-
New Exclusion Limit for Dark Photons from an SRF Cavity-Based Search (Dark SRF)
Authors:
A. Romanenko,
R. Harnik,
A. Grassellino,
R. Pilipenko,
Y. Pischalnikov,
Z. Liu,
O. S. Melnychuk,
B. Giaccone,
O. Pronitchev,
T. Khabiboulline,
D. Frolov,
S. Posen,
A. Berlin,
A. Hook
Abstract:
We conduct the first ``light-shining-through-wall" (LSW) search for dark photons using two state-of-the-art high quality-factor superconducting radio frequency (SRF) cavities and report the results of its pathfinder run. Our new experimental setup enables improvements in sensitivity over previous searches and covers new dark photon parameter space. We design delicate calibration and measurement pr…
▽ More
We conduct the first ``light-shining-through-wall" (LSW) search for dark photons using two state-of-the-art high quality-factor superconducting radio frequency (SRF) cavities and report the results of its pathfinder run. Our new experimental setup enables improvements in sensitivity over previous searches and covers new dark photon parameter space. We design delicate calibration and measurement protocols to utilize the high-$Q$ setup at Dark SRF. Using cavities operating at $1.3 \ \text{GHz}$, we establish a new exclusion limit for kinetic mixing as small as {$ε= 1.6\times 10^{-9}$} and provide the world's best constraints on dark photons in the $2.1\times 10^{-7} \ \text{eV} - 5.7\times10^{-6} \ \text{eV}$ mass range. Our result is the first proof-of-concept for the enabling role of SRF cavities in LSW setups, with ample opportunities for further improvements. In addition, our data sets a competitive lab-based limit on the Standard Model photon mass by searching for longitudinal photon polarization.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Disentangling the sources of ionizing radiation in superconducting qubits
Authors:
L. Cardani,
I. Colantoni,
A. Cruciani,
F. De Dominicis,
G. D'Imperio,
M. Laubenstein,
A. Mariani,
L. Pagnanini,
S. Pirro,
C. Tomei,
N. Casali,
F. Ferroni,
D. Frolov,
L. Gironi,
A. Grassellino,
M. Junker,
C. Kopas,
E. Lachman,
C. R. H. McRae,
J. Mutus,
M. Nastasi,
D. P. Pappas,
R. Pilipenko,
M. Sisti,
V. Pettinacci
, et al. (5 additional authors not shown)
Abstract:
Radioactivity was recently discovered as a source of decoherence and correlated errors for the real-world implementation of superconducting quantum processors. In this work, we measure levels of radioactivity present in a typical laboratory environment (from muons, neutrons, and gamma's emitted by naturally occurring radioactive isotopes) and in the most commonly used materials for the assembly an…
▽ More
Radioactivity was recently discovered as a source of decoherence and correlated errors for the real-world implementation of superconducting quantum processors. In this work, we measure levels of radioactivity present in a typical laboratory environment (from muons, neutrons, and gamma's emitted by naturally occurring radioactive isotopes) and in the most commonly used materials for the assembly and operation of state-of-the-art superconducting qubits. We develop a GEANT-4 based simulation to predict the rate of impacts and the amount of energy released in a qubit chip from each of the mentioned sources. We finally propose mitigation strategies for the operation of next-generation qubits in a radio-pure environment.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Deepest Sensitivity to Wavelike Dark Photon Dark Matter with SRF Cavities
Authors:
Raphael Cervantes,
Caterina Braggio,
Bianca Giaccone,
Daniil Frolov,
Anna Grassellino,
Roni Harnik,
Oleksandr Melnychuk,
Roman Pilipenko,
Sam Posen,
Alexander Romanenko
Abstract:
Wavelike, bosonic dark matter candidates like axions and dark photons can be detected using microwave cavities commonly referred to as haloscopes. Traditionally, haloscopes consist of tunable copper cavities operating in the TM$_{010}$ mode, but ohmic losses have limited their performance. In contrast, superconducting radio frequency (SRF) cavities can achieve quality factors of $\sim 10^{10}$, pe…
▽ More
Wavelike, bosonic dark matter candidates like axions and dark photons can be detected using microwave cavities commonly referred to as haloscopes. Traditionally, haloscopes consist of tunable copper cavities operating in the TM$_{010}$ mode, but ohmic losses have limited their performance. In contrast, superconducting radio frequency (SRF) cavities can achieve quality factors of $\sim 10^{10}$, perhaps five orders of magnitude better than copper cavities, which would lead to more sensitive dark matter detectors. In this paper, we first derive that the scan rate of a haloscope experiment is proportional to the loaded quality factor $Q_L$, even if the cavity bandwidth is much narrower than the dark matter halo lineshape. We then present a proof-of-concept search for dark photon dark matter using a nontunable ultrahigh quality SRF cavity. We exclude dark photon dark matter with kinetic mixing strengths of $χ> 1.8\times 10^{-16}$ for a dark photon mass of $m_{A^{\prime}} = 5.37μ$eV, achieving the deepest exclusion to wavelike dark photons by almost an order of magnitude.
△ Less
Submitted 10 October, 2022; v1 submitted 5 August, 2022;
originally announced August 2022.
-
High quality superconducting Nb co-planar resonators on sapphire substrate
Authors:
S. Zhu,
F. Crisa,
M. Bal,
A. A. Murthy,
J. Lee,
Z. Sung,
A. Lunin,
D. Frolov,
R. Pilipenko,
D. Bafia,
A. Mitra,
A. Romanenko,
A. Grassellino
Abstract:
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the Nb film residual surface resistance is comparable to that observed in the ultra-high quality, bulk Nb 3D superconducting radio frequency cavities while the reso…
▽ More
We present measurements and simulations of superconducting Nb co-planar waveguide resonators on sapphire substrate down to millikelvin temperature range with different readout powers. In the high temperature regime, we demonstrate that the Nb film residual surface resistance is comparable to that observed in the ultra-high quality, bulk Nb 3D superconducting radio frequency cavities while the resonator quality is dominated by the BCS thermally excited quasiparticles. At low temperature both the resonator quality factor and frequency can be well explained using the two-level system models. Through the energy participation ratio simulations, we find that the two-level system loss tangent is $\sim 10^{-2}$, which agrees quite well with similar studies performed on the Nb 3D cavities.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Searches for New Particles, Dark Matter, and Gravitational Waves with SRF Cavities
Authors:
Asher Berlin,
Sergey Belomestnykh,
Diego Blas,
Daniil Frolov,
Anthony J. Brady,
Caterina Braggio,
Marcela Carena,
Raphael Cervantes,
Mattia Checchin,
Crispin Contreras-Martinez,
Raffaele Tito D'Agnolo,
Sebastian A. R. Ellis,
Grigory Eremeev,
Christina Gao,
Bianca Giaccone,
Anna Grassellino,
Roni Harnik,
Matthew Hollister,
Ryan Janish,
Yonatan Kahn,
Sergey Kazakov,
Doga Murat Kurkcuoglu,
Zhen Liu,
Andrei Lunin,
Alexander Netepenko
, et al. (11 additional authors not shown)
Abstract:
This is a Snowmass white paper on the utility of existing and future superconducting cavities to probe fundamental physics. Superconducting radio frequency (SRF) cavity technology has seen tremendous progress in the past decades, as a tool for accelerator science. With advances spear-headed by the SQMS center at Fermilab, they are now being brought to the quantum regime becoming a tool in quantum…
▽ More
This is a Snowmass white paper on the utility of existing and future superconducting cavities to probe fundamental physics. Superconducting radio frequency (SRF) cavity technology has seen tremendous progress in the past decades, as a tool for accelerator science. With advances spear-headed by the SQMS center at Fermilab, they are now being brought to the quantum regime becoming a tool in quantum science thanks to the high degree of coherence. The same high quality factor can be leveraged in the search for new physics, including searches for new particles, dark matter, including the QCD axion, and gravitational waves. We survey some of the physics opportunities and the required directions of R&D. Given the already demonstrated integration of SRF cavities in large accelerator systems, this R&D may enable larger scale searches by dedicated experiments.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
Measurement of the Low-temperature Loss Tangent of High-resistivity Silicon with a High Q-factor Superconducting Resonator
Authors:
Mattia Checchin,
Daniil Frolov,
Andrei Lunin,
Anna Grassellino,
Alexander Romanenko
Abstract:
In this letter, we present the direct loss tangent measurement of a high-resistivity intrinsic (100) silicon wafer in the temperature range from ~ 70 mK to 1 K, approaching the quantum regime. The measurement was performed using a technique that takes advantage of a high quality factor superconducting niobium resonator and allows to directly measure the loss tangent of insulating materials with hi…
▽ More
In this letter, we present the direct loss tangent measurement of a high-resistivity intrinsic (100) silicon wafer in the temperature range from ~ 70 mK to 1 K, approaching the quantum regime. The measurement was performed using a technique that takes advantage of a high quality factor superconducting niobium resonator and allows to directly measure the loss tangent of insulating materials with high level of accuracy and precision. We report silicon loss tangent values at the lowest temperature and for electric field amplitudes comparable to those found in planar transmon devices one order of magnitude larger than what was previously estimated. In addition, we discover a non-monotonic trend of the loss tangent as a function of temperature that we describe by means of a phenomenological model based on variable range hop** conduction between localized states around the Fermi energy. We also observe that the dissipation increases as a function of the electric field and that this behavior can be qualitatively described by the variable range hop** conduction mechanism as well. This study lays the foundations for a novel approach to investigate the loss mechanisms and accurately estimate the loss tangent in insulating materials in the quantum regime, leading to a better understanding of coherence in quantum devices.
△ Less
Submitted 16 June, 2022; v1 submitted 19 August, 2021;
originally announced August 2021.
-
Overlap junctions for superconducting quantum electronics and amplifiers
Authors:
Mustafa Bal,
Junling Long,
Ruichen Zhao,
Haozhi Wang,
Sungoh Park,
Corey Rae Harrington McRae,
Tongyu Zhao,
Russell E. Lake,
Daniil Frolov,
Roman Pilipenko,
Silvia Zorzetti,
Alexander Romanenko,
David P. Pappas
Abstract:
Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This al…
▽ More
Due to their unique properties as lossless, nonlinear circuit elements, Josephson junctions lie at the heart of superconducting quantum information processing. Previously, we demonstrated a two-layer, submicrometer-scale overlap junction fabrication process suitable for qubits with long coherence times. Here, we extend the overlap junction fabrication process to micrometer-scale junctions. This allows us to fabricate other superconducting quantum devices. For example, we demonstrate an overlap-junction-based Josephson parametric amplifier that uses only 2 layers. This efficient fabrication process yields frequency-tunable devices with negligible insertion loss and a gain of ~ 30 dB. Compared to other processes, the overlap junction allows for fabrication with minimal infrastructure, high yield, and state-of-the-art device performance.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Intrinsic Quality Factor Extraction of Multi-Port Cavity with Arbitrary Coupling
Authors:
D. Frolov
Abstract:
We derived S-parameter based expressions for the intrinsic quality factor of an arbitrary coupled multiport microwave cavity and non-ideal test fixture. Practical accuracy limitations of the obtained expressions specifically for superconducting accelerator cavities were evaluated both analytically and with the simulation software. The resulting formulas can be used to extract intrinsic quality fac…
▽ More
We derived S-parameter based expressions for the intrinsic quality factor of an arbitrary coupled multiport microwave cavity and non-ideal test fixture. Practical accuracy limitations of the obtained expressions specifically for superconducting accelerator cavities were evaluated both analytically and with the simulation software. The resulting formulas can be used to extract intrinsic quality factor of normal conducting and superconducting cavities directly from calibrated S-parameter measurements.
△ Less
Submitted 3 November, 2020; v1 submitted 13 May, 2020;
originally announced May 2020.
-
Experience with Long-pulse Operation of the PIP2IT Warm Front End
Authors:
A. Shemyakin,
J. -P. Carneiro,
A. Chen,
D. Frolov,
B. Hanna,
R. Neswold,
L. Prost,
G. Saewert,
A. Saini,
V. Scarpine,
A. Warner,
J. -Y. Wu,
C. Richard
Abstract:
The warm front end of the PIP2IT accelerator, assem-bled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H- ion source, a 2 m long Low Energy Beam Transport (LEBT) line, and a 2.1 MeV, 162.5 MHz CW RFQ, followed by a 10 m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation with the average beam power emulating the operation of the prop…
▽ More
The warm front end of the PIP2IT accelerator, assem-bled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H- ion source, a 2 m long Low Energy Beam Transport (LEBT) line, and a 2.1 MeV, 162.5 MHz CW RFQ, followed by a 10 m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation with the average beam power emulating the operation of the proposed PIP-II accelera-tor, which will have a duty factor of 1.1% or above. The maximum achieved power is 5 kW (2.1 MeV x 5 mA x 25 ms x 20 Hz). This paper describes the difficulties encoun-tered and some of the solutions that were implemented.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
-
Achieving Balance of Valley Occupancy in Narrow AlAs Quantum Wells
Authors:
A. R. Khisameeva,
A. V. Shchepetilnikov,
V. M. Muravev,
S. I. Gubarev,
D. D. Frolov,
Yu. A. Nefyodov,
I. V. Kukushkin,
C. Reichl,
W. Dietsche,
W. Wegscheider
Abstract:
Terahertz photoconductivity of $100~μ$m and $20~μ$m Hall bars fabricated from narrow AlAs quantum wells (QWs) of different widths is investigated in this paper. The photoresponse is dominated by collective magnetoplasmon excitations within the body of the Hall structure. We observed a radical change of magnetoplasma spectrum measured precisely for AlAs QWs of width ranging from $4$~nm up to $15$~n…
▽ More
Terahertz photoconductivity of $100~μ$m and $20~μ$m Hall bars fabricated from narrow AlAs quantum wells (QWs) of different widths is investigated in this paper. The photoresponse is dominated by collective magnetoplasmon excitations within the body of the Hall structure. We observed a radical change of magnetoplasma spectrum measured precisely for AlAs QWs of width ranging from $4$~nm up to $15$~nm. We have shown that the observed behavior is a vivid manifestation of valley transition taking place in the two-dimensional electron system. Remarkably, we show that photoresponse for AlAs QWs of width $6$~nm features two resonances, indicating simultaneous occupation of strongly anisotropic $X_{x-y}$ valleys and isotropic $X_z$ valley in the QW plane. Our results pave the way to realizing valley-selective layered heterostructures, with potential application in valleytronics.
△ Less
Submitted 23 April, 2019;
originally announced April 2019.
-
Direct observation of $Γ- X$ energy spectrum transition in narrow AlAs quantum wells
Authors:
A. R. Khisameeva,
A. V. Shchepetilnikov,
V. M. Muravev,
S. I. Gubarev,
D. D. Frolov,
Yu. A. Nefyodov,
I. V. Kukushkin,
C. Reichl,
L. Tiemann,
W. Dietsche,
W. Wegscheider
Abstract:
Spectra of magnetoplasma excitations have been investigated in a two-dimensional electron systems in AlAs quantum wells (QWs) of different widths. The magnetoplasma spectrum have been found to change profoundly when the quantum well width became thinner than $5.5$~nm, indicating a drastic change in the conduction electron energy spectrum. The transformation can be interpreted in terms of transitio…
▽ More
Spectra of magnetoplasma excitations have been investigated in a two-dimensional electron systems in AlAs quantum wells (QWs) of different widths. The magnetoplasma spectrum have been found to change profoundly when the quantum well width became thinner than $5.5$~nm, indicating a drastic change in the conduction electron energy spectrum. The transformation can be interpreted in terms of transition from the in-plane strongly anisotropic $X_x - X_y$ valley occupation to the out-of-plane isotropic $X_z$ valley in the QW plane. Strong enhancement of the cyclotron effective mass over the band value in narrow AlAs QWs is reported.
△ Less
Submitted 26 October, 2018;
originally announced October 2018.
-
Three-dimensional superconducting resonators at $T < 20$ mK with the photon lifetime up to $τ=2$ seconds
Authors:
A. Romanenko,
R. Pilipenko,
S. Zorzetti,
D. Frolov,
M. Awida,
S. Belomestnykh,
S. Posen,
A. Grassellino
Abstract:
Very high quality factor superconducting radio frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, as well as offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in the 3D circuit QED architecture. Here we report the first measurements of multiple accelerator cavities…
▽ More
Very high quality factor superconducting radio frequency cavities developed for accelerators can enable fundamental physics searches with orders of magnitude higher sensitivity, as well as offer a path to a 1000-fold increase in the achievable coherence times for cavity-stored quantum states in the 3D circuit QED architecture. Here we report the first measurements of multiple accelerator cavities of $f_0=$1.3, 2.6, 5 GHz resonant frequencies down to temperatures of about 10~mK and field levels down to a few photons, which reveal record high photon lifetimes up to 2 seconds, while also further exposing the role of the two level systems (TLS) in the niobium oxide. We also demonstrate how the TLS contribution can be greatly suppressed by the vacuum heat treatments at 340-450$^\circ$C.
△ Less
Submitted 23 December, 2019; v1 submitted 8 October, 2018;
originally announced October 2018.
-
High Burst Rate Charging System for the Lithium Lens Power Supply
Authors:
H. Pfeffer,
D. Frolov,
C. C. Jensen,
M. E. Kufer,
K. Quinn Jr.
Abstract:
Two pulsed power systems have been upgraded for the g-2 experiment at Fermilab. The Pbar Lithium Lens supply previously ran with a half sine pulsed current of 75 kA peak, 400 us duration and a repetition rate of 0.45 pps. For the g-2 experiment, the peak current was reduced to 25 kA, but the repetition rate was increased to an average of 12 pps. Furthermore, the pulses come in a burst of 8 with 10…
▽ More
Two pulsed power systems have been upgraded for the g-2 experiment at Fermilab. The Pbar Lithium Lens supply previously ran with a half sine pulsed current of 75 kA peak, 400 us duration and a repetition rate of 0.45 pps. For the g-2 experiment, the peak current was reduced to 25 kA, but the repetition rate was increased to an average of 12 pps. Furthermore, the pulses come in a burst of 8 with 10 ms between each of 8 pulses and then a delay until the next burst. The charging rate has gone up by a factor of 20 due to the burst speed. A major challenge for the upgrade was to charge the capacitor bank while kee** the power line loading and charging supply cost to a reasonable level. This paper will discuss how those issues were solved and results from the operational system.
△ Less
Submitted 2 October, 2018; v1 submitted 24 August, 2018;
originally announced August 2018.
-
Simultaneous Switching of Multiple GaN Transistors in a High-Speed Switch
Authors:
Daniil Frolov,
Greg Saewert
Abstract:
A broadband travelling wave kicker operating with 80 MHz repetition rates is required for the new PIP-II accelerator at Fermilab. We present a technique to drive simultaneously four series-connected enhancement mode GaN-on-silicon power transistors by means of microwave photonics techniques. These four transistors are arranged into a high voltage and high repetition rate switch. Using multiple tra…
▽ More
A broadband travelling wave kicker operating with 80 MHz repetition rates is required for the new PIP-II accelerator at Fermilab. We present a technique to drive simultaneously four series-connected enhancement mode GaN-on-silicon power transistors by means of microwave photonics techniques. These four transistors are arranged into a high voltage and high repetition rate switch. Using multiple transistors in series is required to share switching losses. Using a photonic signal distribution system is required to achieve precise synchronization between transistors. We demonstrate 600 V arbitrary pulse generation into a 200 Ohm load with 2 ns rise/fall time. The arbitrary pulse widths can be adjusted from 4 ns to essentially DC.
△ Less
Submitted 23 August, 2018;
originally announced August 2018.
-
First Performance Results Of The PIP2IT MEBT 200 Ohm Kicker Prototype
Authors:
G. Saewert,
M. H. Awida,
B. E. Chase,
A. Chen,
J. Einstein-Curtis,
D. Frolov,
K. Martin,
H. Pfeffer,
D. Wolff,
S. Khole,
D. Sharma
Abstract:
The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chop** system to perform arbitrary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chop** system will consist of two identical kickers working together and a beam absorber. One design of two having…
▽ More
The PIP-II project is a program to upgrade the Fermilab accelerator complex. The PIP-II linac includes a 2.1 MeV Medium Energy Beam Transport (MEBT) section that incorporates a unique chop** system to perform arbitrary, bunch-by-bunch removal of 162.5 MHz structured beam. The MEBT chop** system will consist of two identical kickers working together and a beam absorber. One design of two having been proposed has been a 200 Ohm characteristic impedance traveling wave dual-helix kicker driven with custom designed high-speed switches. This paper reports on the first performance results of one prototype kicker built, installed and tested with beam at the PIP-II Injector Test (PIP2IT) facility. The helix deflector design details are discussed. The electrical performance of the high-speed switch driver operating at 500 V bias is presented. Tests performed were chop** beam at 81.25 MHz for microseconds as well as with a truly arbitrary pattern for 550 $μ$s bursts having a 45 MHz average switching rate and repeating at 20 Hz.
△ Less
Submitted 22 June, 2018;
originally announced June 2018.
-
PIP-II Injector Test Warm Front End: Commissioning Update
Authors:
L. Prost,
R. Andrews,
C. Baffes,
J. -P. Carneiro,
B. Chase,
A. Chen,
E. Cullerton,
P. F. Derwent,
J. P. Edelen,
J. Einstein-Curtis,
D. Frolov,
B. Hanna,
D. Peterson,
G. Saewert,
A. Saini,
V. Scarpine,
A. Shemyakin,
J. Steimel,
D. Sun,
A. Warner,
C. Richard,
V. L. S. Sista
Abstract:
The Warm Front End (WFE) of the Proton Improvement Plan II Injector Test at Fermilab has been constructed to its full length. It includes a 15-mA DC, 30-keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT) with a switching dipole magnet, a 2.1 MeV CW RFQ, followed by a Medium Energy Beam Transport (MEBT) with various diagnostics and a dump. This report presents the commissioning status,…
▽ More
The Warm Front End (WFE) of the Proton Improvement Plan II Injector Test at Fermilab has been constructed to its full length. It includes a 15-mA DC, 30-keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT) with a switching dipole magnet, a 2.1 MeV CW RFQ, followed by a Medium Energy Beam Transport (MEBT) with various diagnostics and a dump. This report presents the commissioning status, focusing on beam measurements in the MEBT. In particular, a beam with the parameters required for injection into the Booster (5 mA, 0.55 ms macro-pulse at 20 Hz) was transported through the WFE.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
Status of the warm front end of PIP-II injector test
Authors:
A. Shemyakin,
M. Alvarez,
R. Andrews,
C. Baffes,
J. -P. Carneiro,
A. Chen,
P. F. Derwent,
J. P. Edelen,
D. Frolov,
B. Hanna,
L. Prost,
A. Saini,
G. Saewert,
V. Scarpine,
V. L. S. Sista,
J. Steimel,
D. Sun,
A. Warner
Abstract:
The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW compatible, pulsed H- SRF linac. To validate the concept of the front-end of such machine, a test accelerator known as PIP-II Injector Test (PIP2IT) is under construction. It includes a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam T…
▽ More
The Proton Improvement Plan II (PIP-II) at Fermilab is a program of upgrades to the injection complex. At its core is the design and construction of a CW compatible, pulsed H- SRF linac. To validate the concept of the front-end of such machine, a test accelerator known as PIP-II Injector Test (PIP2IT) is under construction. It includes a 10 mA DC, 30 keV H- ion source, a 2 m-long Low Energy Beam Transport (LEBT), a 2.1 MeV CWRFQ, followed by a Medium Energy Beam Transport (MEBT) that feeds the first of 2 cryomodules increasing the beam energy to about 25 MeV, and a High Energy Beam Transport section (HEBT) that takes the beam to a dump. The ion source, LEBT, RFQ, and initial version of the MEBT have been built, installed, and commissioned. This report presents the overall status of the warm front end.
△ Less
Submitted 23 March, 2018;
originally announced March 2018.
-
A 600 Volt Multi-Stage, High Repetition Rate GaN FET Switch
Authors:
D. Frolov,
H. Pfeffer,
G. Saewert
Abstract:
Using recently available GaN FETs, a 600 Volt three-stage, multi-FET switch has been developed having 2 nanosecond rise time driving a 200 Ohm load with the potential of approaching 30 MHz average switching rates. Possible applications include driving particle beam choppers kicking bunch-by-bunch and beam deflectors where the rise time needs to be custom tailored. This paper reports on the enginee…
▽ More
Using recently available GaN FETs, a 600 Volt three-stage, multi-FET switch has been developed having 2 nanosecond rise time driving a 200 Ohm load with the potential of approaching 30 MHz average switching rates. Possible applications include driving particle beam choppers kicking bunch-by-bunch and beam deflectors where the rise time needs to be custom tailored. This paper reports on the engineering issues addressed, the design approach taken and some performance results of this switch.
△ Less
Submitted 28 April, 2017;
originally announced May 2017.
-
Nuclear magnetic resonance and nuclear spin relaxation in AlAs quantum well probed by ESR
Authors:
A. V. Shchepetilnikov,
D. D. Frolov,
Yu. A. Nefyodov,
I. V. Kukushkin,
D. S. Smirnov,
L. Tiemann,
C. Reichl,
W. Dietsche,
W. Wegscheider
Abstract:
The study of nuclear magnetic resonance and nuclear spin-lattice relaxation was conducted in an asymmetrically doped to $n\sim1.8\times10^{11}$ cm$^{-2}$ 16 nm AlAs quantum well grown in the $[001]$-direction. Dynamic polarization of nuclear spins due to the hyperfine interaction resulted in the so-called Overhauser shift of the two-dimensional conduction electron spin resonance. The maximum shift…
▽ More
The study of nuclear magnetic resonance and nuclear spin-lattice relaxation was conducted in an asymmetrically doped to $n\sim1.8\times10^{11}$ cm$^{-2}$ 16 nm AlAs quantum well grown in the $[001]$-direction. Dynamic polarization of nuclear spins due to the hyperfine interaction resulted in the so-called Overhauser shift of the two-dimensional conduction electron spin resonance. The maximum shifts achieved in the experiments are several orders of magnitude smaller than in GaAs-based heterostructures indicating that hyperfine interaction is weak. The nuclear spin-lattice relaxation time extracted from the decay of Overhauser shift over time turned out to depend on the filling factor of the two-dimensional electron system. This observation indicates that nuclear spin-lattice relaxation is mostly due to the interaction between electron and nuclear spins. Overhauser shift diminishes resonantly when the RF-radiation of certain frequencies was applied to the sample. This effect served as an indirect, yet powerful method for nuclear magnetic resonance detection: NMR quadrupole splitting of $^{75}$As nuclei was clearly resolved. Theoretical calculations performed describe well these experimental findings.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
Condensation of Silica Nanoparticles on a Phospholipid Membrane
Authors:
V. E. Asadchikov,
V. V. Volkov,
Yu. O. Volkov,
K. A. Dembo,
I. V. Kozhevnikov,
B. S. Roshchin,
D. A. Frolov,
A. M. Tikhonov
Abstract:
The structure of the transient layer at the interface between air and the aqueous solution of silica nanoparticles with the size distribution of particles that has been determined from small-angle scattering has been studied by the X-ray reflectometry method. The reconstructed depth profile of the polarizability of the substance indicates the presence of a structure consisting of several layers of…
▽ More
The structure of the transient layer at the interface between air and the aqueous solution of silica nanoparticles with the size distribution of particles that has been determined from small-angle scattering has been studied by the X-ray reflectometry method. The reconstructed depth profile of the polarizability of the substance indicates the presence of a structure consisting of several layers of nanoparticles with the thickness that is more than twice as large as the thickness of the previously described structure. The adsorption of 1,2-distearoyl-sn-glycero-3-phosphocholine molecules at the hydrosol/air interface is accompanied by the condensation of anion silica nanoparticles at the interface. This phenomenon can be qualitatively explained by the formation of the positive surface potential due to the penetration and accumulation of Na+ cations in the phospholipid membrane.
△ Less
Submitted 3 November, 2011;
originally announced November 2011.
-
Non-Abelian evolution of electromagnetic waves in a weakly anisotropic inhomogeneous medium
Authors:
K. Yu. Bliokh,
D. Yu. Frolov,
Yu. A. Kravtsov
Abstract:
A theory of electromagnetic wave propagation in a weakly anisotropic smoothly inhomogeneous medium is developed, based on the quantum-mechanical diagonalization procedure applied to Maxwell equations. The equations of motion for the translational (ray) and intrinsic (polarization) degrees of freedom are derived ab initio. The ray equations take into account the optical Magnus effect (spin Hall e…
▽ More
A theory of electromagnetic wave propagation in a weakly anisotropic smoothly inhomogeneous medium is developed, based on the quantum-mechanical diagonalization procedure applied to Maxwell equations. The equations of motion for the translational (ray) and intrinsic (polarization) degrees of freedom are derived ab initio. The ray equations take into account the optical Magnus effect (spin Hall effect of photons) as well as trajectory variations owing to the medium anisotropy. Polarization evolution is described by the precession equation for the Stokes vector. In generic case, the evolution of waves turns out to be non-Abelian: it is accompanied by mutual conversion of the normal modes and periodic oscillations of the ray trajectories analogous to electron zitterbewegung. The general theory is applied to examples of wave evolution in media with circular and linear birefringence.
△ Less
Submitted 3 May, 2007; v1 submitted 18 January, 2007;
originally announced January 2007.
-
Spin-orbit interaction of photons and fine splitting of levels in ring dielectric resonator
Authors:
K. Yu. Bliokh,
D. Yu. Frolov
Abstract:
We consider eigenmodes of a ring resonator made of a circular dielectric waveguide. Taking into account the polarization corrections, which are responsible for the interaction of polarization and orbital properties of electromagnetic waves (spin-orbit interaction of photons), results in fine splitting of the levels of scalar approximation. The basic features of this fine structure of the levels…
▽ More
We consider eigenmodes of a ring resonator made of a circular dielectric waveguide. Taking into account the polarization corrections, which are responsible for the interaction of polarization and orbital properties of electromagnetic waves (spin-orbit interaction of photons), results in fine splitting of the levels of scalar approximation. The basic features of this fine structure of the levels are similar to that of electron levels in an atom. Namely: 1) sublevels of the fine structure are defined by an additional quantum number: product of helicity of the wave and its orbital moment; 2) for a waveguide with a parabolic profile of the refractive index each level of the scalar approximation splits into N sublevels (N is the principal quantum number), while for any other profile it splits into 2 sublevels; 3) each level of the fine structure remains twice degenerated due to local axial symmetry of the waveguide. Numerical estimations show that the described fine splitting of levels may be observed in optic-fiber ring resonators.
△ Less
Submitted 3 June, 2005; v1 submitted 15 December, 2004;
originally announced December 2004.
