-
Long-Term Stability of Graphene/c-Si Schottky-Junction Solar Cells
Authors:
Djordje Jovanović,
Miloš Petrović,
Tijana Tomašević-Ilić,
Aleksandar Matković,
Matevž Bokalič,
Marko Spasenović,
Konstantinos Rogdakis,
Emmannuel Kymakis,
Dragan Knežević,
Lucio Cinà,
Radoš Gajić
Abstract:
A long operational lifetime is required for the use of solar cells in real-life photovoltaic applications. The optimization of operational lifetimes is achieved through understanding the inherent degradation phenomena in solar cells. In this study, graphene/Si Schottky-junction solar cells were produced, utilizing liquid-phase-exfoliated graphene as an active surface. The operational and interface…
▽ More
A long operational lifetime is required for the use of solar cells in real-life photovoltaic applications. The optimization of operational lifetimes is achieved through understanding the inherent degradation phenomena in solar cells. In this study, graphene/Si Schottky-junction solar cells were produced, utilizing liquid-phase-exfoliated graphene as an active surface. The operational and interface stability of these solar cells over a period of 5 years in ambient conditions (following ISOS-D protocols: dark storage/shelf life) was examined, and the origin of their degradation was reported. It was found that the dominant degradation mechanism could be attributed to the degradation of silver contacts. This was indicated by a decrease in shunt resistance, an increase in the ideality factor (due to a higher carrier recombination), and a constant defect density in graphene films for up to 4 years. Measurements across the solar cell's active area during the 5-year period revealed neither significant spatial inhomogeneity, nor shunt channel defects.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Low-friction, wear-resistant, and electrically homogeneous multilayer graphene grown by chemical vapor deposition on molybdenum
Authors:
Borislav Vasić,
Uroš Ralević,
Katarina Cvetanović-Zobenica,
Milče M. Smiljanić,
Radoš Gajić,
Marko Spasenović,
Sten Vollebregt
Abstract:
Chemical vapour deposition (CVD) is a promising method for producing large-scale graphene (Gr). Nevertheless, microscopic inhomogeneity of Gr grown on traditional metal substrates such as copper or nickel results in a spatial variation of Gr properties due to long wrinkles formed when the metal substrate shrinks during the cooling part of the production cycle. Recently, molybdenum (Mo) has emerged…
▽ More
Chemical vapour deposition (CVD) is a promising method for producing large-scale graphene (Gr). Nevertheless, microscopic inhomogeneity of Gr grown on traditional metal substrates such as copper or nickel results in a spatial variation of Gr properties due to long wrinkles formed when the metal substrate shrinks during the cooling part of the production cycle. Recently, molybdenum (Mo) has emerged as an alternative substrate for CVD growth of Gr, mainly due to a better matching of the thermal expansion coefficient of the substrate and Gr. We investigate the quality of multilayer Gr grown on Mo and the relation between Gr morphology and nanoscale mechanical and electrical properties, and spatial homogeneity of these parameters. With atomic force microscopy (AFM) based scratching, Kelvin probe force microscopy, and conductive AFM, we measure friction and wear, surface potential, and local conductivity, respectively. We find that Gr grown on Mo is free of large wrinkles that are common with growth on other metals, although it contains a dense network of small wrinkles. We demonstrate that as a result of this unique and favorable morphology, the Gr studied here has low friction, high wear resistance, and excellent homogeneity of electrical surface potential and conductivity.
△ Less
Submitted 28 November, 2019;
originally announced November 2019.
-
Reducing sheet resistance of self-assembled transparent graphene films by defect patching and do** with UV/ozone treatment
Authors:
Tijana Tomašević-Ilić,
Djordje Jovanović,
Igor Popov,
Rajveer Fandan,
Jorge Pedrós,
Marko Spasenović,
Radoš Gajić
Abstract:
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that re…
▽ More
Liquid phase exfoliation followed by Langmuir-Blodgett self-assembly (LBSA) is a promising method for scalable production of thin graphene films for transparent conductor applications. However, monolayer assembly into thin films often induces a high density of defects, resulting in a large sheet resistance that hinders practical use. We introduce UV/ozone as a novel photochemical treatment that reduces sheet resistance of LBSA graphene threefold, while preserving the high optical transparency. The effect of such treatment on our films is opposite to the effect it has on mechanically exfoliated or CVD films, where UV/ozone creates additional defects in the graphene plane, increasing sheet resistance. Raman scattering shows that exposure to UV/ozone reduces the defect density in LBSA graphene, where edges are the dominant defect type. FTIR spectroscopy indicates binding of oxygen to the graphene lattice during exposure to ozone. In addition, work function measurements reveal that the treatment dopes the LBSA film, making it more conductive. Such defect patching paired with do** leads to an accessible way of improving the transparent conductor performance of LBSA graphene, making solution-processed thin films a candidate for industrial use.
△ Less
Submitted 16 August, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Molecules on rails: friction anisotropy and preferential sliding directions of organic nanocrystallites on two-dimensional materials
Authors:
Borislav Vasić,
Igor Stanković,
Aleksandar Matković,
Markus Kratzer,
Christian Ganser,
Radoš Gajić,
Christian Teichert
Abstract:
Two-dimensional (2D) materials are envisaged as ultra-thin solid lubricants for nano-mechanical systems. So far, their frictional properties at the nanoscale have been studied by standard friction force microscopy. However, lateral manipulation of nanoparticles is a more suitable method to study the dependence of friction on the crystallography of two contacting surfaces. Still, such experiments a…
▽ More
Two-dimensional (2D) materials are envisaged as ultra-thin solid lubricants for nano-mechanical systems. So far, their frictional properties at the nanoscale have been studied by standard friction force microscopy. However, lateral manipulation of nanoparticles is a more suitable method to study the dependence of friction on the crystallography of two contacting surfaces. Still, such experiments are lacking. In this study, we combine atomic force microscopy (AFM) based lateral manipulation and molecular dynamics simulations in order to investigate the movements of organic needle-like nanocrystallites grown by van der Waals epitaxy on graphene and hexagonal boron nitride. We observe that nanoneedle fragments -- when pushed by an AFM tip -- do not move along the original pushing directions. Instead, they slide on the 2D materials preferentially along the needles' growth directions, which act as invisible rails along commensurate directions. Further, when the nanocrystallites were rotated by applying a torque with the AFM tip across the preferential sliding directions, we find an increase of the torsional signal of the AFM cantilever. We demonstrate in conjunction with simulations that both, the significant friction anisotropy and preferential sliding directions are determined by the complex epitaxial relation and arise from the commensurate and incommensurate states between the organic nanocrystallites and the 2D materials.
△ Less
Submitted 1 October, 2018;
originally announced October 2018.
-
Pyramids and cootie catchers: new massless fermions in 2D materials
Authors:
Vladimir Damljanovic,
Rados Gajic,
Igor Popov
Abstract:
Dirac-like electronic states are the main engines powering the tremendous advances in research of graphene, topological insulators and other materials with these states. Zero effective mass, high carrier mobility and numerous applications are some consequences of linear dispersion that distinguishes Dirac states. Here we report a new class of linear electronic bands in two-dimensional materials wi…
▽ More
Dirac-like electronic states are the main engines powering the tremendous advances in research of graphene, topological insulators and other materials with these states. Zero effective mass, high carrier mobility and numerous applications are some consequences of linear dispersion that distinguishes Dirac states. Here we report a new class of linear electronic bands in two-dimensional materials with zero effective mass and sharp band edges never seen in solid state matter before, and predict stable materials with such electronic structure utilizing symmetry group analysis and ab initio approach. We make a full classification of completely linear bands in two-dimensional materials and find that only two classes exist: Dirac fermions on one hand and pyramidal-like and cootie catcher-like states on the other hand. The new class supports zero effective mass and hence high carrier mobility similar to that of graphene, anisotropic electronic properties like that of phosphorene, and robustness of states with respect to electronic correlations.
△ Less
Submitted 31 October, 2016;
originally announced October 2016.
-
Charge density wave modulation and gap measurements in CeTe$_3$
Authors:
Uros Ralevic,
Nenad Lazarevic,
Andreas Baum,
Hans-Martin Eiter,
Rudi Hackl,
Paula Giraldo-Gallo,
Ian R. Fisher,
Cedomir Petrovic,
Rados Gajic,
Zoran V. Popovic
Abstract:
We present a study of charge density wave (CDW) ordering in CeTe$_3$ at room temperature using a scanning tunneling microscope and Raman spectroscopy. Two characteristic CDW ordering wavevectors obtained from the Fourier analysis are assessed to be $|{\bf \textbf{c}}^\ast-{\bf q}|=4.19\,{\rm nm}^{-1}$ and $|{\bf q}|=10.26\,{\rm nm}^{-1}$ where $|{\bf c}^\ast| = 2π/c$ is the reciprocal lattice vect…
▽ More
We present a study of charge density wave (CDW) ordering in CeTe$_3$ at room temperature using a scanning tunneling microscope and Raman spectroscopy. Two characteristic CDW ordering wavevectors obtained from the Fourier analysis are assessed to be $|{\bf \textbf{c}}^\ast-{\bf q}|=4.19\,{\rm nm}^{-1}$ and $|{\bf q}|=10.26\,{\rm nm}^{-1}$ where $|{\bf c}^\ast| = 2π/c$ is the reciprocal lattice vector. The scanning tunneling spectroscopy measurements, along with inelastic light (Raman) scattering measurements, show a CDW gap $Δ_{\rm max}$ of approximately 0.37 eV. In addition to the CDW modulation, we observe an organization of the Te sheet atoms in an array of alternating V- and N- groups along the CDW modulation, as predicted in the literature.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
Existence of Dirac cones in Brillouin zone of diperiodic atomic crystals according to group theory
Authors:
Vladimir Damljanovic,
Rados Gajic
Abstract:
We have considered non-magnetic materials with weak spin-orbit coupling, that are periodic in two non-collinear directions, and finite in third, orthogonal direction. In some cases, combined time-reversal and crystal symmetry of such systems, allows the existence of Dirac cones at certain points in the reciprocal space. We have investigated in a systematic way, all points of Brillouin zone of all…
▽ More
We have considered non-magnetic materials with weak spin-orbit coupling, that are periodic in two non-collinear directions, and finite in third, orthogonal direction. In some cases, combined time-reversal and crystal symmetry of such systems, allows the existence of Dirac cones at certain points in the reciprocal space. We have investigated in a systematic way, all points of Brillouin zone of all 80 diperiodic groups and have found sufficient conditions for the existence of s=1/2 Dirac fermions, with symmetry-provided band touching at the vertex of the Dirac cones. Conversely, complete linear dispersion is forbidden for orbital wave-functions belonging to two-dimensional irreducible representations (irreps) of little groups that do not satisfy certain group-theoretical conditions given in this paper. Our results are illustrated by a tight-binding example.
△ Less
Submitted 30 October, 2015;
originally announced October 2015.
-
Multilayer graphene condenser microphone
Authors:
Dejan Todorović,
Aleksandar Matković,
Marijana Milićević,
Đorđe Jovanović,
Radoš Gajić,
Iva Salom,
Marko Spasenović
Abstract:
Vibrating membranes are the cornerstone of acoustic technology, forming the backbone of modern loudspeakers and microphones. Acoustic performance of condenser microphone is derived mainly from the membrane's size and achievable static tension. The widely studied and available nickel has been the one of dominant membrane material for several decades. In this paper we introduce multilayer graphene a…
▽ More
Vibrating membranes are the cornerstone of acoustic technology, forming the backbone of modern loudspeakers and microphones. Acoustic performance of condenser microphone is derived mainly from the membrane's size and achievable static tension. The widely studied and available nickel has been the one of dominant membrane material for several decades. In this paper we introduce multilayer graphene as membrane material for a condenser microphone. The graphene device outperforms a high end commercial nickel-based microphone over a significant part of the acoustic spectrum, with a larger than 10 dB enhancement of sensitivity. Our experimental results are supported with numerical simulations, which show that a 300 layer thick graphene membrane under maximum tension would offer excellent extension of the frequency range, up to 1 MHz, with similar sensitivity as commercial condenser microphones.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Strain Enhanced Superconductivity in Li-Doped Graphene
Authors:
Jelena Pešić,
Radoš Gajić,
Kurt Hingerl,
Milivoj Belić
Abstract:
We present a new way to enhance the electron-phonon coupling constant and the critical superconducting temperature of graphene, significantly beyond all reported values. Using density functional theory, we explore the application effects of the tensile biaxial strain on the lithium intercalated graphene. Both effects together, the presence of adatom and the strain, trigger enhancement of critical…
▽ More
We present a new way to enhance the electron-phonon coupling constant and the critical superconducting temperature of graphene, significantly beyond all reported values. Using density functional theory, we explore the application effects of the tensile biaxial strain on the lithium intercalated graphene. Both effects together, the presence of adatom and the strain, trigger enhancement of critical temperature, up to 300\%, compared to non-strained lithium intercalated graphene.
△ Less
Submitted 5 December, 2014;
originally announced December 2014.
-
Coordinate transformation based design of confined metamaterial structures
Authors:
Borislav Vasić,
Goran Isić,
Radoš Gajić,
Kurt Hingerl
Abstract:
The coordinate transformation method is applied to bounded domains to design metamaterial devices for steering spatially confined electromagnetic fields. Both waveguide and free-space beam applications are considered as these are analogous within the present approach. In particular, we describe devices that bend the propagation direction and squeeze confined electromagnetic fields. Two approache…
▽ More
The coordinate transformation method is applied to bounded domains to design metamaterial devices for steering spatially confined electromagnetic fields. Both waveguide and free-space beam applications are considered as these are analogous within the present approach. In particular, we describe devices that bend the propagation direction and squeeze confined electromagnetic fields. Two approaches in non-magnetic realization of these structures are examined. The first is based on using a reduced set of material parameters, and the second on finding non-magnetic transformation media. It is shown that transverse-magnetic fields can be bent or squeezed to an arbitrary extent and without reflection using only dielectric structures.
△ Less
Submitted 17 January, 2009; v1 submitted 26 July, 2008;
originally announced July 2008.
-
Refraction and rightness in photonic crystals
Authors:
Rados Gajic,
Ronald Meisels,
Friedemar Kuchar,
Kurt Hingerl
Abstract:
We present a study on relation between the refraction and rightness effects in photonic crystals applied on a 2D square lattice photonic crystal. The plane wave (the band and equifrequency contour analyses) and FDTD calculations for both TM and TE modes revealed all possible refraction and rightness cases in photonic crystal structures in the first three bands. In particular, we show for the fir…
▽ More
We present a study on relation between the refraction and rightness effects in photonic crystals applied on a 2D square lattice photonic crystal. The plane wave (the band and equifrequency contour analyses) and FDTD calculations for both TM and TE modes revealed all possible refraction and rightness cases in photonic crystal structures in the first three bands. In particular, we show for the first time, a possibility of the left-handed positive refraction. This means that left-handedness does not necessarily imply negative refraction in photonic crystals.
△ Less
Submitted 1 May, 2006;
originally announced May 2006.
-
All-angle left-handed negative refraction in Kagome and honeycomb lattice photonic crystals
Authors:
Rados Gajic,
Ronald Meisels,
Friedemar Kuchar,
Kurt Hingerl
Abstract:
Possibilities of all-angle left-handed negative refraction in 2D honeycomb and Kagome lattices made of dielectric rods in air are discussed for the refractive indices 3.1 and 3.6. In contrast to triangular lattice photonic crystals made of rods in air, both the honeycomb and Kagome lattices show all-angle left-handed negative refraction in the case of the TM2 band for low normalized frequencies.…
▽ More
Possibilities of all-angle left-handed negative refraction in 2D honeycomb and Kagome lattices made of dielectric rods in air are discussed for the refractive indices 3.1 and 3.6. In contrast to triangular lattice photonic crystals made of rods in air, both the honeycomb and Kagome lattices show all-angle left-handed negative refraction in the case of the TM2 band for low normalized frequencies. Certain advantages of the honeycomb and Kagome structures over the triangular lattice are emphasized. This specially concerns the honeycomb lattice with its circle-like equifrequency contours where the effective indices are close to -1 for a wide range of incident angles and frequencies.
△ Less
Submitted 1 May, 2006;
originally announced May 2006.
-
Optical properties of NaxV2O5
Authors:
M. J. Konstantinovic,
Z. V. Popovic,
V. V. Moshchalkov,
C. Presura,
R. Gajic,
M. Isobe,
Y. Ueda
Abstract:
The optical properties of sodium-deficient NaxV2O5 (0.85 < x <1) single crystals are analyzed in the wide energy range, from 0.012 to 4.5 eV, using ellipsometry, infrared reflectivity, and Raman scattering techniques. The material remains insulating up to the maximal achieved hole concentration of about 15%. In sodium deficient samples the optical absorption peak associated to the fundamental el…
▽ More
The optical properties of sodium-deficient NaxV2O5 (0.85 < x <1) single crystals are analyzed in the wide energy range, from 0.012 to 4.5 eV, using ellipsometry, infrared reflectivity, and Raman scattering techniques. The material remains insulating up to the maximal achieved hole concentration of about 15%. In sodium deficient samples the optical absorption peak associated to the fundamental electronic gap develops at about 0.44 eV. It corresponds to the transition between vanadium dxy and the impurity band, which forms in the middle of the pure NaV2O5 gap. Raman spectra measured with incident photon energy larger then 2 eV show strong resonant behavior, due to the presence of the hole-do** activated optical transitions, peaked at 2.8 eV.
△ Less
Submitted 14 March, 2002;
originally announced March 2002.
-
Polarized far-infrared and Raman spectra of SrCuO2 single crystals
Authors:
Z. V. Popović,
M. J. Konstantinović,
R. Gajić,
C. Thomsen,
U. Kuhlmann,
A. Vietkin
Abstract:
We measured polarized far-infrared reflectivity and Raman scattering spectra of SrCuO$_2$ single crystals. The frequencies for infrared-active modes were determined using an oscillator-fitting procedure of reflectivity data. The Raman spectra were measured at different temperatures using several laser energies $ω_L$. In addition to eight of twelve Raman active modes, predicted by factor-group an…
▽ More
We measured polarized far-infrared reflectivity and Raman scattering spectra of SrCuO$_2$ single crystals. The frequencies for infrared-active modes were determined using an oscillator-fitting procedure of reflectivity data. The Raman spectra were measured at different temperatures using several laser energies $ω_L$. In addition to eight of twelve Raman active modes, predicted by factor-group analysis, we observed a complex structure in the Raman spectra for polarization parallel to the {\bf c}-axis, which consists of Raman-allowed A$_g$ symmetry modes, and B$_{1u}$ LO infrared-active (Raman-forbidden) modes of the first and higher order as well as their combinations. The Raman-forbidden modes have a stronger intensity at higher $ω_L$ than the Raman-allowed ones. In order to explain this resonance effect, we measured the dielectric function and optical reflection spectra of SrCuO$_2$ in the visible range. We show that the Raman-allowed A$_g$ symmetry modes are resonantly enhanced when a laser energy is close to $E_0$, while Raman-forbidden (IR-active) modes resonate strongly for laser line energies close to the electronic transition of higher energy gaps.
△ Less
Submitted 16 October, 2000;
originally announced October 2000.
-
Optical Properties of the Spin-Ladder Compound Sr_{14}Cu_{24}O_{41}
Authors:
Z. V. Popović,
M. J. Konstantinović,
V. A. Ivanov,
O. P. Khuong,
R. Gajić,
A. Vietkin,
V. V. Moshchalkov
Abstract:
We report the measurements of the pseudodielectric function, far-infrared reflectivity and Raman scattering spectra in Sr_{14}Cu_{24}O_{41} single crystal. We study the lattice and the spin dynamics of the Cu$_2$O$_3$ spin ladders and CuO$_2$ chains of this compound. The ellipsometric and the optical reflectivity measurements yield the gap values of 1.4 eV, 1.86 eV, 2.34 eV (2.5 eV) for the ladd…
▽ More
We report the measurements of the pseudodielectric function, far-infrared reflectivity and Raman scattering spectra in Sr_{14}Cu_{24}O_{41} single crystal. We study the lattice and the spin dynamics of the Cu$_2$O$_3$ spin ladders and CuO$_2$ chains of this compound. The ellipsometric and the optical reflectivity measurements yield the gap values of 1.4 eV, 1.86 eV, 2.34 eV (2.5 eV) for the ladders (chains) along the {\bf c}-axis and 2.4 eV along the {\bf a}-axis. The electronic structure of the Cu$_2$O$_3$ ladders is analyzed using tight-binding approach for the correlated electron systems. The correlation gap value of 1.4 eV is calculated with the transfer energy (hop**) parameters $t=t_{0}$=0.26 eV, along and perpendicular to legs, $t_{xy}$=0.026 eV (interladder hop**) and U=2.1 eV, as a Coulomb repulsion. The optical parameters of the infrared active phonons and plasmons are obtained by oscillator fitting procedure of the reflectivity spectra. Raman scattering spectra are measured at different temperatures using different laser line energies. The two-magnon peak is observed at about 2880 cm$^{-1}$. At temperatures below 150 K the new infrared and Raman modes appear due to the charge ordering.
△ Less
Submitted 4 May, 2000;
originally announced May 2000.
-
Infrared and Raman spectra of LiV2O5 single crystals
Authors:
Z. V. Popovic,
R. Gajic,
M. J. Konstantinovic,
R. Provoost,
V. V. Moshchalkov,
A. N. Vasil'ev,
M. Isobe,
Y. Ueda
Abstract:
The phonon dynamics of LiV2O5 single crystals is studied using infrared and Raman spectroscopy techniques. The infrared-active phonon frequencies and dielectric constants are obtained by oscillator fitting procedure of the reflectivity data measured at room temperature. The Raman scattering spectra are measured at room temperature and at T=10 K in all nonequivalent polarized configurations. The…
▽ More
The phonon dynamics of LiV2O5 single crystals is studied using infrared and Raman spectroscopy techniques. The infrared-active phonon frequencies and dielectric constants are obtained by oscillator fitting procedure of the reflectivity data measured at room temperature. The Raman scattering spectra are measured at room temperature and at T=10 K in all nonequivalent polarized configurations. The assignment of the phonons is done by comparing the infrared and Raman spectra of LiV2O5 and NaV2O5. The factor-group-analysis of the LiV2O5 crystal symmetry and of its constituent layers is performed to explain the symmetry properties of the observed modes. We concluded that layer symmetry dominates in the vibrational properties of this compound.
△ Less
Submitted 12 January, 2000;
originally announced January 2000.
