-
Resonance and Dam** in Drop-Cantilever Interactions
Authors:
Crystal Fowler,
Rehan Marshall,
Maeji Son,
Sunghwan Jung
Abstract:
In this study, we investigated the dynamics of a droplet impacting and oscillating a polycarbonate cantilever beam of nine varying lengths. We analyzed the cantilever's dam** and vibration frequency in relation to a resonance length, where the frequencies of the droplet and the cantilever are equal. In the pre-resonance length, the beam vibrates at a frequency higher than that of the droplet. Up…
▽ More
In this study, we investigated the dynamics of a droplet impacting and oscillating a polycarbonate cantilever beam of nine varying lengths. We analyzed the cantilever's dam** and vibration frequency in relation to a resonance length, where the frequencies of the droplet and the cantilever are equal. In the pre-resonance length, the beam vibrates at a frequency higher than that of the droplet. Upon reaching resonance, the frequencies of both the droplet and the cantilever align, and the cantilever is out of phase with the oscillation of the droplet's apex. This leads to increased dam** rates. At this resonance length, the droplet's force and the direction of the cantilever oppose each other. When the cantilever length exceeds the resonance length, it synchronize more with the droplet apex. This alignment allows the droplet force and the cantilever to work in phase. Our findings provide fundamental insights into the dam** effect of droplet impacts on elastic surfaces around resonance.
△ Less
Submitted 26 June, 2024;
originally announced June 2024.
-
Alfvén Waves at Mars
Authors:
Norberto Romanelli,
Christopher M. Fowler,
Gina A. DiBraccio,
Jared R. Espley,
Jasper S. Halekas
Abstract:
The solar wind upstream of Mars's bow shock can be described in terms of Alfvénic turbulence, with an incompressible energy cascade rate of $10^{-17}$ J m$^{-3}$ s$^{-1}$ at magnetohydrodynamics (MHD) scales. The solar wind has more Alfvén waves propagating outwards from the Sun (than inwards) and a median Alfvén ratio of $\sim0.33$. Newly ionized planetary protons associated with the extended hyd…
▽ More
The solar wind upstream of Mars's bow shock can be described in terms of Alfvénic turbulence, with an incompressible energy cascade rate of $10^{-17}$ J m$^{-3}$ s$^{-1}$ at magnetohydrodynamics (MHD) scales. The solar wind has more Alfvén waves propagating outwards from the Sun (than inwards) and a median Alfvén ratio of $\sim0.33$. Newly ionized planetary protons associated with the extended hydrogen corona generate waves at the local proton cyclotron frequency. These 'proton cyclotron waves' (PCW) mostly correspond to fast magnetosonic waves, although the ion cyclotron (Alfvénic) wave mode is possible for large Interplanetary Magnetic Field cone angles. PCW do not show significant effects on the solar wind energy cascade rates at MHD scales but could affect smaller scales. The magnetosheath displays high amplitude wave activity, with high occurrence rate of Alfvén waves. Turbulence appears not fully developed in the magnetosheath, suggesting fluctuations do not have enough time to interact in this small-size region. Some studies suggest PCW affect turbulence in the magnetosheath. Overall, wave activity is reduced inside the magnetic pile-up region and the Martian ionosphere. However, under certain conditions, upstream waves can reach the upper ionosphere. So far, there have not been conclusive observations of Alfvén waves in the ionosphere or along crustal magnetic fields, which could be due to the lack of adequate observations.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Comparison of open-source software for producing directed acyclic graphs
Authors:
Amy J. Pitts,
Charlotte R. Fowler
Abstract:
Many software packages have been developed to assist researchers in drawing directed acyclic graphs (DAGs), each with unique functionality and usability. We examine five of the most common software to generate DAGs: TikZ, DAGitty, ggdag, dagR, and igraph. For each package, we provide a general description of the its background, analysis and visualization capabilities, and user-friendliness. Additi…
▽ More
Many software packages have been developed to assist researchers in drawing directed acyclic graphs (DAGs), each with unique functionality and usability. We examine five of the most common software to generate DAGs: TikZ, DAGitty, ggdag, dagR, and igraph. For each package, we provide a general description of the its background, analysis and visualization capabilities, and user-friendliness. Additionally in order to compare packages, we produce two DAGs in each software, the first featuring a simple confounding structure, while the second includes a more complex structure with three confounders and a mediator. We provide recommendations for when to use each software depending on the user's needs.
△ Less
Submitted 30 August, 2023; v1 submitted 19 May, 2023;
originally announced May 2023.
-
Testing unit root non-stationarity in the presence of missing data in univariate time series of mobile health studies
Authors:
Charlotte Fowler,
Xiaoxuan Cai,
Justin T. Baker,
Jukka-Pekka Onnela,
Linda Valeri
Abstract:
The use of digital devices to collect data in mobile health (mHealth) studies introduces a novel application of time series methods, with the constraint of potential data missing at random (MAR) or missing not at random (MNAR). In time series analysis, testing for stationarity is an important preliminary step to inform appropriate later analyses. The augmented Dickey-Fuller (ADF) test was develope…
▽ More
The use of digital devices to collect data in mobile health (mHealth) studies introduces a novel application of time series methods, with the constraint of potential data missing at random (MAR) or missing not at random (MNAR). In time series analysis, testing for stationarity is an important preliminary step to inform appropriate later analyses. The augmented Dickey-Fuller (ADF) test was developed to test the null hypothesis of unit root non-stationarity, under no missing data. Beyond recommendations under data missing completely at random (MCAR) for complete case analysis or last observation carry forward imputation, researchers have not extended unit root non-stationarity testing to a context with more complex missing data mechanisms. Multiple imputation with chained equations, Kalman smoothing imputation, and linear interpolation have also been proposed for time series data, however such methods impose constraints on the autocorrelation structure, and thus impact unit root testing. We propose maximum likelihood estimation and multiple imputation using state space model approaches to adapt the ADF test to a context with missing data. We further develop sensitivity analysis techniques to examine the impact of MNAR data. We evaluate the performance of existing and proposed methods across different missing mechanisms in extensive simulations and in their application to a multi-year smartphone study of bipolar patients.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Outbursts and stellar properties of the classical Be star HD 6226
Authors:
Noel D. Richardson,
Olivier Thizy,
Jon E. Bjorkman,
Alex Carciofi,
Amanda C. Rubio,
Joshua D. Thomas,
Karen S. Bjorkman,
Jonathan Labadie-Bartz,
Matheus Genaro,
John P. Wisniewski,
Luqian Wang,
Douglas R. Gies,
S. Drew Chojnowski,
Andrea Daly,
Thompson Edwards,
Carlie Fowler,
Allison D. Gullingsrud,
Nolan Habel,
David J. James,
Emily Kehoe,
Heidi Kuchta,
Alexis Lane,
Anatoly Miroshnichenko,
Ashish Mishra,
Herbert Pablo
, et al. (36 additional authors not shown)
Abstract:
The bright and understudied classical Be star HD 6226 has exhibited multiple outbursts in the last several years during which the star grew a viscous decretion disk. We analyze 659 optical spectra of the system collected from 2017-2020, along with a UV spectrum from the Hubble Space Telescope and high cadence photometry from both TESS and the KELT survey. We find that the star has a spectral type…
▽ More
The bright and understudied classical Be star HD 6226 has exhibited multiple outbursts in the last several years during which the star grew a viscous decretion disk. We analyze 659 optical spectra of the system collected from 2017-2020, along with a UV spectrum from the Hubble Space Telescope and high cadence photometry from both TESS and the KELT survey. We find that the star has a spectral type of B2.5IIIe, with a rotation rate of 74% of critical. The star is nearly pole-on with an inclination of $13.4$ degree. We confirm the spectroscopic pulsational properties previously reported, and report on three photometric oscillations from KELT photometry. The outbursting behavior is studied with equivalent width measurements of H$α$ and H$β$, and the variations in both of these can be quantitatively explained with two frequencies through a Fourier analysis. One of the frequencies for the emission outbursts is equal to the difference between two photometric oscillations, linking these pulsation modes to the mass ejection mechanism for some outbursts. During the TESS observation time period of 2019 October 7 to 2019 November 2, the star was building a disk. With a large dataset of H$α$ and H$β$ spectroscopy, we are able to determine the timescales of dissipation in both of these lines, similar to past work on Be stars that has been done with optical photometry. HD 6226 is an ideal target with which to study the Be disk-evolution given its apparent periodic nature, allowing for targeted observations with other facilities in the future.
△ Less
Submitted 22 September, 2021;
originally announced September 2021.
-
The Influence of Magnetic Field Topology and Orientation on the Distribution of Thermal Electrons in the Martian Magnetotail
Authors:
Murti Nauth,
Christopher M. Fowler,
Laila Andersson,
Gina A. DiBraccio,
Shaosui Xu,
Tristan Weber,
David Mitchell
Abstract:
Thermal (<1 eV) electron density measurements, derived from the Mars Atmosphere and Volatile Evolution's (MAVEN) Langmuir Probe and Waves (LPW) instrument, are analyzed to produce the first statistical study of the thermal electron population in the Martian magnetotail. Coincident measurements of the local magnetic field are used to demonstrate that close to Mars, the thermal electron population i…
▽ More
Thermal (<1 eV) electron density measurements, derived from the Mars Atmosphere and Volatile Evolution's (MAVEN) Langmuir Probe and Waves (LPW) instrument, are analyzed to produce the first statistical study of the thermal electron population in the Martian magnetotail. Coincident measurements of the local magnetic field are used to demonstrate that close to Mars, the thermal electron population is most likely to be observed at a cylindrical distance of ~1.1 Mars radii (RM) from the central tail region during times when the magnetic field flares inward toward the central tail, compared to ~1.3 RM during times when the magnetic field flares outward away from the central tail. Similar patterns are observed further down the magnetotail with greater variability. Thermal electron densities are highly variable throughout the magnetotail; average densities are typically ~20-50 /cc within the optical shadow of Mars and can peak at ~100 /cc just outside of the optical shadow. Standard deviations of 100% are observed for average densities measured throughout the tail. Analysis of the local magnetic field topology suggests that thermal electrons observed within the optical shadow of Mars are likely sourced from the nightside ionosphere, whereas electrons observed just outside of the optical shadow are likely sourced from the dayside ionosphere. Finally, thermal electrons within the optical shadow of Mars are up to 20% more likely to be observed when the strongest crustal magnetic fields point sunward than when they point tailward.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Deep Convolutional Neural Networks to Predict Mutual Coupling Effects in Metasurfaces
Authors:
Sensong An,
Bowen Zheng,
Mikhail Y. Shalaginov,
Hong Tang,
Hang Li,
Li Zhou,
Yunxi Dong,
Mohammad Haerinia,
Anuradha Murthy Agarwal,
Clara Rivero-Baleine,
Myungkoo Kang,
Kathleen A. Richardson,
Tian Gu,
Juejun Hu,
Clayton Fowler,
Hualiang Zhang
Abstract:
Metasurfaces have provided a novel and promising platform for the realization of compact and large-scale optical devices. The conventional metasurface design approach assumes periodic boundary conditions for each element, which is inaccurate in most cases since the near-field coupling effects between elements will change when surrounded by non-identical structures. In this paper, we propose a deep…
▽ More
Metasurfaces have provided a novel and promising platform for the realization of compact and large-scale optical devices. The conventional metasurface design approach assumes periodic boundary conditions for each element, which is inaccurate in most cases since the near-field coupling effects between elements will change when surrounded by non-identical structures. In this paper, we propose a deep learning approach to predict the actual electromagnetic (EM) responses of each target meta-atom placed in a large array with near-field coupling effects taken into account. The predicting neural network takes the physical specifications of the target meta-atom and its neighbors as input, and calculates its phase and amplitude in milliseconds. This approach can be applied to explain metasurfaces' performance deterioration caused by mutual coupling and further used to optimize their efficiencies once combined with optimization algorithms. To demonstrate the efficacy of this methodology, we obtain large improvements in efficiency for a beam deflector and a metalens over the conventional design approach. Moreover, we show the correlations between a metasurface's performance and its design errors caused by mutual coupling are not bound to certain specifications (materials, shapes, etc.). As such, we envision that this approach can be readily applied to explore the mutual coupling effects and improve the performance of various metasurface designs.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
The development of deep-ocean anoxia in a comprehensive ocean phosphorus model
Authors:
J. G. Donohue,
B. J. Florio,
A. C. Fowler
Abstract:
We analyse a model of the phosphorus cycle in the ocean given by Slomp and Van Cappellen (2007, https://doi.org/10.5194/bg-4-155-2007). This model contains four distinct oceanic basins and includes relevant parts of the water, carbon and oxygen cycles. We show that the model can essentially be solved analytically, and its behaviour completely understood without recourse to numerical methods. In pa…
▽ More
We analyse a model of the phosphorus cycle in the ocean given by Slomp and Van Cappellen (2007, https://doi.org/10.5194/bg-4-155-2007). This model contains four distinct oceanic basins and includes relevant parts of the water, carbon and oxygen cycles. We show that the model can essentially be solved analytically, and its behaviour completely understood without recourse to numerical methods. In particular, we show that, in the model, the carbon and phosphorus concentrations in the different ocean reservoirs are all slaved to the concentration of soluble reactive phosphorus in the deep ocean, which relaxes to an equilibrium on a time scale of 180,000 y, and we show that the deep ocean is either oxic or anoxic, depending on a critical parameter which we can determine explicitly. Finally, we examine how the value of this critical parameter depends on the physical parameters contained in the model. The presented methodology is based on tools from applied mathematics and can be used to reduce the complexity of other large, biogeochemical models.
△ Less
Submitted 1 June, 2023; v1 submitted 19 August, 2020;
originally announced August 2020.
-
Electrically Reconfigurable Nonvolatile Metasurface Using Low-Loss Optical Phase Change Material
Authors:
Yifei Zhang,
Clayton Fowler,
Junhao Liang,
Bilal Azhar,
Mikhail Y. Shalaginov,
Skylar Deckoff-Jones,
Sensong An,
Jeffrey B. Chou,
Christopher M. Roberts,
Vladimir Liberman,
Myungkoo Kang,
Carlos Ríos,
Kathleen A. Richardson,
Clara Rivero-Baleine,
Tian Gu,
Hualiang Zhang,
Juejun Hu
Abstract:
Active metasurfaces promise reconfigurable optics with drastically improved compactness, ruggedness, manufacturability, and functionality compared to their traditional bulk counterparts. Optical phase change materials (O-PCMs) offer an appealing material solution for active metasurface devices with their large index contrast and nonvolatile switching characteristics. Here we report what we believe…
▽ More
Active metasurfaces promise reconfigurable optics with drastically improved compactness, ruggedness, manufacturability, and functionality compared to their traditional bulk counterparts. Optical phase change materials (O-PCMs) offer an appealing material solution for active metasurface devices with their large index contrast and nonvolatile switching characteristics. Here we report what we believe to be the first electrically reconfigurable nonvolatile metasurfaces based on O-PCMs. The O-PCM alloy used in the devices, Ge2Sb2Se4Te1 (GSST), uniquely combines giant non-volatile index modulation capability, broadband low optical loss, and a large reversible switching volume, enabling significantly enhanced light-matter interactions within the active O-PCM medium. Capitalizing on these favorable attributes, we demonstrated continuously tunable active metasurfaces with record half-octave spectral tuning range and large optical contrast of over 400%. We further prototyped a polarization-insensitive phase-gradient metasurface to realize dynamic optical beam steering.
△ Less
Submitted 2 September, 2020; v1 submitted 15 August, 2020;
originally announced August 2020.
-
Classification of Radio Signals Using Truncated Gaussian Discriminant Analysis of Convolutional Neural Network-Derived Features
Authors:
J. B. Persons,
Lauren J. Wong,
W. Chris Headley,
Michael C. Fowler
Abstract:
To improve the utility and scalability of distributed radio frequency (RF) sensor and communication networks, reduce the need for convolutional neural network (CNN) retraining, and efficiently share learned information about signals, we examined a supervised bootstrap** approach for RF modulation classification. We show that CNN-bootstrapped features of new and existing modulation classes can be…
▽ More
To improve the utility and scalability of distributed radio frequency (RF) sensor and communication networks, reduce the need for convolutional neural network (CNN) retraining, and efficiently share learned information about signals, we examined a supervised bootstrap** approach for RF modulation classification. We show that CNN-bootstrapped features of new and existing modulation classes can be considered as mixtures of truncated Gaussian distributions, allowing for maximumlikelihood-based classification of new classes without retraining the network. In this work, the authors observed classification performance using maximum likelihood estimation of CNNbootstrapped features to be comparable to that of a CNN trained on all classes, even for those classes on which the bootstrap** CNN was not trained. This performance was achieved while reducing the number of parameters needed for new class definition from over 8 million to only 200. Furthermore, some physical features of interest, not directly labeled during training, e.g. signal-to-noise ratio (SNR), can be learned or estimated from these same CNN-derived features. Finally, we show that SNR estimation accuracy is highest when classification accuracy is lowest and therefore can be used to calibrate a confidence in the classification.
△ Less
Submitted 11 August, 2020;
originally announced August 2020.
-
A Freeform Dielectric Metasurface Modeling Approach Based on Deep Neural Networks
Authors:
Sensong An,
Bowen Zheng,
Mikhail Y. Shalaginov,
Hong Tang,
Hang Li,
Li Zhou,
Jun Ding,
Anuradha Murthy Agarwal,
Clara Rivero-Baleine,
Myungkoo Kang,
Kathleen A. Richardson,
Tian Gu,
Juejun Hu,
Clayton Fowler,
Hualiang Zhang
Abstract:
Metasurfaces have shown promising potentials in sha** optical wavefronts while remaining compact compared to bulky geometric optics devices. Design of meta-atoms, the fundamental building blocks of metasurfaces, relies on trial-and-error method to achieve target electromagnetic responses. This process includes the characterization of an enormous amount of different meta-atom designs with differe…
▽ More
Metasurfaces have shown promising potentials in sha** optical wavefronts while remaining compact compared to bulky geometric optics devices. Design of meta-atoms, the fundamental building blocks of metasurfaces, relies on trial-and-error method to achieve target electromagnetic responses. This process includes the characterization of an enormous amount of different meta-atom designs with different physical and geometric parameters, which normally demands huge computational resources. In this paper, a deep learning-based metasurface/meta-atom modeling approach is introduced to significantly reduce the characterization time while maintaining accuracy. Based on a convolutional neural network (CNN) structure, the proposed deep learning network is able to model meta-atoms with free-form 2D patterns and different lattice sizes, material refractive indexes and thicknesses. Moreover, the presented approach features the capability to predict meta-atoms' wide spectrum responses in the timescale of milliseconds, which makes it attractive for applications such as fast meta-atom/metasurface on-demand designs and optimizations.
△ Less
Submitted 31 December, 2019;
originally announced January 2020.
-
Reconfigurable all-dielectric metalens with diffraction limited performance
Authors:
Mikhail Y. Shalaginov,
Sensong An,
Yifei Zhang,
Fan Yang,
Peter Su,
Vladimir Liberman,
Jeffrey B. Chou,
Christopher M. Roberts,
Myungkoo Kang,
Carlos Rios,
Qingyang Du,
Clayton Fowler,
Anuradha Agarwal,
Kathleen Richardson,
Clara Rivero-Baleine,
Hualiang Zhang,
Juejun Hu,
Tian Gu
Abstract:
Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency especially for non mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning co…
▽ More
Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency especially for non mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning covering the full 2$π$ range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling switching of metasurfaces between two arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for active meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 $μ$m wavelength. The metalens is constructed using Ge2Sb2Se4Te1 (GSST), an O-PCM with a large refractive index contrast ($Δ$ n > 1) and unique broadband low-loss characteristics in both amorphous and crystalline states. The reconfigurable metalens features focusing efficiencies above 20% at both states for linearly polarized light and a record large switching contrast ratio of 29.5 dB. We further validated aberration-free imaging using the metalens at both optical states, which represents the first experimental demonstration of a non-mechanical active metalens with diffraction-limited performance.
△ Less
Submitted 10 December, 2019; v1 submitted 29 November, 2019;
originally announced November 2019.
-
Quasi-steady uptake and bacterial community assembly in a mathematical model of soil-phosphorus mobility
Authors:
Iain R Moyles,
John G. Donohue,
Andrew C. Fowler
Abstract:
We mathematically model the uptake of phosphorus by a soil community consisting of a plant and two bacterial groups: copiotrophs and oligotrophs. Four equilibrium states emerge, one for each of the species monopolising the resource and dominating the community and one with coexistence of all species. We show that the dynamics are controlled by the ratio of chemical adsorption to bacterial death pe…
▽ More
We mathematically model the uptake of phosphorus by a soil community consisting of a plant and two bacterial groups: copiotrophs and oligotrophs. Four equilibrium states emerge, one for each of the species monopolising the resource and dominating the community and one with coexistence of all species. We show that the dynamics are controlled by the ratio of chemical adsorption to bacterial death permitting either oscillatory states or quasi-steady uptake. We show how a steady state can emerge which has soil and plant nutrient content unresponsive to increased fertilization. However, the additional fertilization supports the copiotrophs leading to community reassembly. Our results demonstrate the importance of time-series measurements in nutrient uptake experiments.
△ Less
Submitted 26 October, 2020; v1 submitted 10 September, 2019;
originally announced September 2019.
-
Mars' plasma system. Scientific potential of coordinated multi-point missions: "The next generation" (A White Paper submitted to ESA's Voyage 2050 Call)
Authors:
Beatriz Sánchez-Cano,
Mark Lester,
David J. Andrews,
Hermann Opgenoorth,
Robert Lillis,
François Leblanc,
Christopher M. Fowler,
Xiaohua Fang,
Oleg Vaisberg,
Majd Mayyasi,
Mika Holmberg,
**gnan Guo,
Maria Hamrin,
Christian Mazelle,
Kerstin Peter,
Martin Pätzold,
Katerina Stergiopoulou,
Charlotte Goetz,
Vladimir Nikolaevich Ermakov,
Sergei Shuvalov,
James Wild,
Pierre-Louis Blelly,
Michael Mendillo,
Cesar Bertucci,
Marco Cartacci
, et al. (5 additional authors not shown)
Abstract:
The objective of this White Paper submitted to ESA's Voyage 2050 call is to get a more holistic knowledge of the dynamics of the Martian plasma system from its surface up to the undisturbed solar wind outside of the induced magnetosphere. This can only be achieved with coordinated multi-point observations with high temporal resolution as they have the scientific potential to track the whole dynami…
▽ More
The objective of this White Paper submitted to ESA's Voyage 2050 call is to get a more holistic knowledge of the dynamics of the Martian plasma system from its surface up to the undisturbed solar wind outside of the induced magnetosphere. This can only be achieved with coordinated multi-point observations with high temporal resolution as they have the scientific potential to track the whole dynamics of the system (from small to large scales), and they constitute the next generation of Mars' exploration as it happened at Earth few decades ago. This White Paper discusses the key science questions that are still open at Mars and how they could be addressed with coordinated multipoint missions. The main science questions are: (i) How does solar wind driving impact on magnetospheric and ionospheric dynamics? (ii) What is the structure and nature of the tail of Mars' magnetosphere at all scales? (iii) How does the lower atmosphere couple to the upper atmosphere? (iv) Why should we have a permanent in-situ Space Weather monitor at Mars? Each science question is devoted to a specific plasma region, and includes several specific scientific objectives to study in the coming decades. In addition, two mission concepts are also proposed based on coordinated multi-point science from a constellation of orbiting and ground-based platforms, which focus on understanding and solving the current science gaps.
△ Less
Submitted 15 August, 2019;
originally announced August 2019.
-
Multifunctional Metasurface Design with a Generative Adversarial Network
Authors:
Sensong An,
Bowen Zheng,
Hong Tang,
Mikhail Y. Shalaginov,
Li Zhou,
Hang Li,
Tian Gu,
Juejun Hu,
Clayton Fowler,
Hualiang Zhang
Abstract:
Metasurfaces have enabled precise electromagnetic wave manipulation with strong potential to obtain unprecedented functionalities and multifunctional behavior in flat optical devices. These advantages in precision and functionality come at the cost of tremendous difficulty in finding individual meta-atom structures based on specific requirements (commonly formulated in terms of electromagnetic res…
▽ More
Metasurfaces have enabled precise electromagnetic wave manipulation with strong potential to obtain unprecedented functionalities and multifunctional behavior in flat optical devices. These advantages in precision and functionality come at the cost of tremendous difficulty in finding individual meta-atom structures based on specific requirements (commonly formulated in terms of electromagnetic responses), which makes the design of multifunctional metasurfaces a key challenge in this field. In this paper, we present a Generative Adversarial Networks (GAN) that can tackle this problem and generate meta-atom/metasurface designs to meet multifunctional design goals. Unlike conventional trial-and-error or iterative optimization design methods, this new methodology produces on-demand free-form structures involving only a single design iteration. More importantly, the network structure and the robust training process are independent of the complexity of design objectives, making this approach ideal for multifunctional device design. Additionally, the ability of the network to generate distinct classes of structures with similar electromagnetic responses but different physical features could provide added latitude to accommodate other considerations such as fabrication constraints and tolerances. We demonstrate the network's ability to produce a variety of multifunctional metasurface designs by presenting a bifocal metalens, a polarization-multiplexed beam deflector, a polarization-multiplexed metalens and a polarization-independent metalens.
△ Less
Submitted 4 April, 2020; v1 submitted 13 August, 2019;
originally announced August 2019.
-
A Novel Modeling Approach for All-Dielectric Metasurfaces Using Deep Neural Networks
Authors:
Sensong An,
Clayton Fowler,
Bowen Zheng,
Mikhail Y. Shalaginov,
Hong Tang,
Hang Li,
Li Zhou,
Jun Ding,
Anuradha Murthy Agarwal,
Clara Rivero-Baleine,
Kathleen A. Richardson,
Tian Gu,
Juejun Hu,
Hualiang Zhang
Abstract:
Metasurfaces have become a promising means for manipulating optical wavefronts in flat and high-performance optical devices. Conventional metasurface device design relies on trial-and-error methods to obtain target electromagnetic (EM) response, an approach that demands significant efforts to investigate the enormous number of possible meta-atom structures. In this paper, a deep neural network app…
▽ More
Metasurfaces have become a promising means for manipulating optical wavefronts in flat and high-performance optical devices. Conventional metasurface device design relies on trial-and-error methods to obtain target electromagnetic (EM) response, an approach that demands significant efforts to investigate the enormous number of possible meta-atom structures. In this paper, a deep neural network approach is introduced that significantly improves on both speed and accuracy compared to techniques currently used to assemble metasurface-based devices. Our neural network approach overcomes three key challenges that have limited previous neural-network-based design schemes: input/output vector dimensional mismatch, accurate EM-wave phase prediction, as well as adaptation to 3-D dielectric structures, and can be generically applied to a wide variety of metasurface device designs across the entire electromagnetic spectrum. Using this new methodology, examples of neural networks capable of producing on-demand designs for meta-atoms, metasurface filters, and phase-change reconfigurable metasurfaces are demonstrated.
△ Less
Submitted 8 June, 2019;
originally announced June 2019.
-
Determining satisfiability of 3-SAT in polynomial time
Authors:
Ortho Flint,
Asanka Wickramasinghe,
Jason Brasse,
Christopher Fowler
Abstract:
In this paper, we provide a deterministic polynomial time algorithm that determines satisfiability of 3-SAT. The complexity analysis for the algorithm takes into account no efficiency and yet provides a low enough bound, that efficient versions are practical with respect to today's hardware. We accompany this paper with a serial version of the algorithm without non-trivial efficiencies (link: poly…
▽ More
In this paper, we provide a deterministic polynomial time algorithm that determines satisfiability of 3-SAT. The complexity analysis for the algorithm takes into account no efficiency and yet provides a low enough bound, that efficient versions are practical with respect to today's hardware. We accompany this paper with a serial version of the algorithm without non-trivial efficiencies (link: polynomial3sat.org).
△ Less
Submitted 1 July, 2020; v1 submitted 24 March, 2019;
originally announced March 2019.
-
Intelligent Knowledge Distribution: Constrained-Action POMDPs for Resource-Aware Multi-Agent Communication
Authors:
Michael C. Fowler,
T. Charles Clancy,
Ryan K. Williams
Abstract:
This paper addresses a fundamental question of multi-agent knowledge distribution: what information should be sent to whom and when, with the limited resources available to each agent? Communication requirements for multi-agent systems can be rather high when an accurate picture of the environment and the state of other agents must be maintained. To reduce the impact of multi-agent coordination on…
▽ More
This paper addresses a fundamental question of multi-agent knowledge distribution: what information should be sent to whom and when, with the limited resources available to each agent? Communication requirements for multi-agent systems can be rather high when an accurate picture of the environment and the state of other agents must be maintained. To reduce the impact of multi-agent coordination on networked systems, e.g., power and bandwidth, this paper introduces two concepts for partially observable Markov decision processes (POMDPs): 1) action-based constraints which yield constrained-action POMDPs (CA-POMDPs); and 2) soft probabilistic constraint satisfaction for the resulting infinite-horizon controllers. To enable constraint analysis over an infinite horizon, an unconstrained policy is first represented as a Finite State Controller (FSC) and optimized with policy iteration. The FSC representation then allows for a combination of Markov chain Monte Carlo and discrete optimization to improve the probabilistic constraint satisfaction of the controller while minimizing the impact to the value function. Within the CA-POMDP framework we then propose Intelligent Knowledge Distribution (IKD) which yields per-agent policies for distributing knowledge between agents subject to interaction constraints. Finally, the CA-POMDP and IKD concepts are validated using an asset tracking problem where multiple unmanned aerial vehicles (UAVs) with heterogeneous sensors collaborate to localize a ground asset to assist in avoiding unseen obstacles in a disaster area. The IKD model was able to maintain asset tracking through multi-agent communications while only violating soft power and bandwidth constraints 3% of the time, while greedy and naive approaches violated constraints more than 60% of the time.
△ Less
Submitted 7 March, 2019;
originally announced March 2019.
-
A Metamaterial-inspired Approach to RF Energy Harvesting
Authors:
Clayton Fowler,
Jiangfeng Zhou
Abstract:
We demonstrate an RF energy harvesting rectenna design based on a metamaterial perfect absorber (MPA). With the embedded Schottky diodes, the rectenna converts captured RF waves to DC power. The Fabry-Perot (FP) cavity resonance of the MPA greatly improves the amount of energy captured. Furthermore, the FP resonance exhibits a high Q-factor and significantly increases the voltage across the Schott…
▽ More
We demonstrate an RF energy harvesting rectenna design based on a metamaterial perfect absorber (MPA). With the embedded Schottky diodes, the rectenna converts captured RF waves to DC power. The Fabry-Perot (FP) cavity resonance of the MPA greatly improves the amount of energy captured. Furthermore, the FP resonance exhibits a high Q-factor and significantly increases the voltage across the Schottky diodes, which improves the rectification efficiency, particularly at low power. This leads to factor of 16 improvement of RF-DC conversion efficiency at ambient intensity level.
△ Less
Submitted 7 May, 2017;
originally announced May 2017.
-
A Highly Efficient Polarization-Independent Metamaterial-Based RF Energy-Harvesting Rectenna for Low-Power Applications
Authors:
Clayton Fowler,
Jiangfeng Zhou
Abstract:
A highly-efficient multi-resonant RF energy-harvesting rectenna based on a metamaterial perfect absorber featuring closely-spaced polarization-independent absorption modes is presented. Its effective area is larger than its physical area, and so efficiencies of 230% and 130% are measured at power densities of 10 uW/cm2 and 1 uW/cm2 respectively, for a linear absorption mode at 0.75 GHz. The recten…
▽ More
A highly-efficient multi-resonant RF energy-harvesting rectenna based on a metamaterial perfect absorber featuring closely-spaced polarization-independent absorption modes is presented. Its effective area is larger than its physical area, and so efficiencies of 230% and 130% are measured at power densities of 10 uW/cm2 and 1 uW/cm2 respectively, for a linear absorption mode at 0.75 GHz. The rectenna exhibits a broad polarization-independent region between 1.4 GHz and 1.7 GHz with maximum efficiencies of 167% and 36% for those same power densities. Additionally, by adjustment of the distance between the rectenna and a reflecting ground plane, the absorption frequency can be adjusted to a limited extent within the polarization-independent region. Lastly, the rectenna should be capable of delivering 100 uW of power to a device located within 50 m of a cell-phone tower under ideal conditions.
△ Less
Submitted 7 May, 2017;
originally announced May 2017.
-
Ewens sampling and invariable generation
Authors:
Gerandy Brito,
Christopher Fowler,
Matthew Junge,
Avi Levy
Abstract:
We study the number of random permutations needed to invariably generate the symmetric group, $S_n$, when the distribution of cycle counts has the strong $α$-logarithmic property. The canonical example is the Ewens sampling formula, for which the number of $k$-cycles relates to a conditioned Poisson random variable with mean $α/k$. The special case $α=1$ corresponds to uniformly random permutation…
▽ More
We study the number of random permutations needed to invariably generate the symmetric group, $S_n$, when the distribution of cycle counts has the strong $α$-logarithmic property. The canonical example is the Ewens sampling formula, for which the number of $k$-cycles relates to a conditioned Poisson random variable with mean $α/k$. The special case $α=1$ corresponds to uniformly random permutations, for which it was recently shown that exactly four are needed. For strong $α$-logarithmic measures, and almost every $α$, we show that precisely $\left\lceil ( 1- α\log 2 )^{-1} \right\rceil$ permutations are needed to invariably generate $S_n$. A corollary is that for many other probability measures on $S_n$ no bounded number of permutations will invariably generate $S_n$ with positive probability. Along the way we generalize classic theorems of Erdős, Tehran, Pyber, Luczak and Bovey to permutations obtained from the Ewens sampling formula.
△ Less
Submitted 15 October, 2016; v1 submitted 13 October, 2016;
originally announced October 2016.
-
Subglacial hydrology as a control on emergence, scale, and spacing of ice streams
Authors:
T. M. Kyrke-Smith,
R. F. Katz,
A. C. Fowler
Abstract:
Observations have long associated ice streams with the presence of meltwater at the bed. More recently, theoretical models have been able to reproduce ice-stream behaviour as a consequence of the coupled dynamics of ice and subglacial meltwater. In this paper we analyse the properties of ice streams that form in a coupled model of ice flow and subglacial hydrology. We see that there is a natural l…
▽ More
Observations have long associated ice streams with the presence of meltwater at the bed. More recently, theoretical models have been able to reproduce ice-stream behaviour as a consequence of the coupled dynamics of ice and subglacial meltwater. In this paper we analyse the properties of ice streams that form in a coupled model of ice flow and subglacial hydrology. We see that there is a natural length scale defining ice stream separation and width. This arises as a result of the balance between effective pressure gradients driving meltwater away from ice streams and the enhanced water production in the streams due to the fast ice flow. We further discuss how the model interacts with topography and we show that small perturbations to a uniform bed have a strong effect on where ice streams emerge in the model. However, in many cases ice streams then evolve to be closer to the dimensions defined by the natural length scale of the unperturbed system. The non-dimensional parameter that defines this length scale is therefore of fundamental importance in the model.
△ Less
Submitted 28 July, 2015;
originally announced December 2015.
-
Generalized Random Simplicial Complexes
Authors:
Christopher F. Fowler
Abstract:
We consider a multi-parameter model for randomly constructing simplicial complexes. This model interpolates between random clique complexes and Linial-Meshulam random $k$-dimensional complexes, two models that have been extensively studied. While these models asymptotically exhibit nontrivial cohomology in only one or two dimensions, we show that in this generalized setting nontrivial cohomology c…
▽ More
We consider a multi-parameter model for randomly constructing simplicial complexes. This model interpolates between random clique complexes and Linial-Meshulam random $k$-dimensional complexes, two models that have been extensively studied. While these models asymptotically exhibit nontrivial cohomology in only one or two dimensions, we show that in this generalized setting nontrivial cohomology can occur in several dimensions simultaneously. We establish upper and lower thresholds for the appearance of nontrivial cohomology in a particular dimension, and in some instances characterize the behavior at criticality.
△ Less
Submitted 2 June, 2015; v1 submitted 5 March, 2015;
originally announced March 2015.
-
Application of Cybernetics and Control Theory for a New Paradigm in Cybersecurity
Authors:
Michael D. Adams,
Seth D. Hitefield,
Bruce Hoy,
Michael C. Fowler,
T. Charles Clancy
Abstract:
A significant limitation of current cyber security research and techniques is its reactive and applied nature. This leads to a continuous 'cyber cycle' of attackers scanning networks, develo** exploits and attacking systems, with defenders detecting attacks, analyzing exploits and patching systems. This reactive nature leaves sensitive systems highly vulnerable to attack due to un-patched system…
▽ More
A significant limitation of current cyber security research and techniques is its reactive and applied nature. This leads to a continuous 'cyber cycle' of attackers scanning networks, develo** exploits and attacking systems, with defenders detecting attacks, analyzing exploits and patching systems. This reactive nature leaves sensitive systems highly vulnerable to attack due to un-patched systems and undetected exploits. Some current research attempts to address this major limitation by introducing systems that implement moving target defense. However, these ideas are typically based on the intuition that a moving target defense will make it much harder for attackers to find and scan vulnerable systems, and not on theoretical mathematical foundations. The continuing lack of fundamental science and principles for develo** more secure systems has drawn increased interest into establishing a 'science of cyber security'. This paper introduces the concept of using cybernetics, an interdisciplinary approach of control theory, systems theory, information theory and game theory applied to regulatory systems, as a foundational approach for develo** cyber security principles. It explores potential applications of cybernetics to cyber security from a defensive perspective, while suggesting the potential use for offensive applications. Additionally, this paper introduces the fundamental principles for building non-stationary systems, which is a more general solution than moving target defenses. Lastly, the paper discusses related works concerning the limitations of moving target defense and one implementation based on non-stationary principles.
△ Less
Submitted 1 November, 2013;
originally announced November 2013.
-
Ramanujan sums as supercharacters
Authors:
Christopher F. Fowler,
Stephan Ramon Garcia,
Gizem Karaali
Abstract:
The theory of supercharacters, recently developed by Diaconis-Isaacs and Andre, can be used to derive the fundamental algebraic properties of Ramanujan sums. This machinery frequently yields one-line proofs of difficult identities and provides many novel formulas. In addition to exhibiting a new application of supercharacter theory, this article also serves as a blueprint for future work since som…
▽ More
The theory of supercharacters, recently developed by Diaconis-Isaacs and Andre, can be used to derive the fundamental algebraic properties of Ramanujan sums. This machinery frequently yields one-line proofs of difficult identities and provides many novel formulas. In addition to exhibiting a new application of supercharacter theory, this article also serves as a blueprint for future work since some of the abstract results we develop are applicable in much greater generality.
△ Less
Submitted 14 December, 2012; v1 submitted 4 January, 2012;
originally announced January 2012.
-
Blowing of polysilicon fuses
Authors:
W. T. Lee,
A. C. Fowler,
O. Power,
S. Healy,
J. Browne
Abstract:
Polysilicon fuses are one time programmable memory elements which allow the calibration of integrated circuits at wafer and package level. We present a zero dimensional lumped parameter model of the programming of fuses made from a combination of tungsten silicide and polycrystalline silicon. The components of the model are an electrical model, a thermal model and a flow model. The electrical mode…
▽ More
Polysilicon fuses are one time programmable memory elements which allow the calibration of integrated circuits at wafer and package level. We present a zero dimensional lumped parameter model of the programming of fuses made from a combination of tungsten silicide and polycrystalline silicon. The components of the model are an electrical model, a thermal model and a flow model. The electrical model describes the temperature and geometry dependent resistance of the fuse. The thermal model describes the heating and melting of the fuse and its surroundings. The flow model describes the disconnection of the fuse by electromigration driven flow of silica. The model generates quantitatively accurate results and reproduces trends with applied voltage and fuse size.
△ Less
Submitted 22 March, 2011;
originally announced March 2011.
-
Precise Predictions for Higgs Production in Neutralino Decays
Authors:
A. C. Fowler
Abstract:
Complete one-loop results, supplemented by two-loop Higgs propagator-type corrections, are obtained for the class of processes chi^0_i->chi^0_j h_a in the MSSM with CP-violating phases for parameters entering the process beyond lowest order. The parameter region of the CPX benchmark scenario where a very light Higgs boson is unexcluded by present data is analysed in detail. We find that the deca…
▽ More
Complete one-loop results, supplemented by two-loop Higgs propagator-type corrections, are obtained for the class of processes chi^0_i->chi^0_j h_a in the MSSM with CP-violating phases for parameters entering the process beyond lowest order. The parameter region of the CPX benchmark scenario where a very light Higgs boson is unexcluded by present data is analysed in detail. We find that the decay chi^0_2->chi^0_1 h_1 may offer good prospects to detect such a light Higgs boson.
△ Less
Submitted 30 September, 2009;
originally announced September 2009.
-
Precise Predictions for Higgs Production in Neutralino Decays in the Complex MSSM
Authors:
A. C. Fowler,
G. Weiglein
Abstract:
Complete one-loop results are obtained for the class of processes chi^0_i->chi^0_j h_a in the MSSM where all parameters entering this process beyond lowest order are allowed to have arbitrary CP-violating phases. An on-shell renormalisation scheme is worked out for the chargino-neutralino sector that properly takes account of imaginary parts arising from complex parameters and from absorptive pa…
▽ More
Complete one-loop results are obtained for the class of processes chi^0_i->chi^0_j h_a in the MSSM where all parameters entering this process beyond lowest order are allowed to have arbitrary CP-violating phases. An on-shell renormalisation scheme is worked out for the chargino-neutralino sector that properly takes account of imaginary parts arising from complex parameters and from absorptive parts of loop integrals. The genuine vertex contributions to the neutralino decay amplitudes are combined with two-loop propagator-type corrections for the outgoing Higgs boson. In this way the currently most precise prediction for this class of processes is obtained. The numerical impact of the genuine vertex corrections is studied for several examples of CP-conserving and CP-violating scenarios. We find that significant effects on the decay widths and branching ratios are possible even in the CP-conserving MSSM. In the CP-violating CPX benchmark scenario the corrections to the decay width are found to be particularly large, namely, of order 45% for a Higgs mass of 40 GeV. This parameter region of the CPX scenario where a very light Higgs boson is unexcluded by present data is analysed in detail. We find that in this parameter region, which will be difficult to cover by standard Higgs search channels at the LHC, the branching ratio for the decay chi^0_2->chi^0_1 h_1 is large. This may offer good prospects to detect such a light Higgs boson in cascade decays of supersymmetric particles.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
Oscillations in a maturation model of blood cell production
Authors:
Ivana Drobnjak,
A. C. Fowler,
Michael C. Mackey
Abstract:
In this paper we use a continuous model to describe the development of a single cell lineage following the committal of stem cells. Three separate controls are implemented in the model, namely the proliferative control of stem cells, the proliferative control of develo** blast cells, and the peripheral control of stem cell committal by circulating blood cell density. We show that variation of…
▽ More
In this paper we use a continuous model to describe the development of a single cell lineage following the committal of stem cells. Three separate controls are implemented in the model, namely the proliferative control of stem cells, the proliferative control of develo** blast cells, and the peripheral control of stem cell committal by circulating blood cell density. We show that variation of parameters in all three control systems can cause oscillations, and that the characters of these oscillations are very different. This allows us some potential insight into the mechanisms that may be operative in some of the dynamic blood diseases like cyclical neutropenia and periodic chronic myelogenous leukemia.
△ Less
Submitted 31 August, 2004;
originally announced September 2004.
