-
Interferometric microscale measurement of refractive index at VIS and IR wavelengths
Authors:
Meguya Ryu,
Simonas Varapnickas,
Darius Gailevicius,
Domas Paipulas,
Eulalia Puig Vilardell,
Zahra Khajehsaeidimahabadi,
Saulius Juodkazis,
Junko Morikawa,
Mangirdas Malinauskas
Abstract:
Determination of refractive index of micro-disks of a calcinated ($1100^\circ$C in air) photo-resist SZ2080$^\mathrm{TM}$ was carried out using transmission and reflection spectroscopy. Interference fringes at specific wavenumbers/wavelengths were selected for determination of the optical thickness, hence, the refractive index when the thickness of micro-disks was measured by scanning electron mic…
▽ More
Determination of refractive index of micro-disks of a calcinated ($1100^\circ$C in air) photo-resist SZ2080$^\mathrm{TM}$ was carried out using transmission and reflection spectroscopy. Interference fringes at specific wavenumbers/wavelengths were selected for determination of the optical thickness, hence, the refractive index when the thickness of micro-disks was measured by scanning electron microscopy (SEM). Refractive index of disks of $\sim 6\pm 1~μ$m thickness were determined at visible and IR (2.5-13~$μ$m) spectral ranges and where $2.2\pm 0.2$ at visible and IR wavelengths. Peculiarities of optical characterisation of micro-optical structures are discussed in view of possible uncertainties in the definition of geometric parameters, shape and mass density redistribution.
△ Less
Submitted 3 June, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
Extremely Narrow, Sharp-Peaked Resonances at the Edge of the Continuum
Authors:
Ignas Lukosiunas,
Lina Grineviciute,
Julianija Nikitina,
Darius Gailevicius,
Kestutis Staliunas
Abstract:
We report a critical narrowing of resonances of a driven potential well, when their eigenfrequencies approach the edge of the continuum. The resonances also obtain unusual sharp-peak shapes at the continuum boundary. The situation can be realized for the electromagnetic wave propagating across the dielectric thin films with a periodically modulated interface(s). We show the general phenomenon semi…
▽ More
We report a critical narrowing of resonances of a driven potential well, when their eigenfrequencies approach the edge of the continuum. The resonances also obtain unusual sharp-peak shapes at the continuum boundary. The situation can be realized for the electromagnetic wave propagating across the dielectric thin films with a periodically modulated interface(s). We show the general phenomenon semi-analytically on a simplified model of a driven quantum potential well, also by rigorous numerical analysis of Maxwell equations for the wave propagation across the thin film with a modulated interface(s). We justify the phenomenon experimentally, by the measurements of light reflection from the dielectric thin film deposited on a periodically modulated surface. The narrow and sharp-peak resonances can be used for an efficient narrow-band frequency- and spatial filtering of light.
△ Less
Submitted 3 November, 2022;
originally announced November 2022.
-
Nanostructured Multilayer Coatings for Spatial Filtering
Authors:
Lina Grineviciute,
Ceren Babayigit,
Darius Gailevičius,
Martynas Peckus,
Mirbek Turduev,
Tomas Tolenis,
Mikas Vengris,
Hamza Kurt,
Kestutis Staliunas
Abstract:
Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional filtering requires access to the far-field domain. In microlasers, however, conventional filtering is impossible due to the lack of space in micro-resonators to access…
▽ More
Spatial filtering is an important mechanism to improve the spatial quality of laser beams. Typically, a confocal arrangement of lenses with a diaphragm in the focal plane is used for intracavity spatial filtering. Such conventional filtering requires access to the far-field domain. In microlasers, however, conventional filtering is impossible due to the lack of space in micro-resonators to access the far-field. Therefore, a novel concept for more compact and efficient spatial filtering is necessary. In this study, we propose and demonstrate a conceptually novel mechanism of spatial filtering in the near-field domain, by a nanostructured multilayer coating - a 2D photonic crystal structure with a periodic index modulation along the longitudinal and transverse direction to the beam propagation. The structure is built on a nano-modulated substrate, to provide the transverse periodicity. The physical vapor deposition is used to provide self-repeating modulation in the longitudinal direction. We experimentally demonstrate a 5 micron thick photonic multilayer structure composed of nanostructured multiple layers of alternating high- and low-index materials providing spatial filtering in the near-infrared frequencies with 2° low angle passband. The proposed photonic structure can be considered as an ideal component for intracavity spatial filtering in microlasers.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Tilted black-Si: ~0.45 form-birefringence from sub-wavelength needles
Authors:
Darius Gailevicius,
Meguya Ryu,
Reo Honda,
Stefan Lundgaard,
Tai Suzuki,
Jovan Maksimovic,
**gwen Hu,
Denver P. Linklater,
Elena P. Ivanova,
Tomas Katkus,
Vijayakumar Anand,
Mangirdas Malinauskas,
Yoshiaki Nishijima,
Mangirdas Malinauskas,
Vijayakumar Anand,
Soon Hock Ng,
Kestutis Staliunas,
Junko Morikawa,
Saulius Juodkazis
Abstract:
The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of $θ_i < 50 - 70^\circ$ (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15~min etching was $d\sim 200$ nm and had a 100 $μ$m w…
▽ More
The self-organised conical needles produced by plasma etching of silicon (Si), known as black silicon (b-Si), create a form-birefringent surface texture when etching of Si orientated at angles of $θ_i < 50 - 70^\circ$ (angle between the Si surface and vertical plasma E-field). The height of the needles in the form-birefringent region following 15~min etching was $d\sim 200$ nm and had a 100 $μ$m width of the optical retardance/birefringence, characterised using polariscopy. The height of the b-Si needles corresponds closely to the skin-depth of Si $\simλ/4$ for the visible spectral range. Reflection-type polariscope with a voltage-controlled liquid-crystal retarder is proposed to directly measure the retardance $Δn\times d/λ\approx 0.15$ of the region with tilted b-Si needles. The quantified form birefringence of $Δn = - 0.45$ over $λ= 400-700$~nm spectral window was obtained. Such high values of $Δn$ at visible wavelengths can only be observed in the most birefringence calcite or barium borate as well as in liquid crystals. The replication of b-Si into Ni-shim with high fidelity was also demonstrated and can be used for imprinting of the b-Si nanopattern into other materials.
△ Less
Submitted 31 March, 2020;
originally announced April 2020.
-
Photonic Crystal Spatial Filters Fabricated by Femtosecond Pulsed Bessel Beam
Authors:
Darius Gailevičius,
Vytautas Purlys,
Kestutis Staliunas
Abstract:
We propose and experimentally demonstrate femtosecond direct laser writing with Bessel beams for the fabrication of photonic crystals with spatial filtering functionality. Such filters are mechanically stable, of small (of order of millimeter) size, do not require direct access to the far-field domain, and therefore are excellent candidates for intracavity spatial filtering applications in mini- a…
▽ More
We propose and experimentally demonstrate femtosecond direct laser writing with Bessel beams for the fabrication of photonic crystals with spatial filtering functionality. Such filters are mechanically stable, of small (of order of millimeter) size, do not require direct access to the far-field domain, and therefore are excellent candidates for intracavity spatial filtering applications in mini- and micro-lasers. The technique allows the fabrication of efficient photonic crystal spatial filters in glass, with a narrow angle (~1 degree) nearly 100%-transmission pass-band between broad angle (up to 10 degrees) nearly 0%-transmission angular stop-bands. We show, that this technique can not only significantly shorten the fabrication time, but also allows the fabrication of large-scale defect-free photonic crystal spatial filters with a wide filtering band.
△ Less
Submitted 7 August, 2019;
originally announced August 2019.
-
Photonic crystal spatial filtering in broad aperture diode laser
Authors:
Sandeep Gawali,
Darius Gailevičius,
Guillermo Gerre-Werner,
Vytautas Purlys,
Crina Cojocaru,
Jose Trull,
Joan Montiel-Ponsoda,
Kestutis Staliunas
Abstract:
Broad aperture semiconductor lasers usually suffer from low spatial quality of the emitted beams. Due to the highly compact character of such lasers the use of a conventional intra-cavity spatial filters is problematic. We demonstrate that extremely compact Photonic Crystal spatial filters, incorporated into the laser resonator, can improve the beam spatial quality, and correspondingly, increase t…
▽ More
Broad aperture semiconductor lasers usually suffer from low spatial quality of the emitted beams. Due to the highly compact character of such lasers the use of a conventional intra-cavity spatial filters is problematic. We demonstrate that extremely compact Photonic Crystal spatial filters, incorporated into the laser resonator, can improve the beam spatial quality, and correspondingly, increase the brightness of the emitted radiation. We report the decrease of the M2 from 47 down to 28 due to Photonic Crystal spatial intra-cavity filtering, and the increase of the brightness by a factor of 1.5, giving a proof of principle of intra-cavity Photonic Crystal spatial filtering in broad area semiconductor lasers.
△ Less
Submitted 30 July, 2019; v1 submitted 12 June, 2019;
originally announced June 2019.
-
Nanoscale precision of 3D polymerisation via polarisation control
Authors:
Sima Rekstyte,
Tomas Jonavicius,
Darius Gailevicius,
Mangirdas Malinauskas,
Vygantas Mizeikis,
Eugene G. Gamaly,
Saulius Juodkazis
Abstract:
A systematic analysis of polarization effects in a direct write femtosecond laser 3D lithography is presented. It is newly shown that coupling between linear polarization of the writing light electric field and temperature gradient can be used to fine-tune feature sizes in structuring of photoresists at a nanoscale. The vectorial Debye focusing is used to simulate polarization effects and a contro…
▽ More
A systematic analysis of polarization effects in a direct write femtosecond laser 3D lithography is presented. It is newly shown that coupling between linear polarization of the writing light electric field and temperature gradient can be used to fine-tune feature sizes in structuring of photoresists at a nanoscale. The vectorial Debye focusing is used to simulate polarization effects and a controlled variation up to 20% in the linewidth is shown experimentally for the identical axial extent of the polymerised features. The revealed mechanisms are relevant for a wide range of phenomena of light-matter interaction at tight focusing in laser-tweezers and in plasmonic or dielectric sub-wavelength focusing where strong light intensity and thermal gradients coexist.
△ Less
Submitted 22 March, 2016;
originally announced March 2016.