Showing 1–50 of 169 results for author: Fusco, T

Striving towards robust phase diversity on-sky: Implementing LIFT for VLT/MUSE-NFM

Authors: Arseniy Kuznetsov, Sylvain Oberti, Benoit Neichel, Thierry Fusco

Abstract: The recent IRLOS upgrade for VLT/MUSE narrow field mode (NFM) introduced a full-pupil mode to enhance sensitivity and sky coverage. This involved replacing the 2x2 Shack-Hartmann sensor with a single lens for full-aperture photon collection, which also enabled the engagement of the linearized focal-plane technique (LIFT) wavefront sensor instead. However, initial on-sky LIFT experiments have highl… ▽ More The recent IRLOS upgrade for VLT/MUSE narrow field mode (NFM) introduced a full-pupil mode to enhance sensitivity and sky coverage. This involved replacing the 2x2 Shack-Hartmann sensor with a single lens for full-aperture photon collection, which also enabled the engagement of the linearized focal-plane technique (LIFT) wavefront sensor instead. However, initial on-sky LIFT experiments have highlighted a complex point spread function (PSF) structure due to strong and polychromatic non-common path aberrations (NCPAs), complicating the accurate retrieval of tip-tilt and focus using LIFT. This study aims to conduct the first on-sky validation of LIFT on VLT/UT4, outline challenges encountered during the tests, and propose solutions for increasing the robustness of LIFT in on-sky operations. We developed a two-stage approach to focal-plane wavefront sensing, where tip-tilt and focus retrieval done with LIFT is preceded by the NCPA calibration step. The resulting NCPA estimate is subsequently used by LIFT. To perform the calibration, we proposed a method capable of retrieving the information about NCPAs directly from on-sky focal-plane PSFs. We verified the efficacy of this approach in simulated and on-sky tests. Our results demonstrate that adopting the two-stage approach has led to a significant improvement in the accuracy of the defocus estimation performed by LIFT, even under challenging low-flux conditions. The efficacy of LIFT as a slow and truth focus sensor in practical scenarios has been demonstrated. However, integrating NCPA calibration with LIFT is essential to verifying its practical application in the real system. Additionally, the proposed calibration step can serve as an independent and minimally invasive approach to evaluate NCPA on-sky. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Comments: 14 pages, 12 figures. To access the code, see: https://github.com/EjjeSynho/LIFT; https://github.com/EjjeSynho/DIP

Cassiopée, towards technological development for XAO on ELT: the e-APD infrared detector

Authors: Jean-Luc Gach, Piero Bruno, Julien Charton, Philippe Feautrier, Thierry Fusco, Benoit Neichel, Jean-François Sauvage

Abstract: The Cassiopée project aims to develop the key technologies that will be used to deploy very high-performance Adaptive Optics for future ELTs. The ultimate challenge is to detect earth-like planets and characterize the composition of their atmosphere. For this, imaging contrasts of the order of 109 are required, implying a leap forward in adaptive optics performance, with high density deformable mi… ▽ More The Cassiopée project aims to develop the key technologies that will be used to deploy very high-performance Adaptive Optics for future ELTs. The ultimate challenge is to detect earth-like planets and characterize the composition of their atmosphere. For this, imaging contrasts of the order of 109 are required, implying a leap forward in adaptive optics performance, with high density deformable mirrors (120x120 actuators), low-noise cameras and the control of the loop at few kHz. The project brings together 2 industrial partners: First Light Imaging and ALPAO, and 2 academic partners: ONERA and LAM, who will work together to develop a new camera for wavefront sensing, a new deformable mirror and their implementation in an adaptive optics loop. This paper will present the development of the fast large infrared e-APD camera which will be used in the wavefront sensor of the system. The camera will integrate the latest 512x512 Leonardo e-APD array and will benefit from the heritage of the first-light imaging's C-RED One camera. The most important challenges for the application are the autonomous operation, vibration control, background limitation, compactness, acquisition speed and latency. △ Less

Submitted 1 June, 2024; originally announced June 2024.

Comments: arXiv admin note: text overlap with arXiv:2208.00381

Expected performance of the Pyramid wavefront sensor with a laser guide star for 40 m class telescopes

Authors: Francisco Oyarzún, Vincent Chambouleyron, Benoit Neichel, Thierry Fusco, Andrés Guesalaga

Abstract: The use of artificial Laser Guide Stars (LGS) is planned for the new generation of giant segmented mirror telescopes, to extend the sky coverage of their adaptive optics systems. The LGS, being a 3D object at a finite distance will have a large elongation that will affect its use with the Shack-Hartmann (SH) wavefront sensor. In this paper, we compute the expected performance for a Pyramid WaveFro… ▽ More The use of artificial Laser Guide Stars (LGS) is planned for the new generation of giant segmented mirror telescopes, to extend the sky coverage of their adaptive optics systems. The LGS, being a 3D object at a finite distance will have a large elongation that will affect its use with the Shack-Hartmann (SH) wavefront sensor. In this paper, we compute the expected performance for a Pyramid WaveFront Sensor (PWFS) using a LGS for a 40 m telescope affected by photon noise, and also extend the analysis to a flat 2D object as reference. We developed a new way to discretize the LGS, and a new, faster method of propagating the light for any Fourier Filtering wavefront sensors (FFWFS) when using extended objects. We present the use of a sensitivity model to predict the performance of a closed-loop adaptive optic system. We optimized a point source calibrated interaction matrix to accommodate the signal of an extended object, by means of computing optical gains using a convolutional model. We found that the sensitivity drop, given the size of the extended laser source, is large enough to make the system operate in a low-performance regime given the expected return flux of the LGS. The width of the laser beam, rather than the thickness of the sodium layer was identified as the limiting factor. Even an ideal, flat LGS will have a drop in performance due to the flux of the LGS, and small variations in the return flux will result in large variations in performance. We conclude that knife-edge-like wavefront sensors, such as the PWFS, are not recommended for their use with LGS for a 40 m telescope, as they will operate in a low-performance regime, given the size of the extended object. △ Less

Submitted 15 March, 2024; originally announced March 2024.

Strategy for sensing petal mode in presence of AO residual turbulence with pyramid wavefront sensor

Authors: Nicolas Levraud, Vincent Chambouleyron, Jean François Sauvage, Benoit Neichel, Mahawa Cisse, Olivier Fauvarque, Guido Agapito, Cédric Plantet, Anne Laure Cheffot, Enrico Pinna, Simone Esposito2, Thierry Fusco

Abstract: With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is des… ▽ More With the Extremely Large Telescope-generation telescopes come new challenges. The complexity of these telescopes' pupil creates new problems for Adaptive Optics. In particular, the large spiders necessary to support the massive optics of these telescopes create discontinuities in the wavefront measurement. These discontinuities appear as a new phase error dubbed the `petal mode'. This error is described as a differential piston between the fragment of the pupil separated by the spiders and is responsible for reducing the European Extremely Large Telescope's (ELT) resolution to a 15m telescope resolution. The aim of this paper is to study the measurement of the petal mode by adaptive optics sensors. We want to understand why the Pyramid Wavefront Sensor (PyWFS) cannot measure this petal mode under normal conditions and how to allow this measurement by adapting the Adaptive optics control scheme and the PyWFS. To facilitate our study, we consider a simplified version of the petal mode, featuring a simpler pupil than the ELT. We studied specifically how a system that separates the atmospheric turbulence from the petal measurement would behave. The unmodulated PyWFS (uPyWFS) but the uPyWFS does not make accurate measurements in the presence of atmospheric residuals. Studying the petal mode's power spectral density, we propose a filtering step, consisting of a pinhole around the pyramid tip. This reduces the first path residuals seen by the uPyWFS and restores its accuracy. Finally, we demonstrate our proposed system with end-to-end simulations.To address the petal problem, a two-path adaptive optics with a sensor dedicated to the measurement of the petal mode seems necessary. Through this paper, we demonstrate that an uPyWFS can confuse the petal mode with the residuals from the first path. However, adding a spatial filter on top of said uPyWFS makes it a good petalometer candidate. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: 18 pages, 15 figures, Accepted in Astronomy and Astrophysics

Improved prior for adaptive optics point spread function estimation from science images: Application for deconvolution

Authors: A. Lau, R. JL. Fétick, B. Neichel, O. Beltramo-Martin, T. Fusco

Abstract: Access to knowledge of the point spread function (PSF) of adaptive optics(AO)-assisted observations is still a major limitation when processing AO data. This limitation is particularly important when image analysis requires the use of deconvolution methods. As the PSF is a complex and time-varying function, reference PSFs acquired on calibration stars before or after the scientific observation can… ▽ More Access to knowledge of the point spread function (PSF) of adaptive optics(AO)-assisted observations is still a major limitation when processing AO data. This limitation is particularly important when image analysis requires the use of deconvolution methods. As the PSF is a complex and time-varying function, reference PSFs acquired on calibration stars before or after the scientific observation can be too different from the actual PSF of the observation to be used for deconvolution, and lead to artefacts in the final image. We improved the existing PSF-estimation method based on the so-called marginal approach by enhancing the object prior in order to make it more robust and suitable for observations of resolved extended objects. Our process is based on a two-step blind deconvolution approach from the literature. The first step consists of PSF estimation from the science image. For this, we made use of an analytical PSF model, whose parameters are estimated based on a marginal algorithm. This PSF was then used for deconvolution. In this study, we first investigated the requirements in terms of PSF parameter knowledge to obtain an accurate and yet resilient deconvolution process using simulations. We show that current marginal algorithms do not provide the required level of accuracy, especially in the presence of small objects. Therefore, we modified the marginal algorithm by providing a new model for object description, leading to an improved estimation of the required PSF parameters. Our method fulfills the deconvolution requirement with realistic system configurations and different classes of Solar System objects in simulations. Finally, we validate our method by performing blind deconvolution with SPHERE/ZIMPOL observations of the Kleopatra asteroid. △ Less

Submitted 16 March, 2023; originally announced March 2023.

Comments: accepted for publication in Astronomy & Astrophysics (A&A)

Journal ref: A&A 673, A72 (2023)

The ESO's Extremely Large Telescope Working Groups

Authors: Paolo Padovani, Michele Cirasuolo, Remco van der Burg, Faustine Cantalloube, Elizabeth George, Markus Kasper, Kieran Leschinski, Carlos Martins, Julien Milli, Sabine Möhler, Mark Neeser, Benoit Neichel, Angel Otarola, Rubén Sánchez-Janssen, Benoit Serra, Alain Smette, Elena Valenti, Christophe Verinaud, Joël Vernet, Olivier Absil, Guido Agapito, Morten Andersen, Carmelo Arcidiacono, Matej Arko, Pierre Baudoz , et al. (60 additional authors not shown)

Abstract: Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations an… ▽ More Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far. △ Less

Submitted 28 February, 2023; originally announced February 2023.

Comments: 8 pages, 4 figures

Journal ref: The Messenger, vol. 189, (December 2022) p. 23-30

Modeling noise propagation in Fourier-filtering wavefront sensing, fundamental limits and quantitative comparison

Authors: Vincent Chambouleyron, Olivier Fauvarque, Cédric Plantet, Jean-François Sauvage, Nicolas Levraud, Mahawa Cissé, Benoît Neichel, Thierry Fusco

Abstract: Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However,… ▽ More Adaptive optics (AO) is a technique allowing to drastically improve ground-based telescopes angular resolution. The wavefront sensor (WFS) is one of the key components of such systems, driving the fundamental performance limitations. In this paper, we focus on a specific class of WFS: the Fourier-filtering wavefront sensors (FFWFS). This class is known for its extremely high sensitivity. However, a clear and comprehensive noise propagation model for any kind of FFWFS is lacking. Considering read-out noise and photon noise, we derive a simple and comprehensive model allowing to understand how these noises propagates in the phase reconstruction in the linear framework. This new noise propagation model works for any kind of FFWFS, and allows to revisit the fundamental sensitivity limit of these sensors. Furthermore, a new comparison between widely used FFWFS is held. We focus on the two main used FFWFS classes: the Zernike WFS (ZWFS) and the pyramid WFS (PWFS), bringing new understanding of their behavior. △ Less

Submitted 6 January, 2023; v1 submitted 27 December, 2022; originally announced December 2022.

Journal ref: A&A 670, A153 (2023)

The equilibrium shape of (65) Cybele: primordial or relic of a large impact?

Authors: M. Marsset, M. Brož, J. Vermersch, N. Rambaux, M. Ferrais, M. Viikinkoski, J. Hanuš, E. Jehin, E. Podlewska-Gaca, P. Bartczak, G. Dudzinski, B. Carry, P. Vernazza, R. Szakáts, R. Duffard, A. Jones, D. Molina, T. Santana-Ros, Z. Benkhaldoun, M. Birlan, C. Dumas, R. Fétick, T. Fusco, L. Jorda, F. Marchis , et al. (2 additional authors not shown)

Abstract: Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to… ▽ More Cybele asteroids constitute an appealing reservoir of primitive material genetically linked to the outer Solar System, and the physical properties of the largest members can be readily accessed by large telescopes. We took advantage of the bright apparition of (65) Cybele in July and August 2021 to acquire high-angular-resolution images and optical light curves of the asteroid with which we aim to analyse its shape and bulk properties. 7 series of images acquired with VLT/SPHERE were combined with optical light curves to reconstruct the shape of the asteroid using the ADAM, MPCD, and SAGE algorithms. The origin of the shape was investigated by means of N-body simulations. Cybele has a volume-equivalent diameter of 263+/-3km and a bulk density of 1.55+/-0.19g.cm-3. Notably, its shape and rotation state are closely compatible with those of a Maclaurin equilibrium figure. The lack of a collisional family associated with Cybele and the higher bulk density of that body with respect to other large P-type asteroids suggest that it never experienced any large disruptive impact followed by rapid re-accumulation. This would imply that its present-day shape represents the original one. However, numerical integration of the long-term dynamical evolution of a hypothetical family shows that it is dispersed by gravitational perturbations and chaotic diffusion over Gyrs of evolution. The very close match between Cybele and an equilibrium figure opens up the possibility that D>260km small bodies from the outer Solar System all formed at equilibrium. However, we cannot rule out an old impact as the origin of the equilibrium shape. Cybele itself is found to be dynamically unstable, implying that it was recently (<1Ga) placed on its current orbit either through slow diffusion from a relatively stable orbit in the Cybele region or, less likely, from an unstable, JFC orbit in the planet-crossing region. △ Less

Submitted 1 December, 2022; originally announced December 2022.

Comments: 19 pages, 14 figures, 4 tables, accepted for publication in A&A

The high-albedo, low polarization disk around HD 114082 harbouring a Jupiter-sized transiting planet

Authors: N. Engler, J. Milli, R. Gratton, S. Ulmer-Moll, A. Vigan, A. -M. Lagrange, F. Kiefer, P. Rubini, A. Grandjean, H. M. Schmid, S. Messina, V. Squicciarini, J. Olofsson, P. Thébault, R. G. van Holstein, M. Janson, F. Ménard, J. P. Marshall, G. Chauvin, M. Lendl, T. Bhowmik, A. Boccaletti, M. Bonnefoy, C. del Burgo, E. Choquet , et al. (14 additional authors not shown)

Abstract: We present new optical and near-IR images of debris disk around the F-type star HD 114082. We obtained direct imaging observations and analysed the TESS photometric time series data of this target with a goal to search for planetary companions and to characterise the morphology of the debris disk and the scattering properties of dust particles. HD 114082 was observed with the VLT/SPHERE instrument… ▽ More We present new optical and near-IR images of debris disk around the F-type star HD 114082. We obtained direct imaging observations and analysed the TESS photometric time series data of this target with a goal to search for planetary companions and to characterise the morphology of the debris disk and the scattering properties of dust particles. HD 114082 was observed with the VLT/SPHERE instrument: the IRDIS camera in the K band together with the IFS in the Y, J and H band using the ADI technique as well as IRDIS in the H band and ZIMPOL in the I_PRIME band using the PDI technique. The scattered light images were fitted with a 3D model for single scattering in an optically thin dust disk. We performed aperture photometry in order to derive the scattering and polarized phase functions, polarization fraction and spectral scattering albedo for the dust particles in the disk. This method was also used to obtain the reflectance spectrum of the disk to retrieve the disk color and study the dust reflectivity in comparison to the debris disk HD 117214. We also performed the modeling of the HD 114082 light curve measured by TESS using the models for planet transit and stellar activity to put constraints on radius of the detected planet and its orbit. The debris disk appears as an axisymmetric debris belt with a radius of ~0.37$"$ (35 au), inclination of ~83$^\circ$ and a wide inner cavity. Dust particles in HD 114082 have a maximum polarization fraction of ~17% and a high reflectivity which results in a spectral scattering albedo of 0.65. The analysis of TESS photometric data reveals a transiting planetary companion to HD 114082 with a radius of $\sim$1~$\rm R_{J}$ on an orbit with a semi-major axis of $0.7 \pm 0.4$ au. Combining different data, we reach deep sensitivity limits in terms of companion masses down to ~5$M_{\rm Jup}$ at 50 au, and ~10 $M_{\rm Jup}$ at 30 au from the central star. △ Less

Submitted 11 January, 2023; v1 submitted 21 November, 2022; originally announced November 2022.

Comments: 27 pages

Journal ref: A&A 672, A1 (2023)

Optimizing Fourier-Filtering WFS to reach sensitivity close to the fundamental limit

Authors: Vincent Chambouleyron, Olivier Fauvarque, Cédric Plantet, Jean-François Sauvage, Nicolas Levraud, Mahawa Cissé, Benoît Neichel, Thierry Fusco

Abstract: To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). W… ▽ More To reach the full potential of the new generation of ground based telescopes, an extremely fine adjustment of the phase is required. Wavefront control and correction before detection has therefore become one of the cornerstones of instruments to achieve targeted performance, especially for high-contrast imaging. A crucial feature of accurate wavefront control leans on the wavefront sensor (WFS). We present a strategy to design new Fourier-Filtering WFS that encode the phase close from the fundamental photon efficiency limit. This strategy seems promising as it generates highly sensitive sensors suited for different pupil shape configurations. △ Less

Submitted 23 October, 2022; originally announced October 2022.

Journal ref: Proc. SPIE 12185, Adaptive Optics Systems VIII, 121852T (29 August 2022)

PSF nowcast using PASSATA simulations -- Towards a PSF forecast

Authors: A. Turchi, G. Agapito, E. Masciadri, O. Beltramo-Martin, J. Milli, C. Plantet, F. Rossi, E. Pinna, J. F. Sauvage, B. Neichel, T. Fusco

Abstract: Characterizing the PSF of adaptive optics instruments is of paramount importance both for instrument design and observation planning/optimization. Simulation software, such as PASSATA, have been successfully utilized for PSF characterization in instrument design, which make use of standardized atmospheric turbulence profiles to produce PSFs that represent the typical instrument performance. In thi… ▽ More Characterizing the PSF of adaptive optics instruments is of paramount importance both for instrument design and observation planning/optimization. Simulation software, such as PASSATA, have been successfully utilized for PSF characterization in instrument design, which make use of standardized atmospheric turbulence profiles to produce PSFs that represent the typical instrument performance. In this contribution we study the feasibility of using such tool for nowcast application (present-time forecast), such as the characterization of an on-sky measured PSF in real observations. Specifically we will analyze the performance of the simulation software in characterizing the real-time PSF of two different state-of-the-art SCAO adaptive optics instruments: SOUL at the LBT, and SAXO at the VLT. The study will make use of on-sky measurements of the atmospheric turbulence and compare the results of the simulations to the measured PSF figures of merit (namely the FHWM and the Strehl Ratio) retrieved from the instrument telemetry in real observations. Our main goal in this phase is to quantify the level of uncertainly of the AO simulations in reproducing real on-sky observed PSFs with an end-to-end code (PASSATA). In a successive phase we intend to use a faster analytical code (TIPTOP). This work is part of a wider study which aims to use simulation tools joint to atmospheric turbulence forecasts performed nightly to forecast in advance the PSF and support science operations of ground-based telescopes facilities. The 'PSF forecast' option might therefore be added to ALTA Center or the operational forecast system that will be implemented soon at ESO. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Comments: 10 pages, 6 figures

Journal ref: Proc. Volume 12185, SPIE Astronomical Telescopes + Instrumentation, 2022, Montreal, Quebec, Canada

Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed

Authors: Lauren Schatz, Johanan Codona, Joseph D. Long, Jared R. Males, Weslin Pullen, Jennifer Lumbres, Kyle Van Gorkom, Vincent Chambouleyron, Laird M. Close, Carlos Correia, Olivier Fauvarque, Thierry Fusco, Olivier Guyon, Michael Hart, Pierre Janin-Potiron, Robert Johnson, Nemanja Jovanovic, Mala Mateen, Jean-Francois Sauvage, Benoit Neichel

Abstract: The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component… ▽ More The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: 28 Pages, 15 Figures, and 4 Tables

Adapting the pyramid wavefront sensor for pupil fragmentation of the ELT class telescopes

Authors: Nicolas Levraud, Vincent Chambouleyron, Olivier Fauvarque, Mahawa Cissé, Jean-François Sauvage, Benoît Neichel, Charlotte Bond, Enrico Pinna, Simone Esposito, Noah Schwartz, Thierry Fusco

Abstract: The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be… ▽ More The next generation of Extremely Large Telescope (24 to 39m diameter) will suffer from the so-called "pupil fragmentation" problem. Due to their pupil shape complexity (segmentation, large spiders ...), some differential pistons may appear between some isolated part of the full pupil during the observations. Although classical AO system will be able to correct for turbulence effects, they will be blind to this specific telescope induced perturbations. Hence, such differential piston, a.k.a petal modes, will prevent to reach the diffraction limit of the telescope and ultimately will represent the main limitation of AO-assisted observation with an ELT. In this work we analyse the spatial structure of these petal modes and how it affects the ability of a Pyramid Wavefront sensor to sense them. Then we propose a variation around the classical Pyramid concept for increasing the WFS sensitivity to this particular modes. Nevertheless, We show that one single WFS can not accurately and simultaneously measure turbulence and petal modes. We propose a double path wavefront sensor scheme to solve this problem. We show that such a scheme,associated to a spatial filtering of residual turbulence in the second WFS path dedicated to petal mode sensing, allows to fully measure and correct for both turbulence and fragmentation effects and will eventually restore the full capability and spatial resolution of the future ELT. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Journal ref: Adaptive Optics Systems VIII, Jul 2022, Montr{é}al, France. pp.198

RISTRETTO: high-resolution spectroscopy at the diffraction limit of the VLT

Authors: Christophe Lovis, Nicolas Blind, Bruno Chazelas, Jonas G. Kühn, Ludovic Genolet, Ian Hughes, Michaël Sordet, Robin Schnell, Martin Turbet, Thierry Fusco, Jean-François Sauvage, Maddalena Bugatti, Nicolas Billot, Janis Hagelberg, Eddy Hocini, Olivier Guyon, Christoph Mordasini

Abstract: RISTRETTO is a visible high-resolution spectrograph fed by an extreme adaptive optics (XAO) system, to be proposed as a visitor instrument on ESO VLT. The main science goal of RISTRETTO is the detection and atmospheric characterization of exoplanets in reflected light, in particular the temperate rocky planet Proxima b. RISTRETTO will be able to measure albedos and detect atmospheric features in a… ▽ More RISTRETTO is a visible high-resolution spectrograph fed by an extreme adaptive optics (XAO) system, to be proposed as a visitor instrument on ESO VLT. The main science goal of RISTRETTO is the detection and atmospheric characterization of exoplanets in reflected light, in particular the temperate rocky planet Proxima b. RISTRETTO will be able to measure albedos and detect atmospheric features in a number of exoplanets orbiting nearby stars for the first time. It will do so by combining a high-contrast AO system working at the diffraction limit of the telescope to a high-resolution spectrograph, via a 7-spaxel integral-field unit (IFU) feeding single-mode fibers. Further science cases for RISTRETTO include the study of accreting protoplanets such as PDS 70 b & c through spectrally-resolved H-alpha emission; and spatially-resolved studies of Solar System objects such as icy moons and the ice giants Uranus and Neptune. The project is in an advanced design phase for the spectrograph and IFU/fiber-link sub-systems, and a preliminary design phase for the AO front-end. Construction of the spectrograph and IFU/fiber-link will start at the end of 2022. RISTRETTO is a pathfinder instrument in view of similar developments at ESO ELT, in particular the SCAO-IFU mode of ELT-ANDES and the future ELT-PCS instrument. △ Less

Submitted 31 August, 2022; originally announced August 2022.

Comments: 9 pages, 6 figures, proceedings of SPIE Astronomical Telescopes + Instrumentation, 2022, Montréal, Québec, Canada

Journal ref: Proc. SPIE 12184, Ground-based and Airborne Instrumentation for Astronomy IX, 121841Q (29 August 2022)

Super-resolution wavefront reconstruction

Authors: Sylvain Oberti, Carlos Correia, Thierry Fusco, Benoit Neichel, Pierre Guiraud

Abstract: Super-Resolution (SR) is a technique that seeks to upscale the resolution of a set of measured signals. SR retrieves higher-frequency signal content by combining multiple lower resolution sampled data sets. SR is well known both in the temporal and spatial domains. It is widely used in imaging to reduce aliasing and enhance the resolution of coarsely sampled images.This paper applies the SR techni… ▽ More Super-Resolution (SR) is a technique that seeks to upscale the resolution of a set of measured signals. SR retrieves higher-frequency signal content by combining multiple lower resolution sampled data sets. SR is well known both in the temporal and spatial domains. It is widely used in imaging to reduce aliasing and enhance the resolution of coarsely sampled images.This paper applies the SR technique to the bi-dimensional wavefront reconstruction. In particular, we show how SR is intrinsically suited for tomographic multi WaveFront Sensor (WFS) AO systems revealing many of its advantages with minimal design effort. This paper provides a direct space and Fourier-optics description of the wavefront sensing operation and demonstrate how SR can be exploited through signal reconstruction, especially in the framework of Periodic Nonuniform Sampling. Both meta uniform and nonuniform sampling schemes are investigated. Then, the SR bi-dimensional model for a Shack Hartmann (SH) WFS is provided and the characteristics of the sensitivity function are analyzed. The SR concept is finally validated with numerical simulations of representative multi WFS SH AO systems. Our results show that combining several WFS samples in a SR framework grants access to a larger number of modes than the native one offered by a single WFS and that despite the fixed sub-aperture size across samples. Furthermore, we show that the associated noise propagation is not degraded under SR. Finally, the concept is extended to the signal produced by single Pyramid WFS. In conclusion, SR applied to wavefront reconstruction offers a new parameter space to explore as it decouples the size of the subaperture from the desired wavefront sampling resolution. By cutting short with old assumptions, new, more flexible and better performing AO designs become now possible. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: Astronomy & Astrophysics Section: 13. Astronomical instrumentation AA/2022/43954

Journal ref: A&A 667, A48 (2022)

Towards virtual access of adaptive optics telemetry data

Authors: Tiago Gomes, Carlos Correia, Lisa Bardou, Olivier Beltramo-Martin, Thierry Fusco, Caroline Kulcsár, Timothy Morris, Nuno Morujão, Benoît Neichel, James Osborn, Paulo Garcia

Abstract: Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data:… ▽ More Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data: the lack of standardisation, which hinders access. We propose an object-oriented Python package for AO telemetry, whose data model abstracts the user from an underlining archive-ready data exchange standard based on the Flexible Image Transport System (FITS). Its design supports data from a wide range of existing and future AO systems, either in raw format or abstracted from actual instrument details. We exemplify its usage with data from active AO systems on 10m-class observatories, of which two are currently supported (AOF and Keck), with plans for more. △ Less

Submitted 28 July, 2022; originally announced July 2022.

RISTRETTO: coronagraph and AO designs enabling High Dispersion Coronagraphy at 2 lambda/D

Authors: N. Blind, B. Chazelas, J. Kühn, E. Hocini, C. Lovis, M. Beaulieu, T. Fusco, L. Genolet, O. Guyon, J. Hagelberg, I. Hughes, P. Martinez, J. -F. Sauvage, R. Schnell, M. Sordet, A. Spang

Abstract: RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO, aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets pl… ▽ More RISTRETTO is the evolution of the original idea of coupling the VLT instruments SPHERE and ESPRESSO, aiming at High Dispersion Coronagraphy. RISTRETTO is a visitor instrument that should enable the characterization of the atmospheres of nearby exoplanets in reflected light, by using the technique of high-contrast, high-resolution spectroscopy. Its goal is to observe Prox Cen b and other planets placed at about 35mas from their star, i.e. 2lambda/D at lambda=750nm. The instrument is composed of an extreme adaptive optics, a coronagraphic Integral Field Unit, and a diffraction-limited spectrograph (R=140.000, lambda=620-840 nm). We present the status of our studies regarding the coronagraphic IFU and the XAO system. The first in particular is based on a modified version of the PIAA apodizer, allowing nulling on the first diffraction ring. Our proposed design has the potential to reach > 50% coupling and <1E-4 contrast at 2lambda/D in median seeing conditions. △ Less

Submitted 30 August, 2022; v1 submitted 28 July, 2022; originally announced July 2022.

Comments: Proceeding of SPIE Telescopes+Instrumentation 2022. [Added acknowledgments]

HARMONI at ELT: designing a laser guide star wavefront sensors for the ELT

Authors: Anne Costille, Anne Bonnefoi, Edgard Renault, William Ceria, Kjetil Dohlen, Benoit Neichel, Zoltan Hubert, Jean-Jacques Correia, Thibaut Moulin, Saul Menendez Mendoza, Thierry Fusco, Pascal Vola, Felipe Pedreros, Pierre Jouve, El Kacem, Fraser Hadi, Hermine Schnetler, Dave Melotte, Niranjan Thatte

Abstract: HARMONI is the first light visible and near-IR integral field spectrograph for the ELT covering a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes-SCAO and LTAO-or with no AO. The project is preparing for Final Design Reviews. The laser Tomographic AO (LTAO) system provides AO cor… ▽ More HARMONI is the first light visible and near-IR integral field spectrograph for the ELT covering a large spectral range from 450nm to 2450nm with resolving powers from 3500 to 18000 and spatial sampling from 60mas to 4mas. It can operate in two Adaptive Optics modes-SCAO and LTAO-or with no AO. The project is preparing for Final Design Reviews. The laser Tomographic AO (LTAO) system provides AO correction with very high sky-coverage thanks to two systems: the Laser Guide Star Sensors (LGSS) and the Natural Guide Star Sensors (NGSS). LGSS is dedicated to the analysis of the wavefront coming from 6 laser guide stars created by the ELT. It is made of 6 independent wavefront sensor (WFS) modules mounted on a rotator of 600mm diameter to stabilise the pupil onto the microlens array in front of the detector. The optical design accepts elongated spots of up to 16 arcsec with no truncation using a CMOS detector from SONY. We will present the final optical and mechanical design of the LGSS based on freeform lenses to minimize the numbers of optical components and to accommodate for the diversity of sodium layer configurations. We will focus on rotator design, illustrating how we will move 1 tons with 90" accuracy in restrictive environment. Finally, we will present the strategy to verify the system in HARMONI context. The main challenge for the verification being how to test an AO system without access to the deformable mirror, part of the ELT. △ Less

Submitted 18 July, 2022; originally announced July 2022.

Journal ref: SPIE Astronomical Telescopes + Instrumentation 2022, Jul 2022, Montr{é}al, Canada

Key wavefront sensors features for laser-assisted tomographic adaptive optics systems on the Extremely Large Telescope

Authors: Thierry Fusco, Guido Agapito, Benoit Neichel, Sylvain Oberti, Carlos Correia, Pierre Haguenauer, Cédric Plantet, Felipe Pedreros, Zibo Ke, Anne Costille, Pierre Jouve, Lorenzo Busoni, Simone Esposito

Abstract: Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a tr… ▽ More Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a trade-off between the pupil spatial sampling [number of sub-apertures (SAs)], the SA field-of-view (FoV) and the pixel sampling within each SA is required. For ELT scales, this trade-off is also driven by strong technical constraints, especially concerning the available detectors and in particular their number of pixels. For SHWFS, a larger field of view per SA allows mitigating the LGS spot truncation, which represents a severe loss of performance due to measurement biases. For a given number of available detectors pixels, the SA FoV is competing with the proper sampling of the LGS spots, and/or the total number of SAs. We proposed a sensitivity analysis, and we explore how these parameters impacts the final performance. In particular, we introduce the concept of super resolution, which allows one to reduce the pupil sampling per WFS and opens an opportunity to propose potential LGSWFS designs providing the best performance for ELT scales. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: 21 pages, 11 figures, 1 table, part of the 2022 JATIS Special Section on Extremely Large Telescopes

Journal ref: J. of Astronomical Telescopes, Instruments, and Systems, 8(2), 021514 (2022)

In-depth direct imaging and spectroscopic characterization of the young Solar System analog HD 95086

Authors: C. Desgrange, G. Chauvin, V. Christiaens, F. Cantalloube, L. -X. Lefranc, H. Le Coroller, P. Rubini, G. P. P. L. Otten, H. Beust, M. Bonavita, P. Delorme, M. Devinat, R. Gratton, A. -M. Lagrange, M. Langlois, D. Mesa, J. Milli, J. Szulágyi, M. Nowak, L. Rodet, P. Rojo, S. Petrus, M. Janson, T. Henning, Q. Kral , et al. (26 additional authors not shown)

Abstract: Context. HD 95086 is a young nearby Solar System analog hosting a giant exoplanet orbiting at 57 au from the star between an inner and outer debris belt. The existence of additional planets has been suggested as the mechanism that maintains the broad cavity between the two belts. Aims. We present a dedicated monitoring of HD 95086 with the VLT/SPHERE instrument to refine the orbital and atmosphe… ▽ More Context. HD 95086 is a young nearby Solar System analog hosting a giant exoplanet orbiting at 57 au from the star between an inner and outer debris belt. The existence of additional planets has been suggested as the mechanism that maintains the broad cavity between the two belts. Aims. We present a dedicated monitoring of HD 95086 with the VLT/SPHERE instrument to refine the orbital and atmospheric properties of HD 95086 b, and to search for additional planets in this system. Methods. SPHERE observations, spread over ten epochs from 2015 to 2019 and including five new datasets, were used. Combined with archival observations, from VLT/NaCo (2012-2013) and Gemini/GPI (2013-2016), the extended set of astrometric measurements allowed us to refine the orbital properties of HD 95086 b. We also investigated the spectral properties and the presence of a circumplanetary disk around HD 95086 b by using the special fitting tool exploring the diversity of several atmospheric models. In addition, we improved our detection limits in order to search for a putative planet c via the K-Stacker algorithm. Results. We extracted for the first time the JH low-resolution spectrum of HD 95086 b by stacking the six best epochs, and confirm its very red spectral energy distribution. Combined with additional datasets from GPI and NaCo, our analysis indicates that this very red color can be explained by the presence of a circumplanetary disk around planet b, with a range of high-temperature solutions (1400-1600 K) and significant extinction (Av > 10 mag), or by a super-solar metallicity atmosphere with lower temperatures (800-1300 K), and small to medium amount of extinction (Av < 10 mag). We do not find any robust candidates for planet c, but give updated constraints on its potential mass and location. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 29 pages, 20 figures, A&A, accepted

Journal ref: A&A 664, A139 (2022)

The Three-Sided PyramidWavefront Sensor. I. Simulations and Analysis for Astronomical Adaptive Optics

Authors: Lauren Schatz, Jared R. Males, Carlos Correia, Benoit Neichel, Vincent Chambouleyron, Johanan Codona, Olivier Fauvarque, Jean-François Sauvage, Thierry Fusco, Michael Hart, Pierre Janin-Potiron, Robert Johnson, Joseph Long, Mala Mateen

Abstract: For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope… ▽ More For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope pupil for wavefront sensing, compared to the conventional four-sided PWFS (4PWFS) which uses four pupils. The 3PWFS uses fewer detector pixels than the 4PWFS and should therefore be less sensitive to read noise. Here we develop a mathematical formalism based on the diffraction theory description of the Foucault knife edge test that predicts the intensity pattern after the PWFS. Our formalism allows us to calculate the intensity in the pupil images formed by the PWFS in the presence of phase errors corresponding to arbitrary Fourier modes. We then use the Object Oriented MATLAB Adaptive Optics toolbox (OOMAO) to simulate an end-to-end model of an adaptive optics system using a PWFS with modulation and compare the performance of the 3PWFS to the 4PWFS. In the case of a low read noise detector, the Strehl ratios of the 3PWFS and 4PWFS are within 0.01. When we included higher read noise in the simulation, we found a Strehl ratio gain of 0.036 for the 3PWFS using Raw Intensity over the 4PWFS using Slopes Maps at a stellar magnitude of 10. At the same magnitude, the 4PWFS RI also outperformed the 4PWFS SM, but the gain was only 0.012 Strehl. This is significant because 4PWFS using Slopes Maps is how the PWFS is conventionally used for AO wavefront sensing. We have found that the 3PWFS is a viable wavefront sensor that can fully reconstruct a wavefront and produce a stable closed-loop with correction comparable to that of a 4PWFS, with modestly better performance for high read-noise detectors. △ Less

Submitted 13 September, 2021; originally announced September 2021.

Comments: 39 pages, 15 figures

(216) Kleopatra, a low density critically rotating M-type asteroid

Authors: F. Marchis, L. Jorda, P. Vernazza, M. Brož, J. Hanuš, M. Ferrais, F. Vachier, N. Rambaux, M. Marsset, M. Viikinkoski, E. Jehin, S. Benseguane, E. Podlewska-Gaca, B. Carry, A. Drouard, S. Fauvaud, M. Birlan, J. Berthier, P. Bartczak, C. Dumas, G. Dudzinski, J. Durech, J. Castillo-Rogez, F. Cipriani, F. Colas , et al. (14 additional authors not shown)

Abstract: Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of… ▽ More Context. The recent estimates of the 3D shape of the M/Xe-type triple asteroid system (216) Kleopatra indicated a density of 5 g.cm$^{-3}$. Such a high density implies a high metal content and a low porosity which is not easy to reconcile with its peculiar dumbbell shape. Aims. Given the unprecedented angular resolution of the VLT/SPHERE/ZIMPOL camera, we aim to constrain the mass and the shape of Kleopatra with high accuracy, hence its density. Methods. We combined our new VLT/SPHERE observations of Kleopatra recorded in 2017 and 2018 with archival data, as well as lightcurve, occultation, and delay-Doppler images, to derive its 3D shape model using two different algorithms (ADAM, MPCD). Furthermore, an N-body dynamical model allowed us to retrieve the orbital elements of the two moons as explained in the accompanying paper. Results. The shape of Kleopatra is very close to an equilibrium dumbbell figure with two lobes and a thick neck. Its volume equivalent diameter (118.75$\pm$1.40) km and mass (2.97$\pm$0.32) 10$^{18}$ kg imply a bulk density of (3.38$\pm$0.50) g cm$^{-3}$. Such a low density for a supposedly metal-rich body indicates a substantial porosity within the primary. This porous structure along with its near-equilibrium shape is compatible with a formation scenario including a giant impact followed by reaccumulation. Kleopatra's current rotation period and dumbbell shape imply that it is in a critically rotating state. The low effective gravity along the equator of the body, together with the equatorial orbits of the moons and possibly rubble-pile structure, opens the possibility that the moons formed via mass shedding. Conclusions. Kleopatra is a puzzling multiple system due to the unique characteristics of the primary. It deserves particular attention in the future, with the Extremely Large Telescopes and possibly a dedicated space mission. △ Less

Submitted 16 August, 2021; originally announced August 2021.

Comments: Accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 653, A57 (2021)

Revealing asymmetrical dust distribution in the inner regions of HD 141569

Authors: Garima Singh, Trisha Bhowmik, Anthony Boccaletti, Philippe Thébault, Quentin Kral, Julien Milli, Johan Mazoyer, Eric Pantin, Johan Olofsson, Ryan Boukrouche, Emmanuel Di Folco, Markus Janson, Maud Langlois, Anne Lise Maire, Arthur Vigan, Myriam Benisty, Jean-Charles Augereau, Clement Perrot, Raffaele Gratton, Thomas Henning, Francois Ménard, Emily Rickman, Zahed Wahhaj, Alice Zurlo, Beth Biller , et al. (20 additional authors not shown)

Abstract: We obtained polarimetric differential imaging of a gas-rich debris disk around HD 141569A with SPHERE in the H-band to compare the scattering properties of the innermost ring at 44 au with former observations in total intensity with the same instrument. In polarimetric imaging, we observed that the intensity of the ring peaks in the south-east, mostly in the forward direction, whereas in total int… ▽ More We obtained polarimetric differential imaging of a gas-rich debris disk around HD 141569A with SPHERE in the H-band to compare the scattering properties of the innermost ring at 44 au with former observations in total intensity with the same instrument. In polarimetric imaging, we observed that the intensity of the ring peaks in the south-east, mostly in the forward direction, whereas in total intensity imaging, the ring is detected only at the south. This noticeable characteristic suggests a non-uniform dust density in the ring. We implemented a density function varying azimuthally along the ring and generated synthetic images both in polarimetry and in total intensity, which are then compared to the actual data. We find that the dust density peaks in the south-west at an azimuthal angle of $220^{\circ} \sim 238^{\circ}$ with a rather broad width of $61^{\circ} \sim 127^{\circ}$. Although there are still uncertainties that remain in the determination of the anisotropic scattering factor, the implementation of an azimuthal density variation to fit the data proved to be robust. Upon elaborating on the origin of this dust density distribution, we conclude that it could be the result of a massive collision when we account for the effect of the high gas mass that is present in the system on the dynamics of grains. Using the outcome of this modelization, we further measured the polarized scattering phase function for the observed scattering angle between 33$^{\circ}$ and 147$^{\circ}$ as well as the spectral reflectance of the southern part of the ring between 0.98 $μ$m and 2.1 $μ$m. We tentatively derived the grain properties by comparing these quantities with MCFOST models and assuming Mie scattering. Our preliminary interpretation indicates a mixture of porous sub-micron sized astro-silicate and carbonaceous grains. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: 21 pages, 18 figures, Accepted for publication in Astronomy & Astrophysics journal

Journal ref: A&A 653, A79 (2021)

An advanced multipole model for (216) Kleopatra triple system

Authors: M. Brož, F. Marchis, L. Jorda, J. Hanuš, P. Vernazza, M. Ferrais, F. Vachier, N. Rambaux, M. Marsset, M. Viikinkoski, E. Jehin, S. Benseguane, E. Podlewska-Gaca, B. Carry, A. Drouard, S. Fauvaud, M. Birlan, J. Berthier, P. Bartczak, C. Dumas, G. Dudziński, J. Ďurech, J. Castillo-Rogez, F. Cipriani, F. Colas , et al. (15 additional authors not shown)

Abstract: To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the… ▽ More To interpret adaptive-optics observations of (216) Kleopatra, we need to describe an evolution of multiple moons, orbiting an extremely irregular body and including their mutual interactions. Such orbits are generally non-Keplerian and orbital elements are not constants. Consequently, we use a modified $N$-body integrator, which was significantly extended to include the multipole expansion of the gravitational field up to the order $\ell = 10$. Its convergence was verified against the `brute-force' algorithm. We computed the coefficients $C_{\ell m},S_{\!\ell m}$ for Kleopatra's shape, assuming a~constant bulk density. For solar-system applications, it was also necessary to implement a variable distance and geometry of observations. Our $χ^2$ metric then accounts for the absolute astrometry, the relative astrometry (2nd moon with respect to 1st), angular velocities, and also silhouettes, constraining the pole orientation. This allowed us to derive the orbital elements of Kleopatra's two moons. Using both archival astrometric data and new VLT/SPHERE observations (ESO LP 199.C-0074), we were able to identify the true periods of the moons, $P_1 = (1.822359\pm0.004156)\,{\rm d}$, $P_2 = (2.745820\pm0.004820)\,{\rm d}$. They orbit very close to the 3:2 mean-motion resonance, but their osculating eccentricities are too small compared to other perturbations (multipole, mutual), so that regular librations of the critical argument are not present. The resulting mass of Kleopatra, $m_1 = (1.49\pm0.16)\cdot10^{-12}\,M_\odot$ or $2.97\cdot10^{18}\,{\rm kg}$, is significantly lower than previously thought. An implication explained in the accompanying paper (Marchis et al.) is that (216) Kleopatra is a critically rotating body. △ Less

Submitted 19 May, 2021; originally announced May 2021.

Comments: accepted in A&A

Journal ref: A&A 653, A56 (2021)

Variation on a Zernike wavefront sensor theme: optimal use of photons

Authors: Vincent Chambouleyron, Olivier Fauvarque, Jean-François Sauvage, Kjetil Dohlen, Nicolas Levraud, Arthur Vigan, Mamadou N'Diaye, Benoît Neichel, Thierry Fusco

Abstract: The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shift… ▽ More The Zernike wavefront sensor (ZWFS) is a concept belonging to the wide class Fourier-filtering wavefront sensor (FFWFS). The ZWFS is known for its extremely high sensitivity while having a low dynamic range, which makes it a unique sensor for second stage adaptive optics (AO) systems or quasi-static aberrations calibration sensor. This sensor is composed of a focal plane mask made of a phase shifting dot fully described by two parameters: its diameter and depth. In this letter, we aim to improve the performance of this sensor by changing the diameter of its phase shifting dot. We begin with a general theoretical framework providing an analytical description of the FFWFS properties, then we predict the expected ZWFS sensitivity for different configurations of dot diameters and depths. The analytical predictions are then validated with end-to-end simulations. From this, we propose a variation of the classical ZWFS shape which exhibits extremely appealing properties. We show that the ZWFS sensitivity can be optimized by modifying the dot diameter and even reach the optimal theoretical limit, with a trade-off for low spatial frequencies sensitivity. As an example, we show that a ZWFS with a 2λ/D dot diameter (where λ is the sensing wavelength and D the telescope diameter), hereafter called Z2WFS, exhibits a sensitivity twice higher than the classical 1.06λ/D ZWFS for all the phase spatial components except for tip-tilt modes. Furthermore, this gain in sensitivity does not impact the dynamic range of the sensor, and the Z2WFS exhibits a similar dynamical range as the classical 1.06λ/D ZWFS. This study opens the path to the conception of diameter-optimized ZWFS. △ Less

Submitted 17 May, 2021; originally announced May 2021.

SPRINT: System Parameters Recurrent INvasive Tracking, a fast and least-cost online calibration strategy for adaptive optics

Authors: C. T. Heritier, T. Fusco, S. Oberti, B. Neichel, S. Esposito, P. -Y. Madec

Abstract: The future large adaptive telescopes will trigger new constraints for the calibration of Adaptive Optics (AO) systems equipped with pre-focal Deformable Mirrors (DM). The image of the DM actuators grid as seen by the Wave-Front Sensor (WFS) may evolve during the operations due to the flexures of the opto-mechanical components present in the optical path. The latter will result in degraded AO perfo… ▽ More The future large adaptive telescopes will trigger new constraints for the calibration of Adaptive Optics (AO) systems equipped with pre-focal Deformable Mirrors (DM). The image of the DM actuators grid as seen by the Wave-Front Sensor (WFS) may evolve during the operations due to the flexures of the opto-mechanical components present in the optical path. The latter will result in degraded AO performance that will impact the scientific operation. To overcome this challenge, it will be necessary to regularly monitor and compensate for these DM/WFS mis-registrations either by physically re-aligning some optical components or by updating the control matrix of the system. In this paper, we present a new strategy to track mis-registrations using a pseudo-synthetic model of the AO system. The method is based on an invasive approach where signals are acquired on-sky, before or during the scientific operations, and fed to the model to extract the mis-registration parameters. We introduce a method to compute the most sensitive modes to these mis-registrations that allows to reduce the number of degrees of freedom required by the algorithm and minimize the impact on the scientific performance. We demonstrate that, using only a few of these well selected signals, the method provides a very good accuracy on the parameters estimation, well under the targeted accuracy, and has a negligible impact on the scientific path. In addition, the method appears to be very robust to varying operating conditions of noise and atmospheric turbulence and performs equally for both Pyramid and Shack-Hartmann WFS. △ Less

Submitted 22 April, 2021; originally announced April 2021.

HARMONI: the ELT's First-Light Near-infrared and Visible Integral Field Spectrograph

Authors: Niranjan Thatte, Matthias Tecza, Hermine Schnetler, Benoît Neichel, Dave Melotte, Thierry Fusco, Vanessa Ferraro-Wood, Fraser Clarke, Ian Bryson, Kieran O'Brien, Mario Mateo, Begoña Garcia Lorenzo, Chris Evans, Nicolas Bouché, Santiago Arribas, the HARMONI Consortium

Abstract: The High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI) is the visible and near-infrared (NIR), adaptive-optics-assisted, integral field spectrograph for ESO's Extremely Large Telescope (ELT). It will have both a single-conjugate adaptive optics (SCAO) mode (using a single bright natural guide star) and a laser tomographic adaptive optics (LTAO) mode… ▽ More The High Angular Resolution Monolithic Optical and Near-infrared Integral field spectrograph (HARMONI) is the visible and near-infrared (NIR), adaptive-optics-assisted, integral field spectrograph for ESO's Extremely Large Telescope (ELT). It will have both a single-conjugate adaptive optics (SCAO) mode (using a single bright natural guide star) and a laser tomographic adaptive optics (LTAO) mode (using multiple laser guide stars), providing near diffraction-limited hyper-spectral imaging with high performance and good sky coverage, respectively. A unique high-contrast adaptive optics (HCAO) capability has recently been added for exoplanet characterisation. A large detector complement of eight HAWAII-4RG arrays, four choices of spaxel scale, and 11 grating choices with resolving powers ranging from R~3000 to R~17000 make HARMONI a very versatile instrument that can cater to a wide range of observing programmes. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: As published in the ESO Messenger

Journal ref: ESO Messenger No. 182, 2021

Evidence for differentiation of the most primitive small bodies

Authors: B. Carry, P. Vernazza, F. Vachier, M. Neveu, J. Berthier J. Hanus, M. Ferrais, L. Jorda, M. Marsset, M. Viikinkoski, P. Bartczak, R. Behrend, Z. Benkhaldoun, M. Birlan, J. Castillo-Rogez, F. Cipriani, F. Colas, A. Drouard, G. P. Dudzinski, J. Desmars, C. Dumas, J. Durech, R. Fetick, T. Fusco, J. Grice, E. Jehin , et al. (18 additional authors not shown)

Abstract: Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D sh… ▽ More Dynamical models of Solar System evolution have suggested that P-/D-type volatile-rich asteroids formed in the outer Solar System and may be genetically related to the Jupiter Trojans, the comets and small KBOs. Indeed, their spectral properties resemble that of anhydrous cometary dust. High-angular-resolution images of P-type asteroid (87) Sylvia with VLT/SPHERE were used to reconstruct its 3D shape, and to study the dynamics of its two satellites. We also model Sylvia's thermal evolution. The shape of Sylvia appears flattened and elongated. We derive a volume-equivalent diameter of 271 +/- 5 km, and a low density of 1378 +/- 45 kg.m-3. The two satellites orbit Sylvia on circular, equatorial orbits. The oblateness of Sylvia should imply a detectable nodal precession which contrasts with the fully-Keplerian dynamics of the satellites. This reveals an inhomogeneous internal structure, suggesting that Sylvia is differentiated. Sylvia's low density and differentiated interior can be explained by partial melting and mass redistribution through water percolation. The outer shell would be composed of material similar to interplanetary dust particles (IDPs) and the core similar to aqueously altered IDPs or carbonaceous chondrite meteorites such as the Tagish Lake meteorite. Numerical simulations of the thermal evolution of Sylvia show that for a body of such size, partial melting was unavoidable due to the decay of long-lived radionuclides. In addition, we show that bodies as small as 130-150 km in diameter should have followed a similar thermal evolution, while smaller objects, such as comets and the KBO Arrokoth, must have remained pristine, in agreement with in situ observations of these bodies. NASA Lucy mission target (617) Patroclus (diameter~140 km) may, however, be differentiated. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Comments: Accepted for publication in A&A

Journal ref: A&A 650, A129 (2021)

Perturbers: SPHERE detection limits to planetary-mass companions in protoplanetary disks

Authors: R. Asensio-Torres, Th. Henning, F. Cantalloube, P. Pinilla, D. Mesa, A. Garufi, S. Jorquera, R. Gratton, G. Chauvin, J. Szulagyi, R. van Boekel, R. Dong, G. -D. Marleau, M. Benisty, M. Villenave, C. Bergez-Casalou, C. Desgrange, M. Janson, M. Keppler, M. Langlois, F. Menard, E. Rickman, T. Stolker, M. Feldt, T. Fusco , et al. (3 additional authors not shown)

Abstract: The detection of a wide range of substructures such as rings, cavities and spirals has become a common outcome of high spatial resolution imaging of protoplanetary disks, both in the near-infrared scattered light and in the thermal millimetre continuum emission. The most frequent interpretation of their origin is the presence of planetary-mass companions perturbing the gas and dust distribution in… ▽ More The detection of a wide range of substructures such as rings, cavities and spirals has become a common outcome of high spatial resolution imaging of protoplanetary disks, both in the near-infrared scattered light and in the thermal millimetre continuum emission. The most frequent interpretation of their origin is the presence of planetary-mass companions perturbing the gas and dust distribution in the disk (perturbers), but so far the only bona-fide detection has been the two giant planets around PDS 70. Here, we collect a sample of 15 protoplanetary disks showing substructures in SPHERE scattered light images and present a homogeneous derivation of planet detection limits in these systems. We also estimate the mass of these perturbers through a Hill radius prescription and a comparison to ALMA data. Assuming that one single planet carves each substructure in scattered light, we find that more massive perturbers are needed to create gaps within cavities than rings, and that we might be close to a detection in the cavities of RX J1604, RX J1615, Sz Cha, HD 135344B and HD 34282. We reach typical mass limits in these cavities of 3-10 Mjup. For planets in the gaps between rings, we find that the detection limits of SPHERE are about an order of magnitude away in mass, and that the gaps of PDS 66 and HD 97048 seem to be the most promising structures for planet searches. The proposed presence of massive planets causing spiral features in HD 135344B and HD 36112 are also within SPHERE's reach assuming hot-start models.These results suggest that current detection limits are able to detect hot-start planets in cavities, under the assumption that they are formed by a single perturber located at the centre of the cavity. More realistic planet mass constraints would help to clarify whether this is actually the case, which might point to perturbers not being the only way of creating substructures. △ Less

Submitted 9 March, 2021; originally announced March 2021.

Comments: 26 pages, 33 figures, accepted for publication in A&A

Journal ref: A&A 652, A101 (2021)

The SPHERE infrared survey for exoplanets (SHINE)- I Sample definition and target characterization

Authors: S. Desidera, G. Chauvin, M. Bonavita, S. Messina, H. LeCoroller, T. Schmidt, R. Gratton, C. Lazzoni, M. Meyer, J. Schlieder, A. Cheetham, J. Hagelberg, M. Bonnefoy, M. Feldt, A-M. Lagrange, M. Langlois, A. Vigan, T. G. Tan, F. -J. Hambsch, M. Millward, J. Alcala, S. Benatti, W. Brandner, J. Carson, E. Covino , et al. (83 additional authors not shown)

Abstract: Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this… ▽ More Large surveys with new-generation high-contrast imaging instruments are needed to derive the frequency and properties of exoplanet populations with separations from $\sim$5 to 300 AU. A careful assessment of the stellar properties is crucial for a proper understanding of when, where, and how frequently planets form, and how they evolve. The sensitivity of detection limits to stellar age makes this a key parameter for direct imaging surveys. We describe the SpHere INfrared survey for Exoplanets (SHINE), the largest direct imaging planet-search campaign initiated at the VLT in 2015 in the context of the SPHERE Guaranteed Time Observations of the SPHERE consortium. In this first paper we present the selection and the properties of the complete sample of stars surveyed with SHINE, focusing on the targets observed during the first phase of the survey (from February 2015 to February 2017). This early sample composed of 150 stars is used to perform a preliminary statistical analysis of the SHINE data, deferred to two companion papers presenting the survey performance, main discoveries, and the preliminary statistical constraints set by SHINE. Based on a large database collecting the stellar properties of all young nearby stars in the solar vicinity (including kinematics, membership to moving groups, isochrones, lithium abundance, rotation, and activity), we selected the original sample of 800 stars that were ranked in order of priority according to their sensitivity for planet detection in direct imaging with SPHERE. The properties of the stars that are part of the early statistical sample were revisited, including for instance measurements from the GAIA Data Release 2. △ Less

Submitted 7 March, 2021; originally announced March 2021.

Journal ref: A&A 651, A70 (2021)

The SPHERE infrared survey for exoplanets (SHINE) -- II. Observations, Data reduction and analysis Detection performances and early-results

Authors: M. Langlois, R. Gratton, A. -M. Lagrange, P. Delorme, A. Boccaletti, M. Bonnefoy, A. -L. Maire, D. Mesa, G. Chauvin, S. Desidera, A. Vigan, A. Cheetham, J. Hagelberg, M. Feldt, M. Meyer, P. Rubini, H. Le Coroller, F. Cantalloube, B. Biller, M. Bonavita, T. Bhowmik, W. Brandner, S. Daemgen, V. D'Orazi, O. Flasseur , et al. (96 additional authors not shown)

Abstract: Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to… ▽ More Over the past decades, direct imaging has confirmed the existence of substellar companions (exoplanets or brown dwarfs) on wide orbits (>10 au) from their host stars. To understand their formation and evolution mechanisms, we have initiated in 2015 the SPHERE infrared survey for exoplanets (SHINE), a systematic direct imaging survey of young, nearby stars to explore their demographics.} {We aim to detect and characterize the population of giant planets and brown dwarfs beyond the snow line around young, nearby stars. Combined with the survey completeness, our observations offer the opportunity to constrain the statistical properties (occurrence, mass and orbital distributions, dependency on the stellar mass) of these young giant planets.} {In this study, we present the observing and data analysis strategy, the ranking process of the detected candidates, and the survey performances for a subsample of 150 stars, which are representative of the full SHINE sample. The observations were conducted in an homogeneous way from February 2015 to February 2017 with the dedicated ground-based VLT/SPHERE instrument equipped with the IFS integral field spectrograph and the IRDIS dual-band imager covering a spectral range between 0.9 and 2.3 $μ$m. We used coronographic, angular and spectral differential imaging techniques to reach the best detection performances for this study down to the planetary mass regime.} △ Less

Submitted 5 March, 2021; originally announced March 2021.

Journal ref: A&A 651, A71 (2021)

The focal-plane assisted pyramid wavefront sensor: enabling frame-by-frame optical gains tracking

Authors: Vincent Chambouleyron, Olivier Fauvarque, Jean-François Sauvage, Benoît Neichel, Thierry Fusco

Abstract: With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive… ▽ More With its high sensitivity, the Pyramid wavefront sensor (PyWFS) is becoming an advantageous sensor for astronomical adaptive optics (AO) systems. However, this sensor exhibits significant non-linear behaviours leading to challenging AO control issues. In order to mitigate these effects, we propose to use, in addition to the classical pyramid sensor, a focal plane image combined with a convolutive description of the sensor to perform a fast tracking of the PyWFS non-linearities, the so-called optical gains (OG). We show that this additional focal plane imaging path only requires a small fraction of the total flux, while representing a robust solution to estimate the PyWFS OG. Finally, we demonstrate the gain brought by our method with the specific examples of bootstrap and Non-Common Path Aberrations (NCPA) handling. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Journal ref: A&A 649, A70 (2021)

Optical design trade-off study for the AO module of MAVIS

Authors: Davide Greggio, Simone Di Filippo, Demetrio Magrin, Christian Schwab, Valentina Viotto, Lorenzo Busoni, Simone Esposito, Roberto Ragazzoni, Thierry Fusco, Neichel Benoit, Enrico Pinna, Francois Rigaut, Carmelo Arcidiacono, Maria Bergomi, Federico Biondi, Simonetta Chinellato, Jacopo Farinato, Luca Marafatto, Elisa Portaluri, Kalyan Radhakrishnan, Daniele Vassallo

Abstract: MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advanta… ▽ More MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advantage of the already operational Adaptive Optics Facility that consists of 4 LGS and an adaptive secondary mirror with 1170 actuators. In addition, two post-focal deformable mirrors and 3 Natural Guide Stars (NGS) are foreseen for the tomographic reconstruction and correction of atmospheric turbulence. The MAVIS AO module is intended to feed both an imager and a spectrograph that will take advantage of the increased resolution and depth with respect to current instrumentation. In this paper we present the trade-off study for the optical design of the MAVIS AO module, highlighting the peculiarities of the system and the requirements imposed by AO. We propose a set of possible optical solutions able to provide a compact and efficient implementation of the different subsystems and we compare them in terms of delivered optical quality, overall throughput, encumbrance, ease of alignment and residual distortion. △ Less

Submitted 27 January, 2021; originally announced January 2021.

Comments: 9 pages, 3 figures, AO4ELT6 conference proceedings, http://ao4elt6.copl.ulaval.ca/proceedings.html

INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test

Authors: Simone Di Filippo, Davide Greggio, Maria Bergomi, Kalyan Radhakrishnan, Elisa Portaluri, Valentina Viotto, Carmelo Arcidiacono, Demetrio Magrin, Luca Marafatto, Marco Dima, Roberto Ragazzoni, Pierre Janin-Potiron, Lauren Schatz, Benoit Neichel, Olivier Fauvarque, Thierry Fusco

Abstract: The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-sha… ▽ More The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comments: 6 pages, 8 figures, AO4ELT6 conference proceeding, http://ao4elt6.copl.ulaval.ca/proceedings.html

TIPTOP: a new tool to efficiently predict your favorite AO PSF

Authors: Benoit Neichel, Olivier Beltramo-Martin, Cedric Plantet, Fabio Rossi, Guido Agapito, Thierry Fusco, Elena Carolo, Giulia Carla, Michele Cirasuolo, Remco van der Burg

Abstract: The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCA… ▽ More The Adaptive Optics (AO) performance significantly depends on the available Natural Guide Stars (NGSs) and a wide range of atmospheric conditions (seeing, Cn2, windspeed,...). In order to be able to easily predict the AO performance, we have developed a fast algorithm - called TIPTOP - producing the expected AO Point Spread Function (PSF) for any of the existing AO observing modes (SCAO, LTAO, MCAO, GLAO), and any atmospheric conditions. This TIPTOP tool takes its roots in an analytical approach, where the simulations are done in the Fourier domain. This allows to reach a very fast computation time (few seconds per PSF), and efficiently explore the wide parameter space. TIPTOP has been developed in Python, taking advantage of previous work developed in different languages, and unifying them in a single framework. The TIPTOP app is available on GitHub at: https://github.com/FabioRossiArcetri/TIPTOP, and will serve as one of the bricks for the ELT Exposure Time Calculator. △ Less

Submitted 16 January, 2021; originally announced January 2021.

Comments: Proceeding of SPIE 2020

MAVIS: system modelling and performance prediction

Authors: Guido Agapito, Daniele Vassallo, Cedric Plantet, Valentina Viotto, Enrico Pinna, Benoit Neichel, Thierry Fusco, Francois Rigaut

Abstract: The MCAO Assisted Visible Imager and Spectrograph (MAVIS) Adaptive Optics Module has very demanding goals to support science in the optical: providing 15% SR in V band on a large FoV of 30arcsec diameter in standard atmospheric conditions at Paranal. It will be able to work in closed loop on up to three natural guide stars down to H=19, providing a sky coverage larger than 50% in the south galacti… ▽ More The MCAO Assisted Visible Imager and Spectrograph (MAVIS) Adaptive Optics Module has very demanding goals to support science in the optical: providing 15% SR in V band on a large FoV of 30arcsec diameter in standard atmospheric conditions at Paranal. It will be able to work in closed loop on up to three natural guide stars down to H=19, providing a sky coverage larger than 50% in the south galactic pole. Such goals and the exploration of a large MCAO system parameters space have required a combination of analytical and end- to-end simulations to assess performance, sky coverage and drive the design. In this work we report baseline performance, statistical sky coverage and parameters sensitivity analysis done in the phase-A instrument study. △ Less

Submitted 28 December, 2020; originally announced December 2020.

Comments: 12 pages, 9 figures, 7 tables. SPIE conference Astronomical Telescopes and Instrumentation, 14 - 18 December 2020, digital forum

Journal ref: Proc. SPIE Vol. 11448 (2020)

MOSAIC: the high-multiplex and multi-IFU spectrograph for the ELT

Authors: Rubén Sánchez-Janssen, Francois Hammer, Simon Morris, Jean-Gabriel Cuby, Lex Kaper, Matthias Steinmetz, Jose Afonso, Beatriz Barbuy, Edwin Bergin, Alexis Finoguenov, Jesús Gallego, Susan Kassin, Christopher Miller, Goran Östlin, Laura Pentericci, Daniel Schaerer, Bodo Ziegler, Fanny Chemla, Gavin Dalton, Fatima De Frondat, Chris Evans, David Le Mignant, Mathieu Puech, Myriam Rodrigues, Sylvestre Taburet , et al. (18 additional authors not shown)

Abstract: MOSAIC is the planned multi-object spectrograph for the 39m Extremely Large Telescope (ELT). Conceived as a multi-purpose instrument, it offers both high multiplex and multi-IFU capabilities at a range of intermediate to high spectral resolving powers in the visible and the near-infrared. MOSAIC will enable unique spectroscopic surveys of the faintest sources, from the oldest stars in the Galaxy a… ▽ More MOSAIC is the planned multi-object spectrograph for the 39m Extremely Large Telescope (ELT). Conceived as a multi-purpose instrument, it offers both high multiplex and multi-IFU capabilities at a range of intermediate to high spectral resolving powers in the visible and the near-infrared. MOSAIC will enable unique spectroscopic surveys of the faintest sources, from the oldest stars in the Galaxy and beyond to the first populations of galaxies that completed the reionisation of the Universe--while simultaneously opening up a wide discovery space. In this contribution we present the status of the instrument ahead of Phase B, showcasing the key science cases as well as introducing the updated set of top level requirements and the adopted architecture. The high readiness level will allow MOSAIC to soon enter the construction phase, with the goal to provide the ELT community with a world-class MOS capability as soon as possible after the telescope first light. △ Less

Submitted 15 December, 2020; originally announced December 2020.

Comments: Accepted to SPIE

Operational forecast of the PSF figures of merit

Authors: A. Turchi, G. Agapito, E. Masciadri, O. Beltramo-Martin, E. Pinna, J. F. Sauvage, T. Fusco, B. Neichel, J. Milli

Abstract: The optimization and scheduling of scientific observations done with instrumentation supported by adaptive optics could greatly benefit from the forecast of PSF figures of merit (FWHM, Strehl Ratio, Encircle Energy and contrast), that depend on the AO instrument, the scientific target and turbulence conditions during the observing night. In this contribution we explore the the possibility to forec… ▽ More The optimization and scheduling of scientific observations done with instrumentation supported by adaptive optics could greatly benefit from the forecast of PSF figures of merit (FWHM, Strehl Ratio, Encircle Energy and contrast), that depend on the AO instrument, the scientific target and turbulence conditions during the observing night. In this contribution we explore the the possibility to forecast a few among the most useful PSF figures of merit (SR and FWHM). To achieve this goal, we use the optical turbulence forecasted by the mesoscale atmospheric model Astro-Meso-NH on a short timescale as an input for PSF simulation software developed and tailored for specific AO instruments. A preliminary validation will be performed by comparing the results with on-sky measured PSF figures of merit obtained on specific targets using the SCAO systems SOUL (FLAO upgrade) feeding the camera LUCI at LBT and SAXO, the extreme SCAO system feeding the high resolution SPHERE instrument at VLT. This study will pave the way to the implementation of an operational forecasts of such a figure of merits on the base of existing operational forecast system of the atmosphere (turbulence and atmospheric parameters). In this contribution we focus our attention on the forecast of the PSF on-axis. △ Less

Submitted 14 December, 2020; originally announced December 2020.

Comments: 9 pages, 3 figures, 2 tables

Journal ref: Proceedings of the SPIE, Volume 11448, id. 114483V (2020)

Characterisation of a turbulent module for the MITHIC high-contrast imaging testbed

Authors: A. Vigan, M. Postnikova, A. Caillat, J. -F. Sauvage, K. Dohlen, K. El Hadi, T. Fusco, M. Lamb, M. N'Diaye

Abstract: Future high-contrast imagers on ground-based extremely large telescopes will have to deal with the segmentation of the primary mirrors. Residual phase errors coming from the phase steps at the edges of the segments will have to be minimized in order to reach the highest possible wavefront correction and thus the best contrast performance. To study these effects, we have developed the MITHIC high-c… ▽ More Future high-contrast imagers on ground-based extremely large telescopes will have to deal with the segmentation of the primary mirrors. Residual phase errors coming from the phase steps at the edges of the segments will have to be minimized in order to reach the highest possible wavefront correction and thus the best contrast performance. To study these effects, we have developed the MITHIC high-contrast testbed, which is designed to test various strategies for wavefront sensing, including the Zernike sensor for Extremely accurate measurements of Low-level Differential Aberrations (ZELDA) and COronagraphic Focal-plane wave-Front Estimation for Exoplanet detection (COFFEE). We recently equipped the bench with a new atmospheric turbulence simulation module that offers both static phase patterns representing segmented primary mirrors and continuous phase strips representing atmospheric turbulence filtered by an AO or an XAO system. We present a characterisation of the module using different instruments and wavefront sensors, and the first coronagraphic measurements obtained on MITHIC. △ Less

Submitted 6 December, 2020; originally announced December 2020.

Comments: Presented at SPIE Astronomical Instrumentation + Telescope 2016

Journal ref: Proceedings of the SPIE, Volume 9909, id. 99093F 13 pp. (2016)

A single-armed spiral in the protoplanetary disk around HD34282 ?

Authors: J. de Boer, C. Ginski, G. Chauvin, F. Menard, M. Benisty, C. Dominik, K. Maaskant, J. H. Girard, G. van der Plas, A. Garufi, C. Perrot, T. Stolker, H. Avenhaus, A. Bohn, A. Delboulbe, M. Jaquet, T. Buey, O. Moller-Nilsson, J. Pragt, T. Fusco

Abstract: During the evolution of protoplanetary disks into planetary systems we expect to detect signatures that trace mechanisms such as planet-disk interaction. Protoplanetary disks display a large variety of structures in recently published high-spatial resolution images. However, the three-dimensional morphology of these disks is often difficult to infer from the two-dimensional projected images we obs… ▽ More During the evolution of protoplanetary disks into planetary systems we expect to detect signatures that trace mechanisms such as planet-disk interaction. Protoplanetary disks display a large variety of structures in recently published high-spatial resolution images. However, the three-dimensional morphology of these disks is often difficult to infer from the two-dimensional projected images we observe. We spatially resolve the disk around HD 34282 using VLT/SPHERE in polarimetric imaging mode. We retrieve a profile for the height of the scattering surface to create a height-corrected deprojection, which simulates a face-on orientation. The disk displays a complex scattering surface. An inner clearing or cavity extending up to r<0.28" (88 au) is surrounded by a bright inclined (i = 56 deg) ring with a position angle of 119 deg. The center of this ring is offset from the star along the minor axis with 0.07", which can be explained with a disk-height of 26 au above the mid-plane. Outside this ring, beyond its south-eastern ansa we detect an azimuthal asymmetry or blob at r ~ 0.4". At larger separation, we detect an outer disk structure that can be fitted with an ellipse, compatible with a circular ring seen at r = 0.62" (190 au) and height of 77 au. After applying a height-corrected deprojection we see a circular ring centered on the star at 88 au, while what seemed to be a separate blob and outer ring, now both could be part of a single-armed spiral. Based on the current data it is not possible to conclude decisively whether $H_{\rm scat} / r$ remains constant or whether the surface is flared with at most $H_{\rm scat} \propto r^{1.35}$ , although we favor the constant ratio based on our deprojections. The height-corrected deprojection allows a more detailed interpretation of the observed structures, after which we discern the detection of a single-armed spiral. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: 10 pages, 8 figures, accepted for publication by A&A

Journal ref: A&A 649, A25 (2021)

Joint estimation of atmospheric and instrumental defects using a parsimonious point spread function model.On-sky validation using state of the art worldwide adaptive-optics assisted instruments

Authors: Olivier Beltramo-Martin, Romain Fétick, Benoit Neichel, Thierry Fusco

Abstract: Modeling the optical point spread function (PSF) is particularly challenging for adaptive optics (AO)-assisted observations owing to the its complex shape and spatial variations. We aim to (i) exhaustively demonstrate the accuracy of a recent analytical model from comparison with a large sample of imaged PSFs, (ii) assess the conditions for which the model is optimal, and (iii) unleash the strengt… ▽ More Modeling the optical point spread function (PSF) is particularly challenging for adaptive optics (AO)-assisted observations owing to the its complex shape and spatial variations. We aim to (i) exhaustively demonstrate the accuracy of a recent analytical model from comparison with a large sample of imaged PSFs, (ii) assess the conditions for which the model is optimal, and (iii) unleash the strength of this framework to enable the joint estimation of atmospheric parameters, AO performance and static aberrations. We gathered 4812 on-sky PSFs obtained from seven AO systems and used the same fitting algorithm to test the model on various AO PSFs and diagnose AO performance from the model outputs. Finally, we highlight how this framework enables the characterization of the so-called low wind effect on the SPHERE instrument and piston cophasing errors on the Keck II telescope. Over 4812 PSFs, the model reaches down to 4% of error on both the Strehl-ratio (SR) and full width at half maximum (FWHM). We particularly illustrate that the estimation of the Fried parameter, which is one of the model parameters, is consistent with known seeing statistics and follows expected trends in wavelength using the MUSE instrument ($λ^{6/5}$) and field (no variations) from GSAOI images with a standard deviation of 0.4cm. Finally, we show that we can retrieve a combination of differential piston, tip, and tilt modes introduced by the LWE that compares to ZELDA measurements, as well as segment piston errors from the Keck II telescope and particularly the stair mode that has already been revealed from previous studies. This model matches all types of AO PSFs at the level of 4% error and can be used for AO diagnosis, post-processing, and wavefront sensing purposes. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Binary asteroid (31) Euphrosyne: Ice-rich and nearly spherical

Authors: B. Yang, J. Hanus, B. Carry, P. Vernazza, M. Broz, F. Vachier, N. Rambaux, M. Marsset, O. Chrenko, P. Sevecek, M. Viikinkoski, E. Jehin, M. Ferrais, E. Podlewska Gaca, A. Drouard, F. Marchis, M. Birlan, Z. Benkhaldoun, J. Berthier, P. Bartczak, C. Dumas, G. Dudzinski, J. Durech, J. Castillo-Rogez, F. Cipriani , et al. (16 additional authors not shown)

Abstract: Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain… ▽ More Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and the Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. The goals of this adaptive-optics imaging study were threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at ESO's 8.2-m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D-shape using the adam shape modeling algorithm based on the SPHERE images and the available lightcurves of this asteroid. We analyzed the dynamics of the satellite with the genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne's diameter is 268+/-6 km, making it one of the top 10 largest main belt asteroids. We detected a satellite of Euphrosyne -- S/2019 (31) 1-- that is about 4 km across, on an circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665+/-242 kg/m^3, suggesting that Euphrosyne probably contain a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from the ones suggested by fluid hydrostatic equilibrium following reaccumulation. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: 12 pages, 6 figures, accepted to be published in A&A

Journal ref: A&A 641, A80 (2020)

The SPHERE infrared survey for exoplanets (SHINE). III. The demographics of young giant exoplanets below 300 au with SPHERE

Authors: A. Vigan, C. Fontanive, M. Meyer, B. Biller, M. Bonavita, M. Feldt, S. Desidera, G. -D. Marleau, A. Emsenhuber, R. Galicher, K. Rice, D. Forgan, C. Mordasini, R. Gratton, H. Le Coroller, A. -L. Maire, F. Cantalloube, G. Chauvin, A. Cheetham, J. Hagelberg, A. -M. Lagrange, M. Langlois, M. Bonnefoy, J. -L. Beuzit, A. Boccaletti , et al. (86 additional authors not shown)

Abstract: The SHINE project is a 500-star survey performed with SPHERE on the VLT for the purpose of directly detecting new substellar companions and understanding their formation and early evolution. Here we present an initial statistical analysis for a subsample of 150 stars that are representative of the full SHINE sample. Our goal is to constrain the frequency of substellar companions with masses betwee… ▽ More The SHINE project is a 500-star survey performed with SPHERE on the VLT for the purpose of directly detecting new substellar companions and understanding their formation and early evolution. Here we present an initial statistical analysis for a subsample of 150 stars that are representative of the full SHINE sample. Our goal is to constrain the frequency of substellar companions with masses between 1 and 75 MJup and semimajor axes between 5 and 300 au. We adopt detection limits as a function of angular separation from the survey data for all stars converted into mass and projected orbital separation using the BEX-COND-hot evolutionary tracks and known distance to each system. Based on the results obtained for each star and on the 13 detections in the sample, we use a MCMC tool to compare our observations to two different types of models. The first is a parametric model based on observational constraints, and the second type are numerical models that combine advanced core accretion and gravitational instability planet population synthesis. Using the parametric model, we show that the frequencies of systems with at least one substellar companion are $23.0_{-9.7}^{+13.5}\%$, $5.8_{-2.8}^{+4.7}\%$, and $12.6_{-7.1}^{+12.9}\%$ for BA, FGK, and M stars, respectively. We also demonstrate that a planet-like formation pathway probably dominates the mass range from 1-75 MJup for companions around BA stars, while for M dwarfs, brown dwarf binaries dominate detections. In contrast, a combination of binary star-like and planet-like formation is required to best fit the observations for FGK stars. Using our population model and restricting our sample to FGK stars, we derive a frequency of $5.7_{-2.8}^{+3.8}\%$, consistent with predictions from the parametric model. More generally, the frequency values that we derive are in excellent agreement with values obtained in previous studies. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: 24 pages, 14 figures, 3 tables. Accepted for publication in A&A

Journal ref: A&A 651, A72 (2021)

Experimental validation of coronagraphic focal-plane wavefront sensing for future segmented space telescopes

Authors: Lucie Leboulleux, Jean-François Sauvage, Rémi Soummer, Thierry Fusco, Laurent Pueyo, Laurent M. Mugnier, Christopher Moriarty, Peter Petrone, Keira Brooks

Abstract: Direct imaging of Earth-like planets from space requires dedicated observatories, combining large segmented apertures with instruments and techniques such as coronagraphs, wavefront sensors, and wavefront control in order to reach the high contrast of 10^10 that is required. The complexity of these systems would be increased by the segmentation of the primary mirror, which allows for the larger di… ▽ More Direct imaging of Earth-like planets from space requires dedicated observatories, combining large segmented apertures with instruments and techniques such as coronagraphs, wavefront sensors, and wavefront control in order to reach the high contrast of 10^10 that is required. The complexity of these systems would be increased by the segmentation of the primary mirror, which allows for the larger diameters necessary to image Earth-like planets but also introduces specific patterns in the image due to the pupil shape and segmentation and making high-contrast imaging more challenging. Among these defects, the phasing errors of the primary mirror are a strong limitation to the performance. In this paper, we focus on the wavefront sensing of segment phasing errors for a high-contrast system, using the COronagraphic Focal plane wave-Front Estimation for Exoplanet detection (COFFEE) technique. We implemented and tested COFFEE on the High-contrast imaging for Complex Aperture Telescopes (HiCAT) testbed, in a configuration without any coronagraph and with a classical Lyot coronagraph, to reconstruct errors applied on a 37 segment mirror. We analysed the quality and limitations of the reconstructions. We demonstrate that COFFEE is able to estimate correctly the phasing errors of a segmented telescope for piston, tip, and tilt aberrations of typically 100nm RMS. We also identified the limitations of COFFEE for the reconstruction of low-order wavefront modes, which are highly filtered by the coronagraph. This is illustrated using two focal plane mask sizes on HiCAT. We discuss possible solutions, both in the hardware system and in the COFFEE optimizer, to mitigate these issues. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Comments: 12 pages, 15 figures, Astronomy & Astrophysics

Blind deconvolution in astronomy with adaptive optics: the parametric marginal approach

Authors: Romain Fétick, Laurent Mugnier, Thierry Fusco, Benoit Neichel

Abstract: One of the major limitations of adaptive optics (AO) corrected image post-processing is the lack of knowledge on the system point spread function (PSF). The PSF is not always available as a direct imaging on isolated point like objects such as stars. Its prediction using AO telemetry also suffers from serious limitations and requires complex and yet not fully operational algorithms. A very attract… ▽ More One of the major limitations of adaptive optics (AO) corrected image post-processing is the lack of knowledge on the system point spread function (PSF). The PSF is not always available as a direct imaging on isolated point like objects such as stars. Its prediction using AO telemetry also suffers from serious limitations and requires complex and yet not fully operational algorithms. A very attractive solution consists in a direct PSF estimation using the scientific images themselves thanks to blind or myopic post-processing approaches. We demonstrate that such approaches suffer from severe limitations when a joint restitution of object and PSF parameters is performed. As an alternative we propose here a marginalized PSF identification that overcomes this limitation. Then the PSF is used for image post-processing. Here we focus on deconvolution, a post-processing technique to restore the object, given the image and the PSF. We show that the PSF estimated by marginalisation provides good quality deconvolution. The full process of marginalized PSF estimation and deconvolution constitutes a successful blind deconvolution technique. It is tested on simulated data to measure its performance. It is also tested on experimental adaptive optics images of the asteroid 4-Vesta by VLT/SPHERE/Zimpol to demonstrate application to on-sky data. △ Less

Submitted 19 June, 2020; originally announced June 2020.

Pyramid wavefront sensor optical gains compensation using a convolutional model

Authors: Vincent Chambouleyron, Olivier Fauvarque, Pierre Janin-Potiron, Carlos Correia, Jean-François Sauvage, Noah Schwartz, Benoît Neichel, Thierry Fusco

Abstract: Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a re… ▽ More Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS. △ Less

Submitted 15 July, 2020; v1 submitted 15 June, 2020; originally announced June 2020.

Journal ref: A&A 644, A6 (2020)

K-Stacker, an algorithm to hack the orbital parameters of planets hidden in high-contrast imaging. First applications to VLT SPHERE multi-epoch observations

Authors: H. Le Coroller, M. Nowak, P. Delorme, G. Chauvin, R. Gratton, M. Devinat, J. Bec-Canet, A. Schneeberger, D. Estevez, L. Arnold, H. Beust, M. Bonnefoy, A. Boccaletti, C. Desgrange, S. Desidera, R. Galicher, A. M. Lagrange, M. Langlois, A. L. Maire, F. Menard, P. Vernazza, A. Vigan, A. Zurlo, T. Fenouillet, J. C. Lambert , et al. (18 additional authors not shown)

Abstract: Recent high-contrast imaging surveys, looking for planets in young, nearby systems showed evidence of a small number of giant planets at relatively large separation beyond typically 20 au where those surveys are the most sensitive. Access to smaller physical separations between 5 and 20 au is the next step for future planet imagers on 10 m telescopes and ELTs in order to bridge the gap with indire… ▽ More Recent high-contrast imaging surveys, looking for planets in young, nearby systems showed evidence of a small number of giant planets at relatively large separation beyond typically 20 au where those surveys are the most sensitive. Access to smaller physical separations between 5 and 20 au is the next step for future planet imagers on 10 m telescopes and ELTs in order to bridge the gap with indirect techniques (radial velocity, transit, astrometry with Gaia). In that context, we recently proposed a new algorithm, Keplerian-Stacker, combining multiple observations acquired at different epochs and taking into account the orbital motion of a potential planet present in the images to boost the ultimate detection limit. We showed that this algorithm is able to find planets in time series of simulated images of SPHERE even when a planet remains undetected at one epoch. Here, we validate the K-Stacker algorithm performances on real SPHERE datasets, to demonstrate its resilience to instrumental speckles and the gain offered in terms of true detection. This will motivate future dedicated multi-epoch observation campaigns in high-contrast imaging to search for planets in emitted and reflected light. Results. We show that K-Stacker achieves high success rate when the SNR of the planet in the stacked image reaches 7. The improvement of the SNR ratio goes as the square root of the total exposure time. During the blind test and the redetection of HD 95086 b, and betaPic b, we highlight the ability of K-Stacker to find orbital solutions consistent with the ones derived by the state of the art MCMC orbital fitting techniques, confirming that in addition to the detection gain, K-Stacker offers the opportunity to characterize the most probable orbital solutions of the exoplanets recovered at low signal to noise. △ Less

Submitted 27 April, 2020; originally announced April 2020.

Comments: Astronomy & Astrophysics accepted, 13 Pages, 11 Figures

Journal ref: A&A 639, A113 (2020)

Searching for the near infrared counterpart of Proxima c using multi-epoch high contrast SPHERE data at VLT

Authors: R. Gratton, A. Zurlo, H. Le Coroller, M. Damasso, F. Del Sordo, M. Langlois, D. Mesa, J. Milli, G. Chauvin, S. Desidera, J. Hagelberg, E. Lagadec, A. Vigan, A. Boccaletti, M. Bonnefoy, W. Brandner, S. Brown, F. Cantalloube, P. Delorme, V. D'Orazi, M. Feldt, R. Galicher, T. Henning, M. Janson, P. Kervella , et al. (21 additional authors not shown)

Abstract: Proxima Centauri is known to host an earth-like planet in its habitable zone; very recently a second candidate planet was proposed based on radial velocities. At quadrature, the expected projected separation of this new candidate is larger than 1 arcsec, making it a potentially interesting target for direct imaging. While difficult, identification of the optical counterpart of this planet would al… ▽ More Proxima Centauri is known to host an earth-like planet in its habitable zone; very recently a second candidate planet was proposed based on radial velocities. At quadrature, the expected projected separation of this new candidate is larger than 1 arcsec, making it a potentially interesting target for direct imaging. While difficult, identification of the optical counterpart of this planet would allow detailed characterization of the closest planetary system. We searched for a counterpart in SPHERE images acquired during four years through the SHINE survey. In order to account for the large orbital motion of the planet, we used a method that assumes the circular orbit obtained from radial velocities and exploits the sequence of observations acquired close to quadrature in the orbit. We checked this with a more general approach that considers keplerian motion, K-stacker. We did not obtain a clear detection. The best candidate has S/N=6.1 in the combined image. A statistical test suggests that the probability that this detection is due to random fluctuation of noise is < 1% but this result depends on the assumption that distribution of noise is uniform over the image. The position of this candidate and the orientation of its orbital plane fit well with observations in the ALMA 12m array image. However, the astrometric signal expected from the orbit of the candidate we detected is 3-sigma away from the astrometric motion of Proxima as measured from early Gaia data. This, together with the unexpectedly high flux associated with our direct imaging detection, means we cannot confirm that our candidate is indeed Proxima c. On the other hand, if confirmed, this would be the first observation in imaging of a planet discovered from radial velocities and the second one (after Fomalhaut b) of reflecting circumplanetary material. Further confirmation observations should be done as soon as possible. △ Less

Submitted 14 April, 2020; originally announced April 2020.

Comments: 14 pages, 5 figures. Accepted for publication on Astronomy and Astrophysics

Journal ref: A&A 638, A120 (2020)

Limitations imposed by optical turbulence profile structure and evolution on tomographic reconstruction for the ELT

Authors: O. J. D. Farley, J. Osborn, T. Morris, T. Fusco, B. Neichel, C. Correia, R. W. Wilson

Abstract: The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These… ▽ More The performance of tomographic adaptive optics systems is intrinsically linked to the vertical profile of optical turbulence. Firstly, a sufficient number of discrete turbulent layers must be reconstructed to model the true continuous turbulence profile. Secondly over the course of an observation, the profile as seen by the telescope changes and the tomographic reconstructor must be updated. These changes can be due to the unpredictable evolution of turbulent layers on meteorological timescales as short as minutes. Here we investigate the effect of changing atmospheric conditions on the quality of tomographic reconstruction by coupling fast analytical adaptive optics simulation to a large database of 10 691 high resolution turbulence profiles measured over two years by the Stereo-SCIDAR instrument at ESO Paranal, Chile. This work represents the first investigation of these effects with a large, statistically significant sample of turbulence profiles. The statistical nature of the study allows us to assess not only the degradation and variability in tomographic error with a set of system parameters (e.g. number of layers, temporal update period) but also the required parameters to meet some error threshold. In the most challenging conditions where the profile is rapidly changing, these parameters must be far more tightly constrained in order to meet this threshold. By providing estimates of these constraints for a wide range of system geometries as well as the impact of different temporal optimisation strategies we may assist the designers of tomographic AO for the ELT to dimension their systems. △ Less

Submitted 17 March, 2020; originally announced March 2020.

Comments: 13 pages, 13 figures. Accepted MNRAS March 2020

Design of the HARMONI Pyramid WFS module

Authors: Noah Schwartz, Jean-François Sauvage, Edgard Renault, Carlos Correia, Benoit Neichel, Thierry Fusco, Kjetil Dohlen, Kacem El Hadi, Cyril Petit, Elodie Choquet, Vincent Chambouleyron, Jerome Paufique, Fraser Clarke, Niranjan Thatte, Ian Bryson

Abstract: Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to s… ▽ More Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS. △ Less

Submitted 13 March, 2020; originally announced March 2020.

Comments: 12 pages, 17 figures, AO4ELT6 Proceedings, Adaptive Optics for Extremely Large Telescopes 6, Conference Proceeding, Québec City, Canada, Spain, June 9-14, 2019