-
Fluorescence enhancement of single V2 centers in a 4H-SiC cavity antenna
Authors:
Jonathan Körber,
Jonah Heiler,
Philipp Fuchs,
Philipp Flad,
Erik Hesselmeier,
Pierre Kuna,
Jawad Ul-Hassan,
Wolfgang Knolle,
Christoph Becher,
Florian Kaiser,
Jörg Wrachtrup
Abstract:
Solid state quantum emitters are a prime candidate in distributed quantum technologies since they inherently provide a spin-photon interface. An ongoing challenge in the field, however, is the low photon extraction due to the high refractive index of typical host materials. This challenge can be overcome using photonic structures. Here, we report the integration of V2 centers in a cavity-based opt…
▽ More
Solid state quantum emitters are a prime candidate in distributed quantum technologies since they inherently provide a spin-photon interface. An ongoing challenge in the field, however, is the low photon extraction due to the high refractive index of typical host materials. This challenge can be overcome using photonic structures. Here, we report the integration of V2 centers in a cavity-based optical antenna. The structure consists of a silver-coated, 135 nm thin 4H-SiC membrane functioning as a planar cavity with a broadband resonance yielding a theoretical photon collection enhancement factor of 34. The planar geometry allows us to identify over 20 single V2 centers at room temperature with a mean (maximum) count rate enhancement factor of 9 (15). Moreover, we observe 10 V2 centers with a mean absorption linewidth below 80MHz at cryogenic temperatures. These results demonstrate a photon collection enhancement that is robust to the lateral emitter position.
△ Less
Submitted 1 July, 2024; v1 submitted 12 June, 2024;
originally announced June 2024.
-
Photoluminescence of Femtosecond Laser-irradiated Silicon Carbide
Authors:
Y. Abdedou,
A. Fuchs,
P. Fuchs,
D. Herrmann,
S. Weber,
M. Schäfer,
J. L'huillier,
C. Becher,
E. Neu
Abstract:
Silicon carbide (SiC) is the leading wide-bandgap semiconductor material, providing mature do** and device fabrication. Additionally, SiC hosts a multitude of optically active point defects (color centers), it is an excellent material for optical resonators due to its high refractive index and an outstanding material for mechanical resonators due to its high Q/f product. Moreover, epitaxial grap…
▽ More
Silicon carbide (SiC) is the leading wide-bandgap semiconductor material, providing mature do** and device fabrication. Additionally, SiC hosts a multitude of optically active point defects (color centers), it is an excellent material for optical resonators due to its high refractive index and an outstanding material for mechanical resonators due to its high Q/f product. Moreover, epitaxial graphene layers can be grown as ultrathin electrodes and provide the potential to fine-tune color center resonances. These characteristics render SiC an ideal platform for experiments with single color centers towards quantum technologies including coupling color centers towards cooperative effects. A crucial step towards harnessing the full potential of the SiC platform includes technologies to create color centers with defined localization and density, e.g.\ to facilitate their coupling to nano-photonic structures and to observe cooperative effects. Here, silicon vacancy centers (V$_{Si}$) stand out as no impurity atom is needed and high-thermal budget annealing steps can be avoided. We characterize the effect of localized, femtosecond laser irradiation of SiC, investigating surface modifications and photoluminescence including Raman spectroscopy and optical lifetime measurements.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Microwave Control of the Tin-Vacancy Spin Qubit in Diamond with a Superconducting Waveguide
Authors:
Ioannis Karapatzakis,
Jeremias Resch,
Marcel Schrodin,
Philipp Fuchs,
Michael Kieschnick,
Julia Heupel,
Luis Kussi,
Christoph Sürgers,
Cyril Popov,
Jan Meijer,
Christoph Becher,
Wolfgang Wernsdorfer,
David Hunger
Abstract:
Group-IV color centers in diamond are promising candidates for quantum networks due to their dominant zero-phonon line and symmetry-protected optical transitions that connect to coherent spin levels. The negatively charged tin-vacancy (SnV) center possesses long electron spin lifetimes due to its large spin-orbit splitting. However, the magnetic dipole transitions required for microwave spin contr…
▽ More
Group-IV color centers in diamond are promising candidates for quantum networks due to their dominant zero-phonon line and symmetry-protected optical transitions that connect to coherent spin levels. The negatively charged tin-vacancy (SnV) center possesses long electron spin lifetimes due to its large spin-orbit splitting. However, the magnetic dipole transitions required for microwave spin control are suppressed, and strain is necessary to enable these transitions. Recent work has shown spin control of strained emitters using microwave lines that suffer from Ohmic losses, restricting coherence through heating. We utilize a superconducting coplanar waveguide to measure SnV centers subjected to strain, observing substantial improvement. A detailed analysis of the SnV center electron spin Hamiltonian based on the angle-dependent splitting of the ground and excited states is performed. We demonstrate coherent spin manipulation and obtain a Hahn echo coherence time of up to $T_2 = 430\,μ$s. With dynamical decoupling, we can prolong coherence to $T_2 = 10\,$ms, about six-fold improved compared to earlier works. We also observe a nearby coupling $^{13}\mathrm{C}$ spin which may serve as a quantum memory. This substantiates the potential of SnV centers in diamond and demonstrates the benefit of superconducting microwave structures.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Spectral stability of V2 centres in sub-micron 4H-SiC membranes
Authors:
Jonah Heiler,
Jonathan Körber,
Erik Hesselmeier,
Pierre Kuna,
Rainer Stöhr,
Philipp Fuchs,
Misagh Ghezellou,
Jawad Ul-Hassan,
Wolfgang Knolle,
Christoph Becher,
Florian Kaiser,
Jörg Wrachtrup
Abstract:
Colour centres in silicon carbide emerge as a promising semiconductor quantum technology platform with excellent spin-optical coherences.However, recent efforts towards maximising the photonic efficiency via integration into nanophotonic structures proved to be challenging due to reduced spectral stabilities. Here, we provide a large-scale systematic investigation on silicon vacancy centres in thi…
▽ More
Colour centres in silicon carbide emerge as a promising semiconductor quantum technology platform with excellent spin-optical coherences.However, recent efforts towards maximising the photonic efficiency via integration into nanophotonic structures proved to be challenging due to reduced spectral stabilities. Here, we provide a large-scale systematic investigation on silicon vacancy centres in thin silicon carbide membranes with thicknesses down to $0.25\,\rmμm$. Our membrane fabrication process involves a combination of chemical mechanical polishing, reactive ion etching, and subsequent annealing. This leads to highly reproducible membranes with roughness values of $3-4\,\rmÅ$, as well as negligible surface fluorescence. We find that silicon vacancy centres show close-to lifetime limited optical linewidths with almost no signs of spectral wandering down to membrane thicknesses of $0.7 \,\rmμm$. For silicon vacancy centres in thinner membranes down to $0.25\,\rmμm$, we observe spectral wandering, however, optical linewidths remain below $200\,\rm MHz$, which is compatible with spin-selective excitation schemes. Our work clearly shows that silicon vacancy centres can be integrated into sub-micron silicon carbide membranes, which opens the avenue towards obtaining the necessary improvements in photon extraction efficiency based on nanophotonic structuring.
△ Less
Submitted 13 May, 2024; v1 submitted 19 October, 2023;
originally announced October 2023.
-
HySpecNet-11k: A Large-Scale Hyperspectral Dataset for Benchmarking Learning-Based Hyperspectral Image Compression Methods
Authors:
Martin Hermann Paul Fuchs,
Begüm Demir
Abstract:
The development of learning-based hyperspectral image compression methods has recently attracted great attention in remote sensing. Such methods require a high number of hyperspectral images to be used during training to optimize all parameters and reach a high compression performance. However, existing hyperspectral datasets are not sufficient to train and evaluate learning-based compression meth…
▽ More
The development of learning-based hyperspectral image compression methods has recently attracted great attention in remote sensing. Such methods require a high number of hyperspectral images to be used during training to optimize all parameters and reach a high compression performance. However, existing hyperspectral datasets are not sufficient to train and evaluate learning-based compression methods, which hinders the research in this field. To address this problem, in this paper we present HySpecNet-11k that is a large-scale hyperspectral benchmark dataset made up of 11,483 nonoverlap** image patches. Each patch is a portion of 128 $\times$ 128 pixels with 224 spectral bands and a ground sample distance of 30 m. We exploit HySpecNet-11k to benchmark the current state of the art in learning-based hyperspectral image compression by focussing our attention on various 1D, 2D and 3D convolutional autoencoder architectures. Nevertheless, HySpecNet-11k can be used for any unsupervised learning task in the framework of hyperspectral image analysis. The dataset, our code and the pre-trained weights are publicly available at https://hyspecnet.rsim.berlin
△ Less
Submitted 2 June, 2023; v1 submitted 1 June, 2023;
originally announced June 2023.
-
Generative Adversarial Networks for Spatio-Spectral Compression of Hyperspectral Images
Authors:
Martin Hermann Paul Fuchs,
Akshara Preethy Byju,
Alisa Walda,
Behnood Rasti,
Begüm Demir
Abstract:
The development of deep learning-based models for the compression of hyperspectral images (HSIs) has recently attracted great attention in remote sensing due to the sharp growing of hyperspectral data archives. Most of the existing models achieve either spectral or spatial compression, and do not jointly consider the spatio-spectral redundancies present in HSIs. To address this problem, in this pa…
▽ More
The development of deep learning-based models for the compression of hyperspectral images (HSIs) has recently attracted great attention in remote sensing due to the sharp growing of hyperspectral data archives. Most of the existing models achieve either spectral or spatial compression, and do not jointly consider the spatio-spectral redundancies present in HSIs. To address this problem, in this paper we focus our attention on the High Fidelity Compression (HiFiC) model (which is proven to be highly effective for spatial compression problems) and adapt it to perform spatio-spectral compression of HSIs. In detail, we introduce two new models: i) HiFiC using Squeeze and Excitation (SE) blocks (denoted as HiFiC$_{SE}$); and ii) HiFiC with 3D convolutions (denoted as HiFiC$_{3D}$) in the framework of compression of HSIs. We analyze the effectiveness of HiFiC$_{SE}$ and HiFiC$_{3D}$ in compressing the spatio-spectral redundancies with channel attention and inter-dependency analysis. Experimental results show the efficacy of the proposed models in performing spatio-spectral compression, while reconstructing images at reduced bitrates with higher reconstruction quality. The code of the proposed models is publicly available at https://git.tu-berlin.de/rsim/HSI-SSC .
△ Less
Submitted 5 July, 2024; v1 submitted 15 May, 2023;
originally announced May 2023.
-
Perturbing the catenoid: stability and mechanical properties of non-axisymmetric minimal surfaces
Authors:
Friedrich Walzel,
Alice Requier,
Kevin Boschi,
Jean Farago,
Philippe Fuchs,
Fabrice Thalmann,
Wiebke Drenckhan,
Pierre Muller,
Thierry Charitat
Abstract:
Minimal surface problems arise naturally in many soft matter systems whose free energies are dominated by surface or interface energies. Of particular interest are the shapes, stability and mechanical stresses of minimal surfaces spanning specific geometric boundaries. The "catenoid" is the best-known example where an analytical solution is known which describes the form and stability of a minimal…
▽ More
Minimal surface problems arise naturally in many soft matter systems whose free energies are dominated by surface or interface energies. Of particular interest are the shapes, stability and mechanical stresses of minimal surfaces spanning specific geometric boundaries. The "catenoid" is the best-known example where an analytical solution is known which describes the form and stability of a minimal surface held between two parallel, concentric circular frames. Here we extend this problem to non-axisymmetric, parallel frame shapes of different orientations, by develo** a perturbation approach around the known catenoid solution. We show that the predictions of the perturbation theory are in good agreement with experiments on soap films and finite element simulations (Surface Evolver). Combining theory, experiment and simulation, we analyse in depth how the shapes, stability and mechanical properties of the minimal surfaces depend on the type and orientation of elliptical and three-leaf clover shaped frames. In the limit of perfectly aligned non-axisymmetric frames, our predictions show excellent agreement with a recent theory established by Alimov et al (M. M. Alimov, A. V. Bazilevsky and K. G. Kornev, Physics of Fluids, 2021, 33, 052104). Moreover, we put in evidence the intriguing capacity of minimal surfaces between non-axisymmetric frames to transmit a mechanical torque despite being completely liquid. These forces could be interesting to exploit for mechanical self-assembly of soft matter systems or as highly sensitive force captors.
△ Less
Submitted 12 July, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
Coherence of a charge stabilised tin-vacancy spin in diamond
Authors:
Johannes Görlitz,
Dennis Herrmann,
Philipp Fuchs,
Takayuki Iwasaki,
Takashi Taniguchi,
Detlef Rogalla,
David Hardeman,
Pierre-Olivier Colard,
Matthew Markham,
Mutsuko Hatano,
Christoph Becher
Abstract:
Quantum information processing (QIP) with solid state spin qubits strongly depends on the efficient initialisation of the qubit's desired charge state. While the negatively charged tin-vacancy ($\text{SnV}^{-}$) centre in diamond has emerged as an excellent platform for realising QIP protocols due to long spin coherence times at liquid helium temperature and lifetime limited optical transitions, i…
▽ More
Quantum information processing (QIP) with solid state spin qubits strongly depends on the efficient initialisation of the qubit's desired charge state. While the negatively charged tin-vacancy ($\text{SnV}^{-}$) centre in diamond has emerged as an excellent platform for realising QIP protocols due to long spin coherence times at liquid helium temperature and lifetime limited optical transitions, its usefulness is severely limited by termination of the fluorescence under resonant excitation [1,2,3]. Here, we unveil the underlying charge cycle of group IV-vacancy (G4V) centres and exploit it to demonstrate highly efficient initialisation of the desired negative charge state of single SnV centres while preserving long term stable optical resonances. We furthermore all-optically probe the coherence of the ground state spins by means of coherent population trap** and find a spin dephasing time of 5$μ$s. Additionally, we demonstrate proof-of-principle single shot spin state readout without the necessity of a magnetic field aligned to the symmetry axis of the defect.
△ Less
Submitted 27 May, 2022; v1 submitted 11 October, 2021;
originally announced October 2021.
-
A cavity-based optical antenna for color centers in diamond
Authors:
Philipp Fuchs,
Thomas Jung,
Michael Kieschnick,
Jan Meijer,
Christoph Becher
Abstract:
An efficient atom-photon-interface is a key requirement for the integration of solid-state emitters such as color centers in diamond into quantum technology applications. Just like other solid state emitters, however, their emission into free space is severely limited due to the high refractive index of the bulk host crystal. In this work, we present a planar optical antenna based on two silver mi…
▽ More
An efficient atom-photon-interface is a key requirement for the integration of solid-state emitters such as color centers in diamond into quantum technology applications. Just like other solid state emitters, however, their emission into free space is severely limited due to the high refractive index of the bulk host crystal. In this work, we present a planar optical antenna based on two silver mirrors coated on a thin single crystal diamond membrane, forming a planar Fabry-Pérot cavity that improves the photon extraction from single tin vacancy (SnV) centers as well as their coupling to an excitation laser. Upon numerical optimization of the structure, we find theoretical enhancements in the collectible photon rate by a factor of 60 as compared to the bulk case. As a proof-of-principle demonstration, we fabricate single crystal diamond membranes with sub-$μ$m thickness and create SnV centers by ion implantation. Employing off-resonant excitation, we show a 6-fold enhancement of the collectible photon rate, yielding up to half a million photons per second from a single SnV center. At the same time, we observe a significant reduction of the required excitation power in accordance with theory, demonstrating the functionality of the cavity as an optical antenna. Due to its planar design, the antenna simultaneously provides similar enhancements for a large number of emitters inside the membrane. Furthermore, the monolithic structure provides high mechanical stability and straightforwardly enables operation under cryogenic conditions as required in most spin-photon interface implementations.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Generalized Signal Models and Direct FID-Based Dielectric Parameter Retrieval in MRI
Authors:
Patrick Fuchs,
Rob Remis
Abstract:
In this paper we present full-wave signal models for magnetic and electric field measurements in magnetic resonance imaging (MRI). Our analysis is based on a scattering formalism in which the presence of an object or body is taken into account via an electric scattering source. We show that these signal models can be evaluated, provided the Green's tensors of the background field are known along w…
▽ More
In this paper we present full-wave signal models for magnetic and electric field measurements in magnetic resonance imaging (MRI). Our analysis is based on a scattering formalism in which the presence of an object or body is taken into account via an electric scattering source. We show that these signal models can be evaluated, provided the Green's tensors of the background field are known along with the dielectric parameters of the object and the magnetization within the excited part of the object. Furthermore, explicit signal expressions are derived in case of a small homogeneous ball that is embedded in free space and for which the quasi-static Born approximation can be applied. The conductivity and permittivity of the ball appear as explicit parameters in the resulting signal models and allow us to study the sensitivity of the measured signals with respect to these dielectric parameters. Moreover, for free induction decay signals we show that under certain conditions it is possible to retrieve the dielectric parameters of the ball from noise-contaminated induction decay signals that are based on electric or magnetic field measurements.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Gradient Coil Design and Realization for a Halbach-Based MRI System
Authors:
Bart de Vos,
Patrick Fuchs,
Thomas O'Reilly,
Andrew Webb,
Rob Remis
Abstract:
In this paper we design and construct gradient coils for a Halbach permanent magnet array magnetic resonance (MR) scanner. The target field method, which is widely applied for the case of axial static magnetic fields, has been developed for a transverse static magnetic field as produced by a Halbach permanent magnet array. Using this method, current densities for three gradient directions are obta…
▽ More
In this paper we design and construct gradient coils for a Halbach permanent magnet array magnetic resonance (MR) scanner. The target field method, which is widely applied for the case of axial static magnetic fields, has been developed for a transverse static magnetic field as produced by a Halbach permanent magnet array. Using this method, current densities for three gradient directions are obtained and subsequently verified using a commercial magneto-static solver. Stream functions are used to turn the surface current densities into wire patterns for constructing the gradient coils. The measured fields are in good agreement with simulations and their prescribed target fields. Three dimensional images have been acquired using the constructed gradient coils with very low degree of geometric distortion.
△ Less
Submitted 18 December, 2019;
originally announced December 2019.
-
Spectroscopic Investigations of Negatively Charged Tin-Vacancy Centres in Diamond
Authors:
Johannes Görlitz,
Dennis Herrmann,
Gergő Thiering,
Philipp Fuchs,
Morgane Gandil,
Takayuki Iwasaki,
Takashi Taniguchi,
Michael Kieschnick,
Jan Meijer,
Mutsuko Hatano,
Adam Gali,
Christoph Becher
Abstract:
The recently discovered negatively charged tin-vacancy centre in diamond is a promising candidate for applications in quantum information processing (QIP). We here present a detailed spectroscopic study encompassing single photon emission and polarisation properties, the temperature dependence of emission spectra as well as a detailed analysis of the phonon sideband and Debye-Waller factor. Using…
▽ More
The recently discovered negatively charged tin-vacancy centre in diamond is a promising candidate for applications in quantum information processing (QIP). We here present a detailed spectroscopic study encompassing single photon emission and polarisation properties, the temperature dependence of emission spectra as well as a detailed analysis of the phonon sideband and Debye-Waller factor. Using photoluminescence excitation spectroscopy (PLE) we probe an energetically higher lying excited state and prove fully lifetime limited linewidths of single emitters at cryogenic temperatures. For these emitters we also investigate the stability of the charge state under resonant excitation. These results provide a detailed insight into the spectroscopic properties of the $\text{SnV}^-$ centre and lay the foundation for further studies regarding its suitability in QIP.
△ Less
Submitted 11 February, 2020; v1 submitted 20 September, 2019;
originally announced September 2019.
-
Transceive Phase Corrected Contrast Source Inversion-Electrical Properties Tomography
Authors:
Peter R. S. Stijnman,
Stefano Mandija,
Patrick S. Fuchs,
Cornelis A. T. van den Berg,
Rob F. Remis
Abstract:
Magnetic resonance imaging (MRI) based electrical properties tomography (EPT) is the quantification of the conductivity and permittivity of different tissues. These electrical properties can be obtained through different reconstruction methods and can be used as a contrast mechanism. The work presented here continues from the two-dimensional CSI-EPT algorithm which was shown to work with two-dimen…
▽ More
Magnetic resonance imaging (MRI) based electrical properties tomography (EPT) is the quantification of the conductivity and permittivity of different tissues. These electrical properties can be obtained through different reconstruction methods and can be used as a contrast mechanism. The work presented here continues from the two-dimensional CSI-EPT algorithm which was shown to work with two-dimensional Matlab based simulations. The existing CSI-EPT algorithm is reformulated to use the transceive phase rather than relying on the transceive phase assumption. This is achieved by implementing a forward problem, computing the receive phase, into the inverse minimization problem, i.e. retrieving the electrical properties. Furthermore, the radio frequency (RF) shield is numerically implemented to model the RF fields inside the MRI more accurately. Afterwards, the algorithm is tested with three-dimensional FDTD simulations to investigate if the two-dimensional CSI-EPT can retrieve the electrical properties for three-dimensional RF fields. Finally, an MR experiment with a phantom is performed to show the potential for this method. From the results of the two-dimensional Matlab simulations it is seen that CSI-EPT can reconstruct the electrical properties using MRI accessible quantities. In the three-dimensional simulations it is observed that the electrical properties are underestimated, nonetheless, CSI-EPT is more precise than the standard Helmholtz based methods. Finally, the first CSI-EPT results using measured data are shown. The results for the reconstruction using measured data were of the same quality as the results from the FDTD simulation.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Optimized Single-Crystal Diamond Scanning Probes for High Sensitivity Magnetometry
Authors:
Philipp Fuchs,
Michel Challier,
Elke Neu
Abstract:
The negatively-charged nitrogen-vacancy center (NV) in diamond forms a versatile system for quantum sensing applications. Combining the advantageous properties of this atomic-sized defect with scanning probe techniques such as atomic force microscopy (AFM) enables nanoscale imaging of e.g. magnetic fields. To form a scanning probe device, we place single NVs shallowly (i.e. < 20 nm) below the top…
▽ More
The negatively-charged nitrogen-vacancy center (NV) in diamond forms a versatile system for quantum sensing applications. Combining the advantageous properties of this atomic-sized defect with scanning probe techniques such as atomic force microscopy (AFM) enables nanoscale imaging of e.g. magnetic fields. To form a scanning probe device, we place single NVs shallowly (i.e. < 20 nm) below the top facet of a diamond nanopillar, which is located on a thin diamond platform of typically below 1 μm thickness. This device can be attached to an AFM head, forming an excellent scanning probe tip. Furthermore, it simultaneously influences the collectible photoluminescence (PL) rate of the NV located inside. Especially sensing protocols using continuous optically-detected magnetic resonance (ODMR) benefit from an enhanced collectible PL rate, improving the achievable sensitivity. This work presents a comprehensive set of simulations to quantify the influence of the device geometry on the collectible PL rate for individual NVs. Besides geometric parameters (e.g. pillar length, diameter and platform thickness), we also focus on fabrication uncertainties such as the exact position of the NV or the taper geometry of the pillar introduced by imperfect etching. As a last step, we use these individual results to optimize our current device geometry, yielding a realistic gain in collectible PL rate by a factor of 13 compared to bulk diamond and 1.8 compared to our unoptimized devices.
△ Less
Submitted 8 August, 2018;
originally announced August 2018.
-
Light Virtual Reality systems for the training of conditionally automated vehicle drivers
Authors:
Daniele Sportillo,
Alexis Paljic,
Luciano Ojeda,
Philippe Fuchs,
Vincent Roussarie
Abstract:
In conditionally automated vehicles, drivers can engage in secondary activities while traveling to their destination. However, drivers are required to appropriately respond, in a limited amount of time, to a take-over request when the system reaches its functional boundaries. In this context, Virtual Reality systems represent a promising training and learning tool to properly familiarize drivers w…
▽ More
In conditionally automated vehicles, drivers can engage in secondary activities while traveling to their destination. However, drivers are required to appropriately respond, in a limited amount of time, to a take-over request when the system reaches its functional boundaries. In this context, Virtual Reality systems represent a promising training and learning tool to properly familiarize drivers with the automated vehicle and allow them to interact with the novel equipment involved. In this study, the effectiveness of an Head-Mounted display (HMD)-based training program for acquiring interaction skills in automated cars was compared to a user manual and a fixed-base simulator. Results show that the training system affects the take-over performances evaluated in a test drive in a high-end driving simulator. Moreover, self-reported measures indicate that the HMD-based training is preferred with respect to the other systems.
△ Less
Submitted 13 March, 2018;
originally announced March 2018.
-
Stoichiometric and off-stoichiometric full Heusler $\mathbf {Fe_2V_{1-x}W_xAl} $ thermoelectric systems
Authors:
B. Hinterleitner,
P. Fuchs,
J. Rehak,
S. Steiner,
M. Kishimoto,
R. Moser,
R. Podloucky,
E. Bauer
Abstract:
A series of full-Heusler alloys, $\rm Fe_2V_{1-x}W_xAl$, $0 \leq x \leq 0.2$, was prepared, characterized and relevant physical properties to account for the thermoelectric performance were studied in a wide temperature range. Additionally, off-stoichiometric samples with similar compositions have been included, and a 10~\% improvement of the thermoelectric figure of merit was obtained. The V/W su…
▽ More
A series of full-Heusler alloys, $\rm Fe_2V_{1-x}W_xAl$, $0 \leq x \leq 0.2$, was prepared, characterized and relevant physical properties to account for the thermoelectric performance were studied in a wide temperature range. Additionally, off-stoichiometric samples with similar compositions have been included, and a 10~\% improvement of the thermoelectric figure of merit was obtained. The V/W substitution causes i) a change of the main carrier type, from holes to electrons as evidenced from Seebeck and Hall measurements and ii) a substantial reduction of the lattice thermal conductivity due to a creation of lattice disorder by means of a distinct different mass and metallic radius upon the V/W substitution. Moreover $ZT$ values above 0.2 have been obtained. A microscopic understanding of the experimental data observed is revealed from ab-initio calculations of the electronic and phononic structure.
△ Less
Submitted 14 August, 2019; v1 submitted 26 January, 2018;
originally announced January 2018.
-
Color center fluorescence and spin manipulation in single crystal, pyramidal diamond tips
Authors:
Richard Nelz,
Philipp Fuchs,
Oliver Opaluch,
Selda Sonusen,
Natalia Savenko,
Vitali Podgursky,
Elke Neu
Abstract:
We investigate bright fluorescence of nitrogen (NV)- and silicon-vacancy color centers in pyramidal, single crystal diamond tips which are commercially available as atomic force microscope probes. We coherently manipulate NV electronic spin ensembles with $T_2 = 7.7(3)\,μ$s. Color center lifetimes in different tip heights indicate effective refractive index effects and quenching. Using numerical s…
▽ More
We investigate bright fluorescence of nitrogen (NV)- and silicon-vacancy color centers in pyramidal, single crystal diamond tips which are commercially available as atomic force microscope probes. We coherently manipulate NV electronic spin ensembles with $T_2 = 7.7(3)\,μ$s. Color center lifetimes in different tip heights indicate effective refractive index effects and quenching. Using numerical simulations, we verify enhanced photon rates from emitters close to the pyramid apex; a situation promising for scanning probe sensing.
△ Less
Submitted 28 October, 2016; v1 submitted 30 August, 2016;
originally announced August 2016.
-
A higher-order gradient flow scheme for a singular one-dimensional diffusion equation
Authors:
Bertram Düring,
Philipp Fuchs,
Ansgar Jüngel
Abstract:
A nonlinear diffusion equation, interpreted as a Wasserstein gradient flow, is numerically solved in one space dimension using a higher-order minimizing movement scheme based on the BDF (backward differentiation formula) discretization. In each time step, the approximation is obtained as the solution of a constrained quadratic minimization problem on a finite-dimensional space consisting of piecew…
▽ More
A nonlinear diffusion equation, interpreted as a Wasserstein gradient flow, is numerically solved in one space dimension using a higher-order minimizing movement scheme based on the BDF (backward differentiation formula) discretization. In each time step, the approximation is obtained as the solution of a constrained quadratic minimization problem on a finite-dimensional space consisting of piecewise quadratic basis functions. The numerical scheme conserves the mass and dissipates the $G$-norm of the two-step BDF time approximation. Numerically, also the discrete entropy and variance are decaying. The decay turns out to be exponential in all cases. The corresponding decay rates are computed numerically for various grid numbers.
△ Less
Submitted 1 September, 2015;
originally announced September 2015.
-
Towards atomistic resolution structure of phosphatidylcholine glycerol backbone and choline headgroup at different ambient conditions
Authors:
Alexandru Botan,
Andrea Catte,
Fernando Favela,
Patrick Fuchs,
Matti Javanainen,
Waldemar Kulig,
Antti Lamberg,
Markus S. Miettinen,
Luca Monticelli,
Jukka Määttä,
Vasily S. Oganesyan,
O. H. Samuli Ollila,
Marius Retegan,
Hubert Santuz,
Joona Tynkkynen
Abstract:
Phospholipids are essential building blocks of biological membranes. Despite of vast amount of accurate experimental data the atomistic resolution structures sampled by the glycerol backbone and choline headgroup in phoshatidylcholine bilayers are not known. Atomistic resolution molecular dynamics simulation model would automatically resolve the structures giving an interpretation of experimental…
▽ More
Phospholipids are essential building blocks of biological membranes. Despite of vast amount of accurate experimental data the atomistic resolution structures sampled by the glycerol backbone and choline headgroup in phoshatidylcholine bilayers are not known. Atomistic resolution molecular dynamics simulation model would automatically resolve the structures giving an interpretation of experimental results, if the model would reproduce the experimental data. In this work we compare the C-H bond vector order parameters for glycerol backbone and choline headgroup between 14 different atomistic resolution models and experiments in fully hydrated lipid bilayer. The current models are not accurately enough to resolve the structure. However, closer inspection of three best performing models (CHARMM36, GAFFlipid and MacRog) suggest that improvements in the sampled dihedral angle distributions would potentilly lead to the model which would resolve the structure. Despite of the inaccuracy in the fully hydrated structures, the response to the dehydration, i.e. P-N vector tilting more parallel to membrane normal, is qualitatively correct in all models. The CHARMM36 and MacRog models describe the interactions between lipids and cholesterol better than Berger/Höltje model. This work has been, and continues to be, progressed and discussed through the blog: nmrlipids.blogspot.fi. Everyone is invited to join the discussion and make contributions through the blog. The manuscript will be eventually submitted to an appropriate scientific journal. Everyone who has contributed to the work through the blog will be offered coauthorship. For more details see: nmrlipids.blogspot.fi.
△ Less
Submitted 14 January, 2015; v1 submitted 9 September, 2013;
originally announced September 2013.
-
An accurate determination of the Avogadro constant by counting the atoms in a 28Si crystal
Authors:
B. Andreas,
Y. Azuma,
G. Bartl,
P. Becker,
H. Bettin,
M. Borys,
I. Busch,
M. Gray,
P. Fuchs,
K. Fujii,
H. Fujimoto,
E. Kessler,
M. Krumrey,
U. Kuetgens,
N. Kuramoto,
G. Mana,
P. Manson,
E. Massa,
S. Mizushima,
A. Nicolaus,
A. Picard,
A. Pramann,
O. Rienitz,
D. Schiel,
S. Valkiers
, et al. (1 additional authors not shown)
Abstract:
The Avogadro constant links the atomic and the macroscopic properties of matter. Since the molar Planck constant is well known via the measurement of the Rydberg constant, it is also closely related to the Planck constant. In addition, its accurate determination is of paramount importance for a definition of the kilogram in terms of a fundamental constant. We describe a new approach for its determ…
▽ More
The Avogadro constant links the atomic and the macroscopic properties of matter. Since the molar Planck constant is well known via the measurement of the Rydberg constant, it is also closely related to the Planck constant. In addition, its accurate determination is of paramount importance for a definition of the kilogram in terms of a fundamental constant. We describe a new approach for its determination by "counting" the atoms in 1 kg single-crystal spheres, which are highly enriched with the 28Si isotope. It enabled isotope dilution mass spectroscopy to determine the molar mass of the silicon crystal with unprecedented accuracy. The value obtained, 6.02214084(18) x 10^23 mol^-1, is the most accurate input datum for a new definition of the kilogram.
△ Less
Submitted 12 October, 2010;
originally announced October 2010.
