria J. Jimenez-Donaire, Andreas Schruba, Frank Bigiel, Molly Gallagher, Kelsey Johnson, Antonio Usero

Abstract: Dense molecular gas and star formation are correlated in galaxies. The effect of low metallicity on this relationship is crucial for interpreting observations of high redshift galaxies, which have lower metallicities than galaxies today. However, it remains relatively unexplored because dense molecular gas tracers like HCN and HCO+ are faint in low metallicity systems. We present Green Bank Telesc… ▽ More Dense molecular gas and star formation are correlated in galaxies. The effect of low metallicity on this relationship is crucial for interpreting observations of high redshift galaxies, which have lower metallicities than galaxies today. However, it remains relatively unexplored because dense molecular gas tracers like HCN and HCO+ are faint in low metallicity systems. We present Green Bank Telescope observations of HCN(1-0) and HCO+(1-0) on giant molecular cloud (34pc) scales in the nearby low metallicity ($12+\log({\rm O/H})=8.2$) starburst IC 10 and compare them to those in other galaxies. We detect HCN and HCO+ in one and three of five pointings, respectively. The $I_{\rm HCN}/I_{\rm HCO+}$ values are within the range seen in other galaxies, but are most similar to those seen in other low metallicity sources and in starbursts. The detections follow the fiducial $L_{\rm IR}$-$L_{\rm HCN}$ and $L_{\rm IR}$-$L_{\rm HCO+}$ relationships. These trends suggest that HCN and HCO+ can be used to trace dense molecular gas at metallicities of 1/4 $Z_\odot$, to first order. The dense gas fraction is similar to that in spiral galaxies, but lower than that in U/LIRGs. The dense molecular gas star formation efficiency, however, is on the upper end of those in normal galaxies and consistent with those in U/LIRGs. These results suggest that the CO and HCN/HCO+ emission occupy the same relative volumes as at higher metallicity, but that the entire emitting structure is reduced in size. Dense gas mass estimates for high redshift galaxies may need to be corrected for this effect. △ Less

Submitted 20 June, 2018; originally announced June 2018.

Comments: Accepted to ApJ

A Proof of the Strict Monotone 5-step Conjecture

Authors: J. Mackenzie Gallagher, Walter D. Morris, Jr

Abstract: A computer search through the oriented matroid programs with dimension 5 and 10 facets shows that the maximum strictly monotone diameter is 5. Thus $Δ_{sm}(5,10)=5$. This enumeration is analogous to that of Bremner and Schewe for the non-monotone diameter of 6-polytopes with 12 facets. Similar enumerations show that $Δ_{sm}(4,9)=5$ and $Δ_m(4,9)=Δ_m(5,10)=6.$ We shorten the known non-computer proo… ▽ More A computer search through the oriented matroid programs with dimension 5 and 10 facets shows that the maximum strictly monotone diameter is 5. Thus $Δ_{sm}(5,10)=5$. This enumeration is analogous to that of Bremner and Schewe for the non-monotone diameter of 6-polytopes with 12 facets. Similar enumerations show that $Δ_{sm}(4,9)=5$ and $Δ_m(4,9)=Δ_m(5,10)=6.$ We shorten the known non-computer proof of the strict monotone 4-step conjecture. △ Less

Submitted 29 June, 2018; v1 submitted 8 June, 2018; originally announced June 2018.

Comments: In Sections 2 and 3, "n-d" and "d" had been switched

MSC Class: 52B05

Sharp quadrature error bounds for the nearest-neighbor discretization of the regularized stokeslet boundary integral equation

Authors: Meurig T. Gallagher, Debajyoti Choudhuri, David J. Smith

Abstract: The method of regularized stokeslets is a powerful numerical method to solve the Stokes flow equations for problems in biological fluid mechanics. A recent variation of this method incorporates a nearest-neighbor discretization to improve accuracy and efficiency while maintaining the ease-of-implementation of the original meshless method. This method contains three sources of numerical error, the… ▽ More The method of regularized stokeslets is a powerful numerical method to solve the Stokes flow equations for problems in biological fluid mechanics. A recent variation of this method incorporates a nearest-neighbor discretization to improve accuracy and efficiency while maintaining the ease-of-implementation of the original meshless method. This method contains three sources of numerical error, the regularization error associated from using the regularized form of the boundary integral equations (with parameter $\varepsilon$), and two sources of discretization error associated with the force and quadrature discretizations (with lengthscales $h_f$ and $h_q$). A key issue to address is the quadrature error: initial work has not fully explained observed numerical convergence phenomena. In the present manuscript we construct sharp quadrature error bounds for the nearest-neighbor discretisation, noting that the error for a single evaluation of the kernel depends on the smallest distance ($δ$) between these discretization sets. The quadrature error bounds are described for two cases: with disjoint sets ($δ>0$) being close to linear in $h_q$ and insensitive to $\varepsilon$, and contained sets ($δ=0$) being quadratic in $h_q$ with inverse dependence on $\varepsilon$. The practical implications of these error bounds are discussed with reference to the condition number of the matrix system for the nearest-neighbor method, with the analysis revealing that the condition number is insensitive to $\varepsilon$ for disjoint sets, and grows linearly with $\varepsilon$ for contained sets. Error bounds for the general case ($δ\geq 0$) are revealed to be proportional to the sum of the errors for each case. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 12 pages, 6 figures

New constraints on oscillation parameters from $ν_e$ appearance and $ν_μ$ disappearance in the NOvA experiment

Authors: M. A. Acero, P. Adamson, L. Aliaga T. Alion, V. Allakhverdian, N. Anfimov A. Antoshkin, E. Arrieta-Diaz, A. Aurisano A. Back, C. Backhouse, M. Baird N. Balashov, B. A. Bambah, K. Bays B. Behera, S. Bending, R. Bernstein V. Bhatnagar, B. Bhuyan, J. Bian T. Blackburn, J. Blair, A. Bolshakova P. Bour, C. Bromberg, J. Brown N. Buchanan, A. Butkevich, V. Bychkov M. Campbell, T. J. Carroll, E. Catano-Mur A. Cedeno, S. Childress, B. C. Choudhary B. Chowdhury , et al. (104 additional authors not shown)

Abstract: We present updated results from the NOvA experiment for $ν_μ\rightarrowν_μ$ and $ν_μ\rightarrowν_e$ oscillations from an exposure of $8.85\times10^{20}$ protons on target, which represents an increase of 46% compared to our previous publication. The results utilize significant improvements in both the simulations and analysis of the data. A joint fit to the data for $ν_μ$ disappearance and $ν_e$ a… ▽ More We present updated results from the NOvA experiment for $ν_μ\rightarrowν_μ$ and $ν_μ\rightarrowν_e$ oscillations from an exposure of $8.85\times10^{20}$ protons on target, which represents an increase of 46% compared to our previous publication. The results utilize significant improvements in both the simulations and analysis of the data. A joint fit to the data for $ν_μ$ disappearance and $ν_e$ appearance gives the best fit point as normal mass hierarchy, $Δm^2_{32} = 2.44\times 10^{-3}{{\rm eV}^2}/c^4$, $\sin^2θ_{23} = 0.56$, and $δ_{CP} = 1.21π$. The 68.3% confidence intervals in the normal mass hierarchy are $Δm^2_{32} \in [2.37,2.52]\times 10^{-3}{{\rm eV}^2}/c^4$, $\sin^2θ_{23} \in [0.43,0.51] \cup [0.52,0.60]$, and $δ_{CP} \in [0,0.12π] \cup [0.91π,2π]$. The inverted mass hierarchy is disfavored at the 95% confidence level for all choices of the other oscillation parameters. △ Less

Submitted 6 August, 2018; v1 submitted 31 May, 2018; originally announced June 2018.

Journal ref: Phys. Rev. D 98, 032012 (2018)

Modelling pulsatile blood flow through surgically coupled microvascular anastomoses

Authors: Meurig T. Gallagher

Abstract: The significant rates of post-operative arterial thrombus formation following the sutured anastomosis (surgical connection) of vessels in microvascular reconstruction has kindled the development of engineered solutions such as the UNILINK coupler. These devices reduce thrombosis rates, which recent numerical studies suggest to be due to decreases in shear strain rate across the anastomosis site wh… ▽ More The significant rates of post-operative arterial thrombus formation following the sutured anastomosis (surgical connection) of vessels in microvascular reconstruction has kindled the development of engineered solutions such as the UNILINK coupler. These devices reduce thrombosis rates, which recent numerical studies suggest to be due to decreases in shear strain rate across the anastomosis site when compared to sutured vessels. In this work we develop and analytically solve the first mathematical model for the problem of microvascular anastomosis, leading to the discovery that the rates of thrombosis using these surgical coupling devices could be further reduced by decreasing the gradient of the wall deformation at the join. △ Less

Submitted 17 April, 2018; v1 submitted 13 April, 2018; originally announced April 2018.

Comments: 8 pages, 3 figures

Dense Gas, Dynamical Equilibrium Pressure, and Star Formation in Nearby Star-Forming Galaxies

Authors: Molly J. Gallagher, Adam K. Leroy, Frank Bigiel, Diane Cormier, María J. Jiménez-Donaire, Eve Ostriker, Antonio Usero, Alberto D. Bolatto, Santiago García-Burillo, Annie Hughes, Amanda A. Kepley, Mark Krumholz, Sharon E. Meidt, David S. Meier, Eric J. Murphy, Jérôme Pety, Erik Rosolowsky, Eva Schinnerer, Andreas Schruba, Fabian Walter

Abstract: We use new ALMA observations to investigate the connection between dense gas fraction, star formation rate, and local environment across the inner region of four local galaxies showing a wide range of molecular gas depletion times. We map HCN (1-0), HCO$^+$ (1-0), CS (2-1), $^{13}$CO (1-0), and C$^{18}$O (1-0) across the inner few kpc of each target. We combine these data with short spacing inform… ▽ More We use new ALMA observations to investigate the connection between dense gas fraction, star formation rate, and local environment across the inner region of four local galaxies showing a wide range of molecular gas depletion times. We map HCN (1-0), HCO$^+$ (1-0), CS (2-1), $^{13}$CO (1-0), and C$^{18}$O (1-0) across the inner few kpc of each target. We combine these data with short spacing information from the IRAM large program EMPIRE, archival CO maps, tracers of stellar structure and recent star formation, and recent HCN surveys by Bigiel et al. and Usero et al. We test the degree to which changes in the dense gas fraction drive changes in the SFR. $I_{HCN}/I_{CO}$ (tracing the dense gas fraction) correlates strongly with $I_{CO}$ (tracing molecular gas surface density), stellar surface density, and dynamical equilibrium pressure, $P_{DE}$. Therefore, $I_{HCN}/I_{CO}$ becomes very low and HCN becomes very faint at large galactocentric radii, where ratios as low as $I_{HCN}/I_{CO} \sim 0.01$ become common. The apparent ability of dense gas to form stars, $Σ_{SFR}/Σ_{dense}$ (where $Σ_{dense}$ is traced by the HCN intensity and the star formation rate is traced by a combination of H$α$ and 24$μ$m emission), also depends on environment. $Σ_{SFR}/Σ_{dense}$ decreases in regions of high gas surface density, high stellar surface density, and high $P_{DE}$. Statistically, these correlations between environment and both $Σ_{SFR}/Σ_{dense}$ and $I_{HCN}/I_{CO}$ are stronger than that between apparent dense gas fraction ($I_{HCN}/I_{CO}$) and the apparent molecular gas star formation efficiency $Σ_{SFR}/Σ_{mol}$. We show that these results are not specific to HCN. △ Less

Submitted 28 March, 2018; originally announced March 2018.

Comments: 31 pages, 13 figures, accepted for publication in The Astrophysical Journal, email for access to data table before publication

Meshfree and efficient modelling of swimming cells

Authors: Meurig T. Gallagher, David J. Smith

Abstract: Locomotion in Stokes flow is an intensively-studied problem because it describes important biological phenomena such as the motility of many species' sperm, bacteria, algae and protozoa. Numerical computations can be challenging, particularly in three dimensions, due to the presence of moving boundaries and complex geometries; methods which combine ease-of-implementation and computational efficien… ▽ More Locomotion in Stokes flow is an intensively-studied problem because it describes important biological phenomena such as the motility of many species' sperm, bacteria, algae and protozoa. Numerical computations can be challenging, particularly in three dimensions, due to the presence of moving boundaries and complex geometries; methods which combine ease-of-implementation and computational efficiency are therefore needed. A recently-proposed method to discretise the regularised Stokeslet boundary integral equation without the need for a connected 'mesh' is applied to the inertialess locomotion problem in Stokes flow. The mathematical formulation and key aspects of the computational implementation in MATLAB/GNU Octave are described, followed by numerical experiments with biflagellate algae and multiple uniflagellate sperm swimming between no-slip surfaces, for which both swimming trajectories and flow fields are calculated. These computational experiments required minutes of time on modest hardware; an extensible implementation is provided in a github repository. The nearest neighbour discretisation dramatically improves convergence and robustness, a key challenge in extending the regularised Stokeslet method to complicated, three dimensional, biological fluid problems. △ Less

Submitted 11 May, 2018; v1 submitted 12 January, 2018; originally announced January 2018.

Comments: 27 pages, 3 figures