-
Euclid. I. Overview of the Euclid mission
Authors:
Euclid Collaboration,
Y. Mellier,
Abdurro'uf,
J. A. Acevedo Barroso,
A. Achúcarro,
J. Adamek,
R. Adam,
G. E. Addison,
N. Aghanim,
M. Aguena,
V. Ajani,
Y. Akrami,
A. Al-Bahlawan,
A. Alavi,
I. S. Albuquerque,
G. Alestas,
G. Alguero,
A. Allaoui,
S. W. Allen,
V. Allevato,
A. V. Alonso-Tetilla,
B. Altieri,
A. Alvarez-Candal,
A. Amara,
L. Amendola
, et al. (1086 additional authors not shown)
Abstract:
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14…
▽ More
The current standard model of cosmology successfully describes a variety of measurements, but the nature of its main ingredients, dark matter and dark energy, remains unknown. Euclid is a medium-class mission in the Cosmic Vision 2015-2025 programme of the European Space Agency (ESA) that will provide high-resolution optical imaging, as well as near-infrared imaging and spectroscopy, over about 14,000 deg^2 of extragalactic sky. In addition to accurate weak lensing and clustering measurements that probe structure formation over half of the age of the Universe, its primary probes for cosmology, these exquisite data will enable a wide range of science. This paper provides a high-level overview of the mission, summarising the survey characteristics, the various data-processing steps, and data products. We also highlight the main science objectives and expected performance.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Euclid preparation. Sensitivity to neutrino parameters
Authors:
Euclid Collaboration,
M. Archidiacono,
J. Lesgourgues,
S. Casas,
S. Pamuk,
N. Schöneberg,
Z. Sakr,
G. Parimbelli,
A. Schneider,
F. Hervas Peters,
F. Pace,
V. M. Sabarish,
M. Costanzi,
S. Camera,
C. Carbone,
S. Clesse,
N. Frusciante,
A. Fumagalli,
P. Monaco,
D. Scott,
M. Viel,
A. Amara,
S. Andreon,
N. Auricchio,
M. Baldi
, et al. (224 additional authors not shown)
Abstract:
The Euclid mission of the European Space Agency will deliver weak gravitational lensing and galaxy clustering surveys that can be used to constrain the standard cosmological model and extensions thereof. We present forecasts from the combination of these surveys on the sensitivity to cosmological parameters including the summed neutrino mass $M_ν$ and the effective number of relativistic species…
▽ More
The Euclid mission of the European Space Agency will deliver weak gravitational lensing and galaxy clustering surveys that can be used to constrain the standard cosmological model and extensions thereof. We present forecasts from the combination of these surveys on the sensitivity to cosmological parameters including the summed neutrino mass $M_ν$ and the effective number of relativistic species $N_{\rm eff}$ in the standard $Λ$CDM scenario and in a scenario with dynamical dark energy ($w_0 w_a$CDM). We compare the accuracy of different algorithms predicting the nonlinear matter power spectrum for such models. We then validate several pipelines for Fisher matrix and MCMC forecasts, using different theory codes, algorithms for numerical derivatives, and assumptions concerning the non-linear cut-off scale. The Euclid primary probes alone will reach a sensitivity of $σ(M_ν)=$56meV in the $Λ$CDM+$M_ν$ model, whereas the combination with CMB data from Planck is expected to achieve $σ(M_ν)=$23meV and raise the evidence for a non-zero neutrino mass to at least the $2.6σ$ level. This can be pushed to a $4σ$ detection if future CMB data from LiteBIRD and CMB Stage-IV are included. In combination with Planck, Euclid will also deliver tight constraints on $ΔN_{\rm eff}< 0.144$ (95%CL) in the $Λ$CDM+$M_ν$+$N_{\rm eff}$ model, or $ΔN_{\rm eff}< 0.063$ when future CMB data are included. When floating $(w_0, w_a)$, we find that the sensitivity to $N_{\rm eff}$ remains stable, while that to $M_ν$ degrades at most by a factor 2. This work illustrates the complementarity between the Euclid spectroscopic and imaging/photometric surveys and between Euclid and CMB constraints. Euclid will have a great potential for measuring the neutrino mass and excluding well-motivated scenarios with additional relativistic particles.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Numerical validation of an adaptive model for the determination of nonlinear-flow regions in highly heterogeneous porous media
Authors:
Alessio Fumagalli,
Francesco S. Patacchini
Abstract:
An adaptive model for the description of flows in highly heterogeneous porous media is developed in~\cite{FP21,FP23}. There, depending on the magnitude of the fluid's velocity, the constitutive law linking velocity and pressure gradient is selected between two possible options, one better adapted to slow motion and the other to fast motion. We propose here to validate further this adaptive approac…
▽ More
An adaptive model for the description of flows in highly heterogeneous porous media is developed in~\cite{FP21,FP23}. There, depending on the magnitude of the fluid's velocity, the constitutive law linking velocity and pressure gradient is selected between two possible options, one better adapted to slow motion and the other to fast motion. We propose here to validate further this adaptive approach by means of more extensive numerical experiments, including a three-dimensional case, as well as to use such approach to determine a partition of the domain into slow- and fast-flow regions.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Application of Deep Learning Reduced-Order Modeling for Single-Phase Flow in Faulted Porous Media
Authors:
Enrico Ballini,
Luca Formaggia,
Alessio Fumagalli,
Anna Scotti,
Paolo Zunino
Abstract:
We apply reduced-order modeling (ROM) techniques to single-phase flow in faulted porous media, accounting for changing rock properties and fault geometry variations using a radial basis function mesh deformation method. This approach benefits from a mixed-dimensional framework that effectively manages the resulting non-conforming mesh. To streamline complex and repetitive calculations such as sens…
▽ More
We apply reduced-order modeling (ROM) techniques to single-phase flow in faulted porous media, accounting for changing rock properties and fault geometry variations using a radial basis function mesh deformation method. This approach benefits from a mixed-dimensional framework that effectively manages the resulting non-conforming mesh. To streamline complex and repetitive calculations such as sensitivity analysis and solution of inverse problems, we utilize the Deep Learning Reduced Order Model (DL-ROM). This non-intrusive neural network-based technique is evaluated against the traditional Proper Orthogonal Decomposition (POD) method across various scenarios, demonstrating DL-ROM's capacity to expedite complex analyses with promising accuracy and efficiency.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Deep learning based reduced order modeling of Darcy flow systems with local mass conservation
Authors:
Wietse M. Boon,
Nicola R. Franco,
Alessio Fumagalli,
Paolo Zunino
Abstract:
We propose a new reduced order modeling strategy for tackling parametrized Partial Differential Equations (PDEs) with linear constraints, in particular Darcy flow systems in which the constraint is given by mass conservation. Our approach employs classical neural network architectures and supervised learning, but it is constructed in such a way that the resulting Reduced Order Model (ROM) is guara…
▽ More
We propose a new reduced order modeling strategy for tackling parametrized Partial Differential Equations (PDEs) with linear constraints, in particular Darcy flow systems in which the constraint is given by mass conservation. Our approach employs classical neural network architectures and supervised learning, but it is constructed in such a way that the resulting Reduced Order Model (ROM) is guaranteed to satisfy the linear constraints exactly. The procedure is based on a splitting of the PDE solution into a particular solution satisfying the constraint and a homogenous solution. The homogeneous solution is approximated by map** a suitable potential function, generated by a neural network model, onto the kernel of the constraint operator; for the particular solution, instead, we propose an efficient spanning tree algorithm. Starting from this paradigm, we present three approaches that follow this methodology, obtained by exploring different choices of the potential spaces: from empirical ones, derived via Proper Orthogonal Decomposition (POD), to more abstract ones based on differential complexes. All proposed approaches combine computational efficiency with rigorous mathematical interpretation, thus guaranteeing the explainability of the model outputs. To demonstrate the efficacy of the proposed strategies and to emphasize their advantages over vanilla black-box approaches, we present a series of numerical experiments on fluid flows in porous media, ranging from mixed-dimensional problems to nonlinear systems. This research lays the foundation for further exploration and development in the realm of model order reduction, potentially unlocking new capabilities and solutions in computational geosciences and beyond.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Euclid preparation. XXXIX. The effect of baryons on the Halo Mass Function
Authors:
Euclid Collaboration,
T. Castro,
S. Borgani,
M. Costanzi,
J. Dakin,
K. Dolag,
A. Fumagalli,
A. Ragagnin,
A. Saro,
A. M. C. Le Brun,
N. Aghanim,
A. Amara,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
J. Brinchmann,
S. Camera,
V. Capobianco,
C. Carbone,
J. Carretero
, et al. (198 additional authors not shown)
Abstract:
The Euclid photometric survey of galaxy clusters stands as a powerful cosmological tool, with the capacity to significantly propel our understanding of the Universe. Despite being sub-dominant to dark matter and dark energy, the baryonic component in our Universe holds substantial influence over the structure and mass of galaxy clusters. This paper presents a novel model to precisely quantify the…
▽ More
The Euclid photometric survey of galaxy clusters stands as a powerful cosmological tool, with the capacity to significantly propel our understanding of the Universe. Despite being sub-dominant to dark matter and dark energy, the baryonic component in our Universe holds substantial influence over the structure and mass of galaxy clusters. This paper presents a novel model to precisely quantify the impact of baryons on galaxy cluster virial halo masses, using the baryon fraction within a cluster as proxy for their effect. Constructed on the premise of quasi-adiabaticity, the model includes two parameters calibrated using non-radiative cosmological hydrodynamical simulations and a single large-scale simulation from the Magneticum set, which includes the physical processes driving galaxy formation. As a main result of our analysis, we demonstrate that this model delivers a remarkable one percent relative accuracy in determining the virial dark matter-only equivalent mass of galaxy clusters, starting from the corresponding total cluster mass and baryon fraction measured in hydrodynamical simulations. Furthermore, we demonstrate that this result is robust against changes in cosmological parameters and against varying the numerical implementation of the sub-resolution physical processes included in the simulations. Our work substantiates previous claims about the impact of baryons on cluster cosmology studies. In particular, we show how neglecting these effects would lead to biased cosmological constraints for a Euclid-like cluster abundance analysis. Importantly, we demonstrate that uncertainties associated with our model, arising from baryonic corrections to cluster masses, are sub-dominant when compared to the precision with which mass-observable relations will be calibrated using Euclid, as well as our current understanding of the baryon fraction within galaxy clusters.
△ Less
Submitted 16 April, 2024; v1 submitted 25 October, 2023;
originally announced November 2023.
-
Cosmological constraints from abundance, weak-lensing and clustering of galaxy clusters: application to the SDSS
Authors:
Alessandra Fumagalli,
Matteo Costanzi,
Alexandro Saro,
Tiago Castro,
Stefano Borgani
Abstract:
The clustering of galaxy clusters is a powerful cosmological tool, which can help to break degeneracies between parameters when combined with other cosmological observables. We aim to demonstrate its potential in constraining cosmological parameters and scaling relations when combined with cluster counts and weak lensing mass information, using as a case study the redMaPPer cluster catalog derived…
▽ More
The clustering of galaxy clusters is a powerful cosmological tool, which can help to break degeneracies between parameters when combined with other cosmological observables. We aim to demonstrate its potential in constraining cosmological parameters and scaling relations when combined with cluster counts and weak lensing mass information, using as a case study the redMaPPer cluster catalog derived from the Sloan Digital Sky Survey (SDSS). We extend the analysis of number counts and weak lensing signal performed by Costanzi et al. 2019a, with the addition of the real-space 2-point correlation function. We derive cosmological and scaling relation posteriors for all the possible combinations of the three observables to assess their constraining power, parameter degeneracies, and possible internal tensions. We find no evidence for tensions between the three data set analyzed. We demonstrate that the inclusion of the cluster clustering statistic can greatly enhance the constraining power of the sample thanks to its capability of breaking the $Ω_{\rm m} - σ_8$ degeneracy characteristic of cluster abundance studies. In particular, for a flat $Λ$CDM model with massive neutrinos, we obtain $Ω_{\rm m}=0.28 \pm 0.03$ and $σ_8 = 0.82 \pm 0.05$, a 33% and 50% improvement compared to the posteriors derived combining cluster abundance and weak lensing analyses. Our results are consistent with cosmological posteriors from other cluster surveys, as well as with Planck CMB results and DES-Y3 galaxy clustering and weak-lensing analysis.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
Superhorizon isocurvature fluctuations relax tensions
Authors:
Alessandra Fumagalli,
Yodovina Piškur,
Anže Slosar
Abstract:
We present a new class of models that have potential to alleviate tensions present in the cosmological data today. We postulate variation in the sound horizon scale on super-horizon scales, i.e. on scales that are larger than that of the present observable low-redshift universe ($\gtrsim 1\,$Gpc) while at the same time smaller than the largest scales probed by the cosmic microwave background (CMB)…
▽ More
We present a new class of models that have potential to alleviate tensions present in the cosmological data today. We postulate variation in the sound horizon scale on super-horizon scales, i.e. on scales that are larger than that of the present observable low-redshift universe ($\gtrsim 1\,$Gpc) while at the same time smaller than the largest scales probed by the cosmic microwave background (CMB) ($\lesssim10\,$Gpc). In this scenario, CMB peaks are naturally smoothed as preferred by the Planck data, while at the same time the low-redshift baryon acoustic oscillation calibration is partially decoupled from the CMB. Taking super-horizon variations in baryon fraction as an example and using approximate modeling, we find improvement in the best fit Planck power spectrum model $Δχ^2 \sim 6$ for one extra degree of freedom with the relevant extension parameter $10^3 σ_b = 2.12 \pm 0.50 $, implying about 10\% variations in baryon fraction across the universe. At the same time, $S_8$ drops by about 1 sigma, easing tension with weak lensing surveys. While $H_0$ increases in this model by about 1 sigma, this is insufficient to explain the Hubble tension in $Λ$CDM. Since the power of low redshift BAO is relaxed, we find that the combination of Planck 2018 data, eBOSS BAO data and Riess et al distance ladder Hubble parameter determination produce a satisfactory fit in the model with free dark energy equation of state. Such a fit, however, favors a phantom dark energy equation of state $w<-1$ at 2-3 sigma.
△ Less
Submitted 20 July, 2023; v1 submitted 24 May, 2023;
originally announced May 2023.
-
A mixed-dimensional model for direct current simulations in presence of a thin high-resistivity liner
Authors:
Alessio Fumagalli,
Lorenzo Panzeri,
Luca Formaggia,
Anna Scotti,
Diego Arosio
Abstract:
In this work we present a mixed-dimensional mathematical model to obtain the electric potential and current density in direct current simulations when a thin liner is included in the modelled domain. The liner is used in landfill management to prevent leakage of leachate from the waste body into the underground and is made of a highly-impermeable high-resistivity plastic material. The electrodes a…
▽ More
In this work we present a mixed-dimensional mathematical model to obtain the electric potential and current density in direct current simulations when a thin liner is included in the modelled domain. The liner is used in landfill management to prevent leakage of leachate from the waste body into the underground and is made of a highly-impermeable high-resistivity plastic material. The electrodes and the liner have diameters and thickness respectively that are much smaller than their other dimensions, thus their numerical simulation might be too costly in an equi-dimensional setting. Our approach is to approximate them as objects of lower dimension and derive the corresponding equations. The obtained mixed-dimensional model is validated against laboratory experiments of increasing complexity showing the reliability of the proposed mathematical model.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Mixed and multipoint finite element methods for rotation-based poroelasticity
Authors:
Wietse M. Boon,
Alessio Fumagalli,
Anna Scotti
Abstract:
This work proposes a mixed finite element method for the Biot poroelasticity equations that employs the lowest-order Raviart-Thomas finite element space for the solid displacement and piecewise constants for the fluid pressure. The method is based on the formulation of linearized elasticity as a weighted vector Laplace problem. By introducing the solid rotation and fluid flux as auxiliary variable…
▽ More
This work proposes a mixed finite element method for the Biot poroelasticity equations that employs the lowest-order Raviart-Thomas finite element space for the solid displacement and piecewise constants for the fluid pressure. The method is based on the formulation of linearized elasticity as a weighted vector Laplace problem. By introducing the solid rotation and fluid flux as auxiliary variables, we form a four-field formulation of the Biot system, which is discretized using conforming mixed finite element spaces. The auxiliary variables are subsequently removed from the system in a local hybridization technique to obtain a multipoint rotation-flux mixed finite element method. Stability and convergence of the four-field and multipoint mixed finite element methods are shown in terms of weighted norms, which additionally leads to parameter-robust preconditioners. Numerical experiments confirm the theoretical results.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Euclid preparation. XXVII. Covariance model validation for the 2-point correlation function of galaxy clusters
Authors:
Euclid Collaboration,
A. Fumagalli,
A. Saro,
S. Borgani,
T. Castro,
M. Costanzi,
P. Monaco,
E. Munari,
E. Sefusatti,
N. Aghanim,
N. Auricchio,
M. Baldi,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
J. Brinchmann,
S. Camera,
V. Capobianco,
C. Carbone,
J. Carretero,
F. J. Castander,
M. Castellano,
S. Cavuoti,
R. Cledassou
, et al. (169 additional authors not shown)
Abstract:
Aims. We validate a semi-analytical model for the covariance of real-space 2-point correlation function of galaxy clusters. Methods. Using 1000 PINOCCHIO light cones mimicking the expected Euclid sample of galaxy clusters, we calibrate a simple model to accurately describe the clustering covariance. Then, we use such a model to quantify the likelihood analysis response to variations of the covaria…
▽ More
Aims. We validate a semi-analytical model for the covariance of real-space 2-point correlation function of galaxy clusters. Methods. Using 1000 PINOCCHIO light cones mimicking the expected Euclid sample of galaxy clusters, we calibrate a simple model to accurately describe the clustering covariance. Then, we use such a model to quantify the likelihood analysis response to variations of the covariance, and investigate the impact of a cosmology-dependent matrix at the level of statistics expected for the Euclid survey of galaxy clusters. Results. We find that a Gaussian model with Poissonian shot-noise does not correctly predict the covariance of the 2-point correlation function of galaxy clusters. By introducing few additional parameters fitted from simulations, the proposed model reproduces the numerical covariance with 10 per cent accuracy, with differences of about 5 per cent on the figure of merit of the cosmological parameters $Ω_{\rm m}$ and $σ_8$. Also, we find that the cosmology-dependence of the covariance adds valuable information that is not contained in the mean value, significantly improving the constraining power of cluster clustering. Finally, we find that the cosmological figure of merit can be further improved by taking mass binning into account. Our results have significant implications for the derivation of cosmological constraints from the 2-point clustering statistics of the Euclid survey of galaxy clusters.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
Testing the accuracy of likelihoods for cluster abundance cosmology
Authors:
Constantin Payerne,
Calum Murray,
Céline Combet,
Cyrille Doux,
Alessandra Fumagalli,
Mariana Penna-Lima
Abstract:
The abundance of galaxy clusters is a sensitive probe to the amplitude of matter density fluctuations, the total amount of matter in the Universe as well as its expansion history. Inferring correct values and accurate uncertainties of cosmological parameters requires accurate knowledge of cluster abundance statistics, encoded in the likelihood function. In this paper, we test the accuracy of clust…
▽ More
The abundance of galaxy clusters is a sensitive probe to the amplitude of matter density fluctuations, the total amount of matter in the Universe as well as its expansion history. Inferring correct values and accurate uncertainties of cosmological parameters requires accurate knowledge of cluster abundance statistics, encoded in the likelihood function. In this paper, we test the accuracy of cluster abundance likelihoods used in the literature, namely the Poisson and Gaussian likelihoods as well as the more complete description of the Gauss-Poisson Compound likelihood. This is repeated for a variety of binning choices and analysis setups. In order to evaluate the accuracy of a given likelihood, this work compares individual posterior covariances to the covariance of estimators over the 1000 simulated dark matter halo catalogs obtained from PINOCCHIO algorithm. We find that for Rubin/LSST or Euclid-like surveys the Gaussian likelihood gives robust constraints over a large range of binning choices. The Poisson likelihood, that does not account for sample covariance, always underestimates the errors on the parameters, even when the sample volume is reduced or only high-mass clusters are considered. We find no benefit in using the more complex Gauss-Poisson Compound likelihood as it gives essentially the same results as the Gaussian likelihood, but at a greater computational cost. Finally, in this ideal setup, we note only a small gain on the parameter error bars when using a large number of bins in the mass-redshift plane.
△ Less
Submitted 28 February, 2023; v1 submitted 20 October, 2022;
originally announced October 2022.
-
Mixed Virtual Element approximation of linear acoustic wave equation
Authors:
Franco Dassi,
Alessio Fumagalli,
Ilario Mazzieri,
Giuseppe Vacca
Abstract:
We design a Mixed Virtual Element Method for the approximated solution to the first-order form of the acoustic wave equation. In absence of external load, the semi-discrete method exactly conserves the system energy. To integrate in time the semi-discrete problem we consider a classical theta-method scheme. We carry out the stability and convergence analysis in the energy norm for the semi-discret…
▽ More
We design a Mixed Virtual Element Method for the approximated solution to the first-order form of the acoustic wave equation. In absence of external load, the semi-discrete method exactly conserves the system energy. To integrate in time the semi-discrete problem we consider a classical theta-method scheme. We carry out the stability and convergence analysis in the energy norm for the semi-discrete problem showing optimal rate of convergence with respect to the mesh size. We further study the property of energy conservation for the fully-discrete system. Finally, we present some verification tests as well as engineering application of the method.
△ Less
Submitted 23 September, 2022;
originally announced September 2022.
-
A multipoint vorticity mixed finite element method for incompressible Stokes flow
Authors:
Wietse M. Boon,
Alessio Fumagalli
Abstract:
We propose a mixed finite element method for Stokes flow with one degree of freedom per element and facet of simplicial grids. The method is derived by considering the vorticity-velocity-pressure formulation and eliminating the vorticity locally through the use of a quadrature rule. The discrete solution is pointwise divergence-free and the method is pressure robust. The theoretically derived conv…
▽ More
We propose a mixed finite element method for Stokes flow with one degree of freedom per element and facet of simplicial grids. The method is derived by considering the vorticity-velocity-pressure formulation and eliminating the vorticity locally through the use of a quadrature rule. The discrete solution is pointwise divergence-free and the method is pressure robust. The theoretically derived convergence rates are confirmed by numerical experiments.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Euclid preparation. XXIV. Calibration of the halo mass function in $Λ(ν)$CDM cosmologies
Authors:
Euclid Collaboration,
T. Castro,
A. Fumagalli,
R. E. Angulo,
S. Bocquet,
S. Borgani,
C. Carbone,
J. Dakin,
K. Dolag,
C. Giocoli,
P. Monaco,
A. Ragagnin,
A. Saro,
E. Sefusatti,
M. Costanzi,
A. M. C. Le Brun,
P. -S. Corasaniti,
A. Amara,
L. Amendola,
M. Baldi,
R. Bender,
C. Bodendorf,
E. Branchini,
M. Brescia,
S. Camera
, et al. (157 additional authors not shown)
Abstract:
Euclid's photometric galaxy cluster survey has the potential to be a very competitive cosmological probe. The main cosmological probe with observations of clusters is their number count, within which the halo mass function (HMF) is a key theoretical quantity. We present a new calibration of the analytic HMF, at the level of accuracy and precision required for the uncertainty in this quantity to be…
▽ More
Euclid's photometric galaxy cluster survey has the potential to be a very competitive cosmological probe. The main cosmological probe with observations of clusters is their number count, within which the halo mass function (HMF) is a key theoretical quantity. We present a new calibration of the analytic HMF, at the level of accuracy and precision required for the uncertainty in this quantity to be subdominant with respect to other sources of uncertainty in recovering cosmological parameters from Euclid cluster counts. Our model is calibrated against a suite of N-body simulations using a Bayesian approach taking into account systematic errors arising from numerical effects in the simulation. First, we test the convergence of HMF predictions from different N-body codes, by using initial conditions generated with different orders of Lagrangian Perturbation theory, and adopting different simulation box sizes and mass resolution. Then, we quantify the effect of using different halo-finder algorithms, and how the resulting differences propagate to the cosmological constraints. In order to trace the violation of universality in the HMF, we also analyse simulations based on initial conditions characterised by scale-free power spectra with different spectral indexes, assuming both Einstein--de Sitter and standard $Λ$CDM expansion histories. Based on these results, we construct a fitting function for the HMF that we demonstrate to be sub-percent accurate in reproducing results from 9 different variants of the $Λ$CDM model including massive neutrinos cosmologies. The calibration systematic uncertainty is largely sub-dominant with respect to the expected precision of future mass-observation relations; with the only notable exception of the effect due to the halo finder, that could lead to biased cosmological inference.
△ Less
Submitted 16 March, 2023; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Uncertainty quantification for mineral precipitation and dissolution in fractured porous media
Authors:
Michele Botti,
Alessio Fumagalli,
Anna Scotti
Abstract:
In this work, we present an uncertainty quantification analysis to determine the influence and importance of some physical parameters in a reactive transport model in fractured porous media. An accurate description of flow and transport in the fractures is key to obtain reliable simulations, however, fractures geometry and physical characteristics pose several challenges from both the modeling and…
▽ More
In this work, we present an uncertainty quantification analysis to determine the influence and importance of some physical parameters in a reactive transport model in fractured porous media. An accurate description of flow and transport in the fractures is key to obtain reliable simulations, however, fractures geometry and physical characteristics pose several challenges from both the modeling and implementation side. We adopt a mixed-dimensional approximation, where fractures and their intersections are represented as objects of lower dimension. To simplify the presentation, we consider only two chemical species: one solute, transported by water, and one precipitate attached to the solid skeleton. A global sensitivity analysis to uncertain input data is performed exploiting the Polynomial Chaos expansion along with spectral projection methods on sparse grids.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Well-posedness and variational numerical scheme for an adaptive model in highly heterogeneous porous media
Authors:
Alessio Fumagalli,
Francesco Saverio Patacchini
Abstract:
Mathematical modeling of fluid flow in a porous medium is usually described by a continuity equation and a chosen constitutive law. The latter, depending on the problem at hand, may be a nonlinear relation between the fluid's pressure gradient and velocity. The actual shape of this relation is normally chosen at the outset of the problem, even though, in practice, the fluid may experience velociti…
▽ More
Mathematical modeling of fluid flow in a porous medium is usually described by a continuity equation and a chosen constitutive law. The latter, depending on the problem at hand, may be a nonlinear relation between the fluid's pressure gradient and velocity. The actual shape of this relation is normally chosen at the outset of the problem, even though, in practice, the fluid may experience velocities outside of its range of applicability. We propose here an adaptive model, so that the most appropriate law is locally selected depending on the computed velocity. From the analytical point of view, we show well-posedness of the problem when the law is monotone in velocity and show existence in one space dimension otherwise. From the computational point of view, we present a new approach based on regularizing via mollification the underlying dissipation, i.e., the power lost by the fluid to the porous medium through drag. The resulting regularization is shown to converge to the original problem using $Γ$-convergence on the dissipation in the monotone case. This approach gives rise to a variational numerical scheme which applies to very general problems and which we validate on three test cases.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Fitting covariance matrix models to simulations
Authors:
Alessandra Fumagalli,
Matteo Biagetti,
Alexandro Saro,
Emiliano Sefusatti,
Anže Slosar,
Pierluigi Monaco,
Alfonso Veropalumbo
Abstract:
Data analysis in cosmology requires reliable covariance matrices. Covariance matrices derived from numerical simulations often require a very large number of realizations to be accurate. When a theoretical model for the covariance matrix exists, the parameters of the model can often be fit with many fewer simulations. We write a likelihood-based method for performing such a fit. We demonstrate how…
▽ More
Data analysis in cosmology requires reliable covariance matrices. Covariance matrices derived from numerical simulations often require a very large number of realizations to be accurate. When a theoretical model for the covariance matrix exists, the parameters of the model can often be fit with many fewer simulations. We write a likelihood-based method for performing such a fit. We demonstrate how a model covariance matrix can be tested by examining the appropriate $χ^2$ distributions from simulations. We show that if model covariance has amplitude freedom, the expectation value of second moment of $χ^2$ distribution with a wrong covariance matrix will always be larger than one using the true covariance matrix. By combining these steps together, we provide a way of producing reliable covariances without ever requiring running a large number of simulations. We demonstrate our method on two examples. First, we measure the two-point correlation function of halos from a large set of $10000$ mock halo catalogs. We build a model covariance with $2$ free parameters, which we fit using our procedure. The resulting best-fit model covariance obtained from just $100$ simulation realizations proves to be as reliable as the numerical covariance matrix built from the full $10000$ set. We also test our method on a setup where the covariance matrix is large by measuring the halo bispectrum for thousands of triangles for the same set of mocks. We build a block diagonal model covariance with $2$ free parameters as an improvement over the diagonal Gaussian covariance. Our model covariance passes the $χ^2$ test only partially in this case, signaling that the model is insufficient even using free parameters, but significantly improves over the Gaussian one.
△ Less
Submitted 21 November, 2022; v1 submitted 10 June, 2022;
originally announced June 2022.
-
A Reduced Basis Method for Darcy flow systems that ensures local mass conservation by using exact discrete complexes
Authors:
Wietse M. Boon,
Alessio Fumagalli
Abstract:
A solution technique is proposed for flows in porous media that guarantees local conservation of mass. We first compute a flux field to balance the mass source and then exploit exact co-chain complexes to generate a solenoidal correction. A reduced basis method based on proper orthogonal decomposition is employed to construct the correction and we show that mass balance is ensured regardless of th…
▽ More
A solution technique is proposed for flows in porous media that guarantees local conservation of mass. We first compute a flux field to balance the mass source and then exploit exact co-chain complexes to generate a solenoidal correction. A reduced basis method based on proper orthogonal decomposition is employed to construct the correction and we show that mass balance is ensured regardless of the quality of the reduced basis approximation. The method is directly applicable to mixed finite and virtual element methods, among other structure-preserving discretization techniques, and we present the extension to Darcy flow in fractured porous media.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
Bend 3d Mixed Virtual Element Method for Elliptic Problems
Authors:
Franco Dassi,
Alessio Fumagalli,
Anna Scotti,
Giuseppe Vacca
Abstract:
In this study, we propose a virtual element scheme to solve the Darcy problem in three physical dimensions. The main novelty, here proposed, is that curved elements are naturally handled without any degradation of the solution accuracy. In fact, in presence of curved boundaries, or internal interfaces, the geometrical error introduced by planar approximations may dominate the convergence rate limi…
▽ More
In this study, we propose a virtual element scheme to solve the Darcy problem in three physical dimensions. The main novelty, here proposed, is that curved elements are naturally handled without any degradation of the solution accuracy. In fact, in presence of curved boundaries, or internal interfaces, the geometrical error introduced by planar approximations may dominate the convergence rate limiting the benefit of high-order approximations. We consider the Darcy problem in its mixed form to directly obtain, with our numerical scheme, accurate and mass conservative fluxes without any post-processing. An important step to derive this new scheme is the actual computation of polynomials over curved polyhedrons, here presented and discussed. Finally, we show the theoretical analysis of the scheme as well as several numerical examples to support our findings
△ Less
Submitted 20 November, 2021;
originally announced November 2021.
-
Satellite galaxy abundance dependency on cosmology in Magneticum simulations
Authors:
Antonio Ragagnin,
Alessandra Fumagalli,
Tiago Castro,
Klaus Dolag,
Alexandro Saro,
Matteo Costanzi,
Sebastian Bocquet
Abstract:
Context: Modelling satellite galaxy abundance $N_s$ in Galaxy Clusters (GCs) is a key element in modelling the Halo Occupation Distribution (HOD), which itself is a powerful tool to connect observational studies with numerical simulations. Aims: To study the impact of cosmological parameters on satellite abundance both in cosmological simulations and in mock observations. Methods: We build an emul…
▽ More
Context: Modelling satellite galaxy abundance $N_s$ in Galaxy Clusters (GCs) is a key element in modelling the Halo Occupation Distribution (HOD), which itself is a powerful tool to connect observational studies with numerical simulations. Aims: To study the impact of cosmological parameters on satellite abundance both in cosmological simulations and in mock observations. Methods: We build an emulator (HODEmu, \url{https://github.com/aragagnin/HODEmu/}) of satellite abundance based on cosmological parameters $Ω_m, Ω_b, σ_8, h_0$ and redshift $z.$ We train our emulator using \magneticum hydrodynamic simulations that span 15 different cosmologies, each over $4$ redshift slices between $0<z<0.5,$ and for each setup we fit normalisation $A$, log-slope $β$ and Gaussian fractional-scatter $σ$ of the $N_s-M$ relation. The emulator is based on multi-variate output Gaussian Process Regression (GPR). Results: We find that $A$ and $β$ depend on cosmological parameters, even if weakly, especially on $Ω_m,$ $Ω_b.$ This dependency can explain some discrepancies found in literature between satellite HOD of different cosmological simulations (Magneticum, Illustris, BAHAMAS). We also show that satellite abundance cosmology dependency differs between full-physics (FP) simulations, dark-matter only (DMO), and non-radiative simulations. Conclusions: This work provides a preliminary calibration of the cosmological dependency of the satellite abundance of high mass halos, and we showed that modelling HOD with cosmological parameters is necessary to interpret satellite abundance, and we showed the importance of using FP simulations in modelling this dependency.
△ Less
Submitted 16 September, 2022; v1 submitted 11 October, 2021;
originally announced October 2021.
-
A Comprehensive Study of Virtual Machine and Container Based Core Network Components Migration in OpenROADM SDN-Enabled Network
Authors:
Shunmugapriya Ramanathan,
Koteswararao Kondepu,
Tianliang Zhang,
Behzad Mirkhanzadeh,
Miguel Razo,
Marco Tacca,
Luca Valcarenghi,
Andrea Fumagalli
Abstract:
With the increasing demand for openness, flexibility, and monetization the Network Function Virtualization (NFV) of mobile network functions has become the embracing factor for most mobile network operators. Early reported field deployments of virtualized Evolved Packet Core (EPC) - the core network component of 4G LTE and 5G non-standalone mobile networks - reflect this growing trend. To best mee…
▽ More
With the increasing demand for openness, flexibility, and monetization the Network Function Virtualization (NFV) of mobile network functions has become the embracing factor for most mobile network operators. Early reported field deployments of virtualized Evolved Packet Core (EPC) - the core network component of 4G LTE and 5G non-standalone mobile networks - reflect this growing trend. To best meet the requirements of power management, load balancing, and fault tolerance in the cloud environment, the need for live migration for these virtualized components cannot be shunned. Virtualization platforms of interest include both Virtual Machines (VMs) and Containers, with the latter option offering more lightweight characteristics. The first contribution of this paper is the implementation of a number of custom functions that enable migration of Containers supporting virtualized EPC components. The current CRIU-based migration of Docker Container does not fully support the mobile network protocol stack. CRIU extensions to support the mobile network protocol stack are therefore required and described in the paper. The second contribution is an experimental-based comprehensive analysis of live migration in two backhaul network settings and two virtualization technologies. The two backhaul network settings are the one provided by CloudLab and one based on a programmable optical network testbed that makes use of OpenROADM dense wavelength division multiplexing (DWDM) equipment. The paper compares the migration performance of the proposed implementation of OpenAirInterface (OAI) based containerized EPC components with the one utilizing VMs, running in OpenStack. The presented experimental comparison accounts for a number of system parameters and configurations, image size of the virtualized EPC components, network characteristics, and signal propagation time across the OpenROADM backhaul network.
△ Less
Submitted 27 August, 2021;
originally announced August 2021.
-
A Virtual Element Method for the wave equation on curved edges in two dimensions
Authors:
Franco Dassi,
Alessio Fumagalli,
Ilario Mazzieri,
Anna Scotti,
Giuseppe Vacca
Abstract:
In this work we present an extension of the Virtual Element Method with curved edges for the numerical approximation of the second order wave equation in a bidimensional setting. Curved elements are used to describe the domain boundary, as well as internal interfaces corresponding to the change of some mechanical parameters. As opposite to the classic and isoparametric Finite Element approaches, w…
▽ More
In this work we present an extension of the Virtual Element Method with curved edges for the numerical approximation of the second order wave equation in a bidimensional setting. Curved elements are used to describe the domain boundary, as well as internal interfaces corresponding to the change of some mechanical parameters. As opposite to the classic and isoparametric Finite Element approaches, where the geometry of the domain is approximated respectively by piecewise straight lines and by higher order polynomial maps, in the proposed method the geometry is exactly represented, thus ensuring a highly accurate numerical solution. Indeed, if in the former approach the geometrical error might deteriorate the quality of the numerical solution, in the latter approach the curved interfaces/boundaries are approximated exactly guaranteeing the expected order of convergence for the numerical scheme. Theoretical results and numerical findings confirm the validity of the proposed approach.
△ Less
Submitted 11 June, 2021;
originally announced June 2021.
-
Quantum circuits with many photons on a programmable nanophotonic chip
Authors:
J. M. Arrazola,
V. Bergholm,
K. Brádler,
T. R. Bromley,
M. J. Collins,
I. Dhand,
A. Fumagalli,
T. Gerrits,
A. Goussev,
L. G. Helt,
J. Hundal,
T. Isacsson,
R. B. Israel,
J. Izaac,
S. Jahangiri,
R. Janik,
N. Killoran,
S. P. Kumar,
J. Lavoie,
A. E. Lita,
D. H. Mahler,
M. Menotti,
B. Morrison,
S. W. Nam,
L. Neuhaus
, et al. (14 additional authors not shown)
Abstract:
Growing interest in quantum computing for practical applications has led to a surge in the availability of programmable machines for executing quantum algorithms. Present day photonic quantum computers have been limited either to non-deterministic operation, low photon numbers and rates, or fixed random gate sequences. Here we introduce a full-stack hardware-software system for executing many-phot…
▽ More
Growing interest in quantum computing for practical applications has led to a surge in the availability of programmable machines for executing quantum algorithms. Present day photonic quantum computers have been limited either to non-deterministic operation, low photon numbers and rates, or fixed random gate sequences. Here we introduce a full-stack hardware-software system for executing many-photon quantum circuits using integrated nanophotonics: a programmable chip, operating at room temperature and interfaced with a fully automated control system. It enables remote users to execute quantum algorithms requiring up to eight modes of strongly squeezed vacuum initialized as two-mode squeezed states in single temporal modes, a fully general and programmable four-mode interferometer, and genuine photon number-resolving readout on all outputs. Multi-photon detection events with photon numbers and rates exceeding any previous quantum optical demonstration on a programmable device are made possible by strong squeezing and high sampling rates. We verify the non-classicality of the device output, and use the platform to carry out proof-of-principle demonstrations of three quantum algorithms: Gaussian boson sampling, molecular vibronic spectra, and graph similarity.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Model adaptation in a discrete fracture network: existence of solutions and numerical strategies
Authors:
Alessio Fumagalli,
Francesco Saverio Patacchini
Abstract:
Fractures are normally present in the underground and are, for some physical processes, of paramount importance. Their accurate description is fundamental to obtain reliable numerical outcomes useful, e.g., for energy management. Depending on the physical and geometrical properties of the fractures, fluid flow can behave differently, going from a slow Darcian regime to more complicated Brinkman or…
▽ More
Fractures are normally present in the underground and are, for some physical processes, of paramount importance. Their accurate description is fundamental to obtain reliable numerical outcomes useful, e.g., for energy management. Depending on the physical and geometrical properties of the fractures, fluid flow can behave differently, going from a slow Darcian regime to more complicated Brinkman or even Forchheimer regimes for high velocity. The main problem is to determine where in the fractures one regime is more adequate than others. In order to determine these low-speed and high-speed regions, this work proposes an adaptive strategy which is based on selecting the appropriate constitutive law linking velocity and pressure according to a threshold criterion on the magnitude of the fluid velocity itself. Both theoretical and numerical aspects are considered and investigated, showing the potentiality of the proposed approach. From the analytical viewpoint, we show existence of weak solutions to such model under reasonable hypotheses on the constitutive laws. To this end, we use a variational approach identifying solutions with minimizers of an underlying energy functional. From the numerical viewpoint, we propose a one-dimensional algorithm which tracks the interface between the low- and high-speed regions. By running numerical experiments using this algorithm, we illustrate some interesting behaviors of our adaptive model on a single fracture and small networks of intersecting fractures.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Euclid: Effect of sample covariance on the number counts of galaxy clusters
Authors:
A. Fumagalli,
A. Saro,
S. Borgani,
T. Castro,
M. Costanzi,
P. Monaco,
E. Munari,
E. Sefusatti,
A. Amara,
N. Auricchio,
A. Balestra,
C. Bodendorf,
D. Bonino,
E. Branchini,
J. Brinchmann,
V. Capobianco,
C. Carbone,
M. Castellano,
S. Cavuoti,
A. Cimatti,
R. Cledassou,
C. J. Conselice,
L. Corcione,
A. Costille,
M. Cropper
, et al. (71 additional authors not shown)
Abstract:
Aims. We investigate the contribution of shot-noise and sample variance to the uncertainty of cosmological parameter constraints inferred from cluster number counts in the context of the Euclid survey. Methods. By analysing 1000 Euclid-like light-cones, produced with the PINOCCHIO approximate method, we validate the analytical model of Hu & Kravtsov 2003 for the covariance matrix, which takes into…
▽ More
Aims. We investigate the contribution of shot-noise and sample variance to the uncertainty of cosmological parameter constraints inferred from cluster number counts in the context of the Euclid survey. Methods. By analysing 1000 Euclid-like light-cones, produced with the PINOCCHIO approximate method, we validate the analytical model of Hu & Kravtsov 2003 for the covariance matrix, which takes into account both sources of statistical error. Then, we use such covariance to define the likelihood function that better extracts cosmological information from cluster number counts at the level of precision that will be reached by the future Euclid photometric catalogs of galaxy clusters. We also study the impact of the cosmology dependence of the covariance matrix on the parameter constraints. Results. The analytical covariance matrix reproduces the variance measured from simulations within the 10 per cent level; such difference has no sizeable effect on the error of cosmological parameter constraints at this level of statistics. Also, we find that the Gaussian likelihood with cosmology-dependent covariance is the only model that provides an unbiased inference of cosmological parameters without underestimating the errors.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Haptic-enabled Mixed Reality System for Mixed-initiative Remote Robot Control
Authors:
Yuan Tian,
Lianjun Li,
Andrea Fumagalli,
Yonas Tadesse,
Balakrishnan Prabhakaran
Abstract:
Robots assist in many areas that are considered unsafe for humans to operate. For instance, in handling pandemic diseases such as the recent Covid-19 outbreak and other outbreaks like Ebola, robots can assist in reaching areas dangerous for humans and do simple tasks such as pick up the correct medicine (among a set of bottles prescribed) and deliver to patients. In such cases, it might not be goo…
▽ More
Robots assist in many areas that are considered unsafe for humans to operate. For instance, in handling pandemic diseases such as the recent Covid-19 outbreak and other outbreaks like Ebola, robots can assist in reaching areas dangerous for humans and do simple tasks such as pick up the correct medicine (among a set of bottles prescribed) and deliver to patients. In such cases, it might not be good to rely on the fully autonomous operation of robots. Since many mobile robots are fully functional with low-level tasks such as grabbing and moving, we consider the mixed-initiative control where the user can guide the robot remotely to finish such tasks. For this mixed-initiative control, the user controlling the robot needs to visualize a 3D scene as seen by the robot and guide it. Mixed reality can virtualize reality and immerse users in the 3D scene that is reconstructed from the real-world environment. This technique provides the user more freedom such as choosing viewpoints at view time. In recent years, benefiting from the high-quality data from Light Detection and Ranging (LIDAR) and RGBD cameras, mixed reality is widely used to build networked platforms to improve the performance of robot teleoperations and robot-human collaboration, and enhanced feedback for mixed-initiative control. In this paper, we proposed a novel haptic-enabled mixed reality system, that provides haptic interfaces to interact with the virtualized environments and give remote guidance for mobile robots towards high-level tasks. The experimental results show the effectiveness and flexibility of the proposed haptic enabled mixed reality system.
△ Less
Submitted 7 June, 2021; v1 submitted 6 February, 2021;
originally announced February 2021.
-
The mixed virtual element method for grids with curved interfaces
Authors:
Franco Dassi,
Alessio Fumagalli,
Davide Losapio,
Stefano Scialò,
Anna Scotti,
Giuseppe Vacca
Abstract:
In many applications the accurate representation of the computational domain is a key factor to obtain reliable and effective numerical solutions. Curved interfaces, which might be internal, related to physical data, or portions of the physical boundary, are often met in real applications. However, they are often approximated leading to a geometrical error that might become dominant and deteriorat…
▽ More
In many applications the accurate representation of the computational domain is a key factor to obtain reliable and effective numerical solutions. Curved interfaces, which might be internal, related to physical data, or portions of the physical boundary, are often met in real applications. However, they are often approximated leading to a geometrical error that might become dominant and deteriorate the quality of the results. Underground problems often involve the motion of fluids where the fundamental governing equation is the Darcy law. High quality velocity fields are of paramount importance for the successful subsequent coupling with other physical phenomena such as transport. The virtual element method, as solution scheme, is known to be applicable in problems whose discretizations requires cells of general shape, and the mixed formulation is here preferred to obtain accurate velocity fields. To overcome the issues associated to the complex geometries and, at the same time, retaining the quality of the solutions, we present here the virtual element method to solve the Darcy problem, in mixed form, in presence of curved interfaces in two and three dimensions. The numerical scheme is presented in detail explaining the discrete setting with a focus on the treatment of curved interfaces. Examples, inspired from industrial applications, are presented showing the validity of the proposed approach.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
A multi-layer reactive transport model for fractured porous media
Authors:
Luca Formaggia,
Alessio Fumagalli,
Anna Scotti
Abstract:
An accurate modeling of reactive flows in fractured porous media is a key ingredient to obtain reliable numerical simulations of several industrial and environmental applications. For some values of the physical parameters we can observe the formation of a narrow region or layer around the fractures where chemical reactions are focused. Here the transported solute may precipitate and form a salt,…
▽ More
An accurate modeling of reactive flows in fractured porous media is a key ingredient to obtain reliable numerical simulations of several industrial and environmental applications. For some values of the physical parameters we can observe the formation of a narrow region or layer around the fractures where chemical reactions are focused. Here the transported solute may precipitate and form a salt, or vice-versa. This phenomenon has been observed and reported in real outcrops. By changing its physical properties this layer might substantially alter the global flow response of the system and thus the actual transport of solute: the problem is thus non-linear and fully coupled. The aim of this work is to propose a new mathematical model for reactive flow in fractured porous media, by approximating both the fracture and these surrounding layers via a reduced model. In particular, our main goal is to describe the layer thickness evolution with a new mathematical model, and compare it to a fully resolved equidimensional model for validation. As concerns numerical approximation we extend an operator splitting scheme in time to solve sequentially, at each time step, each physical process thus avoiding the need for a non-linear monolithic solver, which might be challenging due to the non-smoothness of the reaction rate. We consider bi- and tridimensional numerical test cases to asses the accuracy and benefit of the proposed model in realistic scenarios.
△ Less
Submitted 9 November, 2020;
originally announced November 2020.
-
The Mixed Virtual Element Method on curved edges in two dimensions
Authors:
Franco Dassi,
Alessio Fumagalli,
Davide Losapio,
Stefano Scialò,
Anna Scotti,
Giuseppe Vacca
Abstract:
In this work, we propose an extension of the mixed Virtual Element Method (VEM) for bi-dimensional computational grids with curvilinear edge elements. The approximation by means of rectilinear edges of a domain with curvilinear geometrical feature, such as a portion of domain boundary or an internal interface, may introduce a geometrical error that degrades the expected order of convergence of the…
▽ More
In this work, we propose an extension of the mixed Virtual Element Method (VEM) for bi-dimensional computational grids with curvilinear edge elements. The approximation by means of rectilinear edges of a domain with curvilinear geometrical feature, such as a portion of domain boundary or an internal interface, may introduce a geometrical error that degrades the expected order of convergence of the scheme. In the present work a suitable VEM approximation space is proposed to consistently handle curvilinear geometrical objects, thus recovering optimal convergence rates. The resulting numerical scheme is presented along with its theoretical analysis and several numerical test cases to validate the proposed approach.
△ Less
Submitted 27 July, 2020;
originally announced July 2020.
-
A mathematical model for thermal single-phase flow and reactive transport in fractured porous media
Authors:
Alessio Fumagalli,
Anna Scotti
Abstract:
In this paper we present a mathematical model and a numerical workflow for the simulation of a thermal single-phase flow with reactive transport in porous media, in the presence of fractures. The latter are thin regions which might behave as high or low permeability channels depending on their physical parameters, and are thus of paramount importance in underground flow problems. Chemical reaction…
▽ More
In this paper we present a mathematical model and a numerical workflow for the simulation of a thermal single-phase flow with reactive transport in porous media, in the presence of fractures. The latter are thin regions which might behave as high or low permeability channels depending on their physical parameters, and are thus of paramount importance in underground flow problems. Chemical reactions may alter the local properties of the porous media as well as the fracture walls, changing the flow path and possibly occluding some portions of the fractures or zones in the porous media. To solve numerically the coupled problem we propose a temporal splitting scheme so that the equations describing each physical process are solved sequentially. Numerical tests shows the accuracy of the proposed model and the ability to capture complex phenomena, where one or multiple fractures are present.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
Numerical Methods for Flow in Fractured Porous Media
Authors:
Luca Formaggia,
Anna Scotti,
Alessio Fumagalli
Abstract:
In this work we present the mathematical models for single-phase flow in fractured porous media. An overview of the most common approaches is considered, which includes continuous fracture models and discrete fracture models. For the latter, we discuss strategies that are developed in literature for its numerical solution mainly related to the geometrical relation between the fractures and porous…
▽ More
In this work we present the mathematical models for single-phase flow in fractured porous media. An overview of the most common approaches is considered, which includes continuous fracture models and discrete fracture models. For the latter, we discuss strategies that are developed in literature for its numerical solution mainly related to the geometrical relation between the fractures and porous media grids.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
Performances of the mixed virtual element method on complex grids for underground flow
Authors:
Alessio Fumagalli,
Anna Scotti,
Luca Formaggia
Abstract:
The numerical simulation of physical processes in the underground frequently entails challenges related to the geometry and/or data. The former are mainly due to the shape of sedimentary layers and the presence of fractures and faults, while the latter are connected to the properties of the rock matrix which might vary abruptly in space. The development of approximation schemes has recently focuse…
▽ More
The numerical simulation of physical processes in the underground frequently entails challenges related to the geometry and/or data. The former are mainly due to the shape of sedimentary layers and the presence of fractures and faults, while the latter are connected to the properties of the rock matrix which might vary abruptly in space. The development of approximation schemes has recently focused on the overcoming of such difficulties with the objective of obtaining numerical schemes with good approximation properties. In this work we carry out a numerical study on the performances of the Mixed Virtual Element Method (MVEM) for the solution of a single-phase flow model in fractured porous media. This method is able to handle grid cells of polytopal type and treat hybrid dimensional problems. It has been proven to be robust with respect to the variation of the permeability field and of the shape of the elements. Our numerical experiments focus on two test cases that cover several of the aforementioned critical aspects.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
Verification benchmarks for single-phase flow in three-dimensional fractured porous media
Authors:
Inga Berre,
Wietse M. Boon,
Bernd Flemisch,
Alessio Fumagalli,
Dennis Gläser,
Eirik Keilegavlen,
Anna Scotti,
Ivar Stefansson,
Alexandru Tatomir,
Konstantin Brenner,
Samuel Burbulla,
Philippe Devloo,
Omar Duran,
Marco Favino,
Julian Hennicker,
I-Hsien Lee,
Konstantin Lipnikov,
Roland Masson,
Klaus Mosthaf,
Maria Giuseppina Chiara Nestola,
Chuen-Fa Ni,
Kirill Nikitin,
Philipp Schädle,
Daniil Svyatskiy,
Ruslan Yanbarisov
, et al. (1 additional authors not shown)
Abstract:
Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flo…
▽ More
Flow in fractured porous media occurs in the earth's subsurface, in biological tissues, and in man-made materials. Fractures have a dominating influence on flow processes, and the last decade has seen an extensive development of models and numerical methods that explicitly account for their presence. To support these developments, we present a portfolio of four benchmark cases for single-phase flow in three-dimensional fractured porous media. The cases are specifically designed to test the methods' capabilities in handling various complexities common to the geometrical structures of fracture networks. Based on an open call for participation, results obtained with 17 numerical methods were collected. This paper presents the underlying mathematical model, an overview of the features of the participating numerical methods, and their performance in solving the benchmark cases.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Reactive flow in fractured porous media
Authors:
Alessio Fumagalli,
Anna Scotti
Abstract:
In this work we present a model reduction procedure to derive a hybrid-dimensional framework for the mathematical modeling of reactive transport in fractured porous media. Fractures are essential pathways in the underground which allow fast circulation of the fluids present in the rock matrix, often characterized by low permeability. However, due to infilling processes fractures may change their h…
▽ More
In this work we present a model reduction procedure to derive a hybrid-dimensional framework for the mathematical modeling of reactive transport in fractured porous media. Fractures are essential pathways in the underground which allow fast circulation of the fluids present in the rock matrix, often characterized by low permeability. However, due to infilling processes fractures may change their hydraulic properties and become barriers for the flow creating impervious blocks. The geometrical as well as the physical properties of the fractures require a special treatment to allow the subsequent numerical discretization to be affordable and accurate. The aim of this work is to introduce a simple yet complete mathematical model to account for such diagenetic effects where chemical reactions will occlude or empty portions of the porous media and, in particular, fractures.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
PorePy: An Open-Source Software for Simulation of Multiphysics Processes in Fractured Porous Media
Authors:
Eirik Keilegavlen,
Runar Berge,
Alessio Fumagalli,
Michele Starnoni,
Ivar Stefansson,
Jhabriel Varela,
Inga Berre
Abstract:
Development of models and dedicated numerical methods for dynamics in fractured rocks is an active research field, with research moving towards increasingly advanced process couplings and complex fracture networks. The inclusion of coupled processes in simulation models is challenged by the high aspect ratio of the fractures, the complex geometry of fracture networks and the crucial impact of proc…
▽ More
Development of models and dedicated numerical methods for dynamics in fractured rocks is an active research field, with research moving towards increasingly advanced process couplings and complex fracture networks. The inclusion of coupled processes in simulation models is challenged by the high aspect ratio of the fractures, the complex geometry of fracture networks and the crucial impact of processes that completely change characteristics on the fracture-rock interface. This paper provides a general discussion of design principles for introducing fractures in simulators, and defines a framework for integrated modeling, discretization and computer implementation. The framework is implemented in the simulation software PorePy, which can serve as a flexible prototy** tool or multiphysics problems in fractured rocks. Based on a representation of the fractures and their intersections as lower-dimensional objects, we discuss data structures for mixed-dimensional meshes, formulation of multiphysics problems and discretizations that utilize existing software. We further present the implementation of these concepts in the PorePy open-source software tool, which is aimed at coupled simulation of flow and transport in three-dimensional fractured reservoirs as well as deformation of fractures and the reservoir in general. We present validation by benchmarks for flow, poroelasticity and fracture deformation in fractured porous media. The flexibility of the framework is then illustrated by simulations of fully coupled flow and transport and of injection driven deformation of fractures. All results reported herein can be reproduced by openly available simulation scripts.
△ Less
Submitted 26 August, 2019;
originally announced August 2019.
-
Analysis of conforming, non-matching, and polygonal methods for Darcy and advection-diffusion-reaction simulations in discrete fracture networks
Authors:
Andrea Borio,
Alessio Fumagalli,
Stefano Scialò
Abstract:
The aim of this study is to compare numerical methods for the simulation of single-phase flow and transport in fractured media, described here by means of the Discrete Fracture Network (DFN) model. A Darcy problem is solved to compute the advective field, then used in a subsequent time dependent transport-diffusion-reaction problem. The numerical schemes are benchmarked in terms of flexibility in…
▽ More
The aim of this study is to compare numerical methods for the simulation of single-phase flow and transport in fractured media, described here by means of the Discrete Fracture Network (DFN) model. A Darcy problem is solved to compute the advective field, then used in a subsequent time dependent transport-diffusion-reaction problem. The numerical schemes are benchmarked in terms of flexibility in handling geometrical complexity, mass conservation and stability issues for advection dominated flow regimes. To this end, three benchmark cases have been specifically designed and are here proposed, representing some of the most critical issues encountered in DFN simulations.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Robust linear domain decomposition schemes for reduced non-linear fracture flow models
Authors:
Elyes Ahmed,
Alessio Fumagalli,
Ana Budiša,
Eirik Keilegavlen,
Jan Martin Nordbotten,
Florin Adrian Radu
Abstract:
In this work, we consider compressible single-phase flow problems in a porous media containing a fracture. In the latter, a non-linear pressure-velocity relation is prescribed. Using a non-overlap** domain decomposition procedure, we reformulate the global problem into a non-linear interface problem. We then introduce two new algorithms that are able to efficiently handle the non-linearity and t…
▽ More
In this work, we consider compressible single-phase flow problems in a porous media containing a fracture. In the latter, a non-linear pressure-velocity relation is prescribed. Using a non-overlap** domain decomposition procedure, we reformulate the global problem into a non-linear interface problem. We then introduce two new algorithms that are able to efficiently handle the non-linearity and the coupling between the fracture and the matrix, both based on linearization by the so-called L-scheme. The first algorithm, named MoLDD, uses the L-scheme to resolve the non-linearity, requiring at each iteration to solve the dimensional coupling via a domain decomposition approach. The second algorithm, called ItLDD, uses a sequential approach in which the dimensional coupling is part of the linearization iterations. For both algorithms, the computations are reduced only to the fracture by pre-computing, in an offline phase, a multiscale flux basis (the linear Robin-to-Neumann co-dimensional map), that represent the flux exchange between the fracture and the matrix. We present extensive theoretical findings and in particular, the stability and the convergence of both schemes are obtained, where user given parameters are optimized to minimise the number of iterations. Examples on two important fracture models are computed with the library PorePy and agree with the developed theory.
△ Less
Submitted 1 October, 2020; v1 submitted 13 June, 2019;
originally announced June 2019.
-
A multi-layer reduced model for flow in porous media with a fault and surrounding damage zones
Authors:
Alessio Fumagalli,
Anna Scotti
Abstract:
In this work we present a new conceptual model to describe fluid flow in a porous media system in presence of a large fault. Geological faults are often modeled simply as interfaces in the rock matrix, but they are complex structure where the high strain core is surrounded by the so called damage zones, characterized by the presence of smaller fractures which enhance the permeability of the medium…
▽ More
In this work we present a new conceptual model to describe fluid flow in a porous media system in presence of a large fault. Geological faults are often modeled simply as interfaces in the rock matrix, but they are complex structure where the high strain core is surrounded by the so called damage zones, characterized by the presence of smaller fractures which enhance the permeability of the medium. To obtain reliable simulation outcomes these damage zone, as well as the fault, have to be accurately described. The new model proposed in this work considers both these two regions as lower dimensional and embedded in the rock matrix. The model is presented, analyzed, and tested in several configurations to prove its robustness and ability to capture many important features, such as hight contrast and heterogeneity of permeability.
△ Less
Submitted 4 March, 2019;
originally announced March 2019.
-
A multiscale flux basis for mortar mixed discretizations of reduced Darcy-Forchheimer fracture models
Authors:
Elyes Ahmed,
Alessio Fumagalli,
Ana Budiša
Abstract:
In this paper, a multiscale flux basis algorithm is developed to efficiently solve a flow problem in fractured porous media. Here, we take into account a mixed-dimensional setting of the discrete fracture matrix model, where the fracture network is represented as lower-dimensional object. We assume the linear Darcy model in the rock matrix and the non-linear Forchheimer model in the fractures. In…
▽ More
In this paper, a multiscale flux basis algorithm is developed to efficiently solve a flow problem in fractured porous media. Here, we take into account a mixed-dimensional setting of the discrete fracture matrix model, where the fracture network is represented as lower-dimensional object. We assume the linear Darcy model in the rock matrix and the non-linear Forchheimer model in the fractures. In our formulation, we are able to reformulate the matrix-fracture problem to only the fracture network problem and, therefore, significantly reduce the computational cost. The resulting problem is then a non-linear interface problem that can be solved using a fixed-point or Newton-Krylov methods, which in each iteration require several solves of Robin problems in the surrounding rock matrices. To achieve this, the flux exchange (a linear Robin-to-Neumann co-dimensional map**) between the porous medium and the fracture network is done offline by pre-computing a multiscale flux basis that consists of the flux response from each degree of freedom on the fracture network. This delivers a conserve for the basis that handles the solutions in the rock matrices for each degree of freedom in the fractures pressure space. Then, any Robin sub-domain problems are replaced by linear combinations of the multiscale flux basis during the interface iteration. The proposed approach is, thus, agnostic to the physical model in the fracture network. Numerical experiments demonstrate the computational gains of pre-computing the flux exchange between the porous medium and the fracture network against standard non-linear domain decomposition approaches.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Call for participation: Verification benchmarks for single-phase flow in three-dimensional fractured porous media
Authors:
Inga Berre,
Wietse Boon,
Bernd Flemisch,
Alessio Fumagalli,
Dennis Gläser,
Eirik Keilegavlen,
Anna Scotti,
Ivar Stefansson,
Alexandru Tatomir
Abstract:
This call for participation proposes four benchmark tests to verify and compare numerical schemes to solve single-phase flow in fractured porous media. With this, the two-dimensional suite of benchmark tests presented by Flemisch et al. 2018 is extended to include three-dimensional problems. Moreover, transport simulations are included as a means to compare discretization methods for flow. With th…
▽ More
This call for participation proposes four benchmark tests to verify and compare numerical schemes to solve single-phase flow in fractured porous media. With this, the two-dimensional suite of benchmark tests presented by Flemisch et al. 2018 is extended to include three-dimensional problems. Moreover, transport simulations are included as a means to compare discretization methods for flow. With this publication, we invite researchers to contribute to the study by providing results to the test cases based on their applied discretization methods.
△ Less
Submitted 18 September, 2018;
originally announced September 2018.
-
Conforming, non-conforming and non-matching discretization couplings in discrete fracture network simulations
Authors:
Alessio Fumagalli,
Eirik Keilegavlen,
Stefano Scialò
Abstract:
Simulations of fluid flow in naturally fractured rocks have implications for several subsurface applications, including energy storage and extraction, and waste storage. We are interested in flow in discrete fracture networks, which explicitly represent flow in fracture surfaces, but ignore the impact of the surrounding host rock. Fracture networks, generated from observations or stochastic simula…
▽ More
Simulations of fluid flow in naturally fractured rocks have implications for several subsurface applications, including energy storage and extraction, and waste storage. We are interested in flow in discrete fracture networks, which explicitly represent flow in fracture surfaces, but ignore the impact of the surrounding host rock. Fracture networks, generated from observations or stochastic simulations, will contain intersections of arbitrary length, and intersection lines can further cross, forming a highly complex geometry. As the flow exchange between fractures, thus in the network, takes place in these intersections, an adequate representation of the geometry is critical for simulation accuracy. In practice, the intersection dynamics must be handled by a combination of the simulation grid, which may or may not resolve the intersection lines, and the numerical methods applied on the grid. In this work, we review different classes of numerical approaches proposed in recent years, covering both methods that conform to the grid, and non-matching cases. Specific methods considered herein include finite element, mixed and virtual finite elements and control volume methods. We expose our methods to an extensive set of test cases, ranging from artificial geometries designed to test difficult configurations, to a network extruded from a real fracture outcrop. The main outcome is guidances for choice of simulation models and numerical discretization with a trade off on the computational cost and solution accuracy.
△ Less
Submitted 6 March, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
Unified approach to discretization of flow in fractured porous media
Authors:
Jan M. Nordbotten,
Wietse M. Boon,
Alessio Fumagalli,
Eirik Keilegavlen
Abstract:
In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid flow equations in the porous medium and in the fractures, and as such it represents a unified approach to integrated fractured geometries into any existing discre…
▽ More
In this paper, we introduce a mortar-based approach to discretizing flow in fractured porous media, which we term the mixed-dimensional flux coupling scheme. Our formulation is agnostic to the discretizations used to discretize the fluid flow equations in the porous medium and in the fractures, and as such it represents a unified approach to integrated fractured geometries into any existing discretization framework. In particular, several existing discretization approaches for fractured porous media can be seen as special instances of the approach proposed herein.
We provide an abstract stability theory for our approach, which provides explicit guidance into the grids used to discretize the fractures and the porous medium, as dependent on discretization methods chosen for the respective domains. The theoretical results are sustained by numerical examples, wherein we utilize our framework to simulate flow in 2D and 3D fractured media using control volume methods (both two-point and multi-point flux), Lagrangian finite element methods, mixed finite element methods, and virtual element methods. As expected, regardless of the ambient methods chosen, our approach leads to stable and convergent discretizations for the fractured problems considered, within the limits of the discretization schemes.
△ Less
Submitted 9 August, 2018; v1 submitted 16 February, 2018;
originally announced February 2018.
-
Implementation of mixed-dimensional models for flow in fractured porous media
Authors:
Eirik Keilegavlen,
Alessio Fumagalli,
Runar Berge,
Ivar Stefansson
Abstract:
Models that involve coupled dynamics in a mixed-dimensional geometry are of increasing interest in several applications. Here, we describe the development of a simulation model for flow in fractured porous media, where the fractures and their intersections form a hierarchy of interacting subdomains. We discuss the implementation of a simulation framework, with an emphasis on reuse of existing disc…
▽ More
Models that involve coupled dynamics in a mixed-dimensional geometry are of increasing interest in several applications. Here, we describe the development of a simulation model for flow in fractured porous media, where the fractures and their intersections form a hierarchy of interacting subdomains. We discuss the implementation of a simulation framework, with an emphasis on reuse of existing discretization tools for mono-dimensional problems. The key ingredients are the representation of the mixed-dimensional geometry as a graph, which allows for convenient discretization and data storage, and a non-intrusive coupling of dimensions via boundary conditions and source terms. This approach is applicable for a wide class of mixed-dimensional problems. We show simulation results for a flow problem in a three-dimensional fracture geometry, applying both finite volume and virtual finite element discretizations.
△ Less
Submitted 20 December, 2017;
originally announced December 2017.
-
PorePy: An Open-Source Simulation Tool for Flow and Transport in Deformable Fractured Rocks
Authors:
Eirik Keilegavlen,
Alessio Fumagalli,
Runar Berge,
Ivar Stefansson,
Inga Berre
Abstract:
Fractures are ubiquitous in the subsurface and strongly affect flow and deformation. The physical shape of the fractures, they are long and thin objects, puts strong limitations on how the effect of this dynamics can be incorporated into standard reservoir simulation tools. This paper reports the development of an open-source software framework, termed PorePy, which is aimed at simulation of flow…
▽ More
Fractures are ubiquitous in the subsurface and strongly affect flow and deformation. The physical shape of the fractures, they are long and thin objects, puts strong limitations on how the effect of this dynamics can be incorporated into standard reservoir simulation tools. This paper reports the development of an open-source software framework, termed PorePy, which is aimed at simulation of flow and transport in three-dimensional fractured reservoirs, as well as deformation of the reservoir due to shearing along fracture and fault planes. Starting from a description of fractures as polygons embedded in a 3D domain, PorePy provides semi-automatic gridding to construct a discrete-fracture-matrix model, which forms the basis for subsequent simulations. PorePy allows for flow and transport in all lower-dimensional objects, including planes (2D) representing fractures, and lines (1D) and points (0D), representing fracture intersections. Interaction between processes in neighboring domains of different dimension is implemented as a sequence of couplings of objects one dimension apart. This readily allows for handling of complex fracture geometries compared to capabilities of existing software. In addition to flow and transport, PorePy provides models for rock mechanics, poro-elasticity and coupling with fracture deformation models. The software is fully open, and can serve as a framework for transparency and reproducibility of simulations. We describe the design principles of PorePy from a user perspective, with focus on possibilities within gridding, covered physical processes and available discretizations. The power of the framework is illustrated with two sets of simulations; involving respectively coupled flow and transport in a fractured porous medium, and low-pressure stimulation of a geothermal reservoir.
△ Less
Submitted 21 December, 2017; v1 submitted 1 December, 2017;
originally announced December 2017.
-
Dual Virtual Element Methods for Discrete Fracture Matrix Models
Authors:
Alessio Fumagalli,
Eirik Keilegavlen
Abstract:
The accurate description of fluid flow and transport in fractured porous media is of paramount importance to capture the macroscopic behaviour of an oil reservoir, a geothermal system, or a CO2 sequestration site, to name few applications. The construction of accurate simulation model for flow in fractures is challenging due to the high ratios between a fracture's length and width, which makes mod…
▽ More
The accurate description of fluid flow and transport in fractured porous media is of paramount importance to capture the macroscopic behaviour of an oil reservoir, a geothermal system, or a CO2 sequestration site, to name few applications. The construction of accurate simulation model for flow in fractures is challenging due to the high ratios between a fracture's length and width, which makes modeling by lower-dimensional manifolds a natural option. In this paper we present a mixed-dimensional Darcy problem able to describe pressure and Darcy velocity in all the dimensions, i.e. in the rock matrix, in the fractures, and in their intersections. Moreover, we present a mixed-dimensional transport problem which, given the Darcy velocity, describes coupled advection and diffusion of a passive scalar into the fractured porous media. The approach can handle both conducting and blocking fractures. Our computational grids are created by coarsening of simplex tessellations that conform to the fractures surfaces. An accurate choice of the discrete approximation of the previous model, by virtual finite element and finite volume, allows us to simulate complex problem with a good balance in term of accuracy and computational cost. We illustrate the performance of our method by comparing to benchmark studies for two-dimensional fractured porous media, as well as a complex three-dimensional fracture geometry.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
A double-layer reduced model for fault flow on slip** domains with hybrid finite volume scheme
Authors:
Alessio Fumagalli,
Isabelle Faille
Abstract:
In this work we are interested in dealing with single-phase flows in fractured porous media for underground processes. We focus our attention on domains where the presence of faults, with thickness several orders of magnitude smaller than other characteristic sizes, can allow one part of the domain to slide past to the other. We propose a mathematical scheme where a reduced model for the fault flo…
▽ More
In this work we are interested in dealing with single-phase flows in fractured porous media for underground processes. We focus our attention on domains where the presence of faults, with thickness several orders of magnitude smaller than other characteristic sizes, can allow one part of the domain to slide past to the other. We propose a mathematical scheme where a reduced model for the fault flows is employed yielding a problem of co-dimension one. The hybrid finite volume method is used to obtain the discretized problem, which employs two different meshes for each fault, one associated with the porous-medium domain on each side of the fault. These two meshes can move with the corresponding domain, resulting in non-matching grids between the two parts of the fault. In an earlier paper a mathematical scheme was proposed where the numerical discretization considers the hybrid finite volume method. In this paper we focus on the well-posedness of the continuous problem, the convergence of the discretized problem, and with several numerical tests we support the theoretical findings.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
Dual virtual element method in presence of an inclusion
Authors:
Alessio Fumagalli
Abstract:
We consider a Darcy problem for saturated porous media written in dual formulation in presence of a fully immersed inclusion. The lowest order virtual element method is employ to derive the discrete approximation. In the present work we study the effect of cells with cuts on the numerical solution, able to geometrically handle in a more natural way the inclusion tips. The numerical results show th…
▽ More
We consider a Darcy problem for saturated porous media written in dual formulation in presence of a fully immersed inclusion. The lowest order virtual element method is employ to derive the discrete approximation. In the present work we study the effect of cells with cuts on the numerical solution, able to geometrically handle in a more natural way the inclusion tips. The numerical results show the validity of the proposed approach.
△ Less
Submitted 11 September, 2017;
originally announced September 2017.
-
Benchmarks for single-phase flow in fractured porous media
Authors:
Bernd Flemisch,
Inga Berre,
Wietse Boon,
Alessio Fumagalli,
Nicolas Schwenck,
Anna Scotti,
Ivar Stefansson,
Alexandru Tatomir
Abstract:
This paper presents several test cases intended to be benchmarks for numerical schemes for single-phase fluid flow in fractured porous media. A number of solution strategies are compared, including a vertex and a cell-centered finite volume method, a non-conforming embedded discrete fracture model, a primal and a dual extended finite element formulation, and a mortar discrete fracture model. The p…
▽ More
This paper presents several test cases intended to be benchmarks for numerical schemes for single-phase fluid flow in fractured porous media. A number of solution strategies are compared, including a vertex and a cell-centered finite volume method, a non-conforming embedded discrete fracture model, a primal and a dual extended finite element formulation, and a mortar discrete fracture model. The proposed benchmarks test the schemes by increasing the difficulties in terms of network geometry, e.g. intersecting fractures, and physical parameters, e.g. low and high fracture-matrix permeability ratio as well as heterogeneous fracture permeabilities. For each problem, the results presented by the participants are the number of unknowns, the approximation errors in the porous matrix and in the fractures with respect to a reference solution, and the sparsity and condition number of the discretized linear system. All data and meshes used in this study are publicly available for further comparisons.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
Dual virtual element method for discrete fractures networks
Authors:
Alessio Fumagalli,
Eirik Keilegavlen
Abstract:
Discrete fracture networks is a key ingredient in the simulation of physical processes which involve fluid flow in the underground, when the surrounding rock matrix is considered impervious. In this paper we present two different models to compute the pressure field and Darcy velocity in the system. The first allows a normal flow out of a fracture at the intersections, while the second grants also…
▽ More
Discrete fracture networks is a key ingredient in the simulation of physical processes which involve fluid flow in the underground, when the surrounding rock matrix is considered impervious. In this paper we present two different models to compute the pressure field and Darcy velocity in the system. The first allows a normal flow out of a fracture at the intersections, while the second grants also a tangential flow along the intersections. For the numerical discretization, we use the mixed virtual finite element method as it is known to handle grid elements of, almost, any arbitrary shape. The flexibility of the discretization allows us to loosen the requirements on grid construction, and thus significantly simplify the flow discretization compared to traditional discrete fracture network models. A coarsening algorithm, from the algebraic multigrid literature, is also considered to further speed up the computation. The performance of the method is validated by numerical experiments.
△ Less
Submitted 16 August, 2017; v1 submitted 10 October, 2016;
originally announced October 2016.