-
How well can VMEC predict the initial saturation of external kink modes in near circular tokamaks and $l=2$ stellarators?
Authors:
Rohan Ramasamy,
Matthias Hoelzl,
Sophia Henneberg,
Erika Strumberger,
Karl Lackner,
Sibylle Günter
Abstract:
The equilibrium code, VMEC, is used to study external kinks in low $β$ tokamaks and $l=2$ stellarators. The applicability of the code when modelling nonlinear MHD effects is explored in an attempt to understand and predict how the initial saturation of the MHD mode depends on the external rotational transform. It is shown that helicity preserving, free boundary VMEC computations do not converge to…
▽ More
The equilibrium code, VMEC, is used to study external kinks in low $β$ tokamaks and $l=2$ stellarators. The applicability of the code when modelling nonlinear MHD effects is explored in an attempt to understand and predict how the initial saturation of the MHD mode depends on the external rotational transform. It is shown that helicity preserving, free boundary VMEC computations do not converge to a single perturbed solution with increasing spectral resolution. Additional constraints are therefore applied to narrow down the numerical resolution parameters appropriate for physical scans. The dependence of the modelled (4, 1) kink mode on the external rotational transform and field periodicity is then studied. While saturated states can be identified which decrease in amplitude with increasing external rotational transform, bifurcated states are found that contradict this trend. It was therefore not possible to use VMEC alone to identify the physical dependency of the nonlinear mode amplitude on the magnetic geometry. The accuracy of the VMEC solutions is nevertheless demonstrated by showing that the expected toroidal mode coupling is captured in the magnetic energy spectrum for stellarator cases. Comparing with the initial value code, JOREK, the predicted redistribution of poloidal magnetic energy from the vacuum to plasma region in VMEC is shown to be physical. This work is a first step towards using VMEC to study MHD modes in stellarator geometry.
△ Less
Submitted 28 May, 2023; v1 submitted 26 February, 2023;
originally announced February 2023.
-
Probing non-linear MHD stability of the EDA H-mode in ASDEX Upgrade
Authors:
A Cathey,
M Hoelzl,
L Gil,
MG Dunne,
GF Harrer,
GTA Huijsmans,
J Kalis,
K Lackner,
SJP Pamela,
E Wolfrum,
S Günter,
the JOREK team,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non…
▽ More
Regimes of operation in tokamaks that are devoid of large ELMs have to be better understood to extrapolate their applicability to reactor-relevant devices. This paper describes non-linear extended MHD simulations that use an experimental equilibrium from an EDA H-mode in ASDEX Upgrade. Linear ideal MHD analysis indicates that the operational point lies slightly inside of the stable region. The non-linear simulations with the visco-resistive extended MHD code, JOREK, sustain non-axisymmetric perturbations that are linearly most unstable with toroidal mode numbers of n = \{6 \dots 9\}, but non-linearly higher and lower n become driven and the low-n become dominant. The poloidal mode velocity during the linear phase is found to correspond to the expected velocity for resistive ballooning modes. The perturbations that exist in the simulations have somewhat smaller poloidal wavenumbers (k_θ \sim 0.1 to 0.5 cm^{-1} ) than the experimental expectations for the quasi-coherent mode in EDA, and cause non-negligible transport in both the heat and particle channels. In the transition from linear to non-linear phase, the mode frequency chirps down from approximately 35 kHz to 13 kHz, which corresponds approximately to the lower end of frequencies that are typically observed in EDA H-modes in ASDEX Upgrade.
△ Less
Submitted 22 January, 2023;
originally announced January 2023.
-
MHD simulations of formation, sustainment and loss of Quiescent H-mode in the all-tungsten ASDEX Upgrade
Authors:
Lorenz Meier,
Matthias Hoelzl,
Andres Cathey,
Guido Huijsmans,
Eleonora Viezzer,
Mike Dunne,
Jan van Dijk,
Diego José Cruz Zabala,
Karl Lackner,
Sibylle Günter,
ASDEX Upgrade Team,
EUROfusion MST1 Team,
JOREK Team
Abstract:
Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region…
▽ More
Periodic edge localized modes (ELMs) are the non-linear consequences of pressure-gradient-driven ballooning modes and current-driven peeling modes becoming unstable in the pedestal region of high confinement fusion plasmas. In future tokamaks like ITER, large ELMs are foreseen to severely affect the lifetime of wall components as they transiently deposit large amounts of heat onto a narrow region at the divertor targets. Several strategies exist for avoidance, suppression, or mitigation of these instabilities, such as the naturally ELM-free quiescent H-mode (QH-mode). In the present article, an ASDEX Upgrade equilibrium that features a QH-mode is investigated through non-linear extended MHD simulations covering the dynamics over tens of milliseconds. The equilibrium is close to the ideal peeling limit and non-linearly develops saturated modes at the edge of the plasma. A dominant toroidal mode number of $n=1$ is found, for which the characteristic features of the edge harmonic oscillation are recovered. The saturated modes contribute to heat and particle transport preventing pedestal build-up to the ELM triggering threshold. The non-linear dynamics of the mode, in particular its interaction with the evolution of the edge safety factor is studied, which suggest a possible new saturation mechanism for the QH-mode. The simulations show good qualitative and quantitative agreement to experiments in AUG. In particular, the processes leading to the termination of QH-mode above a density threshold is studied, which results in the transition into an ELM regime. In the vicinity of this threshold, limit cycle oscillations are observed.
△ Less
Submitted 12 July, 2023; v1 submitted 18 January, 2023;
originally announced January 2023.
-
Modelling of saturated external MHD instabilities in tokamaks: a comparison of 3D free boundary equilibria and nonlinear stability calculations
Authors:
Rohan Ramasamy,
Guillermo Bustos Ramirez,
Matthias Hoelzl,
Jonathan Graves,
Guillermo Suárez López,
Karl Lackner,
Sibylle Günter,
the JOREK team
Abstract:
3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this inv…
▽ More
3D free boundary equilibrium computations have recently been used to model external kinks and edge harmonic oscillations (EHOs), comparing with linear MHD stability codes, and nonlinear analytic theory [Kleiner et al, PPCF 61 084005 (2019)]. In this study, results of the VMEC equilibrium code are compared further with nonlinear reduced MHD simulations, using the JOREK code. The purpose of this investigation is to understand the extent to which the modelling approaches agree, and identify the important physical effects which can modify the dynamics. For the simulated external kink, which is dominated by a single toroidal harmonic, good agreement is found when a large Lundquist number is used in the JOREK simulation, such that resistive effects are sub-dominant. Modelling EHOs where multiple toroidal harmonics are linearly unstable, the saturated perturbation observed can differ in the dominant toroidal harmonic. On the ideal timescale, a n=2 EHO is observed in JOREK, while the saturated perturbation predicted by VMEC is a n=1 mode. Extending simulations into timescales where resistive effects can play a role, similar n=1 perturbations can be found. The coupling of different linearly unstable toroidal harmonics in the JOREK simulation broadens the magnetic energy spectrum and ergodises the plasma edge region, resulting in a more localised pressure perturbation. These effects are not observed in VMEC, because closed magnetic flux surfaces are enforced. Despite the sensitivity of JOREK results on the assumed resistivity, saturated states can be found using both approaches that are in reasonable agreement, even for this more advanced case.
△ Less
Submitted 3 June, 2022; v1 submitted 9 March, 2022;
originally announced March 2022.
-
JOREK3D: An extension of the JOREK nonlinear MHD code to stellarators
Authors:
Nikita Nikulsin,
Rohan Ramasamy,
Matthias Hoelzl,
Florian Hindenlang,
Erika Strumberger,
Karl Lackner,
Sibylle Günter
Abstract:
Although the basic concept of a stellarator was known since the early days of fusion research, advances in computational technology have enabled the modelling of increasingly complicated devices, leading up to the construction of Wendelstein 7-X, which has recently shown promising results. This recent success has revived interest in the nonlinear 3D MHD modelling of stellarators in order to better…
▽ More
Although the basic concept of a stellarator was known since the early days of fusion research, advances in computational technology have enabled the modelling of increasingly complicated devices, leading up to the construction of Wendelstein 7-X, which has recently shown promising results. This recent success has revived interest in the nonlinear 3D MHD modelling of stellarators in order to better understand their performance and operational limits. This paper reports on the extension of the JOREK code to 3D geometries and on the first stellarator simulations carried out with it. The first simple simulations shown here address the classic Wendelstein 7-A stellarator using a reduced MHD model previously derived by us. The results demonstrate that stable full MHD equilibria are preserved in the reduced model: the flux surfaces do not move throughout the simulation, and closely match the flux surfaces of the full MHD equilibrium. Further, both tearing and ballooning modes were simulated, and the linear growth rates measured in JOREK are in reasonable agreement with the growth rates from the CASTOR3D linear MHD code.
△ Less
Submitted 12 May, 2022; v1 submitted 28 January, 2022;
originally announced January 2022.
-
MHD simulations of small ELMs at low triangularity in ASDEX Upgrade
Authors:
A. Cathey,
M. Hoelzl,
G. Harrer,
M. G. Dunne,
G. T. A. Huijsmans,
K. Lackner,
S. J. P. Pamela,
E. Wolfrum,
S. Günter,
the JOREK team,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualita…
▽ More
The development of small- and no-ELM regimes for ITER is a high priority topic due to the risks associated to type-I ELMs. By considering non-linear extended MHD simulations of the ASDEX Upgrade tokamak with the JOREK code, we probe a regime that avoids type-I ELMs completely provided that the separatrix density is high enough. The dynamics of the pedestal in this regime are observed to be qualitatively similar to the so-called quasi-continuous exhaust (QCE) regime in several ways. Repetitive type-I ELMs are substituted by roughly constant levels of outwards transport caused by peeling-ballooning modes (with dominant ballooning characteristics) which are localised in the last 5\% of the confined region (in normalised poloidal flux). The simulated low triangularity plasma transitions to a type-I ELMy H-mode if the separatrix density is sufficiently reduced or if the input heating power is sufficiently increased. The stabilising factors that play a role in the suppression of the small ELMs are also investigated by analysing the simulations, and the importance of including diamagnetic effects in the simulations is highlighted. By considering a scan in the pedestal resistivity and by measuring the poloidal velocity of the modes (and comparing to theoretical estimates for ideal and resistive modes), we identify the underlying instabilities as resistive peeling-ballooning modes. Decreasing the resistivity below experimentally-relevant conditions (i.e., going towards ideal MHD), the peeling-ballooning modes that constrain the pedestal below the type-I ELM stability boundary display sharply decreasing growth rates.
△ Less
Submitted 15 October, 2021;
originally announced October 2021.
-
Comparing spontaneous and pellet-triggered ELMs via non-linear extended MHD simulations
Authors:
A. Cathey,
M. Hoelzl,
S. Futatani,
P. T. Lang,
K. Lackner,
G. T. A. Huijsmans,
S. J. P. Pamela,
S. Günter,
the JOREK team,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-tri…
▽ More
Injecting frozen deuterium pellets into an ELMy H-mode plasma is a well established scheme for triggering edge localized modes (ELMs) before they naturally occur. Based on an ASDEX Upgrade H-mode plasma, this article presents a comparison of extended MHD simulations of spontaneous type-I ELMs and pellet-triggered ELMs allowing to study their non-linear dynamics in detail. In particular, pellet-triggered ELMs are simulated by injecting deuterium pellets into different time points during the pedestal build-up described in [A. Cathey et al. Nuclear Fusion 60, 124007 (2020)]. Realistic ExB and diamagnetic background plasma flows as well as the time dependent bootstrap current evolution are included during the build-up to capture the balance between stabilising and destabilising terms for the edge instabilities accurately. Dependencies on the pellet size and injection times are studied. The spatio-temporal structures of the modes and the resulting divertor heat fluxes are compared in detail between spontaneous and triggered ELMs. We observe that the premature excitation of ELMs by means of pellet injection is caused by a helical perturbation described by a toroidal mode number of n = 1. In accordance with experimental observations, the pellet-triggered ELMs show reduced thermal energy losses and narrower divertor wetted area with respect to spontaneous ELMs. The peak divertor energy fluency is seen to decrease when ELMs are triggered by pellets injected earlier during the pedestal build-up.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Nonlinear MHD simulations of external kinks in quasi-axisymmetric stellarators using an axisymmetric external rotational transform approximation
Authors:
Rohan Ramasamy,
Matthias Hoelzl,
Erika Strumberger,
Karl Lackner,
Sibylle Günter
Abstract:
Reduced magnetohydrodynamic (MHD) equations are used to study the nonlinear dynamics of external kinks in a quasi-axisymmetric (QA) stellarator with varying fractions of external rotational transform. The large bootstrap currents associated with high beta plasmas may make QA configurations susceptible to low n external modes, limiting their operational space. The violence of the nonlinear dynamics…
▽ More
Reduced magnetohydrodynamic (MHD) equations are used to study the nonlinear dynamics of external kinks in a quasi-axisymmetric (QA) stellarator with varying fractions of external rotational transform. The large bootstrap currents associated with high beta plasmas may make QA configurations susceptible to low n external modes, limiting their operational space. The violence of the nonlinear dynamics, and, in particular, when these modes lead to a disruption, is not yet understood. In this paper, the nonlinear phase of external kinks in an unstable QA configuration with an edge safety factor below two is simulated. An axisymmetric approximation of this stellarator is constructed in the nonlinear MHD code, JOREK, capturing the influence of the external rotational transform. The use of this approximation for the considered stellarator is validated by comparing the linear dynamics against the linear viscoresistive MHD code, CASTOR3D. The nonlinear dynamics of this stellarator approximation are compared with an equivalent tokamak to understand the influence of a relatively small external rotational transform. While the external rotational transform does have a stabilising influence on the MHD activity, it remains violent. To explore the first order influence of a larger external rotational transform, this equilibrium parameter is artificially increased for the considered stellarator, reducing the effective plasma current. The violence of the kink instability is quantified, and shown to reduce with the increasing external rotational transform. At the same time, the external kink triggers internal modes that exacerbate the loss in confinement during the nonlinear phase, such that it remains large over much of the parameter space. It is only with a significant fraction of external rotational transform that these subsequent modes are stabilised.
△ Less
Submitted 2 May, 2021; v1 submitted 5 February, 2021;
originally announced February 2021.
-
Bounds on point configurations determined by distances and dot products
Authors:
Slade Gunter,
Eyvi Palsson,
Ben Rhodes,
Steven Senger
Abstract:
We study a family of variants of Erd\H os' unit distance problem, concerning distances and dot products between pairs of points chosen from a large finite point set. Specifically, given a large finite set of $n$ points $E$, we look for bounds on how many subsets of $k$ points satisfy a set of relationships between point pairs based on distances or dot products. We survey some of the recent work in…
▽ More
We study a family of variants of Erd\H os' unit distance problem, concerning distances and dot products between pairs of points chosen from a large finite point set. Specifically, given a large finite set of $n$ points $E$, we look for bounds on how many subsets of $k$ points satisfy a set of relationships between point pairs based on distances or dot products. We survey some of the recent work in the area and present several new, more general families of bounds.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Testing of the new JOREK stellarator-capable model in the tokamak limit
Authors:
Nikita Nikulsin,
Matthias Hoelzl,
Alessandro Zocco,
Karl Lackner,
Sibylle Guenter
Abstract:
In preparation for extending the JOREK nonlinear MHD code to stellarators, a hierarchy of stellarator-capable reduced and full MHD models has been derived and tested. The derivation was presented at the EFTC 2019 conference. Continuing this line of work, we have implemented the reduced MHD model (arXiv:1907.12486) as well as an alternative model which was newly derived using a different set of pro…
▽ More
In preparation for extending the JOREK nonlinear MHD code to stellarators, a hierarchy of stellarator-capable reduced and full MHD models has been derived and tested. The derivation was presented at the EFTC 2019 conference. Continuing this line of work, we have implemented the reduced MHD model (arXiv:1907.12486) as well as an alternative model which was newly derived using a different set of projection operators for obtaining the scalar momentum equations from the full MHD vector momentum equation. With the new operators, the reduced model matches the standard JOREK reduced models for tokamaks in the tokamak limit and conserves energy exactly, while momentum conservation is less accurate than in the original model whenever field-aligned flow is present.
△ Less
Submitted 30 March, 2021; v1 submitted 27 November, 2020;
originally announced November 2020.
-
Non-linear extended MHD simulations of type-I edge localised mode cycles in ASDEX Upgrade and their underlying triggering mechanism
Authors:
Andres Cathey,
M. Hoelzl,
K. Lackner,
G. T. A. Huijsmans,
M. G. Dunne,
E. Wolfrum,
S. J. P. Pamela,
F. Orain,
S. Günter,
the JOREK team,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear inter…
▽ More
A triggering mechanism responsible for the explosive onset of edge localised modes (ELMs) in fusion plasmas is identified by performing, for the first time, non-linear magnetohydrodynamic simulations of repetitive type-I ELMs. Briefly prior to the ELM crash, destabilising and stabilising terms are affected at different timescales by an increasingly ergodic magnetic field caused by non-linear interactions between the axisymmetric background plasma and growing non-axisymmetric perturbations. The separation of timescales prompts the explosive, i.e. faster than exponential, growth of an ELM crash which lasts ${\sim}$ 500 $μ$s. The duration and size of the simulated ELM crashes compare qualitatively well with type-I ELMs in ASDEX Upgrade. As expected for type-I ELMs, a direct proportionality between the heating power in the simulations and the ELM repetition frequency is obtained. The simulations presented here are a major step forward towards predictive modelling of ELMs and of the assessment of mitigation techniques in ITER and other future tokamaks.
△ Less
Submitted 26 October, 2020; v1 submitted 20 July, 2020;
originally announced July 2020.
-
A three-dimensional reduced MHD model consistent with full MHD
Authors:
Nikita Nikulsin,
Matthias Hoelzl,
Alessandro Zocco,
Karl Lackner,
Sibylle Günter
Abstract:
Within the context of a viscoresistive magnetohydrodynamic (MHD) model with anisotropic heat transport and cross-field mass diffusion, we introduce novel three-term representations for the magnetic field (background vacuum field, field line bending and field compression) and velocity ($\vec E\times\vec B$ flow, field-aligned flow and fluid compression), which are amenable to three-dimensional trea…
▽ More
Within the context of a viscoresistive magnetohydrodynamic (MHD) model with anisotropic heat transport and cross-field mass diffusion, we introduce novel three-term representations for the magnetic field (background vacuum field, field line bending and field compression) and velocity ($\vec E\times\vec B$ flow, field-aligned flow and fluid compression), which are amenable to three-dimensional treatment. Once the representations are inserted into the MHD equations, appropriate projection operators are applied to Faraday's law and the Navier-Stokes equation to obtain a system of scalar equations that is closed by the continuity and energy equations. If the background vacuum field is sufficiently strong and the $β$ is low, MHD waves are approximately separated by the three terms in the velocity representation, with each term containing a specific wave. Thus, by setting the appropriate term to zero, we eliminate fast magnetosonic waves, obtaining a reduced MHD model. We also show that the other two velocity terms do not compress the magnetic field, which allows us to set the field compression term to zero within the same reduced model. Drop** also the field-aligned flow, a further simplified model is obtained, leading to a fully consistent hierarchy of reduced and full MHD models for 3D plasma configurations. Finally, we discuss the conservation properties and derive the conditions under which the reduction approximation is valid. We also show that by using an ordering approach, reduced MHD equations similar to what we got from the ansatz approach can be obtained by means of a physics-based asymptotic expansion.
△ Less
Submitted 14 October, 2019; v1 submitted 29 July, 2019;
originally announced July 2019.
-
Numerical study of tearing mode seeding in tokamak X-point plasma
Authors:
Dmytro Meshcheriakov,
Matthias Hoelzl,
Valentin Igochine,
Sina Fietz,
Francois Orain,
Guido T. A. Huijsmans,
Marc Maraschek,
Mike Dunne,
Rachael McDermott,
Hartmut Zohm,
Karl Lackner,
Sibylle Guenter,
ASDEX Upgrade Team,
EUROfusion MST1 Team
Abstract:
A detailed understanding of island seeding is crucial to avoid (N)TMs and their negative consequences like confinement degradation and disruptions. In the present work, we investigate the growth of 2/1 islands in response to magnetic perturbations. Although we use externally applied perturbations produced by resonant magnetic perturbation (RMP) coils for this study, results are directly transferab…
▽ More
A detailed understanding of island seeding is crucial to avoid (N)TMs and their negative consequences like confinement degradation and disruptions. In the present work, we investigate the growth of 2/1 islands in response to magnetic perturbations. Although we use externally applied perturbations produced by resonant magnetic perturbation (RMP) coils for this study, results are directly transferable to island seeding by other MHD instabilities creating a resonant magnetic field component at the rational surface. Experimental results for 2/1 island penetration from ASDEX Upgrade are presented extending previous studies. Simulations are based on an ASDEX Upgrade L-mode discharge with low collisionality and active RMP coils. Our numerical studies are performed with the 3D, two fluid, non-linear MHD code JOREK. All three phases of mode seeding observed in the experiment are also seen in the simulations: first a weak response phase characterized by large perpendicular electron flow velocities followed by a fast growth of the magnetic island size accompanied by a reduction of the perpendicular electron velocity, and finally the saturation to a fully formed island state with perpendicular electron velocity close to zero. Thresholds for mode penetration are observed in the plasma rotation as well as in the RMP coil current. A hysteresis of the island size and electron perpendicular velocity is observed between the ram** up and down of the RMP amplitude consistent with an analytically predicted bifurcation. The transition from dominant kink/bending to tearing parity during the penetration is investigated.
△ Less
Submitted 16 April, 2019;
originally announced April 2019.
-
Non-linear modeling of the threshold between ELM mitigation and ELM suppression by Resonant Magnetic Perturbations in ASDEX Upgrade
Authors:
François Orain,
M. Hoelzl,
F. Mink,
M. Willensdorfer,
M. Bécoulet,
M. Dunne,
S. Günter,
G. T. A. Huijsmans,
K. Lackner,
S. Pamela,
W. Suttrop,
E. Viezzer
Abstract:
The interaction between Edge Localized Modes (ELMs) and Resonant Magnetic Perturbations (RMPs) is modeled with the magnetohydrodynamic code JOREK using experimental parameters from ASDEX Upgrade discharges. The ELM mitigation or suppression is optimal when the amplification of both tearing and peeling-kink responses result in a better RMP penetration. The ELM mitigation or suppression is not only…
▽ More
The interaction between Edge Localized Modes (ELMs) and Resonant Magnetic Perturbations (RMPs) is modeled with the magnetohydrodynamic code JOREK using experimental parameters from ASDEX Upgrade discharges. The ELM mitigation or suppression is optimal when the amplification of both tearing and peeling-kink responses result in a better RMP penetration. The ELM mitigation or suppression is not only due to the reduction of the pressure gradient, but predominantly arises from the toroidal coupling between the ELMs and the RMP-induced mode at the plasma edge, forcing the edge modes to saturate at a low level. The bifurcation from ELM mitigation to ELM suppression is observed when the RMP amplitude is increased. ELM mitigation is characterized by rotating modes at the edge, while the mode locking to RMPs is induced by the resonant braking of the electron perpendicular flow in the ELM suppression regime.
△ Less
Submitted 3 June, 2019; v1 submitted 1 February, 2019;
originally announced February 2019.
-
Magnetic flux pum** in 3D nonlinear magnetohydrodynamic simulations
Authors:
I. Krebs,
S. C. Jardin,
S. Günter,
K. Lackner,
M. Hoelzl,
E. Strumberger,
N. Ferraro
Abstract:
A self-regulating magnetic flux pum** mechanism in tokamaks that maintains the core safety factor at $q\approx 1$, thus preventing sawteeth, is analyzed in nonlinear 3D magnetohydrodynamic simulations using the M3D-C$^1$ code. In these simulations, the most important mechanism responsible for the flux pum** is that a saturated $(m=1,n=1)$ quasi-interchange instability generates an effective ne…
▽ More
A self-regulating magnetic flux pum** mechanism in tokamaks that maintains the core safety factor at $q\approx 1$, thus preventing sawteeth, is analyzed in nonlinear 3D magnetohydrodynamic simulations using the M3D-C$^1$ code. In these simulations, the most important mechanism responsible for the flux pum** is that a saturated $(m=1,n=1)$ quasi-interchange instability generates an effective negative loop voltage in the plasma center via a dynamo effect. It is shown that sawtoothing is prevented in the simulations if $β$ is sufficiently high to provide the necessary drive for the $(m=1,n=1)$ instability that generates the dynamo loop voltage. The necessary amount of dynamo loop voltage is determined by the tendency of the current density profile to centrally peak which, in our simulations, is controlled by the peakedness of the applied heat source profile.
△ Less
Submitted 20 June, 2017;
originally announced June 2017.
-
Non-linear modeling of the plasma response to RMPs in ASDEX Upgrade
Authors:
F. Orain,
M. Hoelzl,
E. Viezzer,
M. Dunne,
M. Becoulet,
P. Cahyna,
G. T. A. Huijsmans,
J. Morales,
M. Willensdorfer,
W. Suttrop,
A. Kirk,
S. Pamela,
E. Strumberger,
S. Guenter,
A. Lessig,
the ASDEX Upgrade Team,
the EUROfusion MST1 Team
Abstract:
The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge…
▽ More
The plasma response to Resonant Magnetic Perturbations (RMPs) in ASDEX Upgrade is modeled with the non-linear resistive MHD code JOREK, using input profiles that match those of the experiments as closely as possible. The RMP configuration for which Edge Localized Modes are best mitigated in experiments is related to the largest edge kink response observed near the X-point in modeling. On the edge resonant surfaces $q = m/n$, the coupling between the m + 2 kink component and the m resonant component is found to induce the amplification of the resonant magnetic perturbation. The ergodicity and the 3D-displacement near the X-point induced by the resonant amplification can only partly explain the density pumpout observed in experiments.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Multi-mode Alfvénic Fast Particle Transport and Losses: Numerical vs. Experimental Observation
Authors:
Mirjam Schneller,
Philipp Lauber,
Roberto Bilato,
Manuel García-Muñoz,
Michael Brüdgam,
Sibylle Günter,
the ASDEX Upgrade Team
Abstract:
In many discharges at ASDEX Upgrade fast particle losses can be observed due to Alfvénic gap modes, Reversed Shear Alfvén Eigenmodes or core-localized Beta Alfvén Eigenmodes. For the first time, simulations of experimental conditions in the ASDEX Upgrade fusion device are performed for different plasma equilibria (particularly for different, also non-monotonic q profiles). The numerical tool is th…
▽ More
In many discharges at ASDEX Upgrade fast particle losses can be observed due to Alfvénic gap modes, Reversed Shear Alfvén Eigenmodes or core-localized Beta Alfvén Eigenmodes. For the first time, simulations of experimental conditions in the ASDEX Upgrade fusion device are performed for different plasma equilibria (particularly for different, also non-monotonic q profiles). The numerical tool is the extended version of the HAGIS code [Pinches'98, Brüdgam PhD Thesis, 2010], which also computes the particle motion in the vacuum region between vessel wall in addition to the internal plasma volume. For this work, a consistent fast particle distribution function was implemented to represent the strongly anisotropic fast particle population as generated by ICRH minority heating. Furthermore, HAGIS was extended to use more realistic eigenfunctions, calculated by the gyrokinetic eigenvalue solver LIGKA [Lauber'07]. The main aim of these simulations is to allow fast ion loss measurements to be interpreted with a theoretical basis. Fast particle losses are modeled and directly compared with experimental measurements [García-Muñoz'10]. The phase space distribution and the mode-correlation signature of the fast particle losses allows them to be characterized as prompt, resonant or diffusive (non-resonant). The experimental findings are reproduced numerically. It is found that a large number of diffuse losses occur in the lower energy range (at around 1/3 of the birth energy) particularly in multiple mode scenarios (with different mode frequencies), due to a phase space overlap of resonances leading to a so-called domino [Berk'95] transport process. In inverted q profile equilibria, the combination of radially extended global modes and large particle orbits leads to losses with energies down to 1/10th of the birth energy.
△ Less
Submitted 11 November, 2013;
originally announced November 2013.
-
Nonlinear excitation of low-n harmonics in reduced magnetohydrodynamic simulations of edge-localized modes
Authors:
Isabel Krebs,
Matthias Hoelzl,
Karl Lackner,
Sibylle Guenter
Abstract:
Nonlinear simulations of the early ELM phase based on a typical type-I ELMy ASDEX Upgrade discharge have been carried out using the reduced MHD code JOREK. The analysis is focused on the evolution of the toroidal Fourier spectrum. It is found that during the nonlinear evolution, linearly subdominant low-n Fourier components, in particular the n = 1, grow to energies comparable with linearly domina…
▽ More
Nonlinear simulations of the early ELM phase based on a typical type-I ELMy ASDEX Upgrade discharge have been carried out using the reduced MHD code JOREK. The analysis is focused on the evolution of the toroidal Fourier spectrum. It is found that during the nonlinear evolution, linearly subdominant low-n Fourier components, in particular the n = 1, grow to energies comparable with linearly dominant harmonics. A simple model is developed, based on the idea that energy is transferred among the toroidal harmonics via second order nonlinear interaction. The simple model reproduces and explains very well the early nonlinear evolution of the toroidal spectrum in the JOREK simulations. Furthermore, it is shown for the n = 1 harmonic, that its spatial structure changes significantly during the transition from linear to nonlinearly driven growth. The rigidly growing structure of the linearly barely unstable n = 1 reaches far into the plasma core. In contrast, the nonlinearly driven n = 1 has a rigidly growing structure localized at the plasma edge, where the dominant toroidal harmonics driving the n = 1 are maximal and in phase. The presented quadratic coupling model might explain the recent experimental observation of strong low-n components in magnetic measurements [Wenninger et al., Non-linear magnetic perturbations during edge localized modes in TCV dominated by low n mode components, submitted to Nuclear Fusion].
△ Less
Submitted 16 August, 2013; v1 submitted 16 May, 2013;
originally announced May 2013.
-
Nonlinear alfvénic fast particle transport and losses
Authors:
Mirjam Schneller,
Philipp Lauber,
Manuel García-Muñoz,
Michael Brüdgam,
Sibylle Günter
Abstract:
Magnetohydrodynamic instabilities like Toroidal Alfvén Eigenmodes or core-localized modes such as Beta Induced Alfvén Eigenmodes and Reversed Shear Alfvén Eigenmodes driven by fast particles can lead to significant redistribution and losses in fusion devices. This is observed in many ASDEX Upgrade discharges. The present work aims to understand the underlying resonance mechanisms, especially in th…
▽ More
Magnetohydrodynamic instabilities like Toroidal Alfvén Eigenmodes or core-localized modes such as Beta Induced Alfvén Eigenmodes and Reversed Shear Alfvén Eigenmodes driven by fast particles can lead to significant redistribution and losses in fusion devices. This is observed in many ASDEX Upgrade discharges. The present work aims to understand the underlying resonance mechanisms, especially in the presence of multiple modes with different frequencies. Resonant mode coupling mechanisms are investigated using the drift kinetic HAGIS code [Pinches 1998]. Simulations were performed for different plasma equilibria, in particular for different q profiles, employing the availability of improved experimental data. A study was carried out, investigating double-resonant mode coupling with respect to various overlap** scenarios. It was found that, depending on the radial mode distance, double-resonance is able to enhance growth rates as well as mode amplitudes significantly. Small radial mode distances, however can also lead to strong nonlinear mode stabilization of a linear dominant mode. With the extended version of HAGIS, losses were simulated and directly compared with experimental loss measurements. The losses' phase space distribution as well as their ejection signal is consistent with experimental data. Furthermore, it allowed to characterize them as prompt, resonant or stochastic. It was found that especially in multiple mode scenarios (with different mode frequencies), abundant incoherent losses occur in the lower energy range, due to a broad phase-space stochastization. The incoherent higher energetic losses are "prompt", i.e. their initial energy is too large for confined orbits.
△ Less
Submitted 16 November, 2012;
originally announced November 2012.
-
Double-resonant fast particle-wave interaction
Authors:
Mirjam Schneller,
Philipp Lauber,
Michael Brüdgam,
Simon David Pinches,
Sibylle Günter
Abstract:
In future fusion devices fast particles must be well confined in order to transfer their energy to the background plasma. Magnetohydrodynamic instabilities like Toroidal Alfvén Eigenmodes or core-localized modes such as Beta Induced Alfvén Eigenmodes and Reversed Shear Alfvén Eigenmodes, both driven by fast particles, can lead to significant losses. This is observed in many ASDEX Upgrade discharge…
▽ More
In future fusion devices fast particles must be well confined in order to transfer their energy to the background plasma. Magnetohydrodynamic instabilities like Toroidal Alfvén Eigenmodes or core-localized modes such as Beta Induced Alfvén Eigenmodes and Reversed Shear Alfvén Eigenmodes, both driven by fast particles, can lead to significant losses. This is observed in many ASDEX Upgrade discharges. The present study applies the drift-kinetic HAGIS code with the aim of understanding the underlying resonance mechanisms, especially in the presence of multiple modes with different frequencies. Of particular interest is the resonant interaction of particles simultaneously with two different modes, referred to as 'double-resonance'. Various mode overlap** scenarios with different q profiles are considered. It is found that, depending on the radial mode distance, double-resonance is able to enhance growth rates as well as mode amplitudes significantly. Surprisingly, no radial mode overlap is necessary for this effect. Quite the contrary is found: small radial mode distances can lead to strong nonlinear mode stabilization of a linearly dominant mode.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Coupling JOREK and STARWALL for Non-linear Resistive-wall Simulations
Authors:
M. Hoelzl,
P. Merkel,
G. T. A. Huysmans,
E. Nardon,
E. Strumberger,
R. McAdams,
I. Chapman,
S. Guenter,
K. Lackner
Abstract:
The implementation of a resistive-wall extension to the non-linear MHD-code JOREK via a coupling to the vacuum-field code STARWALL is presented along with first applications and benchmark results. Also, non-linear saturation in the presence of a resistive wall is demonstrated. After completion of the ongoing verification process, this code extension will allow to perform non-linear simulations of…
▽ More
The implementation of a resistive-wall extension to the non-linear MHD-code JOREK via a coupling to the vacuum-field code STARWALL is presented along with first applications and benchmark results. Also, non-linear saturation in the presence of a resistive wall is demonstrated. After completion of the ongoing verification process, this code extension will allow to perform non-linear simulations of MHD instabilities in the presence of three-dimensional resistive walls with holes for limited and X-point plasmas.
△ Less
Submitted 4 October, 2012; v1 submitted 13 June, 2012;
originally announced June 2012.
-
Reduced-MHD Simulations of Toroidally and Poloidally Localized ELMs
Authors:
Matthias Hoelzl,
Sibylle Guenter,
Ronald P. Wenninger,
Wolf-Christian Mueller,
Guido T. A. Huysmans,
Karl Lackner,
Isabel Krebs,
the ASDEX Upgrade Team
Abstract:
We use the non-linear reduced-MHD code JOREK to study ELMs in the geometry of the ASDEX Upgrade tokamak. Toroidal mode numbers, poloidal filament sizes, and radial propagation speeds of filaments into the scrape-off layer are in good agreement with observations for type-I ELMs in ASDEX Upgrade. The observed instabilities exhibit a localization of perturbations which is compatible with the "solitar…
▽ More
We use the non-linear reduced-MHD code JOREK to study ELMs in the geometry of the ASDEX Upgrade tokamak. Toroidal mode numbers, poloidal filament sizes, and radial propagation speeds of filaments into the scrape-off layer are in good agreement with observations for type-I ELMs in ASDEX Upgrade. The observed instabilities exhibit a localization of perturbations which is compatible with the "solitary magnetic perturbations" recently discovered in ASDEX Upgrade [R.Wenninger et.al., Solitary Magnetic Perturbations at the ELM Onset, Nucl.Fusion, submitted]. This localization can only be described in numerical simulations with high toroidal resolution.
△ Less
Submitted 23 July, 2012; v1 submitted 27 January, 2012;
originally announced January 2012.
-
A Quasi-Newton Approach to Nonsmooth Convex Optimization Problems in Machine Learning
Authors:
** Yu,
S. V. N. Vishwanathan,
Simon Guenter,
Nicol N. Schraudolph
Abstract:
We extend the well-known BFGS quasi-Newton method and its memory-limited variant LBFGS to the optimization of nonsmooth convex objectives. This is done in a rigorous fashion by generalizing three components of BFGS to subdifferentials: the local quadratic model, the identification of a descent direction, and the Wolfe line search conditions. We prove that under some technical conditions, the res…
▽ More
We extend the well-known BFGS quasi-Newton method and its memory-limited variant LBFGS to the optimization of nonsmooth convex objectives. This is done in a rigorous fashion by generalizing three components of BFGS to subdifferentials: the local quadratic model, the identification of a descent direction, and the Wolfe line search conditions. We prove that under some technical conditions, the resulting subBFGS algorithm is globally convergent in objective function value. We apply its memory-limited variant (subLBFGS) to L_2-regularized risk minimization with the binary hinge loss. To extend our algorithm to the multiclass and multilabel settings, we develop a new, efficient, exact line search algorithm. We prove its worst-case time complexity bounds, and show that our line search can also be used to extend a recently developed bundle method to the multiclass and multilabel settings. We also apply the direction-finding component of our algorithm to L_1-regularized risk minimization with logistic loss. In all these contexts our methods perform comparable to or better than specialized state-of-the-art solvers on a number of publicly available datasets. An open source implementation of our algorithms is freely available.
△ Less
Submitted 22 February, 2010; v1 submitted 24 April, 2008;
originally announced April 2008.
-
Large-mode-number magnetohydrodynamic instability driven by sheared flows in a tokamak plasma with reversed central shear
Authors:
Andreas Bierwage,
Qingquan Yu,
Sibylle Günter
Abstract:
The effect of a narrow sub-Alfvenic shear flow layer near the minimum q_min of the tokamak safety factor profile in a configuration with reversed central shear is analyzed. Sufficiently strong velocity shear gives rise to a broad spectrum of fast growing Kelvin-Helmholtz (KH)-like ideal magnetohydrodynamic (MHD) modes with dominant mode numbers m,n ~ 10. Nonlinear simulations with finite resisti…
▽ More
The effect of a narrow sub-Alfvenic shear flow layer near the minimum q_min of the tokamak safety factor profile in a configuration with reversed central shear is analyzed. Sufficiently strong velocity shear gives rise to a broad spectrum of fast growing Kelvin-Helmholtz (KH)-like ideal magnetohydrodynamic (MHD) modes with dominant mode numbers m,n ~ 10. Nonlinear simulations with finite resistivity show magnetic reconnection near ripples caused by KH-like vortices, the formation of turbulent structures, and a flattening of the flow profile. The KH modes are compared to double tearing modes (DTM) which dominate at lower shearing rates. The possible application of these results in tokamaks with internal transport barrier is discussed.
△ Less
Submitted 11 January, 2007; v1 submitted 24 July, 2006;
originally announced July 2006.