-
Conditioned outputs, distribution of decision times and measurement-based feedback scheme for continuous weak linear measurement of a simple quantum system
Authors:
A. Franquet,
N. C. Kruse,
B. Vervliet,
Yuli V. Nazarov
Abstract:
We address the peculiarities of the quantum measurement process in the course of a continuous weak linear measurement (CWLM). As a tool, we implement an efficient numerical simulation scheme that allows us to generate single quantum trajectories of the measured system state as well as the recorded detector signal, and study statistics of these trajectories with and without post-selection. In this…
▽ More
We address the peculiarities of the quantum measurement process in the course of a continuous weak linear measurement (CWLM). As a tool, we implement an efficient numerical simulation scheme that allows us to generate single quantum trajectories of the measured system state as well as the recorded detector signal, and study statistics of these trajectories with and without post-selection. In this scheme, a linear detector is modelled with a qubit that is weakly coupled to the quantum system measured and is subject to projective measurement and re-initialization after a time interval at each simulation step. We explain the conditions under which the scheme provides an accurate description of CWLM.
We restrict ourselves to a qubit non-demolition measurement. The qubit is initially in an equal-weight superposition of two quantum states. In the course of time, the detector signal is accumulated and the superposition is destroyed. The times required to resolve the quantum states and to destroy the superposition are of the same order. We prove numerically a rather counter intuitive fact: the average detector output conditioned on the final state does not depend on time. It looks like from the very beginning, the qubit knows in which state it is. We study statistics of decision times where the decision time is defined as time required for the density matrix along a certain trajectory to reach a threshold where it is close to one of the resulting states. This statistics is useful to estimate how fast a decisive CWLM can be. Basing on this, we devise and study a simple feedback scheme that attempts to keep the qubit in the equal-weight superposition. The detector readings are used to decide in which state the qubit is and which correction rotation to apply to bring it back to the superposition. We show how to optimize the feedback parameters and move towards more efficient feedback schemes.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
Statistics of continuous weak quantum measurement of an arbitrary quantum system with multiple detectors
Authors:
Albert Franquet,
Yuli V. Nazarov,
Hongduo Wei
Abstract:
In this paper, we establish a general theoretical framework for the description of continuous quantum measurements and the statistics of the results of such measurements. The framework concerns the measurement of an arbitrary quantum system with arbitrary number of detectors under realistic assumption of instant detector reactions and white noise sources. We attend various approaches to the proble…
▽ More
In this paper, we establish a general theoretical framework for the description of continuous quantum measurements and the statistics of the results of such measurements. The framework concerns the measurement of an arbitrary quantum system with arbitrary number of detectors under realistic assumption of instant detector reactions and white noise sources. We attend various approaches to the problem showing their equivalence. The approaches include the full counting statistics (FCS) evolution equation a for pseudo-density matrix, the drift-diffusion equation for a density matrix in the space of integrated outputs, and discrete stochastic updates. We provide the derivation of the underlying equations from a microscopic approach based on full counting statistics method, a phenomenological approach based on Lindblad construction, and interaction with auxiliary quantum systems representing the detectors. We establish the necessary conditions on the phenomenological susceptibilities and noises that guarantee the unambiguous interpretation of the measurement results and the positivity of the density matrix. Our results can be easily extended to describe various quantum feedback schemes where the manipulation decision is based on the values of detector outputs.
△ Less
Submitted 20 April, 2018;
originally announced April 2018.
-
Organic and perovskite solar cells for space applications
Authors:
Ilaria Cardinaletti,
Tim Vangerven,
Steven Nagels,
Rob Cornelissen,
Dieter Schreurs,
Jaroslav Hruby,
Jelle Vodnik,
Dries Devisscher,
Jurgen Kesters,
Jan DHaen,
Alexis Franquet,
Valentina Spampinato,
Thierry Conard,
Wouter Maes,
Wim Deferme,
Jean V. Manca
Abstract:
For almost sixty years, solar energy for space applications has relied on inorganic photovoltaics, evolving from solar cells made of single crystalline silicon to triple junctions based on germanium and III-V alloys. The class of organic-based photovoltaics, which ranges from all-organic to hybrid perovskites, has the potential of becoming a disruptive technology in space applications, thanks to t…
▽ More
For almost sixty years, solar energy for space applications has relied on inorganic photovoltaics, evolving from solar cells made of single crystalline silicon to triple junctions based on germanium and III-V alloys. The class of organic-based photovoltaics, which ranges from all-organic to hybrid perovskites, has the potential of becoming a disruptive technology in space applications, thanks to the unique combination of appealing intrinsic properties (e.g. record high specific power, tunable absorption window) and processing possibilities. Here, we report on the launch of the stratospheric mission OSCAR, which demonstrated for the first time organic-based solar cell operation in extra-terrestrial conditions. This successful maiden flight for organic-based photovoltaics opens a new paradigm for solar electricity in space, from satellites to orbital and planetary space stations.
△ Less
Submitted 7 April, 2018; v1 submitted 28 August, 2017;
originally announced September 2017.
-
Probability distributions of continuous measurement results for two non-commuting variables and conditioned quantum evolution
Authors:
A. Franquet,
Yuli V. Nazarov
Abstract:
We address the statistics of a simultaneous CWLM of two non-commuting variables on a few-state quantum system subject to a conditioned evolution. Both conditioned quantum measurement and that of two non-commuting variables differ drastically for either classical or quantum projective measurement, and we explore the peculiarities brought by the combination of the two.
We put forward a proper form…
▽ More
We address the statistics of a simultaneous CWLM of two non-commuting variables on a few-state quantum system subject to a conditioned evolution. Both conditioned quantum measurement and that of two non-commuting variables differ drastically for either classical or quantum projective measurement, and we explore the peculiarities brought by the combination of the two.
We put forward a proper formalism for the evaluation of the distributions of measurement outcomes. We compute and discuss the statistics in idealized and experimentally relevant setups. We demonstrate the visibility and manifestations of the interference between initial and final states in the statistics of measurement outcomes for both variables in various regimes.
We analytically predict the peculiarities at the circle ${\cal O}^2_1+{\cal O}^2_2=1$ in the distribution of measurement outcomes in the limit of short measurement times and confirm this by numerical calculation at longer measurement times. We demonstrate analytically anomalously large values of the time-integrated output cumulants in the limit of short measurement times(sudden jump) and zero overlap between initial and final states, and give the detailed distributions. We present the numerical evaluation of the probability distributions for experimentally relevant parameters in several regimes and demonstrate that interference effects in the conditioned measurement can be accurately predicted even if they are small.
△ Less
Submitted 18 August, 2017;
originally announced August 2017.
-
Seed Layer Impact on Structural and Magnetic Properties of [Co/Ni] Multilayers with Perpendicular Magnetic Anisotropy
Authors:
Enlong Liu,
J. Swerts,
T. Devolder,
S. Couet,
S. Mertens,
T. Lin,
V. Spampinato,
A. Franquet,
T. Conard,
S. Van Elshocht,
A. Furnemont,
J. De Boeck,
G. Kar
Abstract:
[Co/Ni] multilayers with perpendicular magnetic anisotropy (PMA) have been researched and applied in various spintronic applications. Typically the seed layer material is studied to provide the desired face-centered cubic (\textit{fcc}) texture to the [Co/Ni] to obtain PMA. The integration of [Co/Ni] in back-end-of-line (BEOL) processes also requires the PMA to survive post-annealing. In this pape…
▽ More
[Co/Ni] multilayers with perpendicular magnetic anisotropy (PMA) have been researched and applied in various spintronic applications. Typically the seed layer material is studied to provide the desired face-centered cubic (\textit{fcc}) texture to the [Co/Ni] to obtain PMA. The integration of [Co/Ni] in back-end-of-line (BEOL) processes also requires the PMA to survive post-annealing. In this paper, the impact of NiCr, Pt, Ru, and Ta seed layers on the structural and magnetic properties of [Co(0.3 nm)/Ni(0.6 nm)] multilayers is investigated before and after annealing. The multilayers were deposited \textit{in-situ} on different seeds via physical vapor deposition at room temperature. The as-deposited [Co/Ni] films show the required \textit{fcc}(111) texture on all seeds, but PMA is only observed on Pt and Ru. In-plane magnetic anisotropy (IMA) is obtained on NiCr and Ta seeds, which is attributed to strain-induced PMA loss. PMA is maintained on all seeds after post-annealing up to 400$^{\circ}$C. The largest effective perpendicular anisotropy energy ($K_U^{\mathrm{eff}}\approx 2\times10^5$J/m$^3$) after annealing is achieved on NiCr seed. The evolution of PMA upon annealing cannot be explained by further crystallization during annealing or strain-induced PMA, nor can the observed magnetization loss and the increased dam** after annealing. Here we identify the diffusion of the non-magnetic materials from the seed into [Co/Ni] as the major driver of the changes in the magnetic properties. By selecting the seed and post-annealing temperature, the [Co/Ni] can be tuned in a broad range for both PMA and dam**.
△ Less
Submitted 26 January, 2017;
originally announced January 2017.
-
Probability distributions of continuous measurement results for conditioned quantum evolution
Authors:
A. Franquet,
Yuli V. Nazarov
Abstract:
We address the statistics of continuous weak linear measurement on a few-state quantum system that is subject to a conditioned quantum evolution. For a conditioned evolution, both the initial and final states of the system are fixed: the latter is achieved by the post-selection in the end of the evolution. The statistics may drastically differ from the non-conditioned case, and the interference be…
▽ More
We address the statistics of continuous weak linear measurement on a few-state quantum system that is subject to a conditioned quantum evolution. For a conditioned evolution, both the initial and final states of the system are fixed: the latter is achieved by the post-selection in the end of the evolution. The statistics may drastically differ from the non-conditioned case, and the interference between initial and final states can be observed in the probability distributions of measurement outcomes as well as in the average values exceeding the conventional range of non-conditioned averages. We develop a proper formalism to compute the distributions of measurement outcomes, evaluate and discuss the distributions in experimentally relevant setups. We demonstrate the manifestations of the interference between initial and final states in various regimes. We consider analytically simple examples of non-trivial probability distributions. We reveal peaks (or dips) at half-quantized values of the measurement outputs. We discuss in detail the case of zero overlap between initial and final states demonstrating anomalously big average outputs and sudden jump in time-integrated output. We present and discuss the numerical evaluation of the probability distribution aiming at extend- ing the analytic results and describing a realistic experimental situation of a qubit in the regime of resonant fluorescence.
△ Less
Submitted 22 February, 2017; v1 submitted 24 August, 2016;
originally announced August 2016.
-
Identification of Heterogeneous Elastic Properties in Stenosed Arteries: a Numerical Plane Strain Study
Authors:
Alexandre Franquet,
Stéphane Avril,
Pierre Badel,
Rodolphe Le Riche
Abstract:
Assessing the vulnerability of atherosclerotic plaques requires an accurate knowledge of the mechanical properties of the plaque constituents. It is possible to measure displacements in vivo inside a plaque using magnetic resonance imaging. An important issue is to solve the inverse problem that consists in estimating the elastic properties inside the plaque from measured displacements. This study…
▽ More
Assessing the vulnerability of atherosclerotic plaques requires an accurate knowledge of the mechanical properties of the plaque constituents. It is possible to measure displacements in vivo inside a plaque using magnetic resonance imaging. An important issue is to solve the inverse problem that consists in estimating the elastic properties inside the plaque from measured displacements. This study focuses on the identifiability of elastic parameters e.g. on the compromise between identification time and identification accuracy. An idealised plane strain. Finite Element (FE) model is used. The effects of the FE mesh, of the a priori assumptions about the constituents, of the measurement resolution and of the data noise are numerically investigated.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.