-
Surface-emitting electroholographic SAW modulator
Authors:
Joy C. Perkinson,
Michael G. Moebius,
Elizabeth J. Brundage,
William A. Teynor,
Steven J. Byrnes,
James C. Hsiao,
William D. Sawyer,
Dennis M. Callahan,
Ian W. Frank,
John J. LeBlanc,
Gregg E. Favalora
Abstract:
We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region…
▽ More
We report the design and operation of a surface-emitting surface acoustic wave (SAW) acousto-optical modulator which behaves as a cm-scale linear hologram in response to an applied electronic waveform. The modulator is formed by an optical waveguide, transducer, and out-coupling surface grating on a 1 mm-thick lithium niobate substrate. We demonstrate the ability to load and illuminate a 9-region linear hologram into the modulator's 8 mm-long interaction region using applied waveforms of 280-320 MHz. To the best of the authors' knowledge, this is the first demonstration of a monolithically-integrated, surface-emitting SAW modulator fabricated using lithographic techniques. Applications include practical implementations of a holographic display.
△ Less
Submitted 17 June, 2019;
originally announced June 2019.
-
Error Correction in Structured Optical Receivers
Authors:
Alec M. Hammond,
Ian W. Frank,
Ryan M. Camacho
Abstract:
Integrated optics Green Machines enable better communication in photon-starved environments, but fabrication inconsistencies induce unpredictable internal phase errors, making them difficult to construct. We describe and experimentally demonstrate a new method to compensate for arbitrary phase errors by deriving a convex error space and implementing an algorithm to learn a unique codebook of codew…
▽ More
Integrated optics Green Machines enable better communication in photon-starved environments, but fabrication inconsistencies induce unpredictable internal phase errors, making them difficult to construct. We describe and experimentally demonstrate a new method to compensate for arbitrary phase errors by deriving a convex error space and implementing an algorithm to learn a unique codebook of codewords corresponding to each matrix.
△ Less
Submitted 27 February, 2018;
originally announced February 2018.
-
Nanomechanical resonant structures in single-crystal diamond
Authors:
Michael J. Burek,
Daniel Ramos,
Parth Patel,
Ian W. Frank,
Marko LonĨar
Abstract:
With its host of outstanding material properties, single-crystal diamond is an attractive material for nanomechanical systems. Here, the mechanical resonance characteristics of freestanding, single-crystal diamond nanobeams fabricated by an angled-etching methodology are reported. Resonance frequencies displayed evidence of significant compressive stress in doubly clamped diamond nanobeams, while…
▽ More
With its host of outstanding material properties, single-crystal diamond is an attractive material for nanomechanical systems. Here, the mechanical resonance characteristics of freestanding, single-crystal diamond nanobeams fabricated by an angled-etching methodology are reported. Resonance frequencies displayed evidence of significant compressive stress in doubly clamped diamond nanobeams, while cantilever resonance modes followed the expected inverse-length-squared trend. Q-factors on the order of 104 were recorded in high vacuum. Results presented here represent initial groundwork for future diamond-based nanomechanical systems which may be applied in both classical and quantum applications.
△ Less
Submitted 7 September, 2013;
originally announced September 2013.
-
Broadband Reconfiguration of OptoMechanical Filters
Authors:
Parag B. Deotare,
Irfan Bulu,
Ian W. Frank,
Qimin Quan,
Yinan Zhang,
Rob Ilic,
Marko Loncar
Abstract:
We demonstrate broad-band reconfiguration of coupled photonic crystal nanobeam cavities by using optical gradient force induced mechanical actuation. Propagating waveguide modes that exist over wide wavelength range are used to actuate the structures and in that way control the resonance of localized cavity mode. Using this all-optical approach, more than 18 linewidths of tuning range is demonstra…
▽ More
We demonstrate broad-band reconfiguration of coupled photonic crystal nanobeam cavities by using optical gradient force induced mechanical actuation. Propagating waveguide modes that exist over wide wavelength range are used to actuate the structures and in that way control the resonance of localized cavity mode. Using this all-optical approach, more than 18 linewidths of tuning range is demonstrated. Using on-chip temperature self-referencing method that we developed, we determined that 20 % of the total tuning was due to optomechanical reconfiguration and the rest due to thermo-optic effects. Independent control of mechanical and optical resonances of our structures, by means of optical stiffening, is also demonstrated.
△ Less
Submitted 15 January, 2012;
originally announced January 2012.
-
Dynamically Reconfigurable Photonic Crystal Nanobeam Cavities
Authors:
Ian W. Frank,
Parag B. Deotare,
Murray W. McCutcheon,
Marko Loncar
Abstract:
Wavelength-scale, high Q-factor photonic crystal cavities have emerged as a platform of choice for on-chip manipulation of optical signals, with applications ranging from low-power optical signal processing and cavity quantum electrodynamics, to biochemical sensing. Many of these applications, however, are limited by the fabrication tolerances and the inability to precisely control the resonant…
▽ More
Wavelength-scale, high Q-factor photonic crystal cavities have emerged as a platform of choice for on-chip manipulation of optical signals, with applications ranging from low-power optical signal processing and cavity quantum electrodynamics, to biochemical sensing. Many of these applications, however, are limited by the fabrication tolerances and the inability to precisely control the resonant wavelength of fabricated structures. Various techniques for post-fabrication wavelength trimming and dynamical wavelength control -- using, for example, thermal effects, free carrier injection, low temperature gas condensation, and immersion in fluids -- have been explored. However, these methods are often limited by small tuning ranges, high power consumption, or the inability to tune continuously or reversibly. In this letter, by combining nano-electro-mechanical systems (NEMS) and nanophotonics, we demonstrate reconfigurable photonic crystal nanobeam cavities that can be continuously and dynamically tuned using electrostatic forces. A tuning of ~10 nm has been demonstrated with less than 6 V of external bias and negligible steady-state power consumption.
△ Less
Submitted 11 September, 2009;
originally announced September 2009.
-
Coupled photonic crystal nanobeam cavities
Authors:
Parag B. Deotare,
Murray W. McCutcheon,
Ian W. Frank,
Mughees Khan,
Marko Loncar
Abstract:
We describe the design, fabrication, and spectroscopy of coupled, high Quality (Q) factor silicon nanobeam photonic crystal cavities. We show that the single nanobeam cavity modes are coupled into even and odd superposition modes, and we simulate the frequency and Q factor as a function of nanobeam spacing, demonstrating that a differential wavelength shift of 70 nm between the two modes is poss…
▽ More
We describe the design, fabrication, and spectroscopy of coupled, high Quality (Q) factor silicon nanobeam photonic crystal cavities. We show that the single nanobeam cavity modes are coupled into even and odd superposition modes, and we simulate the frequency and Q factor as a function of nanobeam spacing, demonstrating that a differential wavelength shift of 70 nm between the two modes is possible while maintaining Q factors greater than 10^6. For both on-substrate and free-standing nanobeams, we experimentally monitor the response of the even mode as the gap is varied, and measure Q factors as high as 200,000.
△ Less
Submitted 1 May, 2009;
originally announced May 2009.
-
High Quality factor photonic crystal nanobeam cavities
Authors:
Parag B. Deotare,
Murray W. McCutcheon,
Ian W. Frank,
Mughees Khan,
Marko Loncar
Abstract:
We investigate the design, fabrication and experimental characterization of high Quality factor photonic crystal nanobeam cavities in silicon. Using a five-hole tapered 1D photonic crystal mirror and precise control of the cavity length, we designed cavities with theoretical Quality factors as high as 14 million. By detecting the cross-polarized resonantly scattered light from a normally inciden…
▽ More
We investigate the design, fabrication and experimental characterization of high Quality factor photonic crystal nanobeam cavities in silicon. Using a five-hole tapered 1D photonic crystal mirror and precise control of the cavity length, we designed cavities with theoretical Quality factors as high as 14 million. By detecting the cross-polarized resonantly scattered light from a normally incident laser beam, we measure a Quality factor of nearly 750,000. The effect of cavity size on mode frequency and Quality factor was simulated and then verified experimentally.
△ Less
Submitted 5 February, 2009; v1 submitted 27 January, 2009;
originally announced January 2009.